Fixes for lots of spelling mistakes from vskytta. Closes issue 68.
[clinton/abcde.git] / abcde
1 #!/bin/bash
2 # Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
3 # Copyright (c) 2003-2006 Jesus Climent <jesus.climent@hispalinux.es>
4 # This code is hereby licensed for public consumption under either the
5 # GNU GPL v2 or greater, or Larry Wall's Artistic license - your choice.
6 #
7 # You should have received a copy of the GNU General Public License along
8 # with this program; if not, write to the Free Software Foundation, Inc.,
9 # 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
10 #
11 # Copyright for this work is to expire January 1, 2010, after which it
12 # shall be public domain.
13 #
14 # $Id$
15
16 VERSION='2.5.3-UNRELEASED'
17
18 usage ()
19 {
20 echo "This is abcde v$VERSION."
21 echo "Usage: abcde [options] [tracks]"
22 echo "Options:"
23 echo "-1 Encode the whole CD in a single file"
24 echo "-a <action1[,action2]...>"
25 echo " Actions to perform:"
26 echo " cddb,read,normalize,encode,tag,move,replaygain,playlist,clean"
27 #echo "-A Experimental actions (retag, transcode)"
28 echo "-b Enable batch normalization"
29 #echo "-B Disable batch replaygain (do file by file)"
30 echo "-c <file>"
31 echo " Specify a configuration file (overrides system and user config files)"
32 echo "-C <discid#>"
33 echo " Specify discid to resume from (only needed if you no longer have the cd)"
34 echo "-d <device>"
35 echo " Specify CDROM device to grab (flac uses a single-track flac file)"
36 echo "-D Debugging mode (equivalent to sh -x abcde)"
37 echo "-e Erase encoded track information from status file"
38 echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
39 echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
40 echo "-h This help information"
41 #echo "-i Tag files while encoding, when possible (local only) -NWY-"
42 echo "-j <#> Number of encoder processes to run at once (localhost)"
43 echo "-k Keep the wav tracks for later use"
44 echo "-l Use low disk space algorithm"
45 echo "-L Use local CDDB storage directory"
46 echo "-m Modify playlist to include CRLF endings, to comply with some players"
47 #echo " WARNING: Deprecated. Use \"cue\" action"
48 #echo "-M Create a CUE file"
49 echo "-n No lookup. Don't query CDDB, just create and use template"
50 echo "-N Noninteractive. Never prompt for anything"
51 echo "-o <type1[,type2]...>"
52 echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav,m4a). Defaults to vorbis"
53 echo "-p Pad track numbers with 0's (if less than 10 tracks)"
54 echo "-P Use UNIX pipes to read+encode without wav files"
55 echo "-q <level>"
56 echo " Set quality level (high,medium,low)"
57 echo "-r <host1[,host2]...>"
58 echo " Also encode on these remote hosts"
59 echo "-s <field>"
60 echo " Show fields from the CDDB info (year,genre)"
61 echo "-S <#> Set the CD speed"
62 echo "-t <#> Start the track numbering at a given number"
63 echo "-T <#> Same as -t but modifies tag numbering"
64 echo "-U Do NOT use UNICODE (UTF8) tags and comments"
65 echo "-v Show version number and exit"
66 echo "-V Be a bit more verbose about what is happening behind the scenes"
67 echo "-x Eject CD after all tracks are read"
68 echo "-w <comment>"
69 echo " Add a comment to the CD tracks"
70 echo "-W <#> Concatenate CDs: -T #01 -w \"CD #\""
71 echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
72 echo ""
73 echo "Tracks is a space-delimited list of tracks to grab."
74 echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
75 echo ""
76 #echo "Double hyphens are used to concatenate tracks"
77 }
78
79 addstatus ()
80 {
81 echo "$@" >> "$ABCDETEMPDIR/status"
82 }
83
84 # log [level] [message]
85 #
86 # log outputs the right message in a common format
87 log ()
88 {
89 BLURB="$1"
90 shift
91 case $BLURB in
92 error) echo "[ERROR] abcde: $@" >&2 ;;
93 warning) echo "[WARNING] $@" >&2 ;;
94 info) echo "[INFO] $@" ;;
95 esac
96 }
97
98 # Functions to replace the need of seq, which is too distribution dependent.
99 f_seq_row ()
100 {
101 i=$1
102 while [ $i -ne `expr $2 + 1` ]
103 do
104 echo $i
105 i=`expr $i + 1`
106 done
107 }
108
109 f_seq_line ()
110 {
111 i=$1
112 if echo $i | grep "[[:digit:]]" > /dev/null 2>&1 ; then
113 while [ $i -ne `expr $2 + 1` ]
114 do
115 printf $i" "
116 i=`expr $i + 1`
117 done
118 echo
119 else
120 log error "syntax error while processing track numbers ($i)"
121 exit 1
122 fi
123 }
124
125 # Functions to replace the need of awk {print $1} and {print $NF}
126 get_first()
127 {
128 if [ X"$1" = "X" ]; then
129 for first in `cat`; do
130 break
131 done
132 else
133 first=$1
134 fi
135 echo $first
136 }
137
138 get_last()
139 {
140 if [ X"$1" = "X" ]; then
141 for stdin in `cat`; do
142 last=$stdin
143 done
144 else
145 for last in $@ ; do :; done
146 fi
147 echo $last
148 }
149
150 # checkstatus [blurb]
151 # Returns "0" if the blurb was found, returns 1 if it wasn't
152 # Puts the blurb content, if available, on stdout.
153 # Otherwise, returns "".
154 checkstatus ()
155 {
156 # Take the last line in the status file if there's multiple matches
157 PATTERN="^$1(=.*)?$"
158 BLURB=$(grep -E $PATTERN "$ABCDETEMPDIR/status" | tail -n 1)
159
160 if [ -z "$BLURB" ]; then
161 # No matches found
162 return 1
163 else
164 # Matches found
165 # See if there's a = in it
166 if [ "$(echo $BLURB | grep -c =)" != "0" ]; then
167 echo "$(echo $BLURB | cut -f2- -d=)"
168 fi
169 return 0
170 fi
171 }
172
173 # checkwarnings [blurb]
174 # Returns "0" if the blurb was found (meaning there was an warning),
175 # returns 1 if it wasn't (yes this is a little backwards).
176 # Does not print the blurb on stdout.
177 # Otherwise, returns "".
178 checkwarnings ()
179 {
180 if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
181 return 1
182 fi
183 # Take the last line in the status file if there's multiple matches
184 PATTERN="^$1(:.*)?$"
185 BLURB="$(grep -E $PATTERN "$ABCDETEMPDIR/warnings" | tail -n 1)"
186
187 if [ -z "$BLURB" ]; then
188 # negative, we did not have a negative...
189 return 1
190 else
191 # affirmative, we had a negative...
192 return 0
193 fi
194 }
195
196 # checkerrors [blurb]
197 # Returns "0" if the blurb was found (meaning there was an error),
198 # returns 1 if it wasn't (yes this is a little backwards).
199 # Does not print the blurb on stdout.
200 # Otherwise, returns "".
201 checkerrors ()
202 {
203 if [ -e "$ABCDETEMPDIR/errors" ]; then :; else
204 return 1
205 fi
206 # Take the last line in the status file if there's multiple matches
207 PATTERN="^$1(:.*)?$"
208 BLURB="$(grep -E $PATTERN "$ABCDETEMPDIR/errors" | tail -n 1)"
209
210 if [ -z "$BLURB" ]; then
211 # negative, we did not have a negative...
212 return 1
213 else
214 # affirmative, we had a negative...
215 return 0
216 fi
217 }
218
219 # page [file]
220 # Finds the right pager in the system to display a file
221 page ()
222 {
223 PAGEFILE="$1"
224 # Use the debian sensible-pager wrapper to pick the pager
225 # user has requested via their $PAGER environment variable
226 if [ -x "/usr/bin/sensible-pager" ]; then
227 /usr/bin/sensible-pager "$PAGEFILE"
228 elif [ -x "$PAGER" ]; then
229 # That failed, try to load the preferred editor, starting
230 # with their PAGER variable
231 $PAGER "$PAGEFILE"
232 # If that fails, check for less
233 elif [ -x /usr/bin/less ]; then
234 /usr/bin/less -f "$PAGEFILE"
235 # more should be on all UNIX systems
236 elif [ -x /bin/more ]; then
237 /bin/more "$PAGEFILE"
238 else
239 # No bananas, just cat the thing
240 cat "$PAGEFILE" >&2
241 fi
242 }
243
244 # run_command [blurb] [command...]
245 # Runs a command, silently if necessary, and updates the status file
246 run_command ()
247 {
248 vvecho "$@"
249 BLURB="$1"
250 shift
251 # See if this is supposed to be silent
252 if [ "$(checkstatus encode-output)" = "loud" ]; then
253 "$@" >&2
254 RETURN=$?
255 else
256 # Special case for SMP, since
257 # encoder output is never displayed, don't mute echos
258 if [ -z "$BLURB" -a "$MAXPROCS" != "1" ]; then
259 "$@" >&2
260 RETURN=$?
261 else
262 "$@" >/dev/null 2>&1
263 RETURN=$?
264 fi
265 fi
266 case "$1" in
267 normalize|normalize-audio)
268 if [ "$RETURN" = "2" ]; then
269 # File was already normalized.
270 RETURN=0
271 fi
272 ;;
273 esac
274 if [ "$RETURN" != "0" ]; then
275 # Put an error in the errors file. For various reasons we
276 # can't capture a copy of the program's output but we can
277 # log what we attempted to execute and the error code
278 # returned by the program.
279 if [ "$BLURB" ]; then
280 TWEAK="$BLURB: "
281 fi
282 echo "${TWEAK}returned code $RETURN: $@" >> "$ABCDETEMPDIR/errors"
283 return $RETURN # Do not pass go, do not update the status file
284 fi
285 if [ "$BLURB" ]; then
286 echo $BLURB >> "$ABCDETEMPDIR/status"
287 fi
288 }
289
290 # relpath() and slash() are Copyright (c) 1999 Stuart Ballard and
291 # distributed under the terms of the GNU GPL v2 or later, at your option
292
293 # Function to determine if a word contains a slash.
294 slash ()
295 {
296 case "$1" in
297 */*) return 0;;
298 *) return 1;;
299 esac
300 }
301
302 # Function to give the relative path from one file to another.
303 # Usage: relpath fromfile tofile
304 # eg relpath music/Artist/Album.m3u music/Artist/Album/Song.mp3
305 # (the result would be Album/Song.mp3)
306 # Output is relative path to $2 from $1 on stdout
307
308 # This code has the following restrictions:
309 # Multiple ////s are not collapsed into single /s, with strange effects.
310 # Absolute paths and ../s are handled wrong in FR (but they work in TO)
311 # If FR is a directory it must have a trailing /
312
313 relpath ()
314 {
315 FR="$1"
316 TO="$2"
317
318 case "$TO" in
319 /*) ;; # No processing is needed for absolute paths
320 *)
321 # Loop through common prefixes, ignoring them.
322 while slash "$FR" && [ "$(echo "$FR" | cut -d/ -f1)" = "$(echo "$TO" | cut -d/ -f1)" ]
323 do
324 FR="$(echo "$FR" | cut -d/ -f2-)"
325 TO="$(echo "$TO" | cut -d/ -f2-)"
326 done
327 # Loop through directory portions left in FR, adding appropriate ../s.
328 while slash "$FR"
329 do
330 FR="$(echo "$FR" | cut -d/ -f2-)"
331 TO="../$TO"
332 done
333 ;;
334 esac
335
336 echo $TO
337 }
338
339 new_checkexec ()
340 {
341 if [ ! "$@" = "" ]; then
342 # Cut off any command-line option we added in
343 X=$(echo $@ | cut -d' ' -f2)
344 if [ "$(which $X)" = "" ]; then
345 return 1
346 elif [ ! -x $(which $X) ]; then
347 return 2
348 fi
349 fi
350 return 0
351 }
352
353 checkexec ()
354 {
355 if [ ! "$@" = "" ]; then
356 # Cut off any command-line option we added in
357 X=$(echo $@ | cut -d' ' -f2)
358 # Test for built-in abcde.function
359 [ "$X" != "${X#abcde.}" ] && type $X >/dev/null 2>&1 && return
360 if [ "$(which $X)" = "" ]; then
361 log error "$X is not in your path." >&2
362 log info "Define the full path to the executable if it exists on your system." >&2
363 if [ -e /etc/debian_release ] ; then
364 case $X in
365 oggenc) MISSING_PACKAGE=vorbis-tools ;;
366 lame|flac) MISSING_PACKAGE=$X ;;
367 esac
368 log info "Hint: apt-get install $MISSING_PACKAGE" >&2
369 fi
370 exit 1
371 elif [ ! -x "$(which $X)" ]; then
372 log error "$X is not executable." >&2
373 exit 1
374 fi
375 fi
376 }
377
378 # diffentries <filename> <max_value> <entry1>,<entry2>
379 # max_value: the range of entries goes from 1 to <max_value>
380 diffentries ()
381 {
382 FILENAME=$1
383 shift
384 local CDDBDIFFCHOICES=$1
385 shift
386 local CDDBDIFFCHOICE="$@"
387 if [ ! X"$DIFF" = "X" ]; then
388 PARSECHOICE1=$(echo $CDDBDIFFCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
389 PARSECHOICE2=$(echo $CDDBDIFFCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
390 if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBDIFFCHOICES ] || \
391 [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBDIFFCHOICES ] || \
392 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
393 echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBDIFFCHOICES" >&2
394 else
395 # We parse the 2 choices to diff, store them in temporary files and diff them.
396 for PARSECHOICE in $(echo $CDDBDIFFCHOICE | tr , \ ); do
397 do_cddbparse "$ABCDETEMPDIR/$FILENAME.$PARSECHOICE" > "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE"
398 done
399 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/$FILENAME.diff"
400 $DIFF $DIFFOPTS "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/$FILENAME.diff"
401 if [ $(cat "$ABCDETEMPDIR/$FILENAME.diff" | wc -l) -ge 24 ]; then
402 page "$ABCDETEMPDIR/$FILENAME.diff"
403 else
404 cat "$ABCDETEMPDIR/$FILENAME.diff" >&2
405 fi
406 fi
407 else
408 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBDIFFCHOICES." >&2
409 fi
410 }
411
412 # getcddbinfo
413 # Finds an specific field from cddbinfo
414 getcddbinfo()
415 {
416 case $1 in
417 TRACKNAME1)
418 TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
419 ;;
420 TRACKNAME)
421 TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
422 ;;
423 TRACK-INFO)
424 grep ^EXTT$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\\n/\n/g'
425 ;;
426 esac
427 }
428
429 # gettracknum
430 # Get the track number we are going to use for different actions
431 gettracknum()
432 {
433 if [ -n "$STARTTRACKNUMBER" ] ; then
434 # Get the trackpadding from the current track
435 CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
436 TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
437 else
438 TRACKNUM=${UTRACKNUM}
439 fi
440 }
441
442 # makeids
443 #
444 # Calculate cddb disc ids without requiring specialized helper programs.
445 # largely copied from cd-discid and musicbrainz examples. some of the steps
446 # don't make sense, but they're necessary to match the ids generated by other
447 # programs.
448 #
449 ## FIXME ## Right now, we get 2 frames more than with cue2discid ??
450 # data@petit:~$ sh /tmp/cue2discid /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac
451 # processing offsetimes 00:00:00 04:47:10 08:20:37 11:46:46 17:45:36 21:41:57 27:32:21 32:03:73 35:39:28 38:27:33 43:50:38 44:42:34
452 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2895
453 # data@petit:~$ metaflac --export-cuesheet-to=- /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac| python /home/data/sources/abcde/trunk/examples/cue2discid
454 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2893
455 #
456 # Variables: OFFSETS, TRACKS, LEADOUT, [LEADIN]
457 makeids ()
458 {
459 if [ X"$LEADOUT" = "X" ]; then
460 log warning "Error trying to calculate disc ids without lead-out information."
461 exit 1
462 fi
463
464 # default to a two second lead-in
465 IDMAGICNUM=150
466 LEADIN=${LEADIN:=150}
467
468 # number of cdframes per second
469 CDFRAMES=75
470
471 # reset cddb checksum for cddb disc-id calululation
472 CDDBCKSUM=0
473
474 COOKEDOFFSETS=""
475 for OFFSET in $(echo $OFFSETS)
476 do
477 COOKEDOFFSETS="${COOKEDOFFSETS} $(($OFFSET + $LEADIN))"
478
479 OFFSETTIME=$(( ($OFFSET + $LEADIN) / $CDFRAMES ))
480 while [ $OFFSETTIME -gt 0 ]; do
481 CDDBCKSUM=$(($CDDBCKSUM + $OFFSETTIME % 10))
482 OFFSETTIME=$(($OFFSETTIME / 10))
483 done
484
485 done
486
487 COOKEDOFFSETS="${COOKEDOFFSETS:1}" # eat the leading space
488
489 PREGAP=$(($(echo $OFFSETS | cut -f1 -d' ')))
490 TOTALTIME=$(( (($LEADOUT + $LEADIN + $PREGAP) / $CDFRAMES) - (($LEADIN + $PREGAP) / $CDFRAMES)))
491
492 case "$CDDBMETHOD" in
493 cddb)
494 printf -v DISCID "%08lx" $(( ($CDDBCKSUM % 0xff) << 24 | $TOTALTIME << 8 | $TRACKS))
495 ;;
496 musicbrainz)
497 # FIXME: don't assume the first track is 1
498 echo "dasd: 1 $TRACKS $LEADIN $LEADOUT $OFFSETS "
499 DISCID=$($MUSICBRAINZ --command calcid --discinfo 1 $TRACKS $LEADIN $LEADOUT $OFFSETS)
500 ;;
501 esac
502
503 TRACKINFO="${DISCID} $((TRACKS)) ${COOKEDOFFSETS} $((($LEADOUT + $LEADIN + $IDMAGICNUM) / $CDFRAMES))"
504 }
505
506 do_replaygain()
507 {
508 if checkstatus replaygain; then :; else
509 run_command "" echo "Adding replaygain information..."
510 for TMPOUTPUT in $( echo $OUTPUTTYPE | tr , \ )
511 do
512 case $TMPOUTPUT in
513 vorbis|ogg)
514 OUTPUT=$OGGOUTPUTCONTAINER
515 ;;
516 flac)
517 OUTPUT=$FLACOUTPUTCONTAINER
518 ;;
519 *)
520 OUTPUT=$TMPOUTPUT
521 ;;
522 esac
523 OUTPUTFILES=""
524 REPLAYINDEX=0
525 for UTRACKNUM in $TRACKQUEUE
526 do
527 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
528 getcddbinfo TRACKNAME
529 splitvarious
530 TRACKFILE="$(mungefilename "$TRACKNAME")"
531 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
532 ALBUMFILE="$(mungefilename "$DALBUM")"
533 GENRE="$(mungegenre "$GENRE")"
534 YEAR=${CDYEAR:-$CDYEAR}
535 gettracknum
536 if [ "$ONETRACK" = "y" ]; then
537 if [ "$VARIOUSARTISTS" = "y" ]; then
538 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
539 else
540 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
541 fi
542 else
543 if [ "$VARIOUSARTISTS" = "y" ]; then
544 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
545 else
546 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
547 fi
548 fi
549 OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
550 (( REPLAYINDEX = $REPLAYINDEX + 1 ))
551 done
552 case "$OUTPUT" in
553 flac)
554 run_command replaygain-flac nice $ENCNICE $METAFLAC $FLACGAINOPTS "${OUTPUTFILES[@]}"
555 #run_command replaygain-flac true
556 ;;
557 vorbis|ogg)
558 run_command replaygain-vorbis nice $ENCNICE $VORBISGAIN $VORBISGAINOPTS "${OUTPUTFILES[@]}"
559 ;;
560 mp3)
561 run_command replaygain-mp3 nice $ENCNICE $MP3GAIN $MP3GAINOPTS "${OUTPUTFILES[@]}"
562 ;;
563 mpc)
564 run_command replaygain-mpc nice $ENCNICE $MPPGAIN --auto "${OUTPUTFILES[@]}"
565 ;;
566 *);;
567 esac
568 done
569 if checkerrors "replaygain-.{3,6}"; then :; else
570 run_command replaygain true
571 fi
572 fi
573 }
574
575 # This code splits the a Various Artist track name from one of the following
576 # forms:
577 #
578 # forward: Artist / Track
579 # forward-dash: Artist - Track
580 # reverse: Track / Artist
581 # reverse-dash: Track - Artist
582 # colon: Artist: Track
583 # trailing-paren: Artist (Track)
584 #
585 # variables used:
586 # VARIOUSARTISTS, VARIOUSARTISTSTYLE, TRACKNAME, TRACKARTIST
587 splitvarious ()
588 {
589 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
590 case "$VARIOUSARTISTSTYLE" in
591 forward)
592 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
593 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
594 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
595 ;;
596 forward-dash)
597 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
598 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
599 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
600 ;;
601 reverse)
602 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
603 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
604 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
605 ;;
606 reverse-dash)
607 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
608 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
609 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
610 ;;
611 colon)
612 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's-: -~-g')"
613 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
614 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
615 ;;
616 trailing-paren)
617 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
618 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
619 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
620 ;;
621 esac
622 elif [ "$VARIOUSARTISTS" = "y" ] && [ "$ONETRACK" = "y" ]; then
623 TRACKARTIST="Various"
624 else
625 TRACKARTIST="$DARTIST"
626 fi
627 }
628
629 do_getgenreid () {
630 local genre=$(echo "${@}" | tr '[A-Z]' '[a-z]')
631 local id=""
632 case ${genre} in
633 "blues") id=0 ;;
634 "classic rock") id=1 ;;
635 "country") id=2 ;;
636 "dance") id=3 ;;
637 "disco") id=4 ;;
638 "funk") id=5 ;;
639 "grunge") id=6 ;;
640 "hip-hop") id=7 ;;
641 "jazz") id=8 ;;
642 "metal") id=9 ;;
643 "new age") id=10 ;;
644 "oldies") id=11 ;;
645 "other") id=12 ;;
646 "pop") id=13 ;;
647 "r&b") id=14 ;;
648 "rap") id=15 ;;
649 "reggae") id=16 ;;
650 "rock") id=17 ;;
651 "techno") id=18 ;;
652 "industrial") id=19 ;;
653 "alternative") id=20 ;;
654 "ska") id=21 ;;
655 "death metal") id=22 ;;
656 "pranks") id=23 ;;
657 "soundtrack") id=24 ;;
658 "euro-techno") id=25 ;;
659 "ambient") id=26 ;;
660 "trip-hop") id=27 ;;
661 "vocal") id=28 ;;
662 "jazz+funk") id=29 ;;
663 "fusion") id=30 ;;
664 "trance") id=31 ;;
665 "classical") id=32 ;;
666 "instrumental") id=33 ;;
667 "acid") id=34 ;;
668 "house") id=35 ;;
669 "game") id=36 ;;
670 "sound clip") id=37 ;;
671 "gospel") id=38 ;;
672 "noise") id=39 ;;
673 "alt. rock") id=40 ;;
674 "bass") id=41 ;;
675 "soul") id=42 ;;
676 "punk") id=43 ;;
677 "space") id=44 ;;
678 "meditative") id=45 ;;
679 "instrum. pop") id=46 ;;
680 "instrum. rock") id=47 ;;
681 "ethnic") id=48 ;;
682 "gothic") id=49 ;;
683 "darkwave") id=50 ;;
684 "techno-indust.") id=51 ;;
685 "electronic") id=52 ;;
686 "pop-folk") id=53 ;;
687 "eurodance") id=54 ;;
688 "dream") id=55 ;;
689 "southern rock") id=56 ;;
690 "comedy") id=57 ;;
691 "cult") id=58 ;;
692 "gangsta") id=59 ;;
693 "top 40") id=60 ;;
694 "christian rap") id=61 ;;
695 "pop/funk"|"pop / funk") id=62 ;;
696 "jungle") id=63 ;;
697 "native american") id=64 ;;
698 "cabaret") id=65 ;;
699 "new wave") id=66 ;;
700 "psychadelic") id=67 ;;
701 "rave") id=68 ;;
702 "showtunes") id=69 ;;
703 "trailer") id=70 ;;
704 "lo-fi") id=71 ;;
705 "tribal") id=72 ;;
706 "acid punk") id=73 ;;
707 "acid jazz") id=74 ;;
708 "polka") id=75 ;;
709 "retro") id=76 ;;
710 "musical") id=77 ;;
711 "rock & roll") id=78 ;;
712 "hard rock") id=79 ;;
713 "folk") id=80 ;;
714 "folk/rock") id=81 ;;
715 "national folk") id=82 ;;
716 "swing") id=83 ;;
717 "fusion") id=84 ;;
718 "bebob") id=85 ;;
719 "latin") id=86 ;;
720 "revival") id=87 ;;
721 "celtic") id=88 ;;
722 "bluegrass") id=89 ;;
723 "avantgarde") id=90 ;;
724 "gothic rock") id=91 ;;
725 "progress. rock") id=92 ;;
726 "psychadel. rock") id=93 ;;
727 "symphonic rock") id=94 ;;
728 "slow rock") id=95 ;;
729 "big band") id=96 ;;
730 "chorus") id=97 ;;
731 "easy listening") id=98 ;;
732 "acoustic") id=99 ;;
733 "humour") id=100 ;;
734 "speech") id=101 ;;
735 "chanson") id=102 ;;
736 "opera") id=103 ;;
737 "chamber music") id=104 ;;
738 "sonata") id=105 ;;
739 "symphony") id=106 ;;
740 "booty bass") id=107 ;;
741 "primus") id=108 ;;
742 "porn groove") id=109 ;;
743 "satire") id=110 ;;
744 "slow jam") id=111 ;;
745 "club") id=112 ;;
746 "tango") id=113 ;;
747 "samba") id=114 ;;
748 "folklore") id=115 ;;
749 "ballad") id=116 ;;
750 "power ballad") id=117 ;;
751 "rhythmic soul") id=118 ;;
752 "freestyle") id=119 ;;
753 "duet") id=120 ;;
754 "punk rock") id=121 ;;
755 "drum solo") id=122 ;;
756 "a capella") id=123 ;;
757 "euro-house") id=124 ;;
758 "dance hall") id=125 ;;
759 "goa") id=126 ;;
760 "drum & bass") id=127 ;;
761 "club-house") id=128 ;;
762 "hardcore") id=129 ;;
763 "terror") id=130 ;;
764 "indie") id=131 ;;
765 "britpop") id=132 ;;
766 "negerpunk") id=133 ;;
767 "polsk punk") id=134 ;;
768 "beat") id=135 ;;
769 "christian gangsta rap") id=136 ;;
770 "heavy metal") id=137 ;;
771 "black metal") id=138 ;;
772 "crossover") id=139 ;;
773 "contemporary christian")id=140 ;;
774 "christian rock") id=141 ;;
775 "merengue") id=142 ;;
776 "salsa") id=143 ;;
777 "thrash metal") id=144 ;;
778 "anime") id=145 ;;
779 "jpop") id=146 ;;
780 "synthpop") id=147 ;;
781 "rock/pop"|"rock / pop") id=148 ;;
782 *) return 1 ;;
783 esac
784 echo ${id}
785 return 0
786 }
787
788 # do_tag [tracknumber]
789 # id3 tags a filename
790 # variables used:
791 # TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC, ATOMICPARSLEY
792 # COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE
793 do_tag ()
794 {
795 COMMENTOUTPUT="$(eval echo ${COMMENT})"
796 if [ -z "$COMMENTOUTPUT" ]; then
797 COMMENTOUTPUT="$(getcddbinfo TRACK-INFO)"
798 fi
799 if [ "$CDDBMETHOD" = "cddb" ]; then
800 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
801 fi
802 run_command '' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
803 # If we want to start the tracks with a given number, we need to modify the
804 # TRACKNUM value before evaluation
805 if [ -n "$STARTTRACKNUMBERTAG" ] ; then
806 gettracknum
807 fi
808 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
809 do
810 case "$OUTPUT" in
811 mp3)
812 # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
813 GENREID=$(do_getgenreid "${CDGENRE}")
814 # Set TPE2 in case we have a Various Artists rip.
815 TPE2=""
816 if [ "$VARIOUSARTISTS" = "y" ]; then
817 TPE2="Various"
818 fi
819
820 case "$ID3SYNTAX" in
821 id3);;
822 eyed3)
823 # FIXME # track numbers in mp3 come with 1/10, so we cannot
824 # happily substitute them with $TRACKNUM
825 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $TAGGER $TAGGEROPTS \
826 --comment=::"$COMMENTOUTPUT" -A "$DALBUM" \
827 -a "$TRACKARTIST" -t "$TRACKNAME" -Y "$CDYEAR" \
828 -G "$GENREID" -n "${TRACKNUM:-$1}" \
829 "${TRACKNUM:+-N $TRACKS}" \
830 "${ENCODING:+--set-encoding=$ENCODING}" \
831 "${TPE2:+--set-user-text-frame=TPE2:$TPE2}" \
832 "$ABCDETEMPDIR/track$1.$OUTPUT"
833 ;;
834 # FIXME # Still not activated...
835 id3ed)
836 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
837 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
838 -a "$DALBUM" -n "$TRACKARTIST" -s "$TRACKNAME" \
839 -y "$CDYEAR" -g "$GENREID" -k "${TRACKNUM:-$1}" \
840 "$ABCDETEMPDIR/track$1.$OUTPUT"
841 ;;
842 *)
843 # FIXME # track numbers in mp3 come with 1/10, so we cannot
844 # happily substitute them with $TRACKNUM
845 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
846 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
847 -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" \
848 -y "$CDYEAR" -g "$GENREID" \
849 -T "${TRACKNUM:-$1}/$TRACKS" \
850 ${TPE2:+--TPE2 "$TPE2"} \
851 "$ABCDETEMPDIR/track$1.$OUTPUT"
852 ;;
853 esac
854 ;;
855 vorbis|ogg)
856 case "$OGGENCODERSYNTAX" in
857 vorbize|oggenc)
858 # vorbiscomment can't do in-place modification, mv the file first
859 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" ]; then
860 mv "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
861 fi
862 (
863 # These are from
864 # http://www.xiph.org/ogg/vorbis/doc/v-comment.html
865
866 echo ARTIST="$TRACKARTIST"
867 echo ALBUM="$DALBUM"
868 echo TITLE="$TRACKNAME"
869 if [ -n "$CDYEAR" ]; then
870 echo DATE="$CDYEAR"
871 fi
872 if [ -n "$CDGENRE" ]; then
873 echo GENRE="$CDGENRE"
874 fi
875 echo TRACKNUMBER=${TRACKNUM:-$1}
876 if [ -n "$DISCNUMBER" ]; then
877 echo DISCNUMBER="$DISCNUMBER"
878 fi
879 echo CDDB=$CDDBDISCID
880 if [ "$(eval echo ${COMMENT})" != "" ]; then
881 case "$COMMENTOUTPUT" in
882 *=*) echo "$COMMENTOUTPUT";;
883 *) echo COMMENT="$COMMENTOUTPUT";;
884 esac
885 fi
886 ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE \
887 $VORBISCOMMENT $VORBISCOMMENTOPTS -w \
888 "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
889 # Doublecheck that the commented file was created
890 # successfully before wiping the original
891 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" ]; then
892 rm -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
893 else
894 mv "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
895 fi
896 ;;
897 esac
898 ;;
899 flac)
900 (
901 echo ARTIST="$TRACKARTIST"
902 echo ALBUM="$DALBUM"
903 echo TITLE="$TRACKNAME"
904 if [ -n "$CDYEAR" ]; then
905 echo DATE="$CDYEAR"
906 fi
907 if [ -n "$CDGENRE" ]; then
908 echo GENRE="$CDGENRE"
909 fi
910 echo TRACKNUMBER="${TRACKNUM:-$1}"
911 if [ -n "$DISCNUMBER" ]; then
912 echo DISCNUMBER="$DISCNUMBER"
913 fi
914 echo CDDB="$CDDBDISCID"
915 if [ "$(eval echo ${COMMENT})" != "" ]; then
916 case "$COMMENTOUTPUT" in
917 *=*) echo "$COMMENTOUTPUT";;
918 *) echo COMMENT="$COMMENTOUTPUT";;
919 esac
920 fi
921 ) | run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
922 ;;
923 spx)
924 run_command tagtrack-$OUTPUT-$1 true
925 ;;
926 mpc)
927 run_command tagtrack-$OUTPUT-$1 true
928 ;;
929 m4a)
930 # Use a temp-file of our choice. --overWrite seems to
931 # case core dumps with AtomicParsley 0.9.0
932 ATOMICTEMPFILE="$ABCDETEMPDIR/track$1.m4a-atomic"
933
934 VARIOUSBOOL="false"
935 if [ "$VARIOUSARTISTS" = "y" ]; then
936 VARIOUSBOOL="true"
937 fi
938
939 #It has to be command file opts for AtomicParsley
940 run_command tagtrack-$OUTPUT-$1 nice $ENCNICE $ATOMICPARSLEY "$ABCDETEMPDIR/track$1.m4a" --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --tracknum ${TRACKNUM:-$1} --year "$CDYEAR" --genre "$CDGENRE" --compilation $VARIOUSBOOL --comment "$COMMENTOUTPUT" --output $ATOMICTEMPFILE
941 if [ -f $ATOMICTEMPFILE ]; then
942 mv "$ATOMICTEMPFILE" "$ABCDETEMPDIR/track$1.m4a"
943 fi
944 ;;
945 wav)
946 run_command tagtrack-$OUTPUT-$1 true
947 ;;
948 esac
949 done
950 if checkerrors "tagtrack-(.{3,6})-$1"; then :; else
951 run_command tagtrack-$1 true
952 fi
953
954 }
955
956 # do_nogap_encode
957 # variables used:
958 # OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
959 do_nogap_encode ()
960 {
961 # The commands here don't go through run_command because they're never
962 # supposed to be silenced
963 echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
964 for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
965 do
966 case "$OUTPUT" in
967 mp3)
968 case "$MP3ENCODERSYNTAX" in
969 lame|toolame)
970 (
971 cd "$ABCDETEMPDIR"
972 TRACKFILES=
973 for UTRACKNUM in $TRACKQUEUE
974 do
975 TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
976 done
977 nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
978 RETURN=$?
979 if [ "$RETURN" != "0" ]; then
980 echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
981 else
982 for UTRACKNUM in $TRACKQUEUE
983 do
984 run_command encodetrack-$OUTPUT-$UTRACKNUM true
985 #run_command encodetrack-$UTRACKNUM true
986 done
987 fi
988 )
989 ;;
990 esac
991 ;;
992 esac
993 done
994 if checkerrors "nogap-encode"; then :; else
995 if [ ! "$KEEPWAVS" = "y" ] ; then
996 if [ ! "$KEEPWAVS" = "move" ] ; then
997 rm -f "$IN"
998 fi
999 fi
1000 fi
1001 # Other encoders fall through to normal encoding as the tracks have not
1002 # been entered in the status file.
1003 }
1004
1005 # do_encode [tracknumber] [hostname]
1006 # If no hostname is specified, encode locally
1007 # variables used:
1008 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1009 do_encode ()
1010 {
1011 if [ "$USEPIPES" = "y" ]; then
1012 case "$OUTPUT" in
1013 mp3)
1014 TEMPARG="PIPE_$MP3ENCODERSYNTAX"
1015 ;;
1016 vorbis|ogg)
1017 TEMPARG="PIPE_$OGGENCODERSYNTAX"
1018 ;;
1019 flac)
1020 TEMPARG="PIPE_$FLACENCODERSYNTAX"
1021 ;;
1022 spx)
1023 TEMPARG="PIPE_$SPEEXENCODER"
1024 ;;
1025 mpc)
1026 TEMPARG="PIPE_$MPPENCODER"
1027 ;;
1028 m4a)
1029 TEMPARG="PIPE_$AACENCODERSYNTAX"
1030 ;;
1031 esac
1032 IN="$( eval echo "\$$TEMPARG" )"
1033 else
1034 IN="$ABCDETEMPDIR/track$1.wav"
1035 case "$OUTPUT" in
1036 mp3)
1037 case "$MP3ENCODERSYNTAX" in
1038 # FIXME # check if mp3enc needs -if for pipes
1039 # FIXME # I have not been able to find a working mp3enc binary
1040 mp3enc)
1041 FILEARG="-if $IN"
1042 ;;
1043 *)
1044 FILEARG="$IN"
1045 ;;
1046 esac
1047 ;;
1048 *)
1049 FILEARG="$IN"
1050 ;;
1051 esac
1052 fi
1053 # We need IN to proceed, if we are not using pipes.
1054 if [ -s "$IN" -o X"$USEPIPES" = "Xy" ] ; then
1055 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1056 do
1057 case "$TMPOUTPUT" in
1058 vorbis|ogg)
1059 OUTPUT=$OGGOUTPUTCONTAINER
1060 ;;
1061 flac)
1062 OUTPUT=$FLACOUTPUTCONTAINER
1063 ;;
1064 *)
1065 OUTPUT=$TMPOUTPUT
1066 ;;
1067 esac
1068 OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1069 if [ "$NOGAP" = "y" ] && checkstatus encodetrack-$OUTPUT-$1 ; then
1070 continue
1071 fi
1072 if [ X"$USEPIPES" = "Xy" ]; then
1073 RUN_COMMAND=""
1074 # We need a way to store the creation of the files when using PIPES
1075 RUN_COMMAND_PIPES="run_command encodetrack-$OUTPUT-$1 true"
1076 # When pipping it does not make sense to have a higher nice for
1077 # reading than for encoding, since it will be hold by the
1078 # encoding process. Setting an effective nice, to calm down a
1079 # bit the reading process.
1080 EFFECTIVE_NICE=$READNICE
1081 else
1082 run_command '' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
1083 RUN_COMMAND="run_command encodetrack-$OUTPUT-$1"
1084 EFFECTIVE_NICE=$ENCNICE
1085 fi
1086 case "$OUTPUT" in
1087 mp3)
1088 case "$2" in
1089 %local*%)
1090 case "$MP3ENCODERSYNTAX" in
1091 lame|toolame|gogo) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
1092 bladeenc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
1093 l3enc|xingmp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
1094 # FIXME # Relates to the previous FIXME since it might need the "-if" removed.
1095 mp3enc) $RUN_COMMAND nice $EFFECTIVE_NICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
1096 esac
1097 ;;
1098 *)
1099 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
1100 ;;
1101 esac
1102 ;;
1103 vorbis|ogg)
1104 case "$2" in
1105 %local*%)
1106 case "$OGGENCODERSYNTAX" in
1107 vorbize) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
1108 oggenc) $RUN_COMMAND nice $EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
1109 esac
1110 ;;
1111 *)
1112 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev/null 2>&1
1113 ;;
1114 esac
1115 ;;
1116 flac)
1117 case "$2" in
1118 %local*%)
1119 case "$FLACENCODERSYNTAX" in
1120 flac) $RUN_COMMAND nice $EFFECTIVE_NICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
1121 esac
1122 ;;
1123 *)
1124 vecho -n "DISTMP3:"
1125 vecho "$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
1126 $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev/null 2>&1
1127 ;;
1128 esac
1129 ;;
1130 spx)
1131 if [ "$(eval echo ${COMMENT})" != "" ]; then
1132 case "$COMMENT" in
1133 *=*) ;;
1134 *) COMMENT="COMMENT=$COMMENT" ;;
1135 esac
1136 fi
1137 # Tag the file at encode time, as it can't be done after encoding.
1138 if [ "$DOTAG" = "y" ]; then
1139 $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" ${COMMENT:+--comment "$COMMENT"} "$IN" "$OUT"
1140 else
1141 $RUN_COMMAND nice $EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
1142 fi
1143 ;;
1144 mpc)
1145 # MPP/MP+(Musepack) format (.mpc) is done locally, with inline
1146 # tagging.
1147 # I tried compiling the mppenc from corecodecs.org and got some
1148 # errors, so I have not tried it myself.
1149 ## FIXME ## Needs some cleanup to determine if an empty tag sent
1150 ## FIXME ## to the encoder ends up empty.
1151 $RUN_COMMAND nice $EFFECTIVE_NICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
1152 ;;
1153 m4a)
1154 # Tag the file at encode time, as it can't be done after encoding.
1155 if [ "$DOTAG" = "y" ]; then
1156 $RUN_COMMAND nice $EFFECTIVE_NICE $AACENCODER $AACENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -o "$OUT" "$IN"
1157
1158 else
1159 $RUN_COMMAND nice $ENCNICE $AACENCODER $AACENCODEROPTS -o "$OUT" "$IN"
1160 fi
1161 ;;
1162 wav)
1163 # In case of wav output we need nothing. Just keep the wavs.
1164 ;;
1165 esac
1166 $RUN_COMMAND_PIPES
1167 done
1168 # Only remove .wav if the encoding succeeded
1169 if checkerrors "encodetrack-(.{3,6})-$1"; then :; else
1170 run_command encodetrack-$1 true
1171 if [ ! "$KEEPWAVS" = "y" ] ; then
1172 if [ ! "$KEEPWAVS" = "move" ] ; then
1173 rm -f "$IN"
1174 fi
1175 fi
1176 fi
1177 else
1178 run_command "" echo "HEH! The file we were about to encode disappeared:"
1179 run_command "" echo ">> $IN"
1180 run_command encodetrack-$1 false
1181 fi
1182 }
1183
1184 # do_preprocess [tracknumber]
1185 # variables used:
1186 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1187 #do_preprocess ()
1188 #{
1189 # IN="$ABCDETEMPDIR/track$1.wav"
1190 # # We need IN to proceed.
1191 # if [ -s "$IN" ] ; then
1192 # for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1193 # do
1194 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1195 # run_command '' echo "Pre-processing track $1 of $TRACKS..."
1196 # case "$POSTPROCESSFORMAT" in
1197 # all|wav*)
1198 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $WAV_PRE $IF $OF ;;
1199 # mp3)
1200 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $MP3_PRE $IF $OF ;;
1201 # ogg)
1202 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $OGG_PRE $IF $OF ;;
1203 # flac)
1204 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $FLAC_PRE $IF $OF ;;
1205 # spx)
1206 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $SPX_PRE $IF $OF ;;
1207 # esac
1208 # done
1209 # # Only remove .wav if the encoding succeeded
1210 # if checkerrors "preprocess-(.{3,4})-$1"; then
1211 # run_command preprocess-$1 false
1212 # else
1213 # run_command preprocess-$1 true
1214 # fi
1215 # else
1216 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1217 # echo "HEH! The file we were about to pre-process disappeared:"
1218 # echo ">> $IN"
1219 # fi
1220 # run_command preprocess-$1 false
1221 # fi
1222 #}
1223
1224
1225 # do_postprocess [tracknumber]
1226 # variables used:
1227 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1228 #do_postprocess ()
1229 #{
1230 # for POSTPROCESSFORMAT in $(echo $POSTPROCESSFORMATS | tr , \ )
1231 # do
1232 # IN="$ABCDETEMPDIR/track$1.$POSTPROCESSFORMAT"
1233 # # We need IN to proceed.
1234 # if [ -s "$IN" ] ; then
1235 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1236 # run_command '' echo "Post-processing track $1 of $TRACKS..."
1237 # case "$POSTPROCESSFORMAT" in
1238 # mp3)
1239 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $MP3_POST $IF $OF ;;
1240 # ogg)
1241 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $OGG_POST $IF $OF ;;
1242 # flac)
1243 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $FLAC_POST $IF $OF ;;
1244 # spx)
1245 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $SPX_POST $IF $OF ;;
1246 # esac
1247 # # Only remove .wav if the encoding succeeded
1248 # if checkerrors "postprocess-(.{3,4})-$1"; then
1249 # run_command postprocess-$1 false
1250 # else
1251 # run_command postprocess-$1 true
1252 # fi
1253 # else
1254 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1255 # echo "HEH! The file we were about to post-process disappeared:"
1256 # echo ">> $IN"
1257 # fi
1258 # run_command postprocess-$1 false
1259 # fi
1260 # done
1261 #}
1262
1263 # do_single_gain
1264 # variables used:
1265 # FIXME #
1266 do_single_gain ()
1267 {
1268 :
1269 }
1270
1271 # do_batch_gain
1272 # variables used:
1273 # MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
1274 # FIXME #
1275 do_batch_gain ()
1276 {
1277 # The commands here don't go through run_command because they're never supposed to be silenced
1278 echo "Batch analizing gain in tracks: $TRACKQUEUE"
1279 (
1280 cd "$ABCDETEMPDIR"
1281 BLURB=
1282 TRACKFILES=
1283 for UTRACKNUM in $TRACKQUEUE
1284 do
1285 MP3FILES="$TRACKFILES track$UTRACKNUM.mp3"
1286 done
1287 # FIXME # Hard-coded batch option!
1288 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1289 RETURN=$?
1290 if [ "$RETURN" != "0" ]; then
1291 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1292 else
1293 for UTRACKNUM in $TRACKQUEUE
1294 do
1295 echo normalizetrack-$UTRACKNUM >> status
1296 done
1297 fi
1298 )
1299 }
1300
1301 # do_batch_normalize
1302 # variables used:
1303 # NORMALIZER, NORMALIZEROPTS
1304 do_batch_normalize ()
1305 {
1306 # The commands here don't go through run_command because they're never supposed to be silenced
1307 echo "Batch normalizing tracks: $TRACKQUEUE"
1308 (
1309 cd "$ABCDETEMPDIR"
1310 BLURB=
1311 TRACKFILES=
1312 for UTRACKNUM in $TRACKQUEUE
1313 do
1314 TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
1315 done
1316 # XXX: Hard-coded batch option!
1317 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1318 RETURN=$?
1319 if [ "$RETURN" != "0" ]; then
1320 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1321 else
1322 for UTRACKNUM in $TRACKQUEUE
1323 do
1324 echo normalizetrack-$UTRACKNUM >> status
1325 done
1326 fi
1327 )
1328 }
1329
1330 # do_normalize [tracknumber]
1331 # variables used:
1332 # TRACKS, TRACKNAME, NORMALIZER, NORMALIZEROPTS
1333 do_normalize ()
1334 {
1335 IN="$ABCDETEMPDIR/track$1.wav"
1336 if [ -e "$IN" ] ; then
1337 run_command '' echo "Normalizing track $1 of $TRACKS: $TRACKNAME..."
1338 run_command normalizetrack-$1 $NORMALIZER $NORMALIZEROPTS "$IN"
1339 else
1340 if [ "$(checkstatus encode-output)" = "loud" ]; then
1341 echo "HEH! The file we were about to normalize disappeared:"
1342 echo ">> $IN"
1343 fi
1344 run_command normalizetrack-$1 false "File $IN was not found"
1345 fi
1346 }
1347
1348 # do_move [tracknumber]
1349 # Deduces the outfile from environment variables
1350 # Creates directory if necessary
1351 # variables used:
1352 # TRACKNUM, TRACKNAME, TRACKARTIST, DALBUM, OUTPUTFORMAT, CDGENRE, CDYEAR
1353 do_move ()
1354 {
1355 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1356 do
1357 # For now, set OUTPUT as TMPOUTPUT, and then change it once we have
1358 # defined the OUTPUTFILE:
1359 OUTPUT="$TMPOUTPUT"
1360
1361 # Create ALBUMFILE, ARTISTFILE, TRACKFILE
1362 # Munge filenames as follows:
1363 # ' ' -> '_'
1364 # '/' -> '_'
1365 # ''' -> ''
1366 # '?' -> ''
1367 # Eat control characters
1368 ALBUMFILE="$(mungefilename "$DALBUM")"
1369 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1370 TRACKFILE="$(mungefilename "$TRACKNAME")"
1371 GENRE="$(mungegenre "$GENRE")"
1372 YEAR=${CDYEAR:-$CDYEAR}
1373 # If we want to start the tracks with a given number, we need to modify
1374 # the TRACKNUM value before evaluation
1375 gettracknum
1376 # Supported variables for OUTPUTFORMAT are GENRE, YEAR, ALBUMFILE,
1377 # ARTISTFILE, TRACKFILE, and TRACKNUM.
1378 if [ "$ONETRACK" = "y" ]; then
1379 if [ "$VARIOUSARTISTS" = "y" ]; then
1380 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
1381 else
1382 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
1383 fi
1384 else
1385 if [ "$VARIOUSARTISTS" = "y" ]; then
1386 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
1387 else
1388 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
1389 fi
1390 fi
1391 if checkerrors "tagtrack-$OUTPUT-$1"; then :; else
1392 # Once we know the specific output was successful, we can change
1393 # the OUTPUT to the value containing the container
1394 case $TMPOUTPUT in
1395 vorbis|ogg)
1396 OUTPUT=$OGGOUTPUTCONTAINER
1397 ;;
1398 flac)
1399 OUTPUT=$FLACOUTPUTCONTAINER
1400 ;;
1401 *)
1402 OUTPUT=$TMPOUTPUT
1403 ;;
1404 esac
1405 # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
1406 OUTPUTFILEDIR="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
1407 case $OUTPUT in
1408 wav)
1409 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1410 # FIXME # introduce warnings?
1411 :
1412 else
1413 # mkdir -p shouldn't return an error if the directory already exists
1414 mkdir -p "$OUTPUTFILEDIR"
1415 run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1416 if checkstatus movetrack-output-$OUTPUT; then :; else
1417 run_command movetrack-output-$OUTPUT true
1418 fi
1419 fi
1420 ;;
1421 *)
1422 # mkdir -p shouldn't return an error if the directory already exists
1423 mkdir -p "$OUTPUTFILEDIR"
1424 run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1425 if checkstatus movetrack-output-$OUTPUT; then :; else
1426 run_command movetrack-output-$OUTPUT true
1427 fi
1428 ;;
1429 esac
1430 # Lets move the cue file
1431 if CUEFILE=$(checkstatus cuefile) >/dev/null ; then
1432 if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
1433 if checkstatus movecue-$OUTPUT; then :; else
1434 # Silence the Copying output since it overlaps with encoding processes...
1435 #run_command '' vecho "Copying cue file to its destination directory..."
1436 if checkstatus onetrack >/dev/null ; then
1437 case $OUTPUT in
1438 wav)
1439 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1440 # We dont have the dir, since it was not created before.
1441 :
1442 else
1443 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1444 fi
1445 ;;
1446 # NOTE: Creating a cue file with the 3-char-extension files is to comply with
1447 # http://brianvictor.tripod.com/mp3cue.htm#details
1448 [a-z0-9][a-z0-9][a-z0-9])
1449 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1450 ;;
1451 *)
1452 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT.cue"
1453 ;;
1454 esac
1455 else
1456 run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTFILEDIR/$CUEFILE"
1457 fi
1458 echo movecue-$OUTPUT >> "$ABCDETEMPDIR/status"
1459 fi
1460 fi
1461 fi
1462 fi
1463 done
1464 }
1465
1466 # do_playlist
1467 # Create the playlist if wanted
1468 # Variables used:
1469 # PLAYLISTFORMAT, PLAYLISTDATAPREFIX, VAPLAYLISTFORMAT, VAPLAYLISTDATAPREFIX,
1470 # VARIOUSARTISTS, OUTPUTDIR
1471 do_playlist ()
1472 {
1473 for TMPOUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1474 do
1475 case $TMPOUTPUT in
1476 vorbis|ogg)
1477 OUTPUT=$OGGOUTPUTCONTAINER
1478 ;;
1479 flac)
1480 OUTPUT=$FLACOUTPUTCONTAINER
1481 ;;
1482 *)
1483 OUTPUT=$TMPOUTPUT
1484 ;;
1485 esac
1486 # Create a playlist file for the playlist data to go into.
1487 # We used to wipe it out if it existed. Now we request permision if interactive.
1488 for LASTTRACK in $TRACKQUEUE; do :; done
1489 ALBUMFILE="$(mungefilename "$DALBUM")"
1490 ARTISTFILE="$(mungefilename "$DARTIST")"
1491 GENRE="$(mungegenre "$GENRE")"
1492 YEAR=${CDYEAR:-$CDYEAR}
1493 if [ "$VARIOUSARTISTS" = "y" ] ; then
1494 PLAYLISTFILE="$(eval echo "$VAPLAYLISTFORMAT")"
1495 else
1496 PLAYLISTFILE="$(eval echo "$PLAYLISTFORMAT")"
1497 fi
1498 FINALPLAYLISTDIR="$(dirname "$OUTPUTDIR/$PLAYLISTFILE")"
1499 mkdir -p "$FINALPLAYLISTDIR"
1500 if [ -s "$OUTPUTDIR/$PLAYLISTFILE" ]; then
1501 echo -n "Erase, Append to, or Keep the existing playlist file? [e/a/k] (e): " >&2
1502 if [ "$INTERACTIVE" = "y" ]; then
1503 while [ "$DONE" != "y" ]; do
1504 read ERASEPLAYLIST
1505 case $ERASEPLAYLIST in
1506 e|E|a|A|k|K) DONE=y ;;
1507 "") ERASEPLAYLIST=e ; DONE=y ;;
1508 *) ;;
1509 esac
1510 done
1511 else
1512 echo e >&2
1513 ERASEPLAYLIST=e
1514 fi
1515 # Once we erase the playlist, we use append to create the new one.
1516 [ "$ERASEPLAYLIST" = "e" -o "$ERASEPLAYLIST" = "E" ] && rm -f "$OUTPUTDIR/$PLAYLISTFILE" && ERASEPLAYLIST=a
1517 else
1518 # The playlist does not exist, so we can safelly use append to create the new list
1519 ERASEPLAYLIST=a
1520 fi
1521 if [ "$ERASEPLAYLIST" = "a" -o "$ERASEPLAYLIST" = "A" ]; then
1522 touch "$OUTPUTDIR/$PLAYLISTFILE"
1523 for UTRACKNUM in $TRACKQUEUE
1524 do
1525 # Shares some code with do_move since the filenames have to match
1526 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
1527 getcddbinfo TRACKNAME
1528 splitvarious
1529 TRACKFILE="$(mungefilename "$TRACKNAME")"
1530 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1531 ALBUMFILE="$(mungefilename "$DALBUM")"
1532 # If we want to start the tracks with a given number, we need to modify the
1533 # TRACKNUM value before evaluation
1534 gettracknum
1535 if [ "$VARIOUSARTISTS" = "y" ]; then
1536 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT\"")"
1537 else
1538 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT\"")"
1539 fi
1540 if [ "$VARIOUSARTISTS" = "y" ]; then
1541 if [ "$VAPLAYLISTDATAPREFIX" ] ; then
1542 echo ${VAPLAYLISTDATAPREFIX}$OUTPUTFILE.$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1543 else
1544 relpath "$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1545 fi
1546 else
1547 if [ "$PLAYLISTDATAPREFIX" ]; then
1548 echo ${PLAYLISTDATAPREFIX}$OUTPUTFILE.$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1549 else
1550 relpath "$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1551 fi
1552 fi
1553 done
1554 fi
1555 ## this will convert the playlist to have CRLF line-endings, if specified
1556 ## (some hardware players insist on CRLF endings)
1557 if [ "$DOSPLAYLIST" = "y" ]; then
1558 awk '{sub("\r$",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
1559 # mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
1560 cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" | sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
1561 fi
1562 echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
1563 done
1564 }
1565
1566 # abcde.cue2discid
1567 # This function reads a cuefile on stdin and writes an extended
1568 # cddb query on stdout. Any PREGAP for track 1 is properly
1569 # handled, although cue files embedded in FLAC files do not
1570 # appear to properly store the PREGAP setting. :(
1571 abcde.cue2discid () {
1572
1573 cddb_sum () {
1574 val=$1
1575 ret=0
1576 while [ $val -gt 0 ] ; do
1577 ret=$(( $ret + ( $val % 10) ))
1578 val=$(( $val / 10 ))
1579 done
1580 echo $ret
1581 }
1582
1583 msf2lba () {
1584 OIFS="$IFS"
1585 IFS=":"
1586 set -- $1
1587 IFS="$OIFS"
1588 local first second third
1589 first=$(expr ${1} + 0 )
1590 second=$(expr ${2} + 0 )
1591 third=$(expr ${3} + 0 )
1592
1593 echo $(( ((($first * 60) + $second) * 75) + $third ))
1594 }
1595
1596 OFFSET=150
1597 PREGAP=0
1598 LEADOUT=0
1599 LEADIN=88200
1600 i=0
1601 N=0
1602
1603 while read line ; do
1604 set -- $line
1605 case "$1" in
1606 TRACK) i=$(( i + 1 ))
1607 ;;
1608 INDEX) if [ "$2" -eq 1 ] ; then
1609 LBA=$(msf2lba $3)
1610 START=$(( $LBA + $PREGAP + $OFFSET ))
1611 eval TRACK$i=$START
1612 X=$(cddb_sum $(( $START / 75 )) )
1613 N=$(( $N + $X ))
1614 fi
1615 ;;
1616 PREGAP) PREGAP=$(msf2lba $2)
1617 ;;
1618 REM) case "$2" in
1619 FLAC__lead-out)
1620 LEADOUT=$(( $4 / 588 ))
1621 ;;
1622 FLAC__lead-in)
1623 LEADIN=$(( $3 / 588 ))
1624 ;;
1625 esac
1626 ;;
1627 esac
1628
1629 done
1630
1631 TRACKS=$i
1632 LEADOUT=$(( $LEADOUT + $LEADIN ))
1633
1634 LENGTH=$(( $LEADOUT/75 - $TRACK1/75 ))
1635 DISCID=$(( ( $N % 255 ) * 2**24 | $LENGTH * 2**8 | $TRACKS ))
1636 printf "%08x %i" $DISCID $TRACKS
1637
1638 j=1
1639 while [ $j -le $TRACKS ] ; do
1640 eval echo -n "\" \$TRACK$j\""
1641 j=$((j+1))
1642 done
1643 echo " $(( $LEADOUT / 75 ))"
1644 }
1645
1646 # abcde.mkcue
1647 # abcde.mkcue [--wholedisk]
1648 # This creates a cuefile directly from the extended discid information
1649 # The --wholedisk option controls whether we're ripping data from the
1650 # start of track one or from the start of the disk (usually, but not
1651 # always the same thing!)
1652 #
1653 # Track one leadin/pregap (if any) handeling:
1654 # --wholedisk specified:
1655 # TRACK 01 AUDIO
1656 # INDEX 00 00:00:00
1657 # INDEX 01 <pregap value>
1658 # Remaining track index values unchanged from disc TOC
1659 #
1660 # --wholedisk not specified
1661 # TRACK 01 AUDIO
1662 # PREGAP <pregap value>
1663 # INDEX 01 00:00:00
1664 # Remaining track index values offset by <pregap value>
1665 #
1666 # Variables used:
1667 # TRACKINFO
1668 abcde.mkcue () {
1669
1670 echomsf () {
1671 printf "$1%02i:%02i:%02i\n" $(($2/4500)) $((($2/75)%60)) $(($2%75))
1672 }
1673
1674 local MODE DISCID TRACKS
1675 local i OFFSET LBA
1676 local CUEWAVFILE
1677
1678 if [ "$1" = --wholedisc ] ; then
1679 MODE=INDEX
1680 else
1681 MODE=PREGAP
1682 fi
1683
1684 vecho "One track is $ONETRACK"
1685 TRACKFILE="$(mungefilename "$TRACKNAME")"
1686 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
1687 ALBUMFILE="$(mungefilename "$DALBUM")"
1688 if [ "$ONETRACK" = "y" ]; then
1689 if [ "$VARIOUSARTISTS" = "y" ]; then
1690 CUEWAVFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
1691 else
1692 CUEWAVFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
1693 fi
1694 vecho "Cue wav file is $CUEWAVFILE"
1695 else
1696 CUEWAVFILE="dummy.wav"
1697 fi
1698
1699 set -- $TRACKINFO
1700
1701 DISCID=$1
1702 TRACKS=$2
1703 shift 2
1704
1705 echo REM DISCID $DISCID
1706 echo FILE \""$CUEWAVEFILE"\" WAVE
1707
1708 if [ $1 -ne 150 ] && [ $MODE = "PREGAP" ] ; then
1709 OFFSET=$1
1710 else
1711 OFFSET=150
1712 fi
1713
1714 i=1
1715 while [ $i -le "$TRACKS" ] ; do
1716 LBA=$(( $1 - $OFFSET ))
1717 printf " TRACK %02i AUDIO\n" $i
1718 if [ $i -eq 1 -a $1 -ne 150 ] ; then
1719 if [ $MODE = PREGAP ] ; then
1720 echomsf " PREGAP " $(($OFFSET-150))
1721 else
1722 echo " INDEX 00 00:00:00"
1723 fi
1724 fi
1725 echomsf " INDEX 01 " $LBA
1726 i=$(($i+1))
1727 shift
1728 done
1729 }
1730
1731 # do_discid
1732 # This essentially the start of things
1733 do_discid ()
1734 {
1735 # Query the CD to get the track info, unless the user specified -C
1736 # or we are using some actions which do not need the CDDB data at all
1737 #if [ ! X"$EXPACTIONS" = "X" ]; then
1738 # :
1739 #elif [ -z "$DISCID" ]; then
1740 if [ -z "$DISCID" ]; then
1741 vecho -n "Getting CD track info... "
1742 # In OSX, unmount the disc before a query
1743 if [ "$OSFLAVOUR" = "OSX" ]; then
1744 diskutil unmount ${CDROM#/dev/}
1745 fi
1746 case "$CDROMREADERSYNTAX" in
1747 flac)
1748 if $METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" > /dev/null 2>&1 ; then
1749 case "$CUE2DISCID" in
1750 # FIXME # right now we have 2 cue2discid internal
1751 # implementations: builtin and abcde.cue2discid. Test
1752 # both of them and decide which one we want to use.
1753 builtin)
1754 #vecho "Using builtin cue2discid implementation..."
1755 CUESHEET="$(metaflac $METAFLACOPTS --export-cuesheet-to=- "$CDROM")"
1756
1757 #TRACKS=$(echo $CUESHEET | grep -E "TRACK \+[[:digit:]]\+ \+AUDIO" |wc -l)
1758 #TRACKS=0
1759 OFFSETTIMES=( $(echo "$CUESHEET" | sed -n -e's/\ *INDEX 01\ \+//p' ) )
1760 TRACKS=${#OFFSETTIMES[@]}
1761 unset OFFSETS
1762 #echo "processing offsetimes ${OFFSETTIMES[@]}"
1763 for OFFSETTIME in ${OFFSETTIMES[@]}; do
1764 OFFSETS="$OFFSETS $(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))"
1765 #OFFSETS[${#OFFSETS[*]}]=$(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))
1766 done
1767
1768 LEADOUT=$(( $(echo "$CUESHEET" | grep lead-out | get_last) * 75 / 44100 ))
1769 LEADIN=$(( $(echo "$CUESHEET" | grep lead-in | get_last) * 75 / 44100 ))
1770 makeids
1771 ;;
1772 *)
1773 #vecho "Using external python cue2discid implementation..."
1774 TRACKINFO=$($METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" | $CUE2DISCID)
1775 ;;
1776 esac
1777 else
1778 log error "the input flac file does not contain a cuesheet."
1779 exit 1
1780 fi
1781 ;;
1782 # cdparanoia|debug)
1783 # CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1784 # RET=$?
1785 # if [ ! "$RET" = "0" ];then
1786 # log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1787 # fi
1788 #
1789 # TRACKS="$(echo "$CDPARANOIAOUTPUT" | grep -E '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1790 # CDPARANOIAAUDIOTRACKS="$TRACKS"
1791 #
1792 # LEADOUT="$(echo "$CDPARANOIAOUTPUT" | grep -Eo '^TOTAL[[:space:]]+([[:digit:]]+)' | get_last)"
1793 # OFFSETS="$(echo "$CDPARANOIAOUTPUT" | sed -n -e's/^ .* \([0-9]\+\) \[.*/\1/p')"
1794 # makeids
1795 # ;;
1796 *)
1797 case "$CDDBMETHOD" in
1798 cddb) TRACKINFO=$($CDDISCID "$CDROM") ;;
1799 musicbrainz) TRACKINFO=$($MUSICBRAINZ --command id --device "$CDROM") ;;
1800 esac
1801 ;;
1802 esac
1803 # Make sure there's a CD in there by checking cd-discid's return code
1804 if [ ! "$?" = "0" ]; then
1805 if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
1806 log error "cuesheet information from the flac file could not be read."
1807 log error "Perhaps the flac file does not contain a cuesheet?."
1808 exit 1
1809 else
1810 log error "CD could not be read. Perhaps there's no CD in the drive?"
1811 exit 1
1812 fi
1813 fi
1814 # In OSX, remount the disc again
1815 if [ "$OSFLAVOUR" = "OSX" ]; then
1816 diskutil mount ${CDROM#/dev/}
1817 fi
1818 WEHAVEACD=y
1819 DISCID=$(echo $TRACKINFO | cut -f1 -d' ')
1820 else
1821 TRACKINFO=$(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
1822 fi
1823
1824 # Get a full enumeration of tracks, sort it, and put it in the TRACKQUEUE.
1825 # This needs to be done now because a section of the resuming code will need
1826 # it later.
1827
1828 # get the number of digits to pad TRACKNUM with - we'll use this later
1829 # a CD can only hold 99 tracks, but since we support a feature for starting
1830 # numbering the tracks from a given number, we might need to set it as a
1831 # variable for the user to define... or obtain it somehow.
1832 if [ "$PADTRACKS" = "y" ] ; then
1833 TRACKNUMPADDING=2
1834 fi
1835
1836 ABCDETEMPDIR="$WAVOUTPUTDIR/abcde.$(echo $TRACKINFO | cut -f1 -d' ')"
1837 if [ -z "$TRACKQUEUE" ]; then
1838 if [ ! "$STRIPDATATRACKS" = "n" ]; then
1839 case "$CDROMREADERSYNTAX" in
1840 cdparanoia|debug)
1841 if [ "$WEHAVEACD" = "y" ]; then
1842 vecho "Querying the CD for audio tracks..."
1843 CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1844 RET=$?
1845 if [ ! "$RET" = "0" ];then
1846 log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1847 fi
1848 TRACKS="$(echo "$CDPARANOIAOUTPUT" | grep -E '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1849 CDPARANOIAAUDIOTRACKS="$TRACKS"
1850 else
1851 # Previous versions of abcde would store the tracks on a file, instead of the status record.
1852 if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
1853 echo cdparanoia-audio-tracks=$( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
1854 rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
1855 fi
1856 if [ -f "$ABCDETEMPDIR/status" ] && TRACKS=$(checkstatus cdparanoia-audio-tracks); then :; else
1857 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1858 fi
1859 fi
1860 ;;
1861 *) TRACKS=$(echo $TRACKINFO | cut -f2 -d' ') ;;
1862 esac
1863 else
1864 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1865 fi
1866 if echo "$TRACKS" | grep "[[:digit:]]" > /dev/null 2>&1 ;then :;else
1867 log info "The disc does not contain any tracks. Giving up..."
1868 exit 0
1869 fi
1870 echo -n "Grabbing entire CD - tracks: "
1871 if [ ! "$PADTRACKS" = "y" ] ; then
1872 TRACKNUMPADDING=$(echo -n $TRACKS | wc -c | tr -d ' ')
1873 fi
1874 TRACKS=$(printf "%0.${TRACKNUMPADDING}d" $TRACKS)
1875 X=0
1876 while [ "$X" -ne "$TRACKS" ]
1877 do
1878 X=$(printf "%0.${TRACKNUMPADDING}d" $(expr $X + 1))
1879 TRACKQUEUE=$(echo $TRACKQUEUE $X)
1880 done
1881 echo $TRACKQUEUE
1882 else
1883 TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
1884 # User-supplied track queue.
1885 # Weed out non-numbers, whitespace, then sort and weed out duplicates
1886 TRACKQUEUE=$(echo $TRACKQUEUE | sed 's-[^0-9 ]--g' | tr ' ' '\n' | grep -v ^$ | sort -n | uniq | tr '\n' ' ' | sed 's- $--g')
1887 # Once cleaned, obtain the highest value in the trackqueue for number padding
1888 for LASTTRACK in $TRACKQUEUE; do :; done
1889 if [ ! "$PADTRACKS" = "y" ] ; then
1890 TRACKNUMPADDING=$(echo -n $LASTTRACK | wc -c | tr -d ' ')
1891 fi
1892 # Now we normalize the trackqueue
1893 for TRACK in $TRACKQUEUE ; do
1894 TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
1895 PADTRACKQUEUE=$(echo $PADTRACKQUEUE $TRACKNUM)
1896 done
1897 TRACKQUEUE=$PADTRACKQUEUE
1898 echo Grabbing tracks: "$TRACKQUEUE"
1899 fi
1900
1901 QUEUEDTRACKS=$(echo $TRACKQUEUE | wc -w | tr -d ' ')
1902
1903 # We have the discid, create a temp directory after it to store all the temp
1904 # info
1905
1906 if [ -e "$ABCDETEMPDIR" ]; then
1907 echo -n "abcde: attempting to resume from $ABCDETEMPDIR"
1908 # It already exists, see if it's a directory
1909 if [ ! -d "$ABCDETEMPDIR" ]; then
1910 # This is a file/socket/fifo/device/etc, not a directory
1911 # Complain and exit
1912 echo >&2
1913 echo "abcde: file $ABCDETEMPDIR already exists and does not belong to abcde." >&2
1914 echo "Please investigate, remove it, and rerun abcde." >&2
1915 exit 1
1916 fi
1917 echo -n .
1918 # It's a directory, let's see if it's writable by us
1919 if [ ! -r "$ABCDETEMPDIR" ] || [ ! -w "$ABCDETEMPDIR" ] || [ ! -x "$ABCDETEMPDIR" ]; then
1920 # Nope, complain and exit
1921 echo >&2
1922 echo "abcde: directory $ABCDETEMPDIR already exists and is not writeable." >&2
1923 echo "Please investigate, remove it, and rerun abcde." >&2
1924 exit 1
1925 fi
1926 echo .
1927 # See if it's populated
1928 if [ ! -f "$ABCDETEMPDIR/discid" ]; then
1929 # Wipe and start fresh
1930 echo "abcde: $ABCDETEMPDIR/discid not found. Abcde must remove and recreate" >&2
1931 echo -n "this directory to continue. Continue [y/N]? " >&2
1932 if [ "$INTERACTIVE" = "y" ]; then
1933 read ANSWER
1934 else
1935 echo y >&2
1936 ANSWER=y
1937 fi
1938 if [ "$ANSWER" != "y" ]; then
1939 exit 1
1940 fi
1941 rm -rf "$ABCDETEMPDIR" || exit 1
1942 mkdir -p "$ABCDETEMPDIR"
1943 if [ "$?" -gt "0" ]; then
1944 # Directory already exists or could not be created
1945 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1946 exit 1
1947 fi
1948 else
1949 # Everything is fine. Check for ^encodetracklocation-
1950 # and encode-output entries in the status file and
1951 # remove them. These are not relevant across sessions.
1952 if [ -f "$ABCDETEMPDIR/status" ]; then
1953 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
1954 grep -v ^encodetracklocation- < "$ABCDETEMPDIR/status.old" \
1955 | grep -v ^encode-output > "$ABCDETEMPDIR/status"
1956 fi
1957 # Remove old error messages
1958 if [ -f "$ABCDETEMPDIR/errors" ]; then
1959 rm -f "$ABCDETEMPDIR/errors"
1960 fi
1961 fi
1962 else
1963 # We are starting from scratch
1964 mkdir -p "$ABCDETEMPDIR"
1965 if [ "$?" -gt "0" ]; then
1966 # Directory already exists or could not be created
1967 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1968 exit 1
1969 fi
1970 cat /dev/null > "$ABCDETEMPDIR/status"
1971 # Store the abcde version in the status file.
1972 echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
1973 fi
1974 if [ X"$DOCUE" = "Xy" -a X"$WEHAVEACD" = "Xy" ]; then
1975 if checkstatus cuefile > /dev/null 2>&1 ; then :; else
1976 CUEFILE=cue-$(echo "$TRACKINFO" | cut -f1 -d' ').txt
1977 vecho "Creating cue file..."
1978 case $CDROMREADERSYNTAX in
1979 flac)
1980 if $METAFLAC --export-cuesheet-to=- "$CDROM" > "$ABCDETEMPDIR/$CUEFILE"; then
1981 echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
1982 else
1983 log warning "the input flac file does not contain a cuesheet."
1984 fi
1985 ;;
1986 *)
1987 if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
1988 echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
1989 else
1990 log warning "reading the CUE sheet is still considered experimental"
1991 log warning "and there was a problem with the CD reading. abcde will continue,"
1992 log warning "but consider reporting the problem to the abcde author"
1993 fi
1994 ;;
1995 esac
1996 fi
1997 fi
1998 # If we got the CDPARANOIA status and it is not recorded, save it now
1999 if [ -n "$CDPARANOIAAUDIOTRACKS" ]; then
2000 if checkstatus cdparanoia-audio-tracks > /dev/null 2>&1; then :; else
2001 echo cdparanoia-audio-tracks=$CDPARANOIAAUDIOTRACKS >> "$ABCDETEMPDIR/status"
2002 fi
2003 fi
2004
2005 # Create the discid file
2006 echo "$TRACKINFO" > "$ABCDETEMPDIR/discid"
2007 if checkstatus cddbmethod > /dev/null 2>&1 ; then :; else
2008 echo "cddbmethod=$CDDBMETHOD" >> "$ABCDETEMPDIR/status"
2009 fi
2010 }
2011
2012 # do_cleancue
2013 # Create a proper CUE file based on the CUE file we created before.
2014 do_cleancue()
2015 {
2016 if CUEFILE_IN="$ABCDETEMPDIR"/$(checkstatus cuefile); then
2017 CUEFILE_OUT=$CUEFILE_IN.out
2018 ### FIXME ### checkstatus cddb
2019 if [ -e "$CDDBDATA" ]; then
2020 vecho "Adding metadata to the cue file..."
2021 # FIXME It doesn't preserve spaces! Why?
2022 # FIXME parse $track into PERFORMER and TITLE - abcde already has code for this?
2023 n=1
2024 echo "PERFORMER \"$DARTIST\"" >> "$CUEFILE_OUT"
2025 echo "TITLE \"$DALBUM\"" >> "$CUEFILE_OUT"
2026 # Set IFS to <newline> to prevent read from swallowing spaces and tabs
2027 OIFS="$IFS"
2028 IFS='
2029 '
2030 cat "$CUEFILE_IN" | while read line
2031 do
2032 if echo "$line" | grep "INDEX 01" > /dev/null 2>&1 ; then
2033 # FIXME # Possible patch: remove the line above, uncomment the 2 lines below.
2034 # echo "$line" >> "$CUEFILE_OUT"
2035 # if echo "$line" | grep "^[[:space:]]*TRACK" > /dev/null 2>&1 ; then
2036 eval track="\$TRACK$n"
2037 n=$(expr $n + 1)
2038 echo " TITLE \"$track\"" >> "$CUEFILE_OUT"
2039 # When making a single-track rip, put the
2040 # actual file name into the file declaration
2041 # in the cue file so that it is usable by
2042 # music players and the like
2043 elif [ "$ONETRACK" = "y" ] &&
2044 echo "$line" | grep '^FILE "dummy.wav" WAVE' > /dev/null 2>&1 ; then
2045
2046 TRACKFILE="$(mungefilename "$TRACKNAME")"
2047 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
2048 ALBUMFILE="$(mungefilename "$DALBUM")"
2049
2050 if [ "$VARIOUSARTISTS" = "y" ]; then
2051 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
2052 else
2053 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\" | sed -e 's@^.*/@@').$OUTPUT"
2054 fi
2055
2056 echo "FILE \"$OUTPUTFILE\" WAVE" >> "$CUEFILE_OUT"
2057 continue
2058 fi
2059 # FIXME # If the lines above are uncommented, remove the line below.
2060 echo "$line" >> "$CUEFILE_OUT"
2061 done
2062 IFS="$OIFS"
2063 mv "$CUEFILE_OUT" "$CUEFILE_IN"
2064 echo "cleancuefile" >> "$ABCDETEMPDIR/status"
2065 fi
2066 fi
2067 }
2068
2069 # do_cddbparse
2070 # Parses a CDDB file and outputs the title and the track names.
2071 # Variables: CDDBFILE
2072 do_cddbparse ()
2073 {
2074 CDDBPARSEFILE="$1"
2075 # List out disc title/author and contents
2076 if [ "$ONETRACK" = "y" ]; then
2077 vecho "ONETRACK mode selected: displaying only the title of the CD..."
2078 fi
2079 echo "---- $(grep DTITLE "${CDDBPARSEFILE}" | cut '-d=' -f2- | tr -d \\r\\n ) ----"
2080 if [ X"$SHOWCDDBYEAR" = "Xy" ]; then
2081 PARSEDYEAR=$(grep DYEAR "${CDDBPARSEFILE}" | cut '-d=' -f2-)
2082 if [ ! X"$PARSEDYEAR" = "X" ]; then
2083 echo "Year: $PARSEDYEAR"
2084 fi
2085 fi
2086 if [ X"$SHOWCDDBGENRE" = "Xy" ]; then
2087 PARSEDGENRE=$(grep DGENRE "${CDDBPARSEFILE}" | cut '-d=' -f2-)
2088 if [ ! X"$PARSEDGENRE" = "X" ]; then
2089 echo "Genre: $PARSEDGENRE"
2090 fi
2091 fi
2092 if [ ! "$ONETRACK" = "y" ]; then
2093 for TRACK in $(f_seq_row 1 $TRACKS)
2094 do
2095 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "${CDDBPARSEFILE}" | cut -f2- -d= | tr -d \\r\\n)"
2096 done
2097 fi
2098 }
2099
2100 # do_localcddb
2101 # Check for a local CDDB file, and report success
2102 do_localcddb ()
2103 {
2104 if checkstatus cddb-readcomplete && checkstatus cddb-choice >/dev/null; then :; else
2105
2106 CDDBLOCALSTATUS="notfound"
2107 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2108 USELOCALRESP="y"
2109
2110 if [ "$CDDBLOCALRECURSIVE" = "y" ]; then
2111 CDDBLOCALRESULTS="$(find ${CDDBLOCALDIR} -name "${CDDBDISCID}" -type f 2> /dev/null)"
2112 if [ ! "${CDDBLOCALRESULTS}" = "" ]; then
2113 if (( $(echo "${CDDBLOCALRESULTS}" | wc -l) == 1 )); then
2114 CDDBLOCALFILE="${CDDBLOCALRESULTS}"
2115 CDDBLOCALMATCH=single
2116 elif (( $(echo "${CDDBLOCALRESULTS}" | wc -l) > 1 )); then
2117 CDDBLOCALMATCH=multiple
2118 fi
2119 else
2120 CDDBLOCALMATCH=none
2121 fi
2122 elif [ "$CDDBLOCALMATCH" = "none" ] && [ -r "${CDDBLOCALDIR}/${CDDBDISCID}" ]; then
2123 CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
2124 CDDBLOCALMATCH=single
2125 else
2126 CDDBLOCALMATCH=none
2127 fi
2128
2129 # If the user has selected to check a local CDDB repo, we proceed with it
2130 case $CDDBLOCALMATCH in
2131 multiple)
2132 echo "Processing multiple matching CDDB entries..." > "$ABCDETEMPDIR/cddblocalchoices"
2133 X=0
2134 echo "$CDDBLOCALRESULTS" | while read RESULT ; do
2135 X=$(expr $X + 1)
2136 # List out disc title/author and contents
2137 CDDBLOCALREAD="$ABCDETEMPDIR/cddblocalread.$X"
2138 cat "$RESULT" > "${CDDBLOCALREAD}"
2139 {
2140 echo -n "#$X: "
2141 do_cddbparse "${CDDBLOCALREAD}"
2142 echo ""
2143 ##FIXME## QUICK HACK !!!!
2144 if [ ! "$INTERACTIVE" = "y" ]; then break ; fi
2145 } >> "$ABCDETEMPDIR/cddblocalchoices"
2146 done
2147 if [ $(cat "$ABCDETEMPDIR/cddblocalchoices" | wc -l) -ge 24 ] && [ "$INTERACTIVE" = "y" ]; then
2148 page "$ABCDETEMPDIR/cddblocalchoices"
2149 else
2150 # It's all going to fit in one page, cat it
2151 cat "$ABCDETEMPDIR/cddblocalchoices" >&2
2152 fi
2153 CDDBLOCALCHOICES=$( echo "$CDDBLOCALRESULTS" | wc -l )
2154 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2155 CDDBLOCALCHOICENUM=-1
2156 if [ "$INTERACTIVE" = "y" ]; then
2157 while [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; do
2158 echo -n "Locally cached CDDB entries found. Which one would you like to use (0 for none)? [0-$CDDBLOCALCHOICES]: " >&2
2159 read CDDBLOCALCHOICE
2160 [ x"$CDDBLOCALCHOICE" = "x" ] && CDDBLOCALCHOICE="1"
2161 # FIXME # Introduce diff's
2162 if echo $CDDBLOCALCHOICE | grep -E "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2163 diffentries cddblocalread "$CDDBLOCALCHOICES" "$CDDBLOCALCHOICE"
2164 elif echo $CDDBLOCALCHOICE | grep -E "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2165 # Make sure we get a valid choice
2166 CDDBLOCALCHOICENUM=$(echo $CDDBLOCALCHOICE | xargs printf %d 2>/dev/null)
2167 if [ $CDDBLOCALCHOICENUM -lt 0 ] || [ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; then
2168 echo "Invalid selection. Please choose a number between 0 and $CDDBLOCALCHOICES." >&2
2169 fi
2170 fi
2171 done
2172 else
2173 ### FIXME ###
2174 #echo "Selected ..."
2175 CDDBLOCALRESP=y
2176 CDDBLOCALCHOICENUM=1
2177 fi
2178 if [ ! "$CDDBLOCALCHOICENUM" = "0" ]; then
2179 #echo "Using local copy of CDDB data"
2180 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2181 cat "$ABCDETEMPDIR/cddblocalread.$CDDBLOCALCHOICENUM" >> "$ABCDETEMPDIR/cddbread.1"
2182 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2183 echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
2184 do_cddbparse "$ABCDETEMPDIR/cddbread.1" > "$ABCDETEMPDIR/cddbchoices"
2185 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2186 CDDBLOCALSTATUS="found"
2187 else
2188 #echo "Not using local copy of CDDB data"
2189 CDDBLOCALSTATUS="notfound"
2190 fi
2191 ;;
2192 single)
2193 # List out disc title/author and contents
2194 do_cddbparse "${CDDBLOCALFILE}"
2195 #if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
2196 # echo -n "Embedded cuesheet entry found, use it [Y/n]? " >&2
2197 #else
2198 echo -n "Locally cached CDDB entry found, use it [Y/n]? " >&2
2199 #fi
2200 if [ "$INTERACTIVE" = "y" ]; then
2201 read USELOCALRESP
2202 while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
2203 echo -n 'Invalid selection. Please answer "y" or "n": ' >&2
2204 read USELOCALRESP
2205 done
2206 [ x"$USELOCALRESP" = "x" ] && USELOCALRESP="y"
2207 else
2208 echo "y" >&2
2209 fi
2210 if [ "$USELOCALRESP" = "y" ]; then
2211 #echo "Using local copy of CDDB data"
2212 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2213 cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
2214 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2215 echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
2216 do_cddbparse "${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
2217 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2218 CDDBLOCALSTATUS="single"
2219 else
2220 #echo "Not using local copy of CDDB data"
2221 CDDBLOCALSTATUS="notfound"
2222 fi
2223 ;;
2224 none)
2225 CDDBLOCALSTATUS="notfound"
2226 ;;
2227 esac
2228 fi
2229 }
2230
2231 # do_cdtext
2232 # Try to read CD-Text from the drive using icedax / cdda2wav
2233 do_cdtext ()
2234 {
2235 if new_checkexec icedax; then
2236 CDTEXT_READER=icedax
2237 elif new_checkexec cdda2wav; then
2238 CDTEXT_READER=cdda2wav
2239 else
2240 # Didn't find either, bail
2241 return 0
2242 fi
2243
2244 if [ "$OSFLAVOUR" = "OSX" ] ; then
2245 # Hei, we have to unmount the device before running anything like cdda2wav/icedax in OSX
2246 diskutil unmount ${CDROM#/dev/}
2247 # Also, in OSX the cdrom device for cdda2wav/icedax changes...
2248 CDDA2WAVCDROM="IODVDServices"
2249 elif [ "$OSFLAVOUR" = "FBSD" ] ; then
2250 CDDA2WAVCDROM="$CDROMID"
2251 else
2252 if [ "$CDROMID" = "" ]; then
2253 CDDA2WAVCDROM="$CDROM"
2254 else
2255 CDDA2WAVCDROM="$CDROMID"
2256 fi
2257 fi
2258
2259 # Do we have CD-Text on the disc (and can the drive read it?)
2260 ${CDTEXT_READER} -J -N -D ${CDDA2WAVCDROM} > "$ABCDETEMPDIR/cd-text" 2>&1
2261 grep -q '^CD-Text: detected' "$ABCDETEMPDIR/cd-text"
2262 ERRORCODE=$?
2263 if [ $ERRORCODE -ne 0 ]; then
2264 # No CD-Text found, bail
2265 return 0
2266 fi
2267
2268 rm -f "$ABCDETEMPDIR/cddbchoices"
2269 CDDBCHOICES=1
2270 # Make an empty template
2271 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.1"
2272 echo -n "Retrieved 1 CD-Text match..." >> "$ABCDETEMPDIR/cddbchoices"
2273 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2274 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2275 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2276 ATITLE=$(grep -e '^Album title:' "${ABCDETEMPDIR}/cd-text" | cut -c14- )
2277 echo "200 none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
2278 # List out disc title/author and contents
2279 echo ---- ${ATITLE} ---- >> "$ABCDETEMPDIR/cddbchoices"
2280 for TRACK in $(f_seq_row 1 $TRACKS)
2281 do
2282 TRACKM1=$(($TRACK - 1))
2283 TITLE="$(grep -E ^Track\ +$TRACK: "$ABCDETEMPDIR/cd-text" | tr -d \\r\\n | sed 's~^Track ..: .~~g;'"s~'$~~g")"
2284 echo "$TRACK: $TITLE" >> "$ABCDETEMPDIR/cddbchoices"
2285 sed -i "s~^TTITLE${TRACKM1}=.*~TTITLE${TRACKM1}=${TITLE}~" "$ABCDETEMPDIR/cddbread.1"
2286 done
2287 sed -i "s~^DTITLE=.*~DTITLE=${ATITLE}~" "$ABCDETEMPDIR/cddbread.1"
2288 echo >> "$ABCDETEMPDIR/cddbchoices"
2289 echo "cdtext-readcomplete" >> "$ABCDETEMPDIR/status"
2290 }
2291
2292 # do_musicbrainz
2293 # Work with the musicbrainz WS API, then transform the results here so
2294 # they look (very) like the results from CDDB. Maybe not the best way
2295 # to go, but it Works For Me (TM)
2296
2297 do_musicbrainz ()
2298 {
2299 if checkstatus musicbrainz-readcomplete; then :; else
2300 vecho "Obtaining Musicbrainz results..."
2301 # If MB is to be used, interpret the query results and read all
2302 # the available entries.
2303 rm -f "$ABCDETEMPDIR/cddbchoices"
2304 CDDBCHOICES=1 # Overridden by multiple matches
2305 MBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2306 ${MUSICBRAINZ} --command data --discid "$MBDISCID" --workdir "$ABCDETEMPDIR"
2307
2308 # The helper script will write disc matches out to
2309 # cddbread.*. Count how many we have
2310 if [ ! -f "${ABCDETEMPDIR}/cddbread.1" ] ; then
2311 # No matches. Use the normal cddb template for the user to
2312 # fill in
2313 echo "No Musicbrainz match." >> "$ABCDETEMPDIR/cddbchoices"
2314 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2315 # List out disc title/author and contents of template
2316 echo ---- Unknown Artist / Unknown Album ---- >> "$ABCDETEMPDIR/cddbchoices"
2317 UNKNOWNDISK=y
2318 for TRACK in $(f_seq_row 1 $TRACKS)
2319 do
2320 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2321 done
2322 echo >> "$ABCDETEMPDIR/cddbchoices"
2323 echo cddb-read-0-complete >> "$ABCDETEMPDIR/status"
2324 echo cddb-choice=0 >> "$ABCDETEMPDIR/status"
2325 echo 503 > "$ABCDETEMPDIR/cddbquery"
2326 else
2327 # We have some matches
2328 NUM_RESPONSES=$(echo "${ABCDETEMPDIR}"/cddbread.* | wc -w)
2329 if [ "$NUM_RESPONSES" -eq 1 ] ; then
2330 # One exact match
2331 echo -n "Retrieved 1 Musicbrainz match..." >> "$ABCDETEMPDIR/cddbchoices"
2332 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2333 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2334 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2335 ATITLE=$(grep -e '^DTITLE=' "${ABCDETEMPDIR}/cddbread.1" | cut -c8- )
2336 echo "200 none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
2337 # List out disc title/author and contents
2338 echo ---- ${ATITLE} ---- >> "$ABCDETEMPDIR/cddbchoices"
2339 for TRACK in $(f_seq_row 1 $TRACKS)
2340 do
2341 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2342 done
2343 echo >> "$ABCDETEMPDIR/cddbchoices"
2344 else
2345 echo "210 Found exact matches, list follows (until terminating .)" > "$ABCDETEMPDIR/cddbquery"
2346 echo "Multiple Musicbrainz matches:" >> "$ABCDETEMPDIR/cddbchoices"
2347 for file in "$ABCDETEMPDIR"/cddbread.*
2348 do
2349 X=$(echo $file | sed 's/^.*cddbread\.//g')
2350 echo cddb-read-$X-complete >> "$ABCDETEMPDIR/status"
2351 ATITLE=$(grep -e '^DTITLE=' "${ABCDETEMPDIR}"/cddbread.$X | cut -c8- )
2352 echo "none ${ATITLE}" >> "$ABCDETEMPDIR/cddbquery"
2353 # List out disc title/author and contents
2354 echo "#$X: ---- ${ATITLE} ----" >> "$ABCDETEMPDIR/cddbchoices"
2355 for TRACK in $(f_seq_row 1 $TRACKS)
2356 do
2357 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2358 done
2359 echo >> "$ABCDETEMPDIR/cddbchoices"
2360 done
2361 echo "." >> "$ABCDETEMPDIR/cddbquery"
2362 fi
2363 fi
2364 echo "musicbrainz-readcomplete" >> "$ABCDETEMPDIR/status"
2365 fi
2366 }
2367
2368 # do_cddbstat
2369 do_cddbstat ()
2370 {
2371 # Perform CDDB protocol version check if it hasn't already been done
2372 if checkstatus cddb-statcomplete; then :; else
2373 if [ "$CDDBAVAIL" = "n" ]; then
2374 ERRORCODE=no_query
2375 echo 503 > "$ABCDETEMPDIR/cddbstat"
2376 else
2377 rc=1
2378 CDDBUSER=$(echo $HELLOINFO | cut -f1 -d'@')
2379 CDDBHOST=$(echo $HELLOINFO | cut -f2- -d'@')
2380 while test $rc -eq 1 -a $CDDBPROTO -ge 3; do
2381 vecho "Checking CDDB server status..."
2382 $CDDBTOOL stat $CDDBURL $CDDBUSER $CDDBHOST $CDDBPROTO > "$ABCDETEMPDIR/cddbstat"
2383 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
2384 case "$RESPONSECODE" in
2385 210) # 210 OK, status information follows (until terminating `.')
2386 rc=0
2387 ;;
2388 501) # 501 Illegal CDDB protocol level: <n>.
2389 CDDBPROTO=`expr $CDDBPROTO - 1`
2390 ;;
2391 *) # Try a cddb query, since freedb2.org doesn't support the stat or ver commands
2392 # FreeDB TESTCD disc-id is used for query
2393 $CDDBTOOL query $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST 03015501 1 296 344 > "$ABCDETEMPDIR/cddbstat"
2394 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut -f1 -d' ')
2395 case "$RESPONSECODE" in
2396 2??) # Server responded, everything seems OK
2397 rc=0
2398 ;;
2399 esac
2400 ;;
2401 esac
2402 done
2403 if test $rc -eq 1; then
2404 CDDBAVAIL="n"
2405 fi
2406 fi
2407 echo cddb-statcomplete >> "$ABCDETEMPDIR/status"
2408 fi
2409 }
2410
2411
2412 # do_cddbquery
2413 do_cddbquery ()
2414 {
2415 CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
2416 CDDBLOCALFILE="${CDDBLOCALDIR}/${CDDBDISCID}"
2417
2418 # Perform CDDB query if it hasn't already been done
2419 if checkstatus cddb-querycomplete; then :; else
2420 if [ "$CDDBAVAIL" = "n" ]; then
2421 ERRORCODE=no_query
2422 echo 503 > "$ABCDETEMPDIR/cddbquery"
2423 # The default CDDBLOCALSTATUS is "notfound"
2424 # This part will be triggered if the user CDDB repo does not
2425 # contain the entry, or if we are not trying to use the repo.
2426 else
2427 vecho "Querying the CDDB server..."
2428 CDDBUSER=$(echo $HELLOINFO | cut -f1 -d'@')
2429 CDDBHOST=$(echo $HELLOINFO | cut -f2- -d'@')
2430 $CDDBTOOL query $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $TRACKINFO > "$ABCDETEMPDIR/cddbquery"
2431 ERRORCODE=$?
2432 case $ERRORCODE in
2433 0) # success
2434 ;;
2435 12|13|14)
2436 # no match found in database,
2437 # wget/fetch error, or user requested not to use CDDB
2438 # Make up an error code (503) that abcde
2439 # will recognize in do_cddbread
2440 # and compensate by making a template
2441 echo 503 > "$ABCDETEMPDIR/cddbquery"
2442 ;;
2443 *) # strange and unknown error
2444 echo ERRORCODE=$ERRORCODE
2445 echo "abcde: $CDDBTOOL returned unknown error code"
2446 ;;
2447 esac
2448 fi
2449 echo cddb-querycomplete >> "$ABCDETEMPDIR/status"
2450 fi
2451 }
2452
2453 # do_cddbread
2454 do_cddbread ()
2455 {
2456 # If it's not to be used, generate a template.
2457 # Then, display it (or them) and let the user choose/edit it
2458 if checkstatus cddb-readcomplete; then :; else
2459 vecho "Obtaining CDDB results..."
2460 # If CDDB is to be used, interpret the query results and read all
2461 # the available entries.
2462 rm -f "$ABCDETEMPDIR/cddbchoices"
2463 CDDBCHOICES=1 # Overridden by multiple matches
2464 RESPONSECODE=$(head -n 1 "$ABCDETEMPDIR/cddbquery" | cut -f1 -d' ')
2465 case "$RESPONSECODE" in
2466 200)
2467 # One exact match, retrieve it
2468 # 200 [section] [discid] [artist] / [title]
2469 if checkstatus cddb-read-1-complete; then :; else
2470 echo -n "Retrieving 1 CDDB match..." >> "$ABCDETEMPDIR/cddbchoices"
2471 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $(cut -f2,3 -d' ' "$ABCDETEMPDIR/cddbquery") > "$ABCDETEMPDIR/cddbread.1"
2472 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2473 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2474 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2475 fi
2476 # List out disc title/author and contents
2477 echo ---- "$(cut '-d ' -f4- "$ABCDETEMPDIR/cddbquery")" ---- >> "$ABCDETEMPDIR/cddbchoices"
2478 for TRACK in $(f_seq_row 1 $TRACKS)
2479 do
2480 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2481 done
2482 echo >> "$ABCDETEMPDIR/cddbchoices"
2483 ;;
2484 202|403|409|503)
2485 # No match
2486 case "$RESPONSECODE" in
2487 202) echo "No CDDB match." >> "$ABCDETEMPDIR/cddbchoices" ;;
2488 403|409) echo "CDDB entry is corrupt, or the handshake failed." >> "$ABCDETEMPDIR/cddbchoices" ;;
2489 503) echo "CDDB unavailable." >> "$ABCDETEMPDIR/cddbchoices" ;;
2490 esac
2491 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2492 # List out disc title/author and contents of template
2493 echo ---- Unknown Artist / Unknown Album ---- >> "$ABCDETEMPDIR/cddbchoices"
2494 UNKNOWNDISK=y
2495 for TRACK in $(f_seq_row 1 $TRACKS)
2496 do
2497 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2498 done
2499 echo >> "$ABCDETEMPDIR/cddbchoices"
2500 echo cddb-read-0-complete >> "$ABCDETEMPDIR/status"
2501 echo cddb-choice=0 >> "$ABCDETEMPDIR/status"
2502 ;;
2503 210|211)
2504 # Multiple exact, (possibly multiple) inexact matches
2505 IN=
2506 if [ "$RESPONSECODE" = "211" ]; then IN=in; fi
2507 if [ "$(wc -l < "$ABCDETEMPDIR/cddbquery" | tr -d ' ')" -eq 3 ]; then
2508 echo "One ${IN}exact match:" >> "$ABCDETEMPDIR/cddbchoices"
2509 tail -n +2 "$ABCDETEMPDIR/cddbquery" | head -n 1 >> "$ABCDETEMPDIR/cddbchoices"
2510 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2511 else
2512 echo "Multiple ${IN}exact matches:" >> "$ABCDETEMPDIR/cddbchoices"
2513 fi
2514 vecho -n "Retrieving multiple matches... "
2515 grep -v ^[.]$ "$ABCDETEMPDIR/cddbquery" | ( X=0
2516 read DISCINFO # eat top line
2517 while read DISCINFO
2518 do
2519 X=$(expr $X + 1)
2520 if checkstatus cddb-read-$X-complete; then :; else
2521 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $(echo $DISCINFO | cut -f1,2 -d' ') > "$ABCDETEMPDIR/cddbread.$X"
2522 echo cddb-read-$X-complete >> "$ABCDETEMPDIR/status"
2523 fi
2524 # List out disc title/author and contents
2525 echo \#$X: ---- "$DISCINFO" ---- >> "$ABCDETEMPDIR/cddbchoices"
2526 for TRACK in $(f_seq_row 1 $TRACKS)
2527 do
2528 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2529 done
2530 echo >> "$ABCDETEMPDIR/cddbchoices"
2531 done )
2532 vecho "done."
2533 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2534 ;;
2535 999)
2536 # Using local copy.
2537 for TRACK in $(f_seq_row 1 $TRACKS)
2538 do
2539 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2540 done
2541 echo >> "$ABCDETEMPDIR/cddbchoices"
2542 echo cddb-read-1-complete >> "$ABCDETEMPDIR/status"
2543 echo cddb-choice=1 >> "$ABCDETEMPDIR/status"
2544 ;;
2545 esac
2546 echo "cddb-readcomplete" >> "$ABCDETEMPDIR/status"
2547 fi
2548 }
2549
2550 # do_cddbedit
2551 do_cddbedit ()
2552 {
2553 if checkstatus cddb-edit >/dev/null; then
2554 CDDBDATA="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2555 VARIOUSARTISTS="$(checkstatus variousartists)"
2556 VARIOUSARTISTSTYLE="$(checkstatus variousartiststyle)"
2557 return 0
2558 fi
2559 if [ "$INTERACTIVE" = "y" ]; then
2560 # We should show the CDDB results both when we are not using the local CDDB repo
2561 # or when we are using it but we could not find a proper match
2562 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
2563 # Display the $ABCDETEMPDIR/cddbchoices file created above
2564 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2565 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2566 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2567 CHOICE=$(checkstatus cddb-choice)
2568 if [ -n "$CHOICE" ] ; then
2569 case $CDDBCHOICES in
2570 -1) if head -1 "$ABCDETEMPDIR/cddbquery" | grep "^$" > /dev/null 2>&1 ; then
2571 log error "CDDB query failed!"
2572 exit 1
2573 else
2574 cat "$ABCDETEMPDIR/cddbchoices"
2575 fi
2576 ;;
2577 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2578 *)
2579 echo "Selected: #$CHOICE"
2580 do_cddbparse "$ABCDETEMPDIR/cddbread.$CHOICE"
2581 ;;
2582 esac
2583 else
2584 # The user has a choice to make, display the info in a pager if necessary
2585 if [ $(cat "$ABCDETEMPDIR/cddbchoices" | wc -l) -ge 24 ]; then
2586 page "$ABCDETEMPDIR/cddbchoices"
2587 else
2588 # It's all going to fit in one page, cat it
2589 cat "$ABCDETEMPDIR/cddbchoices" >&2
2590 fi
2591
2592 CDDBCHOICENUM=""
2593 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2594 CDCHOICENUM=-1
2595 # I'll take CDDB read #3 for $400, Alex
2596 while [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; do
2597 echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
2598 read CDDBCHOICE
2599 [ X"$CDDBCHOICE" = "X" ] && CDDBCHOICE=1
2600 if echo $CDDBCHOICE | grep -E "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2601 if [ ! X"$DIFF" = "X" ]; then
2602 PARSECHOICE1=$(echo $CDDBCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
2603 PARSECHOICE2=$(echo $CDDBCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
2604 if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
2605 [ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
2606 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
2607 echo "Invalid diff range. Please select two comma-separated numbers between 1 and $CDDBCHOICES" >&2
2608 else
2609 # We parse the 2 choices to diff, store them in temporary files and diff them.
2610 for PARSECHOICE in $(echo $CDDBCHOICE | tr , \ ); do
2611 do_cddbparse "$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
2612 done
2613 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/cddbread.diff"
2614 $DIFF $DIFFOPTS "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/cddbread.diff"
2615 if [ $(cat "$ABCDETEMPDIR/cddbread.diff" | wc -l) -ge 24 ]; then
2616 page "$ABCDETEMPDIR/cddbread.diff"
2617 else
2618 cat "$ABCDETEMPDIR/cddbread.diff" >&2
2619 fi
2620 fi
2621 else
2622 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
2623 fi
2624 elif echo $CDDBCHOICE | grep -E "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev/null 2>&1 ; then
2625 # Make sure we get a valid choice
2626 CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
2627 if [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; then
2628 echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
2629 fi
2630 fi
2631 done
2632 if [ "$CDCHOICENUM" = "0" ]; then
2633 vecho "Creating empty CDDB template..."
2634 UNKNOWNDISK=y
2635 $CDDBTOOL template $(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2636 else
2637 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2638 do_cddbparse "$ABCDETEMPDIR/cddbread.$CDCHOICENUM"
2639 fi
2640 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2641 fi
2642 fi
2643 else
2644 # We need some code to show the selected option when local repository is selected and we have found a match
2645 vecho "Using cached CDDB match..." >&2
2646 # Display the $ABCDETEMPDIR/cddbchoices file created above
2647 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2648 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2649 CDDBCHOICES=$(expr $(cat "$ABCDETEMPDIR/cddbquery" | wc -l) - 2)
2650 CHOICE=$(checkstatus cddb-choice)
2651 if [ "$USELOCALRESP" = "y" ]; then :; else
2652 if [ -n "$CHOICE" ] ; then
2653 case $CDDBCHOICES in
2654 0)
2655 UNKNOWNDISK=y
2656 echo "Selected template."
2657 ;;
2658 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2659 *)
2660 echo "Selected: #$CHOICE"
2661 do_cddbparse "$ABCDETEMPDIR/cddbread.$CHOICE"
2662 ;;
2663 esac
2664 fi
2665 fi
2666 fi
2667 fi
2668 else
2669 # We're noninteractive - pick the first choice.
2670 # But in case we run a previous instance and selected a choice, use it.
2671 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2672 # Show the choice if we are not using the locally stored one
2673 # or when the local search failed to find a match.
2674 PREVIOUSCHOICE=$(checkstatus cddb-choice)
2675 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] || [ ! "$CDDBUSELOCAL" = "y" ]; then
2676 #if [ "$PREVIOUSCHOICE" ]; then
2677 cat "$ABCDETEMPDIR/cddbchoices"
2678 #fi
2679 fi
2680 if [ ! -z "$PREVIOUSCHOICE" ] ; then
2681 CDCHOICENUM=$PREVIOUSCHOICE
2682 else
2683 CDCHOICENUM=1
2684 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2685 fi
2686 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2687 fi
2688 fi
2689
2690 # sanity check
2691 if checkstatus cddb-choice >/dev/null; then :; else
2692 echo "abcde: internal error: cddb-choice not recorded." >&2
2693 exit 1
2694 fi
2695 CDDBDATA="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2696 echo -n "Edit selected CDDB data? [y/n] (" >&2
2697 if [ "$INTERACTIVE" = "y" ]; then
2698 if [ "$UNKNOWNDISK" = "y" ]; then
2699 echo -n "y): " >&2
2700 read EDITCDDB
2701 [ "$EDITCDDB" != "n" ] && EDITCDDB=y
2702 else
2703 echo -n "n): " >&2
2704 read EDITCDDB
2705 fi
2706 else
2707 echo "n): n" >&2
2708 EDITCDDB=n
2709 fi
2710 if [ "$EDITCDDB" = "y" ]; then
2711 CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
2712
2713 # Use the debian sensible-editor wrapper to pick the editor that the
2714 # user has requested via their $EDITOR environment variable
2715 if [ -x "/usr/bin/sensible-editor" ]; then
2716 /usr/bin/sensible-editor "$CDDBDATA"
2717 elif [ -n "$EDITOR" ]; then
2718 if [ -x $(which "${EDITOR%%\ *}") ]; then
2719 # That failed, try to load the preferred editor, starting
2720 # with their EDITOR variable
2721 eval $(echo "$EDITOR") \"$CDDBDATA\"
2722 fi
2723 # If that fails, check for a vi
2724 elif which vi >/dev/null 2>&1; then
2725 vi "$CDDBDATA"
2726 elif [ -x /usr/bin/vim ]; then
2727 /usr/bin/vim "$CDDBDATA"
2728 elif [ -x /usr/bin/vi ]; then
2729 /usr/bin/vi "$CDDBDATA"
2730 elif [ -x /bin/vi ]; then
2731 /bin/vi "$CDDBDATA"
2732 # nano should be on all (modern, i.e., sarge) debian systems
2733 elif which nano >/dev/null 2>&1 ; then
2734 nano "$CDDBDATA"
2735 elif [ -x /usr/bin/nano ]; then
2736 /usr/bin/nano "$CDDBDATA"
2737 # mg should be on all OpenBSD systems
2738 elif which mg >/dev/null 2>&1 ; then
2739 mg "$CDDBDATA"
2740 elif [ -x /usr/bin/mg ]; then
2741 /usr/bin/mg "$CDDBDATA"
2742 # bomb out
2743 else
2744 log warning "no editor available. Check your EDITOR environment variable."
2745 fi
2746 # delete editor backup file if it exists
2747 if [ -w "$CDDBDATA~" ]; then
2748 rm -f "$CDDBDATA~"
2749 fi
2750 fi
2751
2752 # Some heuristics first. Look at Disc Title, and if it starts with
2753 # "Various", then we'll assume Various Artists
2754 if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | grep -Eci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
2755 echo "Looks like a Multi-Artist CD" >&2
2756 VARIOUSARTISTS=y
2757 else
2758 echo -n "Is the CD multi-artist [y/N]? " >&2
2759 if [ "$INTERACTIVE" = "y" ]; then
2760 read VARIOUSARTISTS
2761 else
2762 echo n >&2
2763 VARIOUSARTISTS=n
2764 fi
2765 fi
2766 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
2767 # Set a default
2768 DEFAULTSTYLE=1
2769 # Need NUMTRACKS before cddb-tool will return it:
2770 NUMTRACKS=$(grep -E '^TTITLE[0-9]+=' "$CDDBDATA" | wc -l)
2771 if [ "$(grep -c "^TTITLE.*\/" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2772 # More than 1/2 tracks contain a "/", so guess forward
2773 DEFAULTSTYLE=1
2774 elif [ "$(grep -c "^TTITLE.*\-" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2775 # More than 1/2 contain a "-", so guess forward-dash
2776 DEFAULTSTYLE=2
2777 elif [ "$(grep -c "^TTITLE.*(.*)" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2778 # More than 1/2 contain something in parens, so guess trailing-paren
2779 DEFAULTSTYLE=6
2780 fi
2781
2782 echo "1) Artist / Title" >&2
2783 echo "2) Artist - Title" >&2
2784 echo "3) Title / Artist" >&2
2785 echo "4) Title - Artist" >&2
2786 echo "5) Artist: Title" >&2
2787 echo "6) Title (Artist)" >&2
2788 echo "7) This is a single-artist CD" >&2
2789 echo -n "Which style of multiple artist entries is it? [1-7] ($DEFAULTSTYLE): " >&2
2790 if [ "$INTERACTIVE" = "y" ]; then
2791 read VARIOUSARTISTSTYLE
2792 else
2793 echo $DEFAULTSTYLE >&2
2794 VARIOUSARTISTSTYLE=$DEFAULTSTYLE
2795 fi
2796 VARIOUSARTISTSTYLE=$(echo 0$VARIOUSARTISTSTYLE | xargs printf %d)
2797 # If they press Enter, then the default style (0) was chosen
2798 while [ $VARIOUSARTISTSTYLE -lt 0 ] || [ $VARIOUSARTISTSTYLE -gt 7 ]; do
2799 echo "Invalid selection. Please choose a number between 1 and 7."
2800 echo -n "Selection [1-7]: "
2801 read VARIOUSARTISTSTYLE
2802 VARIOUSARTISTSTYLE=$(echo 0$VARIOUSARTISTSTYLE | xargs printf %d)
2803 done
2804 if [ "$VARIOUSARTISTSTYLE" = "0" ]; then
2805 VARIOUSARTISTSTYLE=$DEFAULTSTYLE
2806 fi
2807 vecho "Selected: $VARIOUSARTISTSTYLE"
2808 case "$VARIOUSARTISTSTYLE" in
2809 1) # Artist / Title
2810 VARIOUSARTISTSTYLE=forward
2811 ;;
2812 2) # Artist - Title
2813 VARIOUSARTISTSTYLE=forward-dash
2814 ;;
2815 3) # Title / Artist
2816 VARIOUSARTISTSTYLE=reverse
2817 ;;
2818 4) # Title - Artist
2819 VARIOUSARTISTSTYLE=reverse-dash
2820 ;;
2821 5) # Artist: Title
2822 VARIOUSARTISTSTYLE=colon
2823 ;;
2824 6) # Title (Artist)
2825 VARIOUSARTISTSTYLE=trailing-paren
2826 ;;
2827 7) # Single Artist
2828 VARIOUSARTISTS=n
2829 ;;
2830 esac
2831 fi
2832
2833 echo "variousartists=$VARIOUSARTISTS" >> "$ABCDETEMPDIR/status"
2834 echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
2835
2836 if [ "$EDITCDDB" = "y" ] && [ "$CDDBMETHOD" = "cddb" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
2837 if [ "$CDDBDATAMD5SUM" != "" ] && [ "$CDDBDATAMD5SUM" != "$($MD5SUM "$CDDBDATA" | cut -d " " -f 1)" ]; then
2838 # This works but does not have the necessary error checking
2839 # yet. If you are familiar with the CDDB spec
2840 # (see http://www.freedb.org/src/latest/DBFORMAT)
2841 # and can create an error-free entry on your own, then put
2842 # UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE=y in your
2843 # abcde.conf to enable it. Put CDDBSUBMIT=email@address in
2844 # your abcde.conf to change the email address submissions are
2845 # sent to.
2846
2847 # submit the modified file, if they want
2848 if [ "$NOSUBMIT" != "y" ]; then
2849 echo -n "Do you want to submit this entry to $CDDBSUBMIT [y/N]? "
2850 read YESNO
2851 while [ "$YESNO" != "y" ] && [ "$YESNO" != "n" ] && [ "$YESNO" != "Y" ] && \
2852 [ "$YESNO" != "N" ] && [ "$YESNO" != "" ]
2853 do
2854 echo -n 'Invalid selection. Please answer "y" or "n": '
2855 read YESNO
2856 done
2857 if [ "$YESNO" = "y" ] || [ "$YESNO" = "Y" ]; then
2858 echo -n "Sending..."
2859 $CDDBTOOL send "$CDDBDATA" $CDDBSUBMIT
2860 echo "done."
2861 fi
2862 fi
2863 fi
2864 fi
2865 ### FIXME ###
2866 # User CDDBLOCALPOLICY to find out if we store the file or not...
2867 # Cache edited CDDB entry in the user's cddb dir
2868 if [ "$CDDBCOPYLOCAL" = "y" ]; then
2869 # Make sure the cache directory exists
2870 mkdir -p $CDDBLOCALDIR
2871 cat "$CDDBDATA" | tail -n $(expr $(cat "$CDDBDATA" | wc -l ) - 1 ) > ${CDDBLOCALDIR}/$(echo "$TRACKINFO" | cut -d' ' -f1)
2872 fi
2873
2874 echo "cddb-edit" >> "$ABCDETEMPDIR/status"
2875 }
2876
2877 # do_cdread [tracknumber]
2878 # do_cdread onetrack [firsttrack] [lasttrack]
2879 #
2880 do_cdread ()
2881 {
2882 # The commands here don't go through run_command because they're never supposed to be silenced
2883 # return codes need to be doublechecked anyway, however
2884 if [ "$1" = "onetrack" ]; then
2885 # FIXME # Add the possibility of grabbing ranges of tracks in onetrack
2886 # FIXME # Until then, we grab the whole CD in one track, no matter what
2887 # the user said
2888 # We need the first and last track for cdda2wav/icedax
2889 FIRSTTRACK=$2
2890 LASTTRACK=$(expr $3 + 0)
2891 UTRACKNUM=$FIRSTTRACK
2892 case "$CDROMREADERSYNTAX" in
2893 flac) READTRACKNUMS="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
2894 cdparanoia)
2895 #XX FIXME XX
2896 # Add a variable to check if tracks are provided in command line and if not, use "0-" to rip the tracks
2897 READTRACKNUMS="$FIRSTTRACK-$LASTTRACK" ;;
2898 cdda2wav | icedax) READTRACKNUMS="$FIRSTTRACK+$LASTTRACK" ;;
2899 *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
2900 exit 1 ;;
2901 esac
2902 else
2903 UTRACKNUM=$1
2904 fi
2905 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
2906 if [ "$USEPIPES" = "y" ]; then
2907 TEMPARG="PIPERIPPER_$CDROMREADERSYNTAX"
2908 FILEARG="$( eval echo "\$$TEMPARG" )"
2909 REDIR="y"
2910 PIPE_MESSAGE="and encoding "
2911 else
2912 WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
2913 case "$CDROMREADERSYNTAX" in
2914 ## FIXME ## Find the cases for dagrab and flac, to avoid exceptions
2915 flac)
2916 FILEARG="--output-name=$WAVDATA"
2917 ;;
2918 dagrab)
2919 FILEARG="-f $WAVDATA"
2920 ;;
2921 *)
2922 FILEARG="$WAVDATA"
2923 ;;
2924 esac
2925 REDIR="n"
2926 fi
2927 if [ "$1" = "onetrack" ]; then
2928 echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
2929 else
2930 if [ -r "$CDDBDATA" ]; then
2931 getcddbinfo TRACKNAME
2932 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
2933 else
2934 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM..." >&2
2935 fi
2936 fi
2937 case "$CDROMREADERSYNTAX" in
2938 ### FIXME ### use an exception for flac, since it uses -o
2939 ### FIXME ### Shall we just use -o $FILEARG ??
2940 flac)
2941 # Avoid problems wit math expressions by unpadding the given UTRACKNUM
2942 STRIPTRACKNUM=$(expr $UTRACKNUM + 0)
2943 nice $READNICE $FLAC -d -f --cue=${READTRACKNUMS:-$STRIPTRACKNUM.1-$(($STRIPTRACKNUM + 1)).0} "$FILEARG" "$CDROM" ;;
2944 cdparanoia)
2945 if [ "$REDIR" = "y" ]; then
2946 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
2947 else
2948 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
2949 fi;;
2950
2951 cdda2wav | icedax)
2952 if [ "$OSFLAVOUR" = "OSX" ] ; then
2953 # Hei, we have to unmount the device before running anything like cdda2wav/icedax in OSX
2954 diskutil unmount ${CDROM#/dev/}
2955 # Also, in OSX the cdrom device for cdda2wav/icedax changes...
2956 CDDA2WAVCDROM="IODVDServices"
2957 elif [ "$OSFLAVOUR" = "FBSD" ] ; then
2958 CDDA2WAVCDROM="$CDROMID"
2959 else
2960 if [ "$CDROMID" = "" ]; then
2961 CDDA2WAVCDROM="$CDROM"
2962 else
2963 CDDA2WAVCDROM="$CDROMID"
2964 fi
2965 fi
2966 if [ "$REDIR" = "y" ]; then
2967 nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" >&2
2968 else
2969 nice $READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG"
2970 fi ;;
2971 ## FIXME ## We have an exception for dagrab, since it uses -f
2972 ## FIXME ## Shall we just use -f $FILEARG ??
2973 dagrab)
2974 if [ "$REDIR" = "y" ]; then
2975 nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG" >&2
2976 else
2977 nice $READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG"
2978 fi ;;
2979 cddafs)
2980 # Find the track's mounted path
2981 REALTRACKNUM=$(expr $UTRACKNUM + 0)
2982 FILEPATH=$(mount | grep "$CDROM on" | sed 's/^[^ ]* on \(.*\) (.*/\1/')
2983 FILEPATH=$(find "$FILEPATH" | grep "/$REALTRACKNUM ");
2984 # If the file exists, copy it
2985 if [ -e "$FILEPATH" ] ; then
2986 if [ "$REDIR" = "y" ]; then
2987 nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG" >&2
2988 else
2989 nice $READNICE $CDROMREADER "$FILEPATH" "$FILEARG"
2990 fi
2991 else
2992 false
2993 fi ;;
2994 debug)
2995 if [ "$REDIR" = "y" ]; then
2996 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG" >&2
2997 else
2998 nice $READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG"
2999 fi ;;
3000 esac
3001 RETURN=$?
3002 # If we get some error or we get some missing wav
3003 # (as long as we dont use pipes)
3004 if [ "$RETURN" != "0" -o \( ! -s "$WAVDATA" -a X"$USEPIPES" != "Xy" \) ]; then
3005 # Thank goodness errors is only machine-parseable up to the
3006 # first colon, otherwise this woulda sucked
3007 if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
3008 RETURN=73 # fake a return code as cdparanoia return 0 also on aborted reads
3009 fi
3010 if [ "$USEPIPES" = "y" ]; then
3011 echo "readencodetrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
3012 else
3013 echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
3014 fi
3015 return $RETURN
3016 else
3017 if [ "$USEPIPES" = "y" ]; then
3018 echo readencodetrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
3019 else
3020 echo readtrack-$UTRACKNUM >> "$ABCDETEMPDIR/status"
3021 fi
3022 if [ "$1" = "onetrack" ]; then
3023 echo onetrack >> "$ABCDETEMPDIR/status"
3024 fi
3025 fi
3026 }
3027
3028 # do_cdspeed
3029 # No values accepted, only uses env variables
3030 do_cdspeed ()
3031 {
3032 if "$CDSPEED" "$CDSPEEDOPTS" "$CDSPEEDVALUE" >/dev/null ; then
3033 vecho "Setting CD speed to ${CDSPEEDVALUE}x"
3034 else
3035 echo "abcde: unable to set the device speed" >&2
3036 fi
3037 }
3038
3039 # vecho [message]
3040 #
3041 # vecho outputs a message if EXTRAVERBOSE is 1 or more
3042 vecho ()
3043 {
3044 if [ x"$EXTRAVERBOSE" != "x" ] && [ $EXTRAVERBOSE -gt 0 ] ; then
3045 case $1 in
3046 warning) shift ; log warning "$@" ;;
3047 *) echo "$@" ;;
3048 esac
3049 fi
3050 }
3051
3052 # vvecho [message]
3053 #
3054 # vvecho outputs a message if EXTRAVERBOSE is 2 or more
3055 vvecho ()
3056 {
3057 if [ x"$EXTRAVERBOSE" != "x" ] && [ $EXTRAVERBOSE -gt 1 ] ; then
3058 case $1 in
3059 warning) shift ; log warning "$@" ;;
3060 *) echo "$@" ;;
3061 esac
3062 fi
3063 }
3064
3065 # decho [message]
3066 #
3067 # decho outputs a debug message if DEBUG is selected
3068 decho ()
3069 {
3070 if [ x"$DEBUG" != "x" ]; then
3071 if echo $1 | grep "^\[" > /dev/null 2>&1 ; then
3072 DEBUGECHO=$(echo "$@" | tr -d '[]')
3073 echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
3074 else
3075 echo "[DEBUG] $1"
3076 fi
3077 fi
3078 }
3079
3080 # User-redefinable functions
3081 # Custom filename munging:
3082 mungefilename ()
3083 {
3084 #echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
3085 echo "$@" | sed s,:,\ -,g | tr \ / __ | tr -d \'\"\?\[:cntrl:\]
3086 }
3087
3088 # Custom genre munging:
3089 mungegenre ()
3090 {
3091 echo $CDGENRE | tr "[:upper:]" "[:lower:]"
3092 }
3093
3094 # pre_read
3095 # Empty pre_read function, to be defined in the configuration file.
3096 pre_read ()
3097 {
3098 :
3099 }
3100
3101 # post_read
3102 # Empty post_read function, to be defined in the configuration file.
3103 post_read ()
3104 {
3105 :
3106 }
3107
3108 # post_encode
3109 # Empty post_encode function, to be defined in the configuration file.
3110 post_encode ()
3111 {
3112 :
3113 }
3114
3115 ###############################################################################
3116 # End of functions
3117 #
3118 # Start of execution
3119 ###############################################################################
3120
3121 # Builtin defaults
3122
3123 # CDDB
3124 # Defaults to FreeDB, but musicbrainz can be used too, via the abcde-musicbrainz-tool script
3125 CDDBMETHOD=cddb
3126 CDDBURL="http://freedb.freedb.org/~cddb/cddb.cgi"
3127 CDDBSUBMIT=freedb-submit@freedb.org
3128 CDDBPROTO=6
3129 HELLOINFO="$(whoami)@$(hostname)"
3130 CDDBCOPYLOCAL="n"
3131 CDDBLOCALPOLICY="always"
3132 CDDBLOCALRECURSIVE="y"
3133 CDDBLOCALDIR="$HOME/.cddb"
3134 CDDBUSELOCAL="n"
3135
3136 # List of fields we parse and show during the CDDB parsing...
3137 SHOWCDDBFIELDS="year,genre"
3138
3139 INTERACTIVE=y
3140 #CDROMREADERSYNTAX=cdparanoia
3141 ENCODERSYNTAX=default
3142
3143 MP3ENCODERSYNTAX=default
3144 OGGENCODERSYNTAX=default
3145 FLACENCODERSYNTAX=default
3146 SPEEXENCODERSYNTAX=default
3147 MPPENCODERSYNTAX=default
3148 AACENCODERSYNTAX=default
3149 NORMALIZERSYNTAX=default
3150 CUEREADERSYNTAX=default
3151
3152 OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
3153 # Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
3154 #VAOUTPUTFORMAT=${OUTPUTFORMAT}
3155 VAOUTPUTFORMAT='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
3156 ONETRACKOUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
3157 VAONETRACKOUTPUTFORMAT='Various-${ALBUMFILE}/${ALBUMFILE}'
3158 PLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
3159 PLAYLISTDATAPREFIX=''
3160 VAPLAYLISTFORMAT='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
3161 VAPLAYLISTDATAPREFIX=''
3162 DOSPLAYLIST=n
3163 COMMENT=''
3164 ID3TAGV=2
3165 ENCNICE=10
3166 READNICE=10
3167 DISTMP3NICE=10
3168 VARIOUSARTISTS=n
3169 VARIOUSARTISTSTYLE=forward
3170 KEEPWAVS=n
3171 PADTRACKS=n
3172 NOGAP=n
3173 BATCHNORM=n
3174 NOCDDBQUERY=n
3175
3176 # If using scsi devices, cdda2wav/icedax needs a CDROMID, instead of a device node
3177 # i.e. CDROMID="1,0,0"
3178 CDROMID=""
3179 # If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
3180 # If we are using the ide-scsi emulation layer, we need to define a "g"
3181 CDPARANOIACDROMBUS="d"
3182
3183 # program paths - defaults to checking your $PATH
3184 # mp3
3185 LAME=lame
3186 TOOLAME=toolame
3187 GOGO=gogo
3188 BLADEENC=bladeenc
3189 L3ENC=l3enc
3190 XINGMP3ENC=xingmp3enc
3191 MP3ENC=mp3enc
3192 # ogg
3193 VORBIZE=vorbize
3194 OGGENC=oggenc
3195 # flac
3196 FLAC=flac
3197 # speex
3198 SPEEXENC=speexenc
3199 # mpp (Musepack)
3200 MPPENC=mppenc
3201 # m4a
3202 AACENC=faac
3203
3204 ID3=id3
3205 ID3V2=id3v2
3206 EYED3=eyeD3
3207 VORBISCOMMENT=vorbiscomment
3208 METAFLAC=metaflac
3209 AACTAG=faac
3210 ATOMICPARSLEY=AtomicParsley
3211
3212 CDPARANOIA=cdparanoia
3213 CDDA2WAV=icedax
3214 DAGRAB=dagrab
3215 CDDAFS=cp
3216 CDDISCID=cd-discid
3217 CDDBTOOL=cddb-tool
3218 MUSICBRAINZ=abcde-musicbrainz-tool
3219 EJECT=eject
3220 MD5SUM=md5sum
3221 DISTMP3=distmp3
3222 NORMALIZE=normalize-audio
3223 CDSPEED=eject
3224 VORBISGAIN=vorbisgain
3225 MP3GAIN=mp3gain
3226 MPPGAIN=replaygain
3227 MKCUE=mkcue
3228 MKTOC=cdrdao
3229 DIFF=diff
3230 CUE2DISCID=builtin
3231
3232 # Options for programs called from abcde
3233 # mp3
3234 LAMEOPTS=
3235 TOOLAMEOPTS=
3236 GOGOOPTS=
3237 BLADEENCOPTS=
3238 L3ENCOPTS=
3239 XINGMP3ENCOPTS=
3240 MP3ENCOPTS=
3241 MP3GAINOPTS="-a -k"
3242 # ogg
3243 VORBIZEOPTS=
3244 OGGENCOPTS=
3245 VORBISGAINOPTS="--album"
3246 # flac
3247 FLACOPTS=
3248 FLACGAINOPTS="--add-replay-gain"
3249 # speex
3250 SPEEXENCOPTS=
3251 # mpc
3252 MPPENCOPTS=
3253 # m4a
3254 AACENCOPTS=
3255
3256 ID3OPTS=
3257 ID3V2OPTS=
3258 CDPARANOIAOPTS=
3259 CDDA2WAVOPTS=
3260 DAGRABOPTS=
3261 CDDAFSOPTS="-f"
3262 CDDBTOOLOPTS=
3263 EJECTOPTS=
3264 DISTMP3OPTS=
3265 NORMALIZEOPTS=
3266 CDSPEEDOPTS="-x"
3267 CDSPEEDVALUE=
3268 MKCUEOPTS=
3269 MKTOCOPTS=""
3270 VORBISCOMMENTOPTS="-R"
3271 METAFLACOPTS="--no-utf8-convert"
3272 DIFFOPTS=
3273
3274 # Default to one process if -j isn't specified
3275 MAXPROCS=1
3276
3277 # List of actions to perform - by default, run to completion
3278 ACTIONS=cddb,read,encode,tag,move,clean
3279
3280 # This option is basically for Debian package dependencies:
3281 # List of preferred outputs - by default, run with whatever we have in the path
3282 DEFAULT_OUTPUT_BINARIES=vorbis:oggenc,flac:flac,mp3:toolame,mp3:lame,mp3:bladeenc,spx:speex,m4a:faac
3283
3284 # List of preferred cdromreaders - by default, run whichever we have in the path
3285 DEFAULT_CDROMREADERS="cdparanoia icedax cdda2wav"
3286
3287 # List of quality levels associated with the encoders:
3288 DEFAULT_QUALITY_XLO="oggenc:-q -1,lame:-q 9,speex:--quality 1,m4a:"
3289 DEFAULT_QUALITY_LO="oggenc:-q 1,lame:-q 7,speex:--quality 5,m4a:"
3290 DEFAULT_QUALITY_HI="oggenc:-q 7,lame:--preset standard,speex:--quality 9,m4a:"
3291 DEFAULT_QUALITY_XHI="oggenc:-q 10,lame:--preset extreme,speex:--quality 10,m4a:"
3292
3293 # Assume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for
3294 # Linux/OpenBSD. ftp is user for NetBSD.
3295 # Let's use these checkings to determine the OS flavour, which will be used
3296 # later
3297 if [ X$(uname) = "XFreeBSD" ] ; then
3298 HTTPGET=fetch
3299 MD5SUM=md5
3300 NEEDCDROMID=y
3301 OSFLAVOUR=FBSD
3302 elif [ X$(uname) = "XDarwin" ] ; then
3303 HTTPGET=curl
3304 OSFLAVOUR=OSX
3305 # We should have diskutil in OSX, but let's be sure...
3306 NEEDDISKUTIL=y
3307 CDROMREADERSYNTAX=cddafs
3308 elif [ X$(uname) = "XOpenBSD" ] ; then
3309 HTTPGET=wget
3310 MD5SUM=md5
3311 OSFLAVOUR=OBSD
3312 elif [ X$(uname) = "XNetBSD" ] ; then
3313 HTTPGET=ftp
3314 MD5SUM=md5
3315 OSFLAVOUR=NBSD
3316 elif [ X$(uname) = "SunOS" ] ; then
3317 HTTPGET=""
3318 MD5SUM=md5
3319 OSFLAVOUR=SunOS
3320 else
3321 HTTPGET=wget
3322 fi
3323
3324 # If CDDBAVAIL is set to n, no CDDB read is done
3325 # If USEID3 is set to n, no ID3 tagging is done
3326 CDDBAVAIL=y
3327 USEID3=y
3328 USEID3V2=y
3329
3330 # There we go..
3331 # But before we get into business, let us chop off any GREP environmental
3332 # variables.
3333 GREP_OPTIONS=""
3334 GREP_COLOR=""
3335
3336 if [ -z "$OUTPUTDIR" ]; then
3337 OUTPUTDIR=$(pwd)
3338 fi
3339
3340 if [ -z "$WAVOUTPUTDIR" ]; then
3341 WAVOUTPUTDIR="$OUTPUTDIR"
3342 fi
3343
3344 # Load system defaults
3345 if [ -r /etc/abcde.conf ]; then
3346 . /etc/abcde.conf
3347 fi
3348 # Load user preference defaults
3349 if [ -r $HOME/.abcde.conf ]; then
3350 . $HOME/.abcde.conf
3351 fi
3352
3353 # By this time, we need some HTTPGETOPTS already defined.
3354 # If the user has defined a non-default HTTPGET method, we should not be empty.
3355
3356 if [ "$HTTPGETOPTS" = "" ] ; then
3357 case $HTTPGET in
3358 wget) HTTPGETOPTS="-q -nv -e timestamping=off -O -";;
3359 curl) HTTPGETOPTS="-f -s";;
3360 fetch)HTTPGETOPTS="-q -o -";;
3361 ftp) HTTPGETOPTS="-a -V -o - ";;
3362 *) log warning "HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
3363 esac
3364 fi
3365
3366 # If the CDROM has not been set yet, find a suitable one.
3367 # If this is a devfs system, default to /dev/cdroms/cdrom0
3368 # instead of /dev/cdrom
3369 if [ "$CDROM" = "" ] ; then
3370 if [ -e /dev/cdroms/cdrom0 ]; then
3371 CDROM=/dev/cdroms/cdrom0
3372 elif [ -e /dev/cdrom ]; then
3373 CDROM=/dev/cdrom
3374 elif [ -e /dev/sr0 ]; then
3375 CDROM=/dev/sr0
3376 elif [ -e /dev/cd0c ]; then
3377 CDROM=/dev/cd0c
3378 elif [ -e /dev/acd0c ]; then
3379 CDROM=/dev/acd0c
3380 elif [ -e /dev/disk1 ]; then
3381 CDROM=/dev/disk1
3382 elif [ "$OSFLAVOUR" = "OSX" ] && [[ $(diskutil list) =~ CD_part.*(disk.)$'\n' ]]; then
3383 CDROM=/dev/${BASH_REMATCH[1]}
3384 fi
3385 fi
3386
3387 # We used to use EXTRAVERBOSE=y to turn on more debug output. Now
3388 # that's changed to a number to allow for more control. If
3389 # EXTRAVERBOSE=y, set it to 1 for backwards compatibility.
3390 if [ "$EXTRAVERBOSE" = "y" ]; then
3391 EXTRAVERBOSE=1
3392 fi
3393 if [ "$EXTRAVERBOSE" = "n" ]; then
3394 EXTRAVERBOSE=0
3395 fi
3396
3397 # Parse command line options
3398 #while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPq:r:Rs:S:t:T:vVxw:W: opt ; do
3399 while getopts 1a:bBc:C:d:Defghj:klLmMnNo:pPq:r:s:S:t:T:UvVxX:w:W:z opt ; do
3400 case "$opt" in
3401 1) ONETRACK=y ;;
3402 a) ACTIONS="$OPTARG" ;;
3403 A) EXPACTIONS="$OPTARG" ;;
3404 b) BATCHNORM=y ;;
3405 B) NOBATCHREPLAYGAIN=y ;;
3406 c) if [ -e "$OPTARG" ] ; then . "$OPTARG" ; else log error "config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
3407 C) DISCID="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
3408 d) CDROM="$OPTARG" ;;
3409 D) set -x ;;
3410 h) usage; exit ;;
3411 e) ERASEENCODEDSTATUS=y ;;
3412 E) ENCODING="$OPTARG" ;;
3413 f) FORCE=y ;;
3414 g) NOGAP=y ;;
3415 i) INLINETAG=y ;;
3416 j) MAXPROCS="$OPTARG" ;;
3417 k) KEEPWAVS=y ;;
3418 l) LOWDISK=y ;;
3419 L) CDDBUSELOCAL=y ;;
3420 n) CDDBAVAIL=n ;;
3421 N) INTERACTIVE=n ;;
3422 m) DOSPLAYLIST=y ;;
3423 M) DOCUE=y ;;
3424 o) OUTPUTTYPE="$OPTARG" ;;
3425 p) PADTRACKS=y ;;
3426 P) USEPIPES=y ;;
3427 q) QUALITYLEVEL="$OPTARG" ;;
3428 r) REMOTEHOSTS="$OPTARG" ;;
3429 R) CDDBLOCALRECURSIVE=y ;;
3430 s) SHOWCDDBFIELDS="$OPTARG" ;;
3431 S) CDSPEEDVALUE="$OPTARG" ;;
3432 t) STARTTRACKNUMBER="$OPTARG" ;;
3433 T) STARTTRACKNUMBER="$OPTARG" ; STARTTRACKNUMBERTAG="y" ;;
3434 U) CDDBPROTO=5 ;;
3435 v)
3436 echo "This is abcde v$VERSION."
3437 echo "Usage: abcde [options] [tracks]"
3438 echo "abcde -h for extra help"
3439 exit
3440 ;;
3441 V) EXTRAVERBOSE=$(($EXTRAVERBOSE + 1)) ;;
3442 x) EJECTCD="y" ;;
3443 X) CUE2DISCID="$OPTARG" ;;
3444 w) COMMENT="$OPTARG" ;;
3445 W) if echo $OPTARG | grep "[[:digit:]]" > /dev/null 2>&1 ; then
3446 STARTTRACKNUMBER="${OPTARG}01"
3447 STARTTRACKNUMBERTAG="y"
3448 COMMENT="CD${OPTARG}"
3449 DISCNUMBER="${OPTARG}"
3450 else
3451 log error "argument of -W must be integer"
3452 exit 1
3453 fi
3454 ;;
3455 z) DEBUG=y ; CDROMREADERSYNTAX=debug ; EJECTCD="n" ;;
3456 ?) usage; exit ;;
3457 esac
3458 done
3459
3460 shift $(($OPTIND - 1))
3461
3462 # Here it comes the worse part of the whole thing. From here until we start
3463 # ripping, we have a mixture of sanity checks, verifications, default settigs
3464 # and other crazy stuff that interdepends, but hey, someone has to do it.
3465
3466 # If NOCDDBQUERY is set, don't query the CDDB server.
3467 if [ "$NOCDDBQUERY" = "y" ]; then
3468 CDDBAVAIL="n"
3469 fi
3470
3471 # If the user specified a flac file, then switch to special flac mode
3472 if echo "$CDROM" | grep -i '.flac$' > /dev/null 2>&1 ; then
3473 if [ ! -f "$CDROM" ]; then
3474 log error "the defined file for FLAC ripping cannot be found" >&2
3475 exit 1
3476 fi
3477 vecho warning "switching to flac CDROMREADERSYNTAX..."
3478 CDROMREADERSYNTAX=flac
3479 # We have a builtin version of cue2discid...
3480 case "$CUE2DISCID" in
3481 builtin);;
3482 *) NEEDCUE2DISCID=y;;
3483 esac
3484 NEEDMETAFLAC=y
3485 EJECTCD=n
3486 fi
3487
3488 # If the user provided a DISCID, disable eject
3489 if [ -n "$DISCID" ] || [ "$CDROMREADERSYNTAX" = "flac" ]; then EJECTCD=n ; fi
3490
3491 # Check the available cd rippers in the system, from the ones we know.
3492 if [ "$CDROMREADERSYNTAX" = "" ]; then
3493 for DEFAULT_CDROMREADER in $DEFAULT_CDROMREADERS; do
3494 if new_checkexec $DEFAULT_CDROMREADER; then
3495 CDROMREADERSYNTAX=$DEFAULT_CDROMREADER
3496 break
3497 fi
3498 done
3499 if [ "$CDROMREADERSYNTAX" = "" ]; then
3500 log error "no cdreader found in your PATH"
3501 log error "hints: are all dependencies installed? has the \$PATH been modified?"
3502 exit 1
3503 fi
3504 fi
3505
3506 # Decide if we can continue.
3507 if [ "$ONETRACK" = "y" ]; then
3508 # FIXME # remove check as soon as we find out about the other readers
3509 case "$CDROMREADERSYNTAX" in
3510 flac) ;;
3511 cdparanoia) ;;
3512 cdda2wav | icedax) ;;
3513 *) log error "$CDROMREADERSYNTAX does not support ONETRACK mode"
3514 exit 1 ;;
3515 esac
3516 if [ "$BATCHNORM" = "y" ]; then
3517 log warning "BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
3518 BATCHNORM=n
3519 fi
3520 if [ "$NOGAP" = "y" ]; then
3521 log warning "NOGAP mode is not compatible with ONETRACK mode. Disabling..."
3522 NOGAP=n
3523 fi
3524 # It does not matter how many tracks we want. In ONETRACK mode we grab them all
3525 # FIXME # allow ranges of tracks to be selected for onetrack ripping
3526 if [ $# -gt 0 ]; then
3527 log warning "ONETRACK mode selected, grabbing all tracks..."
3528 fi
3529 else
3530 while [ $# -gt 0 ]; do
3531 # Range parsing code courtesy of Vincent Ho
3532 # Cleaned up to use shell built-ins by Charles Steinkuehler
3533 if [ "${1#*[^0-9-]}" != "$1" ]; then
3534 log error "syntax error while processing track numbers ($1)"
3535 exit 1
3536 else
3537 RSTART=${1%%-*}
3538 REND=${1##*-}
3539 while [ ${RSTART:=1} -le ${REND:=0} ] ; do
3540 TRACKQUEUE="$TRACKQUEUE $RSTART"
3541 RSTART=$(( $RSTART + 1 ))
3542 done
3543 fi
3544 shift
3545 done
3546 fi
3547
3548 # List of valid actions: cddb,read,normalize,encode,tag,move,playlist,clean
3549 # List of experimental actions: retag,transcode
3550
3551 # Determine what actions are to be done from $ACTIONS and set the
3552 # following environment variables for them:
3553 DOCDDB=n
3554 DOREAD=n
3555 DONORMALIZE=n
3556 DOPREPROCESS=n
3557 DOENCODE=n
3558 DOPOSTPROCESS=n
3559 DOTAG=n
3560 DOMOVE=n
3561 DOREPLAYGAIN=n
3562 DOPLAYLIST=n
3563 DOCLEAN=n
3564 ## FIXME ## Lets keep compatibility with -M
3565 [ "$DOCUE" != "y" ] && DOCUE=n
3566
3567 for ACTION in $(echo $ACTIONS | tr , \ )
3568 do
3569 case $ACTION in
3570 default) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOCLEAN=y;;
3571 cue) DOCUE=y ; MAKECUEFILE=y ;;
3572 cddb) DOCDDB=y;;
3573 read) DOREAD=y;;
3574 normalize) DONORMALIZE=y; DOREAD=y;;
3575 # preprocess) DOPREPROCESS=y; DOREAD=y;;
3576 encode) DOENCODE=y; DOREAD=y;;
3577 # postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
3578 tag) DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
3579 move) DOMOVE=y; DOTAG=y; DOREAD=y; DOENCODE=y; DOCDDB=y;;
3580 replaygain) DOCDDB=y; DOREAD=y; DOENCODE=y; DOTAG=y; DOMOVE=y; DOREPLAYGAIN=y;;
3581 playlist) DOCDDB=y; DOPLAYLIST=y;;
3582 clean) DOCLEAN=y;;
3583 esac
3584 done
3585
3586 if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
3587 # FIXME # should we abort on error or just inform the user?
3588 log warning "selected both normalize and replaygain actions"
3589 fi
3590
3591 for SHOWCDDBFIELD in $(echo $SHOWCDDBFIELDS | tr , \ ); do
3592 case $SHOWCDDBFIELD in
3593 y*|Y*) SHOWCDDBYEAR="y";;
3594 g*|G*) SHOWCDDBGENRE="y";;
3595 *) ;;
3596 esac
3597 done
3598
3599 # At this point a CDROM has to be defined, so we check it exists.
3600 if [ X"$CDROM" != "X" ] ; then
3601 if ( [ "$CDROMREADERSYNTAX" = "cdda2wav" ] || [ "$CDROMREADERSYNTAX" = "icedax" ] ) && [ "$NEEDCDROMID" = "y" ] ; then
3602 if [ "$OSFLAVOUR" = "FBSD" ]; then
3603 if echo "$CDROMID" | grep "^[0-9],[0-9],[0-9]$" >/dev/null 2>&1 ; then :; else
3604 log error "CDROMID not in the right format for $CDROMREADERSYNTAX"
3605 log error "Use \"cdrecord -scanbus\" to obtain an adequate ID and set CDROMID accordingly"
3606 exit 1
3607 fi
3608 fi
3609 elif [ ! -e "$CDROM" -a X"$DOREAD" = "Xy" ]; then
3610 log error "CDROM device cannot be found."
3611 exit 1
3612 fi
3613 # avoid processing if we are not going to hit the CDROM.
3614 elif [ X"$DOREAD" = "Xy" ]; then
3615 log error "CDROM has not been defined or cannot be found"
3616 exit 1
3617 fi
3618
3619 # USEPIPES pre-tests, before we get into more serious stuff
3620 # Not compatible with:
3621 # - mul