-#!/bin/sh
+#!/bin/bash
# Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
-# Copyright (c) 2003-2004 Jesus Climent <jesus.climent@hispalinux.es>
+# Copyright (c) 2003-2006 Jesus Climent <jesus.climent@hispalinux.es>
# This code is hereby licensed for public consumption under either the
# GNU GPL v2 or greater, or Larry Wall's Artistic license - your choice.
#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
+#
+# $Id$
-VERSION="2.1pre2.2.0"
+VERSION='2.5.2'
usage ()
{
echo "This is abcde v$VERSION."
echo "Usage: abcde [options] [tracks]"
echo "Options:"
-echo "-1 Encode the whole CD in a single file"
-echo "-a Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
-echo "-A Experimental actions (retag, transcode)"
-echo "-b Batch mode: enable album normalization and nogap encoding"
-echo "-c Specify a configuration file (overrides system and user config files)"
-echo "-C Specify discid to resume from (only needed if you no longer have the cd)"
-echo "-d Specify CDROM device to grab"
-echo "-D Debugging mode (equivalent to sh -x abcde)"
-echo "-f Force the use of a local CDDB entry. Use an empty template if not found"
-echo "-h This help information"
+echo "-1 Encode the whole CD in a single file"
+echo "-a <action1[,action2]...>"
+echo " Actions to perform:"
+echo " cddb,read,normalize,encode,tag,move,replaygain,playlist,clean"
+#echo "-A Experimental actions (retag, transcode)"
+echo "-b Enable batch normalization"
+#echo "-B Disable batch replaygain (do file by file)"
+echo "-c <file>"
+echo " Specify a configuration file (overrides system and user config files)"
+echo "-C <discid#>"
+echo " Specify discid to resume from (only needed if you no longer have the cd)"
+echo "-d <device>"
+echo " Specify CDROM device to grab (flac uses a single-track flac file)"
+echo "-D Debugging mode (equivalent to sh -x abcde)"
+echo "-e Erase encoded track information from status file"
+echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
+echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
+echo "-h This help information"
#echo "-i Tag files while encoding, when possible (local only) -NWY-"
-echo "-j Number of encoder processes to run at once"
-echo "-k Keep the wav tracks for later use"
-echo "-l Use low disk space algorithm"
-echo "-L Use local CDDB storage directory"
-echo "-n No lookup. Don't query CDDB, just create and use template"
-echo "-N Noninteractive. Never prompt for anything"
-echo "-m Modify playlist to include CRLF endings, to comply with some players"
-echo "-o Output file type(s) (ogg,mp3,flac,spx,mpc). Defaults to ogg"
-echo "-p Pad track numbers with 0's (if less than 10 tracks)"
-echo "-r [host1,host2...] Also encode on these remote hosts"
-echo "-R Add replaygain values to the tag info (ogg,flac)"
-echo "-s Start the track numbering at a given number"
-echo "-S Set the CD speed"
-#echo "-t File types to preprocess (wav)"
-#echo "-T Set postprocessing options"
-echo "-v Show version number and exit"
-echo "-V Be a bit more verbose about what is happening behind the scenes"
-echo "-x Eject CD after all tracks are read"
+echo "-j <#> Number of encoder processes to run at once (localhost)"
+echo "-k Keep the wav tracks for later use"
+echo "-l Use low disk space algorithm"
+echo "-L Use local CDDB storage directory"
+echo "-n No lookup. Don't query CDDB, just create and use template"
+echo "-N Noninteractive. Never prompt for anything"
+echo "-m Modify playlist to include CRLF endings, to comply with some players"
+#echo " WARNING: Deprecated. Use \"cue\" action"
+#echo "-M Create a CUE file"
+echo "-o <type1[,type2]...>"
+echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav,m4a). Defaults to vorbis"
+echo "-p Pad track numbers with 0's (if less than 10 tracks)"
+echo "-P Use UNIX pipes to read+encode without wav files"
+echo "-q <level>"
+echo " Set quality level (high,medium,low)"
+echo "-r <host1[,host2]...>"
+echo " Also encode on these remote hosts"
+echo "-R Use local CDDB in recursive mode"
+echo "-s <field>"
+echo " Show fields from the CDDB info (year,genre)"
+echo "-S <#> Set the CD speed"
+echo "-t <#> Start the track numbering at a given number"
+echo "-T <#> Same as -t but modifies tag numbering"
+echo "-U Do NOT use UNICODE (UTF8) tags and comments"
+echo "-v Show version number and exit"
+echo "-V Be a bit more verbose about what is happening behind the scenes"
+echo "-x Eject CD after all tracks are read"
+echo "-w <comment>"
+echo " Add a comment to the CD tracks"
+echo "-W <#> Concatenate CDs: -T #01 -w \"CD #\""
+echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
+echo ""
echo "Tracks is a space-delimited list of tracks to grab."
-echo "Ranges specified with hyphens are allowed."
+echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
+echo ""
+#echo "Double hyphens are used to concatenate tracks"
+}
+
+addstatus ()
+{
+ echo "$@" >> "$ABCDETEMPDIR/status"
+}
+
+# log [level] [message]
+#
+# log outputs the right message in a common format
+log ()
+{
+ BLURB="$1"
+ shift
+ case $BLURB in
+ error) echo "[ERROR] abcde: $@" >&2 ;;
+ warning) echo "[WARNING] $@" >&2 ;;
+ info) echo "[INFO] $@" ;;
+ esac
}
# Funtions to replace the need of seq, which is too distribution dependant.
f_seq_line ()
{
i=$1
- while [ $i -ne `expr $2 + 1` ]
- do
- printf $i" "
- i=`expr $i + 1`
+ if echo $i | grep "[[:digit:]]" > /dev/null 2>&1 ; then
+ while [ $i -ne `expr $2 + 1` ]
+ do
+ printf $i" "
+ i=`expr $i + 1`
+ done
+ echo
+ else
+ log error "syntax error while processing track numbers ($i)"
+ exit 1
+ fi
+}
+
+# Functions to replace the need of awk {print $1} and {print $NF}
+get_first()
+{
+if [ X"$1" = "X" ]; then
+ for first in `cat`; do
+ break
done
- echo
+else
+ first=$1
+fi
+echo $first
+}
+
+get_last()
+{
+if [ X"$1" = "X" ]; then
+ for stdin in `cat`; do
+ last=$stdin
+ done
+else
+ for last in $@ ; do :; done
+fi
+echo $last
}
# checkstatus [blurb]
{
# Take the last line in the status file if there's multiple matches
PATTERN="^$1(=.*)?$"
- BLURB=$(egrep $PATTERN "$ABCDETEMPDIR/status" | tail -n 1)
+ BLURB=$(grep -E $PATTERN "$ABCDETEMPDIR/status" | tail -n 1)
if [ -z "$BLURB" ]; then
# No matches found
fi
}
+# checkwarnings [blurb]
+# Returns "0" if the blurb was found (meaning there was an warning),
+# returns 1 if it wasn't (yes this is a little backwards).
+# Does not print the blurb on stdout.
+# Otherwise, returns "".
+checkwarnings ()
+{
+ if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
+ return 1
+ fi
+ # Take the last line in the status file if there's multiple matches
+ PATTERN="^$1(:.*)?$"
+ BLURB="$(grep -E $PATTERN "$ABCDETEMPDIR/warnings" | tail -n 1)"
+
+ if [ -z "$BLURB" ]; then
+ # negative, we did not have a negative...
+ return 1
+ else
+ # affirmative, we had a negative...
+ return 0
+ fi
+}
+
# checkerrors [blurb]
# Returns "0" if the blurb was found (meaning there was an error),
# returns 1 if it wasn't (yes this is a little backwards).
fi
# Take the last line in the status file if there's multiple matches
PATTERN="^$1(:.*)?$"
- BLURB="$(egrep $PATTERN $ABCDETEMPDIR/errors | tail -n 1)"
+ BLURB="$(grep -E $PATTERN "$ABCDETEMPDIR/errors" | tail -n 1)"
if [ -z "$BLURB" ]; then
# negative, we did not have a negative...
fi
}
+# page [file]
+# Finds the right pager in the system to display a file
+page ()
+{
+ PAGEFILE="$1"
+ # Use the debian sensible-pager wrapper to pick the pager
+ # user has requested via their $PAGER environment variable
+ if [ -x "/usr/bin/sensible-pager" ]; then
+ /usr/bin/sensible-pager "$PAGEFILE"
+ elif [ -x "$PAGER" ]; then
+ # That failed, try to load the preferred editor, starting
+ # with their PAGER variable
+ $PAGER "$PAGEFILE"
+ # If that fails, check for less
+ elif [ -x /usr/bin/less ]; then
+ /usr/bin/less -f "$PAGEFILE"
+ # more should be on all UNIX systems
+ elif [ -x /bin/more ]; then
+ /bin/more "$PAGEFILE"
+ else
+ # No bananas, just cat the thing
+ cat "$PAGEFILE" >&2
+ fi
+}
+
# run_command [blurb] [command...]
# Runs a command, silently if necessary, and updates the status file
run_command ()
{
+ vvecho "$@"
BLURB="$1"
shift
# See if this is supposed to be silent
fi
fi
case "$1" in
- normalize)
+ normalize|normalize-audio)
if [ "$RETURN" = "2" ]; then
# File was already normalized.
RETURN=0
FR="$(echo "$FR" | cut -d/ -f2-)"
TO="../$TO"
done
+ ;;
esac
echo $TO
}
+new_checkexec ()
+{
+ if [ ! "$@" = "" ]; then
+ # Cut off any command-line option we added in
+ X=$(echo $@ | cut -d' ' -f2)
+ if [ "$(which $X)" = "" ]; then
+ return 1
+ elif [ ! -x $(which $X) ]; then
+ return 2
+ fi
+ fi
+ return 0
+}
+
+checkexec ()
+{
+ if [ ! "$@" = "" ]; then
+ # Cut off any command-line option we added in
+ X=$(echo $@ | cut -d' ' -f2)
+ # Test for built-in abcde.function
+ [ "$X" != "${X#abcde.}" ] && type $X >/dev/null 2>&1 && return
+ if [ "$(which $X)" = "" ]; then
+ log error "$X is not in your path." >&2
+ log info "Define the full path to the executable if it exists on your system." >&2
+ if [ -e /etc/debian_release ] ; then
+ case $X in
+ oggenc) MISSING_PACKAGE=vorbis-tools ;;
+ lame|flac) MISSING_PACKAGE=$X ;;
+ esac
+ log info "Hint: apt-get install $MISSING_PACKAGE" >&2
+ fi
+ exit 1
+ elif [ ! -x "$(which $X)" ]; then
+ log error "$X is not executable." >&2
+ exit 1
+ fi
+ fi
+}
+
+# diffentries <filename> <max_value> <entry1>,<entry2>
+# max_value: the range of entries goes from 1 to <max_value>
+diffentries ()
+{
+ FILENAME=$1
+ shift
+ local CDDBDIFFCHOICES=$1
+ shift
+ local CDDBDIFFCHOICE="$@"
+ if [ ! X"$DIFF" = "X" ]; then
+ PARSECHOICE1=$(echo $CDDBDIFFCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
+ PARSECHOICE2=$(echo $CDDBDIFFCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
+ if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBDIFFCHOICES ] || \
+ [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBDIFFCHOICES ] || \
+ [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
+ echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBDIFFCHOICES" >&2
+ else
+ # We parse the 2 choices to diff, store them in temporary files and diff them.
+ for PARSECHOICE in $(echo $CDDBDIFFCHOICE | tr , \ ); do
+ do_cddbparse "$ABCDETEMPDIR/$FILENAME.$PARSECHOICE" > "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE"
+ done
+ echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/$FILENAME.diff"
+ $DIFF $DIFFOPTS "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/$FILENAME.diff"
+ if [ $(cat "$ABCDETEMPDIR/$FILENAME.diff" | wc -l) -ge 24 ]; then
+ page "$ABCDETEMPDIR/$FILENAME.diff"
+ else
+ cat "$ABCDETEMPDIR/$FILENAME.diff" >&2
+ fi
+ fi
+ else
+ echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBDIFFCHOICES." >&2
+ fi
+}
+
+# getcddbinfo
+# Finds an specific field from cddbinfo
+getcddbinfo()
+{
+ case $1 in
+ TRACKNAME1)
+ TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
+ ;;
+ TRACKNAME)
+ TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
+ ;;
+ TRACK-INFO)
+ grep ^EXTT$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\\n/\n/g'
+ ;;
+ esac
+}
+
+# gettracknum
+# Get the track number we are going to use for different actions
+gettracknum()
+{
+ if [ -n "$STARTTRACKNUMBER" ] ; then
+ # Get the trackpadding from the current track
+ CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
+ TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
+ else
+ TRACKNUM=${UTRACKNUM}
+ fi
+}
+
+# makeids
+#
+# Calculate cddb disc ids without requiring specialized helper programs.
+# largely copied from cd-discid and musicbrainz examples. some of the steps
+# don't make sense, but they're necessary to match the ids generated by other
+# programs.
+#
+## FIXME ## Right now, we get 2 frames more than with cue2discid ??
+# data@petit:~$ sh /tmp/cue2discid /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac
+# processing offsetimes 00:00:00 04:47:10 08:20:37 11:46:46 17:45:36 21:41:57 27:32:21 32:03:73 35:39:28 38:27:33 43:50:38 44:42:34
+# 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2895
+# data@petit:~$ metaflac --export-cuesheet-to=- /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac| python /home/data/sources/abcde/trunk/examples/cue2discid
+# 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2893
+#
+# Variables: OFFSETS, TRACKS, LEADOUT, [LEADIN]
+makeids ()
+{
+ if [ X"$LEADOUT" = "X" ]; then
+ log warning "Error trying to calculate disc ids without lead-out information."
+ exit 1
+ fi
+
+ # default to a two second lead-in
+ IDMAGICNUM=150
+ LEADIN=${LEADIN:=150}
+
+ # number of cdframes per second
+ CDFRAMES=75
+
+ # reset cddb checksum for cddb disc-id calululation
+ CDDBCKSUM=0
+
+ COOKEDOFFSETS=""
+ for OFFSET in $(echo $OFFSETS)
+ do
+ COOKEDOFFSETS="${COOKEDOFFSETS} $(($OFFSET + $LEADIN))"
+
+ OFFSETTIME=$(( ($OFFSET + $LEADIN) / $CDFRAMES ))
+ while [ $OFFSETTIME -gt 0 ]; do
+ CDDBCKSUM=$(($CDDBCKSUM + $OFFSETTIME % 10))
+ OFFSETTIME=$(($OFFSETTIME / 10))
+ done
+
+ done
+
+ COOKEDOFFSETS="${COOKEDOFFSETS:1}" # eat the leading space
+
+ PREGAP=$(($(echo $OFFSETS | cut -f1 -d' ')))
+ TOTALTIME=$(( (($LEADOUT + $LEADIN + $PREGAP) / $CDFRAMES) - (($LEADIN + $PREGAP) / $CDFRAMES)))
+
+ case "$CDDBMETHOD" in
+ cddb)
+ printf -v DISCID "%08lx" $(( ($CDDBCKSUM % 0xff) << 24 | $TOTALTIME << 8 | $TRACKS))
+ ;;
+ musicbrainz)
+ # FIXME: don't assume the first track is 1
+ echo "dasd: 1 $TRACKS $LEADIN $LEADOUT $OFFSETS "
+ DISCID=$($MUSICBRAINZ --command calcid --discinfo 1 $TRACKS $LEADIN $LEADOUT $OFFSETS)
+ ;;
+ esac
+
+ TRACKINFO="${DISCID} $((TRACKS)) ${COOKEDOFFSETS} $((($LEADOUT + $LEADIN + $IDMAGICNUM) / $CDFRAMES))"
+}
+
+do_replaygain()
+{
+ if checkstatus replaygain; then :; else
+ run_command "" echo "Adding replaygain information..."
+ for TMPOUTPUT in $( echo $OUTPUTTYPE | tr , \ )
+ do
+ case $TMPOUTPUT in
+ vorbis|ogg)
+ OUTPUT=$OGGOUTPUTCONTAINER
+ ;;
+ flac)
+ OUTPUT=$FLACOUTPUTCONTAINER
+ ;;
+ *)
+ OUTPUT=$TMPOUTPUT
+ ;;
+ esac
+ OUTPUTFILES=""
+ REPLAYINDEX=0
+ for UTRACKNUM in $TRACKQUEUE
+ do
+ CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
+ getcddbinfo TRACKNAME
+ splitvarious
+ TRACKFILE="$(mungefilename "$TRACKNAME")"
+ ARTISTFILE="$(mungefilename "$TRACKARTIST")"
+ ALBUMFILE="$(mungefilename "$DALBUM")"
+ GENRE="$(mungegenre "$GENRE")"
+ YEAR=${CDYEAR:-$CDYEAR}
+ gettracknum
+ if [ "$ONETRACK" = "y" ]; then
+ if [ "$VARIOUSARTISTS" = "y" ]; then
+ OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
+ else
+ OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
+ fi
+ else
+ if [ "$VARIOUSARTISTS" = "y" ]; then
+ OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
+ else
+ OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
+ fi
+ fi
+ OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
+ (( REPLAYINDEX = $REPLAYINDEX + 1 ))
+ done
+ case "$OUTPUT" in
+ flac)
+ run_command replaygain-flac nice $ENCNICE $METAFLAC $FLACGAINOPTS "${OUTPUTFILES[@]}"
+ #run_command replaygain-flac true
+ ;;
+ vorbis|ogg)
+ run_command replaygain-vorbis nice $ENCNICE $VORBISGAIN $VORBISGAINOPTS "${OUTPUTFILES[@]}"
+ ;;
+ mp3)
+ run_command replaygain-mp3 nice $ENCNICE $MP3GAIN $MP3GAINOPTS "${OUTPUTFILES[@]}"
+ ;;
+ mpc)
+ run_command replaygain-mpc nice $ENCNICE $MPPGAIN --auto "${OUTPUTFILES[@]}"
+ ;;
+ *);;
+ esac
+ done
+ if checkerrors "replaygain-.{3,6}"; then :; else
+ run_command replaygain true
+ fi
+ fi
+}
+
# This code splits the a Various Artist track name from one of the following
# forms:
#
if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
case "$VARIOUSARTISTSTYLE" in
forward)
- DTITLEARTIST="$(echo $TRACKNAME | sed 's- / -~-g')"
- TRACKARTIST="$(echo $DTITLEARTIST | cut -f1 -d~)"
- TRACKNAME="$(echo $DTITLEARTIST | cut -f2 -d~)"
+ DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
+ TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
+ TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
;;
forward-dash)
- DTITLEARTIST="$(echo $TRACKNAME | sed 's, - ,~,g')"
- TRACKARTIST="$(echo $DTITLEARTIST | cut -f1 -d~)"
- TRACKNAME="$(echo $DTITLEARTIST | cut -f2 -d~)"
+ DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
+ TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
+ TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
;;
reverse)
- DTITLEARTIST="$(echo $TRACKNAME | sed 's- / -~-g')"
- TRACKARTIST="$(echo $DTITLEARTIST | cut -f2 -d~)"
- TRACKNAME="$(echo $DTITLEARTIST | cut -f1 -d~)"
+ DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
+ TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
+ TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
;;
reverse-dash)
- DTITLEARTIST="$(echo $TRACKNAME | sed 's, - ,~,g')"
- TRACKARTIST="$(echo $DTITLEARTIST | cut -f2 -d~)"
- TRACKNAME="$(echo $DTITLEARTIST | cut -f1 -d~)"
+ DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
+ TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
+ TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
;;
colon)
- DTITLEARTIST="$(echo $TRACKNAME | sed 's-: -~-g')"
- TRACKARTIST="$(echo $DTITLEARTIST | cut -f1 -d~)"
- TRACKNAME="$(echo $DTITLEARTIST | cut -f2 -d~)"
+ DTITLEARTIST="$(echo "$TRACKNAME" | sed 's-: -~-g')"
+ TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
+ TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
;;
trailing-paren)
- DTITLEARTIST="$(echo $TRACKNAME | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
- TRACKARTIST="$(echo $DTITLEARTIST | cut -f2 -d~)"
- TRACKNAME="$(echo $DTITLEARTIST | cut -f1 -d~)"
+ DTITLEARTIST="$(echo "$TRACKNAME" | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
+ TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
+ TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
;;
esac
- elif [ "$ONETRACK" = "y" ]; then
+ elif [ "$VARIOUSARTISTS" = "y" ] && [ "$ONETRACK" = "y" ]; then
TRACKARTIST="Various"
else
- TRACKARTIST=$DARTIST
+ TRACKARTIST="$DARTIST"
fi
}
+do_getgenreid () {
+local genre=$(echo "${@}" | tr '[A-Z]' '[a-z]')
+local id=""
+ case ${genre} in
+ "blues") id=0 ;;
+ "classic rock") id=1 ;;
+ "country") id=2 ;;
+ "dance") id=3 ;;
+ "disco") id=4 ;;
+ "funk") id=5 ;;
+ "grunge") id=6 ;;
+ "hip-hop") id=7 ;;
+ "jazz") id=8 ;;
+ "metal") id=9 ;;
+ "new age") id=10 ;;
+ "oldies") id=11 ;;
+ "other") id=12 ;;
+ "pop") id=13 ;;
+ "r&b") id=14 ;;
+ "rap") id=15 ;;
+ "reggae") id=16 ;;
+ "rock") id=17 ;;
+ "techno") id=18 ;;
+ "industrial") id=19 ;;
+ "alternative") id=20 ;;
+ "ska") id=21 ;;
+ "death metal") id=22 ;;
+ "pranks") id=23 ;;
+ "soundtrack") id=24 ;;
+ "euro-techno") id=25 ;;
+ "ambient") id=26 ;;
+ "trip-hop") id=27 ;;
+ "vocal") id=28 ;;
+ "jazz+funk") id=29 ;;
+ "fusion") id=30 ;;
+ "trance") id=31 ;;
+ "classical") id=32 ;;
+ "instrumental") id=33 ;;
+ "acid") id=34 ;;
+ "house") id=35 ;;
+ "game") id=36 ;;
+ "sound clip") id=37 ;;
+ "gospel") id=38 ;;
+ "noise") id=39 ;;
+ "alt. rock") id=40 ;;
+ "bass") id=41 ;;
+ "soul") id=42 ;;
+ "punk") id=43 ;;
+ "space") id=44 ;;
+ "meditative") id=45 ;;
+ "instrum. pop") id=46 ;;
+ "instrum. rock") id=47 ;;
+ "ethnic") id=48 ;;
+ "gothic") id=49 ;;
+ "darkwave") id=50 ;;
+ "techno-indust.") id=51 ;;
+ "electronic") id=52 ;;
+ "pop-folk") id=53 ;;
+ "eurodance") id=54 ;;
+ "dream") id=55 ;;
+ "southern rock") id=56 ;;
+ "comedy") id=57 ;;
+ "cult") id=58 ;;
+ "gangsta") id=59 ;;
+ "top 40") id=60 ;;
+ "christian rap") id=61 ;;
+ "pop/funk"|"pop / funk") id=62 ;;
+ "jungle") id=63 ;;
+ "native american") id=64 ;;
+ "cabaret") id=65 ;;
+ "new wave") id=66 ;;
+ "psychadelic") id=67 ;;
+ "rave") id=68 ;;
+ "showtunes") id=69 ;;
+ "trailer") id=70 ;;
+ "lo-fi") id=71 ;;
+ "tribal") id=72 ;;
+ "acid punk") id=73 ;;
+ "acid jazz") id=74 ;;
+ "polka") id=75 ;;
+ "retro") id=76 ;;
+ "musical") id=77 ;;
+ "rock & roll") id=78 ;;
+ "hard rock") id=79 ;;
+ "folk") id=80 ;;
+ "folk/rock") id=81 ;;
+ "national folk") id=82 ;;
+ "swing") id=83 ;;
+ "fusion") id=84 ;;
+ "bebob") id=85 ;;
+ "latin") id=86 ;;
+ "revival") id=87 ;;
+ "celtic") id=88 ;;
+ "bluegrass") id=89 ;;
+ "avantgarde") id=90 ;;
+ "gothic rock") id=91 ;;
+ "progress. rock") id=92 ;;
+ "psychadel. rock") id=93 ;;
+ "symphonic rock") id=94 ;;
+ "slow rock") id=95 ;;
+ "big band") id=96 ;;
+ "chorus") id=97 ;;
+ "easy listening") id=98 ;;
+ "acoustic") id=99 ;;
+ "humour") id=100 ;;
+ "speech") id=101 ;;
+ "chanson") id=102 ;;
+ "opera") id=103 ;;
+ "chamber music") id=104 ;;
+ "sonata") id=105 ;;
+ "symphony") id=106 ;;
+ "booty bass") id=107 ;;
+ "primus") id=108 ;;
+ "porn groove") id=109 ;;
+ "satire") id=110 ;;
+ "slow jam") id=111 ;;
+ "club") id=112 ;;
+ "tango") id=113 ;;
+ "samba") id=114 ;;
+ "folklore") id=115 ;;
+ "ballad") id=116 ;;
+ "power ballad") id=117 ;;
+ "rhythmic soul") id=118 ;;
+ "freestyle") id=119 ;;
+ "duet") id=120 ;;
+ "punk rock") id=121 ;;
+ "drum solo") id=122 ;;
+ "a capella") id=123 ;;
+ "euro-house") id=124 ;;
+ "dance hall") id=125 ;;
+ "goa") id=126 ;;
+ "drum & bass") id=127 ;;
+ "club-house") id=128 ;;
+ "hardcore") id=129 ;;
+ "terror") id=130 ;;
+ "indie") id=131 ;;
+ "britpop") id=132 ;;
+ "negerpunk") id=133 ;;
+ "polsk punk") id=134 ;;
+ "beat") id=135 ;;
+ "christian gangsta rap") id=136 ;;
+ "heavy metal") id=137 ;;
+ "black metal") id=138 ;;
+ "crossover") id=139 ;;
+ "contemporary christian")id=140 ;;
+ "christian rock") id=141 ;;
+ "merengue") id=142 ;;
+ "salsa") id=143 ;;
+ "thrash metal") id=144 ;;
+ "anime") id=145 ;;
+ "jpop") id=146 ;;
+ "synthpop") id=147 ;;
+ "rock/pop"|"rock / pop") id=148 ;;
+ *) return 1 ;;
+ esac
+echo ${id}
+return 0
+}
+
# do_tag [tracknumber]
# id3 tags a filename
# variables used:
-# TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC,
-# COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE (and temporarily) ID3TAGV
+# TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC, ATOMICPARSLEY
+# COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE
do_tag ()
{
COMMENTOUTPUT="$(eval echo ${COMMENT})"
+ if [ -z "$COMMENTOUTPUT" ]; then
+ COMMENTOUTPUT="$(getcddbinfo TRACK-INFO)"
+ fi
+ if [ "$CDDBMETHOD" = "cddb" ]; then
+ CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
+ fi
run_command '' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
+ # If we want to start the tracks with a given number, we need to modify the
+ # TRACKNUM value before evaluation
+ if [ -n "$STARTTRACKNUMBERTAG" ] ; then
+ gettracknum
+ fi
for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
do
- case "$OUTPUT" in
- mp3)
- # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
- run_command tagtrack-$1 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
- -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" -y "$CDYEAR" \
- -g "$CDGENRE" -T "$1/$TRACKS" "$ABCDETEMPDIR/track$1.$OUTPUT"
- ;;
- ogg)
- case "$OGGENCODERSYNTAX" in
- vorbize|oggenc)
- # vorbiscomment can't do in-place modification, mv the file first
- if [ -f "$ABCDETEMPDIR/track$1.$OUTPUT" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OUTPUT" ]; then
- mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$ABCDETEMPDIR/track$1.uncommented.$OUTPUT"
- fi
- (
- # These are from http://www.xiph.org/ogg/vorbis/doc/v-comment.html
- echo ARTIST=$TRACKARTIST
- echo ALBUM="$DALBUM"
- echo TITLE=$TRACKNAME
- if [ -n "$CDYEAR" ]; then
- echo DATE="$CDYEAR"
- fi
- if [ -n "$CDGENRE" ]; then
- echo GENRE="$CDGENRE"
- fi
- echo TRACKNUMBER=$1
- echo CDDB=$CDDBDISCID
- if [ "$(eval echo ${COMMENT})" != "" ]; then
- case "$COMMENTOUTPUT" in
- *=*) echo "$COMMENTOUTPUT";;
- *) echo COMMENT="$COMMENTOUTPUT";;
- esac
- fi
- ) | run_command tagtrack-$1 $VORBISCOMMENT -w \
- "$ABCDETEMPDIR/track$1.uncommented.$OUTPUT" "$ABCDETEMPDIR/track$1.$OUTPUT"
- # Doublecheck that the commented file was created successfully before wiping the original
- if [ -f "$ABCDETEMPDIR/track$1.$OUTPUT" ]; then
- rm -f "$ABCDETEMPDIR/track$1.uncommented.$OUTPUT"
- else
- mv "$ABCDETEMPDIR/track$1.uncommented.$OUTPUT" "$ABCDETEMPDIR/track$1.$OUTPUT"
- fi
- ;;
+ case "$OUTPUT" in
+ mp3)
+ # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
+ GENREID=$(do_getgenreid "${CDGENRE}")
+ # Set TPE2 in case we have a Various Artists rip.
+ TPE2=""
+ if [ "$VARIOUSARTISTS" = "y" ]; then
+ TPE2="Various"
+ fi
+
+ case "$ID3SYNTAX" in
+ id3);;
+ eyed3)
+ # FIXME # track numbers in mp3 come with 1/10, so we cannot
+ # happily substitute them with $TRACKNUM
+ run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $TAGGER $TAGGEROPTS \
+ --comment=::"$COMMENTOUTPUT" -A "$DALBUM" \
+ -a "$TRACKARTIST" -t "$TRACKNAME" -Y "$CDYEAR" \
+ -G "$GENREID" -n "${TRACKNUM:-$1}" \
+ "${TRACKNUM:+-N $TRACKS}" \
+ "${ENCODING:+--set-encoding=$ENCODING}" \
+ "${TPE2:+--set-user-text-frame=TPE2:$TPE2}" \
+ "$ABCDETEMPDIR/track$1.$OUTPUT"
+ ;;
+ # FIXME # Still not activated...
+ id3ed)
+ run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
+ $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
+ -a "$DALBUM" -n "$TRACKARTIST" -s "$TRACKNAME" \
+ -y "$CDYEAR" -g "$GENREID" -k "${TRACKNUM:-$1}" \
+ "$ABCDETEMPDIR/track$1.$OUTPUT"
+ ;;
+ *)
+ # FIXME # track numbers in mp3 come with 1/10, so we cannot
+ # happily substitute them with $TRACKNUM
+ run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
+ $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
+ -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" \
+ -y "$CDYEAR" -g "$GENREID" \
+ -T "${TRACKNUM:-$1}/$TRACKS" \
+ ${TPE2:+--TPE2 "$TPE2"} \
+ "$ABCDETEMPDIR/track$1.$OUTPUT"
+ ;;
+ esac
+ ;;
+ vorbis|ogg)
+ case "$OGGENCODERSYNTAX" in
+ vorbize|oggenc)
+ # vorbiscomment can't do in-place modification, mv the file first
+ if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" ]; then
+ mv "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
+ fi
+ (
+ # These are from
+ # http://www.xiph.org/ogg/vorbis/doc/v-comment.html
+
+ echo ARTIST="$TRACKARTIST"
+ echo ALBUM="$DALBUM"
+ echo TITLE="$TRACKNAME"
+ if [ -n "$CDYEAR" ]; then
+ echo DATE="$CDYEAR"
+ fi
+ if [ -n "$CDGENRE" ]; then
+ echo GENRE="$CDGENRE"
+ fi
+ echo TRACKNUMBER=${TRACKNUM:-$1}
+ if [ -n "$DISCNUMBER" ]; then
+ echo DISCNUMBER="$DISCNUMBER"
+ fi
+ echo CDDB=$CDDBDISCID
+ if [ "$(eval echo ${COMMENT})" != "" ]; then
+ case "$COMMENTOUTPUT" in
+ *=*) echo "$COMMENTOUTPUT";;
+ *) echo COMMENT="$COMMENTOUTPUT";;
+ esac
+ fi
+ ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
+ $VORBISCOMMENT $VORBISCOMMENTOPTS -w \
+ "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
+ # Doublecheck that the commented file was created
+ # successfully before wiping the original
+ if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" ]; then
+ rm -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
+ else
+ mv "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
+ fi
+ ;;
+ esac
+ ;;
+ flac)
+ (
+ echo ARTIST="$TRACKARTIST"
+ echo ALBUM="$DALBUM"
+ echo TITLE="$TRACKNAME"
+ if [ -n "$CDYEAR" ]; then
+ echo DATE="$CDYEAR"
+ fi
+ if [ -n "$CDGENRE" ]; then
+ echo GENRE="$CDGENRE"
+ fi
+ echo TRACKNUMBER="${TRACKNUM:-$1}"
+ if [ -n "$DISCNUMBER" ]; then
+ echo DISCNUMBER="$DISCNUMBER"
+ fi
+ echo CDDB="$CDDBDISCID"
+ if [ "$(eval echo ${COMMENT})" != "" ]; then
+ case "$COMMENTOUTPUT" in
+ *=*) echo "$COMMENTOUTPUT";;
+ *) echo COMMENT="$COMMENTOUTPUT";;
+ esac
+ fi
+ ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
+ ;;
+ spx)
+ run_command tagtrack-$OUTPUT-$1 true
+ ;;
+ mpc)
+ run_command tagtrack-$OUTPUT-$1 true
+ ;;
+ m4a)
+ # Use a temp-file of our choice. --overWrite seems to
+ # case core dumps with AtomicParsley 0.9.0
+ ATOMICTEMPFILE="$ABCDETEMPDIR/track$1.m4a-atomic"
+
+ VARIOUSBOOL="false"
+ if [ "$VARIOUSARTISTS" = "y" ]; then
+ VARIOUSBOOL="true"
+ fi
+
+ #It has to be command file opts for AtomicParsley
+ run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $ATOMICPARSLEY $ABCDETEMPDIR/track$1.m4a --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --tracknum ${TRACKNUM:-$1} --year "$CDYEAR" --genre "$CDGENRE" --compilation $VARIOUSBOOL --comment "$COMMENTOUTPUT" --output $ATOMICTEMPFILE
+ if [ -f $ATOMICTEMPFILE ]; then
+ mv "$ATOMICTEMPFILE" "$ABCDETEMPDIR/track$1.m4a"
+ fi
+ ;;
+ wav)
+ run_command tagtrack-$OUTPUT-$1 true
+ ;;
esac
- ;;
- flac)
- (
- echo ARTIST="$TRACKARTIST"
- echo ALBUM="$DALBUM"
- echo TITLE="$TRACKNAME"
- if [ -n "$CDYEAR" ]; then
- echo DATE="$CDYEAR"
- fi
- if [ -n "$CDGENRE" ]; then
- echo GENRE="$CDGENRE"
- fi
- echo TRACKNUMBER=$1
- echo CDDB=$CDDBDISCID
- if [ "$(eval echo ${COMMENT})" != "" ]; then
- case "$COMMENTOUTPUT" in
- *=*) echo "$COMMENTOUTPUT";;
- *) echo COMMENT="$COMMENTOUTPUT";;
- esac
- fi
- ) | run_command tagtrack-$1 $METAFLAC --import-vc-from=- --no-utf8-convert "$ABCDETEMPDIR/track$1.$OUTPUT"
- ;;
- spx)
- run_command tagtrack-$1 true
- ;;
- mpc)
- run_command tagtrack-$1 true
- ;;
- esac
done
+ if checkerrors "tagtrack-(.{3,6})-$1"; then :; else
+ run_command tagtrack-$1 true
+ fi
+
}
-# do_batch_encode
+# do_nogap_encode
# variables used:
# OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
-do_batch_encode ()
+do_nogap_encode ()
{
- # The commands here don't go through run_command because they're never supposed to be silenced
- echo "Batch encoding tracks: $TRACKQUEUE"
- OUTPUT=$(echo $OUTPUTTYPE | grep "mp3" )
- case "$OUTPUT" in
- mp3)
- case "$MP3ENCODERSYNTAX" in
- lame)
- (
- cd "$ABCDETEMPDIR"
- TRACKFILES=
- for UTRACKNUM in $TRACKQUEUE
- do
- TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
- done
- nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
- RETURN=$?
- if [ "$RETURN" != "0" ]; then
- echo "batch-encode: $ENCODER returned code $RETURN" >> errors
- else
+ # The commands here don't go through run_command because they're never
+ # supposed to be silenced
+ echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
+ for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
+ do
+ case "$OUTPUT" in
+ mp3)
+ case "$MP3ENCODERSYNTAX" in
+ lame|toolame)
+ (
+ cd "$ABCDETEMPDIR"
+ TRACKFILES=
for UTRACKNUM in $TRACKQUEUE
do
- echo encodetrack-$UTRACKNUM >> status
+ TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
done
- fi
- )
+ nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
+ RETURN=$?
+ if [ "$RETURN" != "0" ]; then
+ echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
+ else
+ for UTRACKNUM in $TRACKQUEUE
+ do
+ run_command encodetrack-$OUTPUT-$UTRACKNUM true
+ #run_command encodetrack-$UTRACKNUM true
+ done
+ fi
+ )
+ ;;
+ esac
;;
esac
- ;;
- esac
- # Other encoders fall through to normal encoding as the tracks
- # have not been entered in the status file.
+ done
+ if checkerrors "nogap-encode"; then :; else
+ if [ ! "$KEEPWAVS" = "y" ] ; then
+ if [ ! "$KEEPWAVS" = "move" ] ; then
+ rm -f "$IN"
+ fi
+ fi
+ fi
+ # Other encoders fall through to normal encoding as the tracks have not
+ # been entered in the status file.
}
# do_encode [tracknumber] [hostname]
# TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
do_encode ()
{
- IN="$ABCDETEMPDIR/track$1.wav"
- # We need IN to proceed.
- if [ -s "$IN" ] ; then
- for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
+ if [ "$USEPIPES" = "y" ]; then
+ case "$OUTPUT" in
+ mp3)
+ TEMPARG="PIPE_$MP3ENCODERSYNTAX"
+ ;;
+ vorbis|ogg)
+ TEMPARG="PIPE_$OGGENCODERSYNTAX"
+ ;;
+ flac)
+ TEMPARG="PIPE_$FLACENCODERSYNTAX"
+ ;;
+ spx)
+ TEMPARG="PIPE_$SPEEXENCODER"
+ ;;
+ mpc)
+ TEMPARG="PIPE_$MPPENCODER"
+ ;;
+ m4a)
+ TEMPARG="PIPE_$MPPENCODER"
+ ;;
+ esac
+ IN="$( eval echo "\$$TEMPARG" )"
+ else
+ IN="$ABCDETEMPDIR/track$1.wav"
+ case "$OUTPUT" in
+ mp3)
+ case "$MP3ENCODERSYNTAX" in
+ # FIXME # check if mp3enc needs -if for pipes
+ # FIXME # I have not been able to find a working mp3enc binary
+ mp3enc)
+ FILEARG="-if $IN"
+ ;;
+ *)
+ FILEARG="$IN"
+ ;;
+ esac
+ ;;
+ *)
+ FILEARG="$IN"
+ ;;
+ esac
+ fi
+ # We need IN to proceed, if we are not using pipes.
+ if [ -s "$IN" -o X"$USEPIPES" = "Xy" ] ; then
+ for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
do
+ case "$TMPOUTPUT" in
+ vorbis|ogg)
+ OUTPUT=$OGGOUTPUTCONTAINER
+ ;;
+ flac)
+ OUTPUT=$FLACOUTPUTCONTAINER
+ ;;
+ *)
+ OUTPUT=$TMPOUTPUT
+ ;;
+ esac
OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
- run_command '' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
+ if [ "$NOGAP" = "y" ] && checkstatus encodetrack-$OUTPUT-$1 ; then
+ continue
+ fi
+ if [ X"$USEPIPES" = "Xy" ]; then
+ RUN_COMMAND=""
+ # We need a way to store the creation of the files when using PIPES
+ RUN_COMMAND_PIPES="run_command encodetrack-$OUTPUT-$1 true"
+ # When pipping it does not make sense to have a higher nice for
+ # reading than for encoding, since it will be hold by the
+ # encoding process. Setting an effective nice, to calm down a
+ # bit the reading process.
+ EFFECTIVE_NICE=$READNICE
+ else
+ run_command '' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
+ RUN_COMMAND="run_command encodetrack-$OUTPUT-$1"
+ EFFECTIVE_NICE=$ENCNICE
+ fi
case "$OUTPUT" in
mp3)
case "$2" in
%local*%)
case "$MP3ENCODERSYNTAX" in
- lame|gogo) run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
- bladeenc) run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
- l3enc|xingmp3enc) run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
- mp3enc) run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
+ lame|toolame|gogo) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
+ bladeenc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
+ l3enc|xingmp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
+ # FIXME # Relates to the previous FIXME since it might need the "-if" removed.
+ mp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
esac
;;
*)
- run_command encodetrack-$OUTPUT-$1 nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
+ $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
;;
esac
;;
- ogg)
+ vorbis|ogg)
case "$2" in
%local*%)
case "$OGGENCODERSYNTAX" in
- vorbize) run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
- oggenc) run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
+ vorbize) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
+ oggenc) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
esac
;;
*)
- run_command encodetrack-$OUTPUT-$1 nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
+ $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
;;
esac
;;
flac)
case "$2" in
- %local*%)
+ %local*%)
case "$FLACENCODERSYNTAX" in
- flac) run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $FLACENCODER $FLACENCODEROPTS -o "$OUT" "$IN" ;;
- esac
- ;;
-
- *)
- echo -n "DISTMP3:"
- echo "$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
- run_command encodetrack-$OUTPUT-$1 nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev/null 2>&1
+ flac) $RUN_COMMAND nice $EFFECTIVE_NICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
+ esac
+ ;;
+ *)
+ vecho -n "DISTMP3:"
+ vecho "$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
+ $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev/null 2>&1
;;
esac
;;
*=*) ;;
*) COMMENT="COMMENT=$COMMENT" ;;
esac
- COMMENT="--comment \"$COMMENT\""
fi
- # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
- if [ ! "$DOTAG" = "y" ]; then
- run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" "$COMMENT" "$IN" "$OUT"
+ # Tag the file at encode time, as it can't be done after encoding.
+ if [ "$DOTAG" = "y" ]; then
+ $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" ${COMMENT:+--comment "$COMMENT"} "$IN" "$OUT"
else
- run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
+ $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
fi
;;
mpc)
# errors, so I have not tried it myself.
## FIXME ## Needs some cleanup to determine if an empty tag sent
## FIXME ## to the encoder ends up empty.
- run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ $RUN_COMMAND nice $EFFECTIVE_NICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ ;;
+ m4a)
+ # Tag the file at encode time, as it can't be done after encoding.
+ if [ "$DOTAG" = "y" ]; then
+ $RUN_COMMAND nice $EFFECTIVE_NICE $AACENCODER $AACENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -o "$OUT" "$IN"
+
+ else
+ $RUN_COMMAND nice $ENCNICE $AACENCODER $AACENCODEROPTS -o "$OUT" "$IN"
+ fi
+ ;;
+ wav)
+ # In case of wav output we need nothing. Just keep the wavs.
;;
esac
+ $RUN_COMMAND_PIPES
done
# Only remove .wav if the encoding succeeded
- if checkerrors "encodetrack-(.{3,4})-$1"; then
- run_command encodetrack-$1 false
- else
+ if checkerrors "encodetrack-(.{3,6})-$1"; then :; else
run_command encodetrack-$1 true
if [ ! "$KEEPWAVS" = "y" ] ; then
- rm -f "$IN"
+ if [ ! "$KEEPWAVS" = "move" ] ; then
+ rm -f "$IN"
+ fi
fi
fi
else
- if [ "$(checkstatus encode-output)" = "loud" ]; then
- echo "HEH! The file we were about to encode disappeared:"
- echo ">> $IN"
- fi
+ run_command "" echo "HEH! The file we were about to encode disappeared:"
+ run_command "" echo ">> $IN"
run_command encodetrack-$1 false
fi
}
# esac
# done
# # Only remove .wav if the encoding succeeded
-# if checkerrors "preprocess-(.{3,4})-$1"; then
+# if checkerrors "preprocess-(.{3,4})-$1"; then
# run_command preprocess-$1 false
# else
# run_command preprocess-$1 true
# run_command postprocess-$OUTPUT-$1 nice $POSTNICE $SPX_POST $IF $OF ;;
# esac
# # Only remove .wav if the encoding succeeded
-# if checkerrors "postprocess-(.{3,4})-$1"; then
+# if checkerrors "postprocess-(.{3,4})-$1"; then
# run_command postprocess-$1 false
# else
# run_command postprocess-$1 true
# done
#}
+# do_single_gain
+# variables used:
+# FIXME #
+do_single_gain ()
+{
+:
+}
+
# do_batch_gain
# variables used:
-# MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS
+# MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
+# FIXME #
do_batch_gain ()
{
# The commands here don't go through run_command because they're never supposed to be silenced
do
MP3FILES="$TRACKFILES track$UTRACKNUM.mp3"
done
- # XXX: Hard-coded batch option!
+ # FIXME # Hard-coded batch option!
$NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
RETURN=$?
if [ "$RETURN" != "0" ]; then
# TRACKNUM, TRACKNAME, TRACKARTIST, DALBUM, OUTPUTFORMAT, CDGENRE, CDYEAR
do_move ()
{
- for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
+ for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
do
+ # For now, set OUTPUT as TMPOUTPUT, and then change it once we have
+ # defined the OUTPUTFILE:
+ OUTPUT="$TMPOUTPUT"
+
# Create ALBUMFILE, ARTISTFILE, TRACKFILE
# Munge filenames as follows:
# ' ' -> '_'
# ''' -> ''
# '?' -> ''
# Eat control characters
- ALBUMFILE=$(mungefilename "$DALBUM")
- ARTISTFILE=$(mungefilename "$TRACKARTIST")
- TRACKFILE=$(mungefilename "$TRACKNAME")
- GENRE=$(mungegenre "$GENRE")
- YEAR=$(echo $CDYEAR)
- # If we want to start the tracks with a given number, we need to modify the
- # TRACKNUM value before evaluation
- if [ -n "$STARTTRACKNUMBER" ] ; then
- # Get the trackpadding from the current track
- CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
- TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
- else
- TRACKNUM=${UTRACKNUM}
- fi
- # Supported variables for OUTPUTFORMAT are GENRE, ALBUMFILE, ARTISTFILE,
- # TRACKFILE, and TRACKNUM.
- if [ "$VARIOUSARTISTS" = "y" ]; then
- OUTPUTFILE=$(eval echo $VAOUTPUTFORMAT)
+ ALBUMFILE="$(mungefilename "$DALBUM")"
+ ARTISTFILE="$(mungefilename "$TRACKARTIST")"
+ TRACKFILE="$(mungefilename "$TRACKNAME")"
+ GENRE="$(mungegenre "$GENRE")"
+ YEAR=${CDYEAR:-$CDYEAR}
+ # If we want to start the tracks with a given number, we need to modify
+ # the TRACKNUM value before evaluation
+ gettracknum
+ # Supported variables for OUTPUTFORMAT are GENRE, YEAR, ALBUMFILE,
+ # ARTISTFILE, TRACKFILE, and TRACKNUM.
+ if [ "$ONETRACK" = "y" ]; then
+ if [ "$VARIOUSARTISTS" = "y" ]; then
+ OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
+ else
+ OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
+ fi
+ else
+ if [ "$VARIOUSARTISTS" = "y" ]; then
+ OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
else
- OUTPUTFILE=$(eval echo $OUTPUTFORMAT)
+ OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
+ fi
+ fi
+ if checkerrors "tagtrack-$OUTPUT-$1"; then :; else
+ # Once we know the specific output was successful, we can change
+ # the OUTPUT to the value containing the container
+ case $TMPOUTPUT in
+ vorbis|ogg)
+ OUTPUT=$OGGOUTPUTCONTAINER
+ ;;
+ flac)
+ OUTPUT=$FLACOUTPUTCONTAINER
+ ;;
+ *)
+ OUTPUT=$TMPOUTPUT
+ ;;
+ esac
+ # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
+ OUTPUTFILEDIR="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
+ case $OUTPUT in
+ wav)
+ if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
+ # FIXME # introduce warnings?
+ :
+ else
+ # mkdir -p shouldn't return an error if the directory already exists
+ mkdir -p "$OUTPUTFILEDIR"
+ run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
+ if checkstatus movetrack-output-$OUTPUT; then :; else
+ run_command movetrack-output-$OUTPUT true
+ fi
+ fi
+ ;;
+ *)
+ # mkdir -p shouldn't return an error if the directory already exists
+ mkdir -p "$OUTPUTFILEDIR"
+ run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
+ if checkstatus movetrack-output-$OUTPUT; then :; else
+ run_command movetrack-output-$OUTPUT true
+ fi
+ ;;
+ esac
+ # Lets move the cue file
+ if CUEFILE=$(checkstatus cuefile) >/dev/null ; then
+ if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
+ if checkstatus movecue-$OUTPUT; then :; else
+ # Silence the Copying output since it overlaps with encoding processes...
+ #run_command '' vecho "Copying cue file to its destination directory..."
+ if checkstatus onetrack >/dev/null ; then
+ case $OUTPUT in
+ wav)
+ if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
+ # We dont have the dir, since it was not created before.
+ :
+ else
+ run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
+ fi
+ ;;
+ # NOTE: Creating a cue file with the 3-char-extension files is to comply with
+ # http://brianvictor.tripod.com/mp3cue.htm#details
+ [a-z0-9][a-z0-9][a-z0-9])
+ run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
+ ;;
+ *)
+ run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT.cue"
+ ;;
+ esac
+ else
+ run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTFILEDIR/$CUEFILE"
+ fi
+ echo movecue-$OUTPUT >> "$ABCDETEMPDIR/status"
+ fi
+ fi
+ fi
fi
- # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
- OUTPUTFILEDIR=$(dirname "$OUTPUTDIR/$OUTPUTFILE")
- # mkdir -p shouldn't return an error if the directory already exists
- mkdir -p "$OUTPUTFILEDIR"
- run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
done
}
# VARIOUSARTISTS, OUTPUTDIR
do_playlist ()
{
- for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
+ for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
do
+ case $TMPOUTPUT in
+ vorbis|ogg)
+ OUTPUT=$OGGOUTPUTCONTAINER
+ ;;
+ flac)
+ OUTPUT=$FLACOUTPUTCONTAINER
+ ;;
+ *)
+ OUTPUT=$TMPOUTPUT
+ ;;
+ esac
# Create a playlist file for the playlist data to go into.
# We used to wipe it out if it existed. Now we request permision if interactive.
for LASTTRACK in $TRACKQUEUE; do :; done
- ALBUMFILE=$(mungefilename "$DALBUM")
- ARTISTFILE=$(mungefilename "$DARTIST")
- GENRE=$(mungegenre "$GENRE")
+ ALBUMFILE="$(mungefilename "$DALBUM")"
+ ARTISTFILE="$(mungefilename "$DARTIST")"
+ GENRE="$(mungegenre "$GENRE")"
+ YEAR=${CDYEAR:-$CDYEAR}
if [ "$VARIOUSARTISTS" = "y" ] ; then
- PLAYLISTFILE=$(eval echo $VAPLAYLISTFORMAT)
+ PLAYLISTFILE="$(eval echo "$VAPLAYLISTFORMAT")"
else
- PLAYLISTFILE=$(eval echo $PLAYLISTFORMAT)
+ PLAYLISTFILE="$(eval echo "$PLAYLISTFORMAT")"
fi
- FINALPLAYLISTDIR=$(dirname "$OUTPUTDIR/$PLAYLISTFILE")
+ FINALPLAYLISTDIR="$(dirname "$OUTPUTDIR/$PLAYLISTFILE")"
mkdir -p "$FINALPLAYLISTDIR"
if [ -s "$OUTPUTDIR/$PLAYLISTFILE" ]; then
- #echo -n "Erase any existing playlist file? [y/n] (y): " >&2
echo -n "Erase, Append to, or Keep the existing playlist file? [e/a/k] (e): " >&2
if [ "$INTERACTIVE" = "y" ]; then
while [ "$DONE" != "y" ]; do
read ERASEPLAYLIST
case $ERASEPLAYLIST in
e|E|a|A|k|K) DONE=y ;;
+ "") ERASEPLAYLIST=e ; DONE=y ;;
*) ;;
esac
done
do
# Shares some code with do_move since the filenames have to match
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d \[:cntrl:\])
+ getcddbinfo TRACKNAME
splitvarious
- TRACKFILE=$(mungefilename "$TRACKNAME")
- ARTISTFILE=$(mungefilename "$TRACKARTIST")
+ TRACKFILE="$(mungefilename "$TRACKNAME")"
+ ARTISTFILE="$(mungefilename "$TRACKARTIST")"
+ ALBUMFILE="$(mungefilename "$DALBUM")"
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- if [ -n $STARTTRACKNUMBER ] ; then
- # Get the trackpadding from the current track
- CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
- TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
- else
- TRACKNUM=${UTRACKNUM}
- fi
+ gettracknum
if [ "$VARIOUSARTISTS" = "y" ]; then
- OUTPUTFILE=$(eval echo $VAOUTPUTFORMAT)
+ OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT\"")"
else
- OUTPUTFILE=$(eval echo $OUTPUTFORMAT)
+ OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT\"")"
fi
if [ "$VARIOUSARTISTS" = "y" ]; then
if [ "$VAPLAYLISTDATAPREFIX" ] ; then
fi
done
fi
- ## this will convert the playlist to have CRLF line-endings, if specified
- ## (some hardware players insist on CRLF endings)
- if [ "$DOSPLAYLIST" = "y" ]; then
- awk '{substr("\r",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
-# mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
- cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" | sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
+ ## this will convert the playlist to have CRLF line-endings, if specified
+ ## (some hardware players insist on CRLF endings)
+ if [ "$DOSPLAYLIST" = "y" ]; then
+ awk '{substr("\r",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
+# mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
+ cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" | sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
+ fi
+ echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
+ done
+}
+
+# abcde.cue2discid
+# This function reads a cuefile on stdin and writes an extended
+# cddb query on stdout. Any PREGAP for track 1 is properly
+# handled, although cue files embedded in FLAC files do not
+# appear to properly store the PREGAP setting. :(
+abcde.cue2discid () {
+
+ cddb_sum () {
+ val=$1
+ ret=0
+ while [ $val -gt 0 ] ; do
+ ret=$(( $ret + ( $val % 10) ))
+ val=$(( $val / 10 ))
+ done
+ echo $ret
+ }
+
+ msf2lba () {
+ OIFS="$IFS"
+ IFS=":"
+ set -- $1
+ IFS="$OIFS"
+ local first second third
+ first=$(expr ${1} + 0 )
+ second=$(expr ${2} + 0 )
+ third=$(expr ${3} + 0 )
+
+ echo $(( ((($first * 60) + $second) * 75) + $third ))
+ }
+
+ OFFSET=150
+ PREGAP=0
+ LEADOUT=0
+ LEADIN=88200
+ i=0
+ N=0
+
+ while read line ; do
+ set -- $line
+ case "$1" in
+ TRACK) i=$(( i + 1 ))
+ ;;
+ INDEX) if [ "$2" -eq 1 ] ; then
+ LBA=$(msf2lba $3)
+ START=$(( $LBA + $PREGAP + $OFFSET ))
+ eval TRACK$i=$START
+ X=$(cddb_sum $(( $START / 75 )) )
+ N=$(( $N + $X ))
+ fi
+ ;;
+ PREGAP) PREGAP=$(msf2lba $2)
+ ;;
+ REM) case "$2" in
+ FLAC__lead-out)
+ LEADOUT=$(( $4 / 588 ))
+ ;;
+ FLAC__lead-in)
+ LEADIN=$(( $3 / 588 ))
+ ;;
+ esac
+ ;;
+ esac
+
+ done
+
+ TRACKS=$i
+ LEADOUT=$(( $LEADOUT + $LEADIN ))
+
+ LENGTH=$(( $LEADOUT/75 - $TRACK1/75 ))
+ DISCID=$(( ( $N % 255 ) * 2**24 | $LENGTH * 2**8 | $TRACKS ))
+ printf "%08x %i" $DISCID $TRACKS
+
+ j=1
+ while [ $j -le $TRACKS ] ; do
+ eval echo -n "\" \$TRACK$j\""
+ j=$((j+1))
+ done
+ echo " $(( $LEADOUT / 75 ))"
+}
+
+# abcde.mkcue
+# abcde.mkcue [--wholedisk]
+# This creates a cuefile directly from the extended discid information
+# The --wholedisk option controls whether we're ripping data from the
+# start of track one or from the start of the disk (usually, but not
+# always the same thing!)
+#
+# Track one leadin/pregap (if any) handeling:
+# --wholedisk specified:
+# TRACK 01 AUDIO
+# INDEX 00 00:00:00
+# INDEX 01 <pregap value>
+# Remaining track index values unchanged from disc TOC
+#
+# --wholedisk not specified
+# TRACK 01 AUDIO
+# PREGAP <pregap value>
+# INDEX 01 00:00:00
+# Remaining track index values offset by <pregap value>
+#
+# Variables used:
+# TRACKINFO
+abcde.mkcue () {
+
+ echomsf () {
+ printf "$1%02i:%02i:%02i\n" $(($2/4500)) $((($2/75)%60)) $(($2%75))
+ }
+
+ local MODE DISCID TRACKS
+ local i OFFSET LBA
+ local CUEWAVFILE
+
+ if [ "$1" = --wholedisc ] ; then
+ MODE=INDEX
+ else
+ MODE=PREGAP
+ fi
+
+ vecho "One track is $ONETRACK"
+ TRACKFILE="$(mungefilename "$TRACKNAME")"
+ ARTISTFILE="$(mungefilename "$TRACKARTIST")"
+ ALBUMFILE="$(mungefilename "$DALBUM")"
+ if [ "$ONETRACK" = "y" ]; then
+ if [ "$VARIOUSARTISTS" = "y" ]; then
+ CUEWAVFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
+ else
+ CUEWAVFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
+ fi
+ vecho "Cue wav file is $CUEWAVFILE"
+ else
+ CUEWAVFILE="dummy.wav"
+ fi
+
+ set -- $TRACKINFO
+
+ DISCID=$1
+ TRACKS=$2
+ shift 2
+
+ echo REM DISCID $DISCID
+ echo FILE \""$CUEWAVEFILE"\" WAVE
+
+ if [ $1 -ne 150 ] && [ $MODE = "PREGAP" ] ; then
+ OFFSET=$1
+ else
+ OFFSET=150
+ fi
+
+ i=1
+ while [ $i -le "$TRACKS" ] ; do
+ LBA=$(( $1 - $OFFSET ))
+ printf " TRACK %02i AUDIO\n" $i
+ if [ $i -eq 1 -a $1 -ne 150 ] ; then
+ if [ $MODE = PREGAP ] ; then
+ echomsf " PREGAP " $(($OFFSET-150))
+ else
+ echo " INDEX 00 00:00:00"
+ fi
fi
- echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
+ echomsf " INDEX 01 " $LBA
+ i=$(($i+1))
+ shift
done
}
#elif [ -z "$DISCID" ]; then
if [ -z "$DISCID" ]; then
vecho -n "Getting CD track info... "
- TRACKINFO=$($CDDISCID $CDROM)
+ # In OSX, unmount the disc before a query
+ if [ "$OSFLAVOUR" = "OSX" ]; then
+ diskutil unmount ${CDROM#/dev/}
+ fi
+ case "$CDROMREADERSYNTAX" in
+ flac)
+ if $METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" > /dev/null 2>&1 ; then
+ case "$CUE2DISCID" in
+ # FIXME # right now we have 2 cue2discid internal
+ # implementations: builtin and abcde.cue2discid. Test
+ # both of them and decide which one we want to use.
+ builtin)
+ #vecho "Using builtin cue2discid implementation..."
+ CUESHEET="$(metaflac $METAFLACOPTS --export-cuesheet-to=- "$CDROM")"
+
+ #TRACKS=$(echo $CUESHEET | grep -E "TRACK \+[[:digit:]]\+ \+AUDIO" |wc -l)
+ #TRACKS=0
+ OFFSETTIMES=( $(echo "$CUESHEET" | sed -n -e's/\ *INDEX 01\ \+//p' ) )
+ TRACKS=${#OFFSETTIMES[@]}
+ unset OFFSETS
+ #echo "processing offsetimes ${OFFSETTIMES[@]}"
+ for OFFSETTIME in ${OFFSETTIMES[@]}; do
+ OFFSETS="$OFFSETS $(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))"
+ #OFFSETS[${#OFFSETS[*]}]=$(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))
+ done
+
+ LEADOUT=$(( $(echo "$CUESHEET" | grep lead-out | get_last) * 75 / 44100 ))
+ LEADIN=$(( $(echo "$CUESHEET" | grep lead-in | get_last) * 75 / 44100 ))
+ makeids
+ ;;
+ *)
+ #vecho "Using external python cue2discid implementation..."
+ TRACKINFO=$($METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" | $CUE2DISCID)
+ ;;
+ esac
+ else
+ log error "the input flac file does not contain a cuesheet."
+ exit 1
+ fi
+ ;;
+# cdparanoia|debug)
+# CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
+# RET=$?
+# if [ ! "$RET" = "0" ];then
+# log warning "something went wrong while querying the CD... Maybe a DATA CD?"
+# fi
+#
+# TRACKS="$(echo "$CDPARANOIAOUTPUT" | grep -E '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
+# CDPARANOIAAUDIOTRACKS="$TRACKS"
+#
+# LEADOUT="$(echo "$CDPARANOIAOUTPUT" | grep -Eo '^TOTAL[[:space:]]+([[:digit:]]+)' | get_last)"
+# OFFSETS="$(echo "$CDPARANOIAOUTPUT" | sed -n -e's/^ .* \([0-9]\+\) \[.*/\1/p')"
+# makeids
+# ;;
+ *)
+ case "$CDDBMETHOD" in
+ cddb) TRACKINFO=$($CDDISCID "$CDROM") ;;
+ musicbrainz) TRACKINFO=$($MUSICBRAINZ --command id --device "$CDROM") ;;
+ esac
+ ;;
+ esac
# Make sure there's a CD in there by checking cd-discid's return code
- if [ "$?" = "1" ]; then
- echo "abcde error: CD could not be read. Perhaps there's no CD in the drive?" >&2
- exit 1
+ if [ ! "$?" = "0" ]; then
+ if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
+ log error "cuesheet information from the flac file could not be read."
+ log error "Perhaps the flac file does not contain a cuesheet?."
+ exit 1
+ else
+ log error "CD could not be read. Perhaps there's no CD in the drive?"
+ exit 1
+ fi
+ fi
+ # In OSX, remount the disc again
+ if [ "$OSFLAVOUR" = "OSX" ]; then
+ diskutil mount ${CDROM#/dev/}
fi
WEHAVEACD=y
+ DISCID=$(echo $TRACKINFO | cut -f1 -d' ')
else
TRACKINFO=$(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
fi
ABCDETEMPDIR="$WAVOUTPUTDIR/abcde.$(echo $TRACKINFO | cut -f1 -d' ')"
if [ -z "$TRACKQUEUE" ]; then
- if [ ! "$STRIPDATATRACKS" = "y" ]; then
+ if [ ! "$STRIPDATATRACKS" = "n" ]; then
case "$CDROMREADERSYNTAX" in
cdparanoia|debug)
if [ "$WEHAVEACD" = "y" ]; then
vecho "Querying the CD for audio tracks..."
- TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr '\n' ' ' )
+ CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
+ RET=$?
+ if [ ! "$RET" = "0" ];then
+ log warning "something went wrong while querying the CD... Maybe a DATA CD?"
+ fi
+ TRACKS="$(echo "$CDPARANOIAOUTPUT" | grep -E '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
- if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
- TRACKS=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
+ # Previous versions of abcde would store the tracks on a file, instead of the status record.
+ if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
+ echo cdparanoia-audio-tracks=$( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
+ rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
+ fi
+ if [ -f "$ABCDETEMPDIR/status" ] && TRACKS=$(checkstatus cdparanoia-audio-tracks); then :; else
TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
fi
fi
else
TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
fi
+ if echo "$TRACKS" | grep "[[:digit:]]" > /dev/null 2>&1 ;then :;else
+ log info "The disc does not contain any tracks. Giving up..."
+ exit 0
+ fi
echo -n "Grabbing entire CD - tracks: "
if [ ! "$PADTRACKS" = "y" ] ; then
TRACKNUMPADDING=$(echo -n $TRACKS | wc -c | tr -d ' ')
while [ "$X" -ne "$TRACKS" ]
do
X=$(printf "%0.${TRACKNUMPADDING}d" $(expr $X + 1))
- TRACKQUEUE=$(echo "$TRACKQUEUE" $X)
+ TRACKQUEUE=$(echo $TRACKQUEUE $X)
done
echo $TRACKQUEUE
else
echo Grabbing tracks: "$TRACKQUEUE"
fi
-# for LASTTRACK in $TRACKQUEUE; do :; done
-
QUEUEDTRACKS=$(echo $TRACKQUEUE | wc -w | tr -d ' ')
# We have the discid, create a temp directory after it to store all the temp
exit 1
fi
echo -n .
- # It's a directory, let's see if it's owned by us
- if [ ! -O "$ABCDETEMPDIR" ]; then
+ # It's a directory, let's see if it's writable by us
+ if [ ! -r "$ABCDETEMPDIR" ] || [ ! -w "$ABCDETEMPDIR" ] || [ ! -x "$ABCDETEMPDIR" ]; then
# Nope, complain and exit
echo >&2
- echo "abcde: directory $ABCDETEMPDIR already exists and is not owned by you." >&2
+ echo "abcde: directory $ABCDETEMPDIR already exists and is not writeable." >&2
echo "Please investigate, remove it, and rerun abcde." >&2
exit 1
fi
if [ ! -f "$ABCDETEMPDIR/discid" ]; then
# Wipe and start fresh
echo "abcde: $ABCDETEMPDIR/discid not found. Abcde must remove and recreate" >&2
- echo -n "this directory to continue. Continue? [y/n] (n)" >&2
+ echo -n "this directory to continue. Continue [y/N]? " >&2
if [ "$INTERACTIVE" = "y" ]; then
read ANSWER
else
exit 1
fi
rm -rf "$ABCDETEMPDIR" || exit 1
- mkdir "$ABCDETEMPDIR"
+ mkdir -p "$ABCDETEMPDIR"
if [ "$?" -gt "0" ]; then
# Directory already exists or could not be created
echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
fi
else
# We are starting from scratch
- mkdir "$ABCDETEMPDIR"
+ mkdir -p "$ABCDETEMPDIR"
if [ "$?" -gt "0" ]; then
# Directory already exists or could not be created
echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
exit 1
fi
cat /dev/null > "$ABCDETEMPDIR/status"
+ # Store the abcde version in the status file.
+ echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
+ fi
+ if [ X"$DOCUE" = "Xy" -a X"$WEHAVEACD" = "Xy" ]; then
+ if checkstatus cuefile > /dev/null 2>&1 ; then :; else
+ CUEFILE=cue-$(echo "$TRACKINFO" | cut -f1 -d' ').txt
+ vecho "Creating cue file..."
+ case $CDROMREADERSYNTAX in
+ flac)
+ if $METAFLAC --export-cuesheet-to=- "$CDROM" > "$ABCDETEMPDIR/$CUEFILE"; then
+ echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
+ else
+ log warning "the input flac file does not contain a cuesheet."
+ fi
+ ;;
+ *)
+ if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
+ echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
+ else
+ log warning "reading the CUE sheet is still considered experimental"
+ log warning "and there was a problem with the CD reading. abcde will continue,"
+ log warning "but consider reporting the problem to the abcde author"
+ fi
+ ;;
+ esac
+ fi
fi
-
# If we got the CDPARANOIA status and it is not recorded, save it now
- ## FIXME ## ! is non-portable
- if [ -n "$CDPARANOIAAUDIOTRACKS" ] && ! checkstatus cdparanoia-audio-tracks; then
- if echo "$CDPARANOIAAUDIOTRACKS" >> "$ABCDETEMPDIR/cdparanoia-audio-tracks"; then
- echo "cdparanoia-audio-tracks" >> "$ABCDETEMPDIR/status"
+ if [ -n "$CDPARANOIAAUDIOTRACKS" ]; then
+ if checkstatus cdparanoia-audio-tracks > /dev/null 2>&1; then :; else
+ echo cdparanoia-audio-tracks=$CDPARANOIAAUDIOTRACKS >> "$ABCDETEMPDIR/status"
fi
fi
# Create the discid file
echo "$TRACKINFO" > "$ABCDETEMPDIR/discid"
+ if checkstatus cddbmethod > /dev/null 2>&1 ; then :; else
+ echo "cddbmethod=$CDDBMETHOD" >> "$ABCDETEMPDIR/status"
+ fi
+}
- # Determine what actions are to be done from $ACTIONS and set the
- # following environment variables for them:
- DOCDDB=n
- DOREAD=n
- DONORMALIZE=n
- DOPREPROCESS=n
- DOENCODE=n
- DOPOSTPROCESS=n
- DOTAG=n
- DOMOVE=n
- DOPLAYLIST=n
- DOCLEAN=n
+# do_cleancue
+# Create a proper CUE file based on the CUE file we created before.
+do_cleancue()
+{
+ if CUEFILE_IN="$ABCDETEMPDIR"/$(checkstatus cuefile); then
+ CUEFILE_OUT=$CUEFILE_IN.out
+ ### FIXME ### checkstatus cddb
+ if [ -e "$CDDBDATA" ]; then
+ vecho "Adding metadata to the cue file..."
+ # FIXME It doesn't preserve spaces! Why?
+ # FIXME parse $track into PERFORMER and TITLE - abcde already has code for this?
+ n=1
+ echo "PERFORMER \"$DARTIST\"" >> "$CUEFILE_OUT"
+ echo "TITLE \"$DALBUM\"" >> "$CUEFILE_OUT"
+ # Set IFS to <newline> to prevent read from swallowing spaces and tabs
+ OIFS="$IFS"
+ IFS='
+'
+ cat "$CUEFILE_IN" | while read line
+ do
+ if echo "$line" | grep "INDEX 01" > /dev/null 2>&1 ; then
+# FIXME # Possible patch: remove the line above, uncomment the 2 lines below.
+# echo "$line" >> "$CUEFILE_OUT"
+# if echo "$line" | grep "^[[:space:]]*TRACK" > /dev/null 2>&1 ; then
+ eval track="\$TRACK$n"
+ n=$(expr $n + 1)
+ echo " TITLE \"$track\"" >> "$CUEFILE_OUT"
+ # When making a single-track rip, put the
+ # actual file name into the file declaration
+ # in the cue file so that it is usable by
+ # music players and the like
+ elif [ "$ONETRACK" = "y" ] &&
+ echo "$line" | grep '^FILE "dummy.wav" WAVE' > /dev/null 2>&1 ; then
- for ACTION in $(echo $ACTIONS | tr , \ )
- do
- case $ACTION in
- cddb) DOCDDB=y;;
- read) DOREAD=y;;
- normalize) DONORMALIZE=y; DOREAD=y;;
- preprocess) DOPREPROCESS=y; DOREAD=y;;
- encode) DOENCODE=y; DOREAD=y;;
- postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
- tag) DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
- move) DOMOVE=y; DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
- playlist) DOCDDB=y; DOPLAYLIST=y;;
- clean) DOCLEAN=y;;
- esac
- done
+ TRACKFILE="$(mungefilename "$TRACKNAME")"
+ ARTISTFILE="$(mungefilename "$TRACKARTIST")"
+ ALBUMFILE="$(mungefilename "$DALBUM")"
+
+ if [ "$VARIOUSARTISTS" = "y" ]; then
+ OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
+ else
+ OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
+ fi
+
+ echo "FILE \"$OUTPUTFILE\" WAVE" >> "$CUEFILE_OUT"
+ continue
+ fi
+# FIXME # If the lines above are uncommented, remove the line below.
+ echo "$line" >> "$CUEFILE_OUT"
+ done
+ IFS="$OIFS"
+ mv "$CUEFILE_OUT" "$CUEFILE_IN"
+ echo "cleancuefile" >> "$ABCDETEMPDIR/status"
+ fi
+ fi
}
# do_cddbparse
vecho "ONETRACK mode selected: displaying only the title of the CD..."
fi
echo "---- $(grep DTITLE "${CDDBPARSEFILE}" | cut '-d=' -f2- | tr -d \\r\\n ) ----"
+ if [ X"$SHOWCDDBYEAR" = "Xy" ]; then
+ PARSEDYEAR=$(grep DYEAR "${CDDBPARSEFILE}" | cut '-d=' -f2-)
+ if [ ! X"$PARSEDYEAR" = "X" ]; then
+ echo "Year: $PARSEDYEAR"
+ fi
+ fi
+ if [ X"$SHOWCDDBGENRE" = "Xy" ]; then
+ PARSEDGENRE=$(grep DGENRE "${CDDBPARSEFILE}" | cut '-d=' -f2-)
+ if [ ! X"$PARSEDGENRE" = "X" ]; then
+ echo "Genre: $PARSEDGENRE"
+ fi
+ fi
if [ ! "$ONETRACK" = "y" ]; then
for TRACK in $(f_seq_row 1 $TRACKS)
do
{
if checkstatus cddb-readcomplete && checkstatus cddb-choice >/dev/null; then :; else
- CDDBLOCALSUCCESS="n"
+ CDDBLOCALSTATUS="notfound"
CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
- CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
USELOCALRESP="y"
+
+ if [ "$CDDBLOCALRECURSIVE" = "y" ]; then
+ CDDBLOCALRESULTS="$(find ${CDDBLOCALDIR} -name "${CDDBDISCID}" -type f 2> /dev/null)"
+ if [ ! "${CDDBLOCALRESULTS}" = "" ]; then
+ if (( $(echo "${CDDBLOCALRESULTS}" | wc -l) == 1 )); then
+ CDDBLOCALFILE="${CDDBLOCALRESULTS}"
+ CDDBLOCALMATCH=single
+ elif (( $(echo "${CDDBLOCALRESULTS}" | wc -l) > 1 )); then
+ CDDBLOCALMATCH=multiple
+ fi
+ else
+ CDDBLOCALMATCH=none
+ fi
+ elif [ "$CDDBLOCALMATCH" = "none" ] && [ -r "${CDDBLOCALDIR}/${CDDBDISCID}" ]; then
+ CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
+ CDDBLOCALMATCH=single
+ else
+ CDDBLOCALMATCH=none
+ fi
# If the user has selected to check a local CDDB repo, we proceed with it
- if [ -r "${CDDBLOCALFILE}" ]; then
- # List out disc title/author and contents
- do_cddbparse "${CDDBLOCALFILE}"
- echo -n "Locally cached CDDB entry found, use it? [y/n] (y): "
- if [ "$INTERACTIVE" = "y" ]; then
- read USELOCALRESP
- while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
- echo -n 'Invalid selection. Please answer "y" or "n": '
- read USELOCALRESP
+ case $CDDBLOCALMATCH in
+ multiple)
+ echo "Processing multiple matching CDDB entries..." > "$ABCDETEMPDIR/cddblocalchoices"
+ X=0
+ echo "$CDDBLOCALRESULTS" | while read RESULT ; do
+ X=$(expr $X + 1)
+ # List out disc title/author and contents
+ CDDBLOCALREAD="$ABCDETEMPDIR/cddblocalread.$X"
+ cat "$RESULT" > "${CDDBLOCALREAD}"
+ {
+ echo -n "#$X: "
+ do_cddbparse "${CDDBLOCALREAD}"
+ echo ""
+ ##FIXME## QUICK HACK !!!!
+ if [ ! "$INTERACTIVE" = "y" ]; then break ; fi
+ } >> "$ABCDETEMPDIR/cddblocalchoices"
done
- [ x"$USELOCALRESP" = "x" ] && USELOCALRESP="y"
- else
- echo "y" >&2
- fi
- if [ "$USELOCALRESP" = "y" ]; then
- #echo "Using local copy of CDDB data"
- cp "${CDDBLOCALFILE}" "$ABCDETEMPDIR/cddbread.1"
- echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
- echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
- do_cddbparse "${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
- echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
- CDDBLOCALSUCCESS="y"
- else
- #echo "Not using local copy of CDDB data"
- CDDBLOCALSUCCESS="n"
- fi
- elif [ "$FORCECDDBUSELOCAL"= "y" ]; then
+ if [ $(cat "$ABCDETEMPDIR/cddblocalchoices" | wc -l) -ge 24 ] && [ "$INTERACTIVE" = "y" ]; then
+ page "$ABCDETEMPDIR/cddblocalchoices"
+ else
+ # It's all going to fit in one page, cat it
+ cat "$ABCDETEMPDIR/cddblocalchoices" >&2
+ fi
+ CDDBLOCALCHOICES=$( echo "$CDDBLOCALRESULTS" | wc -l )
+ # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
+ CDDBLOCALCHOICENUM=-1
+ if [ "$INTERACTIVE" = "y" ]; then
+ while [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; do
+ echo -n "Locally cached CDDB entries found. Which one would you like to use (0 for none)? [0-$CDDBLOCALCHOICES]: " >&2
+ read CDDBLOCALCHOICE
+ [ x"$CDDBLOCALCHOICE" = "x" ] && CDDBLOCALCHOICE="1"
+ # FIXME # Introduce diff's
+ if echo $CDDBLOCALCHOICE | grep -E "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
+ diffentries cddblocalread "$CDDBLOCALCHOICES" "$CDDBLOCALCHOICE"
+ elif echo $CDDBLOCALCHOICE | grep -E "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
+ # Make sure we get a valid choice
+ CDDBLOCALCHOICENUM=$(echo $CDDBLOCALCHOICE | xargs printf %d 2>/dev/null)
+ if [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; then
+ echo "Invalid selection. Please choose a number between 0 and $CDDBLOCALCHOICES." >&2
+ fi
+ fi
+ done
+ else
+ ### FIXME ###
+ #echo "Selected ..."
+ CDDBLOCALRESP=y
+ CDDBLOCALCHOICENUM=1
+ fi
+ if [ ! "$CDDBLOCALCHOICENUM" = "0" ]; then
+ #echo "Using local copy of CDDB data"
+ echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
+ cat "$ABCDETEMPDIR/cddblocalread.$CDDBLOCALCHOICENUM" >> "$ABCDETEMPDIR/cddbread.1"
+ echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
+ echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
+ do_cddbparse "$ABCDETEMPDIR/cddbread.1" > "$ABCDETEMPDIR/cddbchoices"
+ echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
+ CDDBLOCALSTATUS="found"
+ else
+ #echo "Not using local copy of CDDB data"
+ CDDBLOCALSTATUS="notfound"
+ fi
+ ;;
+ single)
+ # List out disc title/author and contents
+ do_cddbparse "${CDDBLOCALFILE}"
+ #if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
+ # echo -n "Embedded cuesheet entry found, use it [Y/n]? " >&2
+ #else
+ echo -n "Locally cached CDDB entry found, use it [Y/n]? " >&2
+ #fi
+ if [ "$INTERACTIVE" = "y" ]; then
+ read USELOCALRESP
+ while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
+ echo -n 'Invalid selection. Please answer "y" or "n": ' >&2
+ read USELOCALRESP
+ done
+ [ x"$USELOCALRESP" = "x" ] && USELOCALRESP="y"
+ else
+ echo "y" >&2
+ fi
+ if [ "$USELOCALRESP" = "y" ]; then
+ #echo "Using local copy of CDDB data"
+ echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
+ cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
+ echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
+ echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
+ do_cddbparse "${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
+ echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
+ CDDBLOCALSTATUS="single"
+ else
+ #echo "Not using local copy of CDDB data"
+ CDDBLOCALSTATUS="notfound"
+ fi
+ ;;
+ none)
+ CDDBLOCALSTATUS="notfound"
+ ;;
+ esac
+ fi
+}
+
+# do_cdtext
+# Try to read CD-Text from the drive using icedax / cdda2wav
+do_cdtext ()
+{
+ if new_checkexec icedax; then
+ CDTEXT_READER=icedax
+ elif new_checkexec cdda2wav; then
+ CDTEXT_READER=cdda2wav
+ else
+ # Didn't find either, bail
+ return 0
+ fi
+
+ if [ "$CDROMID" = "" ]; then
+ CDDA2WAVCDROM="$CDROM"
+ else
+ CDDA2WAVCDROM="$CDROMID"
+ fi
+
+ # Do we have CD-Text on the disc (and can the drive read it?)
+ ${CDTEXT_READER} -J -N -D ${CDDA2WAVCDROM} > $ABCDETEMPDIR/cd-text 2>&1
+ grep -q '^CD-Text: detected' $ABCDETEMPDIR/cd-text
+ ERRORCODE=$?
+ if [ $ERRORCODE -ne 0 ]; then
+ # No CD-Text found, bail
+ return 0
+ fi
+
+ rm -f "$ABCDETEMPDIR/cddbchoices"
+ CDDBCHOICES=1
+ # Make an empty template
+ $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.1"
+ echo -n "Retrieved 1 CD-Text match..." >> "$ABCDETEMPDIR/cddbchoices"
+ echo "done." >> "$ABCDETEMPDIR/cddbchoices"
+ echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
+ echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
+ ATITLE=$(grep -e '^Album title:' ${ABCDETEMPDIR}/cd-text | cut -c14- )
+ echo "200 none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
+ # List out disc title/author and contents
+ echo ---- ${ATITLE} ---- >> "$ABCDETEMPDIR/cddbchoices"
+ for TRACK in $(f_seq_row 1 $TRACKS)
+ do
+ TRACKM1=$(($TRACK - 1))
+ TITLE="$(grep -E ^Track\ +$TRACK: "$ABCDETEMPDIR/cd-text" | tr -d \\r\\n | sed 's~^Track ..: .~~g;'"s~'$~~g")"
+ echo "$TRACK: $TITLE" >> "$ABCDETEMPDIR/cddbchoices"
+ sed -i "s~^TTITLE${TRACKM1}=.*~TTITLE${TRACKM1}=${TITLE}~" $ABCDETEMPDIR/cddbread.1
+ done
+ sed -i "s~^DTITLE=.*~DTITLE=${ATITLE}~" $ABCDETEMPDIR/cddbread.1
+ echo >> "$ABCDETEMPDIR/cddbchoices"
+ echo "cdtext-readcomplete" >> "$ABCDETEMPDIR/status"
+}
+
+# do_musicbrainz
+# Work with the musicbrainz WS API, then transform the results here so
+# they look (very) like the results from CDDB. Maybe not the best way
+# to go, but it Works For Me (TM)
+
+do_musicbrainz ()
+{
+ if checkstatus musicbrainz-readcomplete; then :; else
+ vecho "Obtaining Musicbrainz results..."
+ # If MB is to be used, interpret the query results and read all
+ # the available entries.
+ rm -f "$ABCDETEMPDIR/cddbchoices"
+ CDDBCHOICES=1 # Overridden by multiple matches
+ MBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
+ ${MUSICBRAINZ} --command data --discid "$MBDISCID" --workdir $ABCDETEMPDIR
+
+ # The helper script will write disc matches out to
+ # cddbread.*. Count how many we have
+ NUM_RESPONSES=$(echo ${ABCDETEMPDIR}/cddbread.* | wc -w)
+ if [ "$NUM_RESPONSES" -eq 1 ] ; then
+ # One exact match
+ echo -n "Retrieved 1 Musicbrainz match..." >> "$ABCDETEMPDIR/cddbchoices"
+ echo "done." >> "$ABCDETEMPDIR/cddbchoices"
+ echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
+ echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
+ ATITLE=$(grep -e '^DTITLE=' ${ABCDETEMPDIR}/cddbread.1 | cut -c8- )
+ echo "200 none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
+ # List out disc title/author and contents
+ echo ---- ${ATITLE} ---- >> "$ABCDETEMPDIR/cddbchoices"
+ for TRACK in $(f_seq_row 1 $TRACKS)
+ do
+ echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
+ done
+ echo >> "$ABCDETEMPDIR/cddbchoices"
+ elif [ "$NUM_RESPONSES" -eq 0 ] ; then
+ # No matches. Use the normal cddb template for the user to
+ # fill in
+ echo "No Musicbrainz match." >> "$ABCDETEMPDIR/cddbchoices"
$CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
- echo 998 > "$ABCDETEMPDIR/cddbquery" # Assuming 998 isn't used by CDDB
- echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
- do_cddbparse "${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
+ # List out disc title/author and contents of template
+ echo ---- Unknown Artist / Unknown Album ---- >> "$ABCDETEMPDIR/cddbchoices"
+ UNKNOWNDISK=y
+ for TRACK in $(f_seq_row 1 $TRACKS)
+ do
+ echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
+ done
+ echo >> "$ABCDETEMPDIR/cddbchoices"
+ echo cddb-read-0-complete >> "$ABCDETEMPDIR/status"
echo cddb-choice=0 >> "$ABCDETEMPDIR/status"
- CDDBLOCALSUCCESS="y"
+ echo 503 > "$ABCDETEMPDIR/cddbquery"
else
- CDDBLOCALSUCCESS="n"
+ echo "210 Found exact matches, list follows (until terminating .)" > "$ABCDETEMPDIR/cddbquery"
+ echo "Multiple Musicbrainz matches:" >> "$ABCDETEMPDIR/cddbchoices"
+ for file in $ABCDETEMPDIR/cddbread.*
+ do
+ X=$(echo $file | sed 's/^.*cddbread\.//g')
+ echo cddb-read-$X-complete >> "$ABCDETEMPDIR/status"
+ ATITLE=$(grep -e '^DTITLE=' ${ABCDETEMPDIR}/cddbread.$X | cut -c8- )
+ echo "none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
+ # List out disc title/author and contents
+ echo "#$X: ---- ${ATITLE} ----" >> "$ABCDETEMPDIR/cddbchoices"
+ for TRACK in $(f_seq_row 1 $TRACKS)
+ do
+ echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
+ done
+ echo >> "$ABCDETEMPDIR/cddbchoices"
+ done
+ echo "." >> "$ABCDETEMPDIR/cddbquery"
fi
+ echo "musicbrainz-readcomplete" >> "$ABCDETEMPDIR/status"
fi
}
RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
case "$RESPONSECODE" in
210) # 210 OK, status information follows (until terminating `.')
- rc=0;
+ rc=0
;;
- 501|*) # 501 Illegal CDDB protocol level: <n>.
+ 501) # 501 Illegal CDDB protocol level: <n>.
CDDBPROTO=`expr $CDDBPROTO - 1`
;;
- esac
+ *) # Try a cddb query, since freedb2.org doesn't support the stat or ver commands
+ # FreeDB TESTCD disc-id is used for query
+ $CDDBTOOL query $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST 03015501 1 296 344 > "$ABCDETEMPDIR/cddbstat"
+ RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
+ case "$RESPONSECODE" in
+ 2??) # Server responded, everything seems OK
+ rc=0
+ ;;
+ esac
+ ;;
+ esac
done
if test $rc -eq 1; then
- CDDBAVAIL="n"
+ CDDBAVAIL="n"
fi
fi
echo cddb-statcomplete >> "$ABCDETEMPDIR/status"
if [ "$CDDBAVAIL" = "n" ]; then
ERRORCODE=no_query
echo 503 > "$ABCDETEMPDIR/cddbquery"
- # The default CDDBLOCALSUCCESS is "n"
- # This part will be triggered if the user CDDB repo does not
+ # The default CDDBLOCALSTATUS is "notfound"
+ # This part will be triggered if the user CDDB repo does not
# contain the entry, or if we are not trying to use the repo.
else
vecho "Querying the CDDB server..."
# Multiple exact, (possibly multiple) inexact matches
IN=
if [ "$RESPONSECODE" = "211" ]; then IN=in; fi
- if [ "$(wc -l < $ABCDETEMPDIR/cddbquery | tr -d ' ')" -eq 3 ]; then
+ if [ "$(wc -l < "$ABCDETEMPDIR/cddbquery" | tr -d ' ')" -eq 3 ]; then
echo "One ${IN}exact match:" >> "$ABCDETEMPDIR/cddbchoices"
tail -n +2 "$ABCDETEMPDIR/cddbquery" | head -n 1 >> "$ABCDETEMPDIR/cddbchoices"
- echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
+ echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
else
echo "Multiple ${IN}exact matches:" >> "$ABCDETEMPDIR/cddbchoices"
fi
if [ "$INTERACTIVE" = "y" ]; then
# We should show the CDDB results both when we are not using the local CDDB repo
# or when we are using it but we could not find a proper match
- if [ "$CDDBUSELOCAL" = "y" ] && [ ! "$CDDBLOCALSUCCESS" = "y" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
+ if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
# Display the $ABCDETEMPDIR/cddbchoices file created above
# Pick a pager so that if the tracks overflow the screen the user can still view everything
if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
CHOICE=$(checkstatus cddb-choice)
if [ -n "$CHOICE" ] ; then
case $CDDBCHOICES in
+ -1) if head -1 "$ABCDETEMPDIR/cddbquery" | grep "^$" > /dev/null 2>&1 ; then
+ log error "CDDB query failed!"
+ exit 1
+ else
+ cat "$ABCDETEMPDIR/cddbchoices"
+ fi
+ ;;
1) cat "$ABCDETEMPDIR/cddbchoices" ;;
*)
echo "Selected: #$CHOICE"
else
# The user has a choice to make, display the info in a pager if necessary
if [ $(cat "$ABCDETEMPDIR/cddbchoices" | wc -l) -ge 24 ]; then
- # Use the debian sensible-pager wrapper to pick the pager
- # user has requested via their $PAGER environment variable
- if [ -x "/usr/bin/sensible-pager" ]; then
- /usr/bin/sensible-pager "$ABCDETEMPDIR/cddbchoices"
- elif [ -x "$PAGER" ]; then
- # That failed, try to load the preferred editor, starting
- # with their PAGER variable
- $PAGER "$ABCDETEMPDIR/cddbchoices"
- # If that fails, check for less
- elif [ -x /usr/bin/less ]; then
- /usr/bin/less -f "$ABCDETEMPDIR/cddbchoices"
- # more should be on all UNIX systems
- elif [ -x /bin/more ]; then
- /bin/more "$ABCDETEMPDIR/cddbchoices"
- else
- # No bananas, just cat the thing
- cat "$ABCDETEMPDIR/cddbchoices" >&2
- fi
+ page "$ABCDETEMPDIR/cddbchoices"
else
# It's all going to fit in one page, cat it
cat "$ABCDETEMPDIR/cddbchoices" >&2
fi
+ CDDBCHOICENUM=""
+ # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
+ CDCHOICENUM=-1
# I'll take CDDB read #3 for $400, Alex
- echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
- read CDDBCHOICE
- # Make sure we get a valid choice
- CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
- while [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; do
- echo "Invalid selection. Please choose a number between 1 and $CDDBCHOICES." >&2
- echo -n "Selection [0-$CDDBCHOICES]: " >&2
+ while [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; do
+ echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
read CDDBCHOICE
- CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
+ [ X"$CDDBCHOICE" = "X" ] && CDDBCHOICE=1
+ if echo $CDDBCHOICE | grep -E "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
+ if [ ! X"$DIFF" = "X" ]; then
+ PARSECHOICE1=$(echo $CDDBCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
+ PARSECHOICE2=$(echo $CDDBCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
+ if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
+ [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
+ [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
+ echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBCHOICES" >&2
+ else
+ # We parse the 2 choices to diff, store them in temporary files and diff them.
+ for PARSECHOICE in $(echo $CDDBCHOICE | tr , \ ); do
+ do_cddbparse "$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
+ done
+ echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/cddbread.diff"
+ $DIFF $DIFFOPTS "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/cddbread.diff"
+ if [ $(cat "$ABCDETEMPDIR/cddbread.diff" | wc -l) -ge 24 ]; then
+ page "$ABCDETEMPDIR/cddbread.diff"
+ else
+ cat "$ABCDETEMPDIR/cddbread.diff" >&2
+ fi
+ fi
+ else
+ echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
+ fi
+ elif echo $CDDBCHOICE | grep -E "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
+ # Make sure we get a valid choice
+ CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
+ if [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; then
+ echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
+ fi
+ fi
done
if [ "$CDCHOICENUM" = "0" ]; then
vecho "Creating empty CDDB template..."
UNKNOWNDISK=y
- $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > $ABCDETEMPDIR/cddbread.0
+ $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
else
- echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= $ABCDETEMPDIR/cddbread.$CDCHOICENUM | cut -f2- -d= | tr -d \\r\\n))" >&2
+ echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
do_cddbparse "$ABCDETEMPDIR/cddbread.$CDCHOICENUM"
fi
echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
if [ "$USELOCALRESP" = "y" ]; then :; else
if [ -n "$CHOICE" ] ; then
case $CDDBCHOICES in
- 0)
+ 0)
UNKNOWNDISK=y
echo "Selected template."
;;
# Show the choice if we are not using the locally stored one
# or when the local search failed to find a match.
PREVIOUSCHOICE=$(checkstatus cddb-choice)
- if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSUCCESS" = "n" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
+ if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
#if [ "$PREVIOUSCHOICE" ]; then
cat "$ABCDETEMPDIR/cddbchoices"
#fi
CDCHOICENUM=1
echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
fi
- echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= $ABCDETEMPDIR/cddbread.$CDCHOICENUM | cut -f2- -d= | tr -d \\r\\n))" >&2
+ echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
fi
fi
if [ -x $(which "${EDITOR%%\ *}") ]; then
# That failed, try to load the preferred editor, starting
# with their EDITOR variable
- eval $(echo "$EDITOR") "$CDDBDATA"
+ eval $(echo "$EDITOR") \"$CDDBDATA\"
fi
# If that fails, check for a vi
+ elif which vi >/dev/null 2>&1; then
+ vi "$CDDBDATA"
+ elif [ -x /usr/bin/vim ]; then
+ /usr/bin/vim "$CDDBDATA"
elif [ -x /usr/bin/vi ]; then
/usr/bin/vi "$CDDBDATA"
+ elif [ -x /bin/vi ]; then
+ /bin/vi "$CDDBDATA"
# nano should be on all (modern, i.e., sarge) debian systems
+ elif which nano >/dev/null 2>&1 ; then
+ nano "$CDDBDATA"
elif [ -x /usr/bin/nano ]; then
/usr/bin/nano "$CDDBDATA"
# mg should be on all OpenBSD systems
+ elif which mg >/dev/null 2>&1 ; then
+ mg "$CDDBDATA"
elif [ -x /usr/bin/mg ]; then
/usr/bin/mg "$CDDBDATA"
# bomb out
else
- echo "No editor available. Check your EDITOR environment variable." >&2
+ log warning "no editor available. Check your EDITOR environment variable."
fi
# delete editor backup file if it exists
if [ -w "$CDDBDATA~" ]; then
# Some heuristics first. Look at Disc Title, and if it starts with
# "Various", then we'll assume Various Artists
- if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
+ if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | grep -Eci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
echo "Looks like a Multi-Artist CD" >&2
VARIOUSARTISTS=y
else
- echo -n "Is the CD multi-artist? [y/n] (n): " >&2
+ echo -n "Is the CD multi-artist [y/N]? " >&2
if [ "$INTERACTIVE" = "y" ]; then
read VARIOUSARTISTS
else
# Set a default
DEFAULTSTYLE=1
# Need NUMTRACKS before cddb-tool will return it:
- NUMTRACKS=$(egrep '^TTITLE[0-9]+=' "$CDDBDATA" | wc -l)
+ NUMTRACKS=$(grep -E '^TTITLE[0-9]+=' "$CDDBDATA" | wc -l)
if [ "$(grep -c "^TTITLE.*\/" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
# More than 1/2 tracks contain a "/", so guess forward
DEFAULTSTYLE=1
echo "variousartists=$VARIOUSARTISTS" >> "$ABCDETEMPDIR/status"
echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
- if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
- if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
+ if [ "$EDITCDDB" = "y" ] && [ "$CDDBMETHOD" = "cddb" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
+ if [ "$CDDBDATAMD5SUM" != "" ] && [ "$CDDBDATAMD5SUM" != "$($MD5SUM "$CDDBDATA" | cut -d " " -f 1)" ]; then
# This works but does not have the necessary error checking
# yet. If you are familiar with the CDDB spec
- # (see http://www.freedb.org/src/latest/DBFORMAT)
+ # (see http://www.freedb.org/src/latest/DBFORMAT)
# and can create an error-free entry on your own, then put
# UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE=y in your
# abcde.conf to enable it. Put CDDBSUBMIT=email@address in
# submit the modified file, if they want
if [ "$NOSUBMIT" != "y" ]; then
- echo -n "Do you want to submit this entry to $CDDBSUBMIT? [y/n] (n): "
+ echo -n "Do you want to submit this entry to $CDDBSUBMIT [y/N]? "
read YESNO
while [ "$YESNO" != "y" ] && [ "$YESNO" != "n" ] && [ "$YESNO" != "Y" ] && \
[ "$YESNO" != "N" ] && [ "$YESNO" != "" ]
fi
fi
fi
- # Make sure the cache directory exists
- mkdir -p $CDDBLOCALDIR
+ ### FIXME ###
+ # User CDDBLOCALPOLICY to find out if we store the file or not...
# Cache edited CDDB entry in the user's cddb dir
- if [ "$CDDBCOPYLOCAL" = "y" ] || [ "$COPYCDDBLOCAL" = "Y" ]; then
+ if [ "$CDDBCOPYLOCAL" = "y" ]; then
+ # Make sure the cache directory exists
+ mkdir -p $CDDBLOCALDIR
cat "$CDDBDATA" | tail -n $(expr $(cat "$CDDBDATA" | wc -l ) - 1 ) > ${CDDBLOCALDIR}/$(echo "$TRACKINFO" | cut -d' ' -f1)
fi
echo "cddb-edit" >> "$ABCDETEMPDIR/status"
}
-# do_cdread_one [lasttrack] [firsttrack]
-#
-# Reads the CD in a single track. Live performances, concerts, mixes,... benefit from this.
-do_cdread_one ()
-{
- # The commands here don't go through run_command because they're never supposed to be silenced
- # return codes need to be doublechecked anyway, however
- LASTTRACKNUMBER=$1
- FIRSTTRACKNUMBER=$2
- WAVDATA="$ABCDETEMPDIR/track$FIRSTTRACKNUMBER.wav"
- echo "Grabbing the CD to a single track..." >&2
- case "$CDROMREADERSYNTAX" in
- cdparanoia) nice $READNICE $CDROMREADER -d $CDROM "1-" "$WAVDATA" >&2 ;;
- cdda2wav)
- if [ "$OSFLAVOUR" = "OSX" ] ; then
- # Hei, we have to unmount the device before running anything like cdda2wav in OSX
- disktool -u ${CDROM#/dev/} 0
- # Also, in OSX the cdrom device for cdda2wav changes...
- CDDA2WAVCDROM="IODVDServices"
- elif [ "$OSFLAVOUR" = "FBSD" ] ; then
- CDDA2WAVCDROM="$CDROMID"
- else
- if [ "$CDROMID" = "" ]; then
- CDDA2WAVCDROM="$CDROM"
- else
- CDDA2WAVCDROM="$CDROMID"
- fi
- fi
- nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t 1+$LASTTRACKNUM "$WAVDATA" >&2
- ;;
- dagrab) nice $READNICE $CDROMREADER -d $CDROM -f $WAVDATA -v $UTRACKNUM >&2 ;;
- cddafs)
- # Find the track's mounted path
- REALTRACKNUM=$(expr $UTRACKNUM + 0)
- FILEPATH=$(mount | grep "$CDROM on" | sed 's/^[^ ]* on \(.*\) (.*/\1/')
- FILEPATH=$(find "$FILEPATH" | grep "/$REALTRACKNUM ");
- # If the file exists, copy it
- if [ -e "$FILEPATH" ] ; then
- nice $READNICE $CDROMREADER "$FILEPATH" "$WAVDATA" >&2
- else
- false
- fi ;;
- debug) nice $READNICE $CDROMREADER -d $CDROM -w $UTRACKNUM-[:1] "$WAVDATA" >&2 ;;
- esac
- RETURN=$?
- if [ "$RETURN" != "0" -o ! -s "$WAVDATA" ]; then
- # Thank goodness errors is only machine-parseable up to the
- # first colon, otherwise this woulda sucked
- if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
- RETURN=73 # fake a return code as cdparanoia return 0 also on aborted reads
- fi
- echo "readtrack-$FIRSTTRACKNUMBER: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
- return $RETURN
- else
- echo readtrack-$FIRSTTRACKNUMBER >> "$ABCDETEMPDIR/status"
- fi
-}
-
# do_cdread [tracknumber]
-#
+# do_cdread onetrack [firsttrack] [lasttrack]
+#
do_cdread ()
{
# The commands here don't go through run_command because they're never supposed to be silenced
# return codes need to be doublechecked anyway, however
- UTRACKNUM=$1
+ if [ "$1" = "onetrack" ]; then
+ # FIXME # Add the possibility of grabbing ranges of tracks in onetrack
+ # FIXME # Until then, we grab the whole CD in one track, no matter what
+ # the user said
+ # We need the first and last track for cdda2wav/icedax
+ FIRSTTRACK=$2
+ LASTTRACK=$(expr $3 + 0)
+ UTRACKNUM=$FIRSTTRACK
+ case "$CDROMREADERSYNTAX" in
+ flac) READTRACKNUMS="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
+ cdparanoia)
+ #XX FIXME XX
+ # Add a variable to check if tracks are provided in command line and if not, use "0-" to rip the tracks
+ READTRACKNUMS="$FIRSTTRACK-$LASTTRACK" ;;
+ cdda2wav | icedax) READTRACKNUMS="$FIRSTTRACK+$LASTTRACK" ;;
+ *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
+ exit 1 ;;
+ esac
+ else
+ UTRACKNUM=$1
+ fi
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
- OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
- if [ -r "$CDDBDATA" ]; then
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d \[:cntrl:\])
- echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
+ if [ "$USEPIPES" = "y" ]; then
+ TEMPARG="PIPERIPPER_$CDROMREADERSYNTAX"
+ FILEARG="$( eval echo "\$$TEMPARG" )"
+ REDIR="y"
+ PIPE_MESSAGE="and encoding "
+ else
+ WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
+ case "$CDROMREADERSYNTAX" in
+ ## FIXME ## Find the cases for dagrab and flac, to avoid exceptions
+ flac)
+ FILEARG="--output-name=$WAVDATA"
+ ;;
+ dagrab)
+ FILEARG="-f $WAVDATA"
+ ;;
+ *)
+ FILEARG="$WAVDATA"
+ ;;
+ esac
+ REDIR="n"
+ fi
+ if [ "$1" = "onetrack" ]; then
+ echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
else
- echo "Grabbing track $UTRACKNUM..." >&2
+ if [ -r "$CDDBDATA" ]; then
+ getcddbinfo TRACKNAME
+ echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
+ else
+ echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM..." >&2
+ fi
fi
case "$CDROMREADERSYNTAX" in
- cdparanoia) nice $READNICE $CDROMREADER -d $CDROM $UTRACKNUM "$WAVDATA" >&2 ;;
- cdda2wav)
+ ### FIXME ### use an exception for flac, since it uses -o
+ ### FIXME ### Shall we just use -o $FILEARG ??
+ flac)
+ # Avoid problems wit math expressions by unpadding the given UTRACKNUM
+ STRIPTRACKNUM=$(expr $UTRACKNUM + 0)
+ nice $READNICE $FLAC -d -f --cue=${READTRACKNUMS:-$STRIPTRACKNUM.1-$(($STRIPTRACKNUM + 1)).0} "$FILEARG" "$CDROM" ;;
+ cdparanoia)
+ if [ "$REDIR" = "y" ]; then
+ nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
+ else
+ nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
+ fi;;
+
+ cdda2wav | icedax)
if [ "$OSFLAVOUR" = "OSX" ] ; then
- # Hei, we have to unmount the device before running anything like cdda2wav in OSX
- disktool -u ${CDROM#/dev/} 0
- # Also, in OSX the cdrom device for cdda2wav changes...
+ # Hei, we have to unmount the device before running anything like cdda2wav/icedax in OSX
+ diskutil unmount ${CDROM#/dev/} 0
+ # Also, in OSX the cdrom device for cdda2wav/icedax changes...
CDDA2WAVCDROM="IODVDServices"
elif [ "$OSFLAVOUR" = "FBSD" ] ; then
CDDA2WAVCDROM="$CDROMID"
CDDA2WAVCDROM="$CDROMID"
fi
fi
- nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t $UTRACKNUM "$WAVDATA" >&2
- ;;
- dagrab) nice $READNICE $CDROMREADER -d $CDROM -f $WAVDATA -v $UTRACKNUM >&2 ;;
+ if [ "$REDIR" = "y" ]; then
+ nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
+ else
+ nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
+ fi ;;
+ ## FIXME ## We have an exception for dagrab, since it uses -f
+ ## FIXME ## Shall we just use -f $FILEARG ??
+ dagrab)
+ if [ "$REDIR" = "y" ]; then
+ nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG" >&2
+ else
+ nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG"
+ fi ;;
cddafs)
# Find the track's mounted path
REALTRACKNUM=$(expr $UTRACKNUM + 0)
- FILEPATH=$(mount | grep "$CDROM on" | sed 's/^[^ ]* on \([^(]*\) (.*/\1/')
+ FILEPATH=$(mount | grep "$CDROM on" | sed 's/^[^ ]* on \(.*\) (.*/\1/')
FILEPATH=$(find "$FILEPATH" | grep "/$REALTRACKNUM ");
# If the file exists, copy it
if [ -e "$FILEPATH" ] ; then
- nice $READNICE $CDROMREADER "$FILEPATH" "$WAVDATA" >&2
+ if [ "$REDIR" = "y" ]; then
+ nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG" >&2
+ else
+ nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG"
+ fi
else
false
fi ;;
- debug) nice $READNICE $CDROMREADER -d $CDROM -w $UTRACKNUM-[:1] "$WAVDATA" >&2 ;;
+ debug)
+ if [ "$REDIR" = "y" ]; then
+ nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG" >&2
+ else
+ nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG"
+ fi ;;
esac
RETURN=$?
- if [ "$RETURN" != "0" -o ! -s "$WAVDATA" ]; then
+ # If we get some error or we get some missing wav
+ # (as long as we dont use pipes)
+ if [ "$RETURN" != "0" -o \( ! -s "$WAVDATA" -a X"$USEPIPES" != "Xy" \) ]; then
# Thank goodness errors is only machine-parseable up to the
# first colon, otherwise this woulda sucked
if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
RETURN=73 # fake a return code as cdparanoia return 0 also on aborted reads
fi
- echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
+ if [ "$USEPIPES" = "y" ]; then
+ echo "readencodetrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
+ else
+ echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
+ fi
return $RETURN
else
- echo readtrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
+ if [ "$USEPIPES" = "y" ]; then
+ echo readencodetrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
+ else
+ echo readtrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
+ fi
+ if [ "$1" = "onetrack" ]; then
+ echo onetrack >> "$ABCDETEMPDIR/status"
+ fi
fi
}
# do_cdspeed
# No values accepted, only uses env variables
-do_cdspeed ()
+do_cdspeed ()
{
if "$CDSPEED" "$CDSPEEDOPTS" "$CDSPEEDVALUE" >/dev/null ; then
vecho "Setting CD speed to ${CDSPEEDVALUE}x"
# vecho [message]
#
-# vecho outputs a message if EXTRAVERBOSE is selected
+# vecho outputs a message if EXTRAVERBOSE is 1 or more
vecho ()
{
-if [ x"$EXTRAVERBOSE" != "x" ]; then
- echo $@
+if [ x"$EXTRAVERBOSE" != "x" ] && [ $EXTRAVERBOSE -gt 0 ] ; then
+ case $1 in
+ warning) shift ; log warning "$@" ;;
+ *) echo "$@" ;;
+ esac
+fi
+}
+
+# vvecho [message]
+#
+# vvecho outputs a message if EXTRAVERBOSE is 2 or more
+vvecho ()
+{
+if [ x"$EXTRAVERBOSE" != "x" ] && [ $EXTRAVERBOSE -gt 1 ] ; then
+ case $1 in
+ warning) shift ; log warning "$@" ;;
+ *) echo "$@" ;;
+ esac
+fi
+}
+
+# decho [message]
+#
+# decho outputs a debug message if DEBUG is selected
+decho ()
+{
+if [ x"$DEBUG" != "x" ]; then
+ if echo $1 | grep "^\[" > /dev/null 2>&1 ; then
+ DEBUGECHO=$(echo "$@" | tr -d '[]')
+ echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
+ else
+ echo "[DEBUG] $1"
+ fi
fi
}
+# User-redefinable functions
+# Custom filename munging:
+mungefilename ()
+{
+ #echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
+ echo "$@" | sed s,:,\ -,g | tr \ / __ | tr -d \'\"\?\[:cntrl:\]
+}
+
+# Custom genre munging:
+mungegenre ()
+{
+ echo $CDGENRE | tr "[:upper:]" "[:lower:]"
+}
+
+# pre_read
+# Empty pre_read function, to be defined in the configuration file.
+pre_read ()
+{
+:
+}
+
+# post_read
+# Empty post_read function, to be defined in the configuration file.
+post_read ()
+{
+:
+}
+
+# post_encode
+# Empty post_encode function, to be defined in the configuration file.
+post_encode ()
+{
+:
+}
+
+###############################################################################
+# End of functions
+#
# Start of execution
+###############################################################################
# Builtin defaults
+
+# CDDB
+# Defaults to FreeDB, but musicbrainz can be used too, via the abcde-musicbrainz-tool script
+CDDBMETHOD=cddb
CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
CDDBSUBMIT=freedb-submit@freedb.org
-CDDBPROTO=5
+CDDBPROTO=6
HELLOINFO="$(whoami)@$(hostname)"
+CDDBCOPYLOCAL="n"
+CDDBLOCALPOLICY="always"
+CDDBLOCALRECURSIVE="y"
+CDDBLOCALDIR="$HOME/.cddb"
+CDDBUSELOCAL="n"
+
+# List of fields we parse and show during the CDDB parsing...
+SHOWCDDBFIELDS="year,genre"
+
INTERACTIVE=y
-CDROMREADERSYNTAX=cdparanoia
-OUTPUTTYPE=ogg
+#CDROMREADERSYNTAX=cdparanoia
ENCODERSYNTAX=default
MP3ENCODERSYNTAX=default
FLACENCODERSYNTAX=default
SPEEXENCODERSYNTAX=default
MPPENCODERSYNTAX=default
+AACENCODERSYNTAX=default
NORMALIZERSYNTAX=default
+CUEREADERSYNTAX=default
OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
VARIOUSARTISTSTYLE=forward
KEEPWAVS=n
PADTRACKS=n
-CDDBCOPYLOCAL="n"
-CDDBLOCALDIR="$HOME/.cddb"
-CDDBUSELOCAL="n"
+NOGAP=n
+BATCHNORM=n
+NOCDDBQUERY=n
-# If using scsi devices, cdda2wav needs a CDROMID, instead of a device node
+# If using scsi devices, cdda2wav/icedax needs a CDROMID, instead of a device node
# i.e. CDROMID="1,0,0"
CDROMID=""
+# If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
+# If we are using the ide-scsi emulation layer, we need to define a "g"
+CDPARANOIACDROMBUS="d"
# program paths - defaults to checking your $PATH
# mp3
LAME=lame
+TOOLAME=toolame
GOGO=gogo
BLADEENC=bladeenc
L3ENC=l3enc
SPEEXENC=speexenc
# mpp (Musepack)
MPPENC=mppenc
+# m4a
+AACENC=faac
ID3=id3
ID3V2=id3v2
+EYED3=eyeD3
+VORBISCOMMENT=vorbiscomment
+METAFLAC=metaflac
+AACTAG=faac
+ATOMICPARSLEY=AtomicParsley
+
CDPARANOIA=cdparanoia
-CDDA2WAV=cdda2wav
+CDDA2WAV=icedax
DAGRAB=dagrab
CDDAFS=cp
CDDISCID=cd-discid
CDDBTOOL=cddb-tool
+MUSICBRAINZ=abcde-musicbrainz-tool
EJECT=eject
MD5SUM=md5sum
DISTMP3=distmp3
-VORBISCOMMENT=vorbiscomment
-METAFLAC=metaflac
NORMALIZE=normalize-audio
CDSPEED=eject
VORBISGAIN=vorbisgain
+MP3GAIN=mp3gain
+MPPGAIN=replaygain
+MKCUE=mkcue
+MKTOC=cdrdao
+DIFF=diff
+CUE2DISCID=builtin
# Options for programs called from abcde
# mp3
LAMEOPTS=
+TOOLAMEOPTS=
GOGOOPTS=
BLADEENCOPTS=
L3ENCOPTS=
XINGMP3ENCOPTS=
MP3ENCOPTS=
+MP3GAINOPTS="-a -k"
# ogg
VORBIZEOPTS=
OGGENCOPTS=
+VORBISGAINOPTS="--album"
# flac
FLACOPTS=
+FLACGAINOPTS="--add-replay-gain"
# speex
SPEEXENCOPTS=
# mpc
MPPENCOPTS=
+# m4a
+AACENCOPTS=
ID3OPTS=
ID3V2OPTS=
NORMALIZEOPTS=
CDSPEEDOPTS="-x"
CDSPEEDVALUE=
+MKCUEOPTS=
+MKTOCOPTS=""
+VORBISCOMMENTOPTS="-R"
+METAFLACOPTS="--no-utf8-convert"
+DIFFOPTS=
# Default to one process if -j isn't specified
MAXPROCS=1
# List of actions to perform - by default, run to completion
ACTIONS=cddb,read,encode,tag,move,clean
-# User-redefinable functions
-# Custom filename munging:
-mungefilename ()
-{
- echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
-}
+# This option is basicaly for Debian package dependencies:
+# List of prefered outputs - by default, run with whatever we have in the path
+DEFAULT_OUTPUT_BINARIES=vorbis:oggenc,flac:flac,mp3:toolame,mp3:lame,mp3:bladeenc,spx:speex,m4a:faac
-# Custom genre munging:
-mungegenre ()
-{
- echo $CDGENRE | tr "[:upper:]" "[:lower:]"
-}
+# List of prefered cdromreaders - by default, run whichever we have in the path
+DEFAULT_CDROMREADERS="cdparanoia icedax cdda2wav"
-# pre_read
-# Empty pre_read function, to be defined in the configuration file.
-pre_read ()
-{
-:
-}
+# List of quality levels associated with the encoders:
+DEFAULT_QUALITY_XLO="oggenc:-q -1,lame:-q 9,speex:--quality 1,m4a:"
+DEFAULT_QUALITY_LO="oggenc:-q 1,lame:-q 7,speex:--quality 5,m4a:"
+DEFAULT_QUALITY_HI="oggenc:-q 7,lame:--preset standard,speex:--quality 9,m4a:"
+DEFAULT_QUALITY_XHI="oggenc:-q 10,lame:--preset extreme,speex:--quality 10,m4a:"
-# Asume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for Linux/OpenBSD/NetBSD.
-# Let's use these checkings to determine the OS flavour, which will be used later
+# Asume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for
+# Linux/OpenBSD. ftp is user for NetBSD.
+# Let's use these checkings to determine the OS flavour, which will be used
+# later
if [ X$(uname) = "XFreeBSD" ] ; then
HTTPGET=fetch
+ MD5SUM=md5
NEEDCDROMID=y
OSFLAVOUR=FBSD
elif [ X$(uname) = "XDarwin" ] ; then
HTTPGET=curl
OSFLAVOUR=OSX
- # We should have disktool in OSX, but let's be sure...
- NEEDDISKTOOL=y
+ # We should have diskutil in OSX, but let's be sure...
+ NEEDDISKUTIL=y
+ CDROMREADERSYNTAX=cddafs
elif [ X$(uname) = "XOpenBSD" ] ; then
HTTPGET=wget
MD5SUM=md5
+ OSFLAVOUR=OBSD
+elif [ X$(uname) = "XNetBSD" ] ; then
+ HTTPGET=ftp
+ MD5SUM=md5
+ OSFLAVOUR=NBSD
+elif [ X$(uname) = "SunOS" ] ; then
+ HTTPGET=""
+ MD5SUM=md5
+ OSFLAVOUR=SunOS
else
HTTPGET=wget
fi
# If USEID3 is set to n, no ID3 tagging is done
CDDBAVAIL=y
USEID3=y
+USEID3V2=y
+
+# There we go..
+# But before we get into business, let us chop off any GREP environmental
+# variables.
+GREP_OPTIONS=""
+GREP_COLOR=""
if [ -z "$OUTPUTDIR" ]; then
OUTPUTDIR=$(pwd)
fi
# By this time, we need some HTTPGETOPTS already defined.
-# If the user has defined its own, we should not be empty.
+# If the user has defined a non-default HTTPGET method, we should not be empty.
if [ "$HTTPGETOPTS" = "" ] ; then
case $HTTPGET in
- wget) HTTPGETOPTS="-q -O -";;
+ wget) HTTPGETOPTS="-q -nv -e timestamping=off -O -";;
curl) HTTPGETOPTS="-f -s";;
fetch)HTTPGETOPTS="-q -o -";;
- *) echo "abcde warning: HTTPGET in non-standard and HTTPGETOPTS are not defined." >&2 ;;
+ ftp) HTTPGETOPTS="-a -V -o - ";;
+ *) log warning "HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
esac
fi
CDROM=/dev/cdroms/cdrom0
elif [ -e /dev/cdrom ]; then
CDROM=/dev/cdrom
+ elif [ -e /dev/sr0 ]; then
+ CDROM=/dev/sr0
elif [ -e /dev/cd0c ]; then
CDROM=/dev/cd0c
elif [ -e /dev/acd0c ]; then
CDROM=/dev/acd0c
elif [ -e /dev/disk1 ]; then
CDROM=/dev/disk1
+ elif [ "$OSFLAVOUR" = "OSX" ] && [[ $(diskutil list) =~ CD_part.*(disk.)$'\n' ]]; then
+ CDROM=/dev/${BASH_REMATCH[1]}
fi
fi
+# We used to use EXTRAVERBOSE=y to turn on more debug output. Now
+# that's changed to a number to allow for more control. If
+# EXTRAVERBOSE=y, set it to 1 for backwards compatibility.
+if [ "$EXTRAVERBOSE" = "y" ]; then
+ EXTRAVERBOSE=1
+fi
+if [ "$EXTRAVERBOSE" = "n" ]; then
+ EXTRAVERBOSE=0
+fi
+
# Parse command line options
-#while getopts 1a:bc:C:d:Dhj:klLnNo:pr:S:t:T:vVx opt ; do
-while getopts 1a:A:bc:C:d:Dfhj:klLnNo:pr:Rs:S:vVx opt ; do
+#while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPq:r:Rs:S:t:T:vVxw:W: opt ; do
+while getopts 1a:bBc:C:d:Defghj:klLmMnNo:pPq:r:s:S:t:T:UvVxX:w:W:z opt ; do
case "$opt" in
1) ONETRACK=y ;;
a) ACTIONS="$OPTARG" ;;
- A) EXPACTIONS="$OPTARG";;
- b) BATCH=y ;;
- c) if [ -e "$OPTARG" ] ; then . "$OPTARG" ; else echo "abcde error: config file \"$OPTARG\" cannot be found." >&2 ; exit 1 ; fi ;;
- C) DISCID="${OPTARG#abcde.}" ;;
+ A) EXPACTIONS="$OPTARG" ;;
+ b) BATCHNORM=y ;;
+ B) NOBATCHREPLAYGAIN=y ;;
+ c) if [ -e "$OPTARG" ] ; then . "$OPTARG" ; else log error "config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
+ C) DISCID="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
d) CDROM="$OPTARG" ;;
D) set -x ;;
h) usage; exit ;;
- f) FORCECDDBUSELOCAL=y ;;
+ e) ERASEENCODEDSTATUS=y ;;
+ E) ENCODING="$OPTARG" ;;
+ f) FORCE=y ;;
+ g) NOGAP=y ;;
i) INLINETAG=y ;;
j) MAXPROCS="$OPTARG" ;;
k) KEEPWAVS=y ;;
l) LOWDISK=y ;;
- L) CDDBUSELOCAL="y" ;;
- n) CDDBAVAIL="n" ;;
- N) INTERACTIVE="n" ;;
+ L) CDDBUSELOCAL=y ;;
+ n) CDDBAVAIL=n ;;
+ N) INTERACTIVE=n ;;
m) DOSPLAYLIST=y ;;
+ M) DOCUE=y ;;
o) OUTPUTTYPE="$OPTARG" ;;
- p) PADTRACKS="y" ;;
+ p) PADTRACKS=y ;;
+ P) USEPIPES=y ;;
+ q) QUALITYLEVEL="$OPTARG" ;;
r) REMOTEHOSTS="$OPTARG" ;;
- R) REPLAYGAIN=y ;;
- s) STARTTRACKNUMBER="$OPTARG" ;;
+ R) CDDBLOCALRECURSIVE=y ;;
+ s) SHOWCDDBFIELDS="$OPTARG" ;;
S) CDSPEEDVALUE="$OPTARG" ;;
- t) PREPROCESSFORMATS="$OPTARG"
- PREPROCESS=y ;;
- T) POSTPROCESSFORMATS="$OPTARG" ;;
- v)
+ t) STARTTRACKNUMBER="$OPTARG" ;;
+ T) STARTTRACKNUMBER="$OPTARG" ; STARTTRACKNUMBERTAG="y" ;;
+ U) CDDBPROTO=5 ;;
+ v)
echo "This is abcde v$VERSION."
echo "Usage: abcde [options] [tracks]"
echo "abcde -h for extra help"
exit
;;
- V) EXTRAVERBOSE="y" ;;
+ V) EXTRAVERBOSE=$(($EXTRAVERBOSE + 1)) ;;
x) EJECTCD="y" ;;
+ X) CUE2DISCID="$OPTARG" ;;
+ w) COMMENT="$OPTARG" ;;
+ W) if echo $OPTARG | grep "[[:digit:]]" > /dev/null 2>&1 ; then
+ STARTTRACKNUMBER="${OPTARG}01"
+ STARTTRACKNUMBERTAG="y"
+ COMMENT="CD${OPTARG}"
+ DISCNUMBER="${OPTARG}"
+ else
+ log error "argument of -W must be integer"
+ exit 1
+ fi
+ ;;
+ z) DEBUG=y ; CDROMREADERSYNTAX=debug ; EJECTCD="n" ;;
?) usage; exit ;;
esac
done
shift $(($OPTIND - 1))
-# Decide if we can continue. TO_REMOVE as soon as we find out about dagrab
-if [ "$ONETRACK" = "y" ] ; then
+# Here it comes the worse part of the whole thing. From here until we start
+# ripping, we have a mixture of sanity checks, verifications, default settigs
+# and other crazy stuff that interdepends, but hey, someone has to do it.
+
+# If NOCDDBQUERY is set, don't query the CDDB server.
+if [ "$NOCDDBQUERY" = "y" ]; then
+ CDDBAVAIL="n"
+fi
+
+# If the user specified a flac file, then switch to special flac mode
+if echo "$CDROM" | grep -i '.flac$' > /dev/null 2>&1 ; then
+ if [ ! -f "$CDROM" ]; then
+ log error "the defined file for FLAC ripping cannot be found" >&2
+ exit 1
+ fi
+ vecho warning "switching to flac CDROMREADERSYNTAX..."
+ CDROMREADERSYNTAX=flac
+ # We have a builtin version of cue2discid...
+ case "$CUE2DISCID" in
+ builtin);;
+ *) NEEDCUE2DISCID=y;;
+ esac
+ NEEDMETAFLAC=y
+ EJECTCD=n
+fi
+
+# If the user provided a DISCID, disable eject
+if [ -n "$DISCID" ] || [ "$CDROMREADERSYNTAX" = "flac" ]; then EJECTCD=n ; fi
+
+# Check the available cd rippers in the system, from the ones we know.
+if [ "$CDROMREADERSYNTAX" = "" ]; then
+ for DEFAULT_CDROMREADER in $DEFAULT_CDROMREADERS; do
+ if new_checkexec $DEFAULT_CDROMREADER; then
+ CDROMREADERSYNTAX=$DEFAULT_CDROMREADER
+ break
+ fi
+ done
+ if [ "$CDROMREADERSYNTAX" = "" ]; then
+ log error "no cdreader found in your PATH"
+ log error "hints: are all dependencies installed? has the \$PATH been modified?"
+ exit 1
+ fi
+fi
+
+# Decide if we can continue.
+if [ "$ONETRACK" = "y" ]; then
+ # FIXME # remove check as soon as we find out about the other readers
case "$CDROMREADERSYNTAX" in
- dagrab|debug) echo "abcde error: ONETRACK reading is not suported with "$CDROMREADERSYNTAX" yet"
- exit 1 ;;
+ flac) ;;
+ cdparanoia) ;;
+ cdda2wav | icedax) ;;
+ *) log error "$CDROMREADERSYNTAX does not support ONETRACK mode"
+ exit 1 ;;
esac
- if [ "$BATCH" = "y" ]; then
- echo "abcde error: BATCH mode is not compatible with ONETRACK mode"
+ if [ "$BATCHNORM" = "y" ]; then
+ log warning "BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
+ BATCHNORM=n
+ fi
+ if [ "$NOGAP" = "y" ]; then
+ log warning "NOGAP mode is not compatible with ONETRACK mode. Disabling..."
+ NOGAP=n
fi
# It does not matter how many tracks we want. In ONETRACK mode we grab them all
+ # FIXME # allow ranges of tracks to be selected for onetrack ripping
if [ $# -gt 0 ]; then
- vecho "ONETRACK mode selected: grabbing all tracks..."
+ log warning "ONETRACK mode selected, grabbing all tracks..."
fi
else
while [ $# -gt 0 ]; do
# Range parsing code courtesy of Vincent Ho
- RSTART=$(echo $1 | cut -f1 -d-)
- REND=$(echo $1 | cut -f2 -d-)
- if [ "$RSTART" = "$REND" ]; then
- NEWTRACKS="$RSTART"
+ # Cleaned up to use shell built-ins by Charles Steinkuehler
+ if [ "${1#*[^0-9-]}" != "$1" ]; then
+ log error "syntax error while processing track numbers ($1)"
+ exit 1
else
- NEWTRACKS=$(f_seq_line $RSTART $REND)
+ RSTART=${1%%-*}
+ REND=${1##*-}
+ while [ ${RSTART:=1} -le ${REND:=0} ] ; do
+ TRACKQUEUE="$TRACKQUEUE $RSTART"
+ RSTART=$(( $RSTART + 1 ))
+ done
fi
- TRACKQUEUE=$(echo "$TRACKQUEUE" "$NEWTRACKS")
shift
done
fi
+# List of valid actions: cddb,read,normalize,encode,tag,move,playlist,clean
+# List of experimental actions: retag,transcode
+
+# Determine what actions are to be done from $ACTIONS and set the
+# following environment variables for them:
+DOCDDB=n
+DOREAD=n
+DONORMALIZE=n
+DOPREPROCESS=n
+DOENCODE=n
+DOPOSTPROCESS=n
+DOTAG=n
+DOMOVE=n
+DOREPLAYGAIN=n
+DOPLAYLIST=n
+DOCLEAN=n
+## FIXME ## Lets keep compatibility with -M
+[ "$DOCUE" != "y" ] && DOCUE=n
+
+for ACTION in $(echo $ACTIONS | tr , \ )
+do
+ case $ACTION in
+ default) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOCLEAN=y;;
+ cue) DOCUE=y ; MAKECUEFILE=y ;;
+ cddb) DOCDDB=y;;
+ read) DOREAD=y;;
+ normalize) DONORMALIZE=y; DOREAD=y;;
+# preprocess) DOPREPROCESS=y; DOREAD=y;;
+ encode) DOENCODE=y; DOREAD=y;;
+# postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
+ tag) DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
+ move) DOMOVE=y; DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
+ replaygain) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOREPLAYGAIN=y;;
+ playlist) DOCDDB=y; DOPLAYLIST=y;;
+ clean) DOCLEAN=y;;
+ esac
+done
+
+if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
+ # FIXME # should we abort on error or just inform the user?
+ log warning "selected both normalize and replaygain actions"
+fi
+
+for SHOWCDDBFIELD in $(echo $SHOWCDDBFIELDS | tr , \ ); do
+ case $SHOWCDDBFIELD in
+ y*|Y*) SHOWCDDBYEAR="y";;
+ g*|G*) SHOWCDDBGENRE="y";;
+ *) ;;
+ esac
+done
+
# At this point a CDROM has to be defined, so we check it exists.
-if [ "$CDROM" != "" ] ; then
- if [ "$CDROMREADERSYNTAX" = "cdda2wav" ] && [ "$NEEDCDROMID" = "y" ] ; then
+if [ X"$CDROM" != "X" ] ; then
+ if ( [ "$CDROMREADERSYNTAX" = "cdda2wav" ] || [ "$CDROMREADERSYNTAX" = "icedax" ] ) && [ "$NEEDCDROMID" = "y" ] ; then
if [ "$OSFLAVOUR" = "FBSD" ]; then
- if ! echo "$CDROMID" | grep "^[0-9],[0-9],[0-9]$" >/dev/null 2>&1 ; then
- echo "abcde error: CDROMID not in the right format for $CDROMREADERSYNTAX"
- echo "Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
+ if echo "$CDROMID" | grep "^[0-9],[0-9],[0-9]$" >/dev/null 2>&1 ; then :; else
+ log error "CDROMID not in the right format for $CDROMREADERSYNTAX"
+ log error "Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
exit 1
fi
fi
- elif [ ! -e $CDROM ] ; then
- echo "abcde error: CDROM device cannot be found." >&2
+ elif [ ! -e "$CDROM" -a X"$DOREAD" = "Xy" ]; then
+ log error "CDROM device cannot be found."
exit 1
fi
-else
- echo "abcde error: CDROM has not been defined or cannot be found" >&2
+# avoid processing if we are not going to hit the CDROM.
+elif [ X"$DOREAD" = "Xy" ]; then
+ log error "CDROM has not been defined or cannot be found"
exit 1
fi
+# USEPIPES pre-tests, before we get into more serious stuff
+# Not compatible with:
+# - multiple outputs
+# - normalize
+# - lowdisk algorithm
+# - anything else?
+if [ X"$USEPIPES" = "Xy" ]; then
+ if [ $(echo "$OUTPUTTYPE" | tr , \ | wc -w ) -gt 1 ]; then
+ log error "Unix pipes not compatible with multiple outputs"
+ exit 1
+ fi
+ if [ X"$DONORMALIZE" = "Xy" ]; then
+ log error "Unix pipes not compatible with normalizer"
+ # FIXME # Do we need to exit or shall we just disable the mode?
+ exit 1
+ fi
+ if [ X"$BATCHNORM" = "Xy" ]; then
+ log error "Unix pipes not compatible with BATCHNORM encoding"
+ exit 1
+ fi
+ if [ X"$NOGAP" = "Xy" ]; then
+ log error "Unix pipes not compatible with NOGAP encoding"
+ exit 1
+ fi
+ if [ X"$DOENCODE" = "Xn" ]; then
+ vecho warning "Disabling Unix pipes since we are not encoding!"
+ USEPIPES=n
+ fi
+ if [ X"$LOWDISK" = "Xy" ]; then
+ log error "Unix pipes not compatible with lowdisk algorithm"
+ exit 1
+ fi
+fi
+
+# LOWDISK pre-tests, before we get into more problematic stuff
+# Not compatible with anything that needs all the files in the hard disc:
+# - BATCHNORM
+# - NOGAP lame mode
+if [ X"$LOWDISK" = "Xy" ]; then
+ if [ X"$BATCHNORM" = "Xy" ]; then
+ log error "Unix pipes not compatible with BATCHNORM encoding"
+ exit 1
+ fi
+ if [ X"$NOGAP" = "Xy" ]; then
+ log error "Unix pipes not compatible with NOGAP encoding"
+ exit 1
+ fi
+fi
+
+# BATCHNORM pre-tests, before we get into serious problems
+# Not compatible with
+if [ "$BATCHNORM" = "y" ] && [ "$DONORMALIZE" = "n" ]; then
+ vecho warning "Disabling BATCHNORM since we are not normalizing!"
+ BATCHNORM=n
+fi
+
+# Check the encoding format from the ones available in the system, if nothing has been configured.
+if [ X"$OUTPUTTYPE" = "X" ]; then
+ for DEFAULT_OUTPUT in $( echo "$DEFAULT_OUTPUT_BINARIES" | tr , \ ); do
+ DEFAULT_OUTPUT_FORMAT="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 1)"
+ DEFAULT_OUTPUT_BINARY="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 2)"
+ if [ -x $(which $DEFAULT_OUTPUT_BINARY) ] ; then
+ OUTPUTTYPE=$DEFAULT_OUTPUT_FORMAT
+ vecho "No default output type defined. Autoselecting $OUTPUTTYPE..." >&2
+ break
+ fi
+ done
+ if [ X"$OUTPUTTYPE" = "X" ]; then
+ log error "no encoder found in the PATH"
+ log error "hints: are all dependencies installed? has the \$PATH been modified?"
+ exit 1
+ fi
+fi
+
# Decide which CDROM reader we're gonna use
case "$CDROMREADERSYNTAX" in
cdparanoia|debug)
CDROMREADER="$CDPARANOIA"
CDROMREADEROPTS="$CDPARANOIAOPTS"
;;
- cdda2wav)
+ cdda2wav | icedax)
CDROMREADER="$CDDA2WAV"
CDROMREADEROPTS="$CDDA2WAVOPTS"
;;
CDROMREADER="$CDDAFS"
CDROMREADEROPTS="$CDDAFSOPTS"
;;
+ flac)
+ CDROMREADER="$FLAC"
+ CDROMREADEROPTS="$FLACOPTS"
+ ;;
esac
# There's only one normalize...
;;
esac
-# If nothing has been specified, use oggenc for oggs and lame for mp3s and flac for flacs and speexenc for speex and mppenc for mpps
+# Allow -o OUTPUT(1):OPTIONS(1),...,OUTPUT(N):OPTIONS(N) mode of operation
+if echo "$OUTPUTTYPE" | grep ":" > /dev/null 2>&1 ; then
+ for OUTPUT in "$(echo "$OUTPUTTYPE" | tr \ \|| tr , \ | tr \| \ )"; do
+ case "$OUTPUT" in
+ vorbis:*|ogg:*) OGGENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
+ mp3:*) MP3ENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
+ flac:*) FLACENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
+ spx:*) SPEEXENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
+ mpc:*) MPPENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
+ m4a:*) AACENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
+ esac
+ done
+ for OUTPUT in "$(echo "$OUTPUTTYPE" | tr , \ )"; do
+ TEMPOUTPUT=$( echo "$OUTPUT" | cut -d: -f1 )
+ TEMPOUTPUTTYPE="${TEMPOUTPUTTYPE:+$TEMPOUTPUTTYPE,}$TEMPOUTPUT"
+ done
+ OUTPUTTYPE="$TEMPOUTPUTTYPE"
+fi
+
+# If nothing has been specified, use oggenc for oggs and lame for mp3s and flac
+# for flacs and speexenc for speex and mppenc for mpps and faac for m4as
# Getting ready for multiple output changes
for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
do
case $OUTPUT in
- ogg) [ "$OGGENCODERSYNTAX" = "default" ] && OGGENCODERSYNTAX=oggenc
- echo $ACTIONS | grep tag > /dev/null 2>&1 && NEEDCOMMENTER=y
- if [ "$REPLAYGAIN" = "y" ]; then NEEDVORBISGAIN=y; fi
+ vorbis|ogg)
+ [ "$OGGENCODERSYNTAX" = "default" ] && OGGENCODERSYNTAX=oggenc
+ [ "$DOTAG" = "y" ] && NEEDCOMMENTER=y
+ [ "$DOREPLAYGAIN" = "y" ] && NEEDVORBISGAIN=y
+ OGGOUTPUTCONTAINER=ogg
;;
- mp3) [ "$MP3ENCODERSYNTAX" = "default" ] && MP3ENCODERSYNTAX=lame
- echo $ACTIONS | grep tag > /dev/null 2>&1 && NEEDTAGGER=y
+ mp3)
+ [ "$MP3ENCODERSYNTAX" = "default" ] && MP3ENCODERSYNTAX=lame
+ [ "$DOTAG" = "y" ] && NEEDTAGGER=y
+ [ "$DOREPLAYGAIN" = "y" ] && NEEDMP3GAIN=y
+ ;;
+ flac)
+ [ "$FLACENCODERSYNTAX" = "default" ] && FLACENCODERSYNTAX=flac
+ [ "$DOTAG" = "y" ] && NEEDMETAFLAC=y
+ [ "$DOREPLAYGAIN" = "y" ] && NEEDMETAFLAC=y
+ [ "$ONETRACK" = "y" ] && [ "$DOCUE" = "y" ] && NEEDMETAFLAC=y
+ ;;
+ spx)
+ [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc
+# [ "$DOREPLAYGAIN" = "y" ] &&
+ ;;
+ mpc)
+ [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc
+ [ "$DOREPLAYGAIN" = "y" ] && NEEDMPPGAIN=y
+ ;;
+ m4a)
+ [ "$AACENCODERSYNTAX" = "default" ] && AACENCODERSYNTAX=faac
+ [ "$DOTAG" = "y" ] && CHECKATOMICPARSLEY=y
+ ;;
+ wav)
+ if [ "$KEEPWAVS" = "y" ]; then
+ vecho "Setting the KEEPWAVS option, since the resulting wav files were requested..."
+ fi
+ KEEPWAVS=move
+ ;;
+ *) log error "Invalid OUTPUTTYPE defined"
+ exit 1
;;
- flac) [ "$FLACENCODERSYNTAX" = "default" ] && FLACENCODERSYNTAX=flac
- echo $ACTIONS | grep tag > /dev/null 2>&1 && NEEDMETAFLAC=y
- ;;
- spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
- mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
- *) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
- exit 1
- ;;
esac
done
# decide which encoder
case "$MP3ENCODERSYNTAX" in
lame)
- MP3ENCODEROPTS="$LAMEOPTS"
+ MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$LAMEOPTS}"
MP3ENCODER="$LAME"
;;
+ toolame)
+ MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$TOOLAMEOPTS}"
+ MP3ENCODER="$TOOLAME"
+ ;;
gogo)
- MP3ENCODEROPTS="$GOGOOPTS"
+ MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$GOGOOPTS}"
MP3ENCODER="$GOGO"
;;
bladeenc)
- MP3ENCODEROPTS="$BLADEENCOPTS"
+ MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$BLADEENCOPTS}"
MP3ENCODER="$BLADEENC"
;;
l3enc)
- MP3ENCODEROPTS="$L3ENCOPTS"
+ MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$L3ENCOPTS}"
MP3ENCODER="$L3ENC"
;;
xingmp3enc)
- MP3ENCODEROPTS="$XINGMP3ENCOPTS"
+ MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$XINGMP3ENCOPTS}"
MP3ENCODER="$XINGMP3ENC"
;;
mp3enc)
- MP3ENCODEROPTS="$MP3ENCOPTS"
+ MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$MP3ENCOPTS}"
MP3ENCODER="$MP3ENC"
;;
esac
case "$OGGENCODERSYNTAX" in
vorbize)
- OGGENCODEROPTS="$VORBIZEOPTS"
+ OGGENCODEROPTS="${OGGENCODEROPTSCLI:-$VORBIZEOPTS}"
OGGENCODER="$VORBIZE"
;;
oggenc)
- OGGENCODEROPTS="$OGGENCOPTS"
+ OGGENCODEROPTS="${OGGENCODEROPTSCLI:-$OGGENCOPTS}"
OGGENCODER="$OGGENC"
;;
esac
case "$FLACENCODERSYNTAX" in
flac)
- FLACENCODEROPTS="$FLACOPTS"
- FLACENCODER="$FLAC"
+ FLACENCODEROPTS="${FLACENCODEROPTSCLI:-$FLACOPTS}"
+ FLACENCODER="$FLAC"
+ if [ "$DOREPLAYGAIN" = "y" ]; then
+ FLACENCODEROPTS="${FLACENCODEROPTS} --replay-gain"
+ fi
+ # FLAC streams can be encapsulated on a Ogg transport layer
+ if echo "$FLACENCODEROPTS" | grep -E -- "(^| )--ogg($| )" > /dev/null 2>&1 ;then
+ log error "FLAC on an Ogg container is not yet supported"
+ log error "due to problem with adding comments to such files"
+ exit 1
+ FLACOUTPUTCONTAINER=ogg
+ else
+ FLACOUTPUTCONTAINER=flac
+ fi
;;
esac
case "$SPEEXENCODERSYNTAX" in
speexenc)
- SPEEXENCODEROPTS="$SPEEXENCOPTS"
+ SPEEXENCODEROPTS="${SPEEXENCODEROPTSCLI:-$SPEEXENCOPTS}"
SPEEXENCODER="$SPEEXENC"
;;
esac
case "$MPPENCODERSYNTAX" in
mppenc)
- MPPENCODEROPTS="$MPPENCOPTS"
+ MPPENCODEROPTS="${MPPENCODEROPTSCLI:-$MPPENCOPTS}"
MPPENCODER="$MPPENC"
;;
esac
+case "$AACENCODERSYNTAX" in
+ faac)
+ AACENCODEROPTS="${AACENCODEROPTSCLI:-$AACENCOPTS}"
+ AACENCODER="$AACENC"
+ ;;
+esac
# and which tagger
-
if [ "$ID3TAGV" = "1" ]; then
TAGGER="$ID3"
TAGGEROPTS="$ID3OPTS"
TAGGEROPTS="$ID3V2OPTS"
fi
+# NOGAP is specific to lame. Other encoders fail ...
+if [ "$NOGAP" = "y" ] && [ ! "$MP3ENCODER" = "lame" ]; then
+ log warning "the NOGAP option is specific to lame. Deactivating..."
+ NOGAP=n
+fi
+
+# Options for mkcue
+case "$CUEREADERSYNTAX" in
+ default|mkcue)
+ CUEREADEROPTS="${CDROM}"
+ CUEREADER="$MKCUE"
+ ;;
+esac
+
+# which information retrieval tool are we using?
+case "$CDDBTOOL" in
+ cddb) ;;
+ musicbrainz) ;;
+esac
+
+# Check if both OGGEOUTPUTCONTAINER and FLACOUTPUTCONTAINER are the same, and differentiante them
+if [ X"$OGGOUTPUTCONTAINER" = "Xogg" ] && [ X"$FLACOUTPUTCONTAINER" = "Xogg" ]; then
+ log error "FLAC on an Ogg container is not yet supported"
+ log error "due to problem with adding comments to such files"
+ exit 1
+ OGGOUTPUTCONTAINER=ogg.ogg
+ FLACOUTPUTCONTAINER=flac.ogg
+ vecho warning "modified file endings due to conflicting transport layers in Ogg/Vorbis and Ogg/FLAC"
+fi
+
# Clean up nice options (either use '-n NICELEVEL or -NICELEVEL')
if [ "$ENCNICE" ]; then
fi
# Don't check for stuff if it's not needed
-if [ "$REMOTEHOSTS" ]; then NEEDDISTMP3=y; fi
-if echo $ACTIONS | grep normalize > /dev/null 2>&1 ; then NEEDNORMALIZER=y; fi
-if [ "$EJECTCD" = "y" ]; then NEEDEJECT=y; fi
-if echo $ACTIONS | grep cddb > /dev/null 2>&1 ; then NEEDHTTPGET=y ; fi
+if [ "$REMOTEHOSTS" ]; then
+ NEEDDISTMP3=y
+fi
+if [ "$DONORMALIZE" = "y" ]; then
+ NEEDNORMALIZER=y
+fi
+if [ "$EJECTCD" = "y" ]; then
+ NEEDEJECT=y
+fi
+if [ ! "$CDDBAVAIL" = "n" ] && [ "$DOCDDB" = "y" ]; then
+ if [ "$CDDBMETHOD" = "cddb" ]; then
+ NEEDHTTPGET=y
+ elif [ "$CDDBMETHOD" = "musicbrainz" ]; then
+ :
+ fi
+fi
+if [ "$DOCUE" = "y" ]; then
+ NEEDCUEREADER=y
+fi
-if [ X"$CDSPEEDVALUE" != "X" ]; then
+if [ X"$CDSPEEDVALUE" != "X" ] && [ "$DOREAD" = "y" ]; then
case "$CDROMREADERSYNTAX" in
cdparanoia|debug) CDROMREADEROPTS="$CDPARANOIAOPTS -S $CDSPEEDVALUE" ;;
+ ### FIXME ### translate "cue2discid" from python to bash
+ flac) NEEDMETAFLAC=y ; NEEDCUE2DISCID=y ; CDSPEEDVALUE="" ;;
*) NEEDCDSPEED=y ;;
esac
fi
+###USEPIPESSUPPORT###
+
+# Rippers with USEPIPE support
+# FIXME # Include here all the rippers we can figure out support pipes
+PIPERIPPER_cdparanoia="-"
+PIPERIPPER_debug="-"
+PIPERIPPER_flac="-c "
+
+# Encoders with USEPIPE support
+# FIXME # Include here all the encoders we can figure out support pipes
+PIPE_lame="-"
+PIPE_bladeenc="-"
+PIPE_oggenc="-"
+PIPE_flac="-"
+
+# Figure out if we can use pipes with the ripper/encoder combination
+# exit otherwise
+if [ "$USEPIPES" = "y" ]; then
+ PIPERIPPERSVARCHECK="PIPERIPPER_${CDROMREADERSYNTAX}"
+ case "$OUTPUT" in
+ mp3)
+ PIPEENCODERSVARCHECK="PIPE_$MP3ENCODERSYNTAX" ;;
+ vorbis|ogg)
+ PIPEENCODERSVARCHECK="PIPE_$OGGENCODERSYNTAX" ;;
+ flac)
+ PIPEENCODERSVARCHECK="PIPE_$FLACENCODERSYNTAX" ;;
+ spx)
+ PIPEENCODERSVARCHECK="PIPE_$SPEEXENCODER" ;;
+ mpc)
+ PIPEENCODERSVARCHECK="PIPE_$MPPENCODER" ;;
+ esac
+ decho "PIPERIPPERSVARCHECK: $( eval echo "\$$PIPERIPPERSVARCHECK" )"
+ if [ "$( eval echo "\$$PIPERIPPERSVARCHECK" )" = "$" ] || \
+ [ "$( eval echo "\$$PIPERIPPERSVARCHECK" )" = "" ] ; then
+ log error "no support for pipes with given ripper"
+ log error "read the USEPIPES file from the source tarball to get help."
+ log error "On a Debian system, it is under /usr/share/doc/abcde/USEPIPES.gz"
+ exit 1;
+ fi
+ decho "PIPEENCODERSVARCHECK: $( eval echo "\$$PIPEENCODERSVARCHECK" )"
+ if [ "$( eval echo "\$$PIPEENCODERSVARCHECK" )" = "$" ] || \
+ [ "$( eval echo "\$$PIPEENCODERSVARCHECK" )" = "" ] ; then
+ log error "no support for pipes with given encoder"
+ log error "read the USEPIPES file from the source tarball to help"
+ log error "on a Debian system, read /usr/share/doc/abcde/USEPIPES.gz"
+ exit 1;
+ fi
+fi
# Make sure a buncha things exist
for X in $CDROMREADER $CDDISCID ${NEEDTAGGER+$TAGGER} $MP3ENCODER \
$OGGENCODER $FLACENCODER $SPEEXENCODER $MPPENCODER \
+ $AACENCODER $CDDBTOOL \
+ ${NEEDATOMICPARSLEY+$ATOMICPARSLEY} \
${NEEDHTTPGET+$HTTPGET} ${NEEDDISTMP3+$DISTMP3} \
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC} \
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT} \
- ${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED} \
- ${NEEDVORBISGAIN+$VORBISGAIN}
+ ${NEEDDISKUTIL+diskutil} ${NEEDCDSPEED+$CDSPEED} \
+ ${NEEDVORBISGAIN+$VORBISGAIN} ${NEEDMP3GAIN+$MP3GAIN} \
+ ${NEEDMPPGAIN+$MPPGAIN} ${NEEDCUEREADER+$CUEREADER} \
+ ${NEEDCUE2DISCID+$CUE2DISCID}
do
- # Cut off the command-line options we just added in
- X=$(echo $X | cut -d' ' -f2)
- if [ "$(which $X)" = "" ]; then
- echo "abcde error: $X is not in your path." >&2
- exit 1
- elif [ ! -x $(which $X) ]; then
- echo "abcde error: $X is not executable." >&2
- exit 1
- fi
+ checkexec "$X"
done
+if [ "$CHECKATOMICPARSLEY" = "y" ]; then
+ if ! new_checkexec "$ATOMICPARSLEY"; then
+ echo "WARNING: $ATOMICPARSLEY Not Found Not Post-Tagging!"
+ DOTAG='n'
+ else
+ echo "Using $ATOMICPARSLEY To Tag AAC Tracks."
+ fi
+fi
+
+# And last but not least, check if we can diff between files. We do not abort,
+# since diffing is not critical...
+if [ -x $(which $DIFF) ]; then :; else
+ vecho warning "Disabling diff since we cannot find it in the \$PATH..."
+ DIFF=""
+fi
+
+## Now that we have metaflac, check if we need cue2discid
+#case $CDROMREADERSYNTAX in
+# flac)
+# TRACKINFO=$($METAFLAC --show-tag=CDDB $CDROM | cut -d"=" -f2 | grep -E "[a-f0-9]{8}")
+# if [ "$TRACKINFO" = "" ]; then
+# checkexec ${NEEDCUE2DISCID+$CUE2DISCID}
+# fi
+# ;;
+#esac
+
CDROMREADER="$CDROMREADER $CDROMREADEROPTS"
CDDBTOOL="$CDDBTOOL $CDDBTOOLOPTS"
HTTPGET="$HTTPGET $HTTPGETOPTS"
# Here it used to say:
# One thousand lines in, we can start doing stuff with things
-# Well, right now we are at line 2139 ;)
-
-# List of valid actions: cddb,read,normalize,encode,tag,playlist,move,clean
-# List of experimental actions: retag,transcode
+# Well, right now we are at line 3737 ;)
# Export needed things so they can be read in this subshell
export CDDBTOOL ABCDETEMPDIR TRACKQUEUE LOWDISK EJECTCD EJECT EJECTOPTS
export CDROM CDDBDATA REMOTEHOSTS MAXPROCS HTTPGET MD5SUM
-# User-definable function to set some things. Use it for
-# - closing the CD tray with eject -t
-# - set the CD speed value with eject -x
-vecho -n "Executing customizable pre-read function... "
+if [ "$DOREAD" = "y" ]; then
+ # User-definable function to set some things. Use it for
+ # - closing the CD tray with eject -t
+ # - set the CD speed value with eject -x
+ vecho -n "Executing customizable pre-read function... "
-pre_read # Execute the user-defined pre-read funtion. Close the CD with it.
+ pre_read # Execute the user-defined pre-read funtion. Close the CD with it.
-vecho "done."
+ vecho "done."
+fi
-do_discid # Get ABCDETEMPDIR created and status file initialized
+# Get ABCDETEMPDIR created and status file initialized
+do_discid
if [ "$DOCDDB" = "y" ]; then
+ # start with a sane default:
+ CDDBLOCALSTATUS=notfound
if [ $CDDBUSELOCAL = "y" ]; then
do_localcddb
fi
- ## FIXME ## ! is non-portable
- if ! checkstatus cddb-choice > /dev/null && [ ! "$CDDBLOCALSUCCESS" = "y" ] ; then
- do_cddbstat
- do_cddbquery
- do_cddbread
+ if checkstatus cddb-choice > /dev/null; then
+ :
+ else
+ if [ "$CDDBLOCALSTATUS" = "notfound" ] ; then
+ case "$CDDBMETHOD" in
+ cddb)
+ do_cddbstat
+ do_cddbquery
+ do_cddbread
+ ;;
+ musicbrainz)
+ do_musicbrainz
+ ;;
+ esac
+ fi
+ CHOICE=$(checkstatus cddb-choice)
+ if [ $CHOICE = 0 ] ; then
+ # We don't have any information at all; try to fall back
+ # to CD-Text for basic information
+ vecho "No CDDB information found, trying cdtext from the CD"
+ do_cdtext
+ fi
fi
do_cddbedit
- eval $($CDDBTOOL parse "$CDDBDATA")
+ eval "$($CDDBTOOL parse "$CDDBDATA")"
fi
# Before reading tracks, we set the speed of the device
if [ X"$CDSPEEDVALUE" != "X" ]; then
case "$CDROMREADERSYNTAX" in
- cdparanoia|debug) : ;;
+ cdparanoia|debug) ;;
+ flac) ;;
*) do_cdspeed ;;
esac
fi
-if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
- case "$CDROMREADERSYNTAX" in
- cdparanoia|debug)
- # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
- if checkstatus cdparanoia-audio-tracks; then
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
- ## FIXME ##
- vecho "Querying the CD to obtain a list of valid audio tracks..."
- $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
- # Obtain a list of valid audio tracks from the results of the query
- CDTRACKQUEUE=$( cat $ABCDETEMODIR/cdparanoia- | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr '\n' ' ' )
- fi
- # Obtain the track padding value from the before-processing list and pad the CD list
- TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " \n" | wc -c )
- for TRACK in $CDTRACKQUEUE ; do
- TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
- PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
- done
- CDTRACKQUEUE=$PADNEWTRACKQUEUE
- # Now, compare if the values in the list are valid tracks in the CD
- for TRACK in $TRACKQUEUE; do
- if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
- NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
- fi
- done
- TRACKQUEUE="$NEWTRACKQUEUE"
- ;;
- esac
+# Define the first and last track, since we might need them later in several places
+FIRSTTRACK=$( get_first $TRACKQUEUE )
+LASTTRACK=$( get_last $TRACKQUEUE )
+
+if [ -f "$ABCDETEMPDIR/status" ] && [ X"$ERASEENCODEDSTATUS" = "Xy" ]; then
+ mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
+ grep -v ^encodetracklocation- < "$ABCDETEMPDIR/status.old" \
+ | grep -v ^encode-output > "$ABCDETEMPDIR/status"
+fi
+
+if checkstatus onetrack ; then ONETRACK=y ; fi
+
+if [ "$ONETRACK" = "y" ]; then
+ # Reuse the CUEFILE in case we created it (now or in a previous run)
+ if CUEFILE=$(checkstatus cuefile); then
+ IMPORTCUESHEET=y
+ fi
fi
# Create playlist if needed (backgroundable) and start reading in tracks
(
-if [ "$ONETRACK" = "y" ]; then :; else
+if [ ! "$ONETRACK" = "y" ]; then
if [ "$DOPLAYLIST" = "y" ]; then
echo Creating playlist... >&2
do_playlist
echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
fi
-if [ "$ONETRACK" = "y" ]; then
- FIRSTTRACK=$( echo $TRACKQUEUE | awk '{print $1}' )
+if [ "$ONETRACK" = "y" ]; then
TRACKS="$FIRSTTRACK"
- for UTRACKNUM in $TRACKQUEUE; do :;done
- if checkstatus readtrack-$FIRSTTRACK; then :; else
- do_cdread_one $UTRACKNUM $FIRSTTRACK
+ if [ "$USEPIPES" = "y" ]; then
+ if checkstatus readencodetrack-$FIRSTTRACK; then :; else
+ do_cdread onetrack $FIRSTTRACK $LASTTRACK | do_encode $FIRSTTRACK %local0% > /dev/null 2>&1
+ fi
+ else
+ if checkstatus readtrack-$FIRSTTRACK; then :; else
+ do_cdread onetrack $FIRSTTRACK $LASTTRACK
+ fi
fi
else
for UTRACKNUM in $TRACKQUEUE
do
if [ "$DOREAD" = "y" ]; then
- if checkstatus readtrack-$UTRACKNUM; then :; else
- do_cdread $UTRACKNUM
+ if [ "$USEPIPES" = "y" ]; then
+ if checkstatus readencodetrack-$UTRACKNUM; then :; else
+ # Read, pipe, shut up!
+ do_cdread $UTRACKNUM | do_encode $UTRACKNUM %local0% > /dev/null 2>&1
+ fi
+ else
+ if checkstatus readtrack-$UTRACKNUM; then :; else
+ do_cdread $UTRACKNUM
+ fi
if [ "$?" != "0" ]; then
# CD read failed - don't give the goahead to
# the encoder
fi
fi
fi
- if [ "$BATCH" = "y" ]; then
- :
+ if [ "$NOGAP" = "y" ] || [ "$BATCHNORM" = "y" ]; then
+ :
else
+ # If we are not reading, set the encode output to loud already, so
+ # that we can see the output of the first track.
+ if [ "$MAXPROCS" = "1" ] && [ ! "$DOREAD" = "y" ]; then
+ echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
+ fi
echo NEXTTRACK # Get the encoder machine churning again
if [ "$DOREAD" = "y" ]; then
if [ "$LOWDISK" = "y" ] && [ "$DOENCODE" = "y" ]; then
fi
# All tracks read, start encoding.
-if [ "$BATCH" = "y" ] || [ "$ONETRACK" = "y" ]; then
+if [ "$NOGAP" = "y" ] || [ "$BATCHNORM" = "y" ] || [ "$ONETRACK" = "y" ]; then
echo NEXTTRACK
fi
+# Execute the user-defined post_read funtion before ejecting CD
+post_read
+
# We are now finished with the cdrom - it can be safely ejected. Note that
# abcde will not have completed yet.
if [ "$EJECTCD" = "y" ] && [ -x $(which $EJECT) ]; then
- # We check if the disk we are processing is actually the disk inside the
+ # We check if the disk we are processing is actually the disk inside the
# CD tray. If not, we do not eject the CD, since it might be so that the
# user ejected it manually.
#CURRENTTRACKINFO=$($CDDISCID $CDROM)
- #if if [ "$?" != "1" ] && [ "$CURRENTTRACKINFO" = "$TRACKINFO" ] ; then
+ #if if [ "$?" != "1" ] && [ "$CURRENTTRACKINFO" = "$TRACKINFO" ] ; then
# More FreeBSD bits.
if [ X"$(uname)" = X"FreeBSD" ] ; then
# FreeBSD eject uses the EJECT environment variable to name the CDROM
cd="$(echo $CDROM | sed -e 's=.*/==;s=[a-h]$==;')"
$eject $EJECTOPTS $cd
elif [ X"$(uname)" = X"Darwin" ] ; then
- disktool -e ${CDROM#/dev/} 0
+ diskutil eject ${CDROM#/dev/} 0
else
- $EJECT $EJECTOPTS $CDROM
+ $EJECT $EJECTOPTS "$CDROM"
fi
#fi
fi
) | (
-## Do we need to pre-process
+## Do we need to pre-process
#if [ x"$PREPROCESS" = "x" ] ; then
# cat
#else
# # all locations are working, wait and try again later
# if [ ! $PREPROCEED ]; then sleep 3; fi
# done
-# ( do_preprocess $PRETRACKNUM
+# ( do_preprocess $PRETRACKNUM
# echo "NEXTTRACK"
# ) &
# done
#
#) | (
-# In batch mode, we want all tracks to be read first.
-if [ "$BATCH" = "y" ]; then
+# In BATCHNORM and/or NOGAP modes, we want all tracks to be read first.
+#BACK
+if [ "$BATCHNORM" = "y" ] || [ "$NOGAP" = "y" ]; then
read GOAHEAD # For blocking - will contain either "NO" or "NEXTTRACK"
if [ "$GOAHEAD" = "NO" ]; then break; fi
for LASTTRACK in $TRACKQUEUE; do :; done
if checkstatus readtrack-$LASTTRACK; then
- if [ "$DONORMALIZE" = "y" ]; then
+ if [ "$DONORMALIZE" = "y" ] && [ "$BATCHNORM" = "y" ]; then
if checkstatus normalizetrack-$LASTTRACK; then :; else do_batch_normalize; fi
- if checkerrors batch-normalize; then exit; fi
+ if checkerrors batch-normalize; then exit 1; fi
fi
- if [ "$DOENCODE" = "y" ]; then
- if checkstatus encodetrack-$LASTTRACK; then :; else do_batch_encode; fi
- if checkerrors batch-encode; then exit; fi
+ if [ "$DOENCODE" = "y" ] && [ "$NOGAP" = "y" ]; then
+ if [ "$DONORMALIZE" = "y" ]; then
+ for UTRACKNUM in $TRACKQUEUE
+ do
+ if checkstatus readtrack-$UTRACKNUM; then
+ if checkstatus normalizetrack-$UTRACKNUM; then :; else do_normalize $UTRACKNUM; fi
+ fi
+ done
+ fi
+ if checkstatus encodetrack-$LASTTRACK; then :; else do_nogap_encode; fi
+ if checkerrors nogap-encode; then exit 1; fi
fi
fi
fi
# If we are using ONETRACK, we can proceed with the normal encoding using just the $FIRSTTRACK as TRACKQUEUE
if [ "$ONETRACK" = "y" ] ; then
- FIRSTTRACK=$( echo $TRACKQUEUE | awk '{print $1}')
- TRACKQUEUE=$FIRSTTRACK
+ TRACKQUEUE="$FIRSTTRACK"
TRACKS="$FIRSTTRACK"
fi
read GOAHEAD # For blocking - will contain either "NO" or "NEXTTRACK"
if [ "$GOAHEAD" = "NO" ]; then break; fi
# find out where this track is to be encoded
- if [ "$DOENCODE" = "y" ]; then
+ if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
# Make sure we have a place to encode this, if not, exit stage right
if [ -z "$ENCODELOCATIONS" ]; then
continue
fi
# Don't proceed with the rest of the loop if we can't encode
if [ "$ABORT" ]; then continue; fi
+ ## FIXME ## Add here
+ ## run_command tagtrack-$OUTPUT-$1 $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
# Set TRACKNUM, TRACKNAME
if [ -e "$CDDBDATA" ]; then
- if [ "$ONETRACK" = "y" ]; then
+ if [ "$ONETRACK" = "y" ]; then
TRACKNAME="$DALBUM"
TRACKNUM="$FIRSTTRACK"
splitvarious
else
-# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
- CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d \[:cntrl:\])
+ CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
+ getcddbinfo TRACKNAME
splitvarious
fi
fi
if checkstatus normalizetrack-$UTRACKNUM; then :; else do_normalize $UTRACKNUM; fi
fi
fi
- if [ "$DOENCODE" = "y" ]; then
+ if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
if checkstatus readtrack-$UTRACKNUM; then
#if checkstatus encodetrack-$UTRACKNUM; then :; else do_encode $UTRACKNUM $LOCATION; fi
if [ "$DONORMALIZE" = "y" ]; then
if checkstatus encodetrack-$UTRACKNUM; then
if checkstatus tagtrack-$UTRACKNUM; then :; else do_tag $UTRACKNUM; fi
fi
+ # Lets tag the cue file
+ if checkstatus cleancuefile >/dev/null; then :; else
+ if checkstatus cuefile >/dev/null ; then
+ do_cleancue
+ fi
+ fi
fi
if [ "$DOMOVE" = "y" ]; then
if checkstatus tagtrack-$UTRACKNUM; then
fi
) &
done
+
+
# Go through it again and make sure there's no distmp3 stragglers, otherwise
# we'll delete the files they're working on
-if [ "$DOENCODE" = "y" ]; then
+# Do NOT play ball if there is no ball to play (so ABORT if needed)
+## FIXME ## Check also for files which are encoded using PIPEs.
+if [ "$DOENCODE" = "y" ] && [ "$USEPIPES" != "y" ] && [ ! "$ABORT" ]; then
PROCEED=
until [ $PROCEED ]
do
fi
# If the above didn't catch the stragglers, this will
wait
+if [ "$DOREPLAYGAIN" = "y" ]; then
+ do_replaygain
+fi
+
+# Execute the user-defined post_encode function before cleaning up
+post_encode
+
# Check to see if run_command logged any errors
if [ -f "$ABCDETEMPDIR/errors" ]; then
- echo "The following commands failed to run:"
+ log error "The following commands failed to run:"
cat "$ABCDETEMPDIR/errors"
# Don't clean up
DOCLEAN=n
# Don't clean up
DOCLEAN=n
fi
+# Check if we have moved all the formats we had previously encoded, if we are not using the FORCE.
+if [ "$DOCLEAN" = "y" ] && [ ! "$FORCE" = "y" ]; then
+ ENCODED_FORMATS=$(grep -E "^encodetrack-(.{3,6})-(.{1,2})$" "$ABCDETEMPDIR/status" | cut -d"-" -f2 | sort -u | tr '\n' '|')
+ MOVED_FORMATS=$(grep -E "^movetrack-output-(.{3,6})$" "$ABCDETEMPDIR/status" | cut -d"-" -f3 | sort -u | tr '\n' '|')
+ if [ "$ENCODED_FORMATS" != "$MOVED_FORMATS" ]; then
+ log warning "The encoded formats does not match with the moved ones"
+ log warning "Formats encoded: $( echo $ENCODED_FORMATS | tr "|" " " )"
+ log warning "Formats moved: $( echo $MOVED_FORMATS | tr "|" " " )"
+ log warning "Use \"abcde -a clean -f -C $DISCID\" to force the removal of the remaining data."
+ DOCLEAN=n
+ fi
+fi
if [ "$DOCLEAN" = "y" ]; then
# Wipe all the evidence
# Gimme gimme gimme some more time!
fi
)
exit 0
+
+# b:is_bash
+# vim:tabstop=4
HCoop / clinton / abcde.git / blobdiff