Imported Upstream version 0.63.0 upstream/0.63.0
authorClinton Ebadi <clinton@unknownlamer.org>
Wed, 30 Apr 2014 00:09:35 +0000 (20:09 -0400)
committerClinton Ebadi <clinton@unknownlamer.org>
Wed, 30 Apr 2014 00:09:35 +0000 (20:09 -0400)
295 files changed:
ChangeLog
INSTALL
INSTALL.html
Makefile.am
Makefile.in
README
README.authdebug.html.in
README.html
README.ldap
README_authlib.html.in
aclocal.m4
auth_enumerate.3
auth_enumerate.html
auth_generic.3
auth_generic.html
auth_getoption.3
auth_getoption.html
auth_getuserinfo.3
auth_getuserinfo.html
auth_login.3
auth_login.html
auth_passwd.3
auth_passwd.html
auth_sasl.3
auth_sasl.html
auth_sasl_ex.3 [new file with mode: 0644]
authdaemond.c
authldap.ldif [new file with mode: 0644]
authldap.schema
authldapescape.c [new file with mode: 0644]
authldaplib.c
authlib.3.in
authlib.html.in
authmigrate.in
authmksock.c
authoption.c
authpasswd.1
authpasswd.c
authpasswd.html
authpgsqllib.c
authpgsqlrc
authpipe.c
authsaslfrombase64.c
authsasllogin.c
authtest.1
authtest.html
bdbobj/Makefile.in
bdbobj/aclocal.m4
bdbobj/config.h.in
bdbobj/configure
bdbobj/configure.in
checkpassword.c
checkpasswordsha1.c
config.guess
config.sub
configure
configure.in
courier-authlib.lpspec
courier-authlib.lpspec.in
courier-authlib.spec
courier-authlib.spec.in
courier_auth_config.h
courier_auth_config.h.in
courierauth.h
courierauthsasl.h
cryptpassword.c
depcomp
gdbmobj/Makefile.in
gdbmobj/aclocal.m4
gdbmobj/config.h.in
gdbmobj/configure
gdbmobj/configure.in
gdbmobj/gdbmobj.h
install-sh [moved from libltdl/install-sh with 99% similarity]
libhmac/Makefile.in
libhmac/aclocal.m4
libhmac/config.h.in
libhmac/configure
libhmac/hmac.h
liblock/Makefile.in
liblock/aclocal.m4
liblock/config.h.in
liblock/configure
liblock/liblock.h
liblock/lockmail.1
liblock/lockmail.html
liblock/mail.h
liblog/Makefile.in
liblog/aclocal.m4
liblog/config.h.in
liblog/configure
liblog/courierlogger.1
liblog/courierlogger.html
libltdl/Makefile.am
libltdl/Makefile.in
libltdl/README
libltdl/acinclude.m4 [deleted file]
libltdl/aclocal.m4
libltdl/argz.c [new file with mode: 0644]
libltdl/argz_.h [new file with mode: 0644]
libltdl/config-h.in
libltdl/config/compile [new file with mode: 0755]
libltdl/config/config.guess [moved from libltdl/config.guess with 94% similarity]
libltdl/config/config.sub [moved from libltdl/config.sub with 94% similarity]
libltdl/config/depcomp [new file with mode: 0755]
libltdl/config/install-sh [new file with mode: 0755]
libltdl/config/ltmain.sh [new file with mode: 0755]
libltdl/config/missing [moved from libltdl/missing with 85% similarity]
libltdl/configure
libltdl/configure.ac
libltdl/libltdl/lt__alloc.h [new file with mode: 0644]
libltdl/libltdl/lt__dirent.h [new file with mode: 0644]
libltdl/libltdl/lt__glibc.h [new file with mode: 0644]
libltdl/libltdl/lt__private.h [new file with mode: 0644]
libltdl/libltdl/lt__strl.h [new file with mode: 0644]
libltdl/libltdl/lt_dlloader.h [new file with mode: 0644]
libltdl/libltdl/lt_error.h [new file with mode: 0644]
libltdl/libltdl/lt_system.h [new file with mode: 0644]
libltdl/libltdl/slist.h [new file with mode: 0644]
libltdl/loaders/dld_link.c [new file with mode: 0644]
libltdl/loaders/dlopen.c [new file with mode: 0644]
libltdl/loaders/dyld.c [new file with mode: 0644]
libltdl/loaders/load_add_on.c [new file with mode: 0644]
libltdl/loaders/loadlibrary.c [new file with mode: 0644]
libltdl/loaders/preopen.c [new file with mode: 0644]
libltdl/loaders/shl_load.c [new file with mode: 0644]
libltdl/lt__alloc.c [new file with mode: 0644]
libltdl/lt__dirent.c [new file with mode: 0644]
libltdl/lt__strl.c [new file with mode: 0644]
libltdl/lt_dlloader.c [new file with mode: 0644]
libltdl/lt_error.c [new file with mode: 0644]
libltdl/ltdl.c
libltdl/ltdl.h
libltdl/ltmain.sh [deleted file]
libltdl/m4/argz.m4 [new file with mode: 0644]
libltdl/m4/libtool.m4 [new file with mode: 0644]
libltdl/m4/ltdl.m4 [new file with mode: 0644]
libltdl/m4/ltoptions.m4 [new file with mode: 0644]
libltdl/m4/ltsugar.m4 [new file with mode: 0644]
libltdl/m4/ltversion.m4 [new file with mode: 0644]
libltdl/m4/lt~obsolete.m4 [new file with mode: 0644]
libltdl/slist.c [new file with mode: 0644]
ltmain.sh [changed mode: 0644->0755]
makedat/Makefile.in
makedat/aclocal.m4
makedat/config.h.in
makedat/configure
md5/Makefile.in
md5/aclocal.m4
md5/config.h.in
md5/configure
missing
numlib/Makefile.in
numlib/aclocal.m4
numlib/config.h.in
numlib/configure
random128/Makefile.in
random128/aclocal.m4
random128/config.h.in
random128/configure
random128/configure.in
rfc822/ChangeLog
rfc822/Makefile.am
rfc822/Makefile.in
rfc822/aclocal.m4
rfc822/config.h.in
rfc822/configure
rfc822/configure.in
rfc822/encodeautodetect.c
rfc822/imaprefs.c
rfc822/rfc2047.c
rfc822/rfc2047.h
rfc822/rfc2047u.c
rfc822/rfc822.3
rfc822/rfc822.c
rfc822/rfc822.h
rfc822/rfc822.html
rfc822/rfc822_getaddr.c
rfc822/rfc822_getaddrs.c
rfc822/rfc822hdr.c
rfc822/rfc822hdr.h
rfc822/testsuite.c
rfc822/testsuite.txt
sha1/Makefile.am
sha1/Makefile.in
sha1/aclocal.m4
sha1/config.h.in
sha1/configure
sha1/configure.in
sha1/sha1.c
sha1/sha1.h
sha1/sha1_hash.c
sha1/sha256.c
sha1/sha512.c [new file with mode: 0644]
sha1/sha512_hash.c [new file with mode: 0644]
sha1/testsuite.c
sha1/testsuite.txt
sysconftool
unicode/Makefile.am [new file with mode: 0644]
unicode/Makefile.in [new file with mode: 0644]
unicode/README [new file with mode: 0644]
unicode/aclocal.m4 [new file with mode: 0644]
unicode/big5.c [new file with mode: 0644]
unicode/big5.h [new file with mode: 0644]
unicode/big5.pl [new file with mode: 0755]
unicode/charsetlist.pl [new file with mode: 0644]
unicode/charsetlist.txt [new file with mode: 0644]
unicode/configure [new file with mode: 0755]
unicode/configure.in [new file with mode: 0644]
unicode/eastasianwidth.h [new file with mode: 0644]
unicode/eucjp.c [new file with mode: 0644]
unicode/gb2312.c [new file with mode: 0644]
unicode/gb2312.h [new file with mode: 0644]
unicode/gb2312.pl [new file with mode: 0755]
unicode/ibm437.c [new file with mode: 0644]
unicode/ibm775.c [new file with mode: 0644]
unicode/ibm850.c [new file with mode: 0644]
unicode/ibm852.c [new file with mode: 0644]
unicode/ibm855.c [new file with mode: 0644]
unicode/ibm857.c [new file with mode: 0644]
unicode/ibm860.c [new file with mode: 0644]
unicode/ibm861.c [new file with mode: 0644]
unicode/ibm862.c [new file with mode: 0644]
unicode/ibm863.c [new file with mode: 0644]
unicode/ibm864.c [new file with mode: 0644]
unicode/ibm864convert.c [new file with mode: 0644]
unicode/ibm865.c [new file with mode: 0644]
unicode/ibm866.c [new file with mode: 0644]
unicode/ibm869.c [new file with mode: 0644]
unicode/iso2022jp.c [new file with mode: 0644]
unicode/iso2022jp.h [new file with mode: 0644]
unicode/iso2022jp.pl [new file with mode: 0644]
unicode/iso8859.c [new file with mode: 0644]
unicode/iso88591.c [new file with mode: 0644]
unicode/iso885910.c [new file with mode: 0644]
unicode/iso885913.c [new file with mode: 0644]
unicode/iso885914.c [new file with mode: 0644]
unicode/iso885915.c [new file with mode: 0644]
unicode/iso88592.c [new file with mode: 0644]
unicode/iso88593.c [new file with mode: 0644]
unicode/iso88594.c [new file with mode: 0644]
unicode/iso88595.c [new file with mode: 0644]
unicode/iso88596.c [new file with mode: 0644]
unicode/iso88597.c [new file with mode: 0644]
unicode/iso88598.c [new file with mode: 0644]
unicode/iso88599.c [new file with mode: 0644]
unicode/iso8859_convert.c [new file with mode: 0644]
unicode/koi8r.c [new file with mode: 0644]
unicode/koi8u.c [new file with mode: 0644]
unicode/ksx1001.c [new file with mode: 0644]
unicode/ksx1001.h [new file with mode: 0644]
unicode/ksx1001.pl [new file with mode: 0644]
unicode/mkeastasianwidth.pl [new file with mode: 0644]
unicode/mkibm864.pl [new file with mode: 0644]
unicode/mkiso8859.pl [new file with mode: 0644]
unicode/mkkoi8r.pl [new file with mode: 0644]
unicode/mkkoi8u.pl [new file with mode: 0644]
unicode/mkultcase.pl [new file with mode: 0644]
unicode/shiftjis.c [new file with mode: 0644]
unicode/unicode.c [new file with mode: 0644]
unicode/unicode.h [new file with mode: 0644]
unicode/unicode2.c [new file with mode: 0644]
unicode/unicode_config.h.in [new file with mode: 0644]
unicode/unicode_ultcase.c [new file with mode: 0644]
unicode/unicode_ultcasetab.c [new file with mode: 0644]
unicode/unicode_wcwidth.c [new file with mode: 0644]
unicode/unicodefilter.pl [new file with mode: 0644]
unicode/unicodeinfo.c [new file with mode: 0644]
unicode/update.sh [new file with mode: 0644]
unicode/utf7.c [new file with mode: 0644]
unicode/utf7imap.c [new file with mode: 0755]
unicode/utf8.c [new file with mode: 0644]
unicode/utf8_chset.c [new file with mode: 0644]
unicode/windows1250.c [new file with mode: 0644]
unicode/windows1251.c [new file with mode: 0644]
unicode/windows1252.c [new file with mode: 0644]
unicode/windows1253.c [new file with mode: 0644]
unicode/windows1254.c [new file with mode: 0644]
unicode/windows1255.c [new file with mode: 0644]
unicode/windows1256.c [new file with mode: 0644]
unicode/windows1257.c [new file with mode: 0644]
unicode/windows1258.c [new file with mode: 0644]
unicode/windows874.c [new file with mode: 0644]
unicode/windows874u.c [new file with mode: 0644]
unicode/xtest.c [new file with mode: 0644]
userdb/Makefile.am
userdb/Makefile.in
userdb/aclocal.m4
userdb/configure
userdb/makeuserdb.8.in
userdb/makeuserdb.html.in
userdb/userdb.8.in
userdb/userdb.html.in
userdb/userdbpw.8.in
userdb/userdbpw.html.in

index 065fc3e..4f7c780 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,102 @@
+0.63.0
+
+2009-12-17  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * authldapescape.c: Factor out LDAP string escape function.
+
+       * authldap.schema: Various fixes
+
+       * authldap.ldif (olcObjectClasses): Create LDIF format schema from
+       authldap.schema
+
+2009-11-21  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * authoption.c (auth_getoptionenvint): For account options that
+       are parsed to an int, an option value that begins with t, T, y, or Y
+       is evaluated as 1, other alphabetic values as 0; so that 'true'
+       or 'yes' get evaluated as 1.
+
+0.62.4
+
+2009-06-13  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * Various compilation fixes for gcc 4.4 and libtool 2.2
+
+0.62.3
+
+2009-04-26  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * courier-authlib.spec.in (MAKEFLAGS): Explicit path to ./configtmp
+
+2009-03-15  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * README_authlib.sgml: Fixed documentation of authpipe AUTH command.
+
+2009-02-22  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * authmigrate.in (rc): Add /etc/courier-imap
+
+0.62.2
+
+2009-02-03  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * Makefile.am: Compatibility fix for bash 4
+
+0.62.1
+
+2008-12-25  Mr. Sam  <mrsam@courier-mta.com>
+
+       * cryptpassword.c: Fix compiler warnings
+
+       * checkpasswordsha1.c: Fix compiler warnings.
+
+       * authldaplib.c (auth_ldap_enumerate): Fix typo.
+
+0.62.0
+
+2008-12-17  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * authpgsqllib.c: Use PQescapeStringConn() instead of removing all
+       apostrophes from query parameters. This fixes a potential SQL injection
+       vulnerability if the Postgres database uses a non-Latin locale.
+
+2008-12-06  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * Added support for {SSHA}-encrypted passwords. Based on a patch
+       by Zou bin <zb@bisp.com>.
+
+       * Added support for {SHA512} hash function.
+
+0.61.1
+
+2008-11-30  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * authsasllogin.c (authsasl_login): Fix memory leak.
+
+       * authldaplib.c (read_env): Fix resource leak. authldap did not close
+       the authldaprc configuration file after reading it on startup.
+
+       * authldaplib.c (auth_ldap_do2): Fix used ptr after free(). When an
+       email map feature is enabled, and the map failed, the resulting
+       error message was formed from a buffer that was recently free()ed.
+
+       * authpipe.c (auth_pipe): Fix memory leak. If the fork() system call
+       failed (unlikely), a buffer wasn't getting released.
+
+2008-11-30  Sam Varshavchik  <mrsam@courier-mta.com>
+
+       * Fix spec file to invoke authmksock with a short pathname.
+
+2008-08-07  Mr. Sam  <mrsam@courier-mta.com>
+
+       * courier-authlib.spec.in: Add -C option to configure invocation.
+       Remove the authmigrate script, only needed when upgrading from
+       pre-2004 Courier, and the current packaging causes an error.
+
+2008-07-20  "Hanno Böck" <hanno@hboeck.de>
+
+       * authmigrate.in (rc): Use ${DESTDIR}, if set.
+
 0.61.0
 
 2008-07-13  Mr. Sam  <mrsam@courier-mta.com>
diff --git a/INSTALL b/INSTALL
index 79c1c62..4d771d1 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -313,13 +313,12 @@ Guidelines for using other package managers
        created, and, if so, make the necessary arrangements.
      * Ensure that all prerequisite development libraries are available.
      * Run the configure script, run make, then make install as usual.
-     * Copy the "sysconftool" and "authmigrate" scripts somewhere into the
-       installation tree. A good place would be %libexecdir%/courier-authlib.
-       This is the 'make install-migrate' and 'make install-upgrade'
-       commands. Don't run them at build time. Instead, arrange for the
-       package installation script to run the authmigrate script first, then
-       "sysconftool %sysconfdir%/authlib/*.dist", after the package is
-       installed OR UPGRADED.
+     * Copy the "sysconftool" script somewhere into the installation tree. A
+       good place would be %libexecdir%/courier-authlib. This is the 'make
+       install-upgrade' command. Don't run this at build time. Instead,
+       arrange for the package installation script to run the "sysconftool
+       %sysconfdir%/authlib/*.dist" after the package is installed OR
+       UPGRADED.
      * The "authdaemond", "authenumerate", and "authtest" commands can be
        renamed, to avoid name clashes.
      * Remove all static libraries from %libdir%/courier-authlib.
index 13343f5..85093cc 100644 (file)
@@ -8,7 +8,7 @@
 
   <title>INSTALL</title>
   <meta name="generator" content="Bluefish 1.0.7"/>
-  <!-- $Id: INSTALL.html,v 1.7 2007/05/12 00:24:49 mrsam Exp $ -->
+  <!-- $Id: INSTALL.html,v 1.8 2008/08/07 22:40:49 mrsam Exp $ -->
   <!-- Copyright 2004 Double Precision, Inc.  See COPYING for -->
   <!-- distribution information. -->
 </head>
@@ -456,15 +456,13 @@ make install-configure
     <code>make</code>, then <code>make install</code> as
     usual.</li>
 
-    <li>Copy the "<code>sysconftool</code>" and
-    "<code>authmigrate</code>" scripts somewhere into the
-    installation tree. A good place would be
+    <li>Copy the "<code>sysconftool</code>" script somewhere into
+    the installation tree. A good place would be
     <code>%libexecdir%/courier-authlib</code>. This is the
-    '<code>make install-migrate</code>' and '<code>make
-    install-upgrade</code>' commands. Don't run them at build time.
-    Instead, arrange for the package installation script to run the
-    <code>authmigrate</code> script first, then "<code>sysconftool
-    %sysconfdir%/authlib/*.dist</code>", after the package is
+    '<code>make install-upgrade</code>' command. Don't run this at
+    build time. Instead, arrange for the package installation
+    script to run the "<code>sysconftool
+    %sysconfdir%/authlib/*.dist</code>" after the package is
     installed <strong>OR UPGRADED</strong>.</li>
 
     <li>The "<code>authdaemond</code>",
index 4faed97..01ac10c 100644 (file)
@@ -1,11 +1,11 @@
-# $Id: Makefile.am,v 1.134 2008/07/12 19:40:55 mrsam Exp $
+# $Id: Makefile.am,v 1.146 2009/12/25 21:53:37 mrsam Exp $
 #
-# Copyright 1998 - 2008 Double Precision, Inc.  See COPYING for
+# Copyright 1998 - 2009 Double Precision, Inc.  See COPYING for
 # distribution information.
 
 AUTOMAKE_OPTIONS=dist-bzip2
 
-SUBDIRS=libltdl gdbmobj bdbobj md5 sha1 libhmac numlib makedat userdb rfc822 random128 liblock liblog
+SUBDIRS=libltdl gdbmobj bdbobj md5 sha1 libhmac numlib makedat userdb unicode rfc822 random128 liblock liblog
 
 INCLUDES = $(LTDLINCL)
 
@@ -52,6 +52,7 @@ libcourierauthcommon_la_SOURCES= \
        authsaslfrombase64.c authsasltobase64.c \
        authstaticlist.h \
        authsyschangepwd.c authsyscommon.c \
+       authldapescape.c \
        cramlib.c cramlib.h \
        checkpassword.c cryptpassword.c \
        checkpasswordmd5.c checkpasswordsha1.c
@@ -254,6 +255,7 @@ HTMLFILES=README.html NEWS.html INSTALL.html \
 
 EXTRA_DIST=$(HTMLFILES) sysconftool COPYING COPYING.GPL\
        authldap.schema \
+       authldap.ldif \
        authldaprc authmysqlrc authpgsqlrc README.ldap \
        README.authmysql.myownquery \
        README.authdebug.html.in \
@@ -263,7 +265,7 @@ EXTRA_DIST=$(HTMLFILES) sysconftool COPYING COPYING.GPL\
        authlib.html.in authlib.3.in \
        authpasswd.html authpasswd.1 \
        authtest.html authtest.1 \
-       auth_sasl.html auth_sasl.3 \
+       auth_sasl.html auth_sasl.3 auth_sasl_ex.3 \
        auth_generic.html auth_generic.3 \
        auth_login.html auth_login.3 \
        auth_passwd.html auth_passwd.3 \
@@ -342,7 +344,7 @@ man3=authlib.3 auth_generic.3 auth_login.3 auth_getuserinfo.3 \
        auth_enumerate.3 auth_passwd.3 auth_getoption.3 auth_sasl.3
 man1=authpasswd.1 authtest.1
 
-man_MANS=$(man1) $(man3)
+man_MANS=$(man1) $(man3) auth_sasl_ex.3
 
 BUILT1=authlib.html authldaprc.h authmysqlrc.h authpgsqlrc.h authpiperc.h \
        authdaemonrc.h packageversion.h \
@@ -403,7 +405,7 @@ install-exec-hook:
                                $(DESTDIR)$(sbindir)/userdbpw ; \
                $(INSTALL_SCRIPT) userdb-test-cram-md5.pl \
                                $(DESTDIR)$(sbindir)/userdb-test-cram-md5
-       for f in $(pkglib_LTLIBRARIES); do . $$f; rm -f $(DESTDIR)$(pkglibdir)/$$dlname.0 $(DESTDIR)$(pkglibdir)/$$dlname.0.0; ln -s $$dlname $(DESTDIR)$(pkglibdir)/$$dlname.0; done
+       for f in $(pkglib_LTLIBRARIES); do . ./$$f; rm -f $(DESTDIR)$(pkglibdir)/$$dlname.0 $(DESTDIR)$(pkglibdir)/$$dlname.0.0; ln -s $$dlname $(DESTDIR)$(pkglibdir)/$$dlname.0; done
 
 
 uninstall-hook: uninstall-authldaprc uninstall-authdaemonrc uninstall-authmysqlrc uninstall-authpgsqlrc
@@ -415,13 +417,13 @@ uninstall-hook: uninstall-authldaprc uninstall-authdaemonrc uninstall-authmysqlr
                                $(DESTDIR)$(sbindir)/userdb \
                                $(DESTDIR)$(sbindir)/userdbpw \
                                $(DESTDIR)$(sbindir)/userdb-test-cram-md5
-       for f in $(pkglib_LTLIBRARIES); do . $$f; rm -f $(DESTDIR)$(pkglibdir)/$$dlname.0; done
+       for f in $(pkglib_LTLIBRARIES); do . ./$$f; rm -f $(DESTDIR)$(pkglibdir)/$$dlname.0; done
 
 authlib.html: authlib.html.in
-       CONFIG_FILES=authlib.html CONFIG_HEADERS= $(SHELL) ./config.status
+       $(SHELL) ./config.status --file=authlib.html
 
 authlib.3: authlib.3.in
-       CONFIG_FILES=authlib.3 CONFIG_HEADERS= $(SHELL) ./config.status
+       $(SHELL) ./config.status --file=authlib.3
 
 if HAVE_SGML
 authpasswd.html: authpasswd.sgml docbook/sgml2html
@@ -441,6 +443,7 @@ authlib.html.in: authlib.sgml docbook/sgml2html
 
 authlib.3.in: authlib.sgml docbook/sgml2man
        docbook/sgml2man authlib.sgml authlib.3.in
+       mv authlib.3 authlib.3.in
 
 README_authlib.html.in: README_authlib.sgml docbook/sgml2html
        docbook/sgml2html README_authlib.sgml README_authlib.html.in
@@ -487,11 +490,20 @@ auth_sasl.html: auth_sasl.sgml docbook/sgml2html
 auth_sasl.3: auth_sasl.sgml docbook/sgml2man
        docbook/sgml2man auth_sasl.sgml auth_sasl.3
 
+auth_sasl_ex.3: auth_sasl.3
+       touch $@
 
 endif
 
+authldap.ldif: authldap.schema
+       echo 'dn: cn=courier,cn=schema,cn=config' >authldap.ldif.tmp
+       echo 'objectClass: olcSchemaConfig' >>authldap.ldif.tmp
+       echo 'cn: courier' >>authldap.ldif.tmp
+       sed '/^#/d;s/^attributetype/olcAttributeTypes:/;s/^objectclass/olcObjectClasses:/;s/^$$/#/' <$(srcdir)/authldap.schema | tr '\011' ' ' >>authldap.ldif.tmp
+       mv -f authldap.ldif.tmp authldap.ldif
+
 README_authlib.html: README_authlib.html.in config.status
-       CONFIG_FILES=README_authlib.html CONFIG_HEADERS= $(SHELL) ./config.status
+       $(SHELL) ./config.status --file=README_authlib.html
 
 authdaemond.o: authdaemonrc.h authdaemond.c
 
@@ -508,15 +520,15 @@ install-configure:
 # For maintainer's use only
 
 distrelease:
-       umask 022; $(MAKE) -$(MAKEFLAGS) distcheck
-       $(MAKE) -$(MAKEFLAGS) rpm
+       umask 022; $(MAKE) distcheck
+       $(MAKE) rpm
        socksify cvs commit
        socksify cvs tag -F @PACKAGE@-latest
-       $(MAKE) -$(MAKEFLAGS)
-       $(MAKE) -$(MAKEFLAGS)
+       $(MAKE)
+       $(MAKE)
        rm -f @PACKAGE@.spec @PACKAGE@.lpspec
-       $(MAKE) -$(MAKEFLAGS) @PACKAGE@.spec @PACKAGE@.lpspec
-       $(MAKE) -$(MAKEFLAGS) dist
+       $(MAKE) @PACKAGE@.spec @PACKAGE@.lpspec
+       $(MAKE) dist
 
 tagrelease:
        socksify cvs tag -F -r @PACKAGE@-latest \
@@ -525,16 +537,16 @@ tagrelease:
 rpm: rpm-build
 
 rpm-build:
-       $(MAKE) -$(MAKEFLAGS) bump.rpm.release
-       $(MAKE) -$(MAKEFLAGS) dist
-       $(MAKE) -$(MAKEFLAGS) dorpm
+       $(MAKE) bump.rpm.release
+       $(MAKE) dist
+       $(MAKE) dorpm
 
 lpm: lpm-build
 
 lpm-build:
-       $(MAKE) -$(MAKEFLAGS) bump.rpm.release
-       $(MAKE) -$(MAKEFLAGS) dist
-       $(MAKE) -$(MAKEFLAGS) dolpm
+       $(MAKE) bump.rpm.release
+       $(MAKE) dist
+       $(MAKE) dolpm
 
 dolpm:
        rm -rf lpm
@@ -544,10 +556,10 @@ dolpm:
 publish: publish-@REPOSITORY@
 
 publish-dev:
-       $(MAKE) -$(MAKEFLAGS) dopublish SUBDIR=dev
+       $(MAKE) dopublish SUBDIR=dev
 
 publish-prod:
-       $(MAKE) -$(MAKEFLAGS) dopublish SUBDIR=prod
+       $(MAKE) dopublish SUBDIR=prod
 
 dopublish:
        lpbuild --resign lpm/*
@@ -568,7 +580,17 @@ dorpm:
        rm -f rpm/SOURCES/*
        rm -f rpm/SPECS/*
        rm -f rpm/SRPMS/*
-       unset MAKEFLAGS ; test ! -f $$HOME/.bashrc || . $$HOME/.bashrc; rpmbuild -ta --clean @PACKAGE@-@VERSION@.tar.bz2
+       rpmbuild -ta --clean \
+               --define "_topdir `pwd`/rpm" \
+               --define '_rpmdir %{_topdir}/RPMS' \
+               --define '_srcrpmdir %{_topdir}/SRPMS' \
+               --define '_sourcedir %{_topdir}/SOURCES' \
+               --define '_specdir %{_topdir}/SPECS' \
+               --define '_builddir %{_topdir}/BUILD' \
+               --define '_build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm' \
+               --define '_tmppath %{_var}/tmp' \
+               --define '__spec_prep_pre %{___build_pre}' \
+               @PACKAGE@-@VERSION@.tar.bz2
 
 bump.rpm.release: @PACKAGE@.spec @PACKAGE@.lpspec
        test -f $(srcdir)/rpm.release && . $(srcdir)/rpm.release; \
@@ -588,14 +610,14 @@ upload-beta:
        test -z "$(SFPASSWD)" && exit 1; exit 0
        rm -f @PACKAGE@-@VERSION@.tar.bz2.sig; gpg --detach-sign --default-key mrsam@courier-mta.com @PACKAGE@-@VERSION@.tar.bz2; test -f @PACKAGE@-@VERSION@.tar.bz2.sig || exit 1
        socksify ssh grace.speakeasy.net echo @PACKAGE@-@VERSION@.tar.bz2 `ls -l @PACKAGE@-@VERSION@.tar.bz2 | awk ' { print $$5 } '` \>courier-mta.org/@PACKAGE@.beta
-       rsync -aP --progress @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig frs.sourceforge.net:uploads/
-       ../sftools/release.pl mrsam $(SFPASSWD) courier authlib-devel `echo @VERSION@|sed 's/.*\(........\)/\1/'` "" "" @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig
+       ../sftools/release.pl mrsam $(SFPASSWD) courier authlib-devel `echo @VERSION@|sed 's/.*\(........\)/\1/'` @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig
 
 upload-dist:
        rm -f @PACKAGE@-@VERSION@.tar.bz2.sig; gpg --detach-sign --default-key mrsam@courier-mta.com @PACKAGE@-@VERSION@.tar.bz2; test -f @PACKAGE@-@VERSION@.tar.bz2.sig || exit 1
        socksify cvs tag -F -r @PACKAGE@-latest \
                `echo @PACKAGE@-@VERSION@ | tr '.' '-'`
-       rsync -aP --progress @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig frs.sourceforge.net:uploads/
+       socksify ../sftools/release.pl mrsam $(SFPASSWD) courier authlib @VERSION@ @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig
+       socksify ssh grace.speakeasy.net rm -f courier-mta.org/@PACKAGE@.beta
 
 release-dist:
        test -z "$(SFPASSWD)" && exit 1; exit 0
@@ -609,4 +631,4 @@ HTMLDOCFILES=$(HTMLFILES) README.authdebug.html README_authlib.html \
        $(man3:%.3=%.html) $(man1:%.1=%.html)
 
 htmldoc: $(HTMLDOCFILES)
-       for f in $^; do d=`basename $$f`; test "$$d" = "README.html" && d="index2.html"; xsltproc --nonet $$HOME/www/www.courier-mta.org/xsl/authlib.xsl $$f | perl -ne 's~\$(id):.*\$$~\$(id):'"$$h"'\$$~; print' >html/$$d; done
+       for f in $^; do d=`basename $$f`; test "$$d" = "README.html" && d="index2.html"; tidy -i -q --tidy-mark no --doctype transitional --input-encoding utf8 --output-encoding utf8 -asxml <$$f >$$f.tmp ; xsltproc --nonet $$HOME/www/www.courier-mta.org/xsl/authlib.xsl $$f.tmp | perl -ne 's~\$(id):.*\$$~\$(id):'"$$h"'\$$~; print' >html/$$d; rm -f $$f.tmp; done
index 73026e5..e5abbc9 100644 (file)
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,9 +15,9 @@
 
 @SET_MAKE@
 
-# $Id: Makefile.am,v 1.134 2008/07/12 19:40:55 mrsam Exp $
+# $Id: Makefile.am,v 1.146 2009/12/25 21:53:37 mrsam Exp $
 #
-# Copyright 1998 - 2008 Double Precision, Inc.  See COPYING for
+# Copyright 1998 - 2009 Double Precision, Inc.  See COPYING for
 # distribution information.
 
 
@@ -25,8 +26,8 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -71,17 +72,32 @@ CONFIG_CLEAN_FILES = authdaemond authdaemonrc authsystem.passwd \
        README.authdebug.html dbobj.config dbobj.h authmigrate \
        courier-authlib.spec courier-authlib.lpspec \
        courier-authlib.sysvinit userdb-test-cram-md5.pl
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(pkglibdir)" "$(DESTDIR)$(bindir)" \
        "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(pkglibexecdir)" \
        "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" \
        "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(includedir)"
-pkglibLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(pkglib_LTLIBRARIES)
 am_libauthcustom_la_OBJECTS = authcustom.lo preauthcustom.lo
 libauthcustom_la_OBJECTS = $(am_libauthcustom_la_OBJECTS)
@@ -145,8 +161,8 @@ libcourierauth_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
        $(libcourierauth_la_LDFLAGS) $(LDFLAGS) -o $@
 am_libcourierauthcommon_la_OBJECTS = authpwdenumerate.lo \
        authsaslfrombase64.lo authsasltobase64.lo authsyschangepwd.lo \
-       authsyscommon.lo cramlib.lo checkpassword.lo cryptpassword.lo \
-       checkpasswordmd5.lo checkpasswordsha1.lo
+       authsyscommon.lo authldapescape.lo cramlib.lo checkpassword.lo \
+       cryptpassword.lo checkpasswordmd5.lo checkpasswordsha1.lo
 libcourierauthcommon_la_OBJECTS =  \
        $(am_libcourierauthcommon_la_OBJECTS)
 libcourierauthcommon_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
@@ -172,8 +188,6 @@ libcourierauthsaslclient_la_LINK = $(LIBTOOL) --tag=CC \
        $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
        $(AM_CFLAGS) $(CFLAGS) $(libcourierauthsaslclient_la_LDFLAGS) \
        $(LDFLAGS) -o $@
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) $(sbin_PROGRAMS)
 am_authdaemondprog_OBJECTS = authdaemond.$(OBJEXT)
 authdaemondprog_OBJECTS = $(am_authdaemondprog_OBJECTS)
@@ -202,12 +216,11 @@ authtest_OBJECTS = $(am_authtest_OBJECTS)
 am_courierauthconfig_OBJECTS = authinfo.$(OBJEXT)
 courierauthconfig_OBJECTS = $(am_courierauthconfig_OBJECTS)
 courierauthconfig_LDADD = $(LDADD)
-pkglibexecSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-sbinSCRIPT_INSTALL = $(INSTALL_SCRIPT)
 SCRIPTS = $(pkglibexec_SCRIPTS) $(sbin_SCRIPTS)
 DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -253,10 +266,12 @@ man3dir = $(mandir)/man3
 NROFF = nroff
 MANS = $(man_MANS)
 DATA = $(noinst_DATA)
-includeHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(include_HEADERS)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+       $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+       distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -264,16 +279,43 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
 distcleancheck_listfiles = find . -type f -print
+pkglibexecdir = $(libexecdir)/courier-authlib
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AR = @AR@
+ARGZ_H = @ARGZ_H@
 AUTHPAMCRYPT = @AUTHPAMCRYPT@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -286,30 +328,32 @@ COURIERCONFIG = @COURIERCONFIG@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CRYPTLIBS = @CRYPTLIBS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
-ECHO = @ECHO@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXPECT = @EXPECT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GREP = @GREP@
+INCLTDL = @INCLTDL@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDAPLIBS = @LDAPLIBS@
 LDFLAGS = @LDFLAGS@
+LIBADD_DL = @LIBADD_DL@
+LIBADD_DLD_LINK = @LIBADD_DLD_LINK@
+LIBADD_DLOPEN = @LIBADD_DLOPEN@
+LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@
 LIBAUTHCUSTOM = @LIBAUTHCUSTOM@
 LIBAUTHLDAP = @LIBAUTHLDAP@
 LIBAUTHMYSQL = @LIBAUTHMYSQL@
@@ -327,15 +371,26 @@ LIBM = @LIBM@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
+LTDLDEPS = @LTDLDEPS@
 LTDLINCL = @LTDLINCL@
+LTDLOPEN = @LTDLOPEN@
 LTLIBOBJS = @LTLIBOBJS@
+LT_CONFIG_H = @LT_CONFIG_H@
+LT_DLLOADERS = @LT_DLLOADERS@
+LT_DLPREOPEN = @LT_DLPREOPEN@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 MYSQL_CONFIG = @MYSQL_CONFIG@
 MYSQL_LIBS = @MYSQL_LIBS@
 NETLIBS = @NETLIBS@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -364,8 +419,7 @@ abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -403,6 +457,9 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+ltdl_LIBOBJS = @ltdl_LIBOBJS@
+ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@
 mailgroup = @mailgroup@
 mailuser = @mailuser@
 mandir = @mandir@
@@ -416,20 +473,21 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 subdirs = @subdirs@
+sys_symbol_underscore = @sys_symbol_underscore@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 userdb = @userdb@
 AUTOMAKE_OPTIONS = dist-bzip2
-SUBDIRS = libltdl gdbmobj bdbobj md5 sha1 libhmac numlib makedat userdb rfc822 random128 liblock liblog
+SUBDIRS = libltdl gdbmobj bdbobj md5 sha1 libhmac numlib makedat userdb unicode rfc822 random128 liblock liblog
 INCLUDES = $(LTDLINCL)
 modules = @LIBAUTHUSERDB@ \
        @LIBAUTHPAM@ @LIBAUTHPWD@ @LIBAUTHSHADOW@ \
        @LIBAUTHPGSQL@ @LIBAUTHLDAP@ @LIBAUTHMYSQL@ \
        @LIBAUTHCUSTOM@ @LIBAUTHPIPE@
 
-pkglibexecdir = $(libexecdir)/courier-authlib
 pkglibexec_SCRIPTS = authsystem.passwd
 pkglib_LTLIBRARIES = libcourierauth.la \
        libcourierauthsasl.la libcourierauthsaslclient.la \
@@ -462,6 +520,7 @@ libcourierauthcommon_la_SOURCES = \
        authsaslfrombase64.c authsasltobase64.c \
        authstaticlist.h \
        authsyschangepwd.c authsyscommon.c \
+       authldapescape.c \
        cramlib.c cramlib.h \
        checkpassword.c cryptpassword.c \
        checkpasswordmd5.c checkpasswordsha1.c
@@ -545,6 +604,7 @@ HTMLFILES = README.html NEWS.html INSTALL.html \
 
 EXTRA_DIST = $(HTMLFILES) sysconftool COPYING COPYING.GPL\
        authldap.schema \
+       authldap.ldif \
        authldaprc authmysqlrc authpgsqlrc README.ldap \
        README.authmysql.myownquery \
        README.authdebug.html.in \
@@ -554,7 +614,7 @@ EXTRA_DIST = $(HTMLFILES) sysconftool COPYING COPYING.GPL\
        authlib.html.in authlib.3.in \
        authpasswd.html authpasswd.1 \
        authtest.html authtest.1 \
-       auth_sasl.html auth_sasl.3 \
+       auth_sasl.html auth_sasl.3 auth_sasl_ex.3 \
        auth_generic.html auth_generic.3 \
        auth_login.html auth_login.3 \
        auth_passwd.html auth_passwd.3 \
@@ -622,7 +682,7 @@ man3 = authlib.3 auth_generic.3 auth_login.3 auth_getuserinfo.3 \
        auth_enumerate.3 auth_passwd.3 auth_getoption.3 auth_sasl.3
 
 man1 = authpasswd.1 authtest.1
-man_MANS = $(man1) $(man3)
+man_MANS = $(man1) $(man3) auth_sasl_ex.3
 BUILT1 = authlib.html authldaprc.h authmysqlrc.h authpgsqlrc.h authpiperc.h \
        authdaemonrc.h packageversion.h \
        authchangepwdir.h sbindir.h \
@@ -645,15 +705,15 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
-             echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
-             cd $(srcdir) && $(AUTOMAKE) --gnu  \
+             echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+             $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
                && exit 0; \
              exit 1;; \
          esac; \
        done; \
-       echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
-       cd $(top_srcdir) && \
-         $(AUTOMAKE) --gnu  Makefile
+       echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+       $(am__cd) $(top_srcdir) && \
+         $(AUTOMAKE) --gnu Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
@@ -669,9 +729,10 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
        $(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure:  $(am__configure_deps)
-       cd $(srcdir) && $(AUTOCONF)
+       $(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-       cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+       $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 
 courier_auth_config.h: stamp-h1
        @if test ! -f $@; then \
@@ -683,7 +744,7 @@ stamp-h1: $(srcdir)/courier_auth_config.h.in $(top_builddir)/config.status
        @rm -f stamp-h1
        cd $(top_builddir) && $(SHELL) ./config.status courier_auth_config.h
 $(srcdir)/courier_auth_config.h.in:  $(am__configure_deps) 
-       cd $(top_srcdir) && $(AUTOHEADER)
+       ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
        rm -f stamp-h1
        touch $@
 
@@ -714,20 +775,24 @@ userdb-test-cram-md5.pl: $(top_builddir)/config.status $(srcdir)/userdb-test-cra
 install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES)
        @$(NORMAL_INSTALL)
        test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)"
-       @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
+       @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \
+       list2=; for p in $$list; do \
          if test -f $$p; then \
-           f=$(am__strip_dir) \
-           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
-           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(pkglibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
+           list2="$$list2 $$p"; \
          else :; fi; \
-       done
+       done; \
+       test -z "$$list2" || { \
+         echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \
+         $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \
+       }
 
 uninstall-pkglibLTLIBRARIES:
        @$(NORMAL_UNINSTALL)
-       @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \
-         p=$(am__strip_dir) \
-         echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$p'"; \
-         $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$p"; \
+       @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \
+       for p in $$list; do \
+         $(am__strip_dir) \
+         echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \
+         $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \
        done
 
 clean-pkglibLTLIBRARIES:
@@ -767,66 +832,98 @@ libcourierauthsaslclient.la: $(libcourierauthsaslclient_la_OBJECTS) $(libcourier
 install-binPROGRAMS: $(bin_PROGRAMS)
        @$(NORMAL_INSTALL)
        test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-       @list='$(bin_PROGRAMS)'; for p in $$list; do \
-         p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         if test -f $$p \
-            || test -f $$p1 \
-         ; then \
-           f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-          echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-          $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-         else :; fi; \
-       done
+       @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+       for p in $$list; do echo "$$p $$p"; done | \
+       sed 's/$(EXEEXT)$$//' | \
+       while read p p1; do if test -f $$p || test -f $$p1; \
+         then echo "$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+           -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+       sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) files[d] = files[d] " " $$1; \
+           else { print "f", $$3 "/" $$4, $$1; } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+           if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+           test -z "$$files" || { \
+           echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+           $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+           } \
+       ; done
 
 uninstall-binPROGRAMS:
        @$(NORMAL_UNINSTALL)
-       @list='$(bin_PROGRAMS)'; for p in $$list; do \
-         f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-         echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-         rm -f "$(DESTDIR)$(bindir)/$$f"; \
-       done
+       @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+       files=`for p in $$list; do echo "$$p"; done | \
+         sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+             -e 's/$$/$(EXEEXT)/' `; \
+       test -n "$$list" || exit 0; \
+       echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+       cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
-       @list='$(bin_PROGRAMS)'; for p in $$list; do \
-         f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         echo " rm -f $$p $$f"; \
-         rm -f $$p $$f ; \
-       done
+       @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+       echo " rm -f" $$list; \
+       rm -f $$list || exit $$?; \
+       test -n "$(EXEEXT)" || exit 0; \
+       list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+       echo " rm -f" $$list; \
+       rm -f $$list
 
 clean-noinstPROGRAMS:
-       @list='$(noinst_PROGRAMS)'; for p in $$list; do \
-         f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         echo " rm -f $$p $$f"; \
-         rm -f $$p $$f ; \
-       done
+       @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+       echo " rm -f" $$list; \
+       rm -f $$list || exit $$?; \
+       test -n "$(EXEEXT)" || exit 0; \
+       list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+       echo " rm -f" $$list; \
+       rm -f $$list
 install-sbinPROGRAMS: $(sbin_PROGRAMS)
        @$(NORMAL_INSTALL)
        test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
-       @list='$(sbin_PROGRAMS)'; for p in $$list; do \
-         p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         if test -f $$p \
-            || test -f $$p1 \
-         ; then \
-           f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-          echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
-          $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
-         else :; fi; \
-       done
+       @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+       for p in $$list; do echo "$$p $$p"; done | \
+       sed 's/$(EXEEXT)$$//' | \
+       while read p p1; do if test -f $$p || test -f $$p1; \
+         then echo "$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+           -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+       sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) files[d] = files[d] " " $$1; \
+           else { print "f", $$3 "/" $$4, $$1; } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+           if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+           test -z "$$files" || { \
+           echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+           $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+           } \
+       ; done
 
 uninstall-sbinPROGRAMS:
        @$(NORMAL_UNINSTALL)
-       @list='$(sbin_PROGRAMS)'; for p in $$list; do \
-         f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-         echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
-         rm -f "$(DESTDIR)$(sbindir)/$$f"; \
-       done
+       @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+       files=`for p in $$list; do echo "$$p"; done | \
+         sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+             -e 's/$$/$(EXEEXT)/' `; \
+       test -n "$$list" || exit 0; \
+       echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+       cd "$(DESTDIR)$(sbindir)" && rm -f $$files
 
 clean-sbinPROGRAMS:
-       @list='$(sbin_PROGRAMS)'; for p in $$list; do \
-         f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-         echo " rm -f $$p $$f"; \
-         rm -f $$p $$f ; \
-       done
+       @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+       echo " rm -f" $$list; \
+       rm -f $$list || exit $$?; \
+       test -n "$(EXEEXT)" || exit 0; \
+       list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+       echo " rm -f" $$list; \
+       rm -f $$list
 authdaemondprog$(EXEEXT): $(authdaemondprog_OBJECTS) $(authdaemondprog_DEPENDENCIES) 
        @rm -f authdaemondprog$(EXEEXT)
        $(authdaemondprog_LINK) $(authdaemondprog_OBJECTS) $(authdaemondprog_LDADD) $(LIBS)
@@ -851,41 +948,71 @@ courierauthconfig$(EXEEXT): $(courierauthconfig_OBJECTS) $(courierauthconfig_DEP
 install-pkglibexecSCRIPTS: $(pkglibexec_SCRIPTS)
        @$(NORMAL_INSTALL)
        test -z "$(pkglibexecdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibexecdir)"
-       @list='$(pkglibexec_SCRIPTS)'; for p in $$list; do \
+       @list='$(pkglibexec_SCRIPTS)'; test -n "$(pkglibexecdir)" || list=; \
+       for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-         if test -f $$d$$p; then \
-           f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-           echo " $(pkglibexecSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(pkglibexecdir)/$$f'"; \
-           $(pkglibexecSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(pkglibexecdir)/$$f"; \
-         else :; fi; \
-       done
+         if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n' \
+           -e 'h;s|.*|.|' \
+           -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+             if (++n[d] == $(am__install_max)) { \
+               print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+           else { print "f", d "/" $$4, $$1 } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+            if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+            test -z "$$files" || { \
+              echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pkglibexecdir)$$dir'"; \
+              $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pkglibexecdir)$$dir" || exit $$?; \
+            } \
+       ; done
 
 uninstall-pkglibexecSCRIPTS:
        @$(NORMAL_UNINSTALL)
-       @list='$(pkglibexec_SCRIPTS)'; for p in $$list; do \
-         f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-         echo " rm -f '$(DESTDIR)$(pkglibexecdir)/$$f'"; \
-         rm -f "$(DESTDIR)$(pkglibexecdir)/$$f"; \
-       done
+       @list='$(pkglibexec_SCRIPTS)'; test -n "$(pkglibexecdir)" || exit 0; \
+       files=`for p in $$list; do echo "$$p"; done | \
+              sed -e 's,.*/,,;$(transform)'`; \
+       test -n "$$list" || exit 0; \
+       echo " ( cd '$(DESTDIR)$(pkglibexecdir)' && rm -f" $$files ")"; \
+       cd "$(DESTDIR)$(pkglibexecdir)" && rm -f $$files
 install-sbinSCRIPTS: $(sbin_SCRIPTS)
        @$(NORMAL_INSTALL)
        test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
-       @list='$(sbin_SCRIPTS)'; for p in $$list; do \
+       @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
+       for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-         if test -f $$d$$p; then \
-           f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-           echo " $(sbinSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
-           $(sbinSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(sbindir)/$$f"; \
-         else :; fi; \
-       done
+         if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n' \
+           -e 'h;s|.*|.|' \
+           -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+             if (++n[d] == $(am__install_max)) { \
+               print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+           else { print "f", d "/" $$4, $$1 } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+            if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+            test -z "$$files" || { \
+              echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+              $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+            } \
+       ; done
 
 uninstall-sbinSCRIPTS:
        @$(NORMAL_UNINSTALL)
-       @list='$(sbin_SCRIPTS)'; for p in $$list; do \
-         f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-         echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
-         rm -f "$(DESTDIR)$(sbindir)/$$f"; \
-       done
+       @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
+       files=`for p in $$list; do echo "$$p"; done | \
+              sed -e 's,.*/,,;$(transform)'`; \
+       test -n "$$list" || exit 0; \
+       echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+       cd "$(DESTDIR)$(sbindir)" && rm -f $$files
 
 mostlyclean-compile:
        -rm -f *.$(OBJEXT)
@@ -901,6 +1028,7 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/authenumerate.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/authinfo.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/authldap.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/authldapescape.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/authldaplib.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/authmksock.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/authmoduser2.Plo@am__quote@
@@ -954,21 +1082,21 @@ distclean-compile:
 
 .c.o:
 @am__fastdepCC_TRUE@   $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@   mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@  $(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@   $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@   mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@  $(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@   $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@   mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@  $(LTCOMPILE) -c -o $@ $<
@@ -980,114 +1108,103 @@ clean-libtool:
        -rm -rf .libs _libs
 
 distclean-libtool:
-       -rm -f libtool
-install-man1: $(man1_MANS) $(man_MANS)
+       -rm -f libtool config.lt
+install-man1: $(man_MANS)
        @$(NORMAL_INSTALL)
        test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
-       @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-       l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-       for i in $$l2; do \
-         case "$$i" in \
-           *.1*) list="$$list $$i" ;; \
-         esac; \
+       @list=''; test -n "$(man1dir)" || exit 0; \
+       { for i in $$list; do echo "$$i"; done; \
+       l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+         sed -n '/\.1[a-z]*$$/p'; \
+       } | while read p; do \
+         if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+         echo "$$d$$p"; echo "$$p"; \
+       done | \
+       sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+             -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+       sed 'N;N;s,\n, ,g' | { \
+       list=; while read file base inst; do \
+         if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+           echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+           $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+         fi; \
        done; \
-       for i in $$list; do \
-         if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-         else file=$$i; fi; \
-         ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-         case "$$ext" in \
-           1*) ;; \
-           *) ext='1' ;; \
-         esac; \
-         inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-         inst=`echo $$inst | sed -e 's/^.*\///'`; \
-         inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-         echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
-         $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
-       done
+       for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+       while read files; do \
+         test -z "$$files" || { \
+           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+           $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+       done; }
+
 uninstall-man1:
        @$(NORMAL_UNINSTALL)
-       @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-       l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-       for i in $$l2; do \
-         case "$$i" in \
-           *.1*) list="$$list $$i" ;; \
-         esac; \
-       done; \
-       for i in $$list; do \
-         ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-         case "$$ext" in \
-           1*) ;; \
-           *) ext='1' ;; \
-         esac; \
-         inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-         inst=`echo $$inst | sed -e 's/^.*\///'`; \
-         inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-         echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
-         rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
-       done
-install-man3: $(man3_MANS) $(man_MANS)
+       @list=''; test -n "$(man1dir)" || exit 0; \
+       files=`{ for i in $$list; do echo "$$i"; done; \
+       l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+         sed -n '/\.1[a-z]*$$/p'; \
+       } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+             -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+       test -z "$$files" || { \
+         echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+         cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+install-man3: $(man_MANS)
        @$(NORMAL_INSTALL)
        test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
-       @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
-       l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-       for i in $$l2; do \
-         case "$$i" in \
-           *.3*) list="$$list $$i" ;; \
-         esac; \
+       @list=''; test -n "$(man3dir)" || exit 0; \
+       { for i in $$list; do echo "$$i"; done; \
+       l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+         sed -n '/\.3[a-z]*$$/p'; \
+       } | while read p; do \
+         if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+         echo "$$d$$p"; echo "$$p"; \
+       done | \
+       sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+             -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+       sed 'N;N;s,\n, ,g' | { \
+       list=; while read file base inst; do \
+         if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+           echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+           $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+         fi; \
        done; \
-       for i in $$list; do \
-         if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-         else file=$$i; fi; \
-         ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-         case "$$ext" in \
-           3*) ;; \
-           *) ext='3' ;; \
-         esac; \
-         inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-         inst=`echo $$inst | sed -e 's/^.*\///'`; \
-         inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-         echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
-         $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \
-       done
+       for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+       while read files; do \
+         test -z "$$files" || { \
+           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+           $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+       done; }
+
 uninstall-man3:
        @$(NORMAL_UNINSTALL)
-       @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
-       l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-       for i in $$l2; do \
-         case "$$i" in \
-           *.3*) list="$$list $$i" ;; \
-         esac; \
-       done; \
-       for i in $$list; do \
-         ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-         case "$$ext" in \
-           3*) ;; \
-           *) ext='3' ;; \
-         esac; \
-         inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-         inst=`echo $$inst | sed -e 's/^.*\///'`; \
-         inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-         echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \
-         rm -f "$(DESTDIR)$(man3dir)/$$inst"; \
-       done
+       @list=''; test -n "$(man3dir)" || exit 0; \
+       files=`{ for i in $$list; do echo "$$i"; done; \
+       l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+         sed -n '/\.3[a-z]*$$/p'; \
+       } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+             -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+       test -z "$$files" || { \
+         echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \
+         cd "$(DESTDIR)$(man3dir)" && rm -f $$files; }
 install-includeHEADERS: $(include_HEADERS)
        @$(NORMAL_INSTALL)
        test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
-       @list='$(include_HEADERS)'; for p in $$list; do \
+       @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+       for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-         f=$(am__strip_dir) \
-         echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
-         $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
+         echo "$$d$$p"; \
+       done | $(am__base_list) | \
+       while read files; do \
+         echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+         $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
        done
 
 uninstall-includeHEADERS:
        @$(NORMAL_UNINSTALL)
-       @list='$(include_HEADERS)'; for p in $$list; do \
-         f=$(am__strip_dir) \
-         echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
-         rm -f "$(DESTDIR)$(includedir)/$$f"; \
-       done
+       @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+       files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+       test -n "$$files" || exit 0; \
+       echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+       cd "$(DESTDIR)$(includedir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -1113,7 +1230,7 @@ $(RECURSIVE_TARGETS):
          else \
            local_target="$$target"; \
          fi; \
-         (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done; \
        if test "$$dot_seen" = "no"; then \
@@ -1147,16 +1264,16 @@ $(RECURSIVE_CLEAN_TARGETS):
          else \
            local_target="$$target"; \
          fi; \
-         (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done && test -z "$$fail"
 tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
-         test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+         test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done
 ctags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
-         test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+         test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
        done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -1164,14 +1281,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
-         $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES) courier_auth_config.h.in $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
-       tags=; \
+       set x; \
        here=`pwd`; \
        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
          include_option=--etags-include; \
@@ -1183,7 +1300,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) courier_auth_config.h.in $(TAGS_DEPEN
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test ! -f $$subdir/TAGS || \
-             tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+             set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS) courier_auth_config.h.in $(LISP) $(TAGS_FILES)'; \
@@ -1192,36 +1309,54 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) courier_auth_config.h.in $(TAGS_DEPEN
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
-       if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+       shift; \
+       if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
          test -n "$$unique" || unique=$$empty_fix; \
-         $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-           $$tags $$unique; \
+         if test $$# -gt 0; then \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             "$$@" $$unique; \
+         else \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             $$unique; \
+         fi; \
        fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) courier_auth_config.h.in $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
-       tags=; \
        list='$(SOURCES) $(HEADERS) courier_auth_config.h.in $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
-       test -z "$(CTAGS_ARGS)$$tags$$unique" \
+       test -z "$(CTAGS_ARGS)$$unique" \
          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-            $$tags $$unique
+            $$unique
 
 GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
-         && cd $(top_srcdir) \
-         && gtags -i $(GTAGS_ARGS) $$here
+         && $(am__cd) $(top_srcdir) \
+         && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
+       @list='$(MANS)'; if test -n "$$list"; then \
+         list=`for p in $$list; do \
+           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+           if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+         if test -n "$$list" && \
+           grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+           echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+           grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+           echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+           echo "       typically \`make maintainer-clean' will remove them" >&2; \
+           exit 1; \
+         else :; fi; \
+       else :; fi
        $(am__remove_distdir)
-       test -d $(distdir) || mkdir $(distdir)
+       test -d "$(distdir)" || mkdir "$(distdir)"
        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        list='$(DISTFILES)'; \
@@ -1237,29 +1372,44 @@ distdir: $(DISTFILES)
          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
          if test -d $$d/$$file; then \
            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+           if test -d "$(distdir)/$$file"; then \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+           fi; \
            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-             cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
            fi; \
-           cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
          else \
-           test -f $(distdir)/$$file \
-           || cp -p $$d/$$file $(distdir)/$$file \
+           test -f "$(distdir)/$$file" \
+           || cp -p $$d/$$file "$(distdir)/$$file" \
            || exit 1; \
          fi; \
        done
-       list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
            || $(MKDIR_P) "$(distdir)/$$subdir" \
            || exit 1; \
-           distdir=`$(am__cd) $(distdir) && pwd`; \
-           top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-           (cd $$subdir && \
+         fi; \
+       done
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+         if test "$$subdir" = .; then :; else \
+           dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+           $(am__relativize); \
+           new_distdir=$$reldir; \
+           dir1=$$subdir; dir2="$(top_distdir)"; \
+           $(am__relativize); \
+           new_top_distdir=$$reldir; \
+           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+           echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+           ($(am__cd) $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
-               top_distdir="$$top_distdir" \
-               distdir="$$distdir/$$subdir" \
+               top_distdir="$$new_top_distdir" \
+               distdir="$$new_distdir" \
                am__remove_distdir=: \
                am__skip_length_check=: \
+               am__skip_mode_fix=: \
                distdir) \
              || exit 1; \
          fi; \
@@ -1267,11 +1417,12 @@ distdir: $(DISTFILES)
        $(MAKE) $(AM_MAKEFLAGS) \
          top_distdir="$(top_distdir)" distdir="$(distdir)" \
          dist-hook
-       -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+       -test -n "$(am__skip_mode_fix)" \
+       || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-       || chmod -R a+r $(distdir)
+       || chmod -R a+r "$(distdir)"
 dist-gzip: distdir
        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)
@@ -1283,6 +1434,10 @@ dist-lzma: distdir
        tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
        $(am__remove_distdir)
 
+dist-xz: distdir
+       tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+       $(am__remove_distdir)
+
 dist-tarZ: distdir
        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
        $(am__remove_distdir)
@@ -1312,6 +1467,8 @@ distcheck: dist
          bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
        *.tar.lzma*) \
          unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+       *.tar.xz*) \
+         xz -dc $(distdir).tar.xz | $(am__untar) ;;\
        *.tar.Z*) \
          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
        *.shar.gz*) \
@@ -1323,9 +1480,11 @@ distcheck: dist
        mkdir $(distdir)/_build
        mkdir $(distdir)/_inst
        chmod a-w $(distdir)
+       test -d $(distdir)/_build || exit 0; \
        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-         && cd $(distdir)/_build \
+         && am__cwd=`pwd` \
+         && $(am__cd) $(distdir)/_build \
          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
            $(DISTCHECK_CONFIGURE_FLAGS) \
          && $(MAKE) $(AM_MAKEFLAGS) \
@@ -1347,13 +1506,15 @@ distcheck: dist
          && rm -rf "$$dc_destdir" \
          && $(MAKE) $(AM_MAKEFLAGS) dist \
          && rm -rf $(DIST_ARCHIVES) \
-         && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+         && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+         && cd "$$am__cwd" \
+         || exit 1
        $(am__remove_distdir)
        @(echo "$(distdir) archives ready for distribution: "; \
          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-       @cd $(distuninstallcheck_dir) \
+       @$(am__cd) '$(distuninstallcheck_dir)' \
        && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
           || { echo "ERROR: files left after uninstall:" ; \
                if test -n "$(DESTDIR)"; then \
@@ -1402,6 +1563,7 @@ clean-generic:
 
 distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
        -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
@@ -1427,6 +1589,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -1434,25 +1598,33 @@ info-am:
 install-data-am: install-includeHEADERS install-man
        @$(NORMAL_INSTALL)
        $(MAKE) $(AM_MAKEFLAGS) install-data-hook
-
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS install-pkglibLTLIBRARIES \
        install-pkglibexecSCRIPTS install-sbinPROGRAMS \
        install-sbinSCRIPTS
        @$(NORMAL_INSTALL)
        $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man: install-man1 install-man3
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -1481,19 +1653,19 @@ uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
        uninstall-sbinSCRIPTS
        @$(NORMAL_INSTALL)
        $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
-
 uninstall-man: uninstall-man1 uninstall-man3
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-       install-data-am install-exec-am install-strip uninstall-am
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
+       ctags-recursive install install-am install-data-am \
+       install-exec-am install-strip tags-recursive uninstall-am
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
        all all-am am--refresh check check-am clean clean-binPROGRAMS \
        clean-generic clean-libtool clean-noinstPROGRAMS \
        clean-pkglibLTLIBRARIES clean-sbinPROGRAMS ctags \
        ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
-       dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \
-       distclean-compile distclean-generic distclean-hdr \
+       dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+       distclean distclean-compile distclean-generic distclean-hdr \
        distclean-libtool distclean-tags distcleancheck distdir \
        distuninstallcheck dvi dvi-am html html-am info info-am \
        install install-am install-binPROGRAMS install-data \
@@ -1659,7 +1831,7 @@ install-exec-hook:
                                $(DESTDIR)$(sbindir)/userdbpw ; \
                $(INSTALL_SCRIPT) userdb-test-cram-md5.pl \
                                $(DESTDIR)$(sbindir)/userdb-test-cram-md5
-       for f in $(pkglib_LTLIBRARIES); do . $$f; rm -f $(DESTDIR)$(pkglibdir)/$$dlname.0 $(DESTDIR)$(pkglibdir)/$$dlname.0.0; ln -s $$dlname $(DESTDIR)$(pkglibdir)/$$dlname.0; done
+       for f in $(pkglib_LTLIBRARIES); do . ./$$f; rm -f $(DESTDIR)$(pkglibdir)/$$dlname.0 $(DESTDIR)$(pkglibdir)/$$dlname.0.0; ln -s $$dlname $(DESTDIR)$(pkglibdir)/$$dlname.0; done
 
 uninstall-hook: uninstall-authldaprc uninstall-authdaemonrc uninstall-authmysqlrc uninstall-authpgsqlrc
        rm -f $(DESTDIR)$(pkglibexecdir)/authdaemond
@@ -1670,13 +1842,13 @@ uninstall-hook: uninstall-authldaprc uninstall-authdaemonrc uninstall-authmysqlr
                                $(DESTDIR)$(sbindir)/userdb \
                                $(DESTDIR)$(sbindir)/userdbpw \
                                $(DESTDIR)$(sbindir)/userdb-test-cram-md5
-       for f in $(pkglib_LTLIBRARIES); do . $$f; rm -f $(DESTDIR)$(pkglibdir)/$$dlname.0; done
+       for f in $(pkglib_LTLIBRARIES); do . ./$$f; rm -f $(DESTDIR)$(pkglibdir)/$$dlname.0; done
 
 authlib.html: authlib.html.in
-       CONFIG_FILES=authlib.html CONFIG_HEADERS= $(SHELL) ./config.status
+       $(SHELL) ./config.status --file=authlib.html
 
 authlib.3: authlib.3.in
-       CONFIG_FILES=authlib.3 CONFIG_HEADERS= $(SHELL) ./config.status
+       $(SHELL) ./config.status --file=authlib.3
 
 @HAVE_SGML_TRUE@authpasswd.html: authpasswd.sgml docbook/sgml2html
 @HAVE_SGML_TRUE@       docbook/sgml2html authpasswd.sgml authpasswd.html
@@ -1695,6 +1867,7 @@ authlib.3: authlib.3.in
 
 @HAVE_SGML_TRUE@authlib.3.in: authlib.sgml docbook/sgml2man
 @HAVE_SGML_TRUE@       docbook/sgml2man authlib.sgml authlib.3.in
+@HAVE_SGML_TRUE@       mv authlib.3 authlib.3.in
 
 @HAVE_SGML_TRUE@README_authlib.html.in: README_authlib.sgml docbook/sgml2html
 @HAVE_SGML_TRUE@       docbook/sgml2html README_authlib.sgml README_authlib.html.in
@@ -1741,8 +1914,18 @@ authlib.3: authlib.3.in
 @HAVE_SGML_TRUE@auth_sasl.3: auth_sasl.sgml docbook/sgml2man
 @HAVE_SGML_TRUE@       docbook/sgml2man auth_sasl.sgml auth_sasl.3
 
+@HAVE_SGML_TRUE@auth_sasl_ex.3: auth_sasl.3
+@HAVE_SGML_TRUE@       touch $@
+
+authldap.ldif: authldap.schema
+       echo 'dn: cn=courier,cn=schema,cn=config' >authldap.ldif.tmp
+       echo 'objectClass: olcSchemaConfig' >>authldap.ldif.tmp
+       echo 'cn: courier' >>authldap.ldif.tmp
+       sed '/^#/d;s/^attributetype/olcAttributeTypes:/;s/^objectclass/olcObjectClasses:/;s/^$$/#/' <$(srcdir)/authldap.schema | tr '\011' ' ' >>authldap.ldif.tmp
+       mv -f authldap.ldif.tmp authldap.ldif
+
 README_authlib.html: README_authlib.html.in config.status
-       CONFIG_FILES=README_authlib.html CONFIG_HEADERS= $(SHELL) ./config.status
+       $(SHELL) ./config.status --file=README_authlib.html
 
 authdaemond.o: authdaemonrc.h authdaemond.c
 
@@ -1758,15 +1941,15 @@ install-configure:
 # For maintainer's use only
 
 distrelease:
-       umask 022; $(MAKE) -$(MAKEFLAGS) distcheck
-       $(MAKE) -$(MAKEFLAGS) rpm
+       umask 022; $(MAKE) distcheck
+       $(MAKE) rpm
        socksify cvs commit
        socksify cvs tag -F @PACKAGE@-latest
-       $(MAKE) -$(MAKEFLAGS)
-       $(MAKE) -$(MAKEFLAGS)
+       $(MAKE)
+       $(MAKE)
        rm -f @PACKAGE@.spec @PACKAGE@.lpspec
-       $(MAKE) -$(MAKEFLAGS) @PACKAGE@.spec @PACKAGE@.lpspec
-       $(MAKE) -$(MAKEFLAGS) dist
+       $(MAKE) @PACKAGE@.spec @PACKAGE@.lpspec
+       $(MAKE) dist
 
 tagrelease:
        socksify cvs tag -F -r @PACKAGE@-latest \
@@ -1775,16 +1958,16 @@ tagrelease:
 rpm: rpm-build
 
 rpm-build:
-       $(MAKE) -$(MAKEFLAGS) bump.rpm.release
-       $(MAKE) -$(MAKEFLAGS) dist
-       $(MAKE) -$(MAKEFLAGS) dorpm
+       $(MAKE) bump.rpm.release
+       $(MAKE) dist
+       $(MAKE) dorpm
 
 lpm: lpm-build
 
 lpm-build:
-       $(MAKE) -$(MAKEFLAGS) bump.rpm.release
-       $(MAKE) -$(MAKEFLAGS) dist
-       $(MAKE) -$(MAKEFLAGS) dolpm
+       $(MAKE) bump.rpm.release
+       $(MAKE) dist
+       $(MAKE) dolpm
 
 dolpm:
        rm -rf lpm
@@ -1794,10 +1977,10 @@ dolpm:
 publish: publish-@REPOSITORY@
 
 publish-dev:
-       $(MAKE) -$(MAKEFLAGS) dopublish SUBDIR=dev
+       $(MAKE) dopublish SUBDIR=dev
 
 publish-prod:
-       $(MAKE) -$(MAKEFLAGS) dopublish SUBDIR=prod
+       $(MAKE) dopublish SUBDIR=prod
 
 dopublish:
        lpbuild --resign lpm/*
@@ -1818,7 +2001,17 @@ dorpm:
        rm -f rpm/SOURCES/*
        rm -f rpm/SPECS/*
        rm -f rpm/SRPMS/*
-       unset MAKEFLAGS ; test ! -f $$HOME/.bashrc || . $$HOME/.bashrc; rpmbuild -ta --clean @PACKAGE@-@VERSION@.tar.bz2
+       rpmbuild -ta --clean \
+               --define "_topdir `pwd`/rpm" \
+               --define '_rpmdir %{_topdir}/RPMS' \
+               --define '_srcrpmdir %{_topdir}/SRPMS' \
+               --define '_sourcedir %{_topdir}/SOURCES' \
+               --define '_specdir %{_topdir}/SPECS' \
+               --define '_builddir %{_topdir}/BUILD' \
+               --define '_build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm' \
+               --define '_tmppath %{_var}/tmp' \
+               --define '__spec_prep_pre %{___build_pre}' \
+               @PACKAGE@-@VERSION@.tar.bz2
 
 bump.rpm.release: @PACKAGE@.spec @PACKAGE@.lpspec
        test -f $(srcdir)/rpm.release && . $(srcdir)/rpm.release; \
@@ -1838,14 +2031,14 @@ upload-beta:
        test -z "$(SFPASSWD)" && exit 1; exit 0
        rm -f @PACKAGE@-@VERSION@.tar.bz2.sig; gpg --detach-sign --default-key mrsam@courier-mta.com @PACKAGE@-@VERSION@.tar.bz2; test -f @PACKAGE@-@VERSION@.tar.bz2.sig || exit 1
        socksify ssh grace.speakeasy.net echo @PACKAGE@-@VERSION@.tar.bz2 `ls -l @PACKAGE@-@VERSION@.tar.bz2 | awk ' { print $$5 } '` \>courier-mta.org/@PACKAGE@.beta
-       rsync -aP --progress @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig frs.sourceforge.net:uploads/
-       ../sftools/release.pl mrsam $(SFPASSWD) courier authlib-devel `echo @VERSION@|sed 's/.*\(........\)/\1/'` "" "" @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig
+       ../sftools/release.pl mrsam $(SFPASSWD) courier authlib-devel `echo @VERSION@|sed 's/.*\(........\)/\1/'` @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig
 
 upload-dist:
        rm -f @PACKAGE@-@VERSION@.tar.bz2.sig; gpg --detach-sign --default-key mrsam@courier-mta.com @PACKAGE@-@VERSION@.tar.bz2; test -f @PACKAGE@-@VERSION@.tar.bz2.sig || exit 1
        socksify cvs tag -F -r @PACKAGE@-latest \
                `echo @PACKAGE@-@VERSION@ | tr '.' '-'`
-       rsync -aP --progress @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig frs.sourceforge.net:uploads/
+       socksify ../sftools/release.pl mrsam $(SFPASSWD) courier authlib @VERSION@ @PACKAGE@-@VERSION@.tar.bz2 @PACKAGE@-@VERSION@.tar.bz2.sig
+       socksify ssh grace.speakeasy.net rm -f courier-mta.org/@PACKAGE@.beta
 
 release-dist:
        test -z "$(SFPASSWD)" && exit 1; exit 0
@@ -1856,7 +2049,8 @@ release-dist:
        socksify ssh grace.speakeasy.net rm -f courier-mta.org/@PACKAGE@.beta
 
 htmldoc: $(HTMLDOCFILES)
-       for f in $^; do d=`basename $$f`; test "$$d" = "README.html" && d="index2.html"; xsltproc --nonet $$HOME/www/www.courier-mta.org/xsl/authlib.xsl $$f | perl -ne 's~\$(id):.*\$$~\$(id):'"$$h"'\$$~; print' >html/$$d; done
+       for f in $^; do d=`basename $$f`; test "$$d" = "README.html" && d="index2.html"; tidy -i -q --tidy-mark no --doctype transitional --input-encoding utf8 --output-encoding utf8 -asxml <$$f >$$f.tmp ; xsltproc --nonet $$HOME/www/www.courier-mta.org/xsl/authlib.xsl $$f.tmp | perl -ne 's~\$(id):.*\$$~\$(id):'"$$h"'\$$~; print' >html/$$d; rm -f $$f.tmp; done
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/README b/README
index 1afa2ed..22d23d1 100644 (file)
--- a/README
+++ b/README
@@ -58,5 +58,9 @@ Overview
 
 Further resources
 
-   Subscribe to the courier-users mailing list:
-   [5]http://lists.sourceforge.net/lists/listinfo/courier-users.
+   Subscribe to the [5]courier-users mailing list. Go to
+   http://lists.sourceforge.net/mailman/listinfo/courier-users to subscribe
+   to courier-users, or send a message to
+   <courier-users-request@lists.sourceforge.net> and put "subscribe" in the
+   subject line. Search the list archives at
+   [6]http://markmail.org/browse/net.sourceforge.lists.courier-users.
dissimilarity index 80%
index beac35a..cb31a5c 100644 (file)
-<html>
-<head>
-  <meta http-equiv="Content-Type" content="">
-  <title>Debugging authentication problems</title>
-</head>
-
-<body bgcolor="#FFFFFF">
-<h1 align="center">Debugging authentication problems</h1>
-
-<p>A common problem after installing the Courier authentication library is
-that authentication, using authtest, doesn't work. This document shows how to
-use courier's debugging features to pinpoint the problem.</p>
-
-<h2>1. Turn on debugging</h2>
-
-<p>For courier-imap, you need to set one of the following values in
-@sysconfdir@/authdaemonrc:</p>
-<pre>DEBUG_LOGIN=1    # turn on authentication debugging
-DEBUG_LOGIN=2    # turn on authentication debugging AND show passwords</pre>
-
-<p>This setting is located at the very end of the configuration file.</p>
-
-<p>After changing this setting, restart the authentication daemon by running
-the "authdaemond stop" and "authdaemond start" commands.</p>
-
-<p>At this point, all debugging output goes to syslog at level 'debug', which
-is normally not shown. You will probably need to change your
-<code>/etc/syslog.conf</code> file to be able to see these messages. If you
-have an existing entry which says "mail.info" (which means facility 'mail',
-level 'info' or higher) then you can just change this to "mail.debug".
-Alternatively you can add a new entry like this:</p>
-<pre>*.debug                        /var/log/debug</pre>
-
-<p>Don't forget to create this file, and to send a HUP signal to syslogd to
-make it re-read its configuration:</p>
-<pre># touch /var/log/debug
-# killall -1 syslogd</pre>
-
-<p>If you don't want to mess around with your syslog configuration, you can
-also start <code>authdaemond</code> manually, and log its output to a
-file:</p>
-
-<p><code>@libexecdir@/courier-authlib/authdaemond &gt;filename
-2&gt;&amp;1</code></p>
-
-<h2>2. Issue a manual login</h2>
-
-<p>You can use the authtest command to verify authentication, or go ahead and
-install Courier-IMAP.</p>
-
-<p>For courier-imap, you will get much better information by not using a mail
-client and manually logging in using 'telnet'. The transcript of this telnet
-session may give useful information as to what is going on. If you are going
-to report a problem to the mailing list, you should certainly include this
-transcript as well as the corresponding debugging output.</p>
-<pre>-- to debug POP3 --
-# telnet x.x.x.x 110
-user USERNAME
-pass PASSWORD
-stat
-quit
-
--- to debug IMAP --
-# telnet x.x.x.x 143
-a login USERNAME PASSWORD
-a examine inbox
-a logout
-
--- to debug POP3 over SSL --
-# openssl s_client -connect x.x.x.x:995
-(then use same commands as POP3 example)
-
--- to debug IMAP over SSL --
-# openssl s_client -connect x.x.x.x:993
-(then use same commands as IMAP example)</pre>
-
-<p>This isn't an option for sqwebmail of course - just login through the web
-interface and check the authentication debug log which is generated.</p>
-
-<h2>3. Interpret the debug output</h2>
-
-<p>First, a brief explanation of courier's authentication system. There are a
-number of standalone <b>authentication modules</b>. An authentication module
-exists for every authentication method. Each authentication module is
-installed as a shared library. When <strong>authdaemond</strong> starts, it
-attempts to load and initialize the authentication modules, logging the
-following messages to syslog:</p>
-<pre>Oct 17 11:25:37 commodore authdaemond: modules="authuserdb authpam authpgsql authldap authmysql authcustom", daemons=5
-Oct 17 11:25:37 commodore authdaemond: Installing libauthuserdb
-Oct 17 11:25:37 commodore authdaemond: Installation complete: authuserdb
-Oct 17 11:25:37 commodore authdaemond: Installing libauthpam
-Oct 17 11:25:37 commodore authdaemond: Installation complete: authpam
-Oct 17 11:25:37 commodore authdaemond: Installing libauthpgsql
-Oct 17 11:25:37 commodore authdaemond: libauthpgsql.so: cannot open shared object file: No such file or directory
-Oct 17 11:25:37 commodore authdaemond: Installing libauthldap
-Oct 17 11:25:37 commodore authdaemond: libauthldap.so: cannot open shared object file: No such file or directory
-Oct 17 11:25:37 commodore authdaemond: Installing libauthmysql
-Oct 17 11:25:37 commodore authdaemond: libauthmysql.so: cannot open shared object file: No such file or directory
-Oct 17 11:25:37 commodore authdaemond: Installing libauthcustom
-Oct 17 11:25:37 commodore authdaemond: Installation complete: authcustom</pre>
-
-<p>The first message lists all authentication modules that were compiled, and
-indicates that <strong>authdaemond</strong> will spawn five processes to
-handle all authentication requests. This is followed by messages indicating
-that indicate which authentication modules were installed.</p>
-
-<p>In this example, authdaemond did not load the authpgsql, authldap, and
-authmysql modules. That's because in this case the Courier authentication
-library is installed by the system's package manager. The LDAP, MySQL, and
-PostgreSQL support was placed into optional sub-packages which are not
-installed. Even though all of these modules were initially compiled, the
-optional authentication modules were not installed.</p>
-
-<p>This is normal. authdaemond will simply ignore any authentication module
-it cannot find, and will activate only those modules that are available. When
-an authentication request comes in, all of the modules will be executed, one
-after the other, resulting in one of three conditions:</p>
-<dl>
-  <dt>ACCEPT</dt>
-    <dd>The user was authenticated successfully</dd>
-  <dt>REJECT</dt>
-    <dd>The module did not know this username, or the user gave invalid
-      credentials. The request is passed to the next module.</dd>
-  <dt>TEMPFAIL</dt>
-    <dd>The module suffered an internal failure, such as inability to contact
-      an external database. The login is rejected, and no further modules are
-      tried.</dd>
-</dl>
-
-<p>In a typical Courier installation the authentication request is sent, via
-a filesystem socket, to a pool of <b>authdaemond</b> processes (note the
-extra "d" on the end) which perform the actual work. authdaemond, in turn,
-contains other authentication modules such as authpam, authmysql, and so
-on.</p>
-
-<p>If <code>authdaemond</code> is running successfully, then it will in turn
-run each of the modules it is linked against. If any one returns REJECT then
-the next is tried; if any returns TEMPFAIL or ACCEPT then no further modules
-are tried.</p>
-
-<p>So a typical example might look like this:</p>
-<pre>Apr 14 14:07:15 billdog authdaemond: received auth request, service=pop3, authtype=login
-Apr 14 14:07:15 billdog authdaemond: authcustom: trying this module
-Apr 14 14:07:15 billdog authdaemond: authcustom: nothing implemented in do_auth_custom()
-Apr 14 14:07:15 billdog authdaemond: authcustom: REJECT - try next module
-Apr 14 14:07:15 billdog authdaemond: authcram: trying this module
-Apr 14 14:07:15 billdog authdaemond: cram: only supports authtype=cram-*
-Apr 14 14:07:15 billdog authdaemond: authcram: REJECT - try next module
-Apr 14 14:07:15 billdog authdaemond: authuserdb: trying this module
-Apr 14 14:07:15 billdog authdaemond: userdb: opened /etc/userdb.dat
-Apr 14 14:07:15 billdog authdaemond: userdb: looking up 'brian'
-Apr 14 14:07:15 billdog authdaemond: userdb: entry not found
-Apr 14 14:07:15 billdog authdaemond: authuserdb: REJECT - try next module
-Apr 14 14:07:15 billdog authdaemond: authpam: trying this module
-Apr 14 14:07:15 billdog authdaemond: authpam: sysusername=brian, sysuserid=&lt;null&gt;, sysgroupid=1001, homedir=/home/brian, address=brian, fullname=Brian Candler, maildir=&lt;null&gt;, quota=&lt;null&gt;, options=&lt;null&gt;
-Apr 14 14:07:15 billdog authdaemond: pam_service=pop3, pam_username=brian
-Apr 14 14:07:15 billdog authdaemond: dopam successful
-Apr 14 14:07:15 billdog authdaemond: authpam: ACCEPT, username brian</pre>
-
-<p>What's happening here?</p>
-<ul>
-  <li>The request was received by 'authdaemond'</li>
-  <li>It tries 'authcustom' - this module does nothing unless you have
-    customised it yourself, so it REJECTs the request</li>
-  <li>It tried 'authcram', but since this was a request with authtype=login
-    (rather than authtype=cram-md5, say), this module cannot handle it so it
-    REJECTs</li>
-  <li>'authuserdb' has a go. In this case there is an /etc/userdb.dat file
-    for it to look in, but the requested username 'brian' does not exist in
-    there, so it REJECTs</li>
-  <li>'authpam' has a go. It finds the username and home directory in
-    /etc/passwd, and then calls the PAM subsystem to authenticate. The
-    authentication is successful.</li>
-</ul>
-
-<p>So, in principle, debugging is straightforward. Watch the modules operate,
-search for the one which you <i>think</i> should be authenticating the user,
-and if it is not, check for REJECT (user not known or password mismatch) or
-TEMPFAIL (internal error) status. Additional messages should indicate why
-this status was returned.</p>
-
-<h2>4. Read the documentation</h2>
-
-<p>Most of the configuration files like authldaprc, authmysql are well
-documented with comments.</p>
-
-<p>For the nitty-gritty details of authentication modules, see <a
-href="http://www.courier-mta.org/authlib.html">man authlib</a>. There is
-probably a copy of this manpage installed on your system; if that command
-doesn't work, try one of these:</p>
-<pre># man -M @prefix@/man authlib
-or
-# cd /path/to/sources
-# cd authlib
-# nroff -mandoc authlib.7.in | less</pre>
-
-<p>If you are using userdb authentication, you definitely need to read <a
-href="http://www.courier-mta.org/makeuserdb.html">man makeuserdb</a>, <a
-href="http://www.courier-mta.org/userdb.html">man userdb</a>, and <a
-href="http://www.courier-mta.org/userdbpw.html">man userdbpw</a>.</p>
-
-<h2>5. Use the mailing list</h2>
-
-<p>Please read through the common problems and solutions at the bottom of
-this document. The next thing to do, of course, is search the web to see if
-your particular problem has been seen before and solved. <a
-href="http://www.google.com">Google</a> is very good for this.</p>
-
-<p>If you still cannot work out what the problem is, then you can ask on the
-<a
-href="http://lists.sourceforge.net/mailman/listinfo/courier-imap">courier-imap</a>
-or <a href="mailto:sqwebmail-subscribe@inter7.com">sqwebmail</a> mailing
-lists. But before you post, please gather together all the following
-information:</p>
-<ul>
-  <li>The operating system and version you are running</li>
-  <li>The version of courier-imap/sqwebmail you have installed</li>
-  <li>The <code>./configure</code> command line you gave to build it</li>
-  <li>If you didn't build it yourself, where you got the package from (and if
-    possible, find out from the packager what options they used to build
-  it)</li>
-  <li>The versions of any other relevant software which you are linking
-    against, e.g. vpopmail, openldap, mysql, pgsql</li>
-  <li>The transcript of the 'telnet' session you used to test
-  [courier-imap]</li>
-  <li>The corresponding debug output which was generated for that session</li>
-  <li>The contents of the 'pop3d' and 'imapd' configuration files
-    [courier-imap]</li>
-  <li>The contents of the any other relevant configuration files, e.g.
-    authldaprc, authmysqlrc</li>
-  <li>A copy of the database entry you are trying to authenticate against:
-    e.g. the line from your userdb file, an LDAP entry, a row from your mysql
-    table, the line in /etc/password, etc.</li>
-</ul>
-
-<p>If you include all this, you are <i>much</i> more likely to get a helpful
-response.</p>
-<hr>
-
-<h2>Frequently seen authentication problems and solutions</h2>
-
-<p>See also the <a href="http://www.courier-mta.org/FAQ.html">Courier MTA
-FAQ</a></p>
-
-<h3>I get intermittent authentication problems with vpopmail</h3>
-
-<p>This is a known problem with vpopmail 5.2.1 and earlier. You need to
-upgrade to 5.2.2 or later, and then recompile courier-authlib.</p>
-
-<h3>Compiling fails with "cannot find -lvpopmail"</h3>
-
-<p>This is usually a permissions problem on the vpopmail library. Try:</p>
-<pre># chmod +rx /home/vpopmail /home/vpopmail/lib</pre>
-Alternatively, it might be a problem finding the vpopmail headers or library,
-in which case try:
-<pre># CPPFLAGS="-I/home/vpopmail/include"; export CPPFLAGS
-# LDFLAGS="-L/home/vpopmail/lib"; export LDFLAGS
-# ./configure ...</pre>
-
-<h3>When I try to login with POP3 using telnet, the server disconnects
-immediately after the "PASS" command, without giving a -ERR response</h3>
-
-<p>The reason for this error will probably be found in your mail logs.
-Usually it indicates either that the home directory does not exist (chdir
-failed), or the Maildir has not been created. See 'man maildirmake'.</p>
-
-<h3>PAM authentication says "pam_start failed, result 4 [Hint: bad PAM
-configuration?]"</h3>
-
-<p>Probably your PAM configuration is bad. If you have /etc/pam.d/other, then
-try simply removing /etc/pam.d/pop3 and /etc/pam.d/imap and see if it works
-(this is sufficient for FreeBSD). Otherwise, try copying one of your existing
-/etc/pam.d/xxx files to /etc/pam.d/pop3, imap or webmail respectively. <br>
-The result value is a PAM_XXXX constant from
-<code>/usr/include/security/pam_constants.h</code> (this file may be in a
-different location on your system). Under FreeBSD, 4 is PAM_SYSTEM_ERR.</p>
-
-<h3>When I connect on the SSL ports (995 or 993), the server accepts the
-connection but then immediately disconnects</h3>
-
-<p>You probably didn't install any SSL certificates. Courier-imap comes with
-scripts you can run to do this for you:</p>
-<pre># @prefix@/sbin/mkimapdcert
-# @prefix@/sbin/mkpop3dcert</pre>
-
-<h3>I expected the authentication library to compile authmysql (or some other
-module), but it's not there</h3>
-
-<p>If the mysql authentication module did not compile, then perhaps
-./configure was unable to find your mysql libraries (you can read through the
-file 'config.log' in the source directory to see what it found). You may need
-to force it to look in the right place, as follows:</p>
-<pre># ./configure --with-authmsql --with-mysql-libs=/usr/local/mysql/lib  \
-              --with-mysql-includes=/usr/local/mysql/include</pre>
-
-<p>On some systems (e.g. FreeBSD), the mysqlclient library depends on the
-math and compression libraries. For these systems, try:</p>
-<pre># LDFLAGS="-lm -lz" ./configure --with-authmysql ... same as before</pre>
-
-<h3>The POP3/IMAP server says "Temporary problem, please try again later"
-when a bad password is entered</h3>
-
-<p><code>authdaemond</code> tries each of the configured authentication
-modules in turn, until either one accepts the login, or they have all
-rejected it (in which case the usual "Login failed" error is returned, and
-the user can try again).</p>
-
-<p>However, if one of these modules is unable to run because some resource is
-not available, then it gives a "temporary failure" response and no further
-modules are tried. You should find the exact cause in your mail logs, but
-typically it means that you have a module like 'authmysql' in your module
-list, but the mysql database is not running.</p>
-
-<p>So unless you actually do have account data in mysql (in which case you
-need to fix your mysql setup), you should remove 'authmysql' and any other
-modules you do not use from <code>authmodulelist</code> in
-<code>authdaemonrc</code>.</p>
-</body>
-</html>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+
+<html xmlns="http://www.w3.org/1999/xhtml">
+<head>
+  <meta http-equiv="Content-Type" content="" />
+
+  <title>Debugging authentication problems</title>
+</head>
+
+<body bgcolor="#FFFFFF">
+  <h1 align="center">Debugging authentication problems</h1>
+
+  <p>A common problem after installing the Courier authentication
+  library is that authentication, using authtest, doesn't work.
+  This document shows how to use courier's debugging features to
+  pinpoint the problem.</p>
+
+  <h2>1. Turn on debugging</h2>
+
+  <p>For courier-imap, you need to set one of the following values
+  in @sysconfdir@/authdaemonrc:</p>
+  <pre>
+DEBUG_LOGIN=1    # turn on authentication debugging
+DEBUG_LOGIN=2    # turn on authentication debugging AND show passwords
+</pre>
+
+  <p>This setting is located at the very end of the configuration
+  file.</p>
+
+  <p>After changing this setting, restart the authentication daemon
+  by running the "authdaemond stop" and "authdaemond start"
+  commands.</p>
+
+  <p>At this point, all debugging output goes to syslog at level
+  'debug', which is normally not shown. You will probably need to
+  change your <code>/etc/syslog.conf</code> file to be able to see
+  these messages. If you have an existing entry which says
+  "mail.info" (which means facility 'mail', level 'info' or higher)
+  then you can just change this to "mail.debug". Alternatively you
+  can add a new entry like this:</p>
+  <pre>
+*.debug                        /var/log/debug
+</pre>
+
+  <p>Don't forget to create this file, and to send a HUP signal to
+  syslogd to make it re-read its configuration:</p>
+  <pre>
+# touch /var/log/debug
+# killall -1 syslogd
+</pre>
+
+  <p>If you don't want to mess around with your syslog
+  configuration, you can also start <code>authdaemond</code>
+  manually, and log its output to a file:</p>
+
+  <p><code>@libexecdir@/courier-authlib/authdaemond &gt;filename
+  2&gt;&amp;1</code></p>
+
+  <h2>2. Issue a manual login</h2>
+
+  <p>You can use the authtest command to verify authentication, or
+  go ahead and install Courier-IMAP.</p>
+
+  <p>For courier-imap, you will get much better information by not
+  using a mail client and manually logging in using 'telnet'. The
+  transcript of this telnet session may give useful information as
+  to what is going on. If you are going to report a problem to the
+  mailing list, you should certainly include this transcript as
+  well as the corresponding debugging output.</p>
+  <pre>
+-- to debug POP3 --
+# telnet x.x.x.x 110
+user USERNAME
+pass PASSWORD
+stat
+quit
+
+-- to debug IMAP --
+# telnet x.x.x.x 143
+a login USERNAME PASSWORD
+a examine inbox
+a logout
+
+-- to debug POP3 over SSL --
+# openssl s_client -connect x.x.x.x:995
+(then use same commands as POP3 example)
+
+-- to debug IMAP over SSL --
+# openssl s_client -connect x.x.x.x:993
+(then use same commands as IMAP example)
+</pre>
+
+  <p>This isn't an option for sqwebmail of course - just login
+  through the web interface and check the authentication debug log
+  which is generated.</p>
+
+  <h2>3. Interpret the debug output</h2>
+
+  <p>First, a brief explanation of courier's authentication system.
+  There are a number of standalone <b>authentication modules</b>.
+  An authentication module exists for every authentication method.
+  Each authentication module is installed as a shared library. When
+  <strong>authdaemond</strong> starts, it attempts to load and
+  initialize the authentication modules, logging the following
+  messages to syslog:</p>
+  <pre>
+Oct 17 11:25:37 commodore authdaemond: modules="authuserdb authpam authpgsql authldap authmysql authcustom", daemons=5
+Oct 17 11:25:37 commodore authdaemond: Installing libauthuserdb
+Oct 17 11:25:37 commodore authdaemond: Installation complete: authuserdb
+Oct 17 11:25:37 commodore authdaemond: Installing libauthpam
+Oct 17 11:25:37 commodore authdaemond: Installation complete: authpam
+Oct 17 11:25:37 commodore authdaemond: Installing libauthpgsql
+Oct 17 11:25:37 commodore authdaemond: libauthpgsql.so: cannot open shared object file: No such file or directory
+Oct 17 11:25:37 commodore authdaemond: Installing libauthldap
+Oct 17 11:25:37 commodore authdaemond: libauthldap.so: cannot open shared object file: No such file or directory
+Oct 17 11:25:37 commodore authdaemond: Installing libauthmysql
+Oct 17 11:25:37 commodore authdaemond: libauthmysql.so: cannot open shared object file: No such file or directory
+Oct 17 11:25:37 commodore authdaemond: Installing libauthcustom
+Oct 17 11:25:37 commodore authdaemond: Installation complete: authcustom
+</pre>
+
+  <p>The first message lists all authentication modules that were
+  compiled, and indicates that <strong>authdaemond</strong> will
+  spawn five processes to handle all authentication requests. This
+  is followed by messages indicating that indicate which
+  authentication modules were installed.</p>
+
+  <p>In this example, authdaemond did not load the authpgsql,
+  authldap, and authmysql modules. That's because in this case the
+  Courier authentication library is installed by the system's
+  package manager. The LDAP, MySQL, and PostgreSQL support was
+  placed into optional sub-packages which are not installed. Even
+  though all of these modules were initially compiled, the optional
+  authentication modules were not installed.</p>
+
+  <p>This is normal. authdaemond will simply ignore any
+  authentication module it cannot find, and will activate only
+  those modules that are available. When an authentication request
+  comes in, all of the modules will be executed, one after the
+  other, resulting in one of three conditions:</p>
+
+  <dl>
+    <dt>ACCEPT</dt>
+
+    <dd>The user was authenticated successfully</dd>
+
+    <dt>REJECT</dt>
+
+    <dd>The module did not know this username, or the user gave
+    invalid credentials. The request is passed to the next
+    module.</dd>
+
+    <dt>TEMPFAIL</dt>
+
+    <dd>The module suffered an internal failure, such as inability
+    to contact an external database. The login is rejected, and no
+    further modules are tried.</dd>
+  </dl>
+
+  <p>In a typical Courier installation the authentication request
+  is sent, via a filesystem socket, to a pool of <b>authdaemond</b>
+  processes (note the extra "d" on the end) which perform the
+  actual work. authdaemond, in turn, contains other authentication
+  modules such as authpam, authmysql, and so on.</p>
+
+  <p>If <code>authdaemond</code> is running successfully, then it
+  will in turn run each of the modules it is linked against. If any
+  one returns REJECT then the next is tried; if any returns
+  TEMPFAIL or ACCEPT then no further modules are tried.</p>
+
+  <p>So a typical example might look like this:</p>
+  <pre>
+Apr 14 14:07:15 billdog authdaemond: received auth request, service=pop3, authtype=login
+Apr 14 14:07:15 billdog authdaemond: authcustom: trying this module
+Apr 14 14:07:15 billdog authdaemond: authcustom: nothing implemented in do_auth_custom()
+Apr 14 14:07:15 billdog authdaemond: authcustom: REJECT - try next module
+Apr 14 14:07:15 billdog authdaemond: authcram: trying this module
+Apr 14 14:07:15 billdog authdaemond: cram: only supports authtype=cram-*
+Apr 14 14:07:15 billdog authdaemond: authcram: REJECT - try next module
+Apr 14 14:07:15 billdog authdaemond: authuserdb: trying this module
+Apr 14 14:07:15 billdog authdaemond: userdb: opened /etc/userdb.dat
+Apr 14 14:07:15 billdog authdaemond: userdb: looking up 'brian'
+Apr 14 14:07:15 billdog authdaemond: userdb: entry not found
+Apr 14 14:07:15 billdog authdaemond: authuserdb: REJECT - try next module
+Apr 14 14:07:15 billdog authdaemond: authpam: trying this module
+Apr 14 14:07:15 billdog authdaemond: authpam: sysusername=brian, sysuserid=&lt;null&gt;, sysgroupid=1001, homedir=/home/brian, address=brian, fullname=Brian Candler, maildir=&lt;null&gt;, quota=&lt;null&gt;, options=&lt;null&gt;
+Apr 14 14:07:15 billdog authdaemond: pam_service=pop3, pam_username=brian
+Apr 14 14:07:15 billdog authdaemond: dopam successful
+Apr 14 14:07:15 billdog authdaemond: authpam: ACCEPT, username brian
+</pre>
+
+  <p>What's happening here?</p>
+
+  <ul>
+    <li>The request was received by 'authdaemond'</li>
+
+    <li>It tries 'authcustom' - this module does nothing unless you
+    have customised it yourself, so it REJECTs the request</li>
+
+    <li>It tried 'authcram', but since this was a request with
+    authtype=login (rather than authtype=cram-md5, say), this
+    module cannot handle it so it REJECTs</li>
+
+    <li>'authuserdb' has a go. In this case there is an
+    /etc/userdb.dat file for it to look in, but the requested
+    username 'brian' does not exist in there, so it REJECTs</li>
+
+    <li>'authpam' has a go. It finds the username and home
+    directory in /etc/passwd, and then calls the PAM subsystem to
+    authenticate. The authentication is successful.</li>
+  </ul>
+
+  <p>So, in principle, debugging is straightforward. Watch the
+  modules operate, search for the one which you <i>think</i> should
+  be authenticating the user, and if it is not, check for REJECT
+  (user not known or password mismatch) or TEMPFAIL (internal
+  error) status. Additional messages should indicate why this
+  status was returned.</p>
+
+  <h2>4. Read the documentation</h2>
+
+  <p>Most of the configuration files like authldaprc, authmysql are
+  well documented with comments.</p>
+
+  <p>For the nitty-gritty details of authentication modules, see
+  <a href="http://www.courier-mta.org/authlib.html">man
+  authlib</a>. There is probably a copy of this manpage installed
+  on your system; if that command doesn't work, try one of
+  these:</p>
+  <pre>
+# man -M @prefix@/man authlib
+or
+# cd /path/to/sources
+# cd authlib
+# nroff -mandoc authlib.7.in | less
+</pre>
+
+  <p>If you are using userdb authentication, you definitely need to
+  read <a href="http://www.courier-mta.org/makeuserdb.html">man
+  makeuserdb</a>, <a href=
+  "http://www.courier-mta.org/userdb.html">man userdb</a>, and
+  <a href="http://www.courier-mta.org/userdbpw.html">man
+  userdbpw</a>.</p>
+
+  <h2>5. Use the mailing list</h2>
+
+  <p>Please read through the common problems and solutions at the
+  bottom of this document. The next thing to do, of course, is
+  search the web to see if your particular problem has been seen
+  before and solved. <a href="http://www.google.com">Google</a> is
+  very good for this.</p>
+
+  <p>If you still cannot work out what the problem is, then you can
+  ask on the appropriate <a href=
+  "http://www.courier-mta.org/links.html">mailing list</a>. But
+  before you post, please gather together all the following
+  information:</p>
+
+  <ul>
+    <li>The operating system and version you are running</li>
+
+    <li>The versions of packages you have installed</li>
+
+    <li>The <code>./configure</code> command line you gave to build
+    it</li>
+
+    <li>If you didn't build it yourself, where you got the package
+    from (and if possible, find out from the packager what options
+    they used to build it)</li>
+
+    <li>The versions of any other relevant software which you are
+    linking against, e.g. openldap, mysql, pgsql</li>
+
+    <li>The transcript of the 'telnet' session you used to manually
+    test server connections</li>
+
+    <li>The corresponding debug output which was generated for that
+    session</li>
+
+    <li>The contents of relevant configuration files, e.g.
+    authldaprc, authmysqlrc, imapd, pop3d</li>
+
+    <li>A copy of the database entry you are trying to authenticate
+    against: e.g. the line from your userdb file, an LDAP entry, a
+    row from your mysql table, the line in /etc/password, etc.</li>
+  </ul>
+
+  <p>If you include all this, you are <i>much</i> more likely to
+  get a helpful response.</p>
+  <hr />
+
+  <h2>Frequently seen authentication problems and solutions</h2>
+
+  <p>See also the <a href=
+  "http://www.courier-mta.org/FAQ.html">Courier MTA FAQ</a></p>
+
+  <h3>When I try to login with POP3 using telnet, the server
+  disconnects immediately after the "PASS" command, without giving
+  a -ERR response</h3>
+
+  <p>The reason for this error will probably be found in your mail
+  logs. Usually it indicates either that the home directory does
+  not exist (chdir failed), or the Maildir has not been created.
+  See 'man maildirmake'.</p>
+
+  <h3>PAM authentication says "pam_start failed, result 4 [Hint:
+  bad PAM configuration?]"</h3>
+
+  <p>Probably your PAM configuration is bad. If you have
+  /etc/pam.d/other, then try simply removing /etc/pam.d/pop3 and
+  /etc/pam.d/imap and see if it works (this is sufficient for
+  FreeBSD). Otherwise, try copying one of your existing
+  /etc/pam.d/xxx files to /etc/pam.d/pop3, imap or webmail
+  respectively.<br />
+  The result value is a PAM_XXXX constant from
+  <code>/usr/include/security/pam_constants.h</code> (this file may
+  be in a different location on your system). Under FreeBSD, 4 is
+  PAM_SYSTEM_ERR.</p>
+
+  <h3>When I connect on the SSL ports (995 or 993), the server
+  accepts the connection but then immediately disconnects</h3>
+
+  <p>You probably didn't install any SSL certificates. Courier-imap
+  comes with scripts you can run to do this for you:</p>
+  <pre>
+# @prefix@/sbin/mkimapdcert
+# @prefix@/sbin/mkpop3dcert
+</pre>
+
+  <h3>I expected the authentication library to compile authmysql
+  (or some other module), but it's not there</h3>
+
+  <p>If the mysql authentication module did not compile, then
+  perhaps ./configure was unable to find your mysql libraries (you
+  can read through the file 'config.log' in the source directory to
+  see what it found). You may need to force it to look in the right
+  place, as follows:</p>
+  <pre>
+# ./configure --with-authmsql --with-mysql-libs=/usr/local/mysql/lib  \
+              --with-mysql-includes=/usr/local/mysql/include
+</pre>
+
+  <p>On some systems (e.g. FreeBSD), the mysqlclient library
+  depends on the math and compression libraries. For these systems,
+  try:</p>
+  <pre>
+# LDFLAGS="-lm -lz" ./configure --with-authmysql ... same as before
+</pre>
+
+  <h3>The POP3/IMAP server says "Temporary problem, please try
+  again later" when a bad password is entered</h3>
+
+  <p><code>authdaemond</code> tries each of the configured
+  authentication modules in turn, until either one accepts the
+  login, or they have all rejected it (in which case the usual
+  "Login failed" error is returned, and the user can try
+  again).</p>
+
+  <p>However, if one of these modules is unable to run because some
+  resource is not available, then it gives a "temporary failure"
+  response and no further modules are tried. You should find the
+  exact cause in your mail logs, but typically it means that you
+  have a module like 'authmysql' in your module list, but the mysql
+  database is not running.</p>
+
+  <p>So unless you actually do have account data in mysql (in which
+  case you need to fix your mysql setup), you should remove
+  'authmysql' and any other modules you do not use from
+  <code>authmodulelist</code> in <code>authdaemonrc</code>.</p>
+</body>
+</html>
index 1890b53..bca1ffd 100644 (file)
 
   <h2>Further resources</h2>
 
-  <p>Subscribe to the courier-users mailing list: <a href=
-  "http://lists.sourceforge.net/lists/listinfo/courier-users"><code>
-  http://lists.sourceforge.net/lists/listinfo/courier-users</code></a>.</p>
+  <p>Subscribe to the <i><a target="_blank" href=
+  "http://lists.sourceforge.net/mailman/listinfo/courier-users">courier-users</a></i>
+  mailing list. Go to
+  <code>http://lists.sourceforge.net/mailman/listinfo/courier-users</code>
+  to subscribe to <i>courier-users</i>, or send a message to
+  <code>&lt;courier-users-request</code><code>@lists.sourceforge.net&gt;</code>
+  and put "subscribe" in the subject line. Search the list archives
+  at <a target="_blank" href=
+  "http://markmail.org/browse/net.sourceforge.lists.courier-users">http://markmail.org/browse/net.sourceforge.lists.courier-users</a>.</p>
 </body>
 </html>
index 3acb0ff..c587ada 100644 (file)
@@ -28,6 +28,10 @@ Only CourierMailAccount is used for mailbox authentication (i.e. IMAP,
 webmail).  The other two objects are used by LDAP-based mail routing
 in the Courier Mail Server.
 
+The file authldap.ldif contains an ldif format definition of the same objects.
+This is the same schema definition as in authldap.schema, except in the ldif
+format.
+
 Here are some sample LDAP objects that use this schema:
 
 dn: o=example, c=com
@@ -37,8 +41,10 @@ c: com
 
 dn: mail=xyz123@example.com, o=example, c=com
 ObjectClass: CourierMailAccount
+ObjectClass: person
+cn: Xavier Y Zimmerman
+sn: Zimmerman
 mail: xyz123@example.com
-mail: xyz123
 clearPassword: tux
 userPassword: {MD5}WrbkuYvH+3FvwH7Zj+34Ag==
 homeDirectory: /home/xyz123
@@ -47,11 +53,15 @@ gidNumber: 1001
 
 dn: mail=mailalias@example.com, o=example, c=com
 ObjectClass: CourierMailAlias
+ObjectClass: nisMailAlias
+cn: mailalias
 mail: mailalias
 maildrop: xyz123
 
 dn: virtualdomain=domain.com, o=example, c=com
+ObjectClass: nisMailAlias
 ObjectClass: CourierDomainAlias
+cn: domain.com
 virtualdomain: domain.com
 virtualdomainuser: wxyz456
 
index 26c8db3..23862b3 100644 (file)
@@ -1,7 +1,7 @@
 <?xml version="1.0"?>
-<html xmlns="http://www.w3.org/1999/xhtml"><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/><title>Courier Authentication Library</title><link rel="stylesheet" href="style.css" type="text/css"/><meta name="generator" content="DocBook XSL Stylesheets V1.73.2"/><link rel="start" href="#authlib" title="Courier Authentication Library"/><link rel="next" href="#authpwd" title="The authpwd authentication module"/><link xmlns="" rel="stylesheet" type="text/css" href="manpage.css"/><meta xmlns="" name="MSSmartTagsPreventParsing" content="TRUE"/><link xmlns="" rel="icon" href="icon.gif" type="image/gif"/><!--
+<html xmlns="http://www.w3.org/1999/xhtml"><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/><title>Courier Authentication Library</title><link rel="stylesheet" href="style.css" type="text/css"/><meta name="generator" content="DocBook XSL Stylesheets V1.74.0"/><link rel="home" href="#authlib" title="Courier Authentication Library"/><link rel="next" href="#authpwd" title="The authpwd authentication module"/><link xmlns="" rel="stylesheet" type="text/css" href="manpage.css"/><meta xmlns="" name="MSSmartTagsPreventParsing" content="TRUE"/><link xmlns="" rel="icon" href="icon.gif" type="image/gif"/><!--
 
-Copyright 1998 - 2007 Double Precision, Inc.  See COPYING for distribution
+Copyright 1998 - 2009 Double Precision, Inc.  See COPYING for distribution
 information.
 
 --></head><body><div class="chapter" lang="en" xml:lang="en"><div class="titlepage"><div><div><h1 class="title"><a id="authlib" shape="rect"> </a>Courier Authentication Library</h1></div></div></div><div class="toc"><p><b>Table of Contents</b></p><dl><dt><span class="sect1"><a href="#authpwd" shape="rect">The <code class="literal">authpwd</code> authentication module</a></span></dt><dt><span class="sect1"><a href="#authshadow" shape="rect">The <code class="literal">authshadow</code> authentication module</a></span></dt><dt><span class="sect1"><a href="#authpam" shape="rect">The <code class="literal">authpam</code> authentication module</a></span></dt><dt><span class="sect1"><a href="#authpipe" shape="rect">The <code class="literal">authpipe</code> authentication module</a></span></dt><dt><span class="sect1"><a href="#authpipeproto" shape="rect">The <code class="literal">authpipe</code> protocol</a></span></dt><dt><span class="sect1"><a href="#authuserdb" shape="rect">The <code class="literal">authuserdb</code> authentication module</a></span></dt><dd><dl><dt><span class="sect2"><a href="#userdbprimer" shape="rect">A brief <code class="literal">userdb</code> primer</a></span></dt><dt><span class="sect2"><a href="#userdbsimple" shape="rect">A simple userdb setup</a></span></dt><dt><span class="sect2"><a href="#userdbcomplex" shape="rect">Large virtual domain farm</a></span></dt><dt><span class="sect2"><a href="#moreuserdb" shape="rect">Beyond <code class="literal">userdb</code></a></span></dt></dl></dd><dt><span class="sect1"><a href="#authmysql" shape="rect">The <code class="literal">authmysql</code> authentication module</a></span></dt><dt><span class="sect1"><a href="#authpgsql" shape="rect">The <code class="literal">authpgsql</code> authentication module</a></span></dt><dt><span class="sect1"><a href="#authldap" shape="rect">The <code class="literal">authldap</code> authentication module</a></span></dt><dt><span class="sect1"><a href="#authcustom" shape="rect"><code class="literal">authcustom</code></a></span></dt><dt><span class="sect1"><a href="#options" shape="rect">Account options</a></span></dt><dt><span class="sect1"><a href="#authtest" shape="rect">Running <span class="command"><strong>authtest</strong></span></a></span></dt><dd><dl><dt><span class="sect2"><a href="#pwchange" shape="rect">Changing account passwords</a></span></dt></dl></dd><dt><span class="sect1"><a href="#internals" shape="rect">Authentication internals</a></span></dt><dt><span class="sect1"><a href="#files" shape="rect">FILES</a></span></dt><dt><span class="sect1"><a href="#seealso" shape="rect">SEE ALSO</a></span></dt></dl></div><p>
@@ -164,10 +164,10 @@ request is a single line terminated by newline.
     necessarily end with a newline. The currently defined authentication
     requests are:
     </p><pre class="screen" xml:space="preserve">
-    login \n username \n password [\n]         -- plaintext login
-    cram-md5 \n challenge \n response [\n]     -- base-64 encoded challenge and response
-    cram-sha1 \n challenge \n response [\n]    -- ditto
-    cram-sha256 \n challenge \n response [\n]  -- ditto
+    service \n login \n username \n password [\n]         -- plaintext login
+    service \n cram-md5 \n challenge \n response [\n]     -- base-64 encoded challenge and response
+    service \n cram-sha1 \n challenge \n response [\n]    -- ditto
+    service \n cram-sha256 \n challenge \n response [\n]  -- ditto
     </pre><p>
     In the case of success, return the complete set of
     account parameters in the same format as PRE, ending with a period on 
index 9bfed84..1b0d2ad 100644 (file)
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(AC_AUTOCONF_VERSION, [2.61],,
-[m4_warning([this file was generated for autoconf 2.61.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
+# Portability macros for glibc argz.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan <gary@gnu.org>
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 argz.m4
+
+AC_DEFUN([gl_FUNC_ARGZ],
+[gl_PREREQ_ARGZ
+
+AC_CHECK_HEADERS([argz.h], [], [], [AC_INCLUDES_DEFAULT])
+
+AC_CHECK_TYPES([error_t],
+  [],
+  [AC_DEFINE([error_t], [int],
+   [Define to a type to use for `error_t' if it is not otherwise available.])
+   AC_DEFINE([__error_t_defined], [1], [Define so that glibc/gnulib argp.h
+    does not typedef error_t.])],
+  [#if defined(HAVE_ARGZ_H)
+#  include <argz.h>
+#endif])
+
+ARGZ_H=
+AC_CHECK_FUNCS([argz_add argz_append argz_count argz_create_sep argz_insert \
+       argz_next argz_stringify], [], [ARGZ_H=argz.h; AC_LIBOBJ([argz])])
+
+dnl if have system argz functions, allow forced use of
+dnl libltdl-supplied implementation (and default to do so
+dnl on "known bad" systems). Could use a runtime check, but
+dnl (a) detecting malloc issues is notoriously unreliable
+dnl (b) only known system that declares argz functions,
+dnl     provides them, yet they are broken, is cygwin
+dnl     releases prior to 16-Mar-2007 (1.5.24 and earlier)
+dnl So, it's more straightforward simply to special case
+dnl this for known bad systems.
+AS_IF([test -z "$ARGZ_H"],
+    [AC_CACHE_CHECK(
+        [if argz actually works],
+        [lt_cv_sys_argz_works],
+        [[case $host_os in #(
+        *cygwin*)
+          lt_cv_sys_argz_works=no
+          if test "$cross_compiling" != no; then
+            lt_cv_sys_argz_works="guessing no"
+          else
+            lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/'
+            save_IFS=$IFS
+            IFS=-.
+            set x `uname -r | sed -e "$lt_sed_extract_leading_digits"`
+            IFS=$save_IFS
+            lt_os_major=${2-0}
+            lt_os_minor=${3-0}
+            lt_os_micro=${4-0}
+            if test "$lt_os_major" -gt 1 \
+               || { test "$lt_os_major" -eq 1 \
+                 && { test "$lt_os_minor" -gt 5 \
+                   || { test "$lt_os_minor" -eq 5 \
+                     && test "$lt_os_micro" -gt 24; }; }; }; then
+              lt_cv_sys_argz_works=yes
+            fi
+          fi
+          ;; #(
+        *) lt_cv_sys_argz_works=yes ;;
+        esac]])
+     AS_IF([test $lt_cv_sys_argz_works = yes],
+        [AC_DEFINE([HAVE_WORKING_ARGZ], 1,
+                   [This value is set to 1 to indicate that the system argz facility works])],
+        [ARGZ_H=argz.h
+        AC_LIBOBJ([argz])])])
+
+AC_SUBST([ARGZ_H])
+])
+
+# Prerequisites of lib/argz.c.
+AC_DEFUN([gl_PREREQ_ARGZ], [:])
+
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
 
-# serial 51 AC_PROG_LIBTOOL
+# serial 56 LT_INIT
 
 
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
-         [],
-         [m4_define([AC_PROVIDE_IFELSE],
-                [m4_ifdef([AC_PROVIDE_$1],
-                          [$2], [$3])])])
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+                  [m4_fatal([Libtool version $1 or higher is required],
+                            63)])],
+       [$2])])
 
 
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-       [AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-            [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-            [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-            [define([LT_AC_PROG_GCJ],
-               defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\    *)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ltmain"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 AC_SUBST(LIBTOOL)dnl
 
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
+_LT_SETUP
 
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
 
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
 AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
 dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
+_LT_CHECK_OBJDIR
 
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -131,6462 +296,8563 @@ esac
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
-
 # Global variables:
-default_ofile=libtool
+ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
 _LT_CC_BASENAME([$compiler])
 
 # Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
+    _LT_PATH_MAGIC
   fi
   ;;
 esac
 
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
 
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-       [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-       [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
 
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
 
 
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_AC_SYS_COMPILER
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
 
 
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
 ])
 
 
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_COMPILER_BOILERPLATE
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+       [m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+       [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+       [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
 
 
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_LINKER_BOILERPLATE
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
 
 
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-       /^0/ {
-           s/^0  *\(.*\)$/\1/
-           p
-       }
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
 
 
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-            [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-        [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
 
 
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
 
-case X$ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
 
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
 
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-[$]*
-EOF
-  exit 0
-fi
 
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+          m4_quote(lt_decl_varnames),
+       m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+                       lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
-    IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-        test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-        echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-        test "X$echo_testing_string" = "X$echo_test_string"; then
-       # Cool, printf works
-       :
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-          test "X$echo_testing_string" = 'X\t' &&
-          echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-          test "X$echo_testing_string" = "X$echo_test_string"; then
-       CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-       export CONFIG_SHELL
-       SHELL="$CONFIG_SHELL"
-       export SHELL
-       echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-          test "X$echo_testing_string" = 'X\t' &&
-          echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-          test "X$echo_testing_string" = "X$echo_test_string"; then
-       echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      else
-       # maybe with a smaller string...
-       prev=:
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
 
-       for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-         if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-         then
-           break
-         fi
-         prev="$cmd"
-       done
 
-       if test "$prev" != 'sed 50q "[$]0"'; then
-         echo_test_string=`eval $prev`
-         export echo_test_string
-         exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-       else
-         # Oops.  We lost completely, so just stick with echo.
-         echo=echo
-       fi
-      fi
-    fi
-  fi
-fi
-fi
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
 
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
 
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
 
 
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-       [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+                                          [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
 
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
-  fi
-  rm -rf conftest*
-  ;;
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_i386_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+       dnl If the libtool generation code has been placed in $CONFIG_LT,
+       dnl instead of duplicating it all over again into config.status,
+       dnl then we will have config.status run $CONFIG_LT later, so it
+       dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
-    *64-bit*)
-      libsuff=64
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_x86_64_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
       ;;
     esac
-  fi
-  rm -rf conftest*
-  ;;
+done
 
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
-      esac
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
       ;;
     esac
-  fi
-  rm -rf conftest*
-  ;;
+done
 
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
   ;;
-  ])
 esac
 
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#              [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $rm conftest*
+_LT_OUTPUT_LIBTOOL_INIT
 ])
 
-if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
-else
-    ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
 
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
 
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $rm conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
 
-if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
-else
-    ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
+Usage: $[0] [[OPTIONS]]
 
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
 
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
+Report bugs to <bug-libtool@gnu.org>."
 
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
 
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
 
-  cygwin* | mingw*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
 
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536      # usable default for all BSDs
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
     fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
 
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
 
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[       ]]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-              = "XX$teststring") >/dev/null 2>&1 &&
-             new_result=`expr "X$teststring" : ".*" 2>&1` &&
-             lt_cv_sys_max_cmd_len=$new_result &&
-             test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on massive
-      # amounts of additional arguments before passing them to the linker.
-      # It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
 
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
 
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
 
+_LT_EOF
 
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
 
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
+  _LT_PROG_LTMAIN
 
-#include <stdio.h>
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
 
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL          RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL                DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL                0
-#  endif
-#endif
+  _LT_PROG_XSI_SHELLFNS
 
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW           RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW         DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW       RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW     DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW     0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
 
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
 
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
 
-    exit (status);
-}]
-EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_dlunknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
 
 
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
 
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
 
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],                 [_LT_LANG(C)],
+  [C++],               [_LT_LANG(CXX)],
+  [Java],              [_LT_LANG(GCJ)],
+  [Fortran 77],                [_LT_LANG(F77)],
+  [Fortran],           [_LT_LANG(FC)],
+  [Windows Resource],  [_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
 
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
 
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-   ;;
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+       [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+       [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+       [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
 
-  *)
-    AC_CHECK_FUNC([shl_load],
-         [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-           [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
-       [AC_CHECK_FUNC([dlopen],
-             [lt_cv_dlopen="dlopen"],
-         [AC_CHECK_LIB([dl], [dlopen],
-               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-           [AC_CHECK_LIB([svld], [dlopen],
-                 [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-             [AC_CHECK_LIB([dld], [dld_link],
-                   [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
-             ])
-           ])
-         ])
-       ])
-      ])
-    ;;
-  esac
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
 
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-         lt_cv_dlopen_self, [dnl
-         _LT_AC_TRY_DLOPEN_SELF(
-           lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-           lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
 
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-         lt_cv_dlopen_self_static, [dnl
-         _LT_AC_TRY_DLOPEN_SELF(
-           lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-           lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+       # By default we will add the -single_module flag. You can override
+       # by either setting the environment variable LT_MULTI_MODULE
+       # non-empty at configure time, or by adding -multi_module to the
+       # link flags.
+       rm -rf libconftest.dylib*
+       echo "int foo(void){return 1;}" > conftest.c
+       echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+       $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+         -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+       if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+         lt_cv_apple_cc_single_mod=yes
+       else
+         cat conftest.err >&AS_MESSAGE_LOG_FD
+       fi
+       rm -rf libconftest.dylib*
+       rm -f conftest.*
+      fi])
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+       [lt_cv_ld_exported_symbols_list=yes],
+       [lt_cv_ld_exported_symbols_list=no])
+       LDFLAGS="$save_LDFLAGS"
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+       10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+         _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+       10.[[012]]*)
+         _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+       10.*)
+         _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
     ;;
   esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
   esac
+])
 
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
   esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
 
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+       /^0/ {
+           s/^0  *\(.*\)$/\1/
+           p
+       }
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_SYS_MODULE_PATH_AIX
 
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+            [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+        [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_SHELL_INIT
 
 
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
 
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
+case X$lt_ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
+  :
 else
-  need_locks=no
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
 fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
 
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<_LT_EOF
+[$]*
+_LT_EOF
+  exit 0
 fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
 
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+        { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
   else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
+
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
+    IFS="$lt_save_ifs"
+
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+          test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+      else
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+          echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+          test "X$echo_testing_string" = "X$echo_test_string"; then
+         # Cool, printf works
+         :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+            test "X$echo_testing_string" = 'X\t' &&
+            echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+            test "X$echo_testing_string" = "X$echo_test_string"; then
+         CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+         export CONFIG_SHELL
+         SHELL="$CONFIG_SHELL"
+         export SHELL
+         ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+            test "X$echo_testing_string" = 'X\t' &&
+            echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+            test "X$echo_testing_string" = "X$echo_test_string"; then
+         ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+         # maybe with a smaller string...
+         prev=:
+
+         for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+           if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+           then
+             break
+           fi
+           prev="$cmd"
+         done
+
+         if test "$prev" != 'sed 50q "[$]0"'; then
+           echo_test_string=`eval $prev`
+           export echo_test_string
+           exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+         else
+           # Oops.  We lost completely, so just stick with echo.
+           ECHO=echo
+         fi
+        fi
+      fi
+    fi
   fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
 fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
 
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
 fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
 
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
 
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         old_striplib="$STRIP -S"
-         AC_MSG_RESULT([yes])
-       else
-  AC_MSG_RESULT([no])
-fi
-       ;;
-   *)
-  AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
 
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+       HPUX_IA64_MODE="32"
+       ;;
+      *ELF-64*)
+       HPUX_IA64_MODE="64"
+       ;;
+    esac
   fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+       *32-bit*)
+         LD="${LD-ld} -melf32bsmip"
+         ;;
+       *N32*)
+         LD="${LD-ld} -melf32bmipn32"
+         ;;
+       *64-bit*)
+         LD="${LD-ld} -melf64bmip"
+       ;;
+      esac
     else
-      test -d "$lt_sys_path" && \
-       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+      case `/usr/bin/file conftest.$ac_objext` in
+       *32-bit*)
+         LD="${LD-ld} -32"
+         ;;
+       *N32*)
+         LD="${LD-ld} -n32"
+         ;;
+       *64-bit*)
+         LD="${LD-ld} -64"
+         ;;
+      esac
     fi
-  done
-  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`echo $lt_search_path_spec`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  fi
+  rm -rf conftest*
   ;;
 
-aix4* | aix5*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-          echo ' yes '
-          echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-       :
-      else
-       can_build_shared=no
-      fi
-      ;;
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+       case $host in
+         x86_64-*kfreebsd*-gnu)
+           LD="${LD-ld} -m elf_i386_fbsd"
+           ;;
+         x86_64-*linux*)
+           LD="${LD-ld} -m elf_i386"
+           ;;
+         ppc64-*linux*|powerpc64-*linux*)
+           LD="${LD-ld} -m elf32ppclinux"
+           ;;
+         s390x-*linux*)
+           LD="${LD-ld} -m elf_s390"
+           ;;
+         sparc64-*linux*)
+           LD="${LD-ld} -m elf32_sparc"
+           ;;
+       esac
+       ;;
+      *64-bit*)
+       case $host in
+         x86_64-*kfreebsd*-gnu)
+           LD="${LD-ld} -m elf_x86_64_fbsd"
+           ;;
+         x86_64-*linux*)
+           LD="${LD-ld} -m elf_x86_64"
+           ;;
+         ppc*-*linux*|powerpc*-*linux*)
+           LD="${LD-ld} -m elf64ppc"
+           ;;
+         s390*-*linux*|s390*-*tpf*)
+           LD="${LD-ld} -m elf64_s390"
+           ;;
+         sparc*-*linux*)
+           LD="${LD-ld} -m elf64_sparc"
+           ;;
+       esac
+       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
   fi
+  rm -rf conftest*
   ;;
 
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
   ;;
-
-bsdi[[45]]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)
+       if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+         LD="${LD-ld} -64"
+       fi
+       ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
   ;;
+esac
 
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
 
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
 
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
 
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
 
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
 
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[123]]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
+if test -n "$RANLIB"; then
   case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
     ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
     ;;
   esac
-  ;;
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
 
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
 
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[[3-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#              [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $RM conftest*
+])
 
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-       if test "$lt_cv_prog_gnu_ld" = yes; then
-               version_type=linux
-       else
-               version_type=irix
-       fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
+if test x"[$]$2" = xyes; then
+    m4_if([$5], , :, [$5])
+else
+    m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
 
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
 
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[         ]*hwcap[        ]/d;s/[:,       ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
 
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
+if test x"[$]$2" = xyes; then
+    m4_if([$4], , :, [$4])
+else
+    m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
 
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
 
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
 
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
 
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-       shlibpath_overrides_runpath=no
-       ;;
-      *)
-       shlibpath_overrides_runpath=yes
-       ;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
 
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
 
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
 
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-       ;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
 
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536      # usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
 
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-        [include additional configurations @<:@automatic@:>@])],
-    [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
 
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[        ]]//'`
     else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+      lt_cv_sys_max_cmd_len=32768
     fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+                = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+             test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
 
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
 
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-       ;;
-    esac
 
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
 
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
 
-      case $tagname in
-      CXX)
-       if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-           ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-           (test "X$CXX" != "Xg++"))) ; then
-         AC_LIBTOOL_LANG_CXX_CONFIG
-       else
-         tagname=""
-       fi
-       ;;
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
 
-      F77)
-       if test -n "$F77" && test "X$F77" != "Xno"; then
-         AC_LIBTOOL_LANG_F77_CONFIG
-       else
-         tagname=""
-       fi
-       ;;
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
 
-      GCJ)
-       if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-         AC_LIBTOOL_LANG_GCJ_CONFIG
-       else
-         tagname=""
-       fi
-       ;;
+#include <stdio.h>
 
-      RC)
-       AC_LIBTOOL_LANG_RC_CONFIG
-       ;;
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL          RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL                DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL                0
+#  endif
+#endif
 
-      *)
-       AC_MSG_ERROR([Unsupported tag name: $tagname])
-       ;;
-      esac
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW           RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW         DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW       RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW     DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW     0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
 
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
 
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
   else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
+    puts (dlerror ());
+
+  return status;
+}]
+_LT_EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
   fi
 fi
-])# _LT_AC_TAGCONFIG
-
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
 
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
 
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
 
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
 
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
 
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-       [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_shared=yes
-       fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
 
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+    ;;
 
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
+  *)
+    AC_CHECK_FUNC([shl_load],
+         [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+           [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+       [AC_CHECK_FUNC([dlopen],
+             [lt_cv_dlopen="dlopen"],
+         [AC_CHECK_LIB([dl], [dlopen],
+               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+           [AC_CHECK_LIB([svld], [dlopen],
+                 [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+             [AC_CHECK_LIB([dld], [dld_link],
+                   [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+             ])
+           ])
+         ])
+       ])
+      ])
+    ;;
+  esac
 
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
 
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-       [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_static=yes
-       fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
 
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+         lt_cv_dlopen_self, [dnl
+         _LT_TRY_DLOPEN_SELF(
+           lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+           lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
 
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_fast_install=yes
-       fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+         lt_cv_dlopen_self_static, [dnl
+         _LT_TRY_DLOPEN_SELF(
+           lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+           lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
 
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
 
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
 
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+        [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+        [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+        [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
 
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
 
 
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-       case $deplibs_check_method in
-       "file_magic "*)
-         file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-           $EGREP "$file_magic_regex" > /dev/null; then
-           :
-         else
-           cat <<EOF 1>&2
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+       [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
 
-EOF
-         fi ;;
-       esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
 
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
 
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
 fi
-])# AC_PATH_MAGIC
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
 
 
-# AC_PROG_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-       [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by $CC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-       ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
 else
-  AC_MSG_CHECKING([for non-GNU ld])
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
 fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-       test "$with_gnu_ld" != no && break
-       ;;
-      *)
-       test "$with_gnu_ld" != yes && break
-       ;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_TAGVAR(hardcode_action, $1)=immediate
+  fi
 else
-  AC_MSG_RESULT(no)
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
 fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
 
 
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
   darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
     else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+      AC_MSG_RESULT([no])
     fi
     ;;
-esac
-])# AC_PROG_LD_RELOAD_FLAG
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
 
 
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+       [], [
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
 
 case $host_os in
-aix4* | aix5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
 
-beos*)
-  lt_cv_deplibs_check_method=pass_all
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-bsdi[[45]]*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
+aix[[4-9]]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
   else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+          echo ' yes '
+          echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+       :
+      else
+       can_build_shared=no
+      fi
       ;;
     esac
-  else
-    lt_cv_deplibs_check_method=pass_all
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
   fi
   ;;
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
+amigaos*)
   case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
     ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
-interix[[3-9]]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
   ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  lt_cv_deplibs_check_method=pass_all
+bsdi[[45]]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
   ;;
 
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-  fi
-  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
 
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
-  ;;
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  fi
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
   ;;
 
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
+freebsd1*)
+  dynamic_linker=no
   ;;
 
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[123]]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
     ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
     ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
     ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
     ;;
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
   ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
 
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-  # These system don't have libm, or don't need it
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
   ;;
-esac
-])# AC_CHECK_LIBM
 
+interix[[3-9]]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!).  If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+       if test "$lt_cv_prog_gnu_ld" = yes; then
+               version_type=linux
+       else
+               version_type=irix
+       fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
   esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
 
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
 
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, lt_dlinit,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
 
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
 
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[  ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+  fi
 
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
 
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-fi
-])# _LT_AC_PROG_CXXCPP
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
 
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
 
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
 
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
-
-
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
-
-
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-        [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-          [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+       shlibpath_overrides_runpath=no
+       ;;
+      *)
+       shlibpath_overrides_runpath=yes
+       ;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
 
-# Source file extension for C test sources.
-ac_ext=c
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
 
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+rdos*)
+  dynamic_linker=no
+  ;;
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
 
-_LT_AC_SYS_COMPILER
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
 
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
 
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
-aix4* | aix5*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+       ;;
+    esac
   fi
-    ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
 
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
-# Source file extension for C++ test sources.
-ac_ext=cpp
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+       case $deplibs_check_method in
+       "file_magic "*)
+         file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+           $EGREP "$file_magic_regex" > /dev/null; then
+           :
+         else
+           cat <<_LT_EOF 1>&2
 
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
 
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
+_LT_EOF
+         fi ;;
+       esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
 else
-  $as_unset lt_cv_path_LD
+  AC_MSG_RESULT(no)
 fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
+_LT_DECL([], [MAGIC_CMD], [0],
+        [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
 
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
 
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
 
-  AC_PROG_LD
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# _LT_PATH_MAGIC
 
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-       grep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
 
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+       [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
 
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+       ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
 else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
+  AC_MSG_CHECKING([for non-GNU ld])
 fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix4* | aix5*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
-       for ld_flag in $LDFLAGS; do
-         case $ld_flag in
-         *-brtl*)
-           aix_use_runtimelinking=yes
-           break
-           ;;
-         esac
-       done
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+       test "$with_gnu_ld" != no && break
+       ;;
+      *)
+       test "$with_gnu_ld" != yes && break
        ;;
       esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
     fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
 
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
 
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
 
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-       collect2name=`${CC} -print-prog-name=collect2`
-       if test -f "$collect2name" && \
-          strings "$collect2name" | grep resolve_lib_name >/dev/null
-       then
-         # We have reworked collect2
-         :
-       else
-         # We have old collect2
-         _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-         # It fails to find uninstalled libraries when the uninstalled
-         # path is not listed in the libpath.  Setting hardcode_minus_L
-         # to unsupported forces relinking
-         _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-         _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-         _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-       fi
-       ;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-       shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then