--- /dev/null
+# -*- sh -*-
+# Copyright 2000, International Business Machines Corporation and others.
+# All Rights Reserved.
+#
+# This software has been released under the terms of the IBM Public
+# License. For details, see the LICENSE file in the top-level source
+# directory or online at http://www.openafs.org/dl/license10.html
+
+# Configuration information for AFS client.
+
+# The following options are maintained by debconf. To change them, run
+# dpkg-reconfigure openafs-client.
+#
+# AFS_CLIENT Whether to start the AFS client at boot
+# AFS_AFSDB Whether to use AFSDB DNS records to find VLDB servers
+# AFS_CRYPT Whether to enable fcrypt encryption
+# AFS_DYNROOT Whether to use a dynamic /afs directory
+# AFS_FAKESTAT Whether to fake stat data for mount points
+
+test -f /etc/openafs/afs.conf.client && . /etc/openafs/afs.conf.client
+
+# Set to "-verbose" for a lot of debugging information from afsd. Only useful
+# for debugging as it prints a LOT of information.
+VERBOSE=
+
+# AFS client configuration options.
+#
+# Here is a (mostly) complete list of flags that afsd accepts and that are
+# useful here:
+#
+# -blocks The number of blocks available in the workstation cache.
+# -files The target number of files in the workstation cache (Default:
+# 1000).
+# -rootvol The name of the root volume to use.
+# -stat The number of stat cache entries.
+# -hosts List of servers to check for volume location info FOR THE
+# HOME CELL.
+# -memcache Use an in-memory cache rather than disk.
+# -cachedir The base directory for the workstation cache.
+# -mountdir The directory on which the AFS is to be mounted.
+# -confdir The configuration directory.
+# -nosettime Don't keep checking the time to avoid drift (default).
+# -settime Keep checking the time to avoid drift.
+# -verbose Be chatty.
+# -debug Print out additional debugging info.
+# -daemons The number of background daemons to start (Default: 2).
+# -rmtsys Also fires up an afs remote sys call (e.g. pioctl, setpag)
+# support daemon
+# -chunksize 2^n is the chunksize to be used (Default: use a kernel
+# module default).
+# -dcache The number of data cache entries.
+# -prealloc Number of preallocated "small" memory blocks
+# -waitclose Make close calls always synchronous (slows them down, though)
+# -files_per_subdir Number of files per cache subdir (Default: 2048).
+#
+# Using the memory cache is not recommended. It's less stable than the disk
+# cache and doesn't improve performance as much as it might sound.
+#
+# The default behavior is to let afsd automatically choose an apporpriate set
+# of flags. This should produce reasonable behavior for most working sets
+# provided that one is using a modern AFS client (1.4.2 or later).
+#
+# You can override that default behavior by setting OPTIONS to a specific set
+# of flags.
+OPTIONS=AUTOMATIC
+
+# The default value for the client sysname (as returned by fs sysname) is
+# determined during the kernel module build and is taken from the architecture
+# and the major Linux kernel version. Accesses to directories named "@sys" in
+# AFS will be internally redirected to a directory by this name by the AFS
+# client, allowing a single path to resolve to different directories depending
+# on the client architecture.
+#
+# If you would like to override the client sysname, uncomment this line and
+# set the variable to a space-separated list of sysnames. The AFS client will
+# attempt to resolve @sys to each directory name in the order given.
+#AFS_SYSNAME=""
+
+# If you want to prefer particular servers for replicated volumes, you can
+# configure that by defining an afs_server_prefs function here and then
+# uncommenting the setting of AFS_POST_INIT below. For more information, see
+# fs help setserverprefs and fs getserverprefs (for the current values).
+
+#afs_server_prefs() {
+# fs setserverprefs <host> <rank>
+#}
+
+# If you want to always run some command after starting OpenAFS, you can put
+# it here. Note that you cannot run multiple commands, even combined with &&
+# or ; or similar shell meta-characters. If you want to run multiple
+# commands, define a shell function instead and put the name of the shell
+# function here.
+AFS_POST_INIT=
+
+# Uncomment this line if you defined an afs_server_prefs function. (If you
+# have other commands that you also want to run, you'll have to put them in
+# that function, as you can only run one function.)
+#AFS_POST_INIT=afs_server_prefs
+
+# If you want to always run some command before shutting down OpenAFS, you can
+# put it here. The same caveat applies about multiple commands.
+AFS_PRE_SHUTDOWN=
+
+# If you are having problems with AFS shutting down cleanly or the system not
+# rebooting because the partition the AFS cache was on could not be unmounted,
+# try installing lsof and uncommenting this. This will cause all processes
+# with open AFS files to be killed before unmounting AFS if the runlevel being
+# switched to is 0 or 6.
+#
+# Warning: This means service openafs-client stop will kill all processes
+# with files open in AFS rather than returning an error saying the file system
+# is busy. This is probably what you want when the whole system is shutting
+# down, but often *not* what you want when just stopping and restarting the
+# client. The code doesn't run unless the runlevel is 0 or 6, but still, be
+# sure that this is what you want before enabling it.
+#AFS_PRE_SHUTDOWN=kill_all_afs
HCoop / hcoop / debian / openafs.git / blobdiff