2 # Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
3 # Copyright (c) 2003-2006 Jesus Climent <jesus.climent@hispalinux.es>
4 # This code is hereby licensed for public consumption under either the
5 # GNU GPL v2 or greater, or Larry Wall's Artistic license - your choice.
7 # You should have received a copy of the GNU General Public License along
8 # with this program; if not, write to the Free Software Foundation, Inc.,
9 # 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
11 # Copyright for this work is to expire January 1, 2010, after which it
12 # shall be public domain.
16 VERSION
='2.3.99-$Revision$'
20 echo "This is abcde v$VERSION."
21 echo "Usage: abcde [options] [tracks]"
23 echo "-1 Encode the whole CD in a single file"
24 echo "-a <action1[,action2]...>"
25 echo " Actions to perform:"
26 echo " cddb,read,normalize,encode,tag,move,replaygain,playlist,clean"
27 #echo "-A Experimental actions (retag, transcode)"
28 echo "-b Enable batch normalization"
29 #echo "-B Disable batch replaygain (do file by file)"
31 echo " Specify a configuration file (overrides system and user config files)"
33 echo " Specify discid to resume from (only needed if you no longer have the cd)"
35 echo " Specify CDROM device to grab (flac uses a single-track flac file)"
36 echo "-D Debugging mode (equivalent to sh -x abcde)"
37 echo "-e Erase encoded track information from status file"
38 echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
39 echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
40 echo "-h This help information"
41 #echo "-i Tag files while encoding, when possible (local only) -NWY-"
42 echo "-j <#> Number of encoder processes to run at once (localhost)"
43 echo "-k Keep the wav tracks for later use"
44 echo "-l Use low disk space algorithm"
45 echo "-L Use local CDDB storage directory"
46 echo "-n No lookup. Don't query CDDB, just create and use template"
47 echo "-N Noninteractive. Never prompt for anything"
48 echo "-m Modify playlist to include CRLF endings, to comply with some players"
49 echo " WARNING: Deprecated. Use \"cue\" action"
50 #echo "-M Create a CUE file"
51 echo "-o <type1[,type2]...>"
52 echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav,m4a). Defaults to vorbis"
53 echo "-p Pad track numbers with 0's (if less than 10 tracks)"
54 echo "-P Use UNIX pipes to read+encode without wav files"
56 echo " Set quality level (high,medium,low)"
57 echo "-r <host1[,host2]...>"
58 echo " Also encode on these remote hosts"
59 echo "-R Use local CDDB in recursive mode"
61 echo " Show dielfs from the CDDB info (year,genre)"
62 echo "-S <#> Set the CD speed"
63 echo "-t <#> Start the track numbering at a given number"
64 echo "-T <#> Same as -t but modifies tag numbering"
65 echo "-U Do NOT use UNICODE (UTF8) tags and comments"
66 echo "-v Show version number and exit"
67 echo "-V Be a bit more verbose about what is happening behind the scenes"
68 echo "-x Eject CD after all tracks are read"
70 echo " Add a comment to the CD tracks"
71 echo "-W <#> Contatenate CDs: -T #01 -w \"CD #\""
72 echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
74 echo "Tracks is a space-delimited list of tracks to grab."
75 echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
77 #echo "Double hyphens are used to concatenate tracks"
82 echo "$@" >> "$ABCDETEMPDIR/status"
85 # log [level] [message]
87 # log outputs the right message in a common format
93 error
) echo "[ERROR] abcde: $@" >&2 ;;
94 warning
) echo "[WARNING] $@" >&2 ;;
95 info
) echo "[INFO] $@" ;;
99 # Funtions to replace the need of seq, which is too distribution dependant.
103 while [ $i -ne `expr $2 + 1` ]
113 if echo $i |
grep "[[:digit:]]" > /dev
/null
2>&1 ; then
114 while [ $i -ne `expr $2 + 1` ]
121 log error
"syntax error while processing track numbers"
126 # Functions to replace the need of awk {print $1} and {print $NF}
129 if [ X
"$1" = "X" ]; then
130 for first
in `cat`; do
141 if [ X
"$1" = "X" ]; then
142 for stdin
in `cat`; do
146 for last
in $@
; do :; done
151 # checkstatus [blurb]
152 # Returns "0" if the blurb was found, returns 1 if it wasn't
153 # Puts the blurb content, if available, on stdout.
154 # Otherwise, returns "".
157 # Take the last line in the status file if there's multiple matches
159 BLURB
=$
(egrep $PATTERN "$ABCDETEMPDIR/status" |
tail -n 1)
161 if [ -z "$BLURB" ]; then
166 # See if there's a = in it
167 if [ "$(echo $BLURB | grep -c =)" != "0" ]; then
168 echo "$(echo $BLURB | cut -f2- -d=)"
174 # checkwarnings [blurb]
175 # Returns "0" if the blurb was found (meaning there was an warning),
176 # returns 1 if it wasn't (yes this is a little backwards).
177 # Does not print the blurb on stdout.
178 # Otherwise, returns "".
181 if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
184 # Take the last line in the status file if there's multiple matches
186 BLURB
="$(egrep $PATTERN "$ABCDETEMPDIR/warnings
" | tail -n 1)"
188 if [ -z "$BLURB" ]; then
189 # negative, we did not have a negative...
192 # affirmative, we had a negative...
197 # checkerrors [blurb]
198 # Returns "0" if the blurb was found (meaning there was an error),
199 # returns 1 if it wasn't (yes this is a little backwards).
200 # Does not print the blurb on stdout.
201 # Otherwise, returns "".
204 if [ -e "$ABCDETEMPDIR/errors" ]; then :; else
207 # Take the last line in the status file if there's multiple matches
209 BLURB
="$(egrep $PATTERN "$ABCDETEMPDIR/errors
" | tail -n 1)"
211 if [ -z "$BLURB" ]; then
212 # negative, we did not have a negative...
215 # affirmative, we had a negative...
221 # Finds the right pager in the system to display a file
225 # Use the debian sensible-pager wrapper to pick the pager
226 # user has requested via their $PAGER environment variable
227 if [ -x "/usr/bin/sensible-pager" ]; then
228 /usr
/bin
/sensible-pager
"$PAGEFILE"
229 elif [ -x "$PAGER" ]; then
230 # That failed, try to load the preferred editor, starting
231 # with their PAGER variable
233 # If that fails, check for less
234 elif [ -x /usr
/bin
/less ]; then
235 /usr
/bin
/less -f "$PAGEFILE"
236 # more should be on all UNIX systems
237 elif [ -x /bin
/more ]; then
238 /bin
/more "$PAGEFILE"
240 # No bananas, just cat the thing
245 # run_command [blurb] [command...]
246 # Runs a command, silently if necessary, and updates the status file
251 # See if this is supposed to be silent
252 if [ "$(checkstatus encode-output)" = "loud" ]; then
256 # Special case for SMP, since
257 # encoder output is never displayed, don't mute echos
258 if [ -z "$BLURB" -a "$MAXPROCS" != "1" ]; then
267 normalize|normalize-audio
)
268 if [ "$RETURN" = "2" ]; then
269 # File was already normalized.
274 if [ "$RETURN" != "0" ]; then
275 # Put an error in the errors file. For various reasons we
276 # can't capture a copy of the program's output but we can
277 # log what we attempted to execute and the error code
278 # returned by the program.
279 if [ "$BLURB" ]; then
282 echo "${TWEAK}returned code $RETURN: $@" >> "$ABCDETEMPDIR/errors"
283 return $RETURN # Do not pass go, do not update the status file
285 if [ "$BLURB" ]; then
286 echo $BLURB >> "$ABCDETEMPDIR/status"
290 # relpath() and slash() are Copyright (c) 1999 Stuart Ballard and
291 # distributed under the terms of the GNU GPL v2 or later, at your option
293 # Function to determine if a word contains a slash.
302 # Function to give the relative path from one file to another.
303 # Usage: relpath fromfile tofile
304 # eg relpath music/Artist/Album.m3u music/Artist/Album/Song.mp3
305 # (the result would be Album/Song.mp3)
306 # Output is relative path to $2 from $1 on stdout
308 # This code has the following restrictions:
309 # Multiple ////s are not collapsed into single /s, with strange effects.
310 # Absolute paths and ../s are handled wrong in FR (but they work in TO)
311 # If FR is a directory it must have a trailing /
319 /*) ;; # No processing is needed for absolute paths
321 # Loop through common prefixes, ignoring them.
322 while slash
"$FR" && [ "$(echo "$FR" | cut -d/ -f1)" = "$(echo "$TO" | cut -d/ -f1)" ]
324 FR
="$(echo "$FR" | cut -d/ -f2-)"
325 TO
="$(echo "$TO" | cut -d/ -f2-)"
327 # Loop through directory portions left in FR, adding appropriate ../s.
330 FR
="$(echo "$FR" | cut -d/ -f2-)"
341 if [ ! "$@" = "" ]; then
342 # Cut off any command-line option we added in
343 X
=$
(echo $@ | cut
-d' ' -f2)
344 if [ "$(which $X)" = "" ]; then
346 elif [ ! -x $
(which $X) ]; then
355 if [ ! "$@" = "" ]; then
356 # Cut off any command-line option we added in
357 X
=$
(echo $@ | cut
-d' ' -f2)
358 # Test for built-in abcde.function
359 [ "$X" != "${X#abcde.}" ] && type $X >/dev
/null
2>&1 && return
360 if [ "$(which $X)" = "" ]; then
361 log error
"$X is not in your path." >&2
362 log info
"Define the full path to the executable if it exists on your system." >&2
363 if [ -e /etc
/debian_release
] ; then
365 oggenc
) MISSING_PACKAGE
=vorbis-tools
;;
366 lame|flac
) MISSING_PACKAGE
=$X ;;
368 log info
"Hint: apt-get install $MISSING_PACKAGE" >&2
371 elif [ ! -x "$(which $X)" ]; then
372 log error
"$X is not executable." >&2
378 # diffentries <filename> <max_value> <entry1>,<entry2>
379 # max_value: the range of entries goes from 1 to <max_value>
384 local CDDBDIFFCHOICES
=$1
386 local CDDBDIFFCHOICE
="$@"
387 if [ ! X
"$DIFF" = "X" ]; then
388 PARSECHOICE1
=$
(echo $CDDBDIFFCHOICE | cut
-d"," -f1 |
xargs printf %d
2>/dev
/null
)
389 PARSECHOICE2
=$
(echo $CDDBDIFFCHOICE | cut
-d"," -f2 |
xargs printf %d
2>/dev
/null
)
390 if [ $PARSECHOICE1 -lt 1 ] ||
[ $PARSECHOICE1 -gt $CDDBDIFFCHOICES ] || \
391 [ $PARSECHOICE2 -lt 1 ] ||
[ $PARSECHOICE2 -gt $CDDBDIFFCHOICES ] || \
392 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
393 echo "Invalid diff range. Please select two coma-separated numbers between 1 and $CDDBDIFFCHOICES" >&2
395 # We parse the 2 choices to diff, store them in temporary files and diff them.
396 for PARSECHOICE
in $
(echo $CDDBDIFFCHOICE |
tr , \
); do
397 do_cddbparse
"$ABCDETEMPDIR/$FILENAME.$PARSECHOICE" > "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE"
399 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/$FILENAME.diff"
400 $DIFF $DIFFOPTS "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/$FILENAME.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/$FILENAME.diff"
401 if [ $
(cat "$ABCDETEMPDIR/$FILENAME.diff" |
wc -l) -ge 24 ]; then
402 page
"$ABCDETEMPDIR/$FILENAME.diff"
404 cat "$ABCDETEMPDIR/$FILENAME.diff" >&2
408 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBDIFFCHOICES." >&2
413 # Finds an specific field from cddbinfo
418 TRACKNAME
="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
421 TRACKNAME
="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
427 # Get the track number we are going to use for different actions
430 if [ -n "$STARTTRACKNUMBER" ] ; then
431 # Get the trackpadding from the current track
432 CURRENTTRACKPADDING
=$
(echo -n $UTRACKNUM |
wc -c)
433 TRACKNUM
=$
( printf %0.
${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
435 TRACKNUM
=${UTRACKNUM}
441 # Calculate cddb disc ids without requiring specialized helper programs.
442 # largely copied from cd-discid and musicbrainz examples. some of the steps
443 # don't make sense, but they're necessary to match the ids generated by other
446 ## FIXME ## Right now, we get 2 frames more than with cue2discid ??
447 # data@petit:~$ sh /tmp/cue2discid /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac
448 # processing offsetimes 00:00:00 04:47:10 08:20:37 11:46:46 17:45:36 21:41:57 27:32:21 32:03:73 35:39:28 38:27:33 43:50:38 44:42:34
449 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2895
450 # data@petit:~$ metaflac --export-cuesheet-to=- /home/data/tmp/flac/01.Roisin_Murphy--Ruby_Blue.flac| python /home/data/sources/abcde/trunk/examples/cue2discid
451 # 980b4b0c 12 150 21685 37687 53146 80061 97782 124071 144448 160603 173208 197438 201334 2893
453 # Variables: OFFSETS, TRACKS, LEADOUT, [LEADIN]
456 if [ X
"$LEADOUT" = "X" ]; then
457 log warning
"Error trying to calculate disc ids without lead-out information."
461 # default to a two second lead-in
463 LEADIN
=${LEADIN:=150}
465 # number of cdframes per second
468 # reset cddb checksum for cddb disc-id calululation
472 for OFFSET
in $
(echo $OFFSETS)
474 COOKEDOFFSETS
="${COOKEDOFFSETS} $(($OFFSET + $LEADIN))"
476 OFFSETTIME
=$
(( ($OFFSET + $LEADIN) / $CDFRAMES ))
477 while [ $OFFSETTIME -gt 0 ]; do
478 CDDBCKSUM
=$
(($CDDBCKSUM + $OFFSETTIME % 10))
479 OFFSETTIME
=$
(($OFFSETTIME / 10))
484 COOKEDOFFSETS
="${COOKEDOFFSETS:1}" # eat the leading space
486 PREGAP
=$
(($
(echo $OFFSETS | cut
-f1 -d' ')))
487 TOTALTIME
=$
(( (($LEADOUT + $LEADIN + $PREGAP) / $CDFRAMES) - (($LEADIN + $PREGAP) / $CDFRAMES)))
489 printf -v HEXSUM
"%08lx" $
(( ($CDDBCKSUM % 0xff) << 24 | $TOTALTIME << 8 | $TRACKS))
490 TRACKINFO="${HEXSUM} $((TRACKS)) ${COOKEDOFFSETS} $((($LEADOUT + $LEADIN + $IDMAGICNUM) / $CDFRAMES))"
495 if checkstatus replaygain; then :; else
496 run_command "" echo "Adding replygain information..."
497 for TMPOUTPUT in $( echo $OUTPUTTYPE | tr , \ )
501 OUTPUT=$OGGOUTPUTCONTAINER
504 OUTPUT=$FLACOUTPUTCONTAINER
512 for UTRACKNUM in $TRACKQUEUE
514 CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
515 getcddbinfo TRACKNAME
517 TRACKFILE="$(mungefilename "$TRACKNAME")"
518 ARTISTFILE="$(mungefilename "$TRACKARTIST")"
519 ALBUMFILE="$(mungefilename "$DALBUM")"
520 GENRE="$(mungegenre "$GENRE")"
521 YEAR=${CDYEAR:-$CDYEAR}
523 if [ "$ONETRACK" = "y" ]; then
524 if [ "$VARIOUSARTISTS" = "y" ]; then
525 OUTPUTFILE="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
527 OUTPUTFILE="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
530 if [ "$VARIOUSARTISTS" = "y" ]; then
531 OUTPUTFILE="$(eval echo \""$VAOUTPUTFORMAT"\")"
533 OUTPUTFILE="$(eval echo \""$OUTPUTFORMAT"\")"
536 OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
537 (( REPLAYINDEX = $REPLAYINDEX + 1 ))
541 run_command replaygain-flac nice $ENCNICE $METAFLAC --add-replay-gain "${OUTPUTFILES[@]}"
544 run_command replaygain-vorbis nice $ENCNICE $VORBISGAIN --album "${OUTPUTFILES[@]}"
547 run_command replaygain-mp3 nice $ENCNICE $MP3GAIN -a "${OUTPUTFILES[@]}"
550 run_command replaygain-mpc nice $ENCNICE $MPPGAIN --auto "${OUTPUTFILES[@]}"
555 if checkerrors "replaygain-.{3,6}"; then :; else
556 run_command replaygain true
561 # This code splits the a Various Artist track name from one of the following
564 # forward: Artist / Track
565 # forward-dash: Artist - Track
566 # reverse: Track / Artist
567 # reverse-dash: Track - Artist
568 # colon: Artist: Track
569 # trailing-paren: Artist (Track)
572 # VARIOUSARTISTS, VARIOUSARTISTSTYLE, TRACKNAME, TRACKARTIST
575 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
576 case "$VARIOUSARTISTSTYLE" in
578 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
579 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
580 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
583 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
584 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
585 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
588 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's- / -~-g')"
589 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
590 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
593 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's, - ,~,g')"
594 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
595 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
598 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's-: -~-g')"
599 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
600 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
603 DTITLEARTIST="$(echo "$TRACKNAME" | sed 's,^\(.*\) (\(.*\)),\1~\2,')"
604 TRACKARTIST="$(echo "$DTITLEARTIST" | cut -f2 -d~)"
605 TRACKNAME="$(echo "$DTITLEARTIST" | cut -f1 -d~)"
608 elif [ "$VARIOUSARTISTS" = "y" ] && [ "$ONETRACK" = "y" ]; then
609 TRACKARTIST="Various"
611 TRACKARTIST="$DARTIST"
616 local genre=$(echo "${@}" | tr '[A-Z]' '[a-z]')
620 "classic rock") id=1 ;;
638 "industrial") id=19 ;;
639 "alternative") id=20 ;;
641 "death metal") id=22 ;;
643 "soundtrack") id=24 ;;
644 "euro-techno") id
=25 ;;
648 "jazz+funk") id
=29 ;;
651 "classical") id
=32 ;;
652 "instrumental") id
=33 ;;
656 "sound clip") id
=37 ;;
659 "alt. rock") id
=40 ;;
664 "meditative") id
=45 ;;
665 "instrum. pop") id
=46 ;;
666 "instrum. rock") id
=47 ;;
670 "techno-indust.") id
=51 ;;
671 "electronic") id
=52 ;;
673 "eurodance") id
=54 ;;
675 "southern rock") id
=56 ;;
680 "christian rap") id
=61 ;;
681 "pop/funk"|
"pop / funk") id
=62 ;;
683 "native american") id
=64 ;;
686 "psychadelic") id
=67 ;;
688 "showtunes") id
=69 ;;
692 "acid punk") id
=73 ;;
693 "acid jazz") id
=74 ;;
697 "rock & roll") id
=78 ;;
698 "hard rock") id
=79 ;;
700 "folk/rock") id
=81 ;;
701 "national folk") id
=82 ;;
708 "bluegrass") id
=89 ;;
709 "avantgarde") id
=90 ;;
710 "gothic rock") id
=91 ;;
711 "progress. rock") id
=92 ;;
712 "psychadel. rock") id
=93 ;;
713 "symphonic rock") id
=94 ;;
714 "slow rock") id
=95 ;;
717 "easy listening") id
=98 ;;
723 "chamber music") id
=104 ;;
725 "symphony") id
=106 ;;
726 "booty bass") id
=107 ;;
728 "porn groove") id
=109 ;;
730 "slow jam") id
=111 ;;
734 "folklore") id
=115 ;;
736 "power ballad") id
=117 ;;
737 "rhythmic soul") id
=118 ;;
738 "freestyle") id
=119 ;;
740 "punk rock") id
=121 ;;
741 "drum solo") id
=122 ;;
742 "a capella") id
=123 ;;
743 "euro-house") id
=124 ;;
744 "dance hall") id
=125 ;;
746 "drum & bass") id
=127 ;;
747 "club-house") id
=128 ;;
748 "hardcore") id
=129 ;;
752 "negerpunk") id
=133 ;;
753 "polsk punk") id
=134 ;;
755 "christian gangsta rap") id
=136 ;;
756 "heavy metal") id
=137 ;;
757 "black metal") id
=138 ;;
758 "crossover") id
=139 ;;
759 "contemporary christian")id
=140 ;;
760 "christian rock") id
=141 ;;
761 "merengue") id
=142 ;;
763 "thrash metal") id
=144 ;;
766 "synthpop") id
=147 ;;
767 "rock/pop"|
"rock / pop") id
=148 ;;
774 # do_tag [tracknumber]
775 # id3 tags a filename
777 # TRACKS, TRACKNAME, TRACKARTIST, TAGGER, TAGGEROPTS, VORBISCOMMENT, METAFLAC,
778 # COMMENT, DALBUM, DARTIST, CDYEAR, CDGENRE (and temporarily) ID3TAGV
781 COMMENTOUTPUT
="$(eval echo ${COMMENT})"
782 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
783 run_command
'' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
784 # If we want to start the tracks with a given number, we need to modify the
785 # TRACKNUM value before evaluation
786 if [ -n "$STARTTRACKNUMBERTAG" ] ; then
789 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
793 # id3v2 v0.1.9 claims to have solved the -c bug, so we merge both id3 and id3v2
794 GENREID
=$
(do_getgenreid
"${CDGENRE}")
799 # FIXME # track numbers in mp3 come with 1/10, so we cannot
800 # happily substitute them with $TRACKNUM
801 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE $TAGGER $TAGGEROPTS \
802 --comment=::"$COMMENTOUTPUT" -A "$DALBUM" \
803 -a "$TRACKARTIST" -t "$TRACKNAME" -Y "$CDYEAR" \
804 -G "$GENREID" -n "${TRACKNUM:-$1}" \
805 "${TRACKNUM:+-N $TRACKS}" \
806 "${ENCODING:+--set-encoding=$ENCODING}" \
807 "$ABCDETEMPDIR/track$1.$OUTPUT"
809 # FIXME # Still not activated...
811 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
812 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
813 -a "$DALBUM" -n "$TRACKARTIST" -s "$TRACKNAME" \
814 -y "$CDYEAR" -g "$GENREID" -k "${TRACKNUM:-$1}" \
815 "$ABCDETEMPDIR/track$1.$OUTPUT"
818 # FIXME # track numbers in mp3 come with 1/10, so we cannot
819 # happily substitute them with $TRACKNUM
820 run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
821 $TAGGER $TAGGEROPTS -c "$COMMENTOUTPUT" \
822 -A "$DALBUM" -a "$TRACKARTIST" -t "$TRACKNAME" \
823 -y "$CDYEAR" -g "$GENREID" \
824 -T "${TRACKNUM:-$1/$TRACKS}" \
825 "$ABCDETEMPDIR/track$1.$OUTPUT"
830 case "$OGGENCODERSYNTAX" in
832 # vorbiscomment can't do in-place modification, mv the file first
833 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" -a ! -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" ]; then
834 mv "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
838 # http://www.xiph.org/ogg/vorbis/doc/v-comment.html
840 echo ARTIST
="$TRACKARTIST"
842 echo TITLE
="$TRACKNAME"
843 if [ -n "$CDYEAR" ]; then
846 if [ -n "$CDGENRE" ]; then
847 echo GENRE
="$CDGENRE"
849 echo TRACKNUMBER
=${TRACKNUM:-$1}
850 echo CDDB
=$CDDBDISCID
851 if [ "$(eval echo ${COMMENT})" != "" ]; then
852 case "$COMMENTOUTPUT" in
853 *=*) echo "$COMMENTOUTPUT";;
854 *) echo COMMENT
="$COMMENTOUTPUT";;
857 ) | run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE \
858 $VORBISCOMMENT $VORBISCOMMENTOPTS -w \
859 "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
860 # Doublecheck that the commented file was created
861 # successfully before wiping the original
862 if [ -f "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER" ]; then
863 rm -f "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER"
865 mv "$ABCDETEMPDIR/track$1.uncommented.$OGGOUTPUTCONTAINER" "$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
872 echo ARTIST
="$TRACKARTIST"
874 echo TITLE
="$TRACKNAME"
875 if [ -n "$CDYEAR" ]; then
878 if [ -n "$CDGENRE" ]; then
879 echo GENRE
="$CDGENRE"
881 echo TRACKNUMBER
="${TRACKNUM:-$1}"
882 echo CDDB
="$CDDBDISCID"
883 if [ "$(eval echo ${COMMENT})" != "" ]; then
884 case "$COMMENTOUTPUT" in
885 *=*) echo "$COMMENTOUTPUT";;
886 *) echo COMMENT
="$COMMENTOUTPUT";;
889 ) | run_command tagtrack-
$OUTPUT-$1 nice
$ENCNICE $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
892 run_command tagtrack-
$OUTPUT-$1 true
895 run_command tagtrack-
$OUTPUT-$1 true
898 run_command tagtrack-
$OUTPUT-$1 true
901 run_command tagtrack-
$OUTPUT-$1 true
905 if checkerrors
"tagtrack-(.{3,6})-$1"; then :; else
906 run_command tagtrack-
$1 true
913 # OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
916 # The commands here don't go through run_command because they're never
917 # supposed to be silenced
918 echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
919 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
923 case "$MP3ENCODERSYNTAX" in
928 for UTRACKNUM
in $TRACKQUEUE
930 TRACKFILES
="$TRACKFILES track$UTRACKNUM.wav"
932 nice
$ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
934 if [ "$RETURN" != "0" ]; then
935 echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
937 for UTRACKNUM
in $TRACKQUEUE
939 run_command encodetrack-
$OUTPUT-$UTRACKNUM true
940 #run_command encodetrack-$UTRACKNUM true
949 if checkerrors
"nogap-encode"; then :; else
950 if [ ! "$KEEPWAVS" = "y" ] ; then
951 if [ ! "$KEEPWAVS" = "move" ] ; then
956 # Other encoders fall through to normal encoding as the tracks have not
957 # been entered in the status file.
960 # do_encode [tracknumber] [hostname]
961 # If no hostname is specified, encode locally
963 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
966 if [ "$USEPIPES" = "y" ]; then
969 TEMPARG
="PIPE_$MP3ENCODERSYNTAX"
972 TEMPARG
="PIPE_$OGGENCODERSYNTAX"
975 TEMPARG
="PIPE_$FLACENCODERSYNTAX"
978 TEMPARG
="PIPE_$SPEEXENCODER"
981 TEMPARG
="PIPE_$MPPENCODER"
984 TEMPARG
="PIPE_$MPPENCODER"
987 IN
="$( eval echo "\$
$TEMPARG" )"
989 IN
="$ABCDETEMPDIR/track$1.wav"
992 case "$MP3ENCODERSYNTAX" in
993 # FIXME # check if mp3enc needs -if for pipes
994 # FIXME # I have not been able to find a working mp3enc binary
1008 # We need IN to proceed, if we are not using pipes.
1009 if [ -s "$IN" -o X
"$USEPIPES" = "Xy" ] ; then
1010 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1012 case "$TMPOUTPUT" in
1014 OUTPUT
=$OGGOUTPUTCONTAINER
1017 OUTPUT
=$FLACOUTPUTCONTAINER
1023 OUT
="$ABCDETEMPDIR/track$1.$OUTPUT"
1024 if [ "$NOGAP" = "y" ] && checkstatus encodetrack-
$OUTPUT-$1 ; then
1027 if [ X
"$USEPIPES" = "Xy" ]; then
1029 # We need a way to store the creation of the files when using PIPES
1030 RUN_COMMAND_PIPES
="run_command encodetrack-$OUTPUT-$1 true"
1031 # When pipping it does not make sense to have a higher nice for
1032 # reading than for encoding, since it will be hold by the
1033 # encoding process. Setting an effective nice, to calm down a
1034 # bit the reading process.
1035 EFFECTIVE_NICE
=$READNICE
1037 run_command
'' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
1038 RUN_COMMAND
="run_command encodetrack-$OUTPUT-$1"
1039 EFFECTIVE_NICE
=$ENCNICE
1045 case "$MP3ENCODERSYNTAX" in
1046 lame|toolame|gogo
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS "$IN" "$OUT" ;;
1047 bladeenc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER $MP3ENCODEROPTS -quit "$IN" ;;
1048 l3enc|xingmp3enc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER "$IN" "$OUT" $MP3ENCODEROPTS ;;
1049 # FIXME # Relates to the previous FIXME since it might need the "-if" removed.
1050 mp3enc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $MP3ENCODER -if "$IN" -of "$OUT" $MP3ENCODEROPTS ;;
1054 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev
/null
2>&1
1061 case "$OGGENCODERSYNTAX" in
1062 vorbize
) $RUN_COMMAND nice
$EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -w "$OUT" "$IN" ;;
1063 oggenc
) $RUN_COMMAND nice
$EFFECTIVE_NICE $OGGENCODER $OGGENCODEROPTS -o "$OUT" "$IN" ;;
1067 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" >/dev
/null
2>&1
1074 case "$FLACENCODERSYNTAX" in
1075 flac
) $RUN_COMMAND nice
$EFFECTIVE_NICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
1080 vecho
"$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
1081 $RUN_COMMAND nice
$DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev
/null
2>&1
1086 if [ "$(eval echo ${COMMENT})" != "" ]; then
1089 *) COMMENT
="COMMENT=$COMMENT" ;;
1091 COMMENT
="--comment \"$COMMENT\""
1093 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1094 if [ ! "$DOTAG" = "y" ]; then
1095 $RUN_COMMAND nice
$EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS --author "$TRACKARTIST" --title "$TRACKNAME" "$COMMENT" "$IN" "$OUT"
1097 $RUN_COMMAND nice
$EFFECTIVE_NICE $SPEEXENCODER $SPEEXENCODEROPTS "$IN" "$OUT"
1101 # MPP/MP+(Musepack) format (.mpc) is done locally, with inline
1103 # I tried compiling the mppenc from corecodecs.org and got some
1104 # errors, so I have not tried it myself.
1105 ## FIXME ## Needs some cleanup to determine if an empty tag sent
1106 ## FIXME ## to the encoder ends up empty.
1107 $RUN_COMMAND nice
$EFFECTIVE_NICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
1110 # Quick hack to avoid tagging Ogg/Speex, since there is no other way to tag than inline tagging
1111 if [ ! "$DOTAG" = "y" ]; then
1112 $RUN_COMMAND nice
$EFFECTIVE_NICE $AACENCODER $AACENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -o "$OUT" "$IN"
1115 $RUN_COMMAND nice
$ENCNICE $AACENCODER $AACENCODEROPTS -o "$OUT" "$IN"
1119 # In case of wav output we need nothing. Just keep the wavs.
1124 # Only remove .wav if the encoding succeeded
1125 if checkerrors
"encodetrack-(.{3,6})-$1"; then :; else
1126 run_command encodetrack-
$1 true
1127 if [ ! "$KEEPWAVS" = "y" ] ; then
1128 if [ ! "$KEEPWAVS" = "move" ] ; then
1134 run_command
"" echo "HEH! The file we were about to encode disappeared:"
1135 run_command
"" echo ">> $IN"
1136 run_command encodetrack-
$1 false
1140 # do_preprocess [tracknumber]
1142 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1145 # IN="$ABCDETEMPDIR/track$1.wav"
1146 # # We need IN to proceed.
1147 # if [ -s "$IN" ] ; then
1148 # for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
1150 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1151 # run_command '' echo "Pre-processing track $1 of $TRACKS..."
1152 # case "$POSTPROCESSFORMAT" in
1154 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $WAV_PRE $IF $OF ;;
1156 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $MP3_PRE $IF $OF ;;
1158 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $OGG_PRE $IF $OF ;;
1160 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $FLAC_PRE $IF $OF ;;
1162 # run_command preprocess-$OUTPUT-$1 nice $PRENICE $SPX_PRE $IF $OF ;;
1165 # # Only remove .wav if the encoding succeeded
1166 # if checkerrors "preprocess-(.{3,4})-$1"; then
1167 # run_command preprocess-$1 false
1169 # run_command preprocess-$1 true
1172 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1173 # echo "HEH! The file we were about to pre-process disappeared:"
1176 # run_command preprocess-$1 false
1181 # do_postprocess [tracknumber]
1183 # TRACKS, TRACKNAME, TRACKARTIST, DISTMP3, DISTMP3OPTS, {FOO}ENCODERSYNTAX, OUTPUTTYPE, ENCODEROPTS, DALBUM, DARTIST, ENCNICE, CDYEAR, CDGENRE, COMMENT
1186 # for POSTPROCESSFORMAT in $(echo $POSTPROCESSFORMATS | tr , \ )
1188 # IN="$ABCDETEMPDIR/track$1.$POSTPROCESSFORMAT"
1189 # # We need IN to proceed.
1190 # if [ -s "$IN" ] ; then
1191 # #OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
1192 # run_command '' echo "Post-processing track $1 of $TRACKS..."
1193 # case "$POSTPROCESSFORMAT" in
1195 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $MP3_POST $IF $OF ;;
1197 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $OGG_POST $IF $OF ;;
1199 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $FLAC_POST $IF $OF ;;
1201 # run_command postprocess-$OUTPUT-$1 nice $POSTNICE $SPX_POST $IF $OF ;;
1203 # # Only remove .wav if the encoding succeeded
1204 # if checkerrors "postprocess-(.{3,4})-$1"; then
1205 # run_command postprocess-$1 false
1207 # run_command postprocess-$1 true
1210 # if [ "$(checkstatus encode-output)" = "loud" ]; then
1211 # echo "HEH! The file we were about to post-process disappeared:"
1214 # run_command postprocess-$1 false
1229 # MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
1233 # The commands here don't go through run_command because they're never supposed to be silenced
1234 echo "Batch analizing gain in tracks: $TRACKQUEUE"
1239 for UTRACKNUM
in $TRACKQUEUE
1241 MP3FILES
="$TRACKFILES track$UTRACKNUM.mp3"
1243 # FIXME # Hard-coded batch option!
1244 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1246 if [ "$RETURN" != "0" ]; then
1247 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1249 for UTRACKNUM
in $TRACKQUEUE
1251 echo normalizetrack-
$UTRACKNUM >> status
1257 # do_batch_normalize
1259 # NORMALIZER, NORMALIZEROPTS
1260 do_batch_normalize
()
1262 # The commands here don't go through run_command because they're never supposed to be silenced
1263 echo "Batch normalizing tracks: $TRACKQUEUE"
1268 for UTRACKNUM
in $TRACKQUEUE
1270 TRACKFILES
="$TRACKFILES track$UTRACKNUM.wav"
1272 # XXX: Hard-coded batch option!
1273 $NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
1275 if [ "$RETURN" != "0" ]; then
1276 echo "batch-normalize: $NORMALIZER returned code $RETURN" >> errors
1278 for UTRACKNUM
in $TRACKQUEUE
1280 echo normalizetrack-
$UTRACKNUM >> status
1286 # do_normalize [tracknumber]
1288 # TRACKS, TRACKNAME, NORMALIZER, NORMALIZEROPTS
1291 IN
="$ABCDETEMPDIR/track$1.wav"
1292 if [ -e "$IN" ] ; then
1293 run_command
'' echo "Normalizing track $1 of $TRACKS: $TRACKNAME..."
1294 run_command normalizetrack-
$1 $NORMALIZER $NORMALIZEROPTS "$IN"
1296 if [ "$(checkstatus encode-output)" = "loud" ]; then
1297 echo "HEH! The file we were about to normalize disappeared:"
1300 run_command normalizetrack-
$1 false
"File $IN was not found"
1304 # do_move [tracknumber]
1305 # Deduces the outfile from environment variables
1306 # Creates directory if necessary
1308 # TRACKNUM, TRACKNAME, TRACKARTIST, DALBUM, OUTPUTFORMAT, CDGENRE, CDYEAR
1311 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1313 # For now, set OUTPUT as TMPOUTPUT, and then change it once we have
1314 # defined the OUTPUTFILE:
1317 # Create ALBUMFILE, ARTISTFILE, TRACKFILE
1318 # Munge filenames as follows:
1323 # Eat control characters
1324 ALBUMFILE
="$(mungefilename "$DALBUM")"
1325 ARTISTFILE
="$(mungefilename "$TRACKARTIST")"
1326 TRACKFILE
="$(mungefilename "$TRACKNAME")"
1327 GENRE
="$(mungegenre "$GENRE")"
1328 YEAR
=${CDYEAR:-$CDYEAR}
1329 # If we want to start the tracks with a given number, we need to modify
1330 # the TRACKNUM value before evaluation
1332 # Supported variables for OUTPUTFORMAT are GENRE, YEAR, ALBUMFILE,
1333 # ARTISTFILE, TRACKFILE, and TRACKNUM.
1334 if [ "$ONETRACK" = "y" ]; then
1335 if [ "$VARIOUSARTISTS" = "y" ]; then
1336 OUTPUTFILE
="$(eval echo \""$VAONETRACKOUTPUTFORMAT"\")"
1338 OUTPUTFILE
="$(eval echo \""$ONETRACKOUTPUTFORMAT"\")"
1341 if [ "$VARIOUSARTISTS" = "y" ]; then
1342 OUTPUTFILE
="$(eval echo \""$VAOUTPUTFORMAT"\")"
1344 OUTPUTFILE
="$(eval echo \""$OUTPUTFORMAT"\")"
1347 if checkerrors
"tagtrack-$OUTPUT-$1"; then :; else
1348 # Once we know the specific output was successful, we can change
1349 # the OUTPUT to the value containing the container
1352 OUTPUT
=$OGGOUTPUTCONTAINER
1355 OUTPUT
=$FLACOUTPUTCONTAINER
1361 # Check that the directory for OUTPUTFILE exists, if it doesn't, create it
1362 OUTPUTFILEDIR
="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
1365 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1366 # FIXME # introduce warnings?
1369 # mkdir -p shouldn't return an error if the directory already exists
1370 mkdir
-p "$OUTPUTFILEDIR"
1371 run_command movetrack-
$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1372 if checkstatus movetrack-output-
$OUTPUT; then :; else
1373 run_command movetrack-output-
$OUTPUT true
1378 # mkdir -p shouldn't return an error if the directory already exists
1379 mkdir
-p "$OUTPUTFILEDIR"
1380 run_command movetrack-
$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
1381 if checkstatus movetrack-output-
$OUTPUT; then :; else
1382 run_command movetrack-output-
$OUTPUT true
1386 # Lets move the cue file
1387 if CUEFILE
=$
(checkstatus cuefile
) >/dev
/null
; then
1388 if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
1389 if checkstatus movecue-
$OUTPUT; then :; else
1390 # Silence the Copying output since it overlaps with encoding processes...
1391 #run_command '' vecho "Copying cue file to its destination directory..."
1392 if checkstatus onetrack
>/dev
/null
; then
1395 if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
1396 # We dont have the dir, since it was not created before.
1399 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1402 # NOTE: Creating a cue file with the 3-char-extension files is to comply with
1403 # http://brianvictor.tripod.com/mp3cue.htm#details
1404 [a-z0-9
][a-z0-9
][a-z0-9
])
1405 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
1408 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT.cue"
1412 run_command movecue-
$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTFILEDIR/$CUEFILE"
1414 echo movecue-
$OUTPUT >> "$ABCDETEMPDIR/status"
1423 # Create the playlist if wanted
1425 # PLAYLISTFORMAT, PLAYLISTDATAPREFIX, VAPLAYLISTFORMAT, VAPLAYLISTDATAPREFIX,
1426 # VARIOUSARTISTS, OUTPUTDIR
1429 for TMPOUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
1433 OUTPUT
=$OGGOUTPUTCONTAINER
1436 OUTPUT
=$FLACOUTPUTCONTAINER
1442 # Create a playlist file for the playlist data to go into.
1443 # We used to wipe it out if it existed. Now we request permision if interactive.
1444 for LASTTRACK
in $TRACKQUEUE; do :; done
1445 ALBUMFILE
="$(mungefilename "$DALBUM")"
1446 ARTISTFILE
="$(mungefilename "$DARTIST")"
1447 GENRE
="$(mungegenre "$GENRE")"
1448 YEAR
=${CDYEAR:-$CDYEAR}
1449 if [ "$VARIOUSARTISTS" = "y" ] ; then
1450 PLAYLISTFILE
="$(eval echo "$VAPLAYLISTFORMAT")"
1452 PLAYLISTFILE
="$(eval echo "$PLAYLISTFORMAT")"
1454 FINALPLAYLISTDIR
="$(dirname "$OUTPUTDIR/$PLAYLISTFILE")"
1455 mkdir
-p "$FINALPLAYLISTDIR"
1456 if [ -s "$OUTPUTDIR/$PLAYLISTFILE" ]; then
1457 echo -n "Erase, Append to, or Keep the existing playlist file? [e/a/k] (e): " >&2
1458 if [ "$INTERACTIVE" = "y" ]; then
1459 while [ "$DONE" != "y" ]; do
1461 case $ERASEPLAYLIST in
1462 e|E|a|A|k|K
) DONE
=y
;;
1463 "") ERASEPLAYLIST
=e
; DONE
=y
;;
1471 # Once we erase the playlist, we use append to create the new one.
1472 [ "$ERASEPLAYLIST" = "e" -o "$ERASEPLAYLIST" = "E" ] && rm -f "$OUTPUTDIR/$PLAYLISTFILE" && ERASEPLAYLIST
=a
1474 # The playlist does not exist, so we can safelly use append to create the new list
1477 if [ "$ERASEPLAYLIST" = "a" -o "$ERASEPLAYLIST" = "A" ]; then
1478 touch "$OUTPUTDIR/$PLAYLISTFILE"
1479 for UTRACKNUM
in $TRACKQUEUE
1481 # Shares some code with do_move since the filenames have to match
1482 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
1483 getcddbinfo TRACKNAME
1485 TRACKFILE
="$(mungefilename "$TRACKNAME")"
1486 ARTISTFILE
="$(mungefilename "$TRACKARTIST")"
1487 ALBUMFILE
="$(mungefilename "$DALBUM")"
1488 # If we want to start the tracks with a given number, we need to modify the
1489 # TRACKNUM value before evaluation
1491 if [ "$VARIOUSARTISTS" = "y" ]; then
1492 OUTPUTFILE
="$(eval echo \""$VAOUTPUTFORMAT\"")"
1494 OUTPUTFILE
="$(eval echo \""$OUTPUTFORMAT\"")"
1496 if [ "$VARIOUSARTISTS" = "y" ]; then
1497 if [ "$VAPLAYLISTDATAPREFIX" ] ; then
1498 echo ${VAPLAYLISTDATAPREFIX}$OUTPUTFILE.
$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1500 relpath
"$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1503 if [ "$PLAYLISTDATAPREFIX" ]; then
1504 echo ${PLAYLISTDATAPREFIX}$OUTPUTFILE.
$OUTPUT >> "$OUTPUTDIR/$PLAYLISTFILE"
1506 relpath
"$PLAYLISTFILE", "$OUTPUTFILE.$OUTPUT" >> "$OUTPUTDIR/$PLAYLISTFILE"
1511 ## this will convert the playlist to have CRLF line-endings, if specified
1512 ## (some hardware players insist on CRLF endings)
1513 if [ "$DOSPLAYLIST" = "y" ]; then
1514 awk '{substr("\r",""); printf "%s\r\n", $0}' "$OUTPUTDIR/$PLAYLISTFILE" > "$ABCDETEMPDIR/PLAYLISTFILE.tmp"
1515 # mv -f "$ABCDETEMPDIR/PLAYLISTFILE.tmp" "$OUTPUTDIR/$PLAYLISTFILE"
1516 cat "$ABCDETEMPDIR/PLAYLISTFILE.tmp" |
sed 's/\//\\/' > "$OUTPUTDIR/$PLAYLISTFILE"
1518 echo "playlistcomplete" >> "$ABCDETEMPDIR/status"
1523 # This function reads a cuefile on stdin and writes an extended
1524 # cddb query on stdout. Any PREGAP for track 1 is properly
1525 # handled, although cue files embedded in FLAC files do not
1526 # appear to properly store the PREGAP setting. :(
1527 abcde.cue2discid
() {
1532 while [ $val -gt 0 ] ; do
1533 ret
=$
(( $ret + ( $val % 10) ))
1534 val
=$
(( $val / 10 ))
1544 local first second third
1545 first
=$
(expr ${1} + 0 )
1546 second
=$
(expr ${2} + 0 )
1547 third
=$
(expr ${3} + 0 )
1549 echo $
(( ((($first * 60) + $second) * 75) + $third ))
1559 while read line
; do
1562 TRACK
) i
=$
(( i
+ 1 ))
1564 INDEX
) if [ "$2" -eq 1 ] ; then
1566 START
=$
(( $LBA + $PREGAP + $OFFSET ))
1568 X
=$
(cddb_sum $
(( $START / 75 )) )
1572 PREGAP
) PREGAP
=$
(msf2lba
$2)
1576 LEADOUT
=$
(( $4 / 588 ))
1579 LEADIN
=$
(( $3 / 588 ))
1588 LEADOUT
=$
(( $LEADOUT + $LEADIN ))
1590 LENGTH
=$
(( $LEADOUT/75 - $TRACK1/75 ))
1591 DISCID
=$
(( ( $N % 255 ) * 2**24 |
$LENGTH * 2**8 |
$TRACKS ))
1592 printf "%08x %i" $DISCID $TRACKS
1595 while [ $j -le $TRACKS ] ; do
1596 eval echo -n "\" \$TRACK$j\""
1599 echo " $(( $LEADOUT / 75 ))"
1603 # abcde.mkcue [--wholedisk]
1604 # This creates a cuefile directly from the extended discid information
1605 # The --wholedisk option controls whether we're ripping data from the
1606 # start of track one or from the start of the disk (usually, but not
1607 # always the same thing!)
1609 # Track one leadin/pregap (if any) handeling:
1610 # --wholedisk specified:
1613 # INDEX 01 <pregap value>
1614 # Remaining track index values unchanged from disc TOC
1616 # --wholedisk not specified
1618 # PREGAP <pregap value>
1620 # Remaining track index values offset by <pregap value>
1627 printf "$1%02i:%02i:%02i\n" $
(($2/4500)) $
((($2/75)%60)) $
(($2%75))
1630 local MODE DISCID TRACKS
1634 if [ "$1" = --wholedisc ] ; then
1646 echo REM DISCID
$DISCID
1647 echo FILE
\"dummy.wav
\" WAVE
1649 if [ $1 -ne 150 ] && [ $MODE = "PREGAP"] ; then
1656 while [ $i -le "$TRACKS" ] ; do
1657 LBA
=$
(( $1 - $OFFSET ))
1658 printf " TRACK %02i AUDIO\n" $i
1659 if [ $i -eq 1 -a $1 -ne 150 ] ; then
1660 if [ $MODE = PREGAP
] ; then
1661 echomsf
" PREGAP " $
(($OFFSET-150))
1663 echo " INDEX 00 00:00:00"
1666 echomsf
" INDEX 01 " $LBA
1673 # This essentially the start of things
1676 # Query the CD to get the track info, unless the user specified -C
1677 # or we are using some actions which do not need the CDDB data at all
1678 #if [ ! X"$EXPACTIONS" = "X" ]; then
1680 #elif [ -z "$DISCID" ]; then
1681 if [ -z "$DISCID" ]; then
1682 vecho
-n "Getting CD track info... "
1683 # In OSX, unmount the disc before a query
1684 if [ "$OSFLAVOUR" = "OSX" ]; then
1685 disktool
-u ${CDROM#/dev/}
1687 case "$CDROMREADERSYNTAX" in
1689 if $METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" > /dev
/null
2>&1 ; then
1690 case "$CUE2DISCID" in
1691 # FIXME # right now we have 2 cue2discid internal
1692 # implementations: builtin and abcde.cue2discid. Test
1693 # both of them and decide which one we want to use.
1695 #vecho "Using builtin cue2discid implementation..."
1696 CUESHEET
="$(metaflac $METAFLACOPTS --export-cuesheet-to=- "$CDROM")"
1698 #TRACKS=$(echo $CUESHEET | egrep "TRACK \+[[:digit:]]\+ \+AUDIO" |wc -l)
1700 OFFSETTIMES
=( $
(echo "$CUESHEET" |
sed -n -e's/\ *INDEX 01\ \+//p' ) )
1701 TRACKS
=${#OFFSETTIMES[@]}
1703 #echo "processing offsetimes ${OFFSETTIMES[@]}"
1704 for OFFSETTIME
in ${OFFSETTIMES[@]}; do
1705 OFFSETS
="$OFFSETS $(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))"
1706 #OFFSETS[${#OFFSETS[*]}]=$(( 10#${OFFSETTIME:0:2} * 4500 + 10#${OFFSETTIME:3:2} * 75 + 10#${OFFSETTIME:6:2} ))
1709 LEADOUT
=$
(( $
(echo "$CUESHEET" |
grep lead-out | get_last
) / 44100 * 75 ))
1710 LEADIN
=$
(( $
(echo "$CUESHEET" |
grep lead-in | get_last
) / 44100 * 75 ))
1714 #vecho "Using external python cue2discid implementation..."
1715 TRACKINFO
=$
($METAFLAC $METAFLACOPTS --export-cuesheet-to=- "$CDROM" |
$CUE2DISCID)
1719 log error
"the input flac file does not contain a cuesheet."
1724 # CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1726 # if [ ! "$RET" = "0" ];then
1727 # log warning "something went wrong while querying the CD... Maybe a DATA CD?"
1730 # TRACKS="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
1731 # CDPARANOIAAUDIOTRACKS="$TRACKS"
1733 # LEADOUT="$(echo "$CDPARANOIAOUTPUT" | egrep -o '^TOTAL[[:space:]]+([[:digit:]]+)' | get_last)"
1734 # OFFSETS="$(echo "$CDPARANOIAOUTPUT" | sed -n -e's/^ .* \([0-9]\+\) \[.*/\1/p')"
1738 case "$CDDBMETHOD" in
1739 cddb
) TRACKINFO
=$
($CDDISCID "$CDROM") ;;
1740 # FIXME # musicbrainz needs a cleanup
1741 musicbrainz
) TRACKINFO
=$
($MUSICBRAINZ -c "$CDROM" ) ;;
1745 # Make sure there's a CD in there by checking cd-discid's return code
1746 if [ ! "$?" = "0" ]; then
1747 if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
1748 log error
"cuesheet information from the flac file could not be read."
1749 log error
"Perhaps the flac file does not contain a cuesheet?."
1752 log error
"CD could not be read. Perhaps there's no CD in the drive?"
1756 # In OSX, remount the disc again
1757 if [ "$OSFLAVOUR" = "OSX" ]; then
1758 disktool
-m ${CDROM#/dev/}
1761 DISCID
=$
(echo $TRACKINFO | cut
-f1 -d' ')
1763 TRACKINFO
=$
(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
1766 # Get a full enumeration of tracks, sort it, and put it in the TRACKQUEUE.
1767 # This needs to be done now because a section of the resuming code will need
1770 # get the number of digits to pad TRACKNUM with - we'll use this later
1771 # a CD can only hold 99 tracks, but since we support a feature for starting
1772 # numbering the tracks from a given number, we might need to set it as a
1773 # variable for the user to define... or obtain it somehow.
1774 if [ "$PADTRACKS" = "y" ] ; then
1778 ABCDETEMPDIR
="$WAVOUTPUTDIR/abcde.$(echo $TRACKINFO | cut -f1 -d' ')"
1779 if [ -z "$TRACKQUEUE" ]; then
1780 if [ ! "$STRIPDATATRACKS" = "n" ]; then
1781 case "$CDROMREADERSYNTAX" in
1783 if [ "$WEHAVEACD" = "y" ]; then
1784 vecho
"Querying the CD for audio tracks..."
1785 CDPARANOIAOUTPUT
="$( $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -Q --verbose 2>&1 )"
1787 if [ ! "$RET" = "0" ];then
1788 log warning
"something went wrong while querying the CD... Maybe a DATA CD?"
1790 TRACKS
="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d ".
" | tr '\n' ' ')"
1791 CDPARANOIAAUDIOTRACKS
="$TRACKS"
1793 # Previous versions of abcde would store the tracks on a file, instead of the status record.
1794 if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
1795 echo cdparanoia-audio-tracks
=$
( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
1796 rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
1798 if [ -f "$ABCDETEMPDIR/status" ] && TRACKS
=$
(checkstatus cdparanoia-audio-tracks
); then :; else
1799 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1803 *) TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ') ;;
1806 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1808 if echo "$TRACKS" |
grep "[[:digit:]]" > /dev
/null
2>&1 ;then :;else
1809 log info
"The disc does not contain any tracks. Giving up..."
1812 echo -n "Grabbing entire CD - tracks: "
1813 if [ ! "$PADTRACKS" = "y" ] ; then
1814 TRACKNUMPADDING
=$
(echo -n $TRACKS |
wc -c |
tr -d ' ')
1816 TRACKS
=$
(printf "%0.${TRACKNUMPADDING}d" $TRACKS)
1818 while [ "$X" -ne "$TRACKS" ]
1820 X
=$
(printf "%0.${TRACKNUMPADDING}d" $
(expr $X + 1))
1821 TRACKQUEUE
=$
(echo $TRACKQUEUE $X)
1825 TRACKS
=$
(echo $TRACKINFO | cut
-f2 -d' ')
1826 # User-supplied track queue.
1827 # Weed out non-numbers, whitespace, then sort and weed out duplicates
1828 TRACKQUEUE
=$
(echo $TRACKQUEUE |
sed 's-[^0-9 ]--g' |
tr ' ' '\n' |
grep -v ^$ |
sort -n |
uniq |
tr '\n' ' ' |
sed 's- $--g')
1829 # Once cleaned, obtain the highest value in the trackqueue for number padding
1830 for LASTTRACK
in $TRACKQUEUE; do :; done
1831 if [ ! "$PADTRACKS" = "y" ] ; then
1832 TRACKNUMPADDING
=$
(echo -n $LASTTRACK |
wc -c |
tr -d ' ')
1834 # Now we normalize the trackqueue
1835 for TRACK
in $TRACKQUEUE ; do
1836 TRACKNUM
=$
(printf %0.
${TRACKNUMPADDING}d $
(expr ${TRACK} + 0 ))
1837 PADTRACKQUEUE
=$
(echo $PADTRACKQUEUE $TRACKNUM)
1839 TRACKQUEUE
=$PADTRACKQUEUE
1840 echo Grabbing tracks
: "$TRACKQUEUE"
1843 QUEUEDTRACKS
=$
(echo $TRACKQUEUE |
wc -w |
tr -d ' ')
1845 # We have the discid, create a temp directory after it to store all the temp
1848 if [ -e "$ABCDETEMPDIR" ]; then
1849 echo -n "abcde: attempting to resume from $ABCDETEMPDIR"
1850 # It already exists, see if it's a directory
1851 if [ ! -d "$ABCDETEMPDIR" ]; then
1852 # This is a file/socket/fifo/device/etc, not a directory
1855 echo "abcde: file $ABCDETEMPDIR already exists and does not belong to abcde." >&2
1856 echo "Please investigate, remove it, and rerun abcde." >&2
1860 # It's a directory, let's see if it's owned by us
1861 if [ ! -O "$ABCDETEMPDIR" ]; then
1862 # Nope, complain and exit
1864 echo "abcde: directory $ABCDETEMPDIR already exists and is not owned by you." >&2
1865 echo "Please investigate, remove it, and rerun abcde." >&2
1869 # See if it's populated
1870 if [ ! -f "$ABCDETEMPDIR/discid" ]; then
1871 # Wipe and start fresh
1872 echo "abcde: $ABCDETEMPDIR/discid not found. Abcde must remove and recreate" >&2
1873 echo -n "this directory to continue. Continue? [y/n] (n)" >&2
1874 if [ "$INTERACTIVE" = "y" ]; then
1880 if [ "$ANSWER" != "y" ]; then
1883 rm -rf "$ABCDETEMPDIR" ||
exit 1
1884 mkdir
-p "$ABCDETEMPDIR"
1885 if [ "$?" -gt "0" ]; then
1886 # Directory already exists or could not be created
1887 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1891 # Everything is fine. Check for ^encodetracklocation-
1892 # and encode-output entries in the status file and
1893 # remove them. These are not relevant across sessions.
1894 if [ -f "$ABCDETEMPDIR/status" ]; then
1895 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
1896 grep -v ^encodetracklocation-
< "$ABCDETEMPDIR/status.old" \
1897 |
grep -v ^encode-output
> "$ABCDETEMPDIR/status"
1899 # Remove old error messages
1900 if [ -f "$ABCDETEMPDIR/errors" ]; then
1901 rm -f "$ABCDETEMPDIR/errors"
1905 # We are starting from scratch
1906 mkdir
-p "$ABCDETEMPDIR"
1907 if [ "$?" -gt "0" ]; then
1908 # Directory already exists or could not be created
1909 echo "abcde: Temp directory $ABCDETEMPDIR could not be created." >&2
1912 cat /dev
/null
> "$ABCDETEMPDIR/status"
1913 # Store the abcde version in the status file.
1914 echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
1916 if [ X
"$DOCUE" = "Xy" -a X
"$WEHAVEACD" = "Xy" ]; then
1917 if checkstatus cuefile
> /dev
/null
2>&1 ; then :; else
1918 CUEFILE
=cue-$
(echo "$TRACKINFO" | cut
-f1 -d' ').txt
1919 vecho
"Creating cue file..."
1920 case $CDROMREADERSYNTAX in
1922 if $METAFLAC --export-cuesheet-to=- "$CDROM" > "$ABCDETEMPDIR/$CUEFILE"; then
1923 echo cuefile
=$CUEFILE >> "$ABCDETEMPDIR/status"
1925 log warning
"the input flac file does not contain a cuesheet."
1929 if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
1930 echo cuefile
=$CUEFILE >> "$ABCDETEMPDIR/status"
1932 log warning
"reading the CUE sheet is still considered experimental"
1933 log warning
"and there was a problem with the CD reading. abcde will continue,"
1934 log warning
"but consider reporting the problem to the abcde author"
1940 # If we got the CDPARANOIA status and it is not recorded, save it now
1941 if [ -n "$CDPARANOIAAUDIOTRACKS" ]; then
1942 if checkstatus cdparanoia-audio-tracks
> /dev
/null
2>&1; then :; else
1943 echo cdparanoia-audio-tracks
=$CDPARANOIAAUDIOTRACKS >> "$ABCDETEMPDIR/status"
1947 # Create the discid file
1948 echo "$TRACKINFO" > "$ABCDETEMPDIR/discid"
1949 if checkstatus cddbmethod
> /dev
/null
2>&1 ; then :; else
1950 echo "cddbmethod=$CDDBMETHOD" >> "$ABCDETEMPDIR/status"
1955 # Create a proper CUE file based on the CUE file we created before.
1958 if CUEFILE_IN
="$ABCDETEMPDIR"/$
(checkstatus cuefile
); then
1959 CUEFILE_OUT
=$CUEFILE_IN.out
1960 ### FIXME ### checkstatus cddb
1961 if [ -e "$CDDBDATA" ]; then
1962 vecho
"Adding metadata to the cue file..."
1963 # FIXME It doesn't preserve spaces! Why?
1964 # FIXME parse $track into PERFORMER and TITLE - abcde already has code for this?
1966 echo "PERFORMER \"$DARTIST\"" >> "$CUEFILE_OUT"
1967 echo "TITLE \"$DALBUM\"" >> "$CUEFILE_OUT"
1968 # Set IFS to <newline> to prevent read from swallowing spaces and tabs
1972 cat "$CUEFILE_IN" |
while read line
1974 if echo "$line" |
grep "INDEX 01" > /dev
/null
2>&1 ; then
1975 # FIXME # Possible patch: remove the line above, uncomment the 2 lines below.
1976 # echo "$line" >> "$CUEFILE_OUT"
1977 # if echo "$line" | grep "^[[:space:]]*TRACK" > /dev/null 2>&1 ; then
1978 eval track
="\$TRACK$n"
1980 echo " TITLE \"$track\"" >> "$CUEFILE_OUT"
1982 # FIXME # If the lines above are uncommented, remove the line below.
1983 echo "$line" >> "$CUEFILE_OUT"
1986 mv "$CUEFILE_OUT" "$CUEFILE_IN"
1987 echo "cleancuefile" >> "$ABCDETEMPDIR/status"
1993 # Parses a CDDB file and outputs the title and the track names.
1994 # Variables: CDDBFILE
1998 # List out disc title/author and contents
1999 if [ "$ONETRACK" = "y" ]; then
2000 vecho
"ONETRACK mode selected: displaying only the title of the CD..."
2002 echo "---- $(grep DTITLE "${CDDBPARSEFILE}" | cut '-d=' -f2- | tr -d \\r\\n ) ----"
2003 if [ X
"$SHOWCDDBYEAR" = "Xy" ]; then
2004 PARSEDYEAR
=$
(grep DYEAR
"${CDDBPARSEFILE}" | cut
'-d=' -f2-)
2005 if [ ! X
"$PARSEDYEAR" = "X" ]; then
2006 echo "Year: $PARSEDYEAR"
2009 if [ X
"$SHOWCDDBGENRE" = "Xy" ]; then
2010 PARSEDGENRE
=$
(grep DGENRE
"${CDDBPARSEFILE}" | cut
'-d=' -f2-)
2011 if [ ! X
"$PARSEDGENRE" = "X" ]; then
2012 echo "Genre: $PARSEDGENRE"
2015 if [ ! "$ONETRACK" = "y" ]; then
2016 for TRACK
in $
(f_seq_row
1 $TRACKS)
2018 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "${CDDBPARSEFILE}" | cut -f2- -d= | tr -d \\r\\n)"
2024 # Check for a local CDDB file, and report success
2027 if checkstatus cddb-readcomplete
&& checkstatus cddb-choice
>/dev
/null
; then :; else
2029 CDDBLOCALSTATUS
="notfound"
2030 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
2033 if [ "$CDDBLOCALRECURSIVE" = "y" ]; then
2034 CDDBLOCALRESULTS
="$(find ${CDDBLOCALDIR} -name "${CDDBDISCID}" -type f 2> /dev/null)"
2035 if [ ! "${CDDBLOCALRESULTS}" = "" ]; then
2036 if (( $
(echo "${CDDBLOCALRESULTS}" |
wc -l) == 1 )); then
2037 CDDBLOCALFILE
="${CDDBLOCALRESULTS}"
2038 CDDBLOCALMATCH
=single
2039 elif (( $
(echo "${CDDBLOCALRESULTS}" |
wc -l) > 1 )); then
2040 CDDBLOCALMATCH
=multiple
2045 elif [ "$CDDBLOCALMATCH" = "none" ] && [ -r "${CDDBLOCALDIR}/${CDDBDISCID}" ]; then
2046 CDDBLOCALFILE
="${CDDBLOCALDIR}/${CDDBDISCID}"
2047 CDDBLOCALMATCH
=single
2052 # If the user has selected to check a local CDDB repo, we proceed with it
2053 case $CDDBLOCALMATCH in
2055 echo "Processing multiple matching CDDB entries..." > "$ABCDETEMPDIR/cddblocalchoices"
2057 echo "$CDDBLOCALRESULTS" |
while read RESULT
; do
2059 # List out disc title/author and contents
2060 CDDBLOCALREAD
="$ABCDETEMPDIR/cddblocalread.$X"
2061 cat "$RESULT" > "${CDDBLOCALREAD}"
2064 do_cddbparse
"${CDDBLOCALREAD}"
2066 ##FIXME## QUICK HACK !!!!
2067 if [ ! "$INTERACTIVE" = "y" ]; then break ; fi
2068 } >> "$ABCDETEMPDIR/cddblocalchoices"
2070 if [ $
(cat "$ABCDETEMPDIR/cddblocalchoices" |
wc -l) -ge 24 ] && [ "$INTERACTIVE" = "y" ]; then
2071 page
"$ABCDETEMPDIR/cddblocalchoices"
2073 # It's all going to fit in one page, cat it
2074 cat "$ABCDETEMPDIR/cddblocalchoices" >&2
2076 CDDBLOCALCHOICES
=$
( echo "$CDDBLOCALRESULTS" |
wc -l )
2077 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2078 CDDBLOCALCHOICENUM
=-1
2079 if [ "$INTERACTIVE" = "y" ]; then
2080 while [ $CDDBLOCALCHOICENUM -lt 0 ] ||
[ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; do
2081 echo -n "Locally cached CDDB entries found. Which one would you like to use (0 for none)? [0-$CDDBLOCALCHOICES]: " >&2
2082 read CDDBLOCALCHOICE
2083 [ x
"$CDDBLOCALCHOICE" = "x" ] && CDDBLOCALCHOICE
="1"
2084 # FIXME # Introduce diff's
2085 if echo $CDDBLOCALCHOICE |
egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2086 diffentries cddblocalread
"$CDDBLOCALCHOICES" "$CDDBLOCALCHOICE"
2087 elif echo $CDDBLOCALCHOICE |
egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2088 # Make sure we get a valid choice
2089 CDDBLOCALCHOICENUM
=$
(echo $CDDBLOCALCHOICE |
xargs printf %d
2>/dev
/null
)
2090 if [ $CDDBLOCALCHOICENUM -lt 0 ] ||
[ $CDDBLOCALCHOICENUM -gt $CDDBLOCALCHOICES ]; then
2091 echo "Invalid selection. Please choose a number between 0 and $CDDBLOCALCHOICES." >&2
2097 #echo "Selected ..."
2099 CDDBLOCALCHOICENUM
=1
2101 if [ ! "$CDDBLOCALCHOICENUM" = "0" ]; then
2102 #echo "Using local copy of CDDB data"
2103 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2104 cat "$ABCDETEMPDIR/cddblocalread.$CDDBLOCALCHOICENUM" >> "$ABCDETEMPDIR/cddbread.1"
2105 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2106 echo cddb-readcomplete
>> "$ABCDETEMPDIR/status"
2107 do_cddbparse
"$ABCDETEMPDIR/cddbread.1" > "$ABCDETEMPDIR/cddbchoices"
2108 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2109 CDDBLOCALSTATUS
="found"
2111 #echo "Not using local copy of CDDB data"
2112 CDDBLOCALSTATUS
="notfound"
2116 # List out disc title/author and contents
2117 do_cddbparse
"${CDDBLOCALFILE}"
2118 #if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
2119 # echo -n "Embedded cuesheet entry found, use it? [y/n] (y): " >&2
2121 echo -n "Locally cached CDDB entry found, use it? [y/n] (y): " >&2
2123 if [ "$INTERACTIVE" = "y" ]; then
2125 while [ "$USELOCALRESP" != "y" ] && [ "$USELOCALRESP" != "n" ] && [ "$USELOCALRESP" != "" ] ; do
2126 echo -n 'Invalid selection. Please answer "y" or "n": ' >&2
2129 [ x
"$USELOCALRESP" = "x" ] && USELOCALRESP
="y"
2133 if [ "$USELOCALRESP" = "y" ]; then
2134 #echo "Using local copy of CDDB data"
2135 echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
2136 cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
2137 echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
2138 echo cddb-readcomplete
>> "$ABCDETEMPDIR/status"
2139 do_cddbparse
"${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
2140 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2141 CDDBLOCALSTATUS
="single"
2143 #echo "Not using local copy of CDDB data"
2144 CDDBLOCALSTATUS
="notfound"
2148 CDDBLOCALSTATUS
="notfound"
2154 do_musicbrainzstat
()
2161 # Use MBE_TOCGetCDIndexId on a perl query
2168 # Perform CDDB protocol version check if it hasn't already been done
2169 if checkstatus cddb-statcomplete
; then :; else
2170 if [ "$CDDBAVAIL" = "n" ]; then
2172 echo 503 > "$ABCDETEMPDIR/cddbstat"
2175 CDDBUSER
=$
(echo $HELLOINFO | cut
-f1 -d'@')
2176 CDDBHOST
=$
(echo $HELLOINFO | cut
-f2- -d'@')
2177 while test $rc -eq 1 -a $CDDBPROTO -ge 3; do
2178 vecho
"Checking CDDB server status..."
2179 $CDDBTOOL stat
$CDDBURL $CDDBUSER $CDDBHOST $CDDBPROTO > "$ABCDETEMPDIR/cddbstat"
2180 RESPONSECODE
=$
(head -n 1 "$ABCDETEMPDIR/cddbstat" | cut
-f1 -d' ')
2181 case "$RESPONSECODE" in
2182 210) # 210 OK, status information follows (until terminating `.')
2185 501|
*) # 501 Illegal CDDB protocol level: <n>.
2186 CDDBPROTO
=`expr $CDDBPROTO - 1`
2190 if test $rc -eq 1; then
2194 echo cddb-statcomplete
>> "$ABCDETEMPDIR/status"
2202 CDDBDISCID
=$
(echo $TRACKINFO | cut
-d' ' -f1)
2203 CDDBLOCALFILE
="${CDDBLOCALDIR}/${CDDBDISCID}"
2205 # Perform CDDB query if it hasn't already been done
2206 if checkstatus cddb-querycomplete
; then :; else
2207 if [ "$CDDBAVAIL" = "n" ]; then
2209 echo 503 > "$ABCDETEMPDIR/cddbquery"
2210 # The default CDDBLOCALSTATUS is "notfound"
2211 # This part will be triggered if the user CDDB repo does not
2212 # contain the entry, or if we are not trying to use the repo.
2214 vecho
"Querying the CDDB server..."
2215 CDDBUSER
=$
(echo $HELLOINFO | cut
-f1 -d'@')
2216 CDDBHOST
=$
(echo $HELLOINFO | cut
-f2- -d'@')
2217 $CDDBTOOL query
$CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $TRACKINFO > "$ABCDETEMPDIR/cddbquery"
2223 # no match found in database,
2224 # wget/fetch error, or user requested not to use CDDB
2225 # Make up an error code (503) that abcde
2226 # will recognize in do_cddbread
2227 # and compensate by making a template
2228 echo 503 > "$ABCDETEMPDIR/cddbquery"
2230 *) # strange and unknown error
2231 echo ERRORCODE
=$ERRORCODE
2232 echo "abcde: $CDDBTOOL returned unknown error code"
2236 echo cddb-querycomplete
>> "$ABCDETEMPDIR/status"
2243 # If it's not to be used, generate a template.
2244 # Then, display it (or them) and let the user choose/edit it
2245 if checkstatus cddb-readcomplete
; then :; else
2246 vecho
"Obtaining CDDB results..."
2247 # If CDDB is to be used, interpret the query results and read all
2248 # the available entries.
2249 rm -f "$ABCDETEMPDIR/cddbchoices"
2250 CDDBCHOICES
=1 # Overridden by multiple matches
2251 RESPONSECODE
=$
(head -n 1 "$ABCDETEMPDIR/cddbquery" | cut
-f1 -d' ')
2252 case "$RESPONSECODE" in
2254 # One exact match, retrieve it
2255 # 200 [section] [discid] [artist] / [title]
2256 if checkstatus cddb-read-1-complete
; then :; else
2257 echo -n "Retrieving 1 CDDB match..." >> "$ABCDETEMPDIR/cddbchoices"
2258 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $
(cut
-f2,3 -d' ' "$ABCDETEMPDIR/cddbquery") > "$ABCDETEMPDIR/cddbread.1"
2259 echo "done." >> "$ABCDETEMPDIR/cddbchoices"
2260 echo cddb-read-1-complete
>> "$ABCDETEMPDIR/status"
2261 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2263 # List out disc title/author and contents
2264 echo ---- "$(cut '-d ' -f4- "$ABCDETEMPDIR/cddbquery
")" ---- >> "$ABCDETEMPDIR/cddbchoices"
2265 for TRACK
in $
(f_seq_row
1 $TRACKS)
2267 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2269 echo >> "$ABCDETEMPDIR/cddbchoices"
2273 case "$RESPONSECODE" in
2274 202) echo "No CDDB match." >> "$ABCDETEMPDIR/cddbchoices" ;;
2275 403|
409) echo "CDDB entry is corrupt, or the handshake failed." >> "$ABCDETEMPDIR/cddbchoices" ;;
2276 503) echo "CDDB unavailable." >> "$ABCDETEMPDIR/cddbchoices" ;;
2278 $CDDBTOOL template $
(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2279 # List out disc title/author and contents of template
2280 echo ---- Unknown Artist
/ Unknown Album
---- >> "$ABCDETEMPDIR/cddbchoices"
2282 for TRACK
in $
(f_seq_row
1 $TRACKS)
2284 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.0" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2286 echo >> "$ABCDETEMPDIR/cddbchoices"
2287 echo cddb-read-0-complete
>> "$ABCDETEMPDIR/status"
2288 echo cddb-choice
=0 >> "$ABCDETEMPDIR/status"
2291 # Multiple exact, (possibly multiple) inexact matches
2293 if [ "$RESPONSECODE" = "211" ]; then IN
=in; fi
2294 if [ "$(wc -l < "$ABCDETEMPDIR/cddbquery
" | tr -d ' ')" -eq 3 ]; then
2295 echo "One ${IN}exact match:" >> "$ABCDETEMPDIR/cddbchoices"
2296 tail -n +2 "$ABCDETEMPDIR/cddbquery" |
head -n 1 >> "$ABCDETEMPDIR/cddbchoices"
2297 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2299 echo "Multiple ${IN}exact matches:" >> "$ABCDETEMPDIR/cddbchoices"
2301 vecho
-n "Retrieving multiple matches... "
2302 grep -v ^
[.
]$
"$ABCDETEMPDIR/cddbquery" |
( X
=0
2303 read DISCINFO
# eat top line
2307 if checkstatus cddb-read-
$X-complete; then :; else
2308 $CDDBTOOL read $CDDBURL $CDDBPROTO $CDDBUSER $CDDBHOST $
(echo $DISCINFO | cut
-f1,2 -d' ') > "$ABCDETEMPDIR/cddbread.$X"
2309 echo cddb-read-
$X-complete >> "$ABCDETEMPDIR/status"
2311 # List out disc title/author and contents
2312 echo \
#$X: ---- "$DISCINFO" ---- >> "$ABCDETEMPDIR/cddbchoices"
2313 for TRACK
in $
(f_seq_row
1 $TRACKS)
2315 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread.
$X" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2317 echo >> "$ABCDETEMPDIR/cddbchoices"
2320 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2324 for TRACK
in $
(f_seq_row
1 $TRACKS)
2326 echo $TRACK: "$(grep ^TTITLE$(expr $TRACK - 1)= "$ABCDETEMPDIR/cddbread
.1" | cut -f2- -d= | tr -d \\r\\n)" >> "$ABCDETEMPDIR/cddbchoices"
2328 echo >> "$ABCDETEMPDIR/cddbchoices"
2329 echo cddb-read-1-complete
>> "$ABCDETEMPDIR/status"
2330 echo cddb-choice
=1 >> "$ABCDETEMPDIR/status"
2333 echo "cddb-readcomplete" >> "$ABCDETEMPDIR/status"
2340 if checkstatus cddb-edit
>/dev
/null
; then
2341 CDDBDATA
="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2342 VARIOUSARTISTS
="$(checkstatus variousartists)"
2343 VARIOUSARTISTSTYLE
="$(checkstatus variousartiststyle)"
2346 if [ "$INTERACTIVE" = "y" ]; then
2347 # We should show the CDDB results both when we are not using the local CDDB repo
2348 # or when we are using it but we could not find a proper match
2349 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] ||
[ ! "$CDDBUSELOCAL" = "y" ]; then
2350 # Display the $ABCDETEMPDIR/cddbchoices file created above
2351 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2352 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2353 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2354 CHOICE
=$
(checkstatus cddb-choice
)
2355 if [ -n "$CHOICE" ] ; then
2356 case $CDDBCHOICES in
2357 -1) if head -1 "$ABCDETEMPDIR/cddbquery" |
grep "^$" > /dev
/null
2>&1 ; then
2358 log error
"CDDB query failed!"
2361 cat "$ABCDETEMPDIR/cddbchoices"
2364 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2366 echo "Selected: #$CHOICE"
2367 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CHOICE"
2371 # The user has a choice to make, display the info in a pager if necessary
2372 if [ $
(cat "$ABCDETEMPDIR/cddbchoices" |
wc -l) -ge 24 ]; then
2373 page
"$ABCDETEMPDIR/cddbchoices"
2375 # It's all going to fit in one page, cat it
2376 cat "$ABCDETEMPDIR/cddbchoices" >&2
2380 # Setting the choice to an impossible integer to avoid errors in the numeric comparisons
2382 # I'll take CDDB read #3 for $400, Alex
2383 while [ $CDCHOICENUM -lt 0 ] ||
[ $CDCHOICENUM -gt $CDDBCHOICES ]; do
2384 echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
2386 [ X
"$CDDBCHOICE" = "X" ] && CDDBCHOICE
=1
2387 if echo $CDDBCHOICE |
egrep "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2388 if [ ! X
"$DIFF" = "X" ]; then
2389 PARSECHOICE1
=$
(echo $CDDBCHOICE | cut
-d"," -f1 |
xargs printf %d
2>/dev
/null
)
2390 PARSECHOICE2
=$
(echo $CDDBCHOICE | cut
-d"," -f2 |
xargs printf %d
2>/dev
/null
)
2391 if [ $PARSECHOICE1 -lt 1 ] ||
[ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
2392 [ $PARSECHOICE2 -lt 1 ] ||
[ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
2393 [ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
2394 echo "Invalid diff range. Please select two coma-separated numbers between 1 and $CDDBCHOICES" >&2
2396 # We parse the 2 choices to diff, store them in temporary files and diff them.
2397 for PARSECHOICE
in $
(echo $CDDBCHOICE |
tr , \
); do
2398 do_cddbparse
"$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
2400 echo "Showing diff between choices $PARSECHOICE1 and $PARSECHOICE2..." > "$ABCDETEMPDIR/cddbread.diff"
2401 $DIFF $DIFFOPTS "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE1" "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE2" >> "$ABCDETEMPDIR/cddbread.diff"
2402 if [ $
(cat "$ABCDETEMPDIR/cddbread.diff" |
wc -l) -ge 24 ]; then
2403 page
"$ABCDETEMPDIR/cddbread.diff"
2405 cat "$ABCDETEMPDIR/cddbread.diff" >&2
2409 echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
2411 elif echo $CDDBCHOICE |
egrep "[[:space:]]*[[:digit:]]+[[:space:]]*" > /dev
/null
2>&1 ; then
2412 # Make sure we get a valid choice
2413 CDCHOICENUM
=$
(echo $CDDBCHOICE |
xargs printf %d
2>/dev
/null
)
2414 if [ $CDCHOICENUM -lt 0 ] ||
[ $CDCHOICENUM -gt $CDDBCHOICES ]; then
2415 echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
2419 if [ "$CDCHOICENUM" = "0" ]; then
2420 vecho
"Creating empty CDDB template..."
2422 $CDDBTOOL template $
(cat "$ABCDETEMPDIR/discid") > "$ABCDETEMPDIR/cddbread.0"
2424 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.
$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2425 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CDCHOICENUM"
2427 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2431 # We need some code to show the selected option when local repository is selected and we have found a match
2432 vecho
"Using cached CDDB match..." >&2
2433 # Display the $ABCDETEMPDIR/cddbchoices file created above
2434 # Pick a pager so that if the tracks overflow the screen the user can still view everything
2435 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2436 CDDBCHOICES
=$
(expr $
(cat "$ABCDETEMPDIR/cddbquery" |
wc -l) - 2)
2437 CHOICE
=$
(checkstatus cddb-choice
)
2438 if [ "$USELOCALRESP" = "y" ]; then :; else
2439 if [ -n "$CHOICE" ] ; then
2440 case $CDDBCHOICES in
2443 echo "Selected template."
2445 1) cat "$ABCDETEMPDIR/cddbchoices" ;;
2447 echo "Selected: #$CHOICE"
2448 do_cddbparse
"$ABCDETEMPDIR/cddbread.$CHOICE"
2456 # We're noninteractive - pick the first choice.
2457 # But in case we run a previous instance and selected a choice, use it.
2458 if [ -r "$ABCDETEMPDIR/cddbchoices" ]; then
2459 # Show the choice if we are not using the locally stored one
2460 # or when the local search failed to find a match.
2461 PREVIOUSCHOICE
=$
(checkstatus cddb-choice
)
2462 if [ "$CDDBUSELOCAL" = "y" ] && [ "$CDDBLOCALSTATUS" = "notfound" ] ||
[ ! "$CDDBUSELOCAL" = "y" ]; then
2463 #if [ "$PREVIOUSCHOICE" ]; then
2464 cat "$ABCDETEMPDIR/cddbchoices"
2467 if [ ! -z "$PREVIOUSCHOICE" ] ; then
2468 CDCHOICENUM
=$PREVIOUSCHOICE
2471 echo "cddb-choice=$CDCHOICENUM" >> "$ABCDETEMPDIR/status"
2473 echo "Selected: #$CDCHOICENUM ($(grep ^DTITLE= "$ABCDETEMPDIR/cddbread.
$CDCHOICENUM" | cut -f2- -d= | tr -d \\r\\n))" >&2
2478 if checkstatus cddb-choice
>/dev
/null
; then :; else
2479 echo "abcde: internal error: cddb-choice not recorded." >&2
2482 CDDBDATA
="$ABCDETEMPDIR/cddbread.$(checkstatus cddb-choice)"
2483 echo -n "Edit selected CDDB data? [y/n] (" >&2
2484 if [ "$INTERACTIVE" = "y" ]; then
2485 if [ "$UNKNOWNDISK" = "y" ]; then
2488 [ "$EDITCDDB" != "n" ] && EDITCDDB
=y
2497 if [ "$EDITCDDB" = "y" ]; then
2498 CDDBDATAMD5SUM
=$
($MD5SUM "$CDDBDATA" | cut
-d " " -f 1);
2500 # Use the debian sensible-editor wrapper to pick the editor that the
2501 # user has requested via their $EDITOR environment variable
2502 if [ -x "/usr/bin/sensible-editor" ]; then
2503 /usr
/bin
/sensible-editor
"$CDDBDATA"
2504 elif [ -n "$EDITOR" ]; then
2505 if [ -x $
(which "${EDITOR%%\ *}") ]; then
2506 # That failed, try to load the preferred editor, starting
2507 # with their EDITOR variable
2508 eval $
(echo "$EDITOR") \"$CDDBDATA\"
2510 # If that fails, check for a vi
2511 elif which vi
>/dev
/null
2>&1; then
2513 elif [ -x /usr
/bin
/vim
]; then
2514 /usr
/bin
/vim
"$CDDBDATA"
2515 elif [ -x /usr
/bin
/vi
]; then
2516 /usr
/bin
/vi
"$CDDBDATA"
2517 elif [ -x /bin
/vi
]; then
2519 # nano should be on all (modern, i.e., sarge) debian systems
2520 elif which nano
>/dev
/null
2>&1 ; then
2522 elif [ -x /usr
/bin
/nano
]; then
2523 /usr
/bin
/nano
"$CDDBDATA"
2524 # mg should be on all OpenBSD systems
2525 elif which mg
>/dev
/null
2>&1 ; then
2527 elif [ -x /usr
/bin
/mg
]; then
2528 /usr
/bin
/mg
"$CDDBDATA"
2531 log warning
"no editor available. Check your EDITOR environment variable."
2533 # delete editor backup file if it exists
2534 if [ -w "$CDDBDATA~" ]; then
2539 # Some heuristics first. Look at Disc Title, and if it starts with
2540 # "Various", then we'll assume Various Artists
2541 if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
2542 echo "Looks like a Multi-Artist CD" >&2
2545 echo -n "Is the CD multi-artist? [y/n] (n): " >&2
2546 if [ "$INTERACTIVE" = "y" ]; then
2553 if [ "$VARIOUSARTISTS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
2556 # Need NUMTRACKS before cddb-tool will return it:
2557 NUMTRACKS
=$
(egrep '^TTITLE[0-9]+=' "$CDDBDATA" |
wc -l)
2558 if [ "$(grep -c "^TTITLE.
*\
/" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2559 # More than 1/2 tracks contain a "/", so guess forward
2561 elif [ "$(grep -c "^TTITLE.
*\
-" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2562 # More than 1/2 contain a "-", so guess forward-dash
2564 elif [ "$(grep -c "^TTITLE.
*(.
*)" "$CDDBDATA")" -gt "$(expr $NUMTRACKS / 2 )" ]; then
2565 # More than 1/2 contain something in parens, so guess trailing-paren
2569 echo "1) Artist / Title" >&2
2570 echo "2) Artist - Title" >&2
2571 echo "3) Title / Artist" >&2
2572 echo "4) Title - Artist" >&2
2573 echo "5) Artist: Title" >&2
2574 echo "6) Title (Artist)" >&2
2575 echo "7) This is a single-artist CD" >&2
2576 echo -n "Which style of multiple artist entries is it? [1-7] ($DEFAULTSTYLE): " >&2
2577 if [ "$INTERACTIVE" = "y" ]; then
2578 read VARIOUSARTISTSTYLE
2580 echo $DEFAULTSTYLE >&2
2581 VARIOUSARTISTSTYLE
=$DEFAULTSTYLE
2583 VARIOUSARTISTSTYLE
=$
(echo 0$VARIOUSARTISTSTYLE |
xargs printf %d
)
2584 # If they press Enter, then the default style (0) was chosen
2585 while [ $VARIOUSARTISTSTYLE -lt 0 ] ||
[ $VARIOUSARTISTSTYLE -gt 7 ]; do
2586 echo "Invalid selection. Please choose a number between 1 and 7."
2587 echo -n "Selection [1-7]: "
2588 read VARIOUSARTISTSTYLE
2589 VARIOUSARTISTSTYLE
=$
(echo 0$VARIOUSARTISTSTYLE |
xargs printf %d
)
2591 if [ "$VARIOUSARTISTSTYLE" = "0" ]; then
2592 VARIOUSARTISTSTYLE
=$DEFAULTSTYLE
2594 vecho
"Selected: $VARIOUSARTISTSTYLE"
2595 case "$VARIOUSARTISTSTYLE" in
2597 VARIOUSARTISTSTYLE
=forward
2600 VARIOUSARTISTSTYLE
=forward-dash
2603 VARIOUSARTISTSTYLE
=reverse
2606 VARIOUSARTISTSTYLE
=reverse-dash
2609 VARIOUSARTISTSTYLE
=colon
2612 VARIOUSARTISTSTYLE
=trailing-paren
2620 echo "variousartists=$VARIOUSARTISTS" >> "$ABCDETEMPDIR/status"
2621 echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
2623 if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
2624 if [ "$CDDBDATAMD5SUM" != "" ] && [ "$CDDBDATAMD5SUM" != "$($MD5SUM "$CDDBDATA" | cut -d " " -f 1)" ]; then
2625 # This works but does not have the necessary error checking
2626 # yet. If you are familiar with the CDDB spec
2627 # (see http://www.freedb.org/src/latest/DBFORMAT)
2628 # and can create an error-free entry on your own, then put
2629 # UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE=y in your
2630 # abcde.conf to enable it. Put CDDBSUBMIT=email@address in
2631 # your abcde.conf to change the email address submissions are
2634 # submit the modified file, if they want
2635 if [ "$NOSUBMIT" != "y" ]; then
2636 echo -n "Do you want to submit this entry to $CDDBSUBMIT? [y/n] (n): "
2638 while [ "$YESNO" != "y" ] && [ "$YESNO" != "n" ] && [ "$YESNO" != "Y" ] && \
2639 [ "$YESNO" != "N" ] && [ "$YESNO" != "" ]
2641 echo -n 'Invalid selection. Please answer "y" or "n": '
2644 if [ "$YESNO" = "y" ] ||
[ "$YESNO" = "Y" ]; then
2645 echo -n "Sending..."
2646 $CDDBTOOL send
"$CDDBDATA" $CDDBSUBMIT
2653 # User CDDBLOCALPOLICY to find out if we store the file or not...
2654 # Cache edited CDDB entry in the user's cddb dir
2655 if [ "$CDDBCOPYLOCAL" = "y" ]; then
2656 # Make sure the cache directory exists
2657 mkdir
-p $CDDBLOCALDIR
2658 cat "$CDDBDATA" |
tail -n $
(expr $
(cat "$CDDBDATA" |
wc -l ) - 1 ) > ${CDDBLOCALDIR}/$
(echo "$TRACKINFO" | cut
-d' ' -f1)
2661 echo "cddb-edit" >> "$ABCDETEMPDIR/status"
2664 # do_cdread [tracknumber]
2665 # do_cdread onetrack [firsttrack] [lasttrack]
2669 # The commands here don't go through run_command because they're never supposed to be silenced
2670 # return codes need to be doublechecked anyway, however
2671 if [ "$1" = "onetrack" ]; then
2672 # FIXME # Add the possibility of grabbing ranges of tracks in onetrack
2673 # FIXME # Until then, we grab the whole CD in one track, no matter what
2675 # We need the first and last track for cdda2wav
2677 LASTTRACK
=$
(expr $3 + 0)
2678 UTRACKNUM
=$FIRSTTRACK
2679 case "$CDROMREADERSYNTAX" in
2680 flac
) READTRACKNUMS
="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
2683 # Add a variable to check if tracks are provided in command line and if not, use "0-" to rip the tracks
2684 READTRACKNUMS
="$FIRSTTRACK-$LASTTRACK" ;;
2685 cdda2wav
) READTRACKNUMS
="$FIRSTTRACK+$LASTTRACK" ;;
2686 *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
2692 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
2693 if [ "$USEPIPES" = "y" ]; then
2694 TEMPARG
="PIPERIPPER_$CDROMREADERSYNTAX"
2695 FILEARG
="$( eval echo "\$
$TEMPARG" )"
2697 PIPE_MESSAGE
="and encoding "
2699 WAVDATA
="$ABCDETEMPDIR/track$UTRACKNUM.wav"
2700 case "$CDROMREADERSYNTAX" in
2701 ## FIXME ## Find the cases for dagrab and flac, to avoid exceptions
2703 FILEARG
="--output-name=$WAVDATA"
2706 FILEARG
="-f $WAVDATA"
2714 if [ "$1" = "onetrack" ]; then
2715 echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
2717 if [ -r "$CDDBDATA" ]; then
2718 getcddbinfo TRACKNAME
2719 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
2721 echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM..." >&2
2724 case "$CDROMREADERSYNTAX" in
2725 ### FIXME ### use an exception for flac, since it uses -o
2726 ### FIXME ### Shall we just use -o $FILEARG ??
2728 # Avoid problems wit math expressions by unpadding the given UTRACKNUM
2729 STRIPTRACKNUM
=$
(expr $UTRACKNUM + 0)
2730 nice
$READNICE $FLAC -d -f --cue=${READTRACKNUMS:-$STRIPTRACKNUM.1-$(($STRIPTRACKNUM + 1)).0} "$FILEARG" "$CDROM" ;;
2732 nice
$READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" $REDIR ;;
2734 if [ "$OSFLAVOUR" = "OSX" ] ; then
2735 # Hei, we have to unmount the device before running anything like cdda2wav in OSX
2736 disktool
-u ${CDROM#/dev/} 0
2737 # Also, in OSX the cdrom device for cdda2wav changes...
2738 CDDA2WAVCDROM
="IODVDServices"
2739 elif [ "$OSFLAVOUR" = "FBSD" ] ; then
2740 CDDA2WAVCDROM
="$CDROMID"
2742 if [ "$CDROMID" = "" ]; then
2743 CDDA2WAVCDROM
="$CDROM"
2745 CDDA2WAVCDROM
="$CDROMID"
2748 nice
$READNICE $CDROMREADER -D $CDDA2WAVCDROM -t ${READTRACKNUMS:-$UTRACKNUM} "$FILEARG" $REDIR
2750 ## FIXME ## We have an exception for dagrab, since it uses -f
2751 ## FIXME ## Shall we just use -f $FILEARG ??
2752 dagrab
) nice
$READNICE $CDROMREADER -d "$CDROM" -v $UTRACKNUM "$FILEARG" $REDIR
2755 # Find the track's mounted path
2756 REALTRACKNUM
=$
(expr $UTRACKNUM + 0)
2757 FILEPATH
=$
(mount |
grep "$CDROM on" |
sed 's/^[^ ]* on \(.*\) (.*/\1/')
2758 FILEPATH
=$
(find "$FILEPATH" |
grep "/$REALTRACKNUM ");
2759 # If the file exists, copy it
2760 if [ -e "$FILEPATH" ] ; then
2761 nice
$READNICE $CDROMREADER "$FILEPATH" "$FILEARG" $REDIR
2765 debug
) nice
$READNICE $CDROMREADER -$CDPARANOIACDROMBUS "$CDROM" -w $UTRACKNUM-[:1] "$FILEARG" $REDIR
2769 # If we get some error or we get some missing wav
2770 # (as long as we dont use pipes)
2771 if [ "$RETURN" != "0" -o \
( ! -s "$WAVDATA" -a X
"$USEPIPES" != "Xy" \
) ]; then
2772 # Thank goodness errors is only machine-parseable up to the
2773 # first colon, otherwise this woulda sucked
2774 if [ "$RETURN" = "0" -a ! -s "$WAVDATA" ]; then
2775 RETURN
=73 # fake a return code as cdparanoia return 0 also on aborted reads
2777 if [ "$USEPIPES" = "y" ]; then
2778 echo "readencodetrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2780 echo "readtrack-$UTRACKNUM: $CDROMREADER returned code $RETURN" >> "$ABCDETEMPDIR/errors"
2784 if [ "$USEPIPES" = "y" ]; then
2785 echo readencodetrack-
$UTRACKNUM >> "$ABCDETEMPDIR/status"
2787 echo readtrack-
$UTRACKNUM >> "$ABCDETEMPDIR/status"
2789 if [ "$1" = "onetrack" ]; then
2790 echo onetrack
>> "$ABCDETEMPDIR/status"
2796 # No values accepted, only uses env variables
2799 if "$CDSPEED" "$CDSPEEDOPTS" "$CDSPEEDVALUE" >/dev
/null
; then
2800 vecho
"Setting CD speed to ${CDSPEEDVALUE}x"
2802 echo "abcde: unable to set the device speed" >&2
2808 # vecho outputs a message if EXTRAVERBOSE is selected
2811 if [ x
"$EXTRAVERBOSE" != "x" ]; then
2813 warning
) shift ; log warning
"$@" ;;
2821 # decho outputs a debug message if DEBUG is selected
2824 if [ x
"$DEBUG" != "x" ]; then
2825 if echo $1 |
grep "^\[" > /dev
/null
2>&1 ; then
2826 DEBUGECHO
=$
(echo "$@" |
tr -d '[]')
2827 echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
2834 # User-redefinable functions
2835 # Custom filename munging:
2838 #echo "$@" | sed s,:,\ -,g | tr \ /\* __+ | tr -d \'\"\?\[:cntrl:\]
2839 echo "$@" |
sed s
,:,\
-,g |
tr \
/ __ |
tr -d \'\"\?\
[:cntrl
:\
]
2842 # Custom genre munging:
2845 echo $CDGENRE |
tr "[:upper:]" "[:lower:]"
2849 # Empty pre_read function, to be defined in the configuration file.
2856 # Empty post_read function, to be defined in the configuration file.
2862 ###############################################################################
2865 # Start of execution
2866 ###############################################################################
2871 # Defaults to FreeDB, but a python musicbrainz can be used
2873 CDDBURL
="http://freedb.freedb.org/~cddb/cddb.cgi"
2874 CDDBSUBMIT
=freedb-submit@freedb.org
2876 HELLOINFO
="$(whoami)@$(hostname)"
2878 CDDBLOCALPOLICY
="always"
2879 CDDBLOCALRECURSIVE
="y"
2880 CDDBLOCALDIR
="$HOME/.cddb"
2883 # List of fields we parse and show during the CDDB parsing...
2884 SHOWCDDBFIELDS
="year,genre"
2887 #CDROMREADERSYNTAX=cdparanoia
2888 ENCODERSYNTAX
=default
2890 MP3ENCODERSYNTAX
=default
2891 OGGENCODERSYNTAX
=default
2892 FLACENCODERSYNTAX
=default
2893 SPEEXENCODERSYNTAX
=default
2894 MPPENCODERSYNTAX
=default
2895 AACENCODERSYNTAX
=default
2896 NORMALIZERSYNTAX
=default
2897 CUEREADERSYNTAX
=default
2899 OUTPUTFORMAT
='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
2900 # Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
2901 #VAOUTPUTFORMAT=${OUTPUTFORMAT}
2902 VAOUTPUTFORMAT
='Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
2903 ONETRACKOUTPUTFORMAT
='${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
2904 VAONETRACKOUTPUTFORMAT
='Various-${ALBUMFILE}/${ALBUMFILE}'
2905 PLAYLISTFORMAT
='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2906 PLAYLISTDATAPREFIX
=''
2907 VAPLAYLISTFORMAT
='${ARTISTFILE}-${ALBUMFILE}.${OUTPUT}.m3u'
2908 VAPLAYLISTDATAPREFIX
=''
2916 VARIOUSARTISTSTYLE
=forward
2923 # If using scsi devices, cdda2wav needs a CDROMID, instead of a device node
2924 # i.e. CDROMID="1,0,0"
2926 # If we are using the IDE bus, we need CDPARANOIACDROMBUS defined as "d"
2927 # If we are using the ide-scsi emulation layer, we need to define a "g"
2928 CDPARANOIACDROMBUS
="d"
2930 # program paths - defaults to checking your $PATH
2937 XINGMP3ENC
=xingmp3enc
2954 CDPARANOIA
=cdparanoia
2960 MUSICBRAINZ
=musicbrainz-get-tracks
2964 VORBISCOMMENT
=vorbiscomment
2966 NORMALIZE
=normalize-audio
2968 VORBISGAIN
=vorbisgain
2976 # Options for programs called from abcde
3011 VORBISCOMMENTOPTS
="-R"
3012 METAFLACOPTS
="--no-utf8-convert"
3015 # Default to one process if -j isn't specified
3018 # List of actions to perform - by default, run to completion
3019 ACTIONS
=cddb
,read,encode
,tag
,move
,clean
3021 # This option is basicaly for Debian package dependencies:
3022 # List of prefered outputs - by default, run with whatever we have in the path
3023 DEFAULT_OUTPUT_BINARIES
=vorbis
:oggenc
,flac
:flac
,mp3
:toolame
,mp3
:lame
,mp3
:bladeenc
,spx
:speex
,m4a
:faac
3025 # List of prefered cdromreaders - by default, run whichever we have in the path
3026 DEFAULT_CDROMREADERS
="cdparanoia cdda2wav"
3028 # List of quality levels associated with the encoders:
3029 DEFAULT_QUALITY_XLO
="oggenc:-q -1,lame:-q 9,speex:--quality 1,m4a:"
3030 DEFAULT_QUALITY_LO
="oggenc:-q 1,lame:-q 7,speex:--quality 5,m4a:"
3031 DEFAULT_QUALITY_HI
="oggenc:-q 7,lame:--preset standard,speex:--quality 9,m4a:"
3032 DEFAULT_QUALITY_XHI
="oggenc:-q 10,lame:--preset extreme,speex:--quality 10,m4a:"
3034 # Asume fetch if under FreeBSD. curl is used for Mac OS X. wget is used for
3035 # Linux/OpenBSD. ftp is user for NetBSD.
3036 # Let's use these checkings to determine the OS flavour, which will be used
3038 if [ X$
(uname
) = "XFreeBSD" ] ; then
3043 elif [ X$
(uname
) = "XDarwin" ] ; then
3046 # We should have disktool in OSX, but let's be sure...
3048 CDROMREADERSYNTAX
=cddafs
3049 elif [ X$
(uname
) = "XOpenBSD" ] ; then
3053 elif [ X$
(uname
) = "XNetBSD" ] ; then
3057 elif [ X$
(uname
) = "SunOS" ] ; then
3065 # If CDDBAVAIL is set to n, no CDDB read is done
3066 # If USEID3 is set to n, no ID3 tagging is done
3072 # But before we get into business, let us chop off any GREP environmental
3077 if [ -z "$OUTPUTDIR" ]; then
3081 if [ -z "$WAVOUTPUTDIR" ]; then
3082 WAVOUTPUTDIR
="$OUTPUTDIR"
3085 # Load system defaults
3086 if [ -r /etc
/abcde.conf
]; then
3089 # Load user preference defaults
3090 if [ -r $HOME/.abcde.conf
]; then
3094 # By this time, we need some HTTPGETOPTS already defined.
3095 # If the user has defined a non-default HTTPGET method, we should not be empty.
3097 if [ "$HTTPGETOPTS" = "" ] ; then
3099 wget
) HTTPGETOPTS
="-q -nv -O -";;
3100 curl
) HTTPGETOPTS
="-f -s";;
3101 fetch
)HTTPGETOPTS
="-q -o -";;
3102 ftp) HTTPGETOPTS
="-a -V -o - ";;
3103 *) log warning
"HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
3107 # If the CDROM has not been set yet, find a suitable one.
3108 # If this is a devfs system, default to /dev/cdroms/cdrom0
3109 # instead of /dev/cdrom
3110 if [ "$CDROM" = "" ] ; then
3111 if [ -e /dev
/cdroms
/cdrom0
]; then
3112 CDROM
=/dev
/cdroms
/cdrom0
3113 elif [ -e /dev
/cdrom
]; then
3115 elif [ -e /dev
/cd0c
]; then
3117 elif [ -e /dev
/acd0c
]; then
3119 elif [ -e /dev
/disk1
]; then
3124 # Parse command line options
3125 #while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPq:r:Rs:S:t:T:vVxw:W: opt ; do
3126 while getopts 1a
:bBc
:C
:d
:Defghj
:klLmMnNo
:pPr
:s
:S
:t
:T
:UvVxX
:w
:W
:z opt
; do
3129 a
) ACTIONS
="$OPTARG" ;;
3130 A
) EXPACTIONS
="$OPTARG" ;;
3132 B
) NOBATCHREPLAYGAIN
=y
;;
3133 c
) if [ -e "$OPTARG" ] ; then .
"$OPTARG" ; else log error
"config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
3134 C
) DISCID
="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
3135 d
) CDROM
="$OPTARG" ;;
3138 e
) ERASEENCODEDSTATUS
=y
;;
3139 E
) ENCODING
="$OPTARG" ;;
3143 j
) MAXPROCS
="$OPTARG" ;;
3146 L
) CDDBUSELOCAL
=y
;;
3151 o
) OUTPUTTYPE
="$OPTARG" ;;
3154 q
) QUALITYLEVEL
="$OPTARG" ;;
3155 r
) REMOTEHOSTS
="$OPTARG" ;;
3156 R
) CDDBLOCALRECURSIVE
=y
;;
3157 s
) SHOWCDDBFIELDS
="$OPTARG" ;;
3158 S
) CDSPEEDVALUE
="$OPTARG" ;;
3159 t
) STARTTRACKNUMBER
="$OPTARG" ;;
3160 T
) STARTTRACKNUMBER
="$OPTARG" ; STARTTRACKNUMBERTAG
="y" ;;
3163 echo "This is abcde v$VERSION."
3164 echo "Usage: abcde [options] [tracks]"
3165 echo "abcde -h for extra help"
3168 V
) EXTRAVERBOSE
="y" ;;
3170 X
) CUE2DISCID
="$OPTARG" ;;
3171 w
) COMMENT
="$OPTARG" ;;
3172 W
) if echo $OPTARG |
grep "[[:digit:]]" > /dev
/null
2>&1 ; then
3173 STARTTRACKNUMBER
="${OPTARG}01" ; STARTTRACKNUMBERTAG
="y" ; COMMENT
="CD${OPTARG}"
3175 log error
"argument of -W must be integer"
3179 z
) DEBUG
=y
; CDROMREADERSYNTAX
=debug
; EJECTCD
="n" ;;
3184 shift $
(($OPTIND - 1))
3186 # Here it comes the worse part of the whole thing. From here until we start
3187 # ripping, we have a mixture of sanity checks, verifications, default settigs
3188 # and other crazy stuff that interdepends, but hey, someone has to do it.
3190 # If NOCDDBQUERY is set, don't query the CDDB server.
3191 if [ "$NOCDDBQUERY" = "y" ]; then
3195 # If the user specified a flac file, then switch to special flac mode
3196 if echo "$CDROM" |
grep -i '.flac$' > /dev
/null
2>&1 ; then
3197 if [ ! -f "$CDROM" ]; then
3198 log error
"the defined file for FLAC ripping cannot be found" >&2
3201 vecho warning
"switching to flac CDROMREADERSYNTAX..."
3202 CDROMREADERSYNTAX
=flac
3203 # We have a builtin version of cue2discid...
3204 case "$CUE2DISCID" in
3206 *) NEEDCUE2DISCID
=y
;;
3212 # If the user provided a DISCID, disable eject
3213 if [ -n "$DISCID" ] ||
[ "$CDROMREADERSYNTAX" = "flac" ]; then EJECTCD
=n
; fi
3215 # Check the available cd rippers in the system, from the ones we know.
3216 if [ "$CDROMREADERSYNTAX" = "" ]; then
3217 for DEFAULT_CDROMREADER
in $DEFAULT_CDROMREADERS; do
3218 if new_checkexec
$DEFAULT_CDROMREADER; then
3219 CDROMREADERSYNTAX
=$DEFAULT_CDROMREADER
3223 if [ "$CDROMREADERSYNTAX" = "" ]; then
3224 log error
"no cdreader found in your PATH"
3225 log error
"hints: are all dependencies installed? has the \$PATH been modified?"
3230 # Decide if we can continue.
3231 if [ "$ONETRACK" = "y" ]; then
3232 # FIXME # remove check as soon as we find out about the other readers
3233 case "$CDROMREADERSYNTAX" in
3237 *) log error
"$CDROMREADERSYNTAX does not support ONETRACK mode"
3240 if [ "$BATCHNORM" = "y" ]; then
3241 log warning
"BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
3244 if [ "$NOGAP" = "y" ]; then
3245 log warning
"NOGAP mode is not compatible with ONETRACK mode. Disabling..."
3248 # It does not matter how many tracks we want. In ONETRACK mode we grab them all
3249 # FIXME # allow ranges of tracks to be selected for onetrack ripping
3250 if [ $# -gt 0 ]; then
3251 log warning
"ONETRACK mode selected, grabbing all tracks..."
3254 while [ $# -gt 0 ]; do
3255 # Range parsing code courtesy of Vincent Ho
3256 RSTART
=$
(echo $1 | cut
-f1 -d-)
3257 REND
=$
(echo $1 | cut
-f2 -d-)
3258 if [ "$RSTART" = "$REND" ]; then
3261 NEWTRACKS
=$
(f_seq_line
$RSTART $REND)
3263 TRACKQUEUE
=$
(echo "$TRACKQUEUE" "$NEWTRACKS")
3268 # List of valid actions: cddb,read,normalize,encode,tag,move,playlist,clean
3269 # List of experimental actions: retag,transcode
3271 # Determine what actions are to be done from $ACTIONS and set the
3272 # following environment variables for them:
3284 ## FIXME ## Lets keep compatibility with -M
3285 [ "$DOCUE" != "y" ] && DOCUE
=n
3287 for ACTION
in $
(echo $ACTIONS |
tr , \
)
3290 default
) DOCDDB
=y
; DOREAD
=y
; DOENCODE
=y
; DOTAG
=y
; DOMOVE
=y
; DOCLEAN
=y
;;
3291 cue
) DOCUE
=y
; MAKECUEFILE
=y
;;
3294 normalize
) DONORMALIZE
=y
; DOREAD
=y
;;
3295 # preprocess) DOPREPROCESS=y; DOREAD=y;;
3296 encode
) DOENCODE
=y
; DOREAD
=y
;;
3297 # postprocess) DOPREPROCESS=y; DOENCODE=y; DOREAD=y;;
3298 tag
) DOTAG
=y
; DOREAD
=y
; DOENCODE
=y
; DOCDDB
=y
;;
3299 move
) DOMOVE
=y
; DOTAG
=y
; DOREAD
=y
; DOENCODE
=y
; DOCDDB
=y
;;
3300 replaygain
) DOCDDB
=y
; DOREAD
=y
; DOENCODE
=y
; DOTAG
=y
; DOMOVE
=y
; DOREPLAYGAIN
=y
;;
3301 playlist
) DOCDDB
=y
; DOPLAYLIST
=y
;;
3306 if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
3307 # FIXME # should we abort on error or just inform the user?
3308 log warning
"selected both normalize and replaygain actions"
3311 for SHOWCDDBFIELD
in $
(echo $SHOWCDDBFIELDS |
tr , \
); do
3312 case $SHOWCDDBFIELD in
3313 y
*|Y
*) SHOWCDDBYEAR
="y";;
3314 g
*|G
*) SHOWCDDBGENRE
="y";;
3319 # At this point a CDROM has to be defined, so we check it exists.
3320 if [ X
"$CDROM" != "X" ] ; then
3321 if [ "$CDROMREADERSYNTAX" = "cdda2wav" ] && [ "$NEEDCDROMID" = "y" ] ; then
3322 if [ "$OSFLAVOUR" = "FBSD" ]; then
3323 if echo "$CDROMID" |
grep "^[0-9],[0-9],[0-9]$" >/dev
/null
2>&1 ; then :; else
3324 log error
"CDROMID not in the right format for $CDROMREADERSYNTAX"
3325 log error
"Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
3329 elif [ ! -e "$CDROM" -a X
"$DOREAD" = "Xy" ]; then
3330 log error
"CDROM device cannot be found."
3333 # avoid processing if we are not going to hit the CDROM.
3334 elif [ X
"$DOREAD" = "Xy" ]; then
3335 log error
"CDROM has not been defined or cannot be found"
3339 # USEPIPES pre-tests, before we get into more serious stuff
3340 # Not compatible with:
3341 # - multiple outputs
3343 # - lowdisk algorithm
3345 if [ X
"$USEPIPES" = "Xy" ]; then
3346 if [ $
(echo "$OUTPUTTYPE" |
tr , \ |
wc -w ) -gt 1 ]; then
3347 log error
"Unix pipes not compatible with multiple outputs"
3350 if [ X
"$DONORMALIZE" = "Xy" ]; then
3351 log error
"Unix pipes not compatible with normalizer"
3352 # FIXME # Do we need to exit or shall we just disable the mode?
3355 if [ X
"$BATCHNORM" = "Xy" ]; then
3356 log error
"Unix pipes not compatible with BATCHNORM encoding"
3359 if [ X
"$NOGAP" = "Xy" ]; then
3360 log error
"Unix pipes not compatible with NOGAP encoding"
3363 if [ X
"$DOENCODE" = "Xn" ]; then
3364 vecho warning
"Disabling Unix pipes since we are not encoding!"
3367 if [ X
"$LOWDISK" = "Xy" ]; then
3368 log error
"Unix pipes not compatible with lowdisk algorithm"
3373 # LOWDISK pre-tests, before we get into more problematic stuff
3374 # Not compatible with anything that needs all the files in the hard disc:
3377 if [ X
"$LOWDISK" = "Xy" ]; then
3378 if [ X
"$BATCHNORM" = "Xy" ]; then
3379 log error
"Unix pipes not compatible with BATCHNORM encoding"
3382 if [ X
"$NOGAP" = "Xy" ]; then
3383 log error
"Unix pipes not compatible with NOGAP encoding"
3388 # BATCHNORM pre-tests, before we get into serious problems
3389 # Not compatible with
3390 if [ "$BATCHNORM" = "y" ] && [ "$DONORMALIZE" = "n" ]; then
3391 vecho warning
"Disabling BATCHNORM since we are not normalizing!"
3395 # Check the encoding format from the ones available in the system, if nothing has been configured.
3396 if [ X
"$OUTPUTTYPE" = "X" ]; then
3397 for DEFAULT_OUTPUT
in $
( echo "$DEFAULT_OUTPUT_BINARIES" |
tr , \
); do
3398 DEFAULT_OUTPUT_FORMAT
="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 1)"
3399 DEFAULT_OUTPUT_BINARY
="$(echo $DEFAULT_OUTPUT | cut -d ":" -f 2)"
3400 if [ -x $
(which $DEFAULT_OUTPUT_BINARY) ] ; then
3401 OUTPUTTYPE
=$DEFAULT_OUTPUT_FORMAT
3402 vecho
"No default output type defined. Autoselecting $OUTPUTTYPE..." >&2
3406 if [ X
"$OUTPUTTYPE" = "X" ]; then
3407 log error
"no encoder found in the PATH"
3408 log error
"hints: are all dependencies installed? has the \$PATH been modified?"
3413 # Decide which CDROM reader we're gonna use
3414 case "$CDROMREADERSYNTAX" in
3416 CDROMREADER
="$CDPARANOIA"
3417 CDROMREADEROPTS
="$CDPARANOIAOPTS"
3420 CDROMREADER
="$CDDA2WAV"
3421 CDROMREADEROPTS
="$CDDA2WAVOPTS"
3424 CDROMREADER
="$DAGRAB"
3425 CDROMREADEROPTS
="$DAGRABOPTS"
3428 CDROMREADER
="$CDDAFS"
3429 CDROMREADEROPTS
="$CDDAFSOPTS"
3433 CDROMREADEROPTS
="$FLACOPTS"
3437 # There's only one normalize...
3438 case "$NORMALIZERSYNTAX" in
3440 NORMALIZER
="$NORMALIZE"
3441 NORMALIZEROPTS
="$NORMALIZEOPTS"
3445 # Allow -o OUTPUT(1):OPTIONS(1),...,OUTPUT(N):OPTIONS(N) mode of operation
3446 if echo "$OUTPUTTYPE" |
grep ":" > /dev
/null
2>&1 ; then
3447 for OUTPUT
in "$(echo "$OUTPUTTYPE" | tr \ \|| tr , \ | tr \| \ )"; do
3449 vorbis
:*|ogg
:*) OGGENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3450 mp3
:*) MP3ENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3451 flac
:*) FLACENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3452 spx
:*) SPEEXENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3453 mpc
:*) MPPENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3454 m4a
:*) AACENCODEROPTSCLI
="$( echo $OUTPUT | cut -d: -f2- )" ;;
3457 for OUTPUT
in "$(echo "$OUTPUTTYPE" | tr , \ )"; do
3458 TEMPOUTPUT
=$
( echo "$OUTPUT" | cut
-d: -f1 )
3459 TEMPOUTPUTTYPE
="${TEMPOUTPUTTYPE:+$TEMPOUTPUTTYPE,}$TEMPOUTPUT"
3461 OUTPUTTYPE
="$TEMPOUTPUTTYPE"
3464 # If nothing has been specified, use oggenc for oggs and lame for mp3s and flac
3465 # for flacs and speexenc for speex and mppenc for mpps and faac for m4as
3467 # Getting ready for multiple output changes
3468 for OUTPUT
in $
(echo $OUTPUTTYPE |
tr , \
)
3472 [ "$OGGENCODERSYNTAX" = "default" ] && OGGENCODERSYNTAX
=oggenc
3473 [ "$DOTAG" = "y" ] && NEEDCOMMENTER
=y
3474 [ "$DOREPLAYGAIN" = "y" ] && NEEDVORBISGAIN
=y
3475 OGGOUTPUTCONTAINER
=ogg
3478 [ "$MP3ENCODERSYNTAX" = "default" ] && MP3ENCODERSYNTAX
=lame
3479 [ "$DOTAG" = "y" ] && NEEDTAGGER
=y
3480 [ "$DOREPLAYGAIN" = "y" ] && NEEDMP3GAIN
=y
3483 [ "$FLACENCODERSYNTAX" = "default" ] && FLACENCODERSYNTAX
=flac
3484 [ "$DOTAG" = "y" ] && NEEDMETAFLAC
=y
3485 [ "$DOREPLAYGAIN" = "y" ] && NEEDMETAFLAC
=y
3486 [ "$ONETRACK" = "y" ] && [ "$DOCUE" = "y" ] && NEEDMETAFLAC
=y
3489 [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX
=speexenc
3490 # [ "$DOREPLAYGAIN" = "y" ] &&
3493 [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX
=mppenc
3494 [ "$DOREPLAYGAIN" = "y" ] && NEEDMPPGAIN
=y
3497 [ "$AACENCODERSYNTAX" = "default" ] && AACENCODERSYNTAX
=faac
3500 if [ "$KEEPWAVS" = "y" ]; then
3501 vecho
"Setting the KEEPWAVS option, since the resulting wav files were requested..."
3505 *) log error
"Invalid OUTPUTTYPE defined"
3511 # decide which encoder
3512 case "$MP3ENCODERSYNTAX" in
3514 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$LAMEOPTS}"
3518 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$TOOLAMEOPTS}"
3519 MP3ENCODER
="$TOOLAME"
3522 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$GOGOOPTS}"
3526 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$BLADEENCOPTS}"
3527 MP3ENCODER
="$BLADEENC"
3530 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$L3ENCOPTS}"
3534 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$XINGMP3ENCOPTS}"
3535 MP3ENCODER
="$XINGMP3ENC"
3538 MP3ENCODEROPTS
="${MP3ENCODEROPTSCLI:-$MP3ENCOPTS}"
3539 MP3ENCODER
="$MP3ENC"
3542 case "$OGGENCODERSYNTAX" in
3544 OGGENCODEROPTS
="${OGGENCODEROPTSCLI:-$VORBIZEOPTS}"
3545 OGGENCODER
="$VORBIZE"
3548 OGGENCODEROPTS
="${OGGENCODEROPTSCLI:-$OGGENCOPTS}"
3549 OGGENCODER
="$OGGENC"
3552 case "$FLACENCODERSYNTAX" in
3554 FLACENCODEROPTS
="${FLACENCODEROPTSCLI:-$FLACOPTS}"
3556 # FLAC streams can be encapsulated on a Ogg transport layer
3557 if echo "$FLACENCODEROPTS" |
egrep -- "(^| )--ogg($| )" > /dev
/null
2>&1 ;then
3558 log error
"FLAC on an Ogg container is not yet supported"
3559 log error
"due to problem with adding comments to such files"
3561 FLACOUTPUTCONTAINER
=ogg
3563 FLACOUTPUTCONTAINER
=flac
3567 case "$SPEEXENCODERSYNTAX" in
3569 SPEEXENCODEROPTS
="${SPEEXENCODEROPTSCLI:-$SPEEXENCOPTS}"
3570 SPEEXENCODER
="$SPEEXENC"
3573 case "$MPPENCODERSYNTAX" in
3575 MPPENCODEROPTS
="${MPPENCODEROPTSCLI:-$MPPENCOPTS}"
3576 MPPENCODER
="$MPPENC"
3579 case "$AACENCODERSYNTAX" in
3581 AACENCODEROPTS
="${AACENCODEROPTSCLI:-$AACENCOPTS}"
3582 AACENCODER
="$AACENC"
3587 if [ "$ID3TAGV" = "1" ]; then
3589 TAGGEROPTS
="$ID3OPTS"
3592 TAGGEROPTS
="$ID3V2OPTS"
3595 # Specific for NOGAP is the use of lame. Another encoder fails...
3596 if [ "$NOGAP" = "y" ] && [ ! "$MP3ENCODER" = "lame" ]; then
3597 log warning
"the NOGAP option is specific of lame. Deactivating..."
3602 case "$CUEREADERSYNTAX" in
3604 CUEREADEROPTS
="${CDROM}"
3609 # which information retrieval tool are we using?
3615 # Check if both OGGEOUTPUTCONTAINER and FLACOUTPUTCONTAINER are the same, and differentiante them
3616 if [ X
"$OGGOUTPUTCONTAINER" = "Xogg" ] && [ X
"$FLACOUTPUTCONTAINER" = "Xogg" ]; then
3617 log error
"FLAC on an Ogg container is not yet supported"
3618 log error
"due to problem with adding comments to such files"
3620 OGGOUTPUTCONTAINER
=ogg.ogg
3621 FLACOUTPUTCONTAINER
=flac.ogg
3622 vecho warning
"modified file endings due to conflicting transport layers in Ogg/Vorbis and Ogg/FLAC"
3625 # Clean up nice options (either use '-n NICELEVEL or -NICELEVEL')
3627 if [ "$ENCNICE" ]; then
3628 ENCNICE
="-n $ENCNICE"
3630 if [ "$READNICE" ]; then
3631 READNICE
="-n $READNICE"
3633 if [ "$DISTMP3NICE" ]; then
3634 DISTMP3NICE
="-n $DISTMP3NICE"
3637 # Don't check for stuff if it's not needed
3638 if [ "$REMOTEHOSTS" ]; then
3641 if [ "$DONORMALIZE" = "y" ]; then
3644 if [ "$EJECTCD" = "y" ]; then
3647 if [ ! "$CDDBAVAIL" = "n" ] && [ "$DOCDDB" = "y" ]; then
3648 if [ "$CDDBMETHOD" = "cddb" ]; then
3650 elif [ "$CDDBMETHOD" = "musicbrainz" ]; then
3654 if [ "$DOCUE" = "y" ]; then
3658 if [ X
"$CDSPEEDVALUE" != "X" ] && [ "$DOREAD" = "y" ]; then
3659 case "$CDROMREADERSYNTAX" in
3660 cdparanoia|debug
) CDROMREADEROPTS
="$CDPARANOIAOPTS -S $CDSPEEDVALUE" ;;
3661 ### FIXME ### translate "cue2discid" from python to bash
3662 flac
) NEEDMETAFLAC
=y
; NEEDCUE2DISCID
=y
; CDSPEEDVALUE
="" ;;
3667 ###USEPIPESSUPPORT###
3669 # Rippers with USEPIPE support
3670 # FIXME # Include here all the rippers we can figure out support pipes
3671 PIPERIPPER_cdparanoia
="-"
3672 PIPERIPPER_debug
="-"
3673 PIPERIPPER_flac
="-c "
3675 # Encoders with USEPIPE support
3676 # FIXME # Include here all the encoders we can figure out support pipes
3682 # Figure out if we can use pipes with the ripper/encoder combination
3684 if [ "$USEPIPES" = "y" ]; then
3685 PIPERIPPERSVARCHECK
="PIPERIPPER_${CDROMREADERSYNTAX}"
3688 PIPEENCODERSVARCHECK
="PIPE_$MP3ENCODERSYNTAX" ;;
3690 PIPEENCODERSVARCHECK
="PIPE_$OGGENCODERSYNTAX" ;;
3692 PIPEENCODERSVARCHECK
="PIPE_$FLACENCODERSYNTAX" ;;
3694 PIPEENCODERSVARCHECK
="PIPE_$SPEEXENCODER" ;;
3696 PIPEENCODERSVARCHECK
="PIPE_$MPPENCODER" ;;
3698 decho
"PIPERIPPERSVARCHECK: $( eval echo "\$
$PIPERIPPERSVARCHECK" )"
3699 if [ "$( eval echo "\$
$PIPERIPPERSVARCHECK" )" = "$" ] || \
3700 [ "$( eval echo "\$
$PIPERIPPERSVARCHECK" )" = "" ] ; then
3701 log error
"no support for pipes with given ripper"
3702 log error
"read the USEPIPES file from the source tarball to get help."
3703 log error
"On a Debian system, it is under /usr/share/doc/abcde/USEPIPES.gz"
3706 decho
"PIPEENCODERSVARCHECK: $( eval echo "\$
$PIPEENCODERSVARCHECK" )"
3707 if [ "$( eval echo "\$
$PIPEENCODERSVARCHECK" )" = "$" ] || \
3708 [ "$( eval echo "\$
$PIPEENCODERSVARCHECK" )" = "" ] ; then
3709 log error
"no support for pipes with given encoder"
3710 log error
"read the USEPIPES file from the source tarball to help"
3711 log error
"on a Debian system, read /usr/share/doc/abcde/USEPIPES.gz"
3716 # Make sure a buncha things exist
3717 for X
in $CDROMREADER $CDDISCID ${NEEDTAGGER+$TAGGER} $MP3ENCODER \
3718 $OGGENCODER $FLACENCODER $SPEEXENCODER $MPPENCODER \
3720 ${NEEDHTTPGET+$HTTPGET} ${NEEDDISTMP3+$DISTMP3} \
3721 ${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC} \
3722 ${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT} \
3723 ${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED} \
3724 ${NEEDVORBISGAIN+$VORBISGAIN} ${NEEDMP3GAIN+$MP3GAIN} \
3725 ${NEEDMPPGAIN+$MPPGAIN} ${NEEDCUEREADER+$CUEREADER} \
3726 ${NEEDCUE2DISCID+$CUE2DISCID}
3731 # And last but not least, check if we can diff between files. We do not abort,
3732 # since diffing is not critical...
3733 if [ -x $
(which $DIFF) ]; then :; else
3734 vecho warning
"Disabling diff since we cannot find it in the \$PATH..."
3738 ## Now that we have metaflac, check if we need cue2discid
3739 #case $CDROMREADERSYNTAX in
3741 # TRACKINFO=$($METAFLAC --show-tag=CDDB $CDROM | cut -d"=" -f2 | egrep "[a-f0-9]{8}")
3742 # if [ "$TRACKINFO" = "" ]; then
3743 # checkexec ${NEEDCUE2DISCID+$CUE2DISCID}
3748 CDROMREADER
="$CDROMREADER $CDROMREADEROPTS"
3749 CDDBTOOL
="$CDDBTOOL $CDDBTOOLOPTS"
3750 HTTPGET
="$HTTPGET $HTTPGETOPTS"
3752 # Here it used to say:
3753 # One thousand lines in, we can start doing stuff with things
3754 # Well, right now we are at line 3737 ;)
3756 # Export needed things so they can be read in this subshell
3757 export CDDBTOOL ABCDETEMPDIR TRACKQUEUE LOWDISK EJECTCD EJECT EJECTOPTS
3758 export CDROM CDDBDATA REMOTEHOSTS MAXPROCS HTTPGET MD5SUM
3760 if [ "$DOREAD" = "y" ]; then
3761 # User-definable function to set some things. Use it for
3762 # - closing the CD tray with eject -t
3763 # - set the CD speed value with eject -x
3764 vecho
-n "Executing customizable pre-read function... "
3766 pre_read
# Execute the user-defined pre-read funtion. Close the CD with it.
3771 case "$CDDBMETHOD" in
3773 do_discid
# Get ABCDETEMPDIR created and status file initialized
3780 if [ "$DOCDDB" = "y" ]; then
3781 # start with a sane default:
3782 CDDBLOCALSTATUS
=notfound
3783 if [ $CDDBUSELOCAL = "y" ]; then
3786 if checkstatus cddb-choice
> /dev
/null
; then
3789 if [ "$CDDBLOCALSTATUS" = "notfound" ] ; then
3790 case "$CDDBMETHOD" in
3804 eval "$($CDDBTOOL parse "$CDDBDATA")"
3807 # Before reading tracks, we set the speed of the device
3809 if [ X
"$CDSPEEDVALUE" != "X" ]; then
3810 case "$CDROMREADERSYNTAX" in
3811 cdparanoia|debug
) ;;
3817 # Define the first and last track, since we might need them later in several places
3818 FIRSTTRACK
=$
( get_first
$TRACKQUEUE )
3819 LASTTRACK
=$
( get_last
$TRACKQUEUE )
3821 if [ -f "$ABCDETEMPDIR/status" ] && [ X
"$ERASEENCODEDSTATUS" = "Xy" ]; then
3822 mv "$ABCDETEMPDIR/status" "$ABCDETEMPDIR/status.old"
3823 grep -v ^encodetracklocation-
< "$ABCDETEMPDIR/status.old" \
3824 |
grep -v ^encode-output
> "$ABCDETEMPDIR/status"
3827 if checkstatus onetrack
; then ONETRACK
=y
; fi
3829 if [ "$ONETRACK" = "y" ]; then
3830 # Reuse the CUEFILE in case we created it (now or in a previous run)
3831 if CUEFILE
=$
(checkstatus cuefile
); then
3836 # Create playlist if needed (backgroundable) and start reading in tracks
3840 if [ ! "$ONETRACK" = "y" ]; then
3841 if [ "$DOPLAYLIST" = "y" ]; then
3842 echo Creating playlist...
>&2
3847 # For the lowdisk option, only one program is running at once so the encoder
3848 # can be unsilenced right away.
3849 if [ "$LOWDISK" = "y" ] ||
[ "$ONETRACK" = "y" ]; then
3850 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3853 if [ "$ONETRACK" = "y" ]; then
3854 TRACKS
="$FIRSTTRACK"
3855 if [ "$USEPIPES" = "y" ]; then
3856 if checkstatus readencodetrack-
$FIRSTTRACK; then :; else
3857 do_cdread onetrack
$FIRSTTRACK $LASTTRACK | do_encode
$FIRSTTRACK %local0
% > /dev
/null
2>&1
3860 if checkstatus readtrack-
$FIRSTTRACK; then :; else
3861 do_cdread onetrack
$FIRSTTRACK $LASTTRACK
3865 for UTRACKNUM
in $TRACKQUEUE
3867 if [ "$DOREAD" = "y" ]; then
3868 if [ "$USEPIPES" = "y" ]; then
3869 if checkstatus readencodetrack-
$UTRACKNUM; then :; else
3870 # Read, pipe, shut up!
3871 do_cdread
$UTRACKNUM | do_encode
$UTRACKNUM %local0
% > /dev
/null
2>&1
3874 if checkstatus readtrack-
$UTRACKNUM; then :; else
3875 do_cdread
$UTRACKNUM
3877 if [ "$?" != "0" ]; then
3878 # CD read failed - don't give the goahead to
3885 if [ "$NOGAP" = "y" ] ||
[ "$BATCHNORM" = "y" ]; then
3888 # If we are not reading, set the encode output to loud already, so
3889 # that we can see the output of the first track.
3890 if [ "$MAXPROCS" = "1" ] && [ ! "$DOREAD" = "y" ]; then
3891 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3893 echo NEXTTRACK
# Get the encoder machine churning again
3894 if [ "$DOREAD" = "y" ]; then
3895 if [ "$LOWDISK" = "y" ] && [ "$DOENCODE" = "y" ]; then
3896 until checkstatus encodetrack-
$UTRACKNUM
3898 if checkerrors encodetrack-
$UTRACKNUM; then
3909 # Now that we're done the encoding can be loud again -
3910 # if we're not using SMP.
3911 if [ "$MAXPROCS" = "1" ]; then
3912 echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
3915 # All tracks read, start encoding.
3916 if [ "$NOGAP" = "y" ] ||
[ "$BATCHNORM" = "y" ] ||
[ "$ONETRACK" = "y" ]; then
3920 # Execute the user-defined post_read funtion before ejecting CD
3923 # We are now finished with the cdrom - it can be safely ejected. Note that
3924 # abcde will not have completed yet.
3925 if [ "$EJECTCD" = "y" ] && [ -x $
(which $EJECT) ]; then
3926 # We check if the disk we are processing is actually the disk inside the
3927 # CD tray. If not, we do not eject the CD, since it might be so that the
3928 # user ejected it manually.
3929 #CURRENTTRACKINFO=$($CDDISCID $CDROM)
3930 #if if [ "$?" != "1" ] && [ "$CURRENTTRACKINFO" = "$TRACKINFO" ] ; then
3931 # More FreeBSD bits.
3932 if [ X
"$(uname)" = X
"FreeBSD" ] ; then
3933 # FreeBSD eject uses the EJECT environment variable to name the CDROM
3934 # but in this script EJECT is in the envionment and names the program
3937 # The FreeBSD eject needs "adc0" not "/dev/adc0c"
3938 cd="$(echo $CDROM | sed -e 's=.*/==;s=[a-h]$==;')"
3939 $eject $EJECTOPTS $cd
3940 elif [ X
"$(uname)" = X
"Darwin" ] ; then
3941 disktool
-e ${CDROM#/dev/} 0
3943 $EJECT $EJECTOPTS "$CDROM"
3950 ## Do we need to pre-process
3951 #if [ x"$PREPROCESS" = "x" ] ; then
3954 # for PRETRACKNUM in $TRACKQUEUE
3957 # if [ "$GOAHEAD" = "NO" ]; then break; fi
3959 # until [ $PREPROCEED ]
3961 # if checkstatus readtrack-$PRETRACKNUM; then PREPROCEED=y; break; fi
3962 # # all locations are working, wait and try again later
3963 # if [ ! $PREPROCEED ]; then sleep 3; fi
3965 # ( do_preprocess $PRETRACKNUM
3973 # In BATCHNORM and/or NOGAP modes, we want all tracks to be read first.
3975 if [ "$BATCHNORM" = "y" ] ||
[ "$NOGAP" = "y" ]; then
3976 read GOAHEAD
# For blocking - will contain either "NO" or "NEXTTRACK"
3977 if [ "$GOAHEAD" = "NO" ]; then break; fi
3978 for LASTTRACK
in $TRACKQUEUE; do :; done
3979 if checkstatus readtrack-
$LASTTRACK; then
3980 if [ "$DONORMALIZE" = "y" ] && [ "$BATCHNORM" = "y" ]; then
3981 if checkstatus normalizetrack-
$LASTTRACK; then :; else do_batch_normalize
; fi
3982 if checkerrors batch-normalize
; then exit 1; fi
3984 if [ "$DOENCODE" = "y" ] && [ "$NOGAP" = "y" ]; then
3985 if [ "$DONORMALIZE" = "y" ]; then
3986 for UTRACKNUM
in $TRACKQUEUE
3988 if checkstatus readtrack-
$UTRACKNUM; then
3989 if checkstatus normalizetrack-
$UTRACKNUM; then :; else do_normalize
$UTRACKNUM; fi
3993 if checkstatus encodetrack-
$LASTTRACK; then :; else do_nogap_encode
; fi
3994 if checkerrors nogap-encode
; then exit 1; fi
3999 # If we are using ONETRACK, we can proceed with the normal encoding using just the $FIRSTTRACK as TRACKQUEUE
4000 if [ "$ONETRACK" = "y" ] ; then
4001 TRACKQUEUE
="$FIRSTTRACK"
4002 TRACKS
="$FIRSTTRACK"
4005 # Do the encoding, including parallelization of remote encoding
4006 # Figure out where each track is going to be encoded
4007 ENCODELOCATIONS
="$(echo $REMOTEHOSTS | tr , ' ')"
4008 if [ "$MAXPROCS" != "0" ]; then
4009 for NUM
in $
(f_seq_row
1 "$MAXPROCS")
4011 ENCODELOCATIONS
="$ENCODELOCATIONS %local$NUM%"
4015 ENCODELOCATIONS
=$
(echo $ENCODELOCATIONS)
4016 for UTRACKNUM
in $TRACKQUEUE
4019 read GOAHEAD
# For blocking - will contain either "NO" or "NEXTTRACK"
4020 if [ "$GOAHEAD" = "NO" ]; then break; fi
4021 # find out where this track is to be encoded
4022 if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
4023 # Make sure we have a place to encode this, if not, exit stage right
4024 if [ -z "$ENCODELOCATIONS" ]; then
4030 for LOCATION
in $ENCODELOCATIONS
4032 PREVIOUSTRACK
="$(checkstatus encodetracklocation-$LOCATION)"
4033 # check first if a track has ever been assigned to this location
4034 if [ -z "$PREVIOUSTRACK" ]; then PROCEED
=y
; break; fi
4035 # If it errored out, rebuild $ENCODELOCATIONS without this location in it
4036 if checkerrors encodetrack-
$PREVIOUSTRACK; then
4037 for TEMPLOCATION
in $ENCODELOCATIONS
4039 if [ "$TEMPLOCATION" != "$LOCATION" ]; then
4040 TEMPENCODELOCATIONS
="$TEMPENCODELOCATIONS $TEMPLOCATION"
4043 ENCODELOCATIONS
=$
(echo $TEMPENCODELOCATIONS)
4048 # We're still here, this location must have been previously assigned,
4049 # and last completed without error - check if it's done with the
4050 # previous track yet
4051 if checkstatus encodetrack-
$PREVIOUSTRACK; then PROCEED
=y
; break; fi
4053 # all locations are working, wait and try again later
4054 if [ ! $PROCEED ]; then sleep 3; fi
4056 # Record the location we're about to encode the next track at
4057 echo "encodetracklocation-$LOCATION=$UTRACKNUM" >> "$ABCDETEMPDIR/status"
4059 # Don't proceed with the rest of the loop if we can't encode
4060 if [ "$ABORT" ]; then continue; fi
4061 ## FIXME ## Add here
4062 ## run_command tagtrack-$OUTPUT-$1 $METAFLAC $METAFLACOPTS ${IMPORTCUESHEET:+--import-cuesheet-from="$ABCDETEMPDIR/$CUEFILE"} --import-tags-from=- "$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
4063 # Set TRACKNUM, TRACKNAME
4064 if [ -e "$CDDBDATA" ]; then
4065 if [ "$ONETRACK" = "y" ]; then
4067 TRACKNUM
="$FIRSTTRACK"
4071 CDDBTRACKNUM
=$
(expr $UTRACKNUM - 1)
4072 getcddbinfo TRACKNAME
4076 # You can't encode a file which needs to be normalized before finishing
4077 # You can't tag a file before it's finished encoding -
4078 # thus all of this is backgrounded together
4080 if [ "$DONORMALIZE" = "y" ]; then
4081 if checkstatus readtrack-
$UTRACKNUM; then
4082 if checkstatus normalizetrack-
$UTRACKNUM; then :; else do_normalize
$UTRACKNUM; fi
4085 if [ "$DOENCODE" = "y" -a "$USEPIPES" != "y" ]; then
4086 if checkstatus readtrack-
$UTRACKNUM; then
4087 #if checkstatus encodetrack-$UTRACKNUM; then :; else do_encode $UTRACKNUM $LOCATION; fi
4088 if [ "$DONORMALIZE" = "y" ]; then
4089 if checkstatus normalizetrack-
$UTRACKNUM; then
4090 if checkstatus encodetrack-
$UTRACKNUM; then :; else do_encode
$UTRACKNUM $LOCATION $OUTPUT; fi
4093 if checkstatus encodetrack-
$UTRACKNUM; then :; else do_encode
$UTRACKNUM $LOCATION $OUTPUT; fi
4097 if [ "$DOTAG" = "y" ]; then
4098 if checkstatus encodetrack-
$UTRACKNUM; then
4099 if checkstatus tagtrack-
$UTRACKNUM; then :; else do_tag
$UTRACKNUM; fi
4101 # Lets tag the cue file
4102 if checkstatus cleancuefile
>/dev
/null
; then :; else
4103 if checkstatus cuefile
>/dev
/null
; then
4108 if [ "$DOMOVE" = "y" ]; then
4109 if checkstatus tagtrack-
$UTRACKNUM; then
4110 if checkstatus movetrack-
$UTRACKNUM; then :; else do_move
$UTRACKNUM; fi
4117 # Go through it again and make sure there's no distmp3 stragglers, otherwise
4118 # we'll delete the files they're working on
4119 # Do NOT play ball if there is no ball to play (so ABORT if needed)
4120 ## FIXME ## Check also for files which are encoded using PIPEs.
4121 if [ "$DOENCODE" = "y" ] && [ "$USEPIPES" != "y" ] && [ ! "$ABORT" ]; then
4126 for LOCATION
in $ENCODELOCATIONS
4128 CHECKTRACK
="$(checkstatus encodetracklocation-$LOCATION)"
4129 # "How can he give us a status update, if he's DEAD?"
4130 if checkstatus encodetrack-
$CHECKTRACK; then
4133 # Nothing to see here please go quietly back to your homes
4134 if [ -z "$CHECKTRACK" ]; then continue; fi
4135 # You're still here? Maybe there is something...
4136 if checkstatus encodetrack-
$CHECKTRACK; then :; else PROCEED
= ; break; fi
4139 if [ ! $PROCEED ]; then sleep 5; fi
4142 # If the above didn't catch the stragglers, this will
4144 if [ "$DOREPLAYGAIN" = "y" ]; then
4148 # Check to see if run_command logged any errors
4149 if [ -f "$ABCDETEMPDIR/errors" ]; then
4150 log error
"The following commands failed to run:"
4151 cat "$ABCDETEMPDIR/errors"
4155 if [ "$KEEPWAVS" = "y" ];then
4159 # Check if we have moved all the formats we had previously encoded, if we are not using the FORCE.
4160 if [ "$DOCLEAN" = "y" ] && [ ! "$FORCE" = "y" ]; then
4161 ENCODED_FORMATS
=$
(egrep "^encodetrack-(.{3,6})-(.{1,2})$" "$ABCDETEMPDIR/status" | cut
-d"-" -f2 |
sort -u |
tr '\n' '|')
4162 MOVED_FORMATS
=$
(egrep "^movetrack-output-(.{3,6})$" "$ABCDETEMPDIR/status" | cut
-d"-" -f3 |
sort -u |
tr '\n' '|')
4163 if [ "$ENCODED_FORMATS" != "$MOVED_FORMATS" ]; then
4164 log warning
"The encoded formats does not match with the moved ones"
4165 log warning
"Formats encoded: $( echo $ENCODED_FORMATS | tr "|
" " " )"
4166 log warning
"Formats moved: $( echo $MOVED_FORMATS | tr "|
" " " )"
4167 log warning
"Use \"abcde -a clean -f -C $DISCID\" to force the removal of the remaining data."
4171 if [ "$DOCLEAN" = "y" ]; then
4172 # Wipe all the evidence
4173 # Gimme gimme gimme some more time!
4175 rm -rf "$ABCDETEMPDIR"
4178 echo "Finished. Not cleaning $ABCDETEMPDIR."