X-Git-Url: https://git.hcoop.net/clinton/Smoothieware.git/blobdiff_plain/3952058635284b651cf222afb5a9a1f9aa5981f0..dac88f3fb56d3c6f555ca5fe2424dfb3c9c0e57e:/makefile

diff --git a/makefile b/makefile
dissimilarity index 99%
index 435f8dc5..9a10c929 100644
--- a/makefile
+++ b/makefile
@@ -1,75 +1,35 @@
-# Copyright 2011 Adam Green (http://mbed.org/users/AdamGreen/)
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-PROJECT=main
-GCC4MBED_DIR=./gcc4mbed
-INCDIRS=
-LIBS_PREFIX=
-LIBS_SUFFIX=
-SRC=./src
-
-#GCC4MBED_TYPE=Debug
-#GCC4MBED_TYPE=Release
-GCC4MBED_TYPE=Checked
-
-# Set to 1 to tag each heap allocation with the caller's return address.
-HEAP_TAGS=1
-
-# Set to 1 configure MPU to disable write buffering and eliminate imprecise bus faults.
-WRITE_BUFFER_DISABLE=1
-
-# Set to 1 to allow MRI debug monitor to take full control of UART0 and use it
-# as a dedicated debug channel.  If you are using the USB based serial port for
-# the console then this should cause you no problems.  Set MRI_BREAK_ON_INIT to
-# 0 if you don't want to break into GDB at startup.
-ENABLE_DEBUG_MONITOR?=0
-
-# Set to non zero value if you want checks to be enabled which reserve a
-# specific amount of space for the stack.  The heap's growth will be
-# constrained to reserve this much space for the stack and the stack won't be
-# able to grow larger than this amount.
-STACK_SIZE=3072
-
-ifeq "$(ENABLE_DEBUG_MONITOR)" "1"
-# Can add MRI_UART_BAUD=115200 to next line if GDB fails to connect to MRI.
-# Tends to happen on some Linux distros but not Windows and OS X.
-MRI_UART=MRI_UART_0
-MRI_BREAK_ON_INIT=1
-MRI_SEMIHOST_STDIO=1
-else
-MRI_UART=MRI_UART_0 MRI_UART_SHARE
-MRI_BREAK_ON_INIT=0
-MRI_SEMIHOST_STDIO=0
-endif
-
-CONSOLE=/dev/ttyUSB0
-
-include ./gcc4mbed/build/gcc4mbed.mk
-
-.PHONY: debug-store flash upload debug console
-
-debug-store: $(PROJECT).elf
-	cp $(PROJECT).elf $(PROJECT)_lastupload.elf
-
-flash: $(PROJECT).hex debug-store
-	lpc21isp $< $(CONSOLE) 115200 12000
-
-upload: $(PROJECT).bin debug-store
-	dfu-util -d 1d50:6015 -R -D $<
-
-debug: $(PROJECT)_lastupload.elf
-	arm-none-eabi-gdb $< -ex  "set target-charset ASCII" -ex "set remotelogfile mri.log" -ex "target remote $(CONSOLE)"
-
-console:
-	stty raw ignbrk -echo 2000000 < $(CONSOLE)
-	( cat <&3 & cat >&3 ; kill %% ) 3<>$(CONSOLE)
+#!/usr/bin/make
+
+DIRS = mbed src
+DIRSCLEAN = $(addsuffix .clean,$(DIRS))
+
+all:
+	@ $(MAKE) -C mbed
+	@echo Building Smoothie
+	@ $(MAKE) -C src
+
+clean: $(DIRSCLEAN)
+
+$(DIRSCLEAN): %.clean:
+	@echo Cleaning $*
+	@ $(MAKE) -C $*  clean
+
+debug-store:
+	@ $(MAKE) -C src debug-store
+
+flash:
+	@ $(MAKE) -C src flash
+
+dfu:
+	@ $(MAKE) -C src dfu
+
+upload:
+	@ $(MAKE) -C src upload
+
+debug:
+	@ $(MAKE) -C src debug
+
+console:
+	@ $(MAKE) -C src console
+
+.PHONY: all $(DIRS) $(DIRSCLEAN) debug-store flash upload debug console dfu