1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
9 "Project-Id-Version: PACKAGE VERSION\n"
10 "Report-Msgid-Bugs-To: pkg-exim4-maintainers@lists.alioth.debian.org\n"
11 "POT-Creation-Date: 2007-07-18 08:29+0200\n"
12 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
13 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
14 "Language-Team: LANGUAGE <LL@li.org>\n"
16 "Content-Type: text/plain; charset=CHARSET\n"
17 "Content-Transfer-Encoding: 8bit\n"
21 #: ../exim4-base.templates:1001
22 msgid "Remove undelivered messages in spool directory?"
27 #: ../exim4-base.templates:1001
29 "There are e-mail messages in the Exim spool directory /var/spool/exim4/"
30 "input/ which have not yet been delivered. Removing Exim will cause them to "
31 "remain undelivered until Exim is re-installed."
36 #: ../exim4-base.templates:1001
38 "If this option is not chosen, the spool directory is kept, allowing the "
39 "messages in the queue to be delivered at a later date after Exim is re-"
45 #: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001
46 #: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001
47 msgid "Reconfigure exim4-config instead of this package"
52 #: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001
53 #: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001
55 "Exim4 has its configuration factored out into a dedicated package, exim4-"
56 "config. To reconfigure Exim4, use 'dpkg-reconfigure exim4-config'."
61 #. Translators beware! the following six strings form a single
62 #. Choices menu. - Every one of these strings has to fit in a standard
63 #. 80 characters console, as the fancy screen setup takes up some space
64 #. try to keep below ~71 characters.
65 #. DO NOT USE commas (,) in Choices translations otherwise
66 #. this will break the choices shown to users
67 #: ../exim4-config.templates:1001
68 msgid "internet site; mail is sent and received directly using SMTP"
73 #. Translators beware! the following six strings form a single
74 #. Choices menu. - Every one of these strings has to fit in a standard
75 #. 80 characters console, as the fancy screen setup takes up some space
76 #. try to keep below ~71 characters.
77 #. DO NOT USE commas (,) in Choices translations otherwise
78 #. this will break the choices shown to users
79 #: ../exim4-config.templates:1001
80 msgid "mail sent by smarthost; received via SMTP or fetchmail"
85 #. Translators beware! the following six strings form a single
86 #. Choices menu. - Every one of these strings has to fit in a standard
87 #. 80 characters console, as the fancy screen setup takes up some space
88 #. try to keep below ~71 characters.
89 #. DO NOT USE commas (,) in Choices translations otherwise
90 #. this will break the choices shown to users
91 #: ../exim4-config.templates:1001
92 msgid "mail sent by smarthost; no local mail"
97 #. Translators beware! the following six strings form a single
98 #. Choices menu. - Every one of these strings has to fit in a standard
99 #. 80 characters console, as the fancy screen setup takes up some space
100 #. try to keep below ~71 characters.
101 #. DO NOT USE commas (,) in Choices translations otherwise
102 #. this will break the choices shown to users
103 #: ../exim4-config.templates:1001
104 msgid "local delivery only; not on a network"
109 #. Translators beware! the following six strings form a single
110 #. Choices menu. - Every one of these strings has to fit in a standard
111 #. 80 characters console, as the fancy screen setup takes up some space
112 #. try to keep below ~71 characters.
113 #. DO NOT USE commas (,) in Choices translations otherwise
114 #. this will break the choices shown to users
115 #: ../exim4-config.templates:1001
116 msgid "no configuration at this time"
121 #: ../exim4-config.templates:1002
122 msgid "General type of mail configuration:"
127 #: ../exim4-config.templates:1002
129 "Please select the mail server configuration type that best meets your needs."
134 #: ../exim4-config.templates:1002
136 "Systems with dynamic IP addresses, including dialup systems, should "
137 "generally be configured to send outgoing mail to another machine, called a "
138 "'smarthost' for delivery because many receiving systems on the Internet "
139 "block incoming mail from dynamic IP addresses as spam protection."
144 #: ../exim4-config.templates:1002
146 "A system with a dynamic IP address can receive its own mail, or local "
147 "delivery can be disabled entirely (except mail for root and postmaster)."
152 #: ../exim4-config.templates:2001
153 msgid "Really leave the mail system unconfigured?"
158 #: ../exim4-config.templates:2001
160 "Until the mail system is configured, it will be broken and cannot be used. "
161 "Configuration at a later time can be done either by hand or by running 'dpkg-"
162 "reconfigure exim4-config' as root."
167 #: ../exim4-config.templates:3001
168 msgid "System mail name:"
173 #: ../exim4-config.templates:3001
175 "The 'mail name' is the domain name used to 'qualify' mail addresses without "
181 #: ../exim4-config.templates:3001
183 "This name will also be used by other programs. It should be the single, "
184 "fully qualified domain name (FQDN)."
189 #: ../exim4-config.templates:3001
191 "Thus, if a mail address on the local host is foo@example.org, the correct "
192 "value for this option would be example.org."
197 #: ../exim4-config.templates:3001
199 "This name won't appear on From: lines of outgoing messages if rewriting is "
205 #: ../exim4-config.templates:4001
206 msgid "Other destinations for which mail is accepted:"
211 #: ../exim4-config.templates:4001
213 "Please enter a semicolon-separated list of recipient domains for which this "
214 "machine should consider itself the final destination. These domains are "
215 "commonly called 'local domains'. The local hostname (${fqdn}) and "
216 "'localhost' are always added to the list given here."
221 #: ../exim4-config.templates:4001
223 "By default all local domains will be treated identically. If both a.example "
224 "and b.example are local domains, acc@a.example and acc@b.example will be "
225 "delivered to the same final destination. If different domain names should be "
226 "treated differently, it is necessary to edit the config files afterwards."
231 #: ../exim4-config.templates:5001
232 msgid "Domains to relay mail for:"
237 #: ../exim4-config.templates:5001
239 "Please enter a semicolon-separated list of recipient domains for which this "
240 "system will relay mail, for example as a fallback MX or mail gateway. This "
241 "means that this system will accept mail for these domains from anywhere on "
242 "the Internet and deliver them according to local delivery rules."
247 #: ../exim4-config.templates:5001
248 msgid "Do not mention local domains here. Wildcards may be used."
253 #: ../exim4-config.templates:6001
254 msgid "Machines to relay mail for:"
259 #: ../exim4-config.templates:6001
261 "Please enter a semicolon-separated list of IP address ranges for which this "
262 "system will unconditionally relay mail, functioning as a smarthost."
267 #: ../exim4-config.templates:6001
269 "You should use the standard address/prefix format (e.g. 194.222.242.0/24 or "
270 "5f03:1200:836f::/48)."
275 #: ../exim4-config.templates:6001
277 "If this system should not be a smarthost for any other host, leave this list "
283 #: ../exim4-config.templates:7001
284 msgid "Visible domain name for local users:"
289 #: ../exim4-config.templates:7001
291 "The option to hide the local mail name in outgoing mail was enabled. It is "
292 "therefore necessary to specify the domain name this system should use for "
293 "the domain part of local users' sender addresses."
298 #: ../exim4-config.templates:8001
299 msgid "IP address or host name of the outgoing smarthost:"
304 #: ../exim4-config.templates:8001
306 "Please enter the IP address or the host name of a mail server that this "
307 "system should use as outgoing smarthost. If the smarthost only accepts your "
308 "mail on a port different from TCP/25, append two colons and the port number "
309 "(for example smarthost.example::587 or 192.168.254.254::2525). Colons in "
310 "IPv6 addresses need to be doubled."
315 #: ../exim4-config.templates:8001
317 "If the smarthost requires authentication, please refer to the Debian-"
318 "specific README files in /usr/share/doc/exim4-base for notes about setting "
319 "up SMTP authentication."
324 #: ../exim4-config.templates:9001
325 msgid "Root and postmaster mail recipient:"
330 #: ../exim4-config.templates:9001
332 "Mail for the 'postmaster', 'root', and other system accounts needs to be "
333 "redirected to the user account of the actual system administrator."
338 #: ../exim4-config.templates:9001
340 "If this value is left empty, such mail will be saved in /var/mail/mail, "
341 "which is not recommended."
346 #: ../exim4-config.templates:9001
348 "Note that postmaster's mail should be read on the system to which it is "
349 "directed, rather than being forwarded elsewhere, so (at least one of) the "
350 "users listed here should not redirect their mail off this machine. A 'real-' "
351 "prefix can be used to force local delivery."
356 #: ../exim4-config.templates:9001
357 msgid "Multiple user names need to be separated by spaces."
362 #: ../exim4-config.templates:10001
363 msgid "IP-addresses to listen on for incoming SMTP connections:"
368 #: ../exim4-config.templates:10001
370 "Please enter a semicolon-separated list of IP addresses. The Exim SMTP "
371 "listener daemon will listen on all IP addresses listed here."
376 #: ../exim4-config.templates:10001
378 "An empty value will cause Exim to listen for connections on all available "
379 "network interfaces."
384 #: ../exim4-config.templates:10001
386 "If this system only receives mail directly from local services (and not from "
387 "other hosts), it is suggested to prohibit external connections to the local "
388 "Exim daemon. Such services include e-mail programs (MUAs) which talk to "
389 "localhost only as well as fetchmail. External connections are impossible "
390 "when 127.0.0.1 is entered here, as this will disable listening on public "
391 "network interfaces."
396 #: ../exim4-config.templates:11001
397 msgid "Keep number of DNS-queries minimal (Dial-on-Demand)?"
402 #: ../exim4-config.templates:11001
404 "In normal mode of operation Exim does DNS lookups at startup, and when "
405 "receiving or delivering messages. This is for logging purposes and allows "
406 "keeping down the number of hard-coded values in the configuration."
411 #: ../exim4-config.templates:11001
413 "If this system does not have a DNS full service resolver available at all "
414 "times (for example if its Internet access is a dial-up line using dial-on-"
415 "demand), this might have unwanted consequences. For example, starting up "
416 "Exim or running the queue (even with no messages waiting) might trigger a "
417 "costly dial-up-event."
422 #: ../exim4-config.templates:11001
424 "This option should be selected if this system is using Dial-on-Demand. If it "
425 "has always-on Internet access, this option should be disabled."
430 #: ../exim4-config.templates:12001
431 msgid "Mail Server configuration"
436 #: ../exim4-config.templates:13001
437 msgid "Split configuration into small files?"
442 #: ../exim4-config.templates:13001
444 "The Debian exim4 packages can either use 'unsplit configuration', a single "
445 "monolithic file (/etc/exim4/exim4.conf.template) or 'split configuration', "
446 "where the actual Exim configuration files are built from about 50 smaller "
447 "files in /etc/exim4/conf.d/."
452 #: ../exim4-config.templates:13001
454 "Unsplit configuration is better suited for large modifications and is "
455 "generally more stable, whereas split configuration offers a comfortable way "
456 "to make smaller modifications but is more fragile and might break if "
457 "modified carelessly."
462 #: ../exim4-config.templates:13001
464 "A more detailed discussion of split and unsplit configuration can be found "
465 "in the Debian-specific README files in /usr/share/doc/exim4-base."
470 #: ../exim4-config.templates:14001
471 msgid "Hide local mail name in outgoing mail?"
476 #: ../exim4-config.templates:14001
478 "The headers of outgoing mail can be rewritten to make it appear to have been "
479 "generated on a different system. If this option is chosen, '${mailname}', "
480 "'localhost' and '${dc_other_hostnames}' in From, Reply-To, Sender and Return-"
481 "Path are rewritten."
486 #: ../exim4-config.templates:15001
487 msgid "mbox format in /var/mail/"
492 #: ../exim4-config.templates:15001
493 msgid "Maildir format in home directory"
498 #: ../exim4-config.templates:15002
499 msgid "Delivery method for local mail:"
504 #: ../exim4-config.templates:15002
506 "Exim is able to store locally delivered email in different formats. The most "
507 "commonly used ones are mbox and Maildir. mbox uses a single file for the "
508 "complete mail folder stored in /var/mail/. With Maildir format every single "
509 "message is stored in a separate file in ~/Maildir/."
514 #: ../exim4-config.templates:15002
516 "Please note that most mail tools in Debian expect the local delivery method "
517 "to be mbox in their default."