Fix syntax error in tagged speex command
[clinton/abcde.git] / abcde
1 #!/bin/bash
2 # Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
3 # Copyright (c) 2003-2006 Jesus Climent <jesus.climent@hispalinux.es>
4 # This code is hereby licensed for public consumption under either the
5 # GNU GPL v2 or greater, or Larry Wall's Artistic license - your choice.
6 #
7 # You should have received a copy of the GNU General Public License along
8 # with this program; if not, write to the Free Software Foundation, Inc.,
9 # 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
10 #
11 # Copyright for this work is to expire January 1, 2010, after which it
12 # shall be public domain.
13 #
14 # $Id$
15
16 VERSION='2.4.0.1'
17
18 usage ()
19 {
20 echo "This is abcde v$VERSION."
21 echo "Usage: abcde [options] [tracks]"
22 echo "Options:"
23 echo "-1 Encode the whole CD in a single file"
24 echo "-a <action1[,action2]...>"
25 echo " Actions to perform:"
26 echo " cddb,read,normalize,encode,tag,move,replaygain,playlist,clean"
27 #echo "-A Experimental actions (retag, transcode)"
28 echo "-b Enable batch normalization"
29 #echo "-B Disable batch replaygain (do file by file)"
30 echo "-c <file>"
31 echo " Specify a configuration file (overrides system and user config files)"
32 echo "-C <discid#>"
33 echo " Specify discid to resume from (only needed if you no longer have the cd)"
34 echo "-d <device>"
35 echo " Specify CDROM device to grab (flac uses a single-track flac file)"
36 echo "-D Debugging mode (equivalent to sh -x abcde)"
37 echo "-e Erase encoded track information from status file"
38 echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
39 echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
40 echo "-h This help information"
41 #echo "-i Tag files while encoding, when possible (local only) -NWY-"
42 echo "-j <#> Number of encoder processes to run at once (localhost)"
43 echo "-k Keep the wav tracks for later use"
44 echo "-l Use low disk space algorithm"
45 echo "-L Use local CDDB storage directory"
46 echo "-n No lookup. Don't query CDDB, just create and use template"
47 echo "-N Noninteractive. Never prompt for anything"
48 echo "-m Modify playlist to include CRLF endings, to comply with some players"
49 echo " WARNING: Deprecated. Use \"cue\" action"
50 #echo "-M Create a CUE file"
51 echo "-o <type1[,type2]...>"
52 echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav,m4a). Defaults to vorbis"
53 echo "-p Pad track numbers with 0's (if less than 10 tracks)"
54 echo "-P Use UNIX pipes to read+encode without wav files"
55 echo "-q <level>"
56 echo " Set quality level (high,medium,low)"
57 echo "-r <host1[,host2]...>"
58 echo " Also encode on these remote hosts"
59 echo "-R Use local CDDB in recursive mode"
60 echo "-s <field>"
61 echo " Show fields from the CDDB info (year,genre)"
62 echo "-S <#> Set the CD speed"
63 echo "-t <#> Start the track numbering at a given number"
64 echo "-T <#> Same as -t but modifies tag numbering"
65 echo "-U Do NOT use UNICODE (UTF8) tags and comments"
66 echo "-v Show version number and exit"
67 echo "-V Be a bit more verbose about what is happening behind the scenes"
68 echo "-x Eject CD after all tracks are read"
69 echo "-w <comment>"
70 echo " Add a comment to the CD tracks"
71 echo "-W <#> Concatenate CDs: -T #01 -w \"CD #\""
72 echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
73 echo ""
74 echo "Tracks is a space-delimited list of tracks to grab."
75 echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
76 echo ""
77 #echo "Double hyphens are used to concatenate tracks"
78 }
79
80 addstatus ()
81 {
82 echo "$@" >> "$ABCDETEMPDIR/status"
83 }
84
85 # log [level] [message]
86 #
87 # log outputs the right message in a common format
88 log ()
89 {
90 BLURB="$1"
91 shift
92 case $BLURB in
93 error) echo "[ERROR] abcde: $@" >&2 ;;
94 warning) echo "[WARNING] $@" >&2 ;;
95 info) echo "[INFO] $@" ;;
96 esac
97 }
98
99 # Funtions to replace the need of seq, which is too distribution dependant.
100 f_seq_row ()
101 {
102 i=$1
103 while [ $i -ne `expr $2 + 1` ]
104 do
105 echo $i
106 i=`expr $i + 1`
107 done
108 }
109
110 f_seq_line ()
111 {
112 i=$1
113 if echo $i | grep "[[:digit:]]" > /dev/null 2>&1 ; then
114 while [ $i -ne `expr $2 + 1` ]
115 do
116 printf $i" "
117 i=`expr $i + 1`
118 done
119 echo
120 else
121 log error "syntax error while processing track numbers"
122 exit 1
123 fi
124 }
125
126 # Functions to replace the need of awk {print $1} and {print $NF}
127 get_first()
128 {
129 if [ X"$1" = "X" ]; then
130 for first in `cat`; do
131 break
132 done
133 else
134 first=$1
135 fi
136 echo $first
137 }
138
139 get_last()
140 {
141 if [ X"$1" = "X" ]; then
142 for stdin in `cat`; do
143 last=$stdin
144 done
145 else
146 for last in $@ ; do :; done
147 fi
148 echo $last
149 }
150
151 # checkstatus [blurb]
152 # Returns "0" if the blurb was found, returns 1 if it wasn't
153 # Puts the blurb content, if available, on stdout.
154 # Otherwise, returns "".
155 checkstatus ()
156 {
157 # Take the last line in the status file if there's multiple matches
158 PATTERN="^$1(=.*)?$"
159 BLURB=$(egrep $PATTERN "$ABCDETEMPDIR/status" | tail -n 1)
160
161 if [ -z "$BLURB" ]; then
162 # No matches found
163 return 1
164 else
165 # Matches found
166 # See if there's a = in it
167 if [ "$(echo $BLURB | grep -c =)" != "0" ]; then
168 echo "$(echo $BLURB | cut -f2- -d=)"
169 fi
170 return 0
171 fi
172 }
173
174 # checkwarnings [blurb]
175 # Returns "0" if the blurb was found (meaning there was an warning),
176 # returns 1 if it wasn't (yes this is a little backwards).
177 # Does not print the blurb on stdout.
178 # Otherwise, returns "".
179 checkwarnings ()
180 {
181 if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
182 return 1
183 fi
184 # Take the last line in the status file if there's multiple matches
185 PATTERN="^$1(:.*)?$"
186 BLURB="$(egrep $PATTERN "$ABCDETEMPDIR/warnings" | tail -n 1)"
187
188 if [ -z "$BLURB" ]; then
189 # negative, we did not have a negative...
190 return 1
191 else
192 # affirmative, we had a negative...
193 return 0
194 fi
195 }
196
197 # checkerrors [blurb]
198 # Returns "0" if the blurb was found (meaning there was an error),
199 # returns 1 if it wasn't (yes this is a little backwards).
200 # Does not print the blurb on stdout.
201 # Otherwise, returns "".
202 checkerrors ()
203 {
204 if [ -e "$ABCDETEMPDIR/errors" ]; then :; else
205 return 1
206 fi
207 # Take the last line in the status file if there's multiple matches
208 PATTERN="^$1(:.*)?$"
209 BLURB="$(egrep $PATTERN "$ABCDETEMPDIR/errors" | tail -n 1)"
210
211 if [ -z "$BLURB" ]; then
212 # negative, we did not have a negative...
213 return 1
214 else
215 # affirmative, we had a negative...
216 return 0
217 fi
218 }
219
220 # page [file]
221 # Finds the right pager in the system to display a file
222 page ()
223 {
224 PAGEFILE="$1"
225 # Use the debian sensible-pager wrapper to pick the pager
226 # user has requested via their $PAGER environment variable
227 if [ -x "/usr/bin/sensible-pager" ]; then
228 /usr/bin/sensible-pager "$PAGEFILE"
229 elif [ -x "$PAGER" ]; then
230 # That failed, try to load the preferred editor, starting
231 # with their PAGER variable
232 $PAGER "$PAGEFILE"
233 # If that fails, check for less
234 elif [ -x /usr/bin/less ]; then
235 /usr/bin/less -f "$PAGEFILE"
236 # more should be on all UNIX systems
237 elif [ -x /bin/more ]; then
238 /bin/more "$PAGEFILE"
239 else
240 # No bananas, just cat the thing
241 cat "$PAGEFILE" >&2
242 fi
243 }
244
245 # run_command [blurb] [command...]
246 # Runs a command, silently if necessary, and updates the status file
247 run_command ()
248 {
249 BLURB="$1"
250 shift
251 # See if this is supposed to be silent
252 if [ "$(checkstatus encode-output)" = "loud" ]; then
253 "$@" >&2
254 RETURN=$?
255 else
256 # Special case for SMP, since
257 # encoder output is never displayed, don't mute echos
258 if [ -z "$BLURB" -a "$MAXPROCS" != "1" ]; then
259 "$@" >&2
260 RETURN=$?
261 else
262 "$@" >/dev/null 2>&1
263 RETURN=$?
264 fi
265 fi
266 case "$1" in
267 normalize|normalize-audio)
268 if [ "$RETURN" = "2" ]; then
269 # File was already normalized.
270 RETURN=0
271 fi
272 ;;
273 esac
274 if [ "$RETURN" != "0" ]; then
275 # Put an error in the errors file. For various reasons we
276 # can't capture a copy of the program's output but we can
277 # log what we attempted to execute and the error code
278 # returned by the program.
279 if [ "$BLURB" ]; then
280 TWEAK="$BLURB: "
281 fi
282 echo "${TWEAK}returned code $RETURN: $@" >> "$ABCDETEMPDIR/errors"
283 return $RETURN # Do not pass go, do not update the status file
284 fi
285 if [ "$BLURB" ]; then
286 echo $BLURB >> "$ABCDETEMPDIR/status"
287 fi
288 }
289
290 # relpath() and slash() are Copyright (c) 1999 Stuart Ballard and
291 # distributed under the terms of the GNU GPL v2 or later, at your option
292
293 # Function to determine if a word contains a slash.
294 slash ()
295 {
296 case "$1" in
297 */*) return 0;;
298 *) return 1;;
299 esac
300 }
301
302 # Function to give the relative path from one file to another.
303 # Usage: relpath fromfile tofile
304 # eg relpath music/Artist/Album.m3u music/Artist/Album/Song.mp3
305 # (the result would be Album/Song.mp3)
306 # Output is relative path to $2 from $1 on stdout
307
308 # This code has the following restrictions:
309 # Multiple ////s are not collapsed into single /s, with strange effects.
310 # Absolute paths and ../s are handled wrong in FR (but they work in TO)
311 # If FR is a directory it must have a trailing /
312
313 relpath ()
314 {
315 FR="$1"
316 TO="$2"
317
318 case "$TO" in
319 /*) ;; # No processing is needed for absolute paths
320 *)
321 # Loop through common prefixes, ignoring them.
322 while slash "$FR" && [ "$(echo "$FR" | cut -d/ -f1)" = "$(echo "$TO" | cut -d/ -f1)" ]
323 do
324 FR="$(echo "$FR" | cut -d/ -f2-)"
325 TO="$(echo "$TO" | cut -d/ -f2-)"
326 done
327 # Loop through directory portions left in FR, adding appropriate ../s.
328 while slash "$FR"
329 do
330 FR="$(echo "$FR" | cut -d/ -f2-)"
331 TO="../$TO"
332 done
333 ;;
334 esac
335
336 echo $TO
337 }
338
339 new_checkexec ()
340 {
341 if [ ! "$@" = "" ]; then
342 # Cut off any command-line option we added in
343 X=$(echo $@ | cut -d' ' -f2)
344 if [ "$(which $X)" = "" ]; then
345 return 1
346 elif [ ! -x $(which $X) ]; then
347 return 2
348 fi
349 fi
350 return 0
351 }
352
353 checkexec ()
354 {
355 if [ ! "$@" = "" ]; then
356 # Cut off any command-line option we added in
357 X=$(echo $@ | cut -d' ' -f2)
358 # Test for built-in abcde.function
359 [ "$X" != "${X#abcde.}" ] && type $X >/dev/null 2>&1 && return
360 if [ "$(which $X)" = "" ]; then
361 log error "$X is not in your path." >&2
362 log info "Define the full path to the executable if it exists on your system." >&2
363 if [ -e /etc/debian_release ] ; then
364 case $X in
365 oggenc) MISSING_PACKAGE=vorbis-tools ;;
366 lame|flac) MISSING_PACKAGE=$X ;;
367 esac
368 log info "Hint: apt-get install $MISSING_PACKAGE" >&2
369 fi
370 exit 1
371 elif [ ! -x "$(which $X)" ]; then
372 log error "$X is not executable." >&2
373 exit 1
374 fi
375 fi
376 }
377
378 # diffentries <filename> <max_value> <entry1>,<entry2>
379 # max_value: the range of entries goes from 1 to <max_value>
380 diffentries ()
381 {
382 FILENAME=$1
383 shift
384 local CDDBDIFFCHOICES=$1
385 shift
386 local CDDBDIFFCHOICE="$@"
387 if [ ! X"$DIFF" = "X" ]; then
388 PARSECHOICE1=$(echo $CDDBDIFFCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
389 PARSECHOICE2=$(echo $CDDBDIFFCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
390 if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBDIFFCHOICES ] || \
391 [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBDIFFCHOICES ] || \
392 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
393 echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBDIFFCHOICES" >&2
394 else
395 # We parse the 2 choices to diff, store them in temporary files and diff them.
396 for PARSECHOICE in $(echo $CDDBDIFFCHOICE | tr , \ ); do
397 do_cddbparse "$ABCDETEMPDIR/$FILENAME.$PARSECHOICE" > "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE"
398 done
399 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/$FILENAME.diff"
400 $DIFF $DIFFOPTS "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/$FILENAME.diff"
401 if [ $(cat "$ABCDETEMPDIR/$FILENAME.diff" | wc -l) -ge 24 ]; then
402 page "$ABCDETEMPDIR/$FILENAME.diff"
403 else
404 cat "$ABCDETEMPDIR/$FILENAME.diff" >&2
405 fi
406 fi
407 else
408 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBDIFFCHOICES." >&2
409 fi
410 }
411
412 # getcddbinfo
413 # Finds an specific field from cddbinfo
414 getcddbinfo()
415 {
416 case $1 in
417 TRACKNAME1)
418 TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
419 ;;
420 TRACKNAME)
421 TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
422 ;;
423 TRACK-INFO)
424 grep ^EXTT$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | perl -p -e 's/\\n/\n/;'
425 ;;
426 esac
427 }
428
429 # gettracknum
430 # Get the track number we are going to use for different actions
431 gettracknum()
432 {
433 if [ -n "$STARTTRACKNUMBER" ] ; then
434 # Get the trackpadding from the current track
435 CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
436 TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
437 else
438 TRACKNUM=${UTRACKNUM}
439 fi
440 }
441
442 # makeids
443 #
444 # Calculate cddb disc ids without requiring specialized helper programs.
445 # largely copied from cd-discid and musicbrainz examples. some of the steps
446 # don't make sense, but they're necessary to match the ids generated by other
447 # programs.
448 #
449 ## FIXME ## Right now, we get 2 frames more than with cue2discid ??
450 # data@petit:~$ sh /tmp/cue2discid /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac
451 # processing offsetimes 00:00:00 04:47:10 08:20:37 11:46:46 17:45:36 21:41:57 27:32:21 32:03:73 35:39:28 38:27:33 43:50:38 44:42:34
452 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2895
453 # data@petit:~$ metaflac --export-cuesheet-to=- /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac| python /home/data/sources/abcde/trunk/examples/cue2discid
454 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2893
455 #
456 # Variables: OFFSETS, TRACKS, LEADOUT, [LEADIN]
457 makeids ()
458 {
459 if [ X"$LEADOUT" = "X" ]; then
460 log warning "Error trying to calculate disc ids without lead-out information."
461 exit 1
462 fi
463
464 # default to a two second lead-in
465 IDMAGICNUM=150
466 LEADIN=${LEADIN:=150}
467
468 # number of cdframes per second
469 CDFRAMES=75
470
471 # reset cddb checksum for cddb disc-id calululation
472 CDDBCKSUM=0
473
474 COOKEDOFFSETS=""
475 for OFFSET in $(echo $OFFSETS)
476 do
477 COOKEDOFFSETS="${COOKEDOFFSETS} $(($OFFSET + $LEADIN))"
478
479 OFFSETTIME=$(( ($OFFSET + $LEADIN) / $CDFRAMES ))
480 while [ $OFFSETTIME -gt 0 ]; do
481 CDDBCKSUM=$(($CDDBCKSUM + $OFFSETTIME % 10))
482 OFFSETTIME=$(($OFFSETTIME / 10))
483 done
484
485 done
486
487 COOKEDOFFSETS="${COOKEDOFFSETS:1}" # eat the leading space
488
489 PREGAP=$(($(echo $OFFSETS | cut -f1 -d' ')))
490 TOTALTIME=$(( (($LEADOUT + $LEADIN + $PREGAP) / $CDFRAMES) - (($LEADIN + $PREGAP) / $CDFRAMES)))
491
492 printf -v HEXSUM "%08lx" $(( ($CDDBCKSUM % 0xff) << 24 | $TOTALTIME << 8 | $TRACKS))
493 TRACKINFO="${HEXSUM} $((TRACKS)) ${COOKEDOFFSETS} $((($LEADOUT + $LEADIN + $IDMAGICNUM) / $CDFRAMES))"
494 }
495
496 do_replaygain()
497 {
498 if checkstatus replaygain; then :; else
499 run_command "" echo "Adding replaygain information..."
500 for TMPOUTPUT in $( echo $OUTPUTTYPE | tr , \ )
501 do
502 case $TMPOUTPUT in
503 vorbis|ogg)
504 OUTPUT=$OGGOUTPUTCONTAINER
505 ;;
506 flac)
507 OUTPUT=$FLACOUTPUTCONTAINER
508 ;;
509 *)
510 OUTPUT=$TMPOUTPUT
511 ;;
512 esac
513 OUTPUTFILES=""
514 REPLAYINDEX=0
515 for UTRACKNUM in $TRACKQUEUE
516 do
517 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
518 getcddbinfo TRACKNAME
519 splitvarious
520 TRACKFILE="$(mungefilename "$TRACKNAME")"
521 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
522 ALBUMFILE="$(mungefilename "$DALBUM")"
523 GENRE="$(mungegenre "$GENRE")"
524 YEAR=${CDYEAR:-$CDYEAR}
525 gettracknum
526 if [ "$ONETRACK" = "y" ]; then
527 if [ "$VARIOUSARTISTS" = "y" ]; then
528 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
529 else
530 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
531 fi
532 else
533 if [ "$VARIOUSARTISTS" = "y" ]; then
534 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
535 else
536 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
537 fi
538 fi
539 OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
540 (( REPLAYINDEX = $REPLAYINDEX + 1 ))
541 done
542 case "$OUTPUT" in
543 flac)
544 run_command replaygain-flac nice $ENCNICE $METAFLAC $FLACGAINOPTS "${OUTPUTFILES[@]}"
545 #run_command replaygain-flac true
546 ;;
547 vorbis|ogg)
548 run_command replaygain-vorbis nice $ENCNICE $VORBISGAIN $VORBISGAINOPTS "${OUTPUTFILES[@]}"
549 ;;
550 mp3)
551 run_command replaygain-mp3 nice $ENCNICE $MP3GAIN $MP3GAINOPTS "${OUTPUTFILES[@]}"
552 ;;
553 mpc)
554 run_command replaygain-mpc nice $ENCNICE $MPPGAIN --auto "${OUTPUTFILES[@]}"
555 ;;
556 *);;
557 esac
558 done
559 if checkerrors "replaygain-.{3,6}"; then :; else
560 run_command replaygain true
561 fi
562 fi
563 }
564
565 # This code splits the a Various Artist track name from one of the following
566 # forms:
567 #
568 # forward: Artist / Track
569 # forward-dash: Artist - Track
570 # reverse: Track / Artist
571 # reverse-dash: Track - Artist
572 # colon: Artist: Track
573 # trailing-paren: Artist (Track)
574 #
575 # variables used:
576 # VARIOUSARTISTS, VARIOUSARTISTSTYLE, TRACKNAME, TRACKARTIST
577 splitvarious ()
578 {
579 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
580 case "$VARIOUSARTISTSTYLE" in
581 forward)
582 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
583 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
584 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
585 ;;
586 forward-dash)
587 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
588 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
589 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
590 ;;
591 reverse)
592 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
593 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
594 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
595 ;;
596 reverse-dash)
597 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
598 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
599 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
600 ;;
601 colon)
602 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's-: -~-g')"
603 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
604 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
605 ;;
606 trailing-paren)
607 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
608 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
609 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
610 ;;
611 esac
612 elif [ "$VARIOUSARTISTS" = "y" ] && [ "$ONETRACK" = "y" ]; then
613 TRACKARTIST="Various"
614 else
615 TRACKARTIST="$DARTIST"
616 fi
617 }
618
619 do_getgenreid () {
620 local genre=$(echo "${@}" | tr '[A-Z]' '[a-z]')
621 local id=""
622 case ${genre} in
623 "blues") id=0 ;;
624 "classic rock") id=1 ;;
625 "country") id=2 ;;
626 "dance") id=3 ;;
627 "disco") id=4 ;;
628 "funk") id=5 ;;
629 "grunge") id=6 ;;
630 "hip-hop") id=7 ;;
631 "jazz") id=8 ;;
632 "metal") id=9 ;;
633 "new age") id=10 ;;
634 "oldies") id=11 ;;
635 "other") id=12 ;;
636 "pop") id=13 ;;
637 "r&b") id=14 ;;
638 "rap") id=15 ;;
639 "reggae") id=16 ;;
640 "rock") id=17 ;;
641 "techno") id=18 ;;
642 "industrial") id=19 ;;
643 "alternative") id=20 ;;
644 "ska") id=21 ;;
645 "death metal") id=22 ;;
646 "pranks") id=23 ;;
647 "soundtrack") id=24 ;;
648 "euro-techno") id=25 ;;
649 "ambient") id=26 ;;
650 "trip-hop") id=27 ;;
651 "vocal") id=28 ;;
652 "jazz+funk") id=29 ;;
653 "fusion") id=30 ;;
654 "trance") id=31 ;;
655 "classical") id=32 ;;
656 "instrumental") id=33 ;;
657 "acid") id=34 ;;
658 "house") id=35 ;;
659 "game") id=36 ;;
660 "sound clip") id=37 ;;
661 "gospel") id=38 ;;
662 "noise") id=39 ;;
663 "alt. rock") id=40 ;;
664 "bass") id=41 ;;
665 "soul") id=42 ;;
666 "punk") id=43 ;;
667 "space") id=44 ;;
668 "meditative") id=45 ;;
669 "instrum. pop") id=46 ;;
670 "instrum. rock") id=47 ;;
671 "ethnic") id=48 ;;
672 "gothic") id=49 ;;
673 "darkwave") id=50 ;;
674 "techno-indust.") id=51 ;;
675 "electronic") id=52 ;;
676 "pop-folk") id=53 ;;
677 "eurodance") id=54 ;;
678 "dream") id=55 ;;
679 "southern rock") id=56 ;;
680 "comedy") id=57 ;;
681 "cult") id=58 ;;
682 "gangsta") id=59 ;;
683 "top 40") id=60 ;;
684 "christian rap") id=61 ;;
685 "pop/funk"|"pop / funk") id=62 ;;
686 "jungle") id=63 ;;
687 "native american") id=64 ;;
688 "cabaret") id=65 ;;
689 "new wave") id=66 ;;
690 "psychadelic") id=67 ;;
691 "rave") id=68 ;;
692 "showtunes") id=69 ;;
693 "trailer") id=70 ;;
694 "lo-fi") id=71 ;;
695 "tribal") id=72 ;;
696 "acid punk") id=73 ;;
697 "acid jazz") id=74 ;;
698 "polka") id=75 ;;
699 "retro") id=76 ;;
700 "musical") id=77 ;;
701 "rock & roll") id=78 ;;
702 "hard rock") id=79 ;;
703 "folk") id=80 ;;
704 "folk/rock") id=81 ;;
705 "national folk") id=82 ;;
706 "swing") id=83 ;;
707 "fusion") id=84 ;;
708 "bebob") id=85 ;;
709 "latin") id=86 ;;
710 "revival") id=87 ;;
711 "celtic") id=88 ;;
712 "bluegrass") id=89 ;;
713 "avantgarde") id=90 ;;
714 "gothic rock") id=91 ;;
715 "progress. rock") id=92 ;;
716 "psychadel. rock") id=93 ;;
717 "symphonic rock") id=94 ;;
718 "slow rock") id=95 ;;
719 "big band") id=96 ;;
720 "chorus") id=97 ;;
721 "easy listening") id=98 ;;
722 "acoustic") id=99 ;;
723 "humour") id=100 ;;
724 "speech") id=101 ;;
725 "chanson") id=102 ;;
726 "opera") id=103 ;;
727 "chamber music") id=104 ;;
728 "sonata") id=105 ;;
729 "symphony") id=106 ;;
730 "booty bass") id=107 ;;
731 "primus") id=108 ;;
732 "porn groove") id=109 ;;
733 "satire") id=110 ;;
734 "slow jam") id=111 ;;
735 "club") id=112 ;;
736 "tango") id=113 ;;
737 "samba") id=114 ;;
738 "folklore") id=115 ;;
739 "ballad") id=116 ;;
740 "power ballad") id=117 ;;
741 "rhythmic soul") id=118 ;;
742 "freestyle") id=119 ;;
743 "duet") id=120 ;;
744 "punk rock") id=121 ;;
745 "drum solo") id=122 ;;
746 "a capella") id=123 ;;
747 "euro-house") id=124 ;;
748 "dance hall") id=125 ;;
749 "goa") id=126 ;;
750 "drum & bass") id=127 ;;
751 "club-house") id=128 ;;
752 "hardcore") id=129 ;;
753 "terror") id=130 ;;
754 "indie") id=131 ;;
755 "britpop") id=132 ;;
756 "negerpunk") id=133 ;;
757 "polsk punk") id=134 ;;
758 "beat") id=135 ;;
759 "christian gangsta rap") id=136 ;;
760 "heavy metal") id=137 ;;
761 "black metal") id=138 ;;
762 "crossover") id=139 ;;
763 "contemporary christian")id=140 ;;
764 "christian rock") id=141 ;;
765 "merengue") id=142 ;;
766 "salsa") id=143 ;;
767 "thrash metal") id=144 ;;
768 "anime") id=145 ;;
769 "jpop") id=146 ;;
770 "synthpop") id=147 ;;
771 "rock/pop"|"rock / pop") id=148 ;;
772 *) return 1 ;;
773 esac
774 echo ${id}
775 return 0
776 }
777
778 # do_tag [tracknumber]
779 # id3 tags a filename
780 # variables used:
781 # TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC, ATOMICPARSLEY
782 # COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE (and temporarily) ID3TAGV
783 do_tag ()
784 {
785 COMMENTOUTPUT="$(eval echo ${COMMENT})"
786 if [ -z "$COMMENTOUTPUT" ]; then
787 COMMENTOUTPUT="$(getcddbinfo TRACK-INFO)"
788 fi
789 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
790 run_command '' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
791 # If we want to start the tracks with a given number, we need to modify the
792 # TRACKNUM value before evaluation
793 if [ -n "$STARTTRACKNUMBERTAG" ] ; then
794 gettracknum
795 fi
796 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
797 do
798 case "$OUTPUT" in
799 mp3)
800 # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
801 GENREID=$(do_getgenreid "${CDGENRE}")
802 # Set TPE2 in case we have a Various Artists rip.
803 TPE2=""
804 if [ "$VARIOUSARTISTS" = "y" ]; then
805 TPE2="Various"
806 fi
807
808 case "$ID3SYNTAX" in
809 id3);;
810 eyed3)
811 # FIXME # track numbers in mp3 come with 1/10, so we cannot
812 # happily substitute them with $TRACKNUM
813 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $TAGGER $TAGGEROPTS \
814 --comment=::"$COMMENTOUTPUT" -A "$DALBUM" \
815 -a "$TRACKARTIST" -t "$TRACKNAME" -Y "$CDYEAR" \
816 -G "$GENREID" -n "${TRACKNUM:-$1}" \
817 "${TRACKNUM:+-N $TRACKS}" \
818 "${ENCODING:+--set-encoding=$ENCODING}" \
819 "${TPE2:+--set-user-text-frame=TPE2:$TPE2}" \
820 "$ABCDETEMPDIR/track$1.$OUTPUT"
821 ;;
822 # FIXME # Still not activated...
823 id3ed)
824 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
825 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
826 -a "$DALBUM" -n "$TRACKARTIST" -s "$TRACKNAME" \
827 -y "$CDYEAR" -g "$GENREID" -k "${TRACKNUM:-$1}" \
828 "$ABCDETEMPDIR/track$1.$OUTPUT"
829 ;;
830 *)
831 # FIXME # track numbers in mp3 come with 1/10, so we cannot
832 # happily substitute them with $TRACKNUM
833 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
834 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
835 -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" \
836 -y "$CDYEAR" -g "$GENREID" \
837 -T "${TRACKNUM:-$1}/$TRACKS" \
838 "${TPE2:+--TPE2 \"$TPE2\"}" \
839 "$ABCDETEMPDIR/track$1.$OUTPUT"
840 ;;
841 esac
842 ;;
843 vorbis|ogg)
844 case "$OGGENCODERSYNTAX" in
845 vorbize|oggenc)
846 # vorbiscomment can't do in-place modification, mv the file first
847 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" ]; then
848 mv "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
849 fi
850 (
851 # These are from
852 # http://www.xiph.org/ogg/vorbis/doc/v-comment.html
853
854 echo ARTIST="$TRACKARTIST"
855 echo ALBUM="$DALBUM"
856 echo TITLE="$TRACKNAME"
857 if [ -n "$CDYEAR" ]; then
858 echo DATE="$CDYEAR"
859 fi
860 if [ -n "$CDGENRE" ]; then
861 echo GENRE="$CDGENRE"
862 fi
863 echo TRACKNUMBER=${TRACKNUM:-$1}
864 if [ -n "$DISCNUMBER" ]; then
865 echo DISCNUMBER="$DISCNUMBER"
866 fi
867 echo CDDB=$CDDBDISCID
868 if [ "$(eval echo ${COMMENT})" != "" ]; then
869 case "$COMMENTOUTPUT" in
870 *=*) echo "$COMMENTOUTPUT";;
871 *) echo COMMENT="$COMMENTOUTPUT";;
872 esac
873 fi
874 ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
875 $VORBISCOMMENT $VORBISCOMMENTOPTS -w \
876 "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
877 # Doublecheck that the commented file was created
878 # successfully before wiping the original
879 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" ]; then
880 rm -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
881 else
882 mv "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
883 fi
884 ;;
885 esac
886 ;;
887 flac)
888 (
889 echo ARTIST="$TRACKARTIST"
890 echo ALBUM="$DALBUM"
891 echo TITLE="$TRACKNAME"
892 if [ -n "$CDYEAR" ]; then
893 echo DATE="$CDYEAR"
894 fi
895 if [ -n "$CDGENRE" ]; then
896 echo GENRE="$CDGENRE"
897 fi
898 echo TRACKNUMBER="${TRACKNUM:-$1}"
899 if [ -n "$DISCNUMBER" ]; then
900 echo DISCNUMBER="$DISCNUMBER"
901 fi
902 echo CDDB="$CDDBDISCID"
903 if [ "$(eval echo ${COMMENT})" != "" ]; then
904 case "$COMMENTOUTPUT" in
905 *=*) echo "$COMMENTOUTPUT";;
906 *) echo COMMENT="$COMMENTOUTPUT";;
907 esac
908 fi
909 ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
910 ;;
911 spx)
912 run_command tagtrack-$OUTPUT-$1 true
913 ;;
914 mpc)
915 run_command tagtrack-$OUTPUT-$1 true
916 ;;
917 m4a)
918 # Use a temp-file of our choice. --overWrite seems to
919 # case core dumps with AtomicParsley 0.9.0
920 ATOMICTEMPFILE="$ABCDETEMPDIR/track$1.m4a-atomic"
921
922 VARIOUSBOOL="false"
923 if [ "$VARIOUSARTISTS" = "y" ]; then
924 VARIOUSBOOL="true"
925 fi
926
927 #It has to be command file opts for AtomicParsley
928 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $ATOMICPARSLEY $ABCDETEMPDIR/track$1.m4a --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --tracknum ${TRACKNUM:-$1} --year "$CDYEAR" --genre "$CDGENRE" --compilation $VARIOUSBOOL --comment "$COMMENTOUTPUT" --output $ATOMICTEMPFILE
929 if [ -f $ATOMICTEMPFILE ]; then
930 mv "$ATOMICTEMPFILE" "$ABCDETEMPDIR/track$1.m4a"
931 fi
932 ;;
933 wav)
934 run_command tagtrack-$OUTPUT-$1 true
935 ;;
936 esac
937 done
938 if checkerrors "tagtrack-(.{3,6})-$1"; then :; else
939 run_command tagtrack-$1 true
940 fi
941
942 }
943
944 # do_nogap_encode
945 # variables used:
946 # OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
947 do_nogap_encode ()
948 {
949 # The commands here don't go through run_command because they're never
950 # supposed to be silenced
951 echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
952 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
953 do
954 case "$OUTPUT" in
955 mp3)
956 case "$MP3ENCODERSYNTAX" in
957 lame|toolame)
958 (
959 cd "$ABCDETEMPDIR"
960 TRACKFILES=
961 for UTRACKNUM in $TRACKQUEUE
962 do
963 TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
964 done
965 nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
966 RETURN=$?
967 if [ "$RETURN" != "0" ]; then
968 echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
969 else
970 for UTRACKNUM in $TRACKQUEUE
971 do
972 run_command encodetrack-$OUTPUT-$UTRACKNUM true
973 #run_command encodetrack-$UTRACKNUM true
974 done
975 fi
976 )
977 ;;
978 esac
979 ;;
980 esac
981 done
982 if checkerrors "nogap-encode"; then :; else
983 if [ ! "$KEEPWAVS" = "y" ] ; then
984 if [ ! "$KEEPWAVS" = "move" ] ; then
985 rm -f "$IN"
986 fi
987 fi
988 fi
989 # Other encoders fall through to normal encoding as the tracks have not
990 # been entered in the status file.
991 }
992
993 # do_encode [tracknumber] [hostname]
994 # If no hostname is specified, encode locally
995 # variables used:
996 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
997 do_encode ()
998 {
999 if [ "$USEPIPES" = "y" ]; then
1000 case "$OUTPUT" in
1001 mp3)
1002 TEMPARG="PIPE_$MP3ENCODERSYNTAX"
1003 ;;
1004 vorbis|ogg)
1005 TEMPARG="PIPE_$OGGENCODERSYNTAX"
1006 ;;
1007 flac)
1008 TEMPARG="PIPE_$FLACENCODERSYNTAX"
1009 ;;
1010 spx)
1011 TEMPARG="PIPE_$SPEEXENCODER"
1012 ;;
1013 mpc)
1014 TEMPARG="PIPE_$MPPENCODER"
1015 ;;
1016 m4a)
1017 TEMPARG="PIPE_$MPPENCODER"
1018 ;;
1019 esac
1020 IN="$( eval echo "\$$TEMPARG" )"
1021 else
1022 IN="$ABCDETEMPDIR/track$1.wav"
1023 case "$OUTPUT" in
1024 mp3)
1025 case "$MP3ENCODERSYNTAX" in
1026 # FIXME # check if mp3enc needs -if for pipes
1027 # FIXME # I have not been able to find a working mp3enc binary
1028 mp3enc)
1029 FILEARG="-if $IN"
1030 ;;
1031 *)
1032 FILEARG="$IN"
1033 ;;
1034 esac
1035 ;;
1036 *)
1037 FILEARG="$IN"
1038 ;;
1039 esac
1040 fi
1041 # We need IN to proceed, if we are not using pipes.
1042 if [ -s "$IN" -o X"$USEPIPES" = "Xy" ] ; then
1043 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1044 do
1045 case "$TMPOUTPUT" in
1046 vorbis|ogg)
1047 OUTPUT=$OGGOUTPUTCONTAINER
1048 ;;
1049 flac)
1050 OUTPUT=$FLACOUTPUTCONTAINER
1051 ;;
1052 *)
1053 OUTPUT=$TMPOUTPUT
1054 ;;
1055 esac
1056 OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1057 if [ "$NOGAP" = "y" ] && checkstatus encodetrack-$OUTPUT-$1 ; then
1058 continue
1059 fi
1060 if [ X"$USEPIPES" = "Xy" ]; then
1061 RUN_COMMAND=""
1062 # We need a way to store the creation of the files when using PIPES
1063 RUN_COMMAND_PIPES="run_command encodetrack-$OUTPUT-$1 true"
1064 # When pipping it does not make sense to have a higher nice for
1065 # reading than for encoding, since it will be hold by the
1066 # encoding process. Setting an effective nice, to calm down a
1067 # bit the reading process.
1068 EFFECTIVE_NICE=$READNICE
1069 else
1070 run_command '' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
1071 RUN_COMMAND="run_command encodetrack-$OUTPUT-$1"
1072 EFFECTIVE_NICE=$ENCNICE
1073 fi
1074 case "$OUTPUT" in
1075 mp3)
1076 case "$2" in
1077 %local*%)
1078 case "$MP3ENCODERSYNTAX" in
1079 lame|toolame|gogo) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
1080 bladeenc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
1081 l3enc|xingmp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
1082 # FIXME # Relates to the previous FIXME since it might need the "-if" removed.
1083 mp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
1084 esac
1085 ;;
1086 *)
1087 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
1088 ;;
1089 esac
1090 ;;
1091 vorbis|ogg)
1092 case "$2" in
1093 %local*%)
1094 case "$OGGENCODERSYNTAX" in
1095 vorbize) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
1096 oggenc) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
1097 esac
1098 ;;
1099 *)
1100 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
1101 ;;
1102 esac
1103 ;;
1104 flac)
1105 case "$2" in
1106 %local*%)
1107 case "$FLACENCODERSYNTAX" in
1108 flac) $RUN_COMMAND nice $EFFECTIVE_NICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
1109 esac
1110 ;;
1111 *)
1112 vecho -n "DISTMP3:"
1113 vecho "$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
1114 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev/null 2>&1
1115 ;;
1116 esac
1117 ;;
1118 spx)
1119 if [ "$(eval echo ${COMMENT})" != "" ]; then
1120 case "$COMMENT" in
1121 *=*) ;;
1122 *) COMMENT="COMMENT=$COMMENT" ;;
1123 esac
1124 COMMENT="--comment \"$COMMENT\""
1125 fi
1126 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1127 if [ ! "$DOTAG" = "y" ]; then
1128 $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" --comment "$COMMENT" "$IN" "$OUT"
1129 else
1130 $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
1131 fi
1132 ;;
1133 mpc)
1134 # MPP/MP+(Musepack) format (.mpc) is done locally, with inline
1135 # tagging.
1136 # I tried compiling the mppenc from corecodecs.org and got some
1137 # errors, so I have not tried it myself.
1138 ## FIXME ## Needs some cleanup to determine if an empty tag sent
1139 ## FIXME ## to the encoder ends up empty.
1140 $RUN_COMMAND nice $EFFECTIVE_NICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
1141 ;;
1142 m4a)
1143 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1144 if [ ! "$DOTAG" = "y" ]; then
1145 $RUN_COMMAND nice $EFFECTIVE_NICE $AACENCODER $AACENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -o "$OUT" "$IN"
1146
1147 else
1148 $RUN_COMMAND nice $ENCNICE $AACENCODER $AACENCODEROPTS -o "$OUT" "$IN"
1149 fi
1150 ;;
1151 wav)
1152 # In case of wav output we need nothing. Just keep the wavs.
1153 ;;
1154 esac
1155 $RUN_COMMAND_PIPES
1156 done
1157 # Only remove .wav if the encoding succeeded
1158 if checkerrors "encodetrack-(.{3,6})-$1"; then :; else
1159 run_command encodetrack-$1 true
1160 if [ ! "$KEEPWAVS" = "y" ] ; then
1161 if [ ! "$KEEPWAVS" = "move" ] ; then
1162 rm -f "$IN"
1163 fi
1164 fi
1165 fi
1166 else
1167 run_command "" echo "HEH! The file we were about to encode disappeared:"
1168 run_command "" echo ">> $IN"
1169 run_command encodetrack-$1 false
1170 fi
1171 }
1172
1173 # do_preprocess [tracknumber]
1174 # variables used:
1175 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1176 #do_preprocess ()
1177 #{
1178 # IN="$ABCDETEMPDIR/track$1.wav"
1179 # # We need IN to proceed.
1180 # if [ -s "$IN" ] ; then
1181 # for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1182 # do
1183 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1184 # run_command '' echo "Pre-processing track $1 of $TRACKS..."
1185 # case "$POSTPROCESSFORMAT" in
1186 # all|wav*)
1187 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $WAV_PRE $IF $OF ;;
1188 # mp3)
1189 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $MP3_PRE $IF $OF ;;
1190 # ogg)
1191 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $OGG_PRE $IF $OF ;;
1192 # flac)
1193 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $FLAC_PRE $IF $OF ;;
1194 # spx)
1195 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $SPX_PRE $IF $OF ;;
1196 # esac
1197 # done
1198 # # Only remove .wav if the encoding succeeded
1199 # if checkerrors "preprocess-(.{3,4})-$1"; then
1200 # run_command preprocess-$1 false
1201 # else
1202 # run_command preprocess-$1 true
1203 # fi
1204 # else
1205 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1206 # echo "HEH! The file we were about to pre-process disappeared:"
1207 # echo ">> $IN"
1208 # fi
1209 # run_command preprocess-$1 false
1210 # fi
1211 #}
1212
1213
1214 # do_postprocess [tracknumber]
1215 # variables used:
1216 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1217 #do_postprocess ()
1218 #{
1219 # for POSTPROCESSFORMAT in $(echo $POSTPROCESSFORMATS | tr , \ )
1220 # do
1221 # IN="$ABCDETEMPDIR/track$1.$POSTPROCESSFORMAT"
1222 # # We need IN to proceed.
1223 # if [ -s "$IN" ] ; then
1224 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1225 # run_command '' echo "Post-processing track $1 of $TRACKS..."
1226 # case "$POSTPROCESSFORMAT" in
1227 # mp3)
1228 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $MP3_POST $IF $OF ;;
1229 # ogg)
1230 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $OGG_POST $IF $OF ;;
1231 # flac)
1232 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $FLAC_POST $IF $OF ;;
1233 # spx)
1234 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $SPX_POST $IF $OF ;;
1235 # esac
1236 # # Only remove .wav if the encoding succeeded
1237 # if checkerrors "postprocess-(.{3,4})-$1"; then
1238 # run_command postprocess-$1 false
1239 # else
1240 # run_command postprocess-$1 true
1241 # fi
1242 # else
1243 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1244 # echo "HEH! The file we were about to post-process disappeared:"
1245 # echo ">> $IN"
1246 # fi
1247 # run_command postprocess-$1 false
1248 # fi
1249 # done
1250 #}
1251
1252 # do_single_gain
1253 # variables used:
1254 # FIXME #
1255 do_single_gain ()
1256 {
1257 :
1258 }
1259
1260 # do_batch_gain
1261 # variables used:
1262 # MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
1263 # FIXME #
1264 do_batch_gain ()
1265 {
1266 # The commands here don't go through run_command because they're never supposed to be silenced
1267 echo "Batch analizing gain in tracks: $TRACKQUEUE"
1268 (
1269 cd "$ABCDETEMPDIR"
1270 BLURB=
1271 TRACKFILES=
1272 for UTRACKNUM in $TRACKQUEUE
1273 do
1274 MP3FILES="$TRACKFILES track$UTRACKNUM.mp3"
1275 done
1276 # FIXME # Hard-coded batch option!
1277 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1278 RETURN=$?
1279 if [ "$RETURN" != "0" ]; then
1280 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1281 else
1282 for UTRACKNUM in $TRACKQUEUE
1283 do
1284 echo normalizetrack-$UTRACKNUM >> status
1285 done
1286 fi
1287 )
1288 }
1289
1290 # do_batch_normalize
1291 # variables used:
1292 # NORMALIZER, NORMALIZEROPTS
1293 do_batch_normalize ()
1294 {
1295 # The commands here don't go through run_command because they're never supposed to be silenced
1296 echo "Batch normalizing tracks: $TRACKQUEUE"
1297 (
1298 cd "$ABCDETEMPDIR"
1299 BLURB=
1300 TRACKFILES=
1301 for UTRACKNUM in $TRACKQUEUE
1302 do
1303 TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
1304 done
1305 # XXX: Hard-coded batch option!
1306 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1307 RETURN=$?
1308 if [ "$RETURN" != "0" ]; then
1309 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1310 else
1311 for UTRACKNUM in $TRACKQUEUE
1312 do
1313 echo normalizetrack-$UTRACKNUM >> status
1314 done
1315 fi
1316 )
1317 }
1318
1319 # do_normalize [tracknumber]
1320 # variables used:
1321 # TRACKS, TRACKNAME, NORMALIZER, NORMALIZEROPTS
1322 do_normalize ()
1323 {
1324 IN="$ABCDETEMPDIR/track$1.wav"
1325 if [ -e "$IN" ] ; then
1326 run_command '' echo "Normalizing track $1 of $TRACKS: $TRACKNAME..."
1327 run_command normalizetrack-$1 $NORMALIZER $NORMALIZEROPTS "$IN"
1328 else
1329 if [ "$(checkstatus encode-output)" = "loud" ]; then
1330 echo "HEH! The file we were about to normalize disappeared:"
1331 echo ">> $IN"
1332 fi
1333 run_command normalizetrack-$1 false "File $IN was not found"
1334 fi
1335 }
1336
1337 # do_move [tracknumber]
1338 # Deduces the outfile from environment variables
1339 # Creates directory if necessary
1340 # variables used:
1341 # TRACKNUM, TRACKNAME, TRACKARTIST, DALBUM, OUTPUTFORMAT, CDGENRE, CDYEAR
1342 do_move ()
1343 {
1344 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1345 do
1346 # For now, set OUTPUT as TMPOUTPUT, and then change it once we have
1347 # defined the OUTPUTFILE:
1348 OUTPUT="$TMPOUTPUT"
1349
1350 # Create ALBUMFILE, ARTISTFILE, TRACKFILE
1351 # Munge filenames as follows:
1352 # ' ' -> '_'
1353 # '/' -> '_'
1354 # ''' -> ''
1355 # '?' -> ''
1356 # Eat control characters
1357 ALBUMFILE="$(mungefilename "$DALBUM")"
1358 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1359 TRACKFILE="$(mungefilename "$TRACKNAME")"
1360 GENRE="$(mungegenre "$GENRE")"
1361 YEAR=${CDYEAR:-$CDYEAR}
1362 # If we want to start the tracks with a given number, we need to modify
1363 # the TRACKNUM value before evaluation
1364 gettracknum
1365 # Supported variables for OUTPUTFORMAT are GENRE, YEAR, ALBUMFILE,
1366 # ARTISTFILE, TRACKFILE, and TRACKNUM.
1367 if [ "$ONETRACK" = "y" ]; then
1368 if [ "$VARIOUSARTISTS" = "y" ]; then
1369 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
1370 else
1371 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
1372 fi
1373 else
1374 if [ "$VARIOUSARTISTS" = "y" ]; then
1375 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
1376 else
1377 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
1378 fi
1379 fi
1380 if checkerrors "tagtrack-$OUTPUT-$1"; then :; else
1381 # Once we know the specific output was successful, we can change
1382 # the OUTPUT to the value containing the container
1383 case $TMPOUTPUT in
1384 vorbis|ogg)
1385 OUTPUT=$OGGOUTPUTCONTAINER
1386 ;;
1387 flac)
1388 OUTPUT=$FLACOUTPUTCONTAINER
1389 ;;
1390 *)
1391 OUTPUT=$TMPOUTPUT
1392 ;;
1393 esac
1394 # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
1395 OUTPUTFILEDIR="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
1396 case $OUTPUT in
1397 wav)
1398 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1399 # FIXME # introduce warnings?
1400 :
1401 else
1402 # mkdir -p shouldn't return an error if the directory already exists
1403 mkdir -p "$OUTPUTFILEDIR"
1404 run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1405 if checkstatus movetrack-output-$OUTPUT; then :; else
1406 run_command movetrack-output-$OUTPUT true
1407 fi
1408 fi
1409 ;;
1410 *)
1411 # mkdir -p shouldn't return an error if the directory already exists
1412 mkdir -p "$OUTPUTFILEDIR"
1413 run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1414 if checkstatus movetrack-output-$OUTPUT; then :; else
1415 run_command movetrack-output-$OUTPUT true
1416 fi
1417 ;;
1418 esac
1419 # Lets move the cue file
1420 if CUEFILE=$(checkstatus cuefile) >/dev/null ; then
1421 if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
1422 if checkstatus movecue-$OUTPUT; then :; else
1423 # Silence the Copying output since it overlaps with encoding processes...
1424 #run_command '' vecho "Copying cue file to its destination directory..."
1425 if checkstatus onetrack >/dev/null ; then
1426 case $OUTPUT in
1427 wav)
1428 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1429 # We dont have the dir, since it was not created before.
1430 :
1431 else
1432 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1433 fi
1434 ;;
1435 # NOTE: Creating a cue file with the 3-char-extension files is to comply with
1436 # http://brianvictor.tripod.com/mp3cue.htm#details
1437 [a-z0-9][a-z0-9][a-z0-9])
1438 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1439 ;;
1440 *)
1441 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT.cue"
1442 ;;
1443 esac
1444 else
1445 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTFILEDIR/$CUEFILE"
1446 fi
1447 echo movecue-$OUTPUT >> "$ABCDETEMPDIR/status"
1448 fi
1449 fi
1450 fi
1451 fi
1452 done
1453 }
1454
1455 # do_playlist
1456 # Create the playlist if wanted
1457 # Variables used:
1458 # PLAYLISTFORMAT, PLAYLISTDATAPREFIX, VAPLAYLISTFORMAT, VAPLAYLISTDATAPREFIX,
1459 # VARIOUSARTISTS, OUTPUTDIR
1460 do_playlist ()
1461 {
1462 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1463 do
1464 case $TMPOUTPUT in
1465 vorbis|ogg)
1466 OUTPUT=$OGGOUTPUTCONTAINER
1467 ;;
1468 flac)
1469 OUTPUT=$FLACOUTPUTCONTAINER
1470 ;;
1471 *)
1472 OUTPUT=$TMPOUTPUT
1473 ;;
1474 esac
1475 # Create a playlist file for the playlist data to go into.
1476 # We used to wipe it out if it existed. Now we request permision if interactive.
1477 for LASTTRACK in $TRACKQUEUE; do :; done
1478 ALBUMFILE="$(mungefilename "$DALBUM")"
1479 ARTISTFILE="$(mungefilename "$DARTIST")"
1480 GENRE="$(mungegenre "$GENRE")"
1481 YEAR=${CDYEAR:-$CDYEAR}
1482 if [ "$VARIOUSARTISTS" = "y" ] ; then
1483 PLAYLISTFILE="$(eval echo "$VAPLAYLISTFORMAT")"
1484 else
1485 PLAYLISTFILE="$(eval echo "$PLAYLISTFORMAT")"
1486 fi
1487 FINALPLAYLISTDIR="$(dirname "$OUTPUTDIR/$PLAYLISTFILE")"
1488 mkdir -p "$FINALPLAYLISTDIR"
1489 if [ -s "$OUTPUTDIR/$PLAYLISTFILE" ]; then
1490 echo -n "Erase, Append to, or Keep the existing playlist file? [e/a/k] (e): " >&2
1491 if [ "$INTERACTIVE" = "y" ]; then
1492 while [ "$DONE" != "y" ]; do
1493 read ERASEPLAYLIST
1494 case $ERASEPLAYLIST in
1495 e|E|a|A|k|K) DONE=y ;;
1496 "") ERASEPLAYLIST=e ; DONE=y ;;
1497 *) ;;
1498 esac
1499 done
1500 else
1501 echo e >&2
1502 ERASEPLAYLIST=e
1503 fi
1504 # Once we erase the playlist, we use append to create the new one.
1505 [ "$ERASEPLAYLIST" = "e" -o "$ERASEPLAYLIST" = "E" ] && rm -f "$OUTPUTDIR/$PLAYLISTFILE" && ERASEPLAYLIST=a
1506 else
1507 # The playlist does not exist, so we can safelly use append to create the new list
1508 ERASEPLAYLIST=a
1509 fi
1510 if [ "$ERASEPLAYLIST" = "a" -o "$ERASEPLAYLIST" = "A" ]; then
1511 touch "$OUTPUTDIR/$PLAYLISTFILE"
1512 for UTRACKNUM in $TRACKQUEUE
1513 do
1514 # Shares some code with do_move since the filenames have to match
1515 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
1516 getcddbinfo TRACKNAME
1517 splitvarious
1518 TRACKFILE="$(mungefilename "$TRACKNAME")"
1519 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1520 ALBUMFILE="$(mungefilename "$DALBUM")"
1521 # If we want to start the tracks with a given number, we need to modify the
1522 # TRACKNUM value before evaluation
1523 gettracknum
1524 if [ "$VARIOUSARTISTS" = "y" ]; then
1525 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT\"")"
1526 else
1527 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT\"")"
1528 fi
1529 if [ "$VARIOUSARTISTS" = "y" ]; then
1530 if [ "$VAPLAYLISTDATAPREFIX" ] ; then
1531 echo ${VAPLAYLISTDATAPREFIX}$OUTPUTFILE.$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1532 else
1533 relpath "$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1534 fi
1535 else
1536 if [ "$PLAYLISTDATAPREFIX" ]; then
1537 echo ${PLAYLISTDATAPREFIX}$OUTPUTFILE.$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1538 else
1539 relpath "$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1540 fi
1541 fi
1542 done
1543 fi
1544 ## this will convert the playlist to have CRLF line-endings, if specified
1545 ## (some hardware players insist on CRLF endings)
1546 if [ "$DOSPLAYLIST" = "y" ]; then
1547 awk '{substr("\r",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
1548 # mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
1549 cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" | sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
1550 fi
1551 echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
1552 done
1553 }
1554
1555 # abcde.cue2discid
1556 # This function reads a cuefile on stdin and writes an extended
1557 # cddb query on stdout. Any PREGAP for track 1 is properly
1558 # handled, although cue files embedded in FLAC files do not
1559 # appear to properly store the PREGAP setting. :(
1560 abcde.cue2discid () {
1561
1562 cddb_sum () {
1563 val=$1
1564 ret=0
1565 while [ $val -gt 0 ] ; do
1566 ret=$(( $ret + ( $val % 10) ))
1567 val=$(( $val / 10 ))
1568 done
1569 echo $ret
1570 }
1571
1572 msf2lba () {
1573 OIFS="$IFS"
1574 IFS=":"
1575 set -- $1
1576 IFS="$OIFS"
1577 local first second third
1578 first=$(expr ${1} + 0 )
1579 second=$(expr ${2} + 0 )
1580 third=$(expr ${3} + 0 )
1581
1582 echo $(( ((($first * 60) + $second) * 75) + $third ))
1583 }
1584
1585 OFFSET=150
1586 PREGAP=0
1587 LEADOUT=0
1588 LEADIN=88200
1589 i=0
1590 N=0
1591
1592 while read line ; do
1593 set -- $line
1594 case "$1" in
1595 TRACK) i=$(( i + 1 ))
1596 ;;
1597 INDEX) if [ "$2" -eq 1 ] ; then
1598 LBA=$(msf2lba $3)
1599 START=$(( $LBA + $PREGAP + $OFFSET ))
1600 eval TRACK$i=$START
1601 X=$(cddb_sum $(( $START / 75 )) )
1602 N=$(( $N + $X ))
1603 fi
1604 ;;
1605 PREGAP) PREGAP=$(msf2lba $2)
1606 ;;
1607 REM) case "$2" in
1608 FLAC__lead-out)
1609 LEADOUT=$(( $4 / 588 ))
1610 ;;
1611 FLAC__lead-in)
1612 LEADIN=$(( $3 / 588 ))
1613 ;;
1614 esac
1615 ;;
1616 esac
1617
1618 done
1619
1620 TRACKS=$i
1621 LEADOUT=$(( $LEADOUT + $LEADIN ))
1622
1623 LENGTH=$(( $LEADOUT/75 - $TRACK1/75 ))
1624 DISCID=$(( ( $N % 255 ) * 2**24 | $LENGTH * 2**8 | $TRACKS ))
1625 printf "%08x %i" $DISCID $TRACKS
1626
1627 j=1
1628 while [ $j -le $TRACKS ] ; do
1629 eval echo -n "\" \$TRACK$j\""
1630 j=$((j+1))
1631 done
1632 echo " $(( $LEADOUT / 75 ))"
1633 }
1634
1635 # abcde.mkcue
1636 # abcde.mkcue [--wholedisk]
1637 # This creates a cuefile directly from the extended discid information
1638 # The --wholedisk option controls whether we're ripping data from the
1639 # start of track one or from the start of the disk (usually, but not
1640 # always the same thing!)
1641 #
1642 # Track one leadin/pregap (if any) handeling:
1643 # --wholedisk specified:
1644 # TRACK 01 AUDIO
1645 # INDEX 00 00:00:00
1646 # INDEX 01 <pregap value>
1647 # Remaining track index values unchanged from disc TOC
1648 #
1649 # --wholedisk not specified
1650 # TRACK 01 AUDIO
1651 # PREGAP <pregap value>
1652 # INDEX 01 00:00:00
1653 # Remaining track index values offset by <pregap value>
1654 #
1655 # Variables used:
1656 # TRACKINFO
1657 abcde.mkcue () {
1658
1659 echomsf () {
1660 printf "$1%02i:%02i:%02i\n" $(($2/4500)) $((($2/75)%60)) $(($2%75))
1661 }
1662
1663 local MODE DISCID TRACKS
1664 local i OFFSET LBA
1665
1666
1667 if [ "$1" = --wholedisc ] ; then
1668 MODE=INDEX
1669 else
1670 MODE=PREGAP
1671 fi
1672
1673 set -- $TRACKINFO
1674
1675 DISCID=$1
1676 TRACKS=$2
1677 shift 2
1678
1679 echo REM DISCID $DISCID
1680 echo FILE \"dummy.wav\" WAVE
1681
1682 if [ $1 -ne 150 ] && [ $MODE = "PREGAP" ] ; then
1683 OFFSET=$1
1684 else
1685 OFFSET=150
1686 fi
1687
1688 i=1
1689 while [ $i -le "$TRACKS" ] ; do
1690 LBA=$(( $1 - $OFFSET ))
1691 printf " TRACK %02i AUDIO\n" $i
1692 if [ $i -eq 1 -a $1 -ne 150 ] ; then
1693 if [ $MODE = PREGAP ] ; then
1694 echomsf " PREGAP " $(($OFFSET-150))
1695 else
1696 echo " INDEX 00 00:00:00"
1697 fi
1698 fi
1699 echomsf " INDEX 01 " $LBA
1700 i=$(($i+1))
1701 shift
1702 done
1703 }
1704
1705 # do_discid
1706 # This essentially the start of things
1707 do_discid ()
1708 {
1709 # Query the CD to get the track info, unless the user specified -C
1710 # or we are using some actions which do not need the CDDB data at all
1711 #if [ ! X"$EXPACTIONS" = "X" ]; then
1712 # :
1713 #elif [ -z "$DISCID" ]; then
1714 if [ -z "$DISCID" ]; then
1715 vecho -n "Getting CD track info... "
1716 # In OSX, unmount the disc before a query
1717 if [ "$OSFLAVOUR" = "OSX" ]; then
1718 disktool -u ${CDROM#/dev/}
1719 fi
1720 case "$CDROMREADERSYNTAX" in
1721 flac)
1722 if $METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" > /dev/null 2>&1 ; then
1723 case "$CUE2DISCID" in
1724 # FIXME # right now we have 2 cue2discid internal
1725 # implementations: builtin and abcde.cue2discid. Test
1726 # both of them and decide which one we want to use.
1727 builtin)
1728 #vecho "Using builtin cue2discid implementation..."
1729 CUESHEET="$(metaflac $METAFLACOPTS --export-cuesheet-to=- "$CDROM")"
1730
1731 #TRACKS=$(echo $CUESHEET | egrep "TRACK \+[[:digit:]]\+ \+AUDIO" |wc -l)
1732 #TRACKS=0
1733 OFFSETTIMES=( $(echo "$CUESHEET" | sed -n -e's/\ *INDEX 01\ \+//p' ) )
1734 TRACKS=${#OFFSETTIMES[@]}
1735 unset OFFSETS
1736 #echo "processing offsetimes ${OFFSETTIMES[@]}"
1737 for OFFSETTIME in ${OFFSETTIMES[@]}; do
1738 OFFSETS="$OFFSETS $(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))"
1739 #OFFSETS[${#OFFSETS[*]}]=$(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))
1740 done
1741
1742 LEADOUT=$(( $(echo "$CUESHEET" | grep lead-out | get_last) / 44100 * 75 ))
1743 LEADIN=$(( $(echo "$CUESHEET" | grep lead-in | get_last) / 44100 * 75 ))
1744 makeids
1745 ;;
1746 *)
1747 #vecho "Using external python cue2discid implementation..."
1748 TRACKINFO=$($METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" | $CUE2DISCID)
1749 ;;
1750 esac
1751 else
1752 log error "the input flac file does not contain a cuesheet."
1753 exit 1
1754 fi
1755 ;;
1756 # cdparanoia|debug)
1757 # CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1758 # RET=$?
1759 # if [ ! "$RET" = "0" ];then
1760 # log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1761 # fi
1762 #
1763 # TRACKS="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1764 # CDPARANOIAAUDIOTRACKS="$TRACKS"
1765 #
1766 # LEADOUT="$(echo "$CDPARANOIAOUTPUT" | egrep -o '^TOTAL[[:space:]]+([[:digit:]]+)' | get_last)"
1767 # OFFSETS="$(echo "$CDPARANOIAOUTPUT" | sed -n -e's/^ .* \([0-9]\+\) \[.*/\1/p')"
1768 # makeids
1769 # ;;
1770 *)
1771 case "$CDDBMETHOD" in
1772 cddb) TRACKINFO=$($CDDISCID "$CDROM") ;;
1773 # FIXME # musicbrainz needs a cleanup
1774 musicbrainz) TRACKINFO=$($MUSICBRAINZ -c "$CDROM" ) ;;
1775 esac
1776 ;;
1777 esac
1778 # Make sure there's a CD in there by checking cd-discid's return code
1779 if [ ! "$?" = "0" ]; then
1780 if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
1781 log error "cuesheet information from the flac file could not be read."
1782 log error "Perhaps the flac file does not contain a cuesheet?."
1783 exit 1
1784 else
1785 log error "CD could not be read. Perhaps there's no CD in the drive?"
1786 exit 1
1787 fi
1788 fi
1789 # In OSX, remount the disc again
1790 if [ "$OSFLAVOUR" = "OSX" ]; then
1791 disktool -m ${CDROM#/dev/}
1792 fi
1793 WEHAVEACD=y
1794 DISCID=$(echo $TRACKINFO | cut -f1 -d' ')
1795 else
1796 TRACKINFO=$(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
1797 fi
1798
1799 # Get a full enumeration of tracks, sort it, and put it in the TRACKQUEUE.
1800 # This needs to be done now because a section of the resuming code will need
1801 # it later.
1802
1803 # get the number of digits to pad TRACKNUM with - we'll use this later
1804 # a CD can only hold 99 tracks, but since we support a feature for starting
1805 # numbering the tracks from a given number, we might need to set it as a
1806 # variable for the user to define... or obtain it somehow.
1807 if [ "$PADTRACKS" = "y" ] ; then
1808 TRACKNUMPADDING=2
1809 fi
1810
1811 ABCDETEMPDIR="$WAVOUTPUTDIR/abcde.$(echo $TRACKINFO | cut -f1 -d' ')"
1812 if [ -z "$TRACKQUEUE" ]; then
1813 if [ ! "$STRIPDATATRACKS" = "n" ]; then
1814 case "$CDROMREADERSYNTAX" in
1815 cdparanoia|debug)
1816 if [ "$WEHAVEACD" = "y" ]; then
1817 vecho "Querying the CD for audio tracks..."
1818 CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1819 RET=$?
1820 if [ ! "$RET" = "0" ];then
1821 log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1822 fi
1823 TRACKS="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1824 CDPARANOIAAUDIOTRACKS="$TRACKS"
1825 else
1826 # Previous versions of abcde would store the tracks on a file, instead of the status record.
1827 if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
1828 echo cdparanoia-audio-tracks=$( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
1829 rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
1830 fi
1831 if [ -f "$ABCDETEMPDIR/status" ] && TRACKS=$(checkstatus cdparanoia-audio-tracks); then :; else
1832 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1833 fi
1834 fi
1835 ;;
1836 *) TRACKS=$(echo $TRACKINFO | cut -f2 -d' ') ;;
1837 esac
1838 else
1839 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1840 fi
1841 if echo "$TRACKS" | grep "[[:digit:]]" > /dev/null 2>&1 ;then :;else
1842 log info "The disc does not contain any tracks. Giving up..."
1843 exit 0
1844 fi
1845 echo -n "Grabbing entire CD - tracks: "
1846 if [ ! "$PADTRACKS" = "y" ] ; then
1847 TRACKNUMPADDING=$(echo -n $TRACKS | wc -c | tr -d ' ')
1848 fi
1849 TRACKS=$(printf "%0.${TRACKNUMPADDING}d" $TRACKS)
1850 X=0
1851 while [ "$X" -ne "$TRACKS" ]
1852 do
1853 X=$(printf "%0.${TRACKNUMPADDING}d" $(expr $X + 1))
1854 TRACKQUEUE=$(echo $TRACKQUEUE $X)
1855 done
1856 echo $TRACKQUEUE
1857 else
1858 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1859 # User-supplied track queue.
1860 # Weed out non-numbers, whitespace, then sort and weed out duplicates
1861 TRACKQUEUE=$(echo $TRACKQUEUE | sed 's-[^0-9 ]--g' | tr ' ' '\n' | grep -v ^$ | sort -n | uniq | tr '\n' ' ' | sed 's- $--g')
1862 # Once cleaned, obtain the highest value in the trackqueue for number padding
1863 for LASTTRACK in $TRACKQUEUE; do :; done
1864 if [ ! "$PADTRACKS" = "y" ] ; then
1865 TRACKNUMPADDING=$(echo -n $LASTTRACK | wc -c | tr -d ' ')
1866 fi
1867 # Now we normalize the trackqueue
1868 for TRACK in $TRACKQUEUE ; do
1869 TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
1870 PADTRACKQUEUE=$(echo $PADTRACKQUEUE $TRACKNUM)
1871 done
1872 TRACKQUEUE=$PADTRACKQUEUE
1873 echo Grabbing tracks: "$TRACKQUEUE"
1874 fi
1875
1876 QUEUEDTRACKS=$(echo $TRACKQUEUE | wc -w | tr -d ' ')
1877
1878 # We have the discid, create a temp directory after it to store all the temp
1879 # info
1880
1881 if [ -e "$ABCDETEMPDIR" ]; then
1882 echo -n "abcde: attempting to resume from $ABCDETEMPDIR"
1883 # It already exists, see if it's a directory
1884 if [ ! -d "$ABCDETEMPDIR" ]; then
1885 # This is a file/socket/fifo/device/etc, not a directory
1886 # Complain and exit
1887 echo >&2
1888 echo "abcde: file $ABCDETEMPDIR already exists and does not belong to abcde." >&2
1889 echo "Please investigate, remove it, and rerun abcde." >&2
1890 exit 1
1891 fi
1892 echo -n .
1893 # It's a directory, let's see if it's writable by us
1894 if [ ! -r "$ABCDETEMPDIR" ] || [ ! -w "$ABCDETEMPDIR" ] || [ ! -x "$ABCDETEMPDIR" ]; then
1895 # Nope, complain and exit
1896 echo >&2
1897 echo "abcde: directory $ABCDETEMPDIR already exists and is not writeable." >&2
1898 echo "Please investigate, remove it, and rerun abcde." >&2
1899 exit 1
1900 fi
1901 echo .
1902 # See if it's populated
1903 if [ ! -f "$ABCDETEMPDIR/discid" ]; then
1904 # Wipe and start fresh
1905 echo "abcde: $ABCDETEMPDIR/discid not found. Abcde must remove and recreate" >&2
1906 echo -n "this directory to continue. Continue? [y/n] (n)" >&2
1907 if [ "$INTERACTIVE" = "y" ]; then
1908 read ANSWER
1909 else
1910 echo y >&2
1911 ANSWER=y
1912 fi
1913 if [ "$ANSWER" != "y" ]; then
1914 exit 1
1915 fi
1916 rm -rf "$ABCDETEMPDIR" || exit 1
1917 mkdir -p "$ABCDETEMPDIR"
1918 if [ "$?" -gt "0" ]; then
1919 # Directory already exists or could not be created
1920 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1921 exit 1
1922 fi
1923 else
1924 # Everything is fine. Check for ^encodetracklocation-
1925 # and encode-output entries in the status file and
1926 # remove them. These are not relevant across sessions.
1927 if [ -f "$ABCDETEMPDIR/status" ]; then
1928 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
1929 grep -v ^encodetracklocation- < "$ABCDETEMPDIR/status.old" \
1930 | grep -v ^encode-output > "$ABCDETEMPDIR/status"
1931 fi
1932 # Remove old error messages
1933 if [ -f "$ABCDETEMPDIR/errors" ]; then
1934 rm -f "$ABCDETEMPDIR/errors"
1935 fi
1936 fi
1937 else
1938 # We are starting from scratch
1939 mkdir -p "$ABCDETEMPDIR"
1940 if [ "$?" -gt "0" ]; then
1941 # Directory already exists or could not be created
1942 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1943 exit 1
1944 fi
1945 cat /dev/null > "$ABCDETEMPDIR/status"
1946 # Store the abcde version in the status file.
1947 echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
1948 fi
1949 if [ X"$DOCUE" = "Xy" -a X"$WEHAVEACD" = "Xy" ]; then
1950 if checkstatus cuefile > /dev/null 2>&1 ; then :; else
1951 CUEFILE=cue-$(echo "$TRACKINFO" | cut -f1 -d' ').txt
1952 vecho "Creating cue file..."
1953 case $CDROMREADERSYNTAX in
1954 flac)
1955 if $METAFLAC --export-cuesheet-to=- "$CDROM" > "$ABCDETEMPDIR/$CUEFILE"; then
1956 echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
1957 else
1958 log warning "the input flac file does not contain a cuesheet."
1959 fi
1960 ;;
1961 *)
1962 if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
1963 echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
1964 else
1965 log warning "reading the CUE sheet is still considered experimental"
1966 log warning "and there was a problem with the CD reading. abcde will continue,"
1967 log warning "but consider reporting the problem to the abcde author"
1968 fi
1969 ;;
1970 esac
1971 fi
1972 fi
1973 # If we got the CDPARANOIA status and it is not recorded, save it now
1974 if [ -n "$CDPARANOIAAUDIOTRACKS" ]; then
1975 if checkstatus cdparanoia-audio-tracks > /dev/null 2>&1; then :; else
1976 echo cdparanoia-audio-tracks=$CDPARANOIAAUDIOTRACKS >> "$ABCDETEMPDIR/status"
1977 fi
1978 fi
1979
1980 # Create the discid file
1981 echo "$TRACKINFO" > "$ABCDETEMPDIR/discid"
1982 if checkstatus cddbmethod > /dev/null 2>&1 ; then :; else
1983 echo "cddbmethod=$CDDBMETHOD" >> "$ABCDETEMPDIR/status"
1984 fi
1985 }
1986
1987 # do_cleancue
1988 # Create a proper CUE file based on the CUE file we created before.
1989 do_cleancue()
1990 {
1991 if CUEFILE_IN="$ABCDETEMPDIR"/$(checkstatus cuefile); then
1992 CUEFILE_OUT=$CUEFILE_IN.out
1993 ### FIXME ### checkstatus cddb
1994 if [ -e "$CDDBDATA" ]; then
1995 vecho "Adding metadata to the cue file..."
1996 # FIXME It doesn't preserve spaces! Why?
1997 # FIXME parse $track into PERFORMER and TITLE - abcde already has code for this?
1998 n=1
1999 echo "PERFORMER \"$DARTIST\"" >> "$CUEFILE_OUT"
2000 echo "TITLE \"$DALBUM\"" >> "$CUEFILE_OUT"
2001 # Set IFS to <newline> to prevent read from swallowing spaces and tabs
2002 OIFS="$IFS"
2003 IFS='
2004 '
2005 cat "$CUEFILE_IN" | while read line
2006 do
2007 if echo "$line" | grep "INDEX 01" > /dev/null 2>&1 ; then
2008 # FIXME # Possible patch: remove the line above, uncomment the 2 lines below.
2009 # echo "$line" >> "$CUEFILE_OUT"
2010 # if echo "$line" | grep "^[[:space:]]*TRACK" > /dev/null 2>&1 ; then
2011 eval track="\$TRACK$n"
2012 n=$(expr $n + 1)
2013 echo " TITLE \"$track\"" >> "$CUEFILE_OUT"
2014 fi
2015 # FIXME # If the lines above are uncommented, remove the line below.
2016 echo "$line" >> "$CUEFILE_OUT"
2017 done
2018 IFS="$OIFS"
2019 mv "$CUEFILE_OUT" "$CUEFILE_IN"
2020 echo "cleancuefile" >> "$ABCDETEMPDIR/status"
2021 fi
2022 fi
2023 }
2024
2025 # do_cddbparse
2026 # Parses a CDDB file and outputs the title and the track names.
2027 # Variables: CDDBFILE
2028 do_cddbparse ()
2029 {
2030 CDDBPARSEFILE="$1"
2031 # List out disc title/author and contents
2032 if [ "$ONETRACK" = "y" ]; then
2033 vecho "ONETRACK mode selected: displaying only the title of the CD..."
2034 fi
2035 echo "---- $(grep DTITLE "${CDDBPARSEFILE}" | cut '-d=' -f2- | tr -d \\r\\n ) ----"
2036 if [ X"$SHOWCDDBYEAR" = "Xy" ]; then
2037 PARSEDYEAR=$(grep DYEAR "${CDDBPARSEFILE}" | cut '-d=' -f2-)
2038 if [ ! X"$PARSEDYEAR" = "X" ]; then
2039 echo "Year: $PARSEDYEAR"
2040 fi
2041 fi
2042 if [ X"$SHOWCDDBGENRE" = "Xy" ]; then
2043 PARSEDGENRE=$(grep DGENRE "${CDDBPARSEFILE}" | cut '-d=' -f2-)
2044 if [ ! X"$PARSEDGENRE" = "X" ]; then
2045 echo "Genre: $PARSEDGENRE"
2046 fi
2047 fi
2048 if [ ! "$ONETRACK" = "y" ]; then
2049 for TRACK in $(f_seq_row 1 $TRACKS)
2050 do
2051 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "${CDDBPARSEFILE}" | cut -f2- -d= | tr -d \\r\\n)"
2052 done
2053 fi
2054 }
2055
2056 # do_localcddb
2057 # Check for a local CDDB file, and report success
2058 do_localcddb ()
2059 {
2060 if checkstatus cddb-readcomplete && checkstatus cddb-choice >/dev/null; then :; else
2061
2062 CDDBLOCALSTATUS="notfound"
2063 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2064 USELOCALRESP="y"
2065
2066 if [ "$CDDBLOCALRECURSIVE" = "y" ]; then
2067 CDDBLOCALRESULTS="$(find ${CDDBLOCALDIR} -name "${CDDBDISCID}" -type f 2> /dev/null)"
2068 if [ ! "${CDDBLOCALRESULTS}" = "" ]; then
2069 if (( $(echo "${CDDBLOCALRESULTS}" | wc -l) == 1 )); then
2070 CDDBLOCALFILE="${CDDBLOCALRESULTS}"
2071 CDDBLOCALMATCH=single
2072 elif (( $(echo "${CDDBLOCALRESULTS}" | wc -l) > 1 )); then
2073 CDDBLOCALMATCH=multiple
2074 fi
2075 else
2076 CDDBLOCALMATCH=none
2077 fi
2078 elif [ "$CDDBLOCALMATCH" = "none" ] && [ -r "${CDDBLOCALDIR}/${CDDBDISCID}" ]; then
2079 CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
2080 CDDBLOCALMATCH=single
2081 else
2082 CDDBLOCALMATCH=none
2083 fi
2084
2085 # If the user has selected to check a local CDDB repo, we proceed with it
2086 case $CDDBLOCALMATCH in
2087 multiple)
2088 echo "Processing multiple matching CDDB entries..." > "$ABCDETEMPDIR/cddblocalchoices"
2089 X=0
2090 echo "$CDDBLOCALRESULTS" | while read RESULT ; do
2091 X=$(expr $X + 1)
2092 # List out disc title/author and contents
2093 CDDBLOCALREAD="$ABCDETEMPDIR/cddblocalread.$X"
2094 cat "$RESULT" > "${CDDBLOCALREAD}"
2095 {
2096 echo -n "#$X: "
2097 do_cddbparse "${CDDBLOCALREAD}"
2098 echo ""
2099 ##FIXME## QUICK HACK !!!!
2100 if [ ! "$INTERACTIVE" = "y" ]; then break ; fi
2101 } >> "$ABCDETEMPDIR/cddblocalchoices"
2102 done
2103 if [ $(cat "$ABCDETEMPDIR/cddblocalchoices" | wc -l) -ge 24 ] && [ "$INTERACTIVE" = "y" ]; then
2104 page "$ABCDETEMPDIR/cddblocalchoices"
2105 else
2106 # It's all going to fit in one page, cat it
2107 cat "$ABCDETEMPDIR/cddblocalchoices" >&2
2108 fi
2109 CDDBLOCALCHOICES=$( echo "$CDDBLOCALRESULTS" | wc -l )
2110 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2111 CDDBLOCALCHOICENUM=-1
2112 if [ "$INTERACTIVE" = "y" ]; then
2113 while [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; do
2114 echo -n "Locally cached CDDB entries found. Which one would you like to use (0 for none)? [0-$CDDBLOCALCHOICES]: " >&2
2115 read CDDBLOCALCHOICE
2116 [ x"$CDDBLOCALCHOICE" = "x" ] && CDDBLOCALCHOICE="1"
2117 # FIXME # Introduce diff's
2118 if echo $CDDBLOCALCHOICE | egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2119 diffentries cddblocalread "$CDDBLOCALCHOICES" "$CDDBLOCALCHOICE"
2120 elif echo $CDDBLOCALCHOICE | egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2121 # Make sure we get a valid choice
2122 CDDBLOCALCHOICENUM=$(echo $CDDBLOCALCHOICE | xargs printf %d 2>/dev/null)
2123 if [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; then
2124 echo "Invalid selection. Please choose a number between 0 and $CDDBLOCALCHOICES." >&2
2125 fi
2126 fi
2127 done
2128 else
2129 ### FIXME ###
2130 #echo "Selected ..."
2131 CDDBLOCALRESP=y
2132 CDDBLOCALCHOICENUM=1
2133 fi
2134 if [ ! "$CDDBLOCALCHOICENUM" = "0" ]; then
2135 #echo "Using local copy of CDDB data"
2136 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2137 cat "$ABCDETEMPDIR/cddblocalread.$CDDBLOCALCHOICENUM" >> "$ABCDETEMPDIR/cddbread.1"
2138 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2139 echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
2140 do_cddbparse "$ABCDETEMPDIR/cddbread.1" > "$ABCDETEMPDIR/cddbchoices"
2141 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2142 CDDBLOCALSTATUS="found"
2143 else
2144 #echo "Not using local copy of CDDB data"
2145 CDDBLOCALSTATUS="notfound"
2146 fi
2147 ;;
2148 single)
2149 # List out disc title/author and contents
2150 do_cddbparse "${CDDBLOCALFILE}"
2151 #if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
2152 # echo -n "Embedded cuesheet entry found, use it? [y/n] (y): " >&2
2153 #else
2154 echo -n "Locally cached CDDB entry found, use it? [y/n] (y): " >&2
2155 #fi
2156 if [ "$INTERACTIVE" = "y" ]; then
2157 read USELOCALRESP
2158 while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
2159 echo -n 'Invalid selection. Please answer "y" or "n": ' >&2
2160 read USELOCALRESP
2161 done
2162 [ x"$USELOCALRESP" = "x" ] && USELOCALRESP="y"
2163 else
2164 echo "y" >&2
2165 fi
2166 if [ "$USELOCALRESP" = "y" ]; then
2167 #echo "Using local copy of CDDB data"
2168 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2169 cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
2170 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2171 echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
2172 do_cddbparse "${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
2173 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2174 CDDBLOCALSTATUS="single"
2175 else
2176 #echo "Not using local copy of CDDB data"
2177 CDDBLOCALSTATUS="notfound"
2178 fi
2179 ;;
2180 none)
2181 CDDBLOCALSTATUS="notfound"
2182 ;;
2183 esac
2184 fi
2185 }
2186
2187 do_musicbrainzstat ()
2188 {
2189 :
2190 }
2191
2192 do_musicbrainz ()
2193 {
2194 # Use MBE_TOCGetCDIndexId on a perl query
2195 :
2196 }
2197
2198 # do_cddbstat
2199 do_cddbstat ()
2200 {
2201 # Perform CDDB protocol version check if it hasn't already been done
2202 if checkstatus cddb-statcomplete; then :; else
2203 if [ "$CDDBAVAIL" = "n" ]; then
2204 ERRORCODE=no_query
2205 echo 503 > "$ABCDETEMPDIR/cddbstat"
2206 else
2207 rc=1
2208 CDDBUSER=$(echo $HELLOINFO | cut -f1 -d'@')
2209 CDDBHOST=$(echo $HELLOINFO | cut -f2- -d'@')
2210 while test $rc -eq 1 -a $CDDBPROTO -ge 3; do
2211 vecho "Checking CDDB server status..."
2212 $CDDBTOOL stat $CDDBURL $CDDBUSER $CDDBHOST $CDDBPROTO > "$ABCDETEMPDIR/cddbstat"
2213 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
2214 case "$RESPONSECODE" in
2215 210) # 210 OK, status information follows (until terminating `.')
2216 rc=0
2217 ;;
2218 501) # 501 Illegal CDDB protocol level: <n>.
2219 CDDBPROTO=`expr $CDDBPROTO - 1`
2220 ;;
2221 *) # Try a cddb query, since freedb2.org doesn't support the stat or ver commands
2222 # FreeDB TESTCD disc-id is used for query
2223 $CDDBTOOL query $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST 03015501 1 296 344 > "$ABCDETEMPDIR/cddbstat"
2224 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
2225 case "$RESPONSECODE" in
2226 2??) # Server responded, everything seems OK
2227 rc=0
2228 ;;
2229 esac
2230 ;;
2231 esac
2232 done
2233 if test $rc -eq 1; then
2234 CDDBAVAIL="n"
2235 fi
2236 fi
2237 echo cddb-statcomplete >> "$ABCDETEMPDIR/status"
2238 fi
2239 }
2240
2241
2242 # do_cddbquery
2243 do_cddbquery ()
2244 {
2245 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2246 CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
2247
2248 # Perform CDDB query if it hasn't already been done
2249 if checkstatus cddb-querycomplete; then :; else
2250 if [ "$CDDBAVAIL" = "n" ]; then
2251 ERRORCODE=no_query
2252 echo 503 > "$ABCDETEMPDIR/cddbquery"
2253 # The default CDDBLOCALSTATUS is "notfound"
2254 # This part will be triggered if the user CDDB repo does not
2255 # contain the entry, or if we are not trying to use the repo.
2256 else
2257 vecho "Querying the CDDB server..."
2258 CDDBUSER=$(echo $HELLOINFO | cut -f1 -d'@')
2259 CDDBHOST=$(echo $HELLOINFO | cut -f2- -d'@')
2260 $CDDBTOOL query $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $TRACKINFO > "$ABCDETEMPDIR/cddbquery"
2261 ERRORCODE=$?
2262 case $ERRORCODE in
2263 0) # success
2264 ;;
2265 12|13|14)
2266 # no match found in database,
2267 # wget/fetch error, or user requested not to use CDDB
2268 # Make up an error code (503) that abcde
2269 # will recognize in do_cddbread
2270 # and compensate by making a template
2271 echo 503 > "$ABCDETEMPDIR/cddbquery"
2272 ;;
2273 *) # strange and unknown error
2274 echo ERRORCODE=$ERRORCODE
2275 echo "abcde: $CDDBTOOL returned unknown error code"
2276 ;;
2277 esac
2278 fi
2279 echo cddb-querycomplete >> "$ABCDETEMPDIR/status"
2280 fi
2281 }
2282
2283 # do_cddbread
2284 do_cddbread ()
2285 {
2286 # If it's not to be used, generate a template.
2287 # Then, display it (or them) and let the user choose/edit it
2288 if checkstatus cddb-readcomplete; then :; else
2289 vecho "Obtaining CDDB results..."
2290 # If CDDB is to be used, interpret the query results and read all
2291 # the available entries.
2292 rm -f "$ABCDETEMPDIR/cddbchoices"
2293 CDDBCHOICES=1 # Overridden by multiple matches
2294 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbquery" | cut -f1 -d' ')
2295 case "$RESPONSECODE" in
2296 200)
2297 # One exact match, retrieve it
2298 # 200 [section] [discid] [artist] / [title]
2299 if checkstatus cddb-read-1-complete; then :; else
2300 echo -n "Retrieving 1 CDDB match..." >> "$ABCDETEMPDIR/cddbchoices"
2301 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $(cut -f2,3 -d' ' "$ABCDETEMPDIR/cddbquery") > "$ABCDETEMPDIR/cddbread.1"
2302 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2303 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2304 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2305 fi
2306 # List out disc title/author and contents
2307 echo ---- "$(cut '-d ' -f4- "$ABCDETEMPDIR/cddbquery")" ---- >> "$ABCDETEMPDIR/cddbchoices"
2308 for TRACK in $(f_seq_row 1 $TRACKS)
2309 do
2310 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2311 done
2312 echo >> "$ABCDETEMPDIR/cddbchoices"
2313 ;;
2314 202|403|409|503)
2315 # No match
2316 case "$RESPONSECODE" in
2317 202) echo "No CDDB match." >> "$ABCDETEMPDIR/cddbchoices" ;;
2318 403|409) echo "CDDB entry is corrupt, or the handshake failed." >> "$ABCDETEMPDIR/cddbchoices" ;;
2319 503) echo "CDDB unavailable." >> "$ABCDETEMPDIR/cddbchoices" ;;
2320 esac
2321 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2322 # List out disc title/author and contents of template
2323 echo ---- Unknown Artist / Unknown Album ---- >> "$ABCDETEMPDIR/cddbchoices"
2324 UNKNOWNDISK=y
2325 for TRACK in $(f_seq_row 1 $TRACKS)
2326 do
2327 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2328 done
2329 echo >> "$ABCDETEMPDIR/cddbchoices"
2330 echo cddb-read-0-complete >> "$ABCDETEMPDIR/status"
2331 echo cddb-choice=0 >> "$ABCDETEMPDIR/status"
2332 ;;
2333 210|211)
2334 # Multiple exact, (possibly multiple) inexact matches
2335 IN=
2336 if [ "$RESPONSECODE" = "211" ]; then IN=in; fi
2337 if [ "$(wc -l < "$ABCDETEMPDIR/cddbquery" | tr -d ' ')" -eq 3 ]; then
2338 echo "One ${IN}exact match:" >> "$ABCDETEMPDIR/cddbchoices"
2339 tail -n +2 "$ABCDETEMPDIR/cddbquery" | head -n 1 >> "$ABCDETEMPDIR/cddbchoices"
2340 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2341 else
2342 echo "Multiple ${IN}exact matches:" >> "$ABCDETEMPDIR/cddbchoices"
2343 fi
2344 vecho -n "Retrieving multiple matches... "
2345 grep -v ^[.]$ "$ABCDETEMPDIR/cddbquery" | ( X=0
2346 read DISCINFO # eat top line
2347 while read DISCINFO
2348 do
2349 X=$(expr $X + 1)
2350 if checkstatus cddb-read-$X-complete; then :; else
2351 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $(echo $DISCINFO | cut -f1,2 -d' ') > "$ABCDETEMPDIR/cddbread.$X"
2352 echo cddb-read-$X-complete >> "$ABCDETEMPDIR/status"
2353 fi
2354 # List out disc title/author and contents
2355 echo \#$X: ---- "$DISCINFO" ---- >> "$ABCDETEMPDIR/cddbchoices"
2356 for TRACK in $(f_seq_row 1 $TRACKS)
2357 do
2358 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2359 done
2360 echo >> "$ABCDETEMPDIR/cddbchoices"
2361 done )
2362 vecho "done."
2363 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2364 ;;
2365 999)
2366 # Using local copy.
2367 for TRACK in $(f_seq_row 1 $TRACKS)
2368 do
2369 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2370 done
2371 echo >> "$ABCDETEMPDIR/cddbchoices"
2372 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2373 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2374 ;;
2375 esac
2376 echo "cddb-readcomplete" >> "$ABCDETEMPDIR/status"
2377 fi
2378 }
2379
2380 # do_cddbedit
2381 do_cddbedit ()
2382 {
2383 if checkstatus cddb-edit >/dev/null; then
2384 CDDBDATA="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2385 VARIOUSARTISTS="$(checkstatus variousartists)"
2386 VARIOUSARTISTSTYLE="$(checkstatus variousartiststyle)"
2387 return 0
2388 fi
2389 if [ "$INTERACTIVE" = "y" ]; then
2390 # We should show the CDDB results both when we are not using the local CDDB repo
2391 # or when we are using it but we could not find a proper match
2392 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
2393 # Display the $ABCDETEMPDIR/cddbchoices file created above
2394 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2395 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2396 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2397 CHOICE=$(checkstatus cddb-choice)
2398 if [ -n "$CHOICE" ] ; then
2399 case $CDDBCHOICES in
2400 -1) if head -1 "$ABCDETEMPDIR/cddbquery" | grep "^$" > /dev/null 2>&1 ; then
2401 log error "CDDB query failed!"
2402 exit 1
2403 else
2404 cat "$ABCDETEMPDIR/cddbchoices"
2405 fi
2406 ;;
2407 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2408 *)
2409 echo "Selected: #$CHOICE"
2410 do_cddbparse "$ABCDETEMPDIR/cddbread.$CHOICE"
2411 ;;
2412 esac
2413 else
2414 # The user has a choice to make, display the info in a pager if necessary
2415 if [ $(cat "$ABCDETEMPDIR/cddbchoices" | wc -l) -ge 24 ]; then
2416 page "$ABCDETEMPDIR/cddbchoices"
2417 else
2418 # It's all going to fit in one page, cat it
2419 cat "$ABCDETEMPDIR/cddbchoices" >&2
2420 fi
2421
2422 CDDBCHOICENUM=""
2423 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2424 CDCHOICENUM=-1
2425 # I'll take CDDB read #3 for $400, Alex
2426 while [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; do
2427 echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
2428 read CDDBCHOICE
2429 [ X"$CDDBCHOICE" = "X" ] && CDDBCHOICE=1
2430 if echo $CDDBCHOICE | egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2431 if [ ! X"$DIFF" = "X" ]; then
2432 PARSECHOICE1=$(echo $CDDBCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
2433 PARSECHOICE2=$(echo $CDDBCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
2434 if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
2435 [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
2436 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
2437 echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBCHOICES" >&2
2438 else
2439 # We parse the 2 choices to diff, store them in temporary files and diff them.
2440 for PARSECHOICE in $(echo $CDDBCHOICE | tr , \ ); do
2441 do_cddbparse "$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
2442 done
2443 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/cddbread.diff"
2444 $DIFF $DIFFOPTS "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/cddbread.diff"
2445 if [ $(cat "$ABCDETEMPDIR/cddbread.diff" | wc -l) -ge 24 ]; then
2446 page "$ABCDETEMPDIR/cddbread.diff"
2447 else
2448 cat "$ABCDETEMPDIR/cddbread.diff" >&2
2449 fi
2450 fi
2451 else
2452 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
2453 fi
2454 elif echo $CDDBCHOICE | egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2455 # Make sure we get a valid choice
2456 CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
2457 if [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; then
2458 echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
2459 fi
2460 fi
2461 done
2462 if [ "$CDCHOICENUM" = "0" ]; then
2463 vecho "Creating empty CDDB template..."
2464 UNKNOWNDISK=y
2465 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2466 else
2467 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2468 do_cddbparse "$ABCDETEMPDIR/cddbread.$CDCHOICENUM"
2469 fi
2470 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2471 fi
2472 fi
2473 else
2474 # We need some code to show the selected option when local repository is selected and we have found a match
2475 vecho "Using cached CDDB match..." >&2
2476 # Display the $ABCDETEMPDIR/cddbchoices file created above
2477 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2478 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2479 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2480 CHOICE=$(checkstatus cddb-choice)
2481 if [ "$USELOCALRESP" = "y" ]; then :; else
2482 if [ -n "$CHOICE" ] ; then
2483 case $CDDBCHOICES in
2484 0)
2485 UNKNOWNDISK=y
2486 echo "Selected template."
2487 ;;
2488 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2489 *)
2490 echo "Selected: #$CHOICE"
2491 do_cddbparse "$ABCDETEMPDIR/cddbread.$CHOICE"
2492 ;;
2493 esac
2494 fi
2495 fi
2496 fi
2497 fi
2498 else
2499 # We're noninteractive - pick the first choice.
2500 # But in case we run a previous instance and selected a choice, use it.
2501 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2502 # Show the choice if we are not using the locally stored one
2503 # or when the local search failed to find a match.
2504 PREVIOUSCHOICE=$(checkstatus cddb-choice)
2505 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
2506 #if [ "$PREVIOUSCHOICE" ]; then
2507 cat "$ABCDETEMPDIR/cddbchoices"
2508 #fi
2509 fi
2510 if [ ! -z "$PREVIOUSCHOICE" ] ; then
2511 CDCHOICENUM=$PREVIOUSCHOICE
2512 else
2513 CDCHOICENUM=1
2514 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2515 fi
2516 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2517 fi
2518 fi
2519
2520 # sanity check
2521 if checkstatus cddb-choice >/dev/null; then :; else
2522 echo "abcde: internal error: cddb-choice not recorded." >&2
2523 exit 1
2524 fi
2525 CDDBDATA="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2526 echo -n "Edit selected CDDB data? [y/n] (" >&2
2527 if [ "$INTERACTIVE" = "y" ]; then
2528 if [ "$UNKNOWNDISK" = "y" ]; then
2529 echo -n "y): " >&2
2530 read EDITCDDB
2531 [ "$EDITCDDB" != "n" ] && EDITCDDB=y
2532 else
2533 echo -n "n): " >&2
2534 read EDITCDDB
2535 fi
2536 else
2537 echo "n): n" >&2
2538 EDITCDDB=n
2539 fi
2540 if [ "$EDITCDDB" = "y" ]; then
2541 CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
2542
2543 # Use the debian sensible-editor wrapper to pick the editor that the
2544 # user has requested via their $EDITOR environment variable
2545 if [ -x "/usr/bin/sensible-editor" ]; then
2546 /usr/bin/sensible-editor "$CDDBDATA"
2547 elif [ -n "$EDITOR" ]; then
2548 if [ -x $(which "${EDITOR%%\ *}") ]; then
2549 # That failed, try to load the preferred editor, starting
2550 # with their EDITOR variable
2551 eval $(echo "$EDITOR") \"$CDDBDATA\"
2552 fi
2553 # If that fails, check for a vi
2554 elif which vi >/dev/null 2>&1; then
2555 vi "$CDDBDATA"
2556 elif [ -x /usr/bin/vim ]; then
2557 /usr/bin/vim "$CDDBDATA"
2558 elif [ -x /usr/bin/vi ]; then
2559 /usr/bin/vi "$CDDBDATA"
2560 elif [ -x /bin/vi ]; then
2561 /bin/vi "$CDDBDATA"
2562 # nano should be on all (modern, i.e., sarge) debian systems
2563 elif which nano >/dev/null 2>&1 ; then
2564 nano "$CDDBDATA"
2565 elif [ -x /usr/bin/nano ]; then
2566 /usr/bin/nano "$CDDBDATA"
2567 # mg should be on all OpenBSD systems
2568 elif which mg >/dev/null 2>&1 ; then
2569 mg "$CDDBDATA"
2570 elif [ -x /usr/bin/mg ]; then
2571 /usr/bin/mg "$CDDBDATA"
2572 # bomb out
2573 else
2574 log warning "no editor available. Check your EDITOR environment variable."
2575 fi
2576 # delete editor backup file if it exists
2577 if [ -w "$CDDBDATA~" ]; then
2578 rm -f "$CDDBDATA~"
2579 fi
2580 fi
2581
2582 # Some heuristics first. Look at Disc Title, and if it starts with
2583 # "Various", then we'll assume Various Artists
2584 if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
2585 echo "Looks like a Multi-Artist CD" >&2
2586 VARIOUSARTISTS=y
2587 else
2588 echo -n "Is the CD multi-artist? [y/n] (n): " >&2
2589 if [ "$INTERACTIVE" = "y" ]; then
2590 read VARIOUSARTISTS
2591 else
2592 echo n >&2
2593 VARIOUSARTISTS=n
2594 fi
2595 fi
2596 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
2597 # Set a default
2598 DEFAULTSTYLE=1
2599 # Need NUMTRACKS before cddb-tool will return it:
2600 NUMTRACKS=$(egrep '^TTITLE[0-9]+=' "$CDDBDATA" | wc -l)
2601 if [ "$(grep -c "^TTITLE.*\/" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2602 # More than 1/2 tracks contain a "/", so guess forward
2603 DEFAULTSTYLE=1
2604 elif [ "$(grep -c "^TTITLE.*\-" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2605 # More than 1/2 contain a "-", so guess forward-dash
2606 DEFAULTSTYLE=2
2607 elif [ "$(grep -c "^TTITLE.*(.*)" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2608 # More than 1/2 contain something in parens, so guess trailing-paren
2609 DEFAULTSTYLE=6
2610 fi
2611
2612 echo "1) Artist / Title" >&2
2613 echo "2) Artist - Title" >&2
2614 echo "3) Title / Artist" >&2
2615 echo "4) Title - Artist" >&2
2616 echo "5) Artist: Title" >&2
2617 echo "6) Title (Artist)" >&2
2618 echo "7) This is a single-artist CD" >&2
2619 echo -n "Which style of multiple artist entries is it? [1-7] ($DEFAULTSTYLE): " >&2
2620 if [ "$INTERACTIVE" = "y" ]; then
2621 read VARIOUSARTISTSTYLE
2622 else
2623 echo $DEFAULTSTYLE >&2
2624 VARIOUSARTISTSTYLE=$DEFAULTSTYLE
2625 fi
2626 VARIOUSARTISTSTYLE=$(echo 0$VARIOUSARTISTSTYLE | xargs printf %d)
2627 # If they press Enter, then the default style (0) was chosen
2628 while [ $VARIOUSARTISTSTYLE -lt 0 ] || [ $VARIOUSARTISTSTYLE -gt 7 ]; do
2629 echo "Invalid selection. Please choose a number between 1 and 7."
2630 echo -n "Selection [1-7]: "
2631 read VARIOUSARTISTSTYLE
2632 VARIOUSARTISTSTYLE=$(echo 0$VARIOUSARTISTSTYLE | xargs printf %d)
2633 done
2634 if [ "$VARIOUSARTISTSTYLE" = "0" ]; then
2635 VARIOUSARTISTSTYLE=$DEFAULTSTYLE
2636 fi
2637 vecho "Selected: $VARIOUSARTISTSTYLE"
2638 case "$VARIOUSARTISTSTYLE" in
2639 1) # Artist / Title
2640 VARIOUSARTISTSTYLE=forward
2641 ;;
2642 2) # Artist - Title
2643 VARIOUSARTISTSTYLE=forward-dash
2644 ;;
2645 3) # Title / Artist
2646 VARIOUSARTISTSTYLE=reverse
2647 ;;
2648 4) # Title - Artist
2649 VARIOUSARTISTSTYLE=reverse-dash
2650 ;;
2651 5) # Artist: Title
2652 VARIOUSARTISTSTYLE=colon
2653 ;;
2654 6) # Title (Artist)
2655 VARIOUSARTISTSTYLE=trailing-paren
2656 ;;
2657 7) # Single Artist
2658 VARIOUSARTISTS=n
2659 ;;
2660 esac
2661 fi
2662
2663 echo "variousartists=$VARIOUSARTISTS" >> "$ABCDETEMPDIR/status"
2664 echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
2665
2666 if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
2667 if [ "$CDDBDATAMD5SUM" != "" ] && [ "$CDDBDATAMD5SUM" != "$($MD5SUM "$CDDBDATA" | cut -d " " -f 1)" ]; then
2668 # This works but does not have the necessary error checking
2669 # yet. If you are familiar with the CDDB spec
2670 # (see http://www.freedb.org/src/latest/DBFORMAT)
2671 # and can create an error-free entry on your own, then put
2672 # UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE=y in your
2673 # abcde.conf to enable it. Put CDDBSUBMIT=email@address in
2674 # your abcde.conf to change the email address submissions are
2675 # sent to.
2676
2677 # submit the modified file, if they want
2678 if [ "$NOSUBMIT" != "y" ]; then
2679 echo -n "Do you want to submit this entry to $CDDBSUBMIT? [y/n] (n): "
2680 read YESNO
2681 while [ "$YESNO" != "y" ] && [ "$YESNO" != "n" ] && [ "$YESNO" != "Y" ] && \
2682 [ "$YESNO" != "N" ] && [ "$YESNO" != "" ]
2683 do
2684 echo -n 'Invalid selection. Please answer "y" or "n": '
2685 read YESNO
2686 done
2687 if [ "$YESNO" = "y" ] || [ "$YESNO" = "Y" ]; then
2688 echo -n "Sending..."
2689 $CDDBTOOL send "$CDDBDATA" $CDDBSUBMIT
2690 echo "done."
2691 fi
2692 fi
2693 fi
2694 fi
2695 ### FIXME ###
2696 # User CDDBLOCALPOLICY to find out if we store the file or not...
2697 # Cache edited CDDB entry in the user's cddb dir
2698 if [ "$CDDBCOPYLOCAL" = "y" ]; then
2699 # Make sure the cache directory exists
2700 mkdir -p $CDDBLOCALDIR
2701 cat "$CDDBDATA" | tail -n $(expr $(cat "$CDDBDATA" | wc -l ) - 1 ) > ${CDDBLOCALDIR}/$(echo "$TRACKINFO" | cut -d' ' -f1)
2702 fi
2703
2704 echo "cddb-edit" >> "$ABCDETEMPDIR/status"
2705 }
2706
2707 # do_cdread [tracknumber]
2708 # do_cdread onetrack [firsttrack] [lasttrack]
2709 #
2710 do_cdread ()
2711 {
2712 # The commands here don't go through run_command because they're never supposed to be silenced
2713 # return codes need to be doublechecked anyway, however
2714 if [ "$1" = "onetrack" ]; then
2715 # FIXME # Add the possibility of grabbing ranges of tracks in onetrack
2716 # FIXME # Until then, we grab the whole CD in one track, no matter what
2717 # the user said
2718 # We need the first and last track for cdda2wav/icedax
2719 FIRSTTRACK=$2
2720 LASTTRACK=$(expr $3 + 0)
2721 UTRACKNUM=$FIRSTTRACK
2722 case "$CDROMREADERSYNTAX" in
2723 flac) READTRACKNUMS="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
2724 cdparanoia)
2725 #XX FIXME XX
2726 # Add a variable to check if tracks are provided in command line and if not, use "0-" to rip the tracks
2727 READTRACKNUMS="$FIRSTTRACK-$LASTTRACK" ;;
2728 cdda2wav | icedax) READTRACKNUMS="$FIRSTTRACK+$LASTTRACK" ;;
2729 *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
2730 exit 1 ;;
2731 esac
2732 else
2733 UTRACKNUM=$1
2734 fi
2735 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
2736 if [ "$USEPIPES" = "y" ]; then
2737 TEMPARG="PIPERIPPER_$CDROMREADERSYNTAX"
2738 FILEARG="$( eval echo "\$$TEMPARG" )"
2739 REDIR="y"
2740 PIPE_MESSAGE="and encoding "
2741 else
2742 WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
2743 case "$CDROMREADERSYNTAX" in
2744 ## FIXME ## Find the cases for dagrab and flac, to avoid exceptions
2745 flac)
2746 FILEARG="--output-name=$WAVDATA"
2747 ;;
2748 dagrab)
2749 FILEARG="-f $WAVDATA"
2750 ;;
2751 *)
2752 FILEARG="$WAVDATA"
2753 ;;
2754 esac
2755 REDIR="n"
2756 fi
2757 if [ "$1" = "onetrack" ]; then
2758 echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
2759 else
2760 if [ -r "$CDDBDATA" ]; then
2761 getcddbinfo TRACKNAME
2762 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
2763 else
2764 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM..." >&2
2765 fi
2766 fi
2767 case "$CDROMREADERSYNTAX" in
2768 ### FIXME ### use an exception for flac, since it uses -o
2769 ### FIXME ### Shall we just use -o $FILEARG ??
2770 flac)
2771 # Avoid problems wit math expressions by unpadding the given UTRACKNUM
2772 STRIPTRACKNUM=$(expr $UTRACKNUM + 0)
2773 nice $READNICE $FLAC -d -f --cue=${READTRACKNUMS:-$STRIPTRACKNUM.1-$(($STRIPTRACKNUM + 1)).0} "$FILEARG" "$CDROM" ;;
2774 cdparanoia)
2775 if [ "$REDIR" = "y" ]; then
2776 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
2777 else
2778 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
2779 fi;;
2780
2781 cdda2wav | icedax)
2782 if [ "$OSFLAVOUR" = "OSX" ] ; then
2783 # Hei, we have to unmount the device before running anything like cdda2wav/icedax in OSX
2784 disktool -u ${CDROM#/dev/} 0
2785 # Also, in OSX the cdrom device for cdda2wav/icedax changes...
2786 CDDA2WAVCDROM="IODVDServices"
2787 elif [ "$OSFLAVOUR" = "FBSD" ] ; then
2788 CDDA2WAVCDROM="$CDROMID"
2789 else
2790 if [ "$CDROMID" = "" ]; then
2791 CDDA2WAVCDROM="$CDROM"
2792 else
2793 CDDA2WAVCDROM="$CDROMID"
2794 fi
2795 fi
2796 if [ "$REDIR" = "y" ]; then
2797 nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
2798 else
2799 nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
2800 fi ;;
2801 ## FIXME ## We have an exception for dagrab, since it uses -f
2802 ## FIXME ## Shall we just use -f $FILEARG ??
2803 dagrab)
2804 if [ "$REDIR" = "y" ]; then
2805 nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG" >&2
2806 else
2807 nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG"
2808 fi ;;
2809 cddafs)
2810 # Find the track's mounted path
2811 REALTRACKNUM=$(expr $UTRACKNUM + 0)
2812 FILEPATH=$(mount | grep "$CDROM on" | sed 's/^[^ ]* on \(.*\) (.*/\1/')
2813 FILEPATH=$(find "$FILEPATH" | grep "/$REALTRACKNUM ");
2814 # If the file exists, copy it
2815 if [ -e "$FILEPATH" ] ; then
2816 if [ "$REDIR" = "y" ]; then
2817 nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG" >&2
2818 else
2819 nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG"
2820 fi
2821 else
2822 false
2823 fi ;;
2824 debug)
2825 if [ "$REDIR" = "y" ]; then
2826 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG" >&2
2827 else
2828 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG"
2829 fi ;;
2830 esac
2831 RETURN=$?
2832 # If we get some error or we get some missing wav
2833 # (as long as we dont use pipes)
2834 if [ "$RETURN" != "0" -o \( ! -s "$WAVDATA" -a X"$USEPIPES" != "Xy" \) ]; then
2835 # Thank goodness errors is only machine-parseable up to the
2836 # first colon, otherwise this woulda sucked
2837 if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
2838 RETURN=73 # fake a return code as cdparanoia return 0 also on aborted reads
2839 fi
2840 if [ "$USEPIPES" = "y" ]; then
2841 echo "readencodetrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2842 else
2843 echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2844 fi
2845 return $RETURN
2846 else
2847 if [ "$USEPIPES" = "y" ]; then
2848 echo readencodetrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
2849 else
2850 echo readtrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
2851 fi
2852 if [ "$1" = "onetrack" ]; then
2853 echo onetrack >> "$ABCDETEMPDIR/status"
2854 fi
2855 fi
2856 }
2857
2858 # do_cdspeed
2859 # No values accepted, only uses env variables
2860 do_cdspeed ()
2861 {
2862 if "$CDSPEED" "$CDSPEEDOPTS" "$CDSPEEDVALUE" >/dev/null ; then
2863 vecho "Setting CD speed to ${CDSPEEDVALUE}x"
2864 else
2865 echo "abcde: unable to set the device speed" >&2
2866 fi
2867 }
2868
2869 # vecho [message]
2870 #
2871 # vecho outputs a message if EXTRAVERBOSE is selected
2872 vecho ()
2873 {
2874 if [ x"$EXTRAVERBOSE" != "x" ]; then
2875 case $1 in
2876 warning) shift ; log warning "$@" ;;
2877 *) echo "$@" ;;
2878 esac
2879 fi
2880 }
2881
2882 # decho [message]
2883 #
2884 # decho outputs a debug message if DEBUG is selected
2885 decho ()
2886 {
2887 if [ x"$DEBUG" != "x" ]; then
2888 if echo $1 | grep "^\[" > /dev/null 2>&1 ; then
2889 DEBUGECHO=$(echo "$@" | tr -d '[]')
2890 echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
2891 else
2892 echo "[DEBUG] $1"
2893 fi
2894 fi
2895 }
2896
2897 # User-redefinable functions
2898 # Custom filename munging:
2899 mungefilename ()
2900 {
2901 #echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
2902 echo "$@" | sed s,:,\ -,g | tr \ / __ | tr -d \'\"\?\[:cntrl:\]
2903 }
2904
2905 # Custom genre munging:
2906 mungegenre ()
2907 {
2908 echo $CDGENRE | tr "[:upper:]" "[:lower:]"
2909 }
2910
2911 # pre_read
2912 # Empty pre_read function, to be defined in the configuration file.
2913 pre_read ()
2914 {
2915 :
2916 }
2917
2918 # post_read
2919 # Empty post_read function, to be defined in the configuration file.
2920 post_read ()
2921 {
2922 :
2923 }
2924
2925 # post_encode
2926 # Empty post_encode function, to be defined in the configuration file.
2927 post_encode ()
2928 {
2929 :
2930 }
2931
2932 ###############################################################################
2933 # End of functions
2934 #
2935 # Start of execution
2936 ###############################################################################
2937
2938 # Builtin defaults
2939
2940 # CDDB
2941 # Defaults to FreeDB, but a python musicbrainz can be used
2942 CDDBMETHOD=cddb
2943 CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
2944 CDDBSUBMIT=freedb-submit@freedb.org
2945 CDDBPROTO=6
2946 HELLOINFO="$(whoami)@$(hostname)"
2947 CDDBCOPYLOCAL="n"
2948 CDDBLOCALPOLICY="always"
2949 CDDBLOCALRECURSIVE="y"
2950 CDDBLOCALDIR="$HOME/.cddb"
2951 CDDBUSELOCAL="n"
2952
2953 # List of fields we parse and show during the CDDB parsing...
2954 SHOWCDDBFIELDS="year,genre"
2955
2956 INTERACTIVE=y
2957 #CDROMREADERSYNTAX=cdparanoia
2958 ENCODERSYNTAX=default
2959
2960 MP3ENCODERSYNTAX=default
2961 OGGENCODERSYNTAX=default
2962 FLACENCODERSYNTAX=default
2963 SPEEXENCODERSYNTAX=default
2964 MPPENCODERSYNTAX=default
2965 AACENCODERSYNTAX=default
2966 NORMALIZERSYNTAX=default
2967 CUEREADERSYNTAX=default
2968
2969 OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
2970 # Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
2971 #VAOUTPUTFORMAT=${OUTPUTFORMAT}
2972 VAOUTPUTFORMAT='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
2973 ONETRACKOUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
2974 VAONETRACKOUTPUTFORMAT='Various-${ALBUMFILE}/${ALBUMFILE}'
2975 PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2976 PLAYLISTDATAPREFIX=''
2977 VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2978 VAPLAYLISTDATAPREFIX=''
2979 DOSPLAYLIST=n
2980 COMMENT=''
2981 ID3TAGV=2
2982 ENCNICE=10
2983 READNICE=10
2984 DISTMP3NICE=10
2985 VARIOUSARTISTS=n
2986 VARIOUSARTISTSTYLE=forward
2987 KEEPWAVS=n
2988 PADTRACKS=n
2989 NOGAP=n
2990 BATCHNORM=n
2991 NOCDDBQUERY=n
2992
2993 # If using scsi devices, cdda2wav/icedax needs a CDROMID, instead of a device node
2994 # i.e. CDROMID="1,0,0"
2995 CDROMID=""
2996 # If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
2997 # If we are using the ide-scsi emulation layer, we need to define a "g"
2998 CDPARANOIACDROMBUS="d"
2999
3000 # program paths - defaults to checking your $PATH
3001 # mp3
3002 LAME=lame
3003 TOOLAME=toolame
3004 GOGO=gogo
3005 BLADEENC=bladeenc
3006 L3ENC=l3enc
3007 XINGMP3ENC=xingmp3enc
3008 MP3ENC=mp3enc
3009 # ogg
3010 VORBIZE=vorbize
3011 OGGENC=oggenc
3012 # flac
3013 FLAC=flac
3014 # speex
3015 SPEEXENC=speexenc
3016 # mpp (Musepack)
3017 MPPENC=mppenc
3018 # m4a
3019 AACENC=faac
3020
3021 ID3=id3
3022 ID3V2=id3v2
3023 EYED3=eyeD3
3024 VORBISCOMMENT=vorbiscomment
3025 METAFLAC=metaflac
3026 AACTAG=faac
3027
3028 CDPARANOIA=cdparanoia
3029 CDDA2WAV=icedax
3030 DAGRAB=dagrab
3031 CDDAFS=cp
3032 CDDISCID=cd-discid
3033 CDDBTOOL=cddb-tool
3034 MUSICBRAINZ=musicbrainz-get-tracks
3035 EJECT=eject
3036 MD5SUM=md5sum
3037 DISTMP3=distmp3
3038 NORMALIZE=normalize-audio
3039 CDSPEED=eject
3040 VORBISGAIN=vorbisgain
3041 MP3GAIN=mp3gain
3042 MPPGAIN=replaygain
3043 MKCUE=mkcue
3044 MKTOC=cdrdao
3045 DIFF=diff
3046 CUE2DISCID=builtin
3047
3048 # Options for programs called from abcde
3049 # mp3
3050 LAMEOPTS=
3051 TOOLAMEOPTS=
3052 GOGOOPTS=
3053 BLADEENCOPTS=
3054 L3ENCOPTS=
3055 XINGMP3ENCOPTS=
3056 MP3ENCOPTS=
3057 MP3GAINOPTS="-a -k"
3058 # ogg
3059 VORBIZEOPTS=
3060 OGGENCOPTS=
3061 VORBISGAINOPTS="--album"
3062 # flac
3063 FLACOPTS=
3064 FLACGAINOPTS="--add-replay-gain"
3065 # speex
3066 SPEEXENCOPTS=
3067 # mpc
3068 MPPENCOPTS=
3069 # m4a
3070 AACENCOPTS=
3071
3072 ID3OPTS=
3073 ID3V2OPTS=
3074 CDPARANOIAOPTS=
3075 CDDA2WAVOPTS=
3076 DAGRABOPTS=
3077 CDDAFSOPTS="-f"
3078 CDDBTOOLOPTS=
3079 EJECTOPTS=
3080 DISTMP3OPTS=
3081 NORMALIZEOPTS=
3082 CDSPEEDOPTS="-x"
3083 CDSPEEDVALUE=
3084 MKCUEOPTS=
3085 MKTOCOPTS=""
3086 VORBISCOMMENTOPTS="-R"
3087 METAFLACOPTS="--no-utf8-convert"
3088 DIFFOPTS=
3089
3090 # Default to one process if -j isn't specified
3091 MAXPROCS=1
3092
3093 # List of actions to perform - by default, run to completion
3094 ACTIONS=cddb,read,encode,tag,move,clean
3095
3096 # This option is basicaly for Debian package dependencies:
3097 # List of prefered outputs - by default, run with whatever we have in the path
3098 DEFAULT_OUTPUT_BINARIES=vorbis:oggenc,flac:flac,mp3:toolame,mp3:lame,mp3:bladeenc,spx:speex,m4a:faac
3099
3100 # List of prefered cdromreaders - by default, run whichever we have in the path
3101 DEFAULT_CDROMREADERS="cdparanoia icedax cdda2wav"
3102
3103 # List of quality levels associated with the encoders:
3104 DEFAULT_QUALITY_XLO="oggenc:-q -1,lame:-q 9,speex:--quality 1,m4a:"
3105 DEFAULT_QUALITY_LO="oggenc:-q 1,lame:-q 7,speex:--quality 5,m4a:"
3106 DEFAULT_QUALITY_HI="oggenc:-q 7,lame:--preset standard,speex:--quality 9,m4a:"
3107 DEFAULT_QUALITY_XHI="oggenc:-q 10,lame:--preset extreme,speex:--quality 10,m4a:"
3108
3109 # Asume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for
3110 # Linux/OpenBSD. ftp is user for NetBSD.
3111 # Let's use these checkings to determine the OS flavour, which will be used
3112 # later
3113 if [ X$(uname) = "XFreeBSD" ] ; then
3114 HTTPGET=fetch
3115 MD5SUM=md5
3116 NEEDCDROMID=y
3117 OSFLAVOUR=FBSD
3118 elif [ X$(uname) = "XDarwin" ] ; then
3119 HTTPGET=curl
3120 OSFLAVOUR=OSX
3121 # We should have disktool in OSX, but let's be sure...
3122 NEEDDISKTOOL=y
3123 CDROMREADERSYNTAX=cddafs
3124 elif [ X$(uname) = "XOpenBSD" ] ; then
3125 HTTPGET=wget
3126 MD5SUM=md5
3127 OSFLAVOUR=OBSD
3128 elif [ X$(uname) = "XNetBSD" ] ; then
3129 HTTPGET=ftp
3130 MD5SUM=md5
3131 OSFLAVOUR=NBSD
3132 elif [ X$(uname) = "SunOS" ] ; then
3133 HTTPGET=""
3134 MD5SUM=md5
3135 OSFLAVOUR=SunOS
3136 else
3137 HTTPGET=wget
3138 fi
3139
3140 # If CDDBAVAIL is set to n, no CDDB read is done
3141 # If USEID3 is set to n, no ID3 tagging is done
3142 CDDBAVAIL=y
3143 USEID3=y
3144 USEID3V2=y
3145
3146 # There we go..
3147 # But before we get into business, let us chop off any GREP environmental
3148 # variables.
3149 GREP_OPTIONS=""
3150 GREP_COLOR=""
3151
3152 if [ -z "$OUTPUTDIR" ]; then
3153 OUTPUTDIR=$(pwd)
3154 fi
3155
3156 if [ -z "$WAVOUTPUTDIR" ]; then
3157 WAVOUTPUTDIR="$OUTPUTDIR"
3158 fi
3159
3160 # Load system defaults
3161 if [ -r /etc/abcde.conf ]; then
3162 . /etc/abcde.conf
3163 fi
3164 # Load user preference defaults
3165 if [ -r $HOME/.abcde.conf ]; then
3166 . $HOME/.abcde.conf
3167 fi
3168
3169 # By this time, we need some HTTPGETOPTS already defined.
3170 # If the user has defined a non-default HTTPGET method, we should not be empty.
3171
3172 if [ "$HTTPGETOPTS" = "" ] ; then
3173 case $HTTPGET in
3174 wget) HTTPGETOPTS="-q -nv -e timestamping=off -O -";;
3175 curl) HTTPGETOPTS="-f -s";;
3176 fetch)HTTPGETOPTS="-q -o -";;
3177 ftp) HTTPGETOPTS="-a -V -o - ";;
3178 *) log warning "HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
3179 esac
3180 fi
3181
3182 # If the CDROM has not been set yet, find a suitable one.
3183 # If this is a devfs system, default to /dev/cdroms/cdrom0
3184 # instead of /dev/cdrom
3185 if [ "$CDROM" = "" ] ; then
3186 if [ -e /dev/cdroms/cdrom0 ]; then
3187 CDROM=/dev/cdroms/cdrom0
3188 elif [ -e /dev/cdrom ]; then
3189 CDROM=/dev/cdrom
3190 elif [ -e /dev/cd0c ]; then
3191 CDROM=/dev/cd0c
3192 elif [ -e /dev/acd0c ]; then
3193 CDROM=/dev/acd0c
3194 elif [ -e /dev/disk1 ]; then
3195 CDROM=/dev/disk1
3196 fi
3197 fi
3198
3199 # Parse command line options
3200 #while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPq:r:Rs:S:t:T:vVxw:W: opt ; do
3201 while getopts 1a:bBc:C:d:Defghj:klLmMnNo:pPr:s:S:t:T:UvVxX:w:W:z opt ; do
3202 case "$opt" in
3203 1) ONETRACK=y ;;
3204 a) ACTIONS="$OPTARG" ;;
3205 A) EXPACTIONS="$OPTARG" ;;
3206 b) BATCHNORM=y ;;
3207 B) NOBATCHREPLAYGAIN=y ;;
3208 c) if [ -e "$OPTARG" ] ; then . "$OPTARG" ; else log error "config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
3209 C) DISCID="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
3210 d) CDROM="$OPTARG" ;;
3211 D) set -x ;;
3212 h) usage; exit ;;
3213 e) ERASEENCODEDSTATUS=y ;;
3214 E) ENCODING="$OPTARG" ;;
3215 f) FORCE=y ;;
3216 g) NOGAP=y ;;
3217 i) INLINETAG=y ;;
3218 j) MAXPROCS="$OPTARG" ;;
3219 k) KEEPWAVS=y ;;
3220 l) LOWDISK=y ;;
3221 L) CDDBUSELOCAL=y ;;
3222 n) CDDBAVAIL=n ;;
3223 N) INTERACTIVE=n ;;
3224 m) DOSPLAYLIST=y ;;
3225 M) DOCUE=y ;;
3226 o) OUTPUTTYPE="$OPTARG" ;;
3227 p) PADTRACKS=y ;;
3228 P) USEPIPES=y ;;
3229 q) QUALITYLEVEL="$OPTARG" ;;
3230 r) REMOTEHOSTS="$OPTARG" ;;
3231 R) CDDBLOCALRECURSIVE=y ;;
3232 s) SHOWCDDBFIELDS="$OPTARG" ;;
3233 S) CDSPEEDVALUE="$OPTARG" ;;
3234 t) STARTTRACKNUMBER="$OPTARG" ;;
3235 T) STARTTRACKNUMBER="$OPTARG" ; STARTTRACKNUMBERTAG="y" ;;
3236 U) CDDBPROTO=5 ;;
3237 v)
3238 echo "This is abcde v$VERSION."
3239 echo "Usage: abcde [options] [tracks]"
3240 echo "abcde -h for extra help"
3241 exit
3242 ;;
3243 V) EXTRAVERBOSE="y" ;;
3244 x) EJECTCD="y" ;;
3245 X) CUE2DISCID="$OPTARG" ;;
3246 w) COMMENT="$OPTARG" ;;
3247 W) if echo $OPTARG | grep "[[:digit:]]" > /dev/null 2>&1 ; then
3248 STARTTRACKNUMBER="${OPTARG}01"
3249 STARTTRACKNUMBERTAG="y"
3250 COMMENT="CD${OPTARG}"
3251 DISCNUMBER="${OPTARG}"
3252 else
3253 log error "argument of -W must be integer"
3254 exit 1
3255 fi
3256 ;;
3257 z) DEBUG=y ; CDROMREADERSYNTAX=debug ; EJECTCD="n" ;;
3258 ?) usage; exit ;;
3259 esac
3260 done
3261
3262 shift $(($OPTIND - 1))
3263
3264 # Here it comes the worse part of the whole thing. From here until we start
3265 # ripping, we have a mixture of sanity checks, verifications, default settigs
3266 # and other crazy stuff that interdepends, but hey, someone has to do it.
3267
3268 # If NOCDDBQUERY is set, don't query the CDDB server.
3269 if [ "$NOCDDBQUERY" = "y" ]; then
3270 CDDBAVAIL="n"
3271 fi
3272
3273 # If the user specified a flac file, then switch to special flac mode
3274 if echo "$CDROM" | grep -i '.flac$' > /dev/null 2>&1 ; then
3275 if [ ! -f "$CDROM" ]; then
3276 log error "the defined file for FLAC ripping cannot be found" >&2
3277 exit 1
3278 fi
3279 vecho warning "switching to flac CDROMREADERSYNTAX..."
3280 CDROMREADERSYNTAX=flac
3281 # We have a builtin version of cue2discid...
3282 case "$CUE2DISCID" in
3283 builtin);;
3284 *) NEEDCUE2DISCID=y;;
3285 esac
3286 NEEDMETAFLAC=y
3287 EJECTCD=n
3288 fi
3289
3290 # If the user provided a DISCID, disable eject
3291 if [ -n "$DISCID" ] || [ "$CDROMREADERSYNTAX" = "flac" ]; then EJECTCD=n ; fi
3292
3293 # Check the available cd rippers in the system, from the ones we know.
3294 if [ "$CDROMREADERSYNTAX" = "" ]; then
3295 for DEFAULT_CDROMREADER in $DEFAULT_CDROMREADERS; do
3296 if new_checkexec $DEFAULT_CDROMREADER; then
3297 CDROMREADERSYNTAX=$DEFAULT_CDROMREADER
3298 break
3299 fi
3300 done
3301 if [ "$CDROMREADERSYNTAX" = "" ]; then
3302 log error "no cdreader found in your PATH"
3303 log error "hints: are all dependencies installed? has the \$PATH been modified?"
3304 exit 1
3305 fi
3306 fi
3307
3308 # Decide if we can continue.
3309 if [ "$ONETRACK" = "y" ]; then
3310 # FIXME # remove check as soon as we find out about the other readers
3311 case "$CDROMREADERSYNTAX" in
3312 flac) ;;
3313 cdparanoia) ;;
3314 cdda2wav | icedax) ;;
3315 *) log error "$CDROMREADERSYNTAX does not support ONETRACK mode"
3316 exit 1 ;;
3317 esac
3318 if [ "$BATCHNORM" = "y" ]; then
3319 log warning "BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
3320 BATCHNORM=n
3321 fi
3322 if [ "$NOGAP" = "y" ]; then
3323 log warning "NOGAP mode is not compatible with ONETRACK mode. Disabling..."
3324 NOGAP=n
3325 fi
3326 # It does not matter how many tracks we want. In ONETRACK mode we grab them all
3327 # FIXME # allow ranges of tracks to be selected for onetrack ripping
3328 if [ $# -gt 0 ]; then
3329 log warning "ONETRACK mode selected, grabbing all tracks..."
3330 fi
3331 else
3332 while [ $# -gt 0 ]; do
3333 # Range parsing code courtesy of Vincent Ho
3334 # Cleaned up to use shell built-ins by Charles Steinkuehler
3335 if [ "${1#*[^0-9-]}" != "$1" ]; then
3336 log error "syntax error while processing track numbers"
3337 else
3338 RSTART=${1%%-*}
3339 REND=${1##*-}
3340 while [ ${RSTART:=1} -le ${REND:=0} ] ; do
3341 TRACKQUEUE="$TRACKQUEUE $RSTART"
3342 RSTART=$(( $RSTART + 1 ))
3343 done
3344 fi
3345 shift
3346 done
3347 fi
3348
3349 # List of valid actions: cddb,read,normalize,encode,tag,move,playlist,clean
3350 # List of experimental actions: retag,transcode
3351
3352 # Determine what actions are to be done from $ACTIONS and set the
3353 # following environment variables for them:
3354 DOCDDB=n
3355 DOREAD=n
3356 DONORMALIZE=n
3357 DOPREPROCESS=n
3358 DOENCODE=n
3359 DOPOSTPROCESS=n
3360 DOTAG=n
3361 DOMOVE=n
3362 DOREPLAYGAIN=n
3363 DOPLAYLIST=n
3364 DOCLEAN=n
3365 ## FIXME ## Lets keep compatibility with -M
3366 [ "$DOCUE" != "y" ] && DOCUE=n
3367
3368 for ACTION in $(echo $ACTIONS | tr , \ )
3369 do
3370 case $ACTION in
3371 default) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOCLEAN=y;;
3372 cue) DOCUE=y ; MAKECUEFILE=y ;;
3373 cddb) DOCDDB=y;;
3374 read) DOREAD=y;;
3375 normalize) DONORMALIZE=y; DOREAD=y;;
3376 # preprocess) DOPREPROCESS=y; DOREAD=y;;
3377 encode) DOENCODE=y; DOREAD=y;;
3378 # postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
3379 tag) DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
3380 move) DOMOVE=y; DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
3381 replaygain) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOREPLAYGAIN=y;;
3382 playlist) DOCDDB=y; DOPLAYLIST=y;;
3383 clean) DOCLEAN=y;;
3384 esac
3385 done
3386
3387 if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
3388 # FIXME # should we abort on error or just inform the user?
3389 log warning "selected both normalize and replaygain actions"
3390 fi
3391
3392 for SHOWCDDBFIELD in $(echo $SHOWCDDBFIELDS | tr , \ ); do
3393 case $SHOWCDDBFIELD in
3394 y*|Y*) SHOWCDDBYEAR="y";;
3395 g*|G*) SHOWCDDBGENRE="y";;
3396 *) ;;
3397 esac
3398 done
3399
3400 # At this point a CDROM has to be defined, so we check it exists.
3401 if [ X"$CDROM" != "X" ] ; then
3402 if ( [ "$CDROMREADERSYNTAX" = "cdda2wav" ] || [ "$CDROMREADERSYNTAX" = "icedax" ] ) && [ "$NEEDCDROMID" = "y" ] ; then
3403 if [ "$OSFLAVOUR" = "FBSD" ]; then
3404 if echo "$CDROMID" | grep "^[0-9],[0-9],[0-9]$" >/dev/null 2>&1 ; then :; else
3405 log error "CDROMID not in the right format for $CDROMREADERSYNTAX"
3406 log error "Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
3407 exit 1
3408 fi
3409 fi
3410 elif [ ! -e "$CDROM" -a X"$DOREAD" = "Xy" ]; then
3411 log error "CDROM device cannot be found."
3412 exit 1
3413 fi
3414 # avoid processing if we are not going to hit the CDROM.
3415 elif [ X"$DOREAD" = "Xy" ]; then
3416 log error "CDROM has not been defined or cannot be found"
3417 exit 1
3418 fi
3419
3420 # USEPIPES pre-tests, before we get into more serious stuff
3421 # Not compatible with:
3422 # - multiple outputs
3423 # - normalize
3424 # - lowdisk algorithm
3425 # - anything else?
3426 if [ X"$USEPIPES" = "Xy" ]; then
3427 if [ $(echo "$OUTPUTTYPE" | tr , \ | wc -w ) -gt 1 ]; then
3428 log error "Unix pipes not compatible with multiple outputs"
3429 exit 1
3430 fi
3431 if [ X"$DONORMALIZE" = "Xy" ]; then
3432 log error "Unix pipes not compatible with normalizer"
3433 # FIXME # Do we need to exit or shall we just disable the mode?
3434 exit 1
3435 fi
3436 if [ X"$BATCHNORM" = "Xy" ]; then
3437 log error "Unix pipes not compatible with BATCHNORM encoding"
3438 exit 1
3439 fi
3440 if [ X"$NOGAP" = "Xy" ]; then
3441 log error "Unix pipes not compatible with NOGAP encoding"
3442 exit 1
3443 fi
3444 if [ X"$DOENCODE" = "Xn" ]; then
3445 vecho warning "Disabling Unix pipes since we are not encoding!"
3446 USEPIPES=n
3447 fi
3448 if [ X"$LOWDISK" = "Xy" ]; then
3449 log error "Unix pipes not compatible with lowdisk algorithm"
3450 exit 1
3451 fi
3452 fi
3453
3454 # LOWDISK pre-tests, before we get into more problematic stuff
3455 # Not compatible with anything that needs all the files in the hard disc:
3456 # - BATCHNORM
3457 # - NOGAP lame mode
3458 if [ X"$LOWDISK" = "Xy" ]; then
3459 if [ X"$BATCHNORM" = "Xy" ]; then
3460 log error "Unix pipes not compatible with BATCHNORM encoding"
3461 exit 1
3462 fi
3463 if [ X"$NOGAP" = "Xy" ]; then
3464 log error "Unix pipes not compatible with NOGAP encoding"
3465 exit 1
3466 fi
3467 fi
3468
3469 # BATCHNORM pre-tests, before we get into serious problems
3470 # Not compatible with
3471 if [ "$BATCHNORM" = "y" ] && [ "$DONORMALIZE" = "n" ]; then
3472 vecho warning "Disabling BATCHNORM since we are not normalizing!"
3473 BATCHNORM=n
3474 fi
3475
3476 # Check the encoding format from the ones available in the system, if nothing has been configured.
3477 if [ X"$OUTPUTTYPE" = "X" ]; then
3478 for DEFAULT_OUTPUT in $( echo "$DEFAULT_OUTPUT_BINARIES" | tr , \ ); do
3479 DEFAULT_OUTPUT_FORMAT="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 1)"
3480 DEFAULT_OUTPUT_BINARY="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 2)"
3481 if [ -x $(which $DEFAULT_OUTPUT_BINARY) ] ; then
3482 OUTPUTTYPE=$DEFAULT_OUTPUT_FORMAT
3483 vecho "No default output type defined. Autoselecting $OUTPUTTYPE..." >&2
3484 break
3485 fi
3486 done
3487 if [ X"$OUTPUTTYPE" = "X" ]; then
3488 log error "no encoder found in the PATH"
3489 log error "hints: are all dependencies installed? has the \$PATH been modified?"
3490 exit 1
3491 fi
3492 fi
3493
3494 # Decide which CDROM reader we're gonna use
3495 case "$CDROMREADERSYNTAX" in
3496 cdparanoia|debug)
3497 CDROMREADER="$CDPARANOIA"
3498 CDROMREADEROPTS="$CDPARANOIAOPTS"
3499 ;;
3500 cdda2wav | icedax)
3501 CDROMREADER="$CDDA2WAV"
3502 CDROMREADEROPTS="$CDDA2WAVOPTS"
3503 ;;
3504 dagrab)
3505 CDROMREADER="$DAGRAB"
3506 CDROMREADEROPTS="$DAGRABOPTS"
3507 ;;
3508 cddafs)
3509 CDROMREADER="$CDDAFS"
3510 CDROMREADEROPTS="$CDDAFSOPTS"
3511 ;;
3512 flac)
3513 CDROMREADER="$FLAC"
3514 CDROMREADEROPTS="$FLACOPTS"
3515 ;;
3516 esac
3517
3518 # There's only one normalize...
3519 case "$NORMALIZERSYNTAX" in
3520 default|normalize)
3521 NORMALIZER="$NORMALIZE"
3522 NORMALIZEROPTS="$NORMALIZEOPTS"
3523 ;;
3524 esac
3525
3526 # Allow -o OUTPUT(1):OPTIONS(1),...,OUTPUT(N):OPTIONS(N) mode of operation
3527 if echo "$OUTPUTTYPE" | grep ":" > /dev/null 2>&1 ; then
3528 for OUTPUT in "$(echo "$OUTPUTTYPE" | tr \ \|| tr , \ | tr \| \ )"; do
3529 case "$OUTPUT" in
3530 vorbis:*|ogg:*) OGGENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3531 mp3:*) MP3ENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3532 flac:*) FLACENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3533 spx:*) SPEEXENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3534 mpc:*) MPPENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3535 m4a:*) AACENCODEROPTSCLI="$( echo $OUTPUT | cut -d: -f2- )" ;;
3536 esac
3537 done
3538 for OUTPUT in "$(echo "$OUTPUTTYPE" | tr , \ )"; do
3539 TEMPOUTPUT=$( echo "$OUTPUT" | cut -d: -f1 )
3540 TEMPOUTPUTTYPE="${TEMPOUTPUTTYPE:+$TEMPOUTPUTTYPE,}$TEMPOUTPUT"
3541 done
3542 OUTPUTTYPE="$TEMPOUTPUTTYPE"
3543 fi
3544
3545 # If nothing has been specified, use oggenc for oggs and lame for mp3s and flac
3546 # for flacs and speexenc for speex and mppenc for mpps and faac for m4as
3547
3548 # Getting ready for multiple output changes
3549 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
3550 do
3551 case $OUTPUT in
3552 vorbis|ogg)
3553 [ "$OGGENCODERSYNTAX" = "default" ] && OGGENCODERSYNTAX=oggenc
3554 [ "$DOTAG" = "y" ] && NEEDCOMMENTER=y
3555 [ "$DOREPLAYGAIN" = "y" ] && NEEDVORBISGAIN=y
3556 OGGOUTPUTCONTAINER=ogg
3557 ;;
3558 mp3)
3559 [ "$MP3ENCODERSYNTAX" = "default" ] && MP3ENCODERSYNTAX=lame
3560 [ "$DOTAG" = "y" ] && NEEDTAGGER=y
3561 [ "$DOREPLAYGAIN" = "y" ] && NEEDMP3GAIN=y
3562 ;;
3563 flac)
3564 [ "$FLACENCODERSYNTAX" = "default" ] && FLACENCODERSYNTAX=flac
3565 [ "$DOTAG" = "y" ] && NEEDMETAFLAC=y
3566 [ "$DOREPLAYGAIN" = "y" ] && NEEDMETAFLAC=y
3567 [ "$ONETRACK" = "y" ] && [ "$DOCUE" = "y" ] && NEEDMETAFLAC=y
3568 ;;
3569 spx)
3570 [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc
3571 # [ "$DOREPLAYGAIN" = "y" ] &&
3572 ;;
3573 mpc)
3574 [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc
3575 [ "$DOREPLAYGAIN" = "y" ] && NEEDMPPGAIN=y
3576 ;;
3577 m4a)
3578 [ "$AACENCODERSYNTAX" = "default" ] && AACENCODERSYNTAX=faac
3579 [ "$DOTAG" = "y" ] && CHECKATOMICPARSLEY=y
3580 ;;
3581 wav)
3582 if [ "$KEEPWAVS" = "y" ]; then
3583 vecho "Setting the KEEPWAVS option, since the resulting wav files were requested..."
3584 fi
3585 KEEPWAVS=move
3586 ;;
3587 *) log error "Invalid OUTPUTTYPE defined"
3588 exit 1
3589 ;;
3590 esac
3591 done
3592
3593 # decide which encoder
3594 case "$MP3ENCODERSYNTAX" in
3595 lame)
3596 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$LAMEOPTS}"
3597 MP3ENCODER="$LAME"
3598 ;;
3599 toolame)
3600 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$TOOLAMEOPTS}"
3601 MP3ENCODER="$TOOLAME"
3602 ;;
3603 gogo)
3604 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$GOGOOPTS}"
3605 MP3ENCODER="$GOGO"
3606 ;;
3607 bladeenc)
3608 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$BLADEENCOPTS}"
3609 MP3ENCODER="$BLADEENC"
3610 ;;
3611 l3enc)
3612 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$L3ENCOPTS}"
3613 MP3ENCODER="$L3ENC"
3614 ;;
3615 xingmp3enc)
3616 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$XINGMP3ENCOPTS}"
3617 MP3ENCODER="$XINGMP3ENC"
3618 ;;
3619 mp3enc)
3620 MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$MP3ENCOPTS}"
3621 MP3ENCODER="$MP3ENC"
3622 ;;
3623 esac
3624 case "$OGGENCODERSYNTAX" in
3625 vorbize)
3626 OGGENCODEROPTS="${OGGENCODEROPTSCLI:-$VORBIZEOPTS}"
3627 OGGENCODER="$VORBIZE"
3628 ;;
3629 oggenc)
3630 OGGENCODEROPTS="${OGGENCODEROPTSCLI:-$OGGENCOPTS}"
3631 OGGENCODER="$OGGENC"
3632 ;;
3633 esac
3634 case "$FLACENCODERSYNTAX" in
3635 flac)
3636 FLACENCODEROPTS="${FLACENCODEROPTSCLI:-$FLACOPTS}"
3637 FLACENCODER="$FLAC"
3638 if [ "$DOREPLAYGAIN" = "y" ]; then
3639 FLACENCODEROPTS="${FLACENCODEROPTS} --replay-gain"