;;; simple.el --- basic editing commands for Emacs
-;; Copyright (C) 1985-1987, 1993-2011 Free Software Foundation, Inc.
+;; Copyright (C) 1985-1987, 1993-2012 Free Software Foundation, Inc.
;; Maintainer: FSF
;; Keywords: internal
;;; Code:
-(eval-when-compile (require 'cl)) ;For define-minor-mode.
-
(declare-function widget-convert "wid-edit" (type &rest args))
(declare-function shell-mode "shell" ())
(define-minor-mode next-error-follow-minor-mode
"Minor mode for compilation, occur and diff modes.
+With a prefix argument ARG, enable mode if ARG is positive, and
+disable it otherwise. If called from Lisp, enable mode if ARG is
+omitted or nil.
When turned on, cursor motion in the compilation, grep, occur or diff
-buffer causes automatic display of the corresponding source code
-location."
+buffer causes automatic display of the corresponding source code location."
:group 'next-error :init-value nil :lighter " Fol"
(if (not next-error-follow-minor-mode)
(remove-hook 'post-command-hook 'next-error-follow-mode-post-command-hook t)
Other major modes are defined by comparison with this one."
(interactive)
(kill-all-local-variables)
- (run-mode-hooks 'fundamental-mode-hook))
+ (unless delay-mode-hooks
+ (run-hooks 'after-change-major-mode-hook)))
;; Special major modes to view specially formatted data rather than files.
:type '(choice (const :tag "Delete active region" t)
(const :tag "Kill active region" kill)
(const :tag "Do ordinary deletion" nil))
- :group 'editing
+ :group 'killing
:version "24.1")
(defun delete-backward-char (n &optional killflag)
(defun mark-whole-buffer ()
"Put point at beginning and mark at end of buffer.
+If narrowing is in effect, only uses the accessible part of the buffer.
You probably should not use this function in Lisp programs;
it is usually a mistake for a Lisp function to use any subroutine
that uses or sets the mark."
;; Counting lines, one way or another.
(defun goto-line (line &optional buffer)
- "Goto LINE, counting from line 1 at beginning of buffer.
-Normally, move point in the current buffer, and leave mark at the
-previous position. With just \\[universal-argument] as argument,
-move point in the most recently selected other buffer, and switch to it.
+ "Go to LINE, counting from line 1 at beginning of buffer.
+If called interactively, a numeric prefix argument specifies
+LINE; without a numeric prefix argument, read LINE from the
+minibuffer.
+
+If optional argument BUFFER is non-nil, switch to that buffer and
+move to line LINE there. If called interactively with \\[universal-argument]
+as argument, BUFFER is the most recently selected other buffer.
-If there's a number in the buffer at point, it is the default for LINE.
+Prior to moving point, this function sets the mark (without
+activating it), unless Transient Mark mode is enabled and the
+mark is already active.
This function is usually the wrong thing to use in a Lisp program.
What you probably want instead is something like:
- (goto-char (point-min)) (forward-line (1- N))
+ (goto-char (point-min))
+ (forward-line (1- N))
If at all possible, an even better solution is to use char counts
rather than line counts."
(interactive
(forward-line (1- line)))))
(defun count-words-region (start end)
- "Count the number of words in the active region.
-If the region is not active, counts the number of words in the buffer."
- (interactive (if (use-region-p) (list (region-beginning) (region-end))
- (list (point-min) (point-max))))
- (let ((count 0))
- (save-excursion
- (save-restriction
- (narrow-to-region start end)
- (goto-char (point-min))
- (while (forward-word 1)
- (setq count (1+ count)))))
- (when (called-interactively-p 'interactive)
- (message "%s has %d words"
- (if (use-region-p) "Region" "Buffer")
- count))
- count))
-
-(defun count-lines-region (start end)
- "Print number of lines and characters in the region."
+ "Count the number of words in the region.
+If called interactively, print a message reporting the number of
+lines, words, and chars in the region.
+If called from Lisp, return the number of words between positions
+START and END."
(interactive "r")
- (message "Region has %d lines, %d characters"
- (count-lines start end) (- end start)))
+ (if (called-interactively-p 'any)
+ (count-words--message "Region" start end)
+ (count-words start end)))
+
+(defun count-words (start end)
+ "Count words between START and END.
+If called interactively, START and END are normally the start and
+end of the buffer; but if the region is active, START and END are
+the start and end of the region. Print a message reporting the
+number of lines, words, and chars.
+
+If called from Lisp, return the number of words between START and
+END, without printing any message."
+ (interactive (list nil nil))
+ (cond ((not (called-interactively-p 'any))
+ (let ((words 0))
+ (save-excursion
+ (save-restriction
+ (narrow-to-region start end)
+ (goto-char (point-min))
+ (while (forward-word 1)
+ (setq words (1+ words)))))
+ words))
+ ((use-region-p)
+ (call-interactively 'count-words-region))
+ (t
+ (count-words--message
+ (if (= (point-max) (1+ (buffer-size)))
+ "Buffer"
+ "Narrowed part of buffer")
+ (point-min) (point-max)))))
+
+(defun count-words--message (str start end)
+ (let ((lines (count-lines start end))
+ (words (count-words start end))
+ (chars (- end start)))
+ (message "%s has %d line%s, %d word%s, and %d character%s."
+ str
+ lines (if (= lines 1) "" "s")
+ words (if (= words 1) "" "s")
+ chars (if (= chars 1) "" "s"))))
+
+(define-obsolete-function-alias 'count-lines-region 'count-words-region "24.1")
(defun what-line ()
"Print the current buffer line number and narrowed line number of point."
in *Help* buffer. See also the command `describe-char'."
(interactive "P")
(let* ((char (following-char))
+ (bidi-fixer
+ (cond ((memq char '(?\x202a ?\x202b ?\x202d ?\x202e))
+ ;; If the character is one of LRE, LRO, RLE, RLO, it
+ ;; will start a directional embedding, which could
+ ;; completely disrupt the rest of the line (e.g., RLO
+ ;; will display the rest of the line right-to-left).
+ ;; So we put an invisible PDF character after these
+ ;; characters, to end the embedding, which eliminates
+ ;; any effects on the rest of the line.
+ (propertize (string ?\x202c) 'invisible t))
+ ;; Strong right-to-left characters cause reordering of
+ ;; the following numerical characters which show the
+ ;; codepoint, so append LRM to countermand that.
+ ((memq (get-char-code-property char 'bidi-class) '(R AL))
+ (propertize (string ?\x200e) 'invisible t))
+ (t
+ "")))
(beg (point-min))
(end (point-max))
(pos (point))
;; We show the detailed information about CHAR.
(describe-char (point)))
(if (or (/= beg 1) (/= end (1+ total)))
- (message "Char: %s %s point=%d of %d (%d%%) <%d-%d> column=%d%s"
+ (message "Char: %s%s %s point=%d of %d (%d%%) <%d-%d> column=%d%s"
(if (< char 256)
(single-key-description char)
(buffer-substring-no-properties (point) (1+ (point))))
+ bidi-fixer
encoding-msg pos total percent beg end col hscroll)
- (message "Char: %s %s point=%d of %d (%d%%) column=%d%s"
+ (message "Char: %s%s %s point=%d of %d (%d%%) column=%d%s"
(if enable-multibyte-characters
(if (< char 128)
(single-key-description char)
(buffer-substring-no-properties (point) (1+ (point))))
(single-key-description char))
- encoding-msg pos total percent col hscroll))))))
+ bidi-fixer encoding-msg pos total percent col hscroll))))))
\f
;; Initialize read-expression-map. It is defined at C level.
(let ((m (make-sparse-keymap)))
(push (eval eval-expression-arg lexical-binding) values)
(let ((old-value (make-symbol "t")) new-value)
;; Bind debug-on-error to something unique so that we can
- ;; detect when evaled code changes it.
+ ;; detect when evalled code changes it.
(let ((debug-on-error old-value))
(push (eval eval-expression-arg lexical-binding) values)
(setq new-value debug-on-error))
- ;; If evaled code has changed the value of debug-on-error,
+ ;; If evalled code has changed the value of debug-on-error,
;; propagate that change to the global binding.
(unless (eq old-value new-value)
(setq debug-on-error new-value))))
"M-x ")
obarray 'commandp t nil 'extended-command-history)))
+(defcustom suggest-key-bindings t
+ "Non-nil means show the equivalent key-binding when M-x command has one.
+The value can be a length of time to show the message for.
+If the value is non-nil and not a number, we wait 2 seconds."
+ :group 'keyboard
+ :type '(choice (const :tag "off" nil)
+ (integer :tag "time" 2)
+ (other :tag "on")))
+
+(defun execute-extended-command (prefixarg &optional command-name)
+ ;; Based on Fexecute_extended_command in keyboard.c of Emacs.
+ ;; Aaron S. Hawley <aaron.s.hawley(at)gmail.com> 2009-08-24
+ "Read function name, then read its arguments and call it.
+
+To pass a numeric argument to the command you are invoking with, specify
+the numeric argument to this command.
+
+Noninteractively, the argument PREFIXARG is the prefix argument to
+give to the command you invoke, if it asks for an argument."
+ (interactive (list current-prefix-arg (read-extended-command)))
+ ;; Emacs<24 calling-convention was with a single `prefixarg' argument.
+ (if (null command-name) (setq command-name (read-extended-command)))
+ (let* ((function (and (stringp command-name) (intern-soft command-name)))
+ (binding (and suggest-key-bindings
+ (not executing-kbd-macro)
+ (where-is-internal function overriding-local-map t))))
+ (unless (commandp function)
+ (error "`%s' is not a valid command name" command-name))
+ (setq this-command function)
+ ;; Normally `real-this-command' should never be changed, but here we really
+ ;; want to pretend that M-x <cmd> RET is nothing more than a "key
+ ;; binding" for <cmd>, so the command the user really wanted to run is
+ ;; `function' and not `execute-extended-command'. The difference is
+ ;; visible in cases such as M-x <cmd> RET and then C-x z (bug#11506).
+ (setq real-this-command function)
+ (let ((prefix-arg prefixarg))
+ (command-execute function 'record))
+ ;; If enabled, show which key runs this command.
+ (when binding
+ ;; But first wait, and skip the message if there is input.
+ (let* ((waited
+ ;; If this command displayed something in the echo area;
+ ;; wait a few seconds, then display our suggestion message.
+ (sit-for (cond
+ ((zerop (length (current-message))) 0)
+ ((numberp suggest-key-bindings) suggest-key-bindings)
+ (t 2)))))
+ (when (and waited (not (consp unread-command-events)))
+ (with-temp-message
+ (format "You can run the command `%s' with %s"
+ function (key-description binding))
+ (sit-for (if (numberp suggest-key-bindings)
+ suggest-key-bindings
+ 2))))))))
\f
(defvar minibuffer-history nil
"Default minibuffer history list.
(list (if (string= regexp "")
(if minibuffer-history-search-history
(car minibuffer-history-search-history)
- (error "No previous history search regexp"))
+ (user-error "No previous history search regexp"))
regexp)
(prefix-numeric-value current-prefix-arg))))
(unless (zerop n)
(setq prevpos pos)
(setq pos (min (max 1 (+ pos (if (< n 0) -1 1))) (length history)))
(when (= pos prevpos)
- (error (if (= pos 1)
- "No later matching history item"
- "No earlier matching history item")))
+ (user-error (if (= pos 1)
+ "No later matching history item"
+ "No earlier matching history item")))
(setq match-string
(if (eq minibuffer-history-sexp-flag (minibuffer-depth))
(let ((print-level nil))
(list (if (string= regexp "")
(if minibuffer-history-search-history
(car minibuffer-history-search-history)
- (error "No previous history search regexp"))
+ (user-error "No previous history search regexp"))
regexp)
(prefix-numeric-value current-prefix-arg))))
(previous-matching-history-element regexp (- n)))
(setq minibuffer-text-before-history
(minibuffer-contents-no-properties)))
(if (< nabs minimum)
- (if minibuffer-default
- (error "End of defaults; no next item")
- (error "End of history; no default available")))
+ (user-error (if minibuffer-default
+ "End of defaults; no next item"
+ "End of history; no default available")))
(if (> nabs (length (symbol-value minibuffer-history-variable)))
- (error "Beginning of history; no preceding item"))
+ (user-error "Beginning of history; no preceding item"))
(unless (memq last-command '(next-history-element
previous-history-element))
(let ((prompt-end (minibuffer-prompt-end)))
n)
;; next-matching-history-element always puts us at (point-min).
;; Move to the position we were at before changing the buffer contents.
- ;; This is still sensical, because the text before point has not changed.
+ ;; This is still sensible, because the text before point has not changed.
(goto-char point-at-start)))
(defun previous-complete-history-element (n)
(defun minibuffer-history-isearch-search ()
"Return the proper search function, for isearch in minibuffer history."
- (cond
- (isearch-word
- (if isearch-forward 'word-search-forward 'word-search-backward))
- (t
- (lambda (string bound noerror)
- (let ((search-fun
- ;; Use standard functions to search within minibuffer text
- (cond
- (isearch-regexp
- (if isearch-forward 're-search-forward 're-search-backward))
- (t
- (if isearch-forward 'search-forward 'search-backward))))
- found)
- ;; Avoid lazy-highlighting matches in the minibuffer prompt when
- ;; searching forward. Lazy-highlight calls this lambda with the
- ;; bound arg, so skip the minibuffer prompt.
- (if (and bound isearch-forward (< (point) (minibuffer-prompt-end)))
- (goto-char (minibuffer-prompt-end)))
- (or
- ;; 1. First try searching in the initial minibuffer text
- (funcall search-fun string
- (if isearch-forward bound (minibuffer-prompt-end))
- noerror)
- ;; 2. If the above search fails, start putting next/prev history
- ;; elements in the minibuffer successively, and search the string
- ;; in them. Do this only when bound is nil (i.e. not while
- ;; lazy-highlighting search strings in the current minibuffer text).
- (unless bound
- (condition-case nil
- (progn
- (while (not found)
- (cond (isearch-forward
- (next-history-element 1)
- (goto-char (minibuffer-prompt-end)))
- (t
- (previous-history-element 1)
- (goto-char (point-max))))
- (setq isearch-barrier (point) isearch-opoint (point))
- ;; After putting the next/prev history element, search
- ;; the string in them again, until next-history-element
- ;; or previous-history-element raises an error at the
- ;; beginning/end of history.
- (setq found (funcall search-fun string
- (unless isearch-forward
- ;; For backward search, don't search
- ;; in the minibuffer prompt
- (minibuffer-prompt-end))
- noerror)))
- ;; Return point of the new search result
- (point))
- ;; Return nil when next(prev)-history-element fails
- (error nil)))))))))
+ (lambda (string bound noerror)
+ (let ((search-fun
+ ;; Use standard functions to search within minibuffer text
+ (isearch-search-fun-default))
+ found)
+ ;; Avoid lazy-highlighting matches in the minibuffer prompt when
+ ;; searching forward. Lazy-highlight calls this lambda with the
+ ;; bound arg, so skip the minibuffer prompt.
+ (if (and bound isearch-forward (< (point) (minibuffer-prompt-end)))
+ (goto-char (minibuffer-prompt-end)))
+ (or
+ ;; 1. First try searching in the initial minibuffer text
+ (funcall search-fun string
+ (if isearch-forward bound (minibuffer-prompt-end))
+ noerror)
+ ;; 2. If the above search fails, start putting next/prev history
+ ;; elements in the minibuffer successively, and search the string
+ ;; in them. Do this only when bound is nil (i.e. not while
+ ;; lazy-highlighting search strings in the current minibuffer text).
+ (unless bound
+ (condition-case nil
+ (progn
+ (while (not found)
+ (cond (isearch-forward
+ (next-history-element 1)
+ (goto-char (minibuffer-prompt-end)))
+ (t
+ (previous-history-element 1)
+ (goto-char (point-max))))
+ (setq isearch-barrier (point) isearch-opoint (point))
+ ;; After putting the next/prev history element, search
+ ;; the string in them again, until next-history-element
+ ;; or previous-history-element raises an error at the
+ ;; beginning/end of history.
+ (setq found (funcall search-fun string
+ (unless isearch-forward
+ ;; For backward search, don't search
+ ;; in the minibuffer prompt
+ (minibuffer-prompt-end))
+ noerror)))
+ ;; Return point of the new search result
+ (point))
+ ;; Return nil when next(prev)-history-element fails
+ (error nil)))))))
(defun minibuffer-history-isearch-message (&optional c-q-hack ellipsis)
"Display the minibuffer history search prompt.
"Wrap the minibuffer history search when search fails.
Move point to the first history element for a forward search,
or to the last history element for a backward search."
- (unless isearch-word
- ;; When `minibuffer-history-isearch-search' fails on reaching the
- ;; beginning/end of the history, wrap the search to the first/last
- ;; minibuffer history element.
- (if isearch-forward
- (goto-history-element (length (symbol-value minibuffer-history-variable)))
- (goto-history-element 0))
- (setq isearch-success t))
+ ;; When `minibuffer-history-isearch-search' fails on reaching the
+ ;; beginning/end of the history, wrap the search to the first/last
+ ;; minibuffer history element.
+ (if isearch-forward
+ (goto-history-element (length (symbol-value minibuffer-history-variable)))
+ (goto-history-element 0))
+ (setq isearch-success t)
(goto-char (if isearch-forward (minibuffer-prompt-end) (point-max))))
(defun minibuffer-history-isearch-push-state ()
Call `undo-start' to get ready to undo recent changes,
then call `undo-more' one or more times to undo them."
(or (listp pending-undo-list)
- (error (concat "No further undo information"
- (and undo-in-region " for region"))))
+ (user-error (concat "No further undo information"
+ (and undo-in-region " for region"))))
(let ((undo-in-progress t))
;; Note: The following, while pulling elements off
;; `pending-undo-list' will call primitive change functions which
that apply to text between BEG and END are used; other undo elements
are ignored. If BEG and END are nil, all undo elements are used."
(if (eq buffer-undo-list t)
- (error "No undo information in this buffer"))
+ (user-error "No undo information in this buffer"))
(setq pending-undo-list
(if (and beg end (not (= beg end)))
(undo-make-selective-list (min beg end) (max beg end))
"Switch used to have the shell execute its command line argument.")
(defvar shell-command-default-error-buffer nil
- "*Buffer name for `shell-command' and `shell-command-on-region' error output.
+ "Buffer name for `shell-command' and `shell-command-on-region' error output.
This buffer is used when `shell-command' or `shell-command-on-region'
is run interactively. A value of nil means that output to stderr and
stdout will be intermixed in the output stream.")
(defun async-shell-command (command &optional output-buffer error-buffer)
"Execute string COMMAND asynchronously in background.
-Like `shell-command' but if COMMAND doesn't end in ampersand, adds `&'
-surrounded by whitespace and executes the command asynchronously.
+Like `shell-command', but adds `&' at the end of COMMAND
+to execute it asynchronously.
+
The output appears in the buffer `*Async Shell Command*'.
+That buffer is in shell mode.
In Elisp, you will often be better served by calling `start-process'
directly, since it offers more control and does not impose the use of a
(interactive
(list
(read-shell-command "Async shell command: " nil nil
- (and buffer-file-name
- (file-relative-name buffer-file-name)))
+ (let ((filename
+ (cond
+ (buffer-file-name)
+ ((eq major-mode 'dired-mode)
+ (dired-get-filename nil t)))))
+ (and filename (file-relative-name filename))))
current-prefix-arg
shell-command-default-error-buffer))
(unless (string-match "&[ \t]*\\'" command)
"Execute string COMMAND in inferior shell; display output, if any.
With prefix argument, insert the COMMAND's output at point.
-If COMMAND ends in ampersand, execute it asynchronously.
+If COMMAND ends in `&', execute it asynchronously.
The output appears in the buffer `*Async Shell Command*'.
-That buffer is in shell mode.
+That buffer is in shell mode. You can also use
+`async-shell-command' that automatically adds `&'.
Otherwise, COMMAND is executed synchronously. The output appears in
the buffer `*Shell Command Output*'. If the output is short enough to
1))
1)))
;; Don't use the echo area if the output buffer is
- ;; already dispayed in the selected frame.
+ ;; already displayed in the selected frame.
(not (get-buffer-window (current-buffer))))
;; Echo area
(goto-char (point-max))
To specify a coding system for converting non-ASCII characters
in the input and output to the shell command, use \\[universal-coding-system-argument]
before this command. By default, the input (from the current buffer)
-is encoded in the same coding system that will be used to save the file,
-`buffer-file-coding-system'. If the output is going to replace the region,
-then it is decoded from that same coding system.
+is encoded using coding-system specified by `process-coding-system-alist',
+falling back to `default-process-coding-system' if no match for COMMAND
+is found in `process-coding-system-alist'.
The noninteractive arguments are START, END, COMMAND,
OUTPUT-BUFFER, REPLACE, ERROR-BUFFER, and DISPLAY-ERROR-BUFFER.
(defvar process-file-side-effects t
"Whether a call of `process-file' changes remote files.
-Per default, this variable is always set to `t', meaning that a
+By default, this variable is always set to `t', meaning that a
call of `process-file' could potentially change any file on a
remote host. When set to `nil', a file handler could optimize
-its behaviour with respect to remote file attributes caching.
+its behavior with respect to remote file attribute caching.
-This variable should never be changed by `setq'. Instead of, it
-shall be set only by let-binding.")
+You should only ever change this variable with a let-binding;
+never with `setq'.")
(defun start-file-process (name buffer program &rest program-args)
"Start a program in a subprocess. Return the process object for it.
(tabulated-list-init-header))
(defun list-processes--refresh ()
- "Recompute the list of processes for the Process List buffer."
+ "Recompute the list of processes for the Process List buffer.
+Also, delete any process that is exited or signaled."
(setq tabulated-list-entries nil)
(dolist (p (process-list))
- (when (or (not process-menu-query-only)
- (process-query-on-exit-flag p))
- (let* ((buf (process-buffer p))
- (type (process-type p))
- (name (process-name p))
- (status (symbol-name (process-status p)))
- (buf-label (if (buffer-live-p buf)
- `(,(buffer-name buf)
- face link
- help-echo ,(concat "Visit buffer `"
- (buffer-name buf) "'")
- follow-link t
- process-buffer ,buf
- action process-menu-visit-buffer)
- "--"))
- (tty (or (process-tty-name p) "--"))
- (cmd
- (if (memq type '(network serial))
- (let ((contact (process-contact p t)))
- (if (eq type 'network)
- (format "(%s %s)"
- (if (plist-get contact :type)
- "datagram"
- "network")
- (if (plist-get contact :server)
- (format "server on %s"
- (plist-get contact :server))
- (format "connection to %s"
- (plist-get contact :host))))
- (format "(serial port %s%s)"
- (or (plist-get contact :port) "?")
- (let ((speed (plist-get contact :speed)))
- (if speed
- (format " at %s b/s" speed)
- "")))))
- (mapconcat 'identity (process-command p) " "))))
- (push (list p (vector name status buf-label tty cmd))
- tabulated-list-entries)))))
+ (cond ((memq (process-status p) '(exit signal closed))
+ (delete-process p))
+ ((or (not process-menu-query-only)
+ (process-query-on-exit-flag p))
+ (let* ((buf (process-buffer p))
+ (type (process-type p))
+ (name (process-name p))
+ (status (symbol-name (process-status p)))
+ (buf-label (if (buffer-live-p buf)
+ `(,(buffer-name buf)
+ face link
+ help-echo ,(concat "Visit buffer `"
+ (buffer-name buf) "'")
+ follow-link t
+ process-buffer ,buf
+ action process-menu-visit-buffer)
+ "--"))
+ (tty (or (process-tty-name p) "--"))
+ (cmd
+ (if (memq type '(network serial))
+ (let ((contact (process-contact p t)))
+ (if (eq type 'network)
+ (format "(%s %s)"
+ (if (plist-get contact :type)
+ "datagram"
+ "network")
+ (if (plist-get contact :server)
+ (format "server on %s"
+ (plist-get contact :server))
+ (format "connection to %s"
+ (plist-get contact :host))))
+ (format "(serial port %s%s)"
+ (or (plist-get contact :port) "?")
+ (let ((speed (plist-get contact :speed)))
+ (if speed
+ (format " at %s b/s" speed)
+ "")))))
+ (mapconcat 'identity (process-command p) " "))))
+ (push (list p (vector name status buf-label tty cmd))
+ tabulated-list-entries))))))
(defun process-menu-visit-buffer (button)
(display-buffer (button-get button 'process-buffer)))
\f
(defvar filter-buffer-substring-functions nil
- "Wrapper hook around `filter-buffer-substring'.
-The functions on this special hook are called with 4 arguments:
- NEXT-FUN BEG END DELETE
-NEXT-FUN is a function of 3 arguments (BEG END DELETE)
-that performs the default operation. The other 3 arguments are like
-the ones passed to `filter-buffer-substring'.")
+ "This variable is a wrapper hook around `filter-buffer-substring'.
+Each member of the hook should be a function accepting four arguments:
+\(FUN BEG END DELETE), where FUN is itself a function of three arguments
+\(BEG END DELETE). The arguments BEG, END, and DELETE are the same
+as those of `filter-buffer-substring' in each case.
+
+The first hook function to be called receives a FUN equivalent
+to the default operation of `filter-buffer-substring',
+i.e. one that returns the buffer-substring between BEG and
+END (processed by any `buffer-substring-filters'). Normally,
+the hook function will call FUN and then do its own processing
+of the result. The next hook function receives a FUN equivalent
+to the previous hook function, calls it, and does its own
+processing, and so on. The overall result is that of all hook
+functions acting in sequence.
+
+Any hook may choose not to call FUN though, in which case it
+effectively replaces the default behavior with whatever it chooses.
+Of course, a later hook function may do the same thing.")
(defvar buffer-substring-filters nil
"List of filter functions for `filter-buffer-substring'.
Each function must accept a single argument, a string, and return
a string. The buffer substring is passed to the first function
in the list, and the return value of each function is passed to
-the next. The return value of the last function is used as the
-return value of `filter-buffer-substring'.
+the next. The final result (if `buffer-substring-filters' is
+nil, this is the unfiltered buffer-substring) is passed to the
+first function on `filter-buffer-substring-functions'.
-If this variable is nil, no filtering is performed.")
+As a special convention, point is set to the start of the buffer text
+being operated on (i.e., the first argument of `filter-buffer-substring')
+before these functions are called.")
(make-obsolete-variable 'buffer-substring-filters
'filter-buffer-substring-functions "24.1")
(defun filter-buffer-substring (beg end &optional delete)
"Return the buffer substring between BEG and END, after filtering.
-The filtering is performed by `filter-buffer-substring-functions'.
+The wrapper hook `filter-buffer-substring-functions' performs
+the actual filtering. The obsolete variable `buffer-substring-filters'
+is also consulted. If both of these are nil, no filtering is done.
If DELETE is non-nil, the text between BEG and END is deleted
from the buffer.
(defvar interprogram-cut-function nil
"Function to call to make a killed region available to other programs.
+Most window systems provide a facility for cutting and pasting
+text between different programs, such as the clipboard on X and
+MS-Windows, or the pasteboard on Nextstep/Mac OS.
-Most window systems provide some sort of facility for cutting and
-pasting text between the windows of different programs.
-This variable holds a function that Emacs calls whenever text
-is put in the kill ring, to make the new kill available to other
-programs.
-
-The function takes one argument, TEXT, which is a string containing
-the text which should be made available.")
+This variable holds a function that Emacs calls whenever text is
+put in the kill ring, to make the new kill available to other
+programs. The function takes one argument, TEXT, which is a
+string containing the text which should be made available.")
(defvar interprogram-paste-function nil
"Function to call to get text cut from other programs.
-
-Most window systems provide some sort of facility for cutting and
-pasting text between the windows of different programs.
-This variable holds a function that Emacs calls to obtain
-text that other programs have provided for pasting.
-
-The function should be called with no arguments. If the function
-returns nil, then no other program has provided such text, and the top
-of the Emacs kill ring should be used. If the function returns a
-string, then the caller of the function \(usually `current-kill')
-should put this string in the kill ring as the latest kill.
-
-This function may also return a list of strings if the window
+Most window systems provide a facility for cutting and pasting
+text between different programs, such as the clipboard on X and
+MS-Windows, or the pasteboard on Nextstep/Mac OS.
+
+This variable holds a function that Emacs calls to obtain text
+that other programs have provided for pasting. The function is
+called with no arguments. If no other program has provided text
+to paste, the function should return nil (in which case the
+caller, usually `current-kill', should use the top of the Emacs
+kill ring). If another program has provided text to paste, the
+function should return that text as a string (in which case the
+caller should put this string in the kill ring as the latest
+kill).
+
+The function may also return a list of strings if the window
system supports multiple selections. The first string will be
-used as the pasted text, but the other will be placed in the
-kill ring for easy access via `yank-pop'.
-
-Note that the function should return a string only if a program other
-than Emacs has provided a string for pasting; if Emacs provided the
-most recent string, the function should return nil. If it is
-difficult to tell whether Emacs or some other program provided the
-current string, it is probably good enough to return nil if the string
-is equal (according to `string=') to the last text Emacs provided.")
+used as the pasted text, but the other will be placed in the kill
+ring for easy access via `yank-pop'.
+
+Note that the function should return a string only if a program
+other than Emacs has provided a string for pasting; if Emacs
+provided the most recent string, the function should return nil.
+If it is difficult to tell whether Emacs or some other program
+provided the current string, it is probably good enough to return
+nil if the string is equal (according to `string=') to the last
+text Emacs provided.")
\f
:version "23.2")
(defcustom kill-do-not-save-duplicates nil
- "Do not add a new string to `kill-ring' when it is the same as the last one."
+ "Do not add a new string to `kill-ring' if it duplicates the last one.
+The comparison is done using `equal-including-properties'."
:type 'boolean
:group 'killing
:version "23.2")
(signal 'args-out-of-range
(list string "yank-handler specified for empty string"))))
(unless (and kill-do-not-save-duplicates
- (equal string (car kill-ring)))
+ ;; Due to text properties such as 'yank-handler that
+ ;; can alter the contents to yank, comparison using
+ ;; `equal' is unsafe.
+ (equal-including-properties string (car kill-ring)))
(if (fboundp 'menu-bar-update-yank-menu)
(menu-bar-update-yank-menu string (and replace (car kill-ring)))))
(when save-interprogram-paste-before-kill
(nreverse interprogram-paste)
(list interprogram-paste)))
(unless (and kill-do-not-save-duplicates
- (equal s (car kill-ring)))
+ (equal-including-properties s (car kill-ring)))
(push s kill-ring))))))
(unless (and kill-do-not-save-duplicates
- (equal string (car kill-ring)))
+ (equal-including-properties string (car kill-ring)))
(if (and replace kill-ring)
(setcar kill-ring string)
(push string kill-ring)
(set-advertised-calling-convention 'kill-append '(string before-p) "23.3")
(defcustom yank-pop-change-selection nil
- "If non-nil, rotating the kill ring changes the window system selection."
+ "Whether rotating the kill ring changes the window system selection.
+If non-nil, whenever the kill ring is rotated (usually via the
+`yank-pop' command), Emacs also calls `interprogram-cut-function'
+to copy the new kill to the window system selection."
:type 'boolean
:group 'killing
:version "23.1")
:type 'boolean
:group 'killing)
-(put 'text-read-only 'error-conditions
- '(text-read-only buffer-read-only error))
-(put 'text-read-only 'error-message (purecopy "Text is read-only"))
-
(defun kill-region (beg end &optional yank-handler)
"Kill (\"cut\") text between point and mark.
This deletes the text from the buffer and saves it in the kill ring.
((eq backward-delete-char-untabify-method 'all)
" \t\n\r")))
(n (if skip
- (let ((wh (- (point) (save-excursion (skip-chars-backward skip)
- (point)))))
+ (let* ((oldpt (point))
+ (wh (- oldpt (save-excursion
+ (skip-chars-backward skip)
+ (constrain-to-field nil oldpt)))))
(+ arg (if (zerop wh) 0 (1- wh))))
arg)))
;; Avoid warning about delete-backward-char
"Kill up to and including ARGth occurrence of CHAR.
Case is ignored if `case-fold-search' is non-nil in the current buffer.
Goes backward if ARG is negative; error if CHAR not found."
- (interactive "p\ncZap to char: ")
+ (interactive (list (prefix-numeric-value current-prefix-arg)
+ (read-char "Zap to char: " t)))
;; Avoid "obsolete" warnings for translation-table-for-input.
(with-no-warnings
(if (char-table-p translation-table-for-input)
(setq char (or (aref translation-table-for-input char) char))))
(kill-region (point) (progn
(search-forward (char-to-string char) nil nil arg)
-; (goto-char (if (> arg 0) (1- (point)) (1+ (point))))
(point))))
;; kill-line and its subroutines.
(defcustom kill-whole-line nil
- "If non-nil, `kill-line' with no arg at beg of line kills the whole line."
+ "If non-nil, `kill-line' with no arg at start of line kills the whole line."
:type 'boolean
:group 'killing)
(assq prop buffer-invisibility-spec))))))
(skip-chars-forward "^\n")
(if (get-text-property (point) 'invisible)
- (goto-char (next-single-property-change (point) 'invisible))
+ (goto-char (or (next-single-property-change (point) 'invisible)
+ (point-max)))
(goto-char (next-overlay-change (point))))
(end-of-line)))
\f
(signal 'mark-inactive nil)))
(defsubst deactivate-mark (&optional force)
- "Deactivate the mark by setting `mark-active' to nil.
-Unless FORCE is non-nil, this function does nothing if Transient
-Mark mode is disabled.
-This function also runs `deactivate-mark-hook'."
+ "Deactivate the mark.
+If Transient Mark mode is disabled, this function normally does
+nothing; but if FORCE is non-nil, it deactivates the mark anyway.
+
+Deactivating the mark sets `mark-active' to nil, updates the
+primary selection according to `select-active-regions', and runs
+`deactivate-mark-hook'.
+
+If Transient Mark mode was temporarily enabled, reset the value
+of the variable `transient-mark-mode'; if this causes Transient
+Mark mode to be disabled, don't change `mark-active' to nil or
+run `deactivate-mark-hook'."
(when (or transient-mark-mode force)
(when (and (if (eq select-active-regions 'only)
(eq (car-safe transient-mark-mode) 'only)
(cond (saved-region-selection
(x-set-selection 'PRIMARY saved-region-selection)
(setq saved-region-selection nil))
- ((/= (region-beginning) (region-end))
+ ;; If another program has acquired the selection, region
+ ;; deactivation should not clobber it (Bug#11772).
+ ((and (/= (region-beginning) (region-end))
+ (or (x-selection-owner-p 'PRIMARY)
+ (null (x-selection-exists-p 'PRIMARY))))
(x-set-selection 'PRIMARY
(buffer-substring-no-properties
(region-beginning)
(define-minor-mode transient-mark-mode
"Toggle Transient Mark mode.
-With ARG, turn Transient Mark mode on if ARG is positive, off otherwise.
+With a prefix argument ARG, enable Transient Mark mode if ARG is
+positive, and disable it otherwise. If called from Lisp, enable
+Transient Mark mode if ARG is omitted or nil.
-In Transient Mark mode, when the mark is active, the region is highlighted.
-Changing the buffer \"deactivates\" the mark.
-So do certain other operations that set the mark
-but whose main purpose is something else--for example,
-incremental search, \\[beginning-of-buffer], and \\[end-of-buffer].
+Transient Mark mode is a global minor mode. When enabled, the
+region is highlighted whenever the mark is active. The mark is
+\"deactivated\" by changing the buffer, and after certain other
+operations that set the mark but whose main purpose is something
+else--for example, incremental search, \\[beginning-of-buffer], and \\[end-of-buffer].
You can also deactivate the mark by typing \\[keyboard-quit] or
\\[keyboard-escape-quit].
If nil, `line-move' moves point by logical lines.
A non-nil setting of `goal-column' overrides the value of this variable
and forces movement by logical lines.
-Disabling `auto-hscroll-mode' also overrides forces movement by logical
-lines when the window is horizontally scrolled."
+A window that is horizontally scrolled also forces movement by logical
+lines."
:type 'boolean
:group 'editing-basics
:version "23.1")
(when (> rbot 0)
(set-window-vscroll nil (+ vs (min rbot (frame-char-height))) t)))
;; If cursor just entered the bottom scroll margin, move forward,
- ;; but also vscroll one line so redisplay wont recenter.
+ ;; but also vscroll one line so redisplay won't recenter.
((and (> vpos 0)
(= py (min (- (window-text-height) scroll-margin 1)
(1- vpos))))
;; a cleaner solution to the problem of making C-n do something
;; useful given a tall image.
(defun line-move (arg &optional noerror to-end try-vscroll)
- (unless (and auto-window-vscroll try-vscroll
- ;; Only vscroll for single line moves
- (= (abs arg) 1)
- ;; But don't vscroll in a keyboard macro.
- (not defining-kbd-macro)
- (not executing-kbd-macro)
- (line-move-partial arg noerror to-end))
- (set-window-vscroll nil 0 t)
- (if (and line-move-visual
- ;; Display-based column are incompatible with goal-column.
- (not goal-column)
- ;; When auto-hscroll-mode is turned off and the text in
- ;; the window is scrolled to the left, display-based
- ;; motion doesn't make sense (because each logical line
- ;; occupies exactly one screen line).
- (not (and (null auto-hscroll-mode)
- (> (window-hscroll) 0))))
- (line-move-visual arg noerror)
- (line-move-1 arg noerror to-end))))
+ (if noninteractive
+ (forward-line arg)
+ (unless (and auto-window-vscroll try-vscroll
+ ;; Only vscroll for single line moves
+ (= (abs arg) 1)
+ ;; But don't vscroll in a keyboard macro.
+ (not defining-kbd-macro)
+ (not executing-kbd-macro)
+ (line-move-partial arg noerror to-end))
+ (set-window-vscroll nil 0 t)
+ (if (and line-move-visual
+ ;; Display-based column are incompatible with goal-column.
+ (not goal-column)
+ ;; When the text in the window is scrolled to the left,
+ ;; display-based motion doesn't make sense (because each
+ ;; logical line occupies exactly one screen line).
+ (not (> (window-hscroll) 0)))
+ (line-move-visual arg noerror)
+ (line-move-1 arg noerror to-end)))))
;; Display-based alternative to line-move-1.
;; Arg says how many lines to move. The value is t if we can move the
(let ((line-move-visual nil))
(line-move (1- arg) t)))
- ;; Move to beginning-of-line, ignoring fields and invisibles.
+ ;; Move to beginning-of-line, ignoring fields and invisible text.
(skip-chars-backward "^\n")
(while (and (not (bobp)) (invisible-p (1- (point))))
(goto-char (previous-char-property-change (point)))
(defvar visual-line--saved-state nil)
(define-minor-mode visual-line-mode
- "Redefine simple editing commands to act on visual lines, not logical lines.
-This also turns on `word-wrap' in the buffer."
+ "Toggle visual line based editing (Visual Line mode).
+With a prefix argument ARG, enable Visual Line mode if ARG is
+positive, and disable it otherwise. If called from Lisp, enable
+the mode if ARG is omitted or nil.
+
+When Visual Line mode is enabled, `word-wrap' is turned on in
+this buffer, and simple editing commands are redefined to act on
+visual lines, not logical lines. See Info node `Visual Line
+Mode' for details."
:keymap visual-line-mode-map
:group 'visual-line
:lighter " Wrap"
t)))
(defvar comment-line-break-function 'comment-indent-new-line
- "*Mode-specific function which line breaks and continues a comment.
+ "Mode-specific function which line breaks and continues a comment.
This function is called during auto-filling when a comment syntax
is defined.
The function should take a single optional argument, which is a flag
(put 'auto-fill-function 'safe-local-variable 'null)
(define-minor-mode auto-fill-mode
- "Toggle Auto Fill mode.
-With ARG, turn Auto Fill mode on if and only if ARG is positive.
-In Auto Fill mode, inserting a space at a column beyond `current-fill-column'
-automatically breaks the line at a previous space.
+ "Toggle automatic line breaking (Auto Fill mode).
+With a prefix argument ARG, enable Auto Fill mode if ARG is
+positive, and disable it otherwise. If called from Lisp, enable
+the mode if ARG is omitted or nil.
+
+When Auto Fill mode is enabled, inserting a space at a column
+beyond `current-fill-column' automatically breaks the line at a
+previous space.
When `auto-fill-mode' is on, the `auto-fill-function' variable is
non-`nil'.
The value of `normal-auto-fill-function' specifies the function to use
for `auto-fill-function' when turning Auto Fill mode on."
- :variable (eq auto-fill-function normal-auto-fill-function))
+ :variable (auto-fill-function
+ . (lambda (v) (setq auto-fill-function
+ (if v normal-auto-fill-function)))))
;; This holds a document string used to document auto-fill-mode.
(defun auto-fill-function ()
"The string displayed in the mode line when in binary overwrite mode.")
(define-minor-mode overwrite-mode
- "Toggle overwrite mode.
-With prefix argument ARG, turn overwrite mode on if ARG is positive,
-otherwise turn it off. In overwrite mode, printing characters typed
-in replace existing text on a one-for-one basis, rather than pushing
-it to the right. At the end of a line, such characters extend the line.
-Before a tab, such characters insert until the tab is filled in.
-\\[quoted-insert] still inserts characters in overwrite mode; this
-is supposed to make it easier to insert characters when necessary."
- :variable (eq overwrite-mode 'overwrite-mode-textual))
+ "Toggle Overwrite mode.
+With a prefix argument ARG, enable Overwrite mode if ARG is
+positive, and disable it otherwise. If called from Lisp, enable
+the mode if ARG is omitted or nil.
+
+When Overwrite mode is enabled, printing characters typed in
+replace existing text on a one-for-one basis, rather than pushing
+it to the right. At the end of a line, such characters extend
+the line. Before a tab, such characters insert until the tab is
+filled in. \\[quoted-insert] still inserts characters in
+overwrite mode; this is supposed to make it easier to insert
+characters when necessary."
+ :variable (overwrite-mode
+ . (lambda (v) (setq overwrite-mode (if v 'overwrite-mode-textual)))))
(define-minor-mode binary-overwrite-mode
- "Toggle binary overwrite mode.
-With prefix argument ARG, turn binary overwrite mode on if ARG is
-positive, otherwise turn it off. In binary overwrite mode, printing
-characters typed in replace existing text. Newlines are not treated
-specially, so typing at the end of a line joins the line to the next,
-with the typed character between them. Typing before a tab character
-simply replaces the tab with the character typed. \\[quoted-insert]
-replaces the text at the cursor, just as ordinary typing characters do.
-
-Note that binary overwrite mode is not its own minor mode; it is a
-specialization of overwrite mode, entered by setting the
+ "Toggle Binary Overwrite mode.
+With a prefix argument ARG, enable Binary Overwrite mode if ARG
+is positive, and disable it otherwise. If called from Lisp,
+enable the mode if ARG is omitted or nil.
+
+When Binary Overwrite mode is enabled, printing characters typed
+in replace existing text. Newlines are not treated specially, so
+typing at the end of a line joins the line to the next, with the
+typed character between them. Typing before a tab character
+simply replaces the tab with the character typed.
+\\[quoted-insert] replaces the text at the cursor, just as
+ordinary typing characters do.
+
+Note that Binary Overwrite mode is not its own minor mode; it is
+a specialization of overwrite mode, entered by setting the
`overwrite-mode' variable to `overwrite-mode-binary'."
- :variable (eq overwrite-mode 'overwrite-mode-binary))
+ :variable (overwrite-mode
+ . (lambda (v) (setq overwrite-mode (if v 'overwrite-mode-binary)))))
(define-minor-mode line-number-mode
- "Toggle Line Number mode.
-With ARG, turn Line Number mode on if ARG is positive, otherwise
-turn it off. When Line Number mode is enabled, the line number
-appears in the mode line.
+ "Toggle line number display in the mode line (Line Number mode).
+With a prefix argument ARG, enable Line Number mode if ARG is
+positive, and disable it otherwise. If called from Lisp, enable
+the mode if ARG is omitted or nil.
Line numbers do not appear for very large buffers and buffers
with very long lines; see variables `line-number-display-limit'
:init-value t :global t :group 'mode-line)
(define-minor-mode column-number-mode
- "Toggle Column Number mode.
-With ARG, turn Column Number mode on if ARG is positive,
-otherwise turn it off. When Column Number mode is enabled, the
-column number appears in the mode line."
+ "Toggle column number display in the mode line (Column Number mode).
+With a prefix argument ARG, enable Column Number mode if ARG is
+positive, and disable it otherwise.
+
+If called from Lisp, enable the mode if ARG is omitted or nil."
:global t :group 'mode-line)
(define-minor-mode size-indication-mode
- "Toggle Size Indication mode.
-With ARG, turn Size Indication mode on if ARG is positive,
-otherwise turn it off. When Size Indication mode is enabled, the
-size of the accessible part of the buffer appears in the mode line."
+ "Toggle buffer size display in the mode line (Size Indication mode).
+With a prefix argument ARG, enable Size Indication mode if ARG is
+positive, and disable it otherwise.
+
+If called from Lisp, enable the mode if ARG is omitted or nil."
:global t :group 'mode-line)
(define-minor-mode auto-save-mode
- "Toggle auto-saving of contents of current buffer.
-With prefix argument ARG, turn auto-saving on if positive, else off."
+ "Toggle auto-saving in the current buffer (Auto Save mode).
+With a prefix argument ARG, enable Auto Save mode if ARG is
+positive, and disable it otherwise.
+
+If called from Lisp, enable the mode if ARG is omitted or nil."
:variable ((and buffer-auto-save-file-name
;; If auto-save is off because buffer has shrunk,
;; then toggling should turn it on.
(defvar buffer-quit-function nil
"Function to call to \"quit\" the current buffer, or nil if none.
\\[keyboard-escape-quit] calls this function when its more local actions
-\(such as cancelling a prefix argument, minibuffer or region) do not apply.")
+\(such as canceling a prefix argument, minibuffer or region) do not apply.")
(defun keyboard-escape-quit ()
"Exit the current \"mode\" (in a generalized sense of the word).
`mh-e-user-agent' -- use the Emacs interface to the MH mail system.
See Info node `(mh-e)'.
`gnus-user-agent' -- like `message-user-agent', but with Gnus
- paraphernalia, particularly the Gcc: header for
- archiving.
+ paraphernalia if Gnus is running, particularly
+ the Gcc: header for archiving.
Additional valid symbols may be available; check with the author of
your package for details. The function should return non-nil if it
With a prefix argument, set VARIABLE to VALUE buffer-locally."
(interactive
(let* ((default-var (variable-at-point))
- (var (if (user-variable-p default-var)
+ (var (if (custom-variable-p default-var)
(read-variable (format "Set variable (default %s): " default-var)
default-var)
(read-variable "Set variable: ")))
(defvar completion-list-insert-choice-function #'completion--replace
"Function to use to insert the text chosen in *Completions*.
-Called with 3 arguments (BEG END TEXT), it should replace the text
+Called with three arguments (BEG END TEXT), it should replace the text
between BEG and END with TEXT. Expected to be set buffer-locally
in the *Completions* buffer.")
(setq beg (previous-single-property-change beg 'mouse-face))
(setq end (or (next-single-property-change end 'mouse-face)
(point-max)))
- (buffer-substring-no-properties beg end))))
- (owindow (selected-window)))
+ (buffer-substring-no-properties beg end)))))
(unless (buffer-live-p buffer)
(error "Destination buffer is dead"))
- (select-window (posn-window (event-start event)))
- (if (and (one-window-p t 'selected-frame)
- (window-dedicated-p (selected-window)))
- ;; This is a special buffer's frame
- (iconify-frame (selected-frame))
- (or (window-dedicated-p (selected-window))
- (bury-buffer)))
- (select-window
- (or (get-buffer-window buffer 0)
- owindow))
+ (quit-window nil (posn-window (event-start event)))
(with-current-buffer buffer
(choose-completion-string
choice buffer base-position nil)
;; This remove-text-properties should be unnecessary since `choice'
;; comes from buffer-substring-no-properties.
- ;;(remove-text-properties 0 (lenth choice) '(mouse-face nil) choice)
+ ;;(remove-text-properties 0 (length choice) '(mouse-face nil) choice)
;; Insert the completion into the buffer where it was requested.
(funcall (or insert-function completion-list-insert-choice-function)
(or (car base-position) (point))
"Finish setup of the completions buffer.
Called from `temp-buffer-show-hook'."
(when (eq major-mode 'completion-list-mode)
- (toggle-read-only 1)))
+ (setq buffer-read-only t)))
(add-hook 'temp-buffer-show-hook 'completion-list-mode-finish)
(define-minor-mode normal-erase-is-backspace-mode
"Toggle the Erase and Delete mode of the Backspace and Delete keys.
-
-With numeric ARG, turn the mode on if and only if ARG is positive.
+With a prefix argument ARG, enable this feature if ARG is
+positive, and disable it otherwise. If called from Lisp, enable
+the mode if ARG is omitted or nil.
On window systems, when this mode is on, Delete is mapped to C-d
and Backspace is mapped to DEL; when this mode is off, both
have both Backspace, Delete and F1 keys.
See also `normal-erase-is-backspace'."
- :variable (eq (terminal-parameter
- nil 'normal-erase-is-backspace) 1)
+ :variable ((eq (terminal-parameter nil 'normal-erase-is-backspace) 1)
+ . (lambda (v)
+ (setf (terminal-parameter nil 'normal-erase-is-backspace)
+ (if v 1 0))))
(let ((enabled (eq 1 (terminal-parameter
nil 'normal-erase-is-backspace))))
"Saved value of `buffer-invisibility-spec' when Visible mode is on.")
(define-minor-mode visible-mode
- "Toggle Visible mode.
-With argument ARG turn Visible mode on if ARG is positive, otherwise
-turn it off.
+ "Toggle making all invisible text temporarily visible (Visible mode).
+With a prefix argument ARG, enable Visible mode if ARG is
+positive, and disable it otherwise. If called from Lisp, enable
+the mode if ARG is omitted or nil.
-Enabling Visible mode makes all invisible text temporarily visible.
-Disabling Visible mode turns off that effect. Visible mode works by
-saving the value of `buffer-invisibility-spec' and setting it to nil."
+This mode works by saving the value of `buffer-invisibility-spec'
+and setting it to nil."
:lighter " Vis"
:group 'editing-basics
(when (local-variable-p 'vis-mode-saved-buffer-invisibility-spec)
HCoop / bpt / emacs.git / blobdiff