X-Git-Url: https://git.hcoop.net/bpt/emacs.git/blobdiff_plain/2300368463c9719839a0289cd6dccaa93d3274cf..acaf905b1130aae80fa59d2c861ffd4c8eb75486:/doc/emacs/abbrevs.texi diff --git a/doc/emacs/abbrevs.texi b/doc/emacs/abbrevs.texi index 9039ca662a..2df1a6b8d5 100644 --- a/doc/emacs/abbrevs.texi +++ b/doc/emacs/abbrevs.texi @@ -1,6 +1,6 @@ @c This is part of the Emacs manual. -@c Copyright (C) 1985, 1986, 1987, 1993, 1994, 1995, 1997, 2001, 2002, 2003, -@c 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +@c Copyright (C) 1985-1987, 1993-1995, 1997, 2001-2012 +@c Free Software Foundation, Inc. @c See file emacs.texi for copying conditions. @node Abbrevs @chapter Abbrevs @@ -45,17 +45,14 @@ expanding to @samp{find outer otter}, then you can insert @samp{find outer otter.} into the buffer by typing @kbd{f o o .}. @findex abbrev-mode -@vindex abbrev-mode @cindex Abbrev mode @cindex mode, Abbrev - Abbrevs expand only when Abbrev mode (a minor mode) is enabled. -Disabling Abbrev mode does not cause abbrev definitions to be forgotten, -but they do not expand until Abbrev mode is enabled again. The command -@kbd{M-x abbrev-mode} toggles Abbrev mode; with a numeric argument, it -turns Abbrev mode on if the argument is positive, off otherwise. -@xref{Minor Modes}. @code{abbrev-mode} is also a variable; Abbrev mode is -on when the variable is non-@code{nil}. The variable @code{abbrev-mode} -automatically becomes local to the current buffer when it is set. + Abbrevs expand only when Abbrev mode, a buffer-local minor mode, is +enabled. Disabling Abbrev mode does not cause abbrev definitions to +be forgotten, but they do not expand until Abbrev mode is enabled +again. The command @kbd{M-x abbrev-mode} toggles Abbrev mode; with a +numeric argument, it turns Abbrev mode on if the argument is positive, +off otherwise. @xref{Minor Modes}. Abbrevs can have @dfn{mode-specific} definitions, active only in one major mode. Abbrevs can also have @dfn{global} definitions that are active in @@ -108,22 +105,18 @@ region as the expansion of the abbrev being defined. @kindex C-x a l @findex add-mode-abbrev The command @kbd{C-x a l} (@code{add-mode-abbrev}) is similar, but -defines a mode-specific abbrev. Mode-specific abbrevs are active only in a -particular major mode. @kbd{C-x a l} defines an abbrev for the major mode -in effect at the time @kbd{C-x a l} is typed. The arguments work the same -as for @kbd{C-x a g}. +defines a mode-specific abbrev for the current major mode. The +arguments work the same as for @kbd{C-x a g}. @kindex C-x a i g @findex inverse-add-global-abbrev @kindex C-x a i l @findex inverse-add-mode-abbrev - If the abbrev text itself is already in the buffer, you can use the -commands @kbd{C-x a i g} (@code{inverse-add-global-abbrev}) and -@kbd{C-x a i l} (@code{inverse-add-mode-abbrev}) to define it as an -abbrev by specify the expansion in the minibuffer. These commands are -called ``inverse'' because they invert the meaning of the two text -strings they use (one from the buffer and one read with the -minibuffer). + @kbd{C-x a i g} (@code{inverse-add-global-abbrev}) and @kbd{C-x a i +l} (@code{inverse-add-mode-abbrev}) perform the opposite task: if the +abbrev text is already in the buffer, you use these commands to define +an abbrev by specifying the expansion in the minibuffer. These +commands will expand the abbrev text used for the definition. @findex define-mode-abbrev @findex define-global-abbrev @@ -132,8 +125,8 @@ expansion in the buffer using the command @code{define-global-abbrev}. It reads two arguments---the abbrev, and its expansion. The command @code{define-mode-abbrev} does likewise for a mode-specific abbrev. - To change the definition of an abbrev, just define a new definition. -When the abbrev has a prior definition, the abbrev definition commands + To change the definition of an abbrev, just make a new definition. +When an abbrev has a prior definition, the abbrev definition commands ask for confirmation before replacing it. @findex kill-all-abbrevs @@ -155,11 +148,11 @@ The most common way to use an abbrev is to insert it and then insert a punctuation or whitespace character to expand it. @vindex abbrev-all-caps - Abbrev expansion preserves case; thus, @samp{foo} expands into @samp{find -outer otter}; @samp{Foo} into @samp{Find outer otter}, and @samp{FOO} into -@samp{FIND OUTER OTTER} or @samp{Find Outer Otter} according to the -variable @code{abbrev-all-caps} (setting it non-@code{nil} specifies -@samp{FIND OUTER OTTER}). + Abbrev expansion preserves case: @samp{foo} expands to @samp{find +outer otter}, and @samp{Foo} to @samp{Find outer otter}. @samp{FOO} +expands to @samp{Find Outer Otter} by default, but if you change the +variable @code{abbrev-all-caps} to a non-@code{nil} value, it expands +to @samp{FIND OUTER OTTER}. These commands are used to control abbrev expansion: @@ -196,14 +189,14 @@ punctuation with @kbd{C-q}. Thus, @kbd{foo C-q ,} leaves @samp{foo,} in the buffer, not expanding it. @findex unexpand-abbrev - If you expand an abbrev by mistake, you can undo the expansion and -bring back the abbrev itself by typing @kbd{C-_} to undo (@pxref{Undo}). -This also undoes the insertion of the non-word character that expanded -the abbrev. If the result you want is the terminating non-word -character plus the unexpanded abbrev, you must reinsert the terminating -character, quoting it with @kbd{C-q}. You can also use the command -@kbd{M-x unexpand-abbrev} to cancel the last expansion without -deleting the terminating character. + If you expand an abbrev by mistake, you can undo the expansion by +typing @kbd{C-/} (@code{undo}). @xref{Undo}. This undoes the +insertion of the abbrev expansion and brings back the abbrev text. If +the result you want is the terminating non-word character plus the +unexpanded abbrev, you must reinsert the terminating character, +quoting it with @kbd{C-q}. You can also use the command @kbd{M-x +unexpand-abbrev} to cancel the last expansion without deleting the +terminating character. @findex expand-region-abbrevs @kbd{M-x expand-region-abbrevs} searches through the region for defined @@ -286,8 +279,6 @@ sessions. Write a file @var{file} describing all defined abbrevs. @item M-x read-abbrev-file @key{RET} @var{file} @key{RET} Read the file @var{file} and define abbrevs as specified therein. -@item M-x quietly-read-abbrev-file @key{RET} @var{file} @key{RET} -Similar but do not display a message about what is going on. @item M-x define-abbrevs Define abbrevs from definitions in current buffer. @item M-x insert-abbrevs @@ -411,12 +402,11 @@ you are expanding. @vindex dabbrev-case-fold-search This feature is controlled by the variable -@code{dabbrev-case-fold-search}. If it is @code{t}, case is ignored in -this search; if it is @code{nil}, the word and the expansion must match -in case. If the value of @code{dabbrev-case-fold-search} is -@code{case-fold-search}, which is true by default, then the variable -@code{case-fold-search} controls whether to ignore case while searching -for expansions. +@code{dabbrev-case-fold-search}. If it is @code{t}, case is ignored +in this search; if it is @code{nil}, the word and the expansion must +match in case. If the value is @code{case-fold-search} (the default), +then the variable @code{case-fold-search} controls whether to ignore +case while searching for expansions (@pxref{Search Case}). @vindex dabbrev-case-replace Normally, dynamic abbrev expansion preserves the case pattern @@ -427,10 +417,10 @@ expansion to that case pattern. The variable @code{dabbrev-case-replace} controls whether to preserve the case pattern of the dynamic abbrev. If it is @code{t}, the dynamic abbrev's case pattern is preserved in most cases; if it is -@code{nil}, the expansion is always copied verbatim. If the value of -@code{dabbrev-case-replace} is @code{case-replace}, which is true by -default, then the variable @code{case-replace} controls whether to -copy the expansion verbatim. +@code{nil}, the expansion is always copied verbatim. If the value is +@code{case-replace} (the default), then the variable +@code{case-replace} controls whether to copy the expansion verbatim +(@pxref{Replacement and Case}). However, if the expansion contains a complex mixed case pattern, and the dynamic abbrev matches this pattern as far as it goes, then the @@ -455,7 +445,3 @@ customize dynamic abbrev expansion to handle optional prefixes by setting the variable @code{dabbrev-abbrev-skip-leading-regexp}. Its value should be a regular expression that matches the optional prefix that dynamic abbrev expression should ignore. - -@ignore - arch-tag: 638e0079-9540-48ec-9166-414083e16445 -@end ignore