2017-02-11 |
Clinton Ebadi | note issues with current rev in code master |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-10-19 |
Clinton Ebadi | x-axis: move motor mount away from frame, shrink endsto... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-10-07 |
Clinton Ebadi | x-end idler: better positioning for idler screw, anti... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-10-07 |
Clinton Ebadi | x-end: reposition body strain relief |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-10-07 |
Clinton Ebadi | x-end: rotate nut trap 45 degrees |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-10-07 |
Clinton Ebadi | x-end: increase tolerance for rod holes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-10-02 |
Clinton Ebadi | adapt x-ends to 10mm rods |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-10-02 |
Clinton Ebadi | Reposition lmNuu bearing holder slit |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-02-16 |
Clinton Ebadi | shorten x endstop by 2mm 8mm |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-02-16 |
Clinton Ebadi | Improve mounting hole pattern for x-end nut trap |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2016-01-09 |
Clinton Ebadi | Integrate Wilson II features into x-ends |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-05-19 |
Martin Rice | updates to yends, use with y-tensioner origin/HEAD origin/master |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-05-19 |
Martin Rice | adding y-table and y-tensioner, which replace y bearing... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-05-11 |
Martin Rice | updated marlin configuration.h to latest |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-05-02 |
Martin Rice | added mdf illustration for the Stretch model |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-04-28 |
Martin Rice | added fan duct for ed3-lite6 hotend |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-04-12 |
Martin Rice | update direct drive skethcup model and xcarriage stl... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-02-04 |
Martin Rice | miniscule tweak to x end rod slots, added some new... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-25 |
Martin Rice | Updated extruder to 2-spring ver, added 0.5mm more... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-10 |
Martin Rice | update sketchup model |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-07 |
Martin Rice | added strain relief part by AndrewBCN |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-04 |
Martin Rice | updated docs with new images for updated parts |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-04 |
Martin Rice | tweaked direct drive extruder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-04 |
Martin Rice | added direct drive extruder sketchup model |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-03 |
Martin Rice | added strain relief to z endstop holder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-03 |
Martin Rice | added strain relief to z endstop |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-02 |
Martin Rice | extruder note |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-02 |
Martin Rice | Reorganized and moved lesser common parts into stl... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2015-01-01 |
Martin Rice | sync'd up spreedsheet and TS build bom (txt) and added... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-10-19 |
Martin Rice | revised Z motor holders with tie-down holes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-10-16 |
Martin Rice | added images of mdf bearing locations for reg & stretch... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-10-15 |
Martin Rice | added direct drive extruder body |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-10-11 |
Martin Rice | some scad updates, minor |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-10-11 |
Martin Rice | removed old ramps mount, fixed new ramps mount mesh |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-10-08 |
Martin Rice | added models for Y ends that use 10mm smooth rods inste... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-10-08 |
Martin Rice | updated extruder sketchup models and some minor tweaks |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-10-03 |
Martin Rice | added pushfit beaing holders for y axis, in both origin... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-09-28 |
Martin Rice | added clamp style extruder bodies |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-09-07 |
Martin Rice | added new pushfit x-carriage model (no zip ties, prints... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-08-31 |
Martin Rice | new brackets for full graphics controller |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-08-09 |
Martin Rice | added image of assembled x belt tensioner |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-08-03 |
Martin Rice | numerous tiny fit adjustments, and added my marlin... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-07-28 |
Martin Rice | Updates for better fit |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-07-10 |
Martin Rice | added sketchup model of complete TS |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-07-08 |
Martin Rice | better printability on bearing holder and x carrage |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-07-07 |
Martin Rice | added tensioners for x and y, a few other refinements |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-06-22 |
Martin Rice | some additions to bom, some other sync updates minor... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-06-21 |
Martin Rice | readme explains the most recent stl changes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-06-21 |
Martin Rice | update Y ends, Y belt holder with new tensioner, and... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-06-15 |
Martin Rice | update Z motors |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-06-14 |
Martin Rice | update part photos and added pdf of TS parts |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-06-14 |
Martin Rice | updated bom with some additional information |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-06-09 |
Martin Rice | update to filament holder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-06-07 |
Martin Rice | added new svelt ramps frame mount |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-05-28 |
Martin Rice | update extruder files |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-29 |
Martin Rice | added MCAD for gears; updated bom with fixes; removed... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-26 |
Martin Rice | new three-bearing X carriage |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-14 |
Martin Rice | added motor and idler sketchup model |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-12 |
Martin Rice | moved larger rear bracket to stl/ts |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-12 |
Martin Rice | put back rear frame bracket for RS, the TS version... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-12 |
Martin Rice | formatting |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-12 |
Martin Rice | moved wilson-bom.txt to -rs and added another for ts |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-08 |
Martin Rice | added some detail photos of extruder body |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-07 |
Martin Rice | some new images |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-06 |
Martin Rice | updated readme to reflect extruder changes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-06 |
Martin Rice | updated readme to reflect extruder changes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-06 |
Martin Rice | removed old extruder body and gears |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-04-06 |
Martin Rice | new extruder body and herringbone gears |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-27 |
Martin Rice | replaced original rear bracket with the TS version... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-26 |
Martin Rice | added missing rp parts to bom |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-18 |
Martin Rice | update bom with updated rod lengths |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-18 |
Martin Rice | update TS models, minor changes for fit |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-16 |
Martin Rice | added more part visuals |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-14 |
Martin Rice | slight material reduction on zmotors, improved endstop... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-10 |
Martin Rice | updated bom |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-05 |
Martin Rice | added y belt holder for TS |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-04 |
Martin Rice | minor adj to y end idler slot and slight enlargement... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-04 |
Martin Rice | ts support in bom spreedsheet, few other additions |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-03 |
Martin Rice | better 624 belt guide version |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-03 |
Martin Rice | minor adj to yend slots |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-03 |
Martin Rice | added svelt rear bracket option for TS |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | brace |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | some new images, added ts frame brace scad |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | good beaing holder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | adding sgraber frame brace, update bearing holder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | minor adj to y ends |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | cleanup |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | update z mounts, better z axis range |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | moving rs y ends to stl/rs |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-03-02 |
Martin Rice | adding TS y ends |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-27 |
Martin Rice | fixed dimension error on previous version |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-26 |
Martin Rice | ramps mount moved 4mm away from x motor |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-26 |
Martin Rice | z rod inserts widened .15mm, were too tight |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-26 |
Martin Rice | update ramps holder, y end idler scad fix |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-26 |
Martin Rice | upgraded Y braces for strength, M5x10mm for same |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-24 |
Martin Rice | concept |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-24 |
Martin Rice | added conceptual no-m10 image |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-23 |
Martin Rice | more images |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-22 |
Martin Rice | new RP part images, updated 624 guide |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2014-02-22 |
Martin Rice | add default bom in plaintext |
commit | commitdiff | tree | snapshot (tar.gz zip) |
next |