@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
-@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999
+@c Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1998, 1999, 2004
@c Free Software Foundation, Inc.
@c See the file elisp.texi for copying conditions.
@setfilename ../info/os
This normal hook is run, once, just after loading all the init files
(the user's init file, @file{default.el}, and/or @file{site-start.el}),
before loading the terminal-specific library and processing the
-command-line arguments.
+command-line action arguments.
@end defvar
@defvar emacs-startup-hook
@defvar user-init-file
@tindex user-init-file
-This variable holds the file name of the user's init file. If the
+This variable holds the absolute file name of the user's init file. If the
actual init file loaded is a compiled file, such as @file{.emacs.elc},
the value refers to the corresponding source file.
@end defvar
Emacs inadvertently can lose a lot of work, Emacs queries for
confirmation before actually terminating if you have buffers that need
saving or subprocesses that are running. This is done in the function
-@code{save-buffers-kill-emacs}.
+@code{save-buffers-kill-emacs}, the higher level function from which
+@code{kill-emacs} is usually called.
@defvar kill-emacs-query-functions
After asking the standard questions, @code{save-buffers-kill-emacs}
calls the functions in the list @code{kill-emacs-query-functions}, in
order of appearance, with no arguments. These functions can ask for
additional confirmation from the user. If any of them returns
-@code{nil}, Emacs is not killed.
+@code{nil}, @code{save-buffers-kill-emacs} does not kill Emacs, and
+does not run the remaining functions in this hook. Calling
+@code{kill-emacs} directly does not run this hook.
@end defvar
@defvar kill-emacs-hook
This variable is a normal hook; once @code{save-buffers-kill-emacs} is
-finished with all file saving and confirmation, it runs the functions in
-this hook. This hook is not run in batch mode.
+finished with all file saving and confirmation, it calls
+@code{kill-emacs} which runs the functions in this hook.
+@code{kill-emacs} does not run this hook in batch mode.
+
+@code{kill-emacs} may be invoked directly (that is not via
+@code{save-buffers-kill-emacs}) if the terminal is disconnected, or in
+similar situations where interaction with the user is not possible.
+Thus, if your hook needs to interact with the user, put it on
+@code{kill-emacs-query-functions}; if it needs to run regardless of
+how Emacs is killed, put it on @code{kill-emacs-hook}.
@end defvar
@node Suspending Emacs
different window. Therefore, suspending is not allowed when Emacs is using
a window system (X or MS Windows).
-@defun suspend-emacs string
+@defun suspend-emacs &optional string
This function stops Emacs and returns control to the superior process.
If and when the superior process resumes Emacs, @code{suspend-emacs}
returns @code{nil} to its caller in Lisp.
(function (lambda ()
(or (y-or-n-p
"Really suspend? ")
- (error "Suspend cancelled")))))
+ (error "Suspend canceled")))))
@result{} (lambda nil
(or (y-or-n-p "Really suspend? ")
- (error "Suspend cancelled")))
+ (error "Suspend canceled")))
@end group
@group
(add-hook 'suspend-resume-hook
@deffn Command getenv var
@cindex environment variable access
This function returns the value of the environment variable @var{var},
-as a string. Within Emacs, the environment variable values are kept in
-the Lisp variable @code{process-environment}.
+as a string. @var{var} should be a string. If @var{var} is undefined
+in the environment, @code{getenv} returns @code{nil}. If returns
+@samp{""} if @var{var} is set but null. Within Emacs, the environment
+variable values are kept in the Lisp variable @code{process-environment}.
@example
@group
@end deffn
@c Emacs 19 feature
-@deffn Command setenv variable value
+@deffn Command setenv variable &optional value
This command sets the value of the environment variable named
-@var{variable} to @var{value}. Both arguments should be strings. This
-function works by modifying @code{process-environment}; binding that
-variable with @code{let} is also reasonable practice.
+@var{variable} to @var{value}. @var{variable} should be a string.
+Internally, Emacs Lisp can handle any string. However, normally
+@var{variable} should be a valid shell identifier, that is, a sequence
+of letters, digits and underscores, starting with a letter or
+underscore. Otherwise, errors may occur if subprocesses of Emacs try
+to access the value of @var{variable}. If @var{value} is omitted or
+@code{nil}, @code{setenv} removes @var{variable} from the environment.
+Otherwise, @var{value} should be a string.
+
+@code{setenv} works by modifying @code{process-environment}; binding
+that variable with @code{let} is also reasonable practice.
+
+@code{setenv} returns the new value of @var{variable}, or @code{nil}
+if it removed @var{variable} from the environment.
@end deffn
@defvar process-environment
installing Emacs as setuid or setgid so that it can read kernel
information, and that usually isn't advisable.
+If the 1-minute load average is available, but the 5- or 15-minute
+averages are not, this function returns a shortened list containing
+the available averages.
+
@example
@group
(load-average)
@end defun
@defun emacs-pid
-This function returns the process @acronym{ID} of the Emacs process.
+This function returns the process @acronym{ID} of the Emacs process,
+as an integer.
@end defun
@defvar tty-erase-char
This variable holds the erase character that was selected
in the system's terminal driver, before Emacs was started.
+The value is @code{nil} if Emacs is running under a window system.
@end defvar
@defun setprv privilege-name &optional setp getprv
@code{nil}. The function returns @code{t} if successful, @code{nil}
otherwise.
- If the third argument, @var{getprv}, is non-@code{nil}, @code{setprv}
+If the third argument, @var{getprv}, is non-@code{nil}, @code{setprv}
does not change the privilege, but returns @code{t} or @code{nil}
indicating whether the privilege is currently enabled.
@end defun
@section User Identification
@defvar init-file-user
-This variable says which user's init files should be used by Emacs---or
-@code{nil} if none. The value reflects command-line options such as
+This variable says which user's init files should be used by
+Emacs---or @code{nil} if none. @code{""} stands for the user who
+originally logged in. The value reflects command-line options such as
@samp{-q} or @samp{-u @var{user}}.
Lisp packages that load files of customizations, or any other sort of
on the effective @acronym{UID}, not the real @acronym{UID}.
If you specify @var{uid}, the value is the user name that corresponds
-to @var{uid} (which should be an integer).
+to @var{uid} (which should be an integer), or @code{nil} if there is
+no such user.
@example
@group
If the Emacs job's user-id does not correspond to any known user (and
provided @code{NAME} is not set), the value is @code{"unknown"}.
-If @var{uid} is non-@code{nil}, then it should be an integer (a user-id)
+If @var{uid} is non-@code{nil}, then it should be a number (a user-id)
or a string (a login name). Then @code{user-full-name} returns the full
name corresponding to that user-id or login name. If you specify a
user-id or login name that isn't defined, it returns @code{nil}.
instead of the current time. The argument should be a list whose first
two elements are integers. Thus, you can use times obtained from
@code{current-time} (see below) and from @code{file-attributes}
-(@pxref{File Attributes}).
+(@pxref{Definition of file-attributes}). @var{time-value} can also be
+a cons of two integers, but this is considered obsolete.
@example
@group
This function returns the system's time value as a list of three
integers: @code{(@var{high} @var{low} @var{microsec})}. The integers
@var{high} and @var{low} combine to give the number of seconds since
-0:00 January 1, 1970 (local time), which is
+0:00 January 1, 1970 UTC (Coordinated Universal Time), which is
@ifnottex
@var{high} * 2**16 + @var{low}.
@end ifnottex
the resolution of only one second).
The first two elements can be compared with file time values such as you
-get with the function @code{file-attributes}. @xref{File Attributes}.
+get with the function @code{file-attributes}.
+@xref{Definition of file-attributes}.
@end defun
@c Emacs 19 feature
adjustment, then the value is constant through time.
If the operating system doesn't supply all the information necessary to
-compute the value, both elements of the list are @code{nil}.
+compute the value, the unknown elements of the list are @code{nil}.
The argument @var{time-value}, if given, specifies a time to analyze
-instead of the current time. The argument should be a cons cell
-containing two integers, or a list whose first two elements are
-integers. Thus, you can use times obtained from @code{current-time}
-(see above) and from @code{file-attributes} (@pxref{File Attributes}).
+instead of the current time. The argument should have the same form
+as for @code{current-time-string} (see above). Thus, you can use
+times obtained from @code{current-time} (see above) and from
+@code{file-attributes}. @xref{Definition of file-attributes}.
@end defun
@defun set-time-zone-rule tz
This function specifies the local time zone according to @var{tz}. If
@var{tz} is @code{nil}, that means to use an implementation-defined
default time zone. If @var{tz} is @code{t}, that means to use
-Universal Time.
+Universal Time. Otherwise, @var{tz} should be a string specifying a
+time zone rule.
@end defun
@defun float-time &optional time-value
seconds since the epoch. The argument @var{time-value}, if given,
specifies a time to convert instead of the current time. The argument
should have the same form as for @code{current-time-string} (see
-above), and it also accepts the output of @code{current-time} and
+above). Thus, it accepts the output of @code{current-time} and
@code{file-attributes}.
@emph{Warning}: Since the result is floating point, it may not be
to strings or to calendrical information. There is also a function to
convert calendrical information to a time value. You can get time
values from the functions @code{current-time} (@pxref{Time of Day}) and
-@code{file-attributes} (@pxref{File Attributes}).
+@code{file-attributes} (@pxref{Definition of file-attributes}).
Many operating systems are limited to time values that contain 32 bits
of information; these systems typically handle only the times from
@table @var
@item seconds
The number of seconds past the minute, as an integer between 0 and 59.
+On some operating systems, this is 60 for leap seconds.
@item minutes
The number of minutes past the hour, as an integer between 0 and 59.
@item hour
The optional argument @var{zone} defaults to the current time zone and
its daylight savings time rules. If specified, it can be either a list
(as you would get from @code{current-time-zone}), a string as in the
-@code{TZ} environment variable, or an integer (as you would get from
-@code{decode-time}). The specified zone is used without any further
-alteration for daylight savings time.
+@code{TZ} environment variable, @code{t} for Universal Time, or an
+integer (as you would get from @code{decode-time}). The specified
+zone is used without any further alteration for daylight savings time.
If you pass more than seven arguments to @code{encode-time}, the first
six are used as @var{seconds} through @var{year}, the last argument is
timer to call a function that takes substantial time to run is likely
to be annoying.
-@defun run-at-time time repeat function &rest args
-This function arranges to call @var{function} with arguments @var{args}
-at time @var{time}. The argument @var{function} is a function to call
-later, and @var{args} are the arguments to give it when it is called.
-The time @var{time} is specified as a string.
+@deffn Command run-at-time time repeat function &rest args
+This sets up a timer that calls the function @var{function} with
+arguments @var{args} at time @var{time}. If @var{repeat} is a number
+(integer or floating point), the timer also runs every @var{repeat}
+seconds after that. If @var{repeat} is @code{nil}, the timer runs
+only once.
+
+@var{time} may specify an absolute or a relative time.
Absolute times may be specified in a wide variety of formats; this
-function tries to accept all the commonly used date formats. Valid
-formats include these two,
+function tries to accept all the commonly used date formats. The most
+convenient formats are strings. Valid such formats include these two,
@example
@var{year}-@var{month}-@var{day} @var{hour}:@var{min}:@var{sec} @var{timezone}
@code{current-time-string} returns is also allowed, and many others
as well.
-To specify a relative time, use numbers followed by units.
+To specify a relative time as a string, use numbers followed by units.
For example:
@table @samp
For relative time values, Emacs considers a month to be exactly thirty
days, and a year to be exactly 365.25 days.
-If @var{time} is a number (integer or floating point), that specifies a
-relative time measured in seconds.
-
-The argument @var{repeat} specifies how often to repeat the call. If
-@var{repeat} is @code{nil}, there are no repetitions; @var{function} is
-called just once, at @var{time}. If @var{repeat} is a number, it
-specifies a repetition period measured in seconds.
+Not all convenient formats are strings. If @var{time} is a number
+(integer or floating point), that specifies a relative time measured
+in seconds.
In most cases, @var{repeat} has no effect on when @emph{first} call
takes place---@var{time} alone specifies that. There is one exception:
The function @code{run-at-time} returns a timer value that identifies
the particular scheduled future action. You can use this value to call
@code{cancel-timer} (see below).
-@end defun
+@end deffn
@defmac with-timeout (seconds timeout-forms@dots{}) body@dots{}
Execute @var{body}, but give up after @var{seconds} seconds. If
a timer to avoid waiting too long for an answer. @xref{Yes-or-No
Queries}.
-@defun run-with-idle-timer secs repeat function &rest args
+@deffn Command run-with-idle-timer secs repeat function &rest args
Set up a timer which runs when Emacs has been idle for @var{secs}
seconds. The value of @var{secs} may be an integer or a floating point
number.
The function @code{run-with-idle-timer} returns a timer value which you
can use in calling @code{cancel-timer} (see below).
-@end defun
+@end deffn
@cindex idleness
Emacs becomes ``idle'' when it starts waiting for user input, and it
@defun cancel-timer timer
Cancel the requested action for @var{timer}, which should be a value
previously returned by @code{run-at-time} or @code{run-with-idle-timer}.
-This cancels the effect of that call to @code{run-at-time}; the arrival
-of the specified time will not cause anything special to happen.
+This cancels the effect of that call to one of these functions; the
+arrival of the specified time will not cause anything special to happen.
@end defun
@node Terminal Input
@cindex input modes
@cindex terminal input modes
-@defun set-input-mode interrupt flow meta quit-char
+@defun set-input-mode interrupt flow meta &optional quit-char
This function sets the mode for reading keyboard input. If
@var{interrupt} is non-null, then Emacs uses input interrupts. If it is
@code{nil}, then it uses @sc{cbreak} mode. The default setting is
@c Emacs 19 feature
@defvar extra-keyboard-modifiers
This variable lets Lisp programs ``press'' the modifier keys on the
-keyboard. The value is a bit mask:
-
-@table @asis
-@item 1
-The @key{SHIFT} key.
-@item 2
-The @key{LOCK} key.
-@item 4
-The @key{CTL} key.
-@item 8
-The @key{META} key.
-@end table
-
-Each time the user types a keyboard key, it is altered as if the
-modifier keys specified in the bit mask were held down.
+keyboard. The value is a character. Only the modifiers of the
+character matter. Each time the user types a keyboard key, it is
+altered as if those modifier keys were held down. For instance, if
+you bind @code{extra-keyboard-modifiers} to @code{?\C-\M-a}, then all
+keyboard input characters typed during the scope of the binding will
+have the control and meta modifiers applied to them. The character
+@code{?\C-@@}, equivalent to the integer 0, does not count as a control
+character for this purpose, but as a character with no modifiers.
+Thus, setting @code{extra-keyboard-modifiers} to zero cancels any
+modification.
When using a window system, the program can ``press'' any of the
modifier keys in this way. Otherwise, only the @key{CTL} and @key{META}
keys can be virtually pressed.
+
+Note that this variable applies only to events that really come from
+the keyboard, and has no effect on mouse events or any other events.
@end defvar
@defvar keyboard-translate-table
This variable is the translate table for keyboard characters. It lets
you reshuffle the keys on the keyboard without changing any command
bindings. Its value is normally a char-table, or else @code{nil}.
+(It can also be a string or vector, but this is considered obsolete.)
If @code{keyboard-translate-table} is a char-table
(@pxref{Char-Tables}), then each character read from the keyboard is
character after it is read from the terminal. Record-keeping features
such as @code{recent-keys} and dribble files record the characters after
translation.
+
+Note also that this translation is done before the characters are
+supplied to input methods (@pxref{Input Methods}). Use
+@code{translation-table-for-input} (@pxref{Translation of Characters}),
+if you want to translate characters after input methods operate.
@end defvar
@defun keyboard-translate from to
Finally, if you have enabled keyboard character set decoding using
@code{set-keyboard-coding-system}, decoding is done after the
-translations listed above. @xref{Specifying Coding Systems}. In future
+translations listed above. @xref{Terminal I/O Encoding}. In future
Emacs versions, character set decoding may be done before the other
translations.
were actually output, you can determine reliably whether they correspond
to the Termcap specifications in use.
-See also @code{open-dribble-file} in @ref{Terminal Input}.
+You close the termscript file by calling this function with an
+argument of @code{nil}.
+
+See also @code{open-dribble-file} in @ref{Recording Input}.
@example
@group
mean time, Emacs provides a convenient way of enabling flow control if
you want it: call the function @code{enable-flow-control}.
-@deffn Command enable-flow-control
-This function enables use of @kbd{C-s} and @kbd{C-q} for output flow
-control, and provides the characters @kbd{C-\} and @kbd{C-^} as aliases
-for them using @code{keyboard-translate-table} (@pxref{Translating Input}).
+@deffn Command enable-flow-control &optional arg
+When @var{arg} is a positive integer, this function enables use of
+@kbd{C-s} and @kbd{C-q} for output flow control, and provides the
+characters @kbd{C-\} and @kbd{C-^} as aliases for them using
+@code{keyboard-translate-table} (@pxref{Translating Input}).
+
+When @var{arg} is a negative integer or zero, it disables these
+features. When @var{arg} is @code{nil} or omitted, it toggles.
+Interactively, @var{arg} is the prefix argument. If non-@code{nil},
+its numeric value is used.
@end deffn
You can use the function @code{enable-flow-control-on} in your
@item
@cindex @sc{cbreak}
It sets @sc{cbreak} mode for terminal input, and tells the operating
-system to handle flow control, with @code{(set-input-mode nil t)}.
+system to handle flow control. This is done using @code{set-input-mode}.
@item
It sets up @code{keyboard-translate-table} to translate @kbd{C-\} and
Emacs supports saving state by using a hook called
@code{emacs-save-session-functions}. Each function in this hook is
called when the session manager tells Emacs that the window system is
-shutting down. The functions are called with the current buffer set
-to a temporary buffer. Each functions can use @code{insert} to add
-Lisp code to this buffer. At the end, Emacs saves the buffer in a
-file that Emacs will load in order to restart the saved session.
+shutting down. The functions are called with no arguments and with the
+current buffer set to a temporary buffer. Each function can use
+@code{insert} to add Lisp code to this buffer. At the end, Emacs
+saves the buffer in a file that a subsequent Emacs invocation will
+load in order to restart the saved session.
If a function in @code{emacs-save-session-functions} returns
non-@code{nil}, Emacs tells the session manager to cancel the
shutdown.
@end defvar
-Here is an example that just inserts some text into *scratch* when
+Here is an example that just inserts some text into @samp{*scratch*} when
Emacs is restarted by the session manager.
@example
HCoop / bpt / emacs.git / blobdiff