#!/bin/sh
### make-dist: create an Emacs distribution tar file from current srcdir
-## Copyright (C) 1995, 1997, 1998, 2000, 2001, 2002, 2003, 2004, 2005,
-## 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+## Copyright (C) 1995, 1997-1998, 2000-2011 Free Software Foundation, Inc.
## This file is part of GNU Emacs.
### (Accept only absolute file names.)
if [ $update = yes ];
then
- unset EMACS_UNIBYTE
if [ -f src/emacs ];
then
EMACS=`pwd`/src/emacs
fi
### Find out which version of Emacs this is.
-version=`sed -n '/char emacs_version/ s/^[^"]*"\([^"]*\)".*$/\1/p' src/emacs.c`
+version=`
+ sed -n 's/^AC_INIT(emacs,[ ]*\([^ )]*\).*/\1/p' <configure.in
+` || version=
if [ ! "${version}" ]; then
echo "${progname}: can't find current Emacs version in \`./src/emacs.c'" >&2
exit 1
exit 1
fi
-### Find where to run Emacs.
-if [ $check = yes ];
-then
- ### Check for .elc files with no corresponding .el file.
+if [ $check = yes ]; then
ls -1 lisp/[a-zA-Z]*.el lisp/[a-z]*/[a-zA-Z0-9]*.el \
lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- leim/[a-z]*/[a-z]*.el | sed 's/\.el$/.elc/' > /tmp/el
+ leim/[a-z]*/[a-z]*.el > /tmp/el
+
ls -1 lisp/[a-zA-Z]*.elc lisp/[a-z]*/[a-zA-Z0-9]*.elc \
lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.elc \
lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.elc \
leim/[a-z]*/[a-z]*.elc > /tmp/elc
- bogosities="`comm -13 /tmp/el /tmp/elc`"
- if [ "${bogosities}" != "" ]; then
+
+ ## Check for .elc files with no corresponding .el file.
+ sed 's/\.el$/.elc/' /tmp/el > /tmp/elelc
+
+ bogosities="`comm -13 /tmp/elelc /tmp/elc`"
+ if [ x"${bogosities}" != x"" ]; then
echo "The following .elc files have no corresponding .el files:"
echo "${bogosities}"
fi
- rm -f /tmp/el /tmp/elc
### Check for .el files with no corresponding .elc file.
- ls -1 lisp/[a-zA-Z]*.el lisp/[a-z]*/[a-zA-Z0-9]*.el \
- lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- leim/[a-z]*/[a-z]*.el > /tmp/el
- ls -1 lisp/[a-zA-Z]*.elc lisp/[a-z]*/[a-zA-Z0-9]*.elc \
- lisp/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- lisp/[a-z]*/[a-z]*/[a-z]*/[a-zA-Z0-9]*.el \
- leim/[a-z]*/[a-z]*.elc | sed 's/\.elc$/.el/' > /tmp/elc
- losers="`comm -23 /tmp/el /tmp/elc`"
+ sed 's/\.elc$/.el/' /tmp/elc > /tmp/elcel
+ losers="`comm -23 /tmp/el /tmp/elcel`"
+
+ rm -f /tmp/el /tmp/elc /tmp/elcel /tmp/elelc
+
bogosities=
for file in $losers; do
- if ! grep -q "no-byte-compile: t" $file; then
- case $file in
- site-init.el | site-load.el | site-start.el | default.el)
- ;;
- *)
- bogosities="$file $bogosities"
- ;;
- esac
- fi
+ grep -q "no-byte-compile: t" $file && continue
+ case $file in
+ site-init.el | site-load.el | site-start.el | default.el) continue ;;
+ esac
+
+ bogosities="$file $bogosities"
+
done
if [ x"${bogosities}" != x"" ]; then
echo "The following .el files have no corresponding .elc files:"
echo "${bogosities}"
fi
- rm -f /tmp/el /tmp/elc
fi
-### Make sure configure is newer than configure.in.
-if [ "x`ls -t configure configure.in | sed q`" != "xconfigure" ]; then
- echo "\`./configure.in' is newer than \`./configure'" >&2
- echo "Running autoconf" >&2
- autoconf || { x=$?; echo Autoconf FAILED! >&2; exit $x; }
-fi
+if [ $update = yes ]; then
-### Make sure src/stamp-h.in is newer than configure.in.
-if [ "x`ls -t src/stamp-h.in configure.in | sed q`" != "xsrc/stamp-h.in" ]; then
- echo "\`./configure.in' is newer than \`./src/stamp-h.in'" >&2
- echo "Running autoheader" >&2
- autoheader || { x=$?; echo Autoheader FAILED! >&2; exit $x; }
- rm -f src/stamp-h.in
- echo timestamp > src/stamp-h.in
-fi
+ ## Make sure configure is newer than configure.in.
+ if [ "x`ls -t configure configure.in | sed q`" != "xconfigure" ]; then
+ echo "\`./configure.in' is newer than \`./configure'" >&2
+ echo "Running autoconf" >&2
+ autoconf || { x=$?; echo Autoconf FAILED! >&2; exit $x; }
+ fi
+
+ ## Make sure src/stamp-h.in is newer than configure.in.
+ if [ "x`ls -t src/stamp-h.in configure.in | sed q`" != "xsrc/stamp-h.in" ]; then
+ echo "\`./configure.in' is newer than \`./src/stamp-h.in'" >&2
+ echo "Running autoheader" >&2
+ autoheader || { x=$?; echo Autoheader FAILED! >&2; exit $x; }
+ rm -f src/stamp-h.in
+ echo timestamp > src/stamp-h.in
+ fi
-if [ $update = yes ];
-then
echo "Updating Info files"
(cd doc/emacs; make info)
(cd doc/misc; make info)
echo "Recompiling Lisp files"
$EMACS -batch -f batch-byte-recompile-directory lisp leim
-fi
-
-## What is this file for? It goes in srcdir, not the tarfile.
-## Why does it exclude term/ ?
-echo "Making lisp/MANIFEST"
-
-files=`find lisp -type f -name '*.el'`
-for file in $files; do
- case "$file" in
- */subdirs.el|*/default.el|*/loaddefs.el|*/term/*) continue ;;
- esac
- sed -n 's/^;;; //p; q' $file
-done | sort > lisp/MANIFEST
+fi # $update = yes
echo "Creating staging directory: \`${tempparent}'"
### tar file; this means that people can start reading the INSTALL and
### README while the rest of the tar file is still unpacking. Whoopee.
echo "Making links to top-level files"
-ln INSTALL README BUGS move-if-change ${tempdir}
+ln INSTALL README BUGS ${tempdir}
ln ChangeLog Makefile.in configure configure.in ${tempdir}
ln config.bat make-dist update-subdirs vpath.sed .dir-locals.el ${tempdir}
-ln mkinstalldirs config.sub config.guess install-sh ${tempdir}
+ln aclocal.m4 ${tempdir}
echo "Creating subdirectories"
for subdir in site-lisp \
leim leim/CXTERM-DIC leim/MISC-DIC \
leim/SKK-DIC leim/ja-dic leim/quail \
- src src/m src/s src/bitmaps lib-src oldXMenu lwlib \
+ build-aux build-aux/snippet \
+ src src/m src/s src/bitmaps lib lib-src oldXMenu lwlib \
nt nt/inc nt/inc/sys nt/inc/arpa nt/inc/netinet nt/icons \
- `find etc lisp -type d` \
+ `find etc lisp admin -type d` \
doc doc/emacs doc/misc doc/man doc/lispref doc/lispintro \
info m4 msdos \
nextstep nextstep/Cocoa nextstep/Cocoa/Emacs.base \
rm -f ../${tempdir}/leim/quail/tsang-b5.*
rm -f ../${tempdir}/leim/quail/tsang-cns.*)
+echo "Making links to \`build-aux'"
+(cd build-aux
+ ln compile config.guess config.sub depcomp ../${tempdir}/build-aux
+ ln install-sh missing move-if-change ../${tempdir}/build-aux)
+
+echo "Making links to \`build-aux/snippet'"
+(cd build-aux/snippet
+ ln *.h ../../${tempdir}/build-aux/snippet)
+
echo "Making links to \`src'"
### Don't distribute the configured versions of
### config.in, paths.in, buildobj.h, or Makefile.in.
ln makefile.w32-in ../${tempdir}/src
ln .gdbinit .dbxinit ../${tempdir}/src
cd ../${tempdir}/src
- rm -f config.h epaths.h Makefile buildobj.h)
+ rm -f globals.h config.h epaths.h Makefile buildobj.h)
echo "Making links to \`src/bitmaps'"
(cd src/bitmaps
(cd src/s
ln README [a-zA-Z0-9]*.h ../../${tempdir}/src/s)
+echo "Making links to \`lib'"
+(snippet_h=`(cd build-aux/snippet && ls *.h)`
+ cd lib
+ ln [a-zA-Z]*.[ch] ../${tempdir}/lib
+ ln gnulib.mk Makefile.am Makefile.in makefile.w32-in ../${tempdir}/lib
+ cd ../${tempdir}/lib
+ script='/[*]/d; s/\.in\.h$/.h/'
+ rm -f `(echo "$snippet_h"; ls *.in.h) | sed "$script"`)
+
echo "Making links to \`lib-src'"
(cd lib-src
ln [a-zA-Z]*.[ch] ../${tempdir}/lib-src
ln ChangeLog Makefile.in README testfile vcdiff ../${tempdir}/lib-src
ln grep-changelog rcs2log rcs-checkin ../${tempdir}/lib-src
- ln makefile.w32-in ../${tempdir}/lib-src
- cd ../${tempdir}/lib-src
- rm -f getopt.h)
+ ln makefile.w32-in ../${tempdir}/lib-src)
echo "Making links to \`m4'"
(cd m4
ln *.[ch] *.in ../${tempdir}/lwlib
ln README ChangeLog ../${tempdir}/lwlib)
+echo "Making links to \`admin' and its subdirectories"
+for f in `find admin -type f`; do
+ ln $f $tempdir/$f
+done
+
echo "Making links to \`etc' and its subdirectories"
for f in `find etc -type f`; do
case $f in
- etc/DOC*) continue ;;
+ etc/DOC*|etc/*.pyc) continue ;;
esac
ln $f $tempdir/$f
done
### It would be nice if they could all be symlinks to top-level copy, but
### you're not supposed to have any symlinks in distribution tar files.
echo "Making sure copying notices are all copies of \`COPYING'"
-for subdir in . etc info leim lib-src lisp lwlib msdos nt src; do
+for subdir in . etc info leim lib lib-src lisp lwlib msdos nt src; do
rm -f ${tempdir}/${subdir}/COPYING
cp COPYING ${tempdir}/${subdir}
done
HCoop / bpt / emacs.git / blobdiff