/* Buffer insertion/deletion and gap motion for GNU Emacs.
- Copyright (C) 1985, 1986 Free Software Foundation, Inc.
+ Copyright (C) 1985, 1986, 1993, 1994, 1995 Free Software Foundation, Inc.
This file is part of GNU Emacs.
GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
+the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU Emacs is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
-#include "config.h"
+#include <config.h>
#include "lisp.h"
#include "intervals.h"
#include "buffer.h"
+#include "charset.h"
#include "window.h"
+#include "blockinput.h"
-/* Nonzero means don't allow protected fields to be modified. */
+#ifndef NULL
+#define NULL 0
+#endif
+
+#define min(x, y) ((x) < (y) ? (x) : (y))
+
+static void insert_from_string_1 ();
+static void insert_from_buffer_1 ();
+static void gap_left ();
+static void gap_right ();
+static void adjust_markers ();
+static void adjust_point ();
+
+Lisp_Object Fcombine_after_change_execute ();
+
+/* Non-nil means don't call the after-change-functions right away,
+ just record an element in Vcombine_after_change_calls_list. */
+Lisp_Object Vcombine_after_change_calls;
-extern int check_protected_fields;
+/* List of elements of the form (BEG-UNCHANGED END-UNCHANGED CHANGE-AMOUNT)
+ describing changes which happened while combine_after_change_calls
+ was nonzero. We use this to decide how to call them
+ once the deferral ends.
+
+ In each element.
+ BEG-UNCHANGED is the number of chars before the changed range.
+ END-UNCHANGED is the number of chars after the changed range,
+ and CHANGE-AMOUNT is the number of characters inserted by the change
+ (negative for a deletion). */
+Lisp_Object combine_after_change_list;
+
+/* Buffer which combine_after_change_list is about. */
+Lisp_Object combine_after_change_buffer;
/* Move gap to position `pos'.
Note that this can quit! */
+void
move_gap (pos)
int pos;
{
/* Move the gap to POS, which is less than the current GPT.
If NEWGAP is nonzero, then don't update beg_unchanged and end_unchanged. */
+static void
gap_left (pos, newgap)
register int pos;
int newgap;
if (!newgap)
{
- if (unchanged_modified == MODIFF)
+ if (unchanged_modified == MODIFF
+ && overlay_unchanged_modified == OVERLAY_MODIFF)
{
beg_unchanged = pos;
end_unchanged = Z - pos - 1;
or may be where a quit was detected. */
adjust_markers (pos + 1, GPT, GAP_SIZE);
GPT = pos + 1;
+ if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */
QUIT;
}
+static void
gap_right (pos)
register int pos;
{
pos--;
- if (unchanged_modified == MODIFF)
+ if (unchanged_modified == MODIFF
+ && overlay_unchanged_modified == OVERLAY_MODIFF)
+
{
beg_unchanged = pos;
end_unchanged = Z - pos - 1;
adjust_markers (GPT + GAP_SIZE, pos + 1 + GAP_SIZE, - GAP_SIZE);
GPT = pos + 1;
+ if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */
QUIT;
}
-/* Add `amount' to the position of every marker in the current buffer
- whose current position is between `from' (exclusive) and `to' (inclusive).
+/* Add AMOUNT to the position of every marker in the current buffer
+ whose current position is between FROM (exclusive) and TO (inclusive).
+
Also, any markers past the outside of that interval, in the direction
of adjustment, are first moved back to the near end of the interval
- and then adjusted by `amount'. */
+ and then adjusted by AMOUNT.
+
+ When the latter adjustment is done, if AMOUNT is negative,
+ we record the adjustment for undo. (This case happens only for
+ deletion.) */
+static void
adjust_markers (from, to, amount)
register int from, to, amount;
{
register struct Lisp_Marker *m;
register int mpos;
- marker = current_buffer->markers;
+ marker = BUF_MARKERS (current_buffer);
while (!NILP (marker))
{
}
else
{
+ /* Here's the case where a marker is inside text being deleted.
+ AMOUNT can be negative for gap motion, too,
+ but then this range contains no markers. */
if (mpos > from + amount && mpos <= from)
- mpos = from + amount;
+ {
+ int before = mpos;
+ int after = from + amount;
+
+ mpos = after;
+
+ /* Compute the before and after positions
+ as buffer positions. */
+ if (before > GPT + GAP_SIZE)
+ before -= GAP_SIZE;
+ else if (before > GPT)
+ before = GPT;
+
+ if (after > GPT + GAP_SIZE)
+ after -= GAP_SIZE;
+ else if (after > GPT)
+ after = GPT;
+
+ record_marker_adjustment (marker, after - before);
+ }
}
if (mpos > from && mpos <= to)
mpos += amount;
marker = m->chain;
}
}
+
+/* Adjust markers whose insertion-type is t
+ for an insertion of AMOUNT characters at POS. */
+
+static void
+adjust_markers_for_insert (pos, amount)
+ register int pos, amount;
+{
+ Lisp_Object marker;
+ int adjusted = 0;
+
+ marker = BUF_MARKERS (current_buffer);
+
+ while (!NILP (marker))
+ {
+ register struct Lisp_Marker *m = XMARKER (marker);
+ if (m->insertion_type && m->bufpos == pos)
+ {
+ m->bufpos += amount;
+ adjusted = 1;
+ }
+ marker = m->chain;
+ }
+ if (adjusted)
+ /* Adjusting only markers whose insertion-type is t may result in
+ disordered overlays in the slot `overlays_before'. */
+ fix_overlays_before (current_buffer, pos, pos + amount);
+}
+
+/* Add the specified amount to point. This is used only when the value
+ of point changes due to an insert or delete; it does not represent
+ a conceptual change in point as a marker. In particular, point is
+ not crossing any interval boundaries, so there's no need to use the
+ usual SET_PT macro. In fact it would be incorrect to do so, because
+ either the old or the new value of point is out of sync with the
+ current set of intervals. */
+static void
+adjust_point (amount)
+ int amount;
+{
+ BUF_PT (current_buffer) += amount;
+}
\f
/* Make the gap INCREMENT characters longer. */
+void
make_gap (increment)
int increment;
{
/* If we have to get more space, get enough to last a while. */
increment += 2000;
- result = BUFFER_REALLOC (BEG_ADDR, (Z - BEG + GAP_SIZE + increment));
+ /* Don't allow a buffer size that won't fit in an int
+ even if it will fit in a Lisp integer.
+ That won't work because so many places use `int'. */
+
+ if (Z - BEG + GAP_SIZE + increment
+ >= ((unsigned) 1 << (min (BITS_PER_INT, VALBITS) - 1)))
+ error ("Buffer exceeds maximum size");
+
+ BLOCK_INPUT;
+ /* We allocate extra 1-byte `\0' at the tail for anchoring a search. */
+ result = BUFFER_REALLOC (BEG_ADDR, (Z - BEG + GAP_SIZE + increment + 1));
+
if (result == 0)
- memory_full ();
+ {
+ UNBLOCK_INPUT;
+ memory_full ();
+ }
+
+ /* We can't unblock until the new address is properly stored. */
BEG_ADDR = result;
+ UNBLOCK_INPUT;
/* Prevent quitting in move_gap. */
tem = Vinhibit_quit;
GAP_SIZE += old_gap_size;
GPT = real_gap_loc;
+ /* Put an anchor. */
+ *(Z_ADDR) = 0;
+
Vinhibit_quit = tem;
}
\f
/* Insert a string of specified length before point.
- DO NOT use this for the contents of a Lisp string!
- prepare_to_modify_buffer could relocate the string. */
+ DO NOT use this for the contents of a Lisp string or a Lisp buffer!
+ prepare_to_modify_buffer could relocate the text. */
+void
insert (string, length)
register unsigned char *string;
register length;
{
- register Lisp_Object temp;
+ if (length > 0)
+ {
+ insert_1 (string, length, 0, 1);
+ signal_after_change (PT-length, 0, length);
+ }
+}
- if (length < 1)
- return;
+void
+insert_and_inherit (string, length)
+ register unsigned char *string;
+ register length;
+{
+ if (length > 0)
+ {
+ insert_1 (string, length, 1, 1);
+ signal_after_change (PT-length, 0, length);
+ }
+}
- /* Make sure point-max won't overflow after this insertion. */
- XSET (temp, Lisp_Int, length + Z);
- if (length + Z != XINT (temp))
- error ("maximum buffer size exceeded");
+void
+insert_1 (string, length, inherit, prepare)
+ register unsigned char *string;
+ register int length;
+ int inherit, prepare;
+{
+ register Lisp_Object temp;
- prepare_to_modify_buffer (point, point);
+ if (prepare)
+ prepare_to_modify_buffer (PT, PT, NULL);
- if (point != GPT)
- move_gap (point);
+ if (PT != GPT)
+ move_gap (PT);
if (GAP_SIZE < length)
make_gap (length - GAP_SIZE);
- record_insert (point, length);
+ record_insert (PT, length);
MODIFF++;
bcopy (string, GPT_ADDR, length);
- /* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */
- offset_intervals (current_buffer, point, length);
+#ifdef USE_TEXT_PROPERTIES
+ if (BUF_INTERVALS (current_buffer) != 0)
+ /* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES. */
+ offset_intervals (current_buffer, PT, length);
+#endif
GAP_SIZE -= length;
GPT += length;
ZV += length;
Z += length;
- SET_PT (point + length);
-
- signal_after_change (point-length, 0, length);
+ if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */
+ adjust_overlays_for_insert (PT, length);
+ adjust_markers_for_insert (PT, length);
+ adjust_point (length);
+
+#ifdef USE_TEXT_PROPERTIES
+ if (!inherit && BUF_INTERVALS (current_buffer) != 0)
+ Fset_text_properties (make_number (PT - length), make_number (PT),
+ Qnil, Qnil);
+#endif
}
/* Insert the part of the text of STRING, a Lisp object assumed to be
before we bcopy the stuff into the buffer, and relocate the string
without insert noticing. */
-insert_from_string (string, pos, length)
+void
+insert_from_string (string, pos, length, inherit)
+ Lisp_Object string;
+ register int pos, length;
+ int inherit;
+{
+ if (length > 0)
+ {
+ insert_from_string_1 (string, pos, length, inherit);
+ signal_after_change (PT-length, 0, length);
+ }
+}
+
+static void
+insert_from_string_1 (string, pos, length, inherit)
Lisp_Object string;
register int pos, length;
+ int inherit;
{
register Lisp_Object temp;
struct gcpro gcpro1;
- if (length < 1)
- return;
-
/* Make sure point-max won't overflow after this insertion. */
- XSET (temp, Lisp_Int, length + Z);
+ XSETINT (temp, length + Z);
if (length + Z != XINT (temp))
error ("maximum buffer size exceeded");
GCPRO1 (string);
- prepare_to_modify_buffer (point, point);
+ prepare_to_modify_buffer (PT, PT, NULL);
- if (point != GPT)
- move_gap (point);
+ if (PT != GPT)
+ move_gap (PT);
if (GAP_SIZE < length)
make_gap (length - GAP_SIZE);
- record_insert (point, length);
+ record_insert (PT, length);
MODIFF++;
UNGCPRO;
bcopy (XSTRING (string)->data, GPT_ADDR, length);
/* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */
- offset_intervals (current_buffer, point, length);
+ offset_intervals (current_buffer, PT, length);
GAP_SIZE -= length;
GPT += length;
ZV += length;
Z += length;
+ if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */
+ adjust_overlays_for_insert (PT, length);
+ adjust_markers_for_insert (PT, length);
/* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */
- graft_intervals_into_buffer (XSTRING (string)->intervals, point,
- current_buffer);
+ graft_intervals_into_buffer (XSTRING (string)->intervals, PT, length,
+ current_buffer, inherit);
+
+ adjust_point (length);
+}
+
+/* Insert text from BUF, starting at POS and having length LENGTH, into the
+ current buffer. If the text in BUF has properties, they are absorbed
+ into the current buffer.
- SET_PT (point + length);
+ It does not work to use `insert' for this, because a malloc could happen
+ and relocate BUF's text before the bcopy happens. */
+
+void
+insert_from_buffer (buf, pos, length, inherit)
+ struct buffer *buf;
+ int pos, length;
+ int inherit;
+{
+ if (length > 0)
+ {
+ insert_from_buffer_1 (buf, pos, length, inherit);
+ signal_after_change (PT-length, 0, length);
+ }
+}
+
+static void
+insert_from_buffer_1 (buf, pos, length, inherit)
+ struct buffer *buf;
+ int pos, length;
+ int inherit;
+{
+ register Lisp_Object temp;
+ int chunk;
+
+ /* Make sure point-max won't overflow after this insertion. */
+ XSETINT (temp, length + Z);
+ if (length + Z != XINT (temp))
+ error ("maximum buffer size exceeded");
+
+ prepare_to_modify_buffer (PT, PT, NULL);
+
+ if (PT != GPT)
+ move_gap (PT);
+ if (GAP_SIZE < length)
+ make_gap (length - GAP_SIZE);
+
+ record_insert (PT, length);
+ MODIFF++;
+
+ if (pos < BUF_GPT (buf))
+ {
+ chunk = BUF_GPT (buf) - pos;
+ if (chunk > length)
+ chunk = length;
+ bcopy (BUF_CHAR_ADDRESS (buf, pos), GPT_ADDR, chunk);
+ }
+ else
+ chunk = 0;
+ if (chunk < length)
+ bcopy (BUF_CHAR_ADDRESS (buf, pos + chunk),
+ GPT_ADDR + chunk, length - chunk);
+
+#ifdef USE_TEXT_PROPERTIES
+ if (BUF_INTERVALS (current_buffer) != 0)
+ offset_intervals (current_buffer, PT, length);
+#endif
+
+ GAP_SIZE -= length;
+ GPT += length;
+ ZV += length;
+ Z += length;
+ if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */
+ adjust_overlays_for_insert (PT, length);
+ adjust_markers_for_insert (PT, length);
+ adjust_point (length);
- signal_after_change (point-length, 0, length);
+ /* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */
+ graft_intervals_into_buffer (copy_intervals (BUF_INTERVALS (buf),
+ pos, length),
+ PT - length, length, current_buffer, inherit);
}
/* Insert the character C before point */
void
insert_char (c)
- unsigned char c;
+ int c;
{
- insert (&c, 1);
+ unsigned char workbuf[4], *str;
+ int len = CHAR_STRING (c, workbuf, str);
+
+ insert (str, len);
}
/* Insert the null-terminated string S before point */
Don't use this function to insert part of a Lisp string,
since gc could happen and relocate it. */
+void
insert_before_markers (string, length)
unsigned char *string;
register int length;
{
- register int opoint = point;
- insert (string, length);
- adjust_markers (opoint - 1, opoint, length);
+ if (length > 0)
+ {
+ register int opoint = PT;
+ insert_1 (string, length, 0, 1);
+ adjust_markers (opoint - 1, opoint, length);
+ signal_after_change (PT-length, 0, length);
+ }
+}
+
+void
+insert_before_markers_and_inherit (string, length)
+ unsigned char *string;
+ register int length;
+{
+ if (length > 0)
+ {
+ register int opoint = PT;
+ insert_1 (string, length, 1, 1);
+ adjust_markers (opoint - 1, opoint, length);
+ signal_after_change (PT-length, 0, length);
+ }
}
/* Insert part of a Lisp string, relocating markers after. */
-insert_from_string_before_markers (string, pos, length)
+void
+insert_from_string_before_markers (string, pos, length, inherit)
Lisp_Object string;
register int pos, length;
+ int inherit;
{
- register int opoint = point;
- insert_from_string (string, pos, length);
- adjust_markers (opoint - 1, opoint, length);
+ if (length > 0)
+ {
+ register int opoint = PT;
+ insert_from_string_1 (string, pos, length, inherit);
+ adjust_markers (opoint - 1, opoint, length);
+ signal_after_change (PT-length, 0, length);
+ }
+}
+\f
+/* Replace the text from FROM to TO with NEW,
+ If PREPARE is nonzero, call prepare_to_modify_buffer.
+ If INHERIT, the newly inserted text should inherit text properties
+ from the surrounding non-deleted text. */
+
+/* Note that this does not yet handle markers quite right.
+ Also it needs to record a single undo-entry that does a replacement
+ rather than a separate delete and insert.
+ That way, undo will also handle markers properly. */
+
+void
+replace_range (from, to, new, prepare, inherit)
+ Lisp_Object new;
+ int from, to, prepare, inherit;
+{
+ int numdel;
+ int inslen = XSTRING (new)->size;
+ register Lisp_Object temp;
+ struct gcpro gcpro1;
+
+ GCPRO1 (new);
+
+ if (prepare)
+ {
+ int range_length = to - from;
+ prepare_to_modify_buffer (from, to, &from);
+ to = from + range_length;
+ }
+
+ /* Make args be valid */
+ if (from < BEGV)
+ from = BEGV;
+ if (to > ZV)
+ to = ZV;
+
+ UNGCPRO;
+
+ numdel = to - from;
+
+ /* Make sure point-max won't overflow after this insertion. */
+ XSETINT (temp, Z - numdel + inslen);
+ if (Z - numdel + inslen != XINT (temp))
+ error ("maximum buffer size exceeded");
+
+ if (numdel <= 0 && inslen == 0)
+ return;
+
+ GCPRO1 (new);
+
+ /* Make sure the gap is somewhere in or next to what we are deleting. */
+ if (from > GPT)
+ gap_right (from);
+ if (to < GPT)
+ gap_left (to, 0);
+
+ /* Relocate all markers pointing into the new, larger gap
+ to point at the end of the text before the gap.
+ This has to be done before recording the deletion,
+ so undo handles this after reinserting the text. */
+ adjust_markers (to + GAP_SIZE, to + GAP_SIZE, - numdel - GAP_SIZE);
+
+ record_delete (from, numdel);
+
+ GAP_SIZE += numdel;
+ ZV -= numdel;
+ Z -= numdel;
+ GPT = from;
+ *(GPT_ADDR) = 0; /* Put an anchor. */
+
+ if (GPT - BEG < beg_unchanged)
+ beg_unchanged = GPT - BEG;
+ if (Z - GPT < end_unchanged)
+ end_unchanged = Z - GPT;
+
+ if (GAP_SIZE < inslen)
+ make_gap (inslen - GAP_SIZE);
+
+ record_insert (from, inslen);
+
+ bcopy (XSTRING (new)->data, GPT_ADDR, inslen);
+
+ /* Relocate point as if it were a marker. */
+ if (from < PT)
+ adjust_point (from + inslen - (PT < to ? PT : to));
+
+#ifdef USE_TEXT_PROPERTIES
+ offset_intervals (current_buffer, PT, inslen - numdel);
+#endif
+
+ GAP_SIZE -= inslen;
+ GPT += inslen;
+ ZV += inslen;
+ Z += inslen;
+ if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */
+
+ /* Adjust the overlay center as needed. This must be done after
+ adjusting the markers that bound the overlays. */
+ adjust_overlays_for_delete (from, numdel);
+ adjust_overlays_for_insert (from, inslen);
+ adjust_markers_for_insert (from, inslen);
+
+#ifdef USE_TEXT_PROPERTIES
+ /* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */
+ graft_intervals_into_buffer (XSTRING (new)->intervals, from, inslen,
+ current_buffer, inherit);
+#endif
+
+ if (inslen == 0)
+ evaporate_overlays (from);
+
+ MODIFF++;
+ UNGCPRO;
+
+ signal_after_change (from, numdel, inslen);
}
\f
/* Delete characters in current buffer
from FROM up to (but not including) TO. */
+void
del_range (from, to)
register int from, to;
+{
+ del_range_1 (from, to, 1);
+}
+
+/* Like del_range; PREPARE says whether to call prepare_to_modify_buffer. */
+
+void
+del_range_1 (from, to, prepare)
+ int from, to, prepare;
{
register int numdel;
+ if (prepare)
+ {
+ int range_length = to - from;
+ prepare_to_modify_buffer (from, to, &from);
+ to = from + range_length;
+ }
+
/* Make args be valid */
if (from < BEGV)
from = BEGV;
if (to < GPT)
gap_left (to, 0);
- prepare_to_modify_buffer (from, to);
+ /* Relocate all markers pointing into the new, larger gap
+ to point at the end of the text before the gap.
+ This has to be done before recording the deletion,
+ so undo handles this after reinserting the text. */
+ adjust_markers (to + GAP_SIZE, to + GAP_SIZE, - numdel - GAP_SIZE);
record_delete (from, numdel);
MODIFF++;
- /* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */
- offset_intervals (current_buffer, point, - numdel);
-
/* Relocate point as if it were a marker. */
- if (from < point)
- {
- if (point < to)
- SET_PT (from);
- else
- SET_PT (point - numdel);
- }
+ if (from < PT)
+ adjust_point (from - (PT < to ? PT : to));
- /* Relocate all markers pointing into the new, larger gap
- to point at the end of the text before the gap. */
- adjust_markers (to + GAP_SIZE, to + GAP_SIZE, - numdel - GAP_SIZE);
+ /* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */
+ offset_intervals (current_buffer, from, - numdel);
+
+ /* Adjust the overlay center as needed. This must be done after
+ adjusting the markers that bound the overlays. */
+ adjust_overlays_for_delete (from, numdel);
GAP_SIZE += numdel;
ZV -= numdel;
Z -= numdel;
GPT = from;
+ *(GPT_ADDR) = 0; /* Put an anchor. */
if (GPT - BEG < beg_unchanged)
beg_unchanged = GPT - BEG;
if (Z - GPT < end_unchanged)
end_unchanged = Z - GPT;
+ evaporate_overlays (from);
signal_after_change (from, numdel, 0);
}
\f
-modify_region (start, end)
+/* Call this if you're about to change the region of BUFFER from START
+ to END. This checks the read-only properties of the region, calls
+ the necessary modification hooks, and warns the next redisplay that
+ it should pay attention to that area. */
+void
+modify_region (buffer, start, end)
+ struct buffer *buffer;
int start, end;
{
- prepare_to_modify_buffer (start, end);
+ struct buffer *old_buffer = current_buffer;
+
+ if (buffer != old_buffer)
+ set_buffer_internal (buffer);
+
+ prepare_to_modify_buffer (start, end, NULL);
- if (start - 1 < beg_unchanged || unchanged_modified == MODIFF)
+ if (start - 1 < beg_unchanged
+ || (unchanged_modified == MODIFF
+ && overlay_unchanged_modified == OVERLAY_MODIFF))
beg_unchanged = start - 1;
if (Z - end < end_unchanged
- || unchanged_modified == MODIFF)
+ || (unchanged_modified == MODIFF
+ && overlay_unchanged_modified == OVERLAY_MODIFF))
end_unchanged = Z - end;
+
+ if (MODIFF <= SAVE_MODIFF)
+ record_first_change ();
MODIFF++;
-}
+ buffer->point_before_scroll = Qnil;
+
+ if (buffer != old_buffer)
+ set_buffer_internal (old_buffer);
+}
+\f
/* Check that it is okay to modify the buffer between START and END.
Run the before-change-function, if any. If intervals are in use,
verify that the text to be modified is not read-only, and call
- any modification properties the text may have. */
+ any modification properties the text may have.
+
+ If PRESERVE_PTR is nonzero, we relocate *PRESERVE_PTR
+ by holding its value temporarily in a marker. */
-prepare_to_modify_buffer (start, end)
- Lisp_Object start, end;
+void
+prepare_to_modify_buffer (start, end, preserve_ptr)
+ int start, end;
+ int *preserve_ptr;
{
if (!NILP (current_buffer->read_only))
Fbarf_if_buffer_read_only ();
-#if 0 /* Superceded by interval code */
- if (check_protected_fields)
- Fregion_fields (start, end, Qnil, Qt);
-#endif
-
/* Only defined if Emacs is compiled with USE_TEXT_PROPERTIES */
- verify_interval_modification (current_buffer, start, end);
+ if (BUF_INTERVALS (current_buffer) != 0)
+ {
+ if (preserve_ptr)
+ {
+ Lisp_Object preserve_marker;
+ struct gcpro gcpro1;
+ preserve_marker = Fcopy_marker (make_number (*preserve_ptr), Qnil);
+ GCPRO1 (preserve_marker);
+ verify_interval_modification (current_buffer, start, end);
+ *preserve_ptr = marker_position (preserve_marker);
+ unchain_marker (preserve_marker);
+ UNGCPRO;
+ }
+ else
+ verify_interval_modification (current_buffer, start, end);
+ }
#ifdef CLASH_DETECTION
- if (!NILP (current_buffer->filename)
- && current_buffer->save_modified >= MODIFF)
- lock_file (current_buffer->filename);
+ if (!NILP (current_buffer->file_truename)
+ /* Make binding buffer-file-name to nil effective. */
+ && !NILP (current_buffer->filename)
+ && SAVE_MODIFF >= MODIFF)
+ lock_file (current_buffer->file_truename);
#else
/* At least warn if this file has changed on disk since it was visited. */
if (!NILP (current_buffer->filename)
- && current_buffer->save_modified >= MODIFF
+ && SAVE_MODIFF >= MODIFF
&& NILP (Fverify_visited_file_modtime (Fcurrent_buffer ()))
&& !NILP (Ffile_exists_p (current_buffer->filename)))
call1 (intern ("ask-user-about-supersession-threat"),
current_buffer->filename);
#endif /* not CLASH_DETECTION */
- signal_before_change (start, end);
+ signal_before_change (start, end, preserve_ptr);
+
+ if (current_buffer->newline_cache)
+ invalidate_region_cache (current_buffer,
+ current_buffer->newline_cache,
+ start - BEG, Z - end);
+ if (current_buffer->width_run_cache)
+ invalidate_region_cache (current_buffer,
+ current_buffer->width_run_cache,
+ start - BEG, Z - end);
+
+ Vdeactivate_mark = Qt;
}
\f
-static Lisp_Object
-before_change_function_restore (value)
- Lisp_Object value;
-{
- Vbefore_change_function = value;
-}
+/* These macros work with an argument named `preserve_ptr'
+ and a local variable named `preserve_marker'. */
+
+#define PRESERVE_VALUE \
+ if (preserve_ptr && NILP (preserve_marker)) \
+ preserve_marker = Fcopy_marker (make_number (*preserve_ptr), Qnil)
+
+#define RESTORE_VALUE \
+ if (! NILP (preserve_marker)) \
+ { \
+ *preserve_ptr = marker_position (preserve_marker); \
+ unchain_marker (preserve_marker); \
+ }
-static Lisp_Object
-after_change_function_restore (value)
- Lisp_Object value;
-{
- Vafter_change_function = value;
-}
+/* Signal a change to the buffer immediately before it happens.
+ START_INT and END_INT are the bounds of the text to be changed.
-/* Signal a change to the buffer immediatly before it happens.
- START and END are the bounds of the text to be changed,
- as Lisp objects. */
+ If PRESERVE_PTR is nonzero, we relocate *PRESERVE_PTR
+ by holding its value temporarily in a marker. */
-signal_before_change (start, end)
- Lisp_Object start, end;
+void
+signal_before_change (start_int, end_int, preserve_ptr)
+ int start_int, end_int;
+ int *preserve_ptr;
{
+ Lisp_Object start, end;
+ Lisp_Object preserve_marker;
+ struct gcpro gcpro1;
+
+ start = make_number (start_int);
+ end = make_number (end_int);
+ preserve_marker = Qnil;
+ GCPRO1 (preserve_marker);
+
/* If buffer is unmodified, run a special hook for that case. */
- if (current_buffer->save_modified >= MODIFF
+ if (SAVE_MODIFF >= MODIFF
&& !NILP (Vfirst_change_hook)
&& !NILP (Vrun_hooks))
- call1 (Vrun_hooks, Qfirst_change_hook);
+ {
+ PRESERVE_VALUE;
+ call1 (Vrun_hooks, Qfirst_change_hook);
+ }
- /* Now in any case run the before-change-function if any. */
+ /* Run the before-change-function if any.
+ We don't bother "binding" this variable to nil
+ because it is obsolete anyway and new code should not use it. */
if (!NILP (Vbefore_change_function))
{
- int count = specpdl_ptr - specpdl;
- Lisp_Object function;
-
- function = Vbefore_change_function;
- record_unwind_protect (after_change_function_restore,
- Vafter_change_function);
- record_unwind_protect (before_change_function_restore,
- Vbefore_change_function);
- Vafter_change_function = Qnil;
- Vbefore_change_function = Qnil;
-
- call2 (function, start, end);
- unbind_to (count, Qnil);
+ PRESERVE_VALUE;
+ call2 (Vbefore_change_function, start, end);
}
+
+ /* Now run the before-change-functions if any. */
+ if (!NILP (Vbefore_change_functions))
+ {
+ Lisp_Object args[3];
+ Lisp_Object before_change_functions;
+ Lisp_Object after_change_functions;
+ struct gcpro gcpro1, gcpro2;
+
+ PRESERVE_VALUE;
+
+ /* "Bind" before-change-functions and after-change-functions
+ to nil--but in a way that errors don't know about.
+ That way, if there's an error in them, they will stay nil. */
+ before_change_functions = Vbefore_change_functions;
+ after_change_functions = Vafter_change_functions;
+ Vbefore_change_functions = Qnil;
+ Vafter_change_functions = Qnil;
+ GCPRO2 (before_change_functions, after_change_functions);
+
+ /* Actually run the hook functions. */
+ args[0] = Qbefore_change_functions;
+ args[1] = start;
+ args[2] = end;
+ run_hook_list_with_args (before_change_functions, 3, args);
+
+ /* "Unbind" the variables we "bound" to nil. */
+ Vbefore_change_functions = before_change_functions;
+ Vafter_change_functions = after_change_functions;
+ UNGCPRO;
+ }
+
+ if (!NILP (current_buffer->overlays_before)
+ || !NILP (current_buffer->overlays_after))
+ {
+ PRESERVE_VALUE;
+ report_overlay_modification (start, end, 0, start, end, Qnil);
+ }
+
+ RESTORE_VALUE;
+ UNGCPRO;
}
-/* Signal a change immediatly after it happens.
+/* Signal a change immediately after it happens.
POS is the address of the start of the changed text.
LENDEL is the number of characters of the text before the change.
(Not the whole buffer; just the part that was changed.)
- LENINS is the number of characters in the changed text. */
+ LENINS is the number of characters in that part of the text
+ after the change. */
+void
signal_after_change (pos, lendel, lenins)
int pos, lendel, lenins;
{
+ /* If we are deferring calls to the after-change functions
+ and there are no before-change functions,
+ just record the args that we were going to use. */
+ if (! NILP (Vcombine_after_change_calls)
+ && NILP (Vbefore_change_function) && NILP (Vbefore_change_functions)
+ && NILP (current_buffer->overlays_before)
+ && NILP (current_buffer->overlays_after))
+ {
+ Lisp_Object elt;
+
+ if (!NILP (combine_after_change_list)
+ && current_buffer != XBUFFER (combine_after_change_buffer))
+ Fcombine_after_change_execute ();
+
+ elt = Fcons (make_number (pos - BEG),
+ Fcons (make_number (Z - (pos - lendel + lenins)),
+ Fcons (make_number (lenins - lendel), Qnil)));
+ combine_after_change_list
+ = Fcons (elt, combine_after_change_list);
+ combine_after_change_buffer = Fcurrent_buffer ();
+
+ return;
+ }
+
+ if (!NILP (combine_after_change_list))
+ Fcombine_after_change_execute ();
+
+ /* Run the after-change-function if any.
+ We don't bother "binding" this variable to nil
+ because it is obsolete anyway and new code should not use it. */
if (!NILP (Vafter_change_function))
+ call3 (Vafter_change_function,
+ make_number (pos), make_number (pos + lenins),
+ make_number (lendel));
+
+ if (!NILP (Vafter_change_functions))
+ {
+ Lisp_Object args[4];
+ Lisp_Object before_change_functions;
+ Lisp_Object after_change_functions;
+ struct gcpro gcpro1, gcpro2;
+
+ /* "Bind" before-change-functions and after-change-functions
+ to nil--but in a way that errors don't know about.
+ That way, if there's an error in them, they will stay nil. */
+ before_change_functions = Vbefore_change_functions;
+ after_change_functions = Vafter_change_functions;
+ Vbefore_change_functions = Qnil;
+ Vafter_change_functions = Qnil;
+ GCPRO2 (before_change_functions, after_change_functions);
+
+ /* Actually run the hook functions. */
+ args[0] = Qafter_change_functions;
+ XSETFASTINT (args[1], pos);
+ XSETFASTINT (args[2], pos + lenins);
+ XSETFASTINT (args[3], lendel);
+ run_hook_list_with_args (after_change_functions,
+ 4, args);
+
+ /* "Unbind" the variables we "bound" to nil. */
+ Vbefore_change_functions = before_change_functions;
+ Vafter_change_functions = after_change_functions;
+ UNGCPRO;
+ }
+
+ if (!NILP (current_buffer->overlays_before)
+ || !NILP (current_buffer->overlays_after))
+ report_overlay_modification (make_number (pos),
+ make_number (pos + lenins),
+ 1,
+ make_number (pos), make_number (pos + lenins),
+ make_number (lendel));
+
+ /* After an insertion, call the text properties
+ insert-behind-hooks or insert-in-front-hooks. */
+ if (lendel == 0)
+ report_interval_modification (pos, pos + lenins);
+}
+
+Lisp_Object
+Fcombine_after_change_execute_1 (val)
+ Lisp_Object val;
+{
+ Vcombine_after_change_calls = val;
+ return val;
+}
+
+DEFUN ("combine-after-change-execute", Fcombine_after_change_execute,
+ Scombine_after_change_execute, 0, 0, 0,
+ "This function is for use internally in `combine-after-change-calls'.")
+ ()
+{
+ register Lisp_Object val;
+ int count = specpdl_ptr - specpdl;
+ int beg, end, change;
+ int begpos, endpos;
+ Lisp_Object tail;
+
+ record_unwind_protect (Fset_buffer, Fcurrent_buffer ());
+
+ Fset_buffer (combine_after_change_buffer);
+
+ /* # chars unchanged at beginning of buffer. */
+ beg = Z - BEG;
+ /* # chars unchanged at end of buffer. */
+ end = beg;
+ /* Total amount of insertion (negative for deletion). */
+ change = 0;
+
+ /* Scan the various individual changes,
+ accumulating the range info in BEG, END and CHANGE. */
+ for (tail = combine_after_change_list; CONSP (tail);
+ tail = XCONS (tail)->cdr)
{
- int count = specpdl_ptr - specpdl;
- Lisp_Object function;
- function = Vafter_change_function;
-
- record_unwind_protect (after_change_function_restore,
- Vafter_change_function);
- record_unwind_protect (before_change_function_restore,
- Vbefore_change_function);
- Vafter_change_function = Qnil;
- Vbefore_change_function = Qnil;
-
- call3 (function, make_number (pos), make_number (pos + lenins),
- make_number (lendel));
- unbind_to (count, Qnil);
+ Lisp_Object elt;
+ int thisbeg, thisend, thischange;
+
+ /* Extract the info from the next element. */
+ elt = XCONS (tail)->car;
+ if (! CONSP (elt))
+ continue;
+ thisbeg = XINT (XCONS (elt)->car);
+
+ elt = XCONS (elt)->cdr;
+ if (! CONSP (elt))
+ continue;
+ thisend = XINT (XCONS (elt)->car);
+
+ elt = XCONS (elt)->cdr;
+ if (! CONSP (elt))
+ continue;
+ thischange = XINT (XCONS (elt)->car);
+
+ /* Merge this range into the accumulated range. */
+ change += thischange;
+ if (thisbeg < beg)
+ beg = thisbeg;
+ if (thisend < end)
+ end = thisend;
}
+
+ /* Get the current start and end positions of the range
+ that was changed. */
+ begpos = BEG + beg;
+ endpos = Z - end;
+
+ /* We are about to handle these, so discard them. */
+ combine_after_change_list = Qnil;
+
+ /* Now run the after-change functions for real.
+ Turn off the flag that defers them. */
+ record_unwind_protect (Fcombine_after_change_execute_1,
+ Vcombine_after_change_calls);
+ signal_after_change (begpos, endpos - begpos - change, endpos - begpos);
+
+ return unbind_to (count, val);
+}
+\f
+syms_of_insdel ()
+{
+ staticpro (&combine_after_change_list);
+ combine_after_change_list = Qnil;
+
+ DEFVAR_LISP ("combine-after-change-calls", &Vcombine_after_change_calls,
+ "Used internally by the `combine-after-change-calls' macro.");
+ Vcombine_after_change_calls = Qnil;
+
+ defsubr (&Scombine_after_change_execute);
}
HCoop / bpt / emacs.git / blobdiff