3bed96894e2fe6fedb68ac3fb5d8e7ee8ecc078c
[hcoop/zz_old/machine-template.git] / preseed / preseed-test-0.cfg
1 #### Contents of the preconfiguration file (for squeeze)
2 ### Localization
3 # Preseeding only locale sets language, country and locale.
4 d-i debian-installer/locale string en_US
5
6 # The values can also be preseeded individually for greater flexibility.
7 #d-i debian-installer/language string en
8 #d-i debian-installer/country string NL
9 #d-i debian-installer/locale string en_GB.UTF-8
10 # Optionally specify additional locales to be generated.
11 #d-i localechooser/supported-locales en_US.UTF-8, nl_NL.UTF-8
12
13 # Keyboard selection.
14 #d-i console-tools/archs select at
15 d-i console-keymaps-at/keymap select us
16 d-i keyboard-configuration/xkb-keymap select us
17 # Example for a different keyboard architecture
18 #d-i console-keymaps-usb/keymap select mac-usb-us
19
20 ### Network configuration
21 # Disable network configuration entirely. This is useful for cdrom
22 # installations on non-networked devices where the network questions,
23 # warning and long timeouts are a nuisance.
24 #d-i netcfg/enable boolean false
25
26 # netcfg will choose an interface that has link if possible. This makes it
27 # skip displaying a list if there is more than one interface.
28 d-i netcfg/choose_interface select auto
29
30 # To pick a particular interface instead:
31 #d-i netcfg/choose_interface select eth1
32
33 # If you have a slow dhcp server and the installer times out waiting for
34 # it, this might be useful.
35 #d-i netcfg/dhcp_timeout string 60
36
37 # If you prefer to configure the network manually, uncomment this line and
38 # the static network configuration below.
39 #d-i netcfg/disable_dhcp boolean true
40
41 # If you want the preconfiguration file to work on systems both with and
42 # without a dhcp server, uncomment these lines and the static network
43 # configuration below.
44 #d-i netcfg/dhcp_failed note
45 #d-i netcfg/dhcp_options select Configure network manually
46
47 # Static network configuration.
48 #d-i netcfg/get_nameservers string 192.168.1.1
49 #d-i netcfg/get_ipaddress string 192.168.1.42
50 #d-i netcfg/get_netmask string 255.255.255.0
51 #d-i netcfg/get_gateway string 192.168.1.1
52 #d-i netcfg/confirm_static boolean true
53
54 # Any hostname and domain names assigned from dhcp take precedence over
55 # values set here. However, setting the values still prevents the questions
56 # from being shown, even if values come from dhcp.
57 d-i netcfg/get_hostname string unassigned-hostname
58 d-i netcfg/get_domain string unassigned-domain
59
60 # Disable that annoying WEP key dialog.
61 d-i netcfg/wireless_wep string
62 # The wacky dhcp hostname that some ISPs use as a password of sorts.
63 #d-i netcfg/dhcp_hostname string radish
64
65 # If non-free firmware is needed for the network or other hardware, you can
66 # configure the installer to always try to load it, without prompting. Or
67 # change to false to disable asking.
68 #d-i hw-detect/load_firmware boolean true
69
70 ### Network console
71 # Use the following settings if you wish to make use of the network-console
72 # component for remote installation over SSH. This only makes sense if you
73 # intend to perform the remainder of the installation manually.
74 #d-i anna/choose_modules string network-console
75 #d-i network-console/password password r00tme
76 #d-i network-console/password-again password r00tme
77
78 ### Mirror settings
79 # If you select ftp, the mirror/country string does not need to be set.
80 #d-i mirror/protocol string ftp
81 d-i mirror/country string manual
82 d-i mirror/http/hostname string http.us.debian.org
83 d-i mirror/http/directory string /debian
84 d-i mirror/http/proxy string
85
86 # Suite to install.
87 #d-i mirror/suite string testing
88 # Suite to use for loading installer components (optional).
89 #d-i mirror/udeb/suite string testing
90
91 ### Account setup
92 # Skip creation of a root account (normal user account will be able to
93 # use sudo).
94 #d-i passwd/root-login boolean false
95 # Alternatively, to skip creation of a normal user account.
96 #d-i passwd/make-user boolean false
97
98 # Root password, either in clear text
99 #d-i passwd/root-password password r00tme
100 #d-i passwd/root-password-again password r00tme
101 # or encrypted using an MD5 hash.
102 #d-i passwd/root-password-crypted password [MD5 hash]
103
104 # To create a normal user account.
105 #d-i passwd/user-fullname string Debian User
106 #d-i passwd/username string debian
107 # Normal user's password, either in clear text
108 #d-i passwd/user-password password insecure
109 #d-i passwd/user-password-again password insecure
110 # or encrypted using an MD5 hash.
111 #d-i passwd/user-password-crypted password [MD5 hash]
112 # Create the first user with the specified UID instead of the default.
113 #d-i passwd/user-uid string 1010
114
115 # The user account will be added to some standard initial groups. To
116 # override that, use this.
117 #d-i passwd/user-default-groups string audio cdrom video
118
119 ### Clock and time zone setup
120 # Controls whether or not the hardware clock is set to UTC.
121 d-i clock-setup/utc boolean true
122
123 # You may set this to any valid setting for $TZ; see the contents of
124 # /usr/share/zoneinfo/ for valid values.
125 d-i time/zone string US/Eastern
126
127 # Controls whether to use NTP to set the clock during the install
128 d-i clock-setup/ntp boolean true
129 # NTP server to use. The default is almost always fine here.
130 #d-i clock-setup/ntp-server string ntp.example.com
131
132 ### Partitioning
133 ## Partitioning example
134 # If the system has free space you can choose to only partition that space.
135 # This is only honoured if partman-auto/method (below) is not set.
136 #d-i partman-auto/init_automatically_partition select biggest_free
137
138 # Alternatively, you may specify a disk to partition. If the system has only
139 # one disk the installer will default to using that, but otherwise the device
140 # name must be given in traditional, non-devfs format (so e.g. /dev/hda or
141 # /dev/sda, and not e.g. /dev/discs/disc0/disc).
142 # For example, to use the first SCSI/SATA hard disk:
143 #d-i partman-auto/disk string /dev/sda
144 # In addition, you'll need to specify the method to use.
145 # The presently available methods are:
146 # - regular: use the usual partition types for your architecture
147 # - lvm: use LVM to partition the disk
148 # - crypto: use LVM within an encrypted partition
149 d-i partman-auto/method string lvm
150
151 # If one of the disks that are going to be automatically partitioned
152 # contains an old LVM configuration, the user will normally receive a
153 # warning. This can be preseeded away...
154 d-i partman-lvm/device_remove_lvm boolean true
155 # The same applies to pre-existing software RAID array:
156 d-i partman-md/device_remove_md boolean true
157 # And the same goes for the confirmation to write the lvm partitions.
158 d-i partman-lvm/confirm boolean true
159
160 # You can choose one of the three predefined partitioning recipes:
161 # - atomic: all files in one partition
162 # - home: separate /home partition
163 # - multi: separate /home, /usr, /var, and /tmp partitions
164 d-i partman-auto/choose_recipe select atomic
165
166 # Or provide a recipe of your own...
167 # If you have a way to get a recipe file into the d-i environment, you can
168 # just point at it.
169 #d-i partman-auto/expert_recipe_file string /hd-media/recipe
170
171 # If not, you can put an entire recipe into the preconfiguration file in one
172 # (logical) line. This example creates a small /boot partition, suitable
173 # swap, and uses the rest of the space for the root partition:
174 #d-i partman-auto/expert_recipe string \
175 # boot-root :: \
176 # 40 50 100 ext3 \
177 # $primary{ } $bootable{ } \
178 # method{ format } format{ } \
179 # use_filesystem{ } filesystem{ ext3 } \
180 # mountpoint{ /boot } \
181 # . \
182 # 500 10000 1000000000 ext3 \
183 # method{ format } format{ } \
184 # use_filesystem{ } filesystem{ ext3 } \
185 # mountpoint{ / } \
186 # . \
187 # 64 512 300% linux-swap \
188 # method{ swap } format{ } \
189 # .
190
191 # The full recipe format is documented in the file partman-auto-recipe.txt
192 # included in the 'debian-installer' package or available from D-I source
193 # repository. This also documents how to specify settings such as file
194 # system labels, volume group names and which physical devices to include
195 # in a volume group.
196
197 # This makes partman automatically partition without confirmation, provided
198 # that you told it what to do using one of the methods above.
199 d-i partman-partitioning/confirm_write_new_label boolean true
200 d-i partman/choose_partition select finish
201 d-i partman/confirm boolean true
202 d-i partman/confirm_nooverwrite boolean true
203
204 ## Partitioning using RAID
205 # The method should be set to "raid".
206 #d-i partman-auto/method string raid
207 # Specify the disks to be partitioned. They will all get the same layout,
208 # so this will only work if the disks are the same size.
209 #d-i partman-auto/disk string /dev/sda /dev/sdb
210
211 # Next you need to specify the physical partitions that will be used.
212 #d-i partman-auto/expert_recipe string \
213 # multiraid :: \
214 # 1000 5000 4000 raid \
215 # $primary{ } method{ raid } \
216 # . \
217 # 64 512 300% raid \
218 # method{ raid } \
219 # . \
220 # 500 10000 1000000000 raid \
221 # method{ raid } \
222 # .
223
224 # Last you need to specify how the previously defined partitions will be
225 # used in the RAID setup. Remember to use the correct partition numbers
226 # for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
227 # devices are separated using "#".
228 # Parameters are:
229 # <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
230 # <devices> <sparedevices>
231
232 #d-i partman-auto-raid/recipe string \
233 # 1 2 0 ext3 / \
234 # /dev/sda1#/dev/sdb1 \
235 # . \
236 # 1 2 0 swap - \
237 # /dev/sda5#/dev/sdb5 \
238 # . \
239 # 0 2 0 ext3 /home \
240 # /dev/sda6#/dev/sdb6 \
241 # .
242
243 # For additional information see the file partman-auto-raid-recipe.txt
244 # included in the 'debian-installer' package or available from D-I source
245 # repository.
246
247 # This makes partman automatically partition without confirmation.
248 d-i partman-md/confirm boolean true
249 d-i partman-partitioning/confirm_write_new_label boolean true
250 d-i partman/choose_partition select finish
251 d-i partman/confirm boolean true
252 d-i partman/confirm_nooverwrite boolean true
253
254 ## Controlling how partitions are mounted
255 # The default is to mount by UUID, but you can also choose "traditional" to
256 # use traditional device names, or "label" to try filesystem labels before
257 # falling back to UUIDs.
258 #d-i partman/mount_style select uuid
259
260 ### Base system installation
261 # Configure APT to not install recommended packages by default. Use of this
262 # option can result in an incomplete system and should only be used by very
263 # experienced users.
264 #d-i base-installer/install-recommends boolean false
265
266 # Select the initramfs generator used to generate the initrd for 2.6 kernels.
267 #d-i base-installer/kernel/linux/initramfs-generators string initramfs-tools
268
269 # The kernel image (meta) package to be installed; "none" can be used if no
270 # kernel is to be installed.
271 #d-i base-installer/kernel/image string linux-image-2.6-486
272
273 ### Apt setup
274 # You can choose to install non-free and contrib software.
275 #d-i apt-setup/non-free boolean true
276 #d-i apt-setup/contrib boolean true
277 # Uncomment this if you don't want to use a network mirror.
278 #d-i apt-setup/use_mirror boolean false
279 # Select which update services to use; define the mirrors to be used.
280 # Values shown below are the normal defaults.
281 #d-i apt-setup/services-select multiselect security, volatile
282 #d-i apt-setup/security_host string security.debian.org
283 #d-i apt-setup/volatile_host string volatile.debian.org
284
285 # Additional repositories, local[0-9] available
286 #d-i apt-setup/local0/repository string \
287 # http://local.server/debian stable main
288 #d-i apt-setup/local0/comment string local server
289 # Enable deb-src lines
290 #d-i apt-setup/local0/source boolean true
291 # URL to the public key of the local repository; you must provide a key or
292 # apt will complain about the unauthenticated repository and so the
293 # sources.list line will be left commented out
294 #d-i apt-setup/local0/key string http://local.server/key
295
296 # By default the installer requires that repositories be authenticated
297 # using a known gpg key. This setting can be used to disable that
298 # authentication. Warning: Insecure, not recommended.
299 #d-i debian-installer/allow_unauthenticated boolean true
300
301 ### Package selection
302 #tasksel tasksel/first multiselect standard, web-server
303 # If the desktop task is selected, install the kde and xfce desktops
304 # instead of the default gnome desktop.
305 #tasksel tasksel/desktop multiselect kde, xfce
306
307 # Individual additional packages to install
308 #d-i pkgsel/include string openssh-server build-essential
309 # Whether to upgrade packages after debootstrap.
310 # Allowed values: none, safe-upgrade, full-upgrade
311 #d-i pkgsel/upgrade select none
312
313 # Some versions of the installer can report back on what software you have
314 # installed, and what software you use. The default is not to report back,
315 # but sending reports helps the project determine what software is most
316 # popular and include it on CDs.
317 #popularity-contest popularity-contest/participate boolean false
318
319 ### Finishing up the installation
320 # During installations from serial console, the regular virtual consoles
321 # (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
322 # line to prevent this.
323 #d-i finish-install/keep-consoles boolean true
324
325 # Avoid that last message about the install being complete.
326 d-i finish-install/reboot_in_progress note
327
328 # This will prevent the installer from ejecting the CD during the reboot,
329 # which is useful in some situations.
330 #d-i cdrom-detect/eject boolean false
331
332 # This is how to make the installer shutdown when finished, but not
333 # reboot into the installed system.
334 #d-i debian-installer/exit/halt boolean true
335 # This will power off the machine instead of just halting it.
336 #d-i debian-installer/exit/poweroff boolean true
337
338 ### Preseeding other packages
339 # Depending on what software you choose to install, or if things go wrong
340 # during the installation process, it's possible that other questions may
341 # be asked. You can preseed those too, of course. To get a list of every
342 # possible question that could be asked during an install, do an
343 # installation, and then run these commands:
344 # debconf-get-selections --installer > file
345 # debconf-get-selections >> file
346
347
348 #### Advanced options
349 ### Running custom commands during the installation
350 # d-i preseeding is inherently not secure. Nothing in the installer checks
351 # for attempts at buffer overflows or other exploits of the values of a
352 # preconfiguration file like this one. Only use preconfiguration files from
353 # trusted locations! To drive that home, and because it's generally useful,
354 # here's a way to run any shell command you'd like inside the installer,
355 # automatically.
356
357 # This first command is run as early as possible, just after
358 # preseeding is read.
359 #d-i preseed/early_command string anna-install some-udeb
360 # This command is run immediately before the partitioner starts. It may be
361 # useful to apply dynamic partitioner preseeding that depends on the state
362 # of the disks (which may not be visible when preseed/early_command runs).
363 #d-i partman/early_command \
364 # string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
365 # This command is run just before the install finishes, but when there is
366 # still a usable /target directory. You can chroot to /target and use it
367 # directly, or use the apt-install and in-target commands to easily install
368 # packages and run commands in the target system.
369 #d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
370