-\input texinfo @c -*-texinfo-*-
+\input texinfo @c -*- mode: texinfo; coding: utf-8; -*-
@c
@c Note: This document requires makeinfo version 4.6 or greater to build.
@c
@c %**end of header
@c Version of the software and manual.
-@set VERSION 8.3
+@set VERSION 8.5
@c Edition of the manual. It is either empty for the first edition or
@c has the form ", nth Edition" (without the quotes).
@set EDITION
-@set UPDATED 2011-09-20
-@set UPDATE-MONTH September, 2011
+@set UPDATED 2013-03-02
+@set UPDATE-MONTH March, 2013
@c Other variables.
@set MH-BOOK-HOME http://rand-mh.sourceforge.net/book/mh
This is version @value{VERSION}@value{EDITION} of @cite{The MH-E
Manual}, last updated @value{UPDATED}.
-Copyright @copyright{} 1995, 2001-2003, 2005-2012 Free Software Foundation, Inc.
+Copyright @copyright{} 1995, 2001--2003, 2005--2013 Free Software
+Foundation, Inc.
@c This dual license has been agreed upon by the FSF.
the section entitled ``GNU Free Documentation License.''
(a) The FSF's Back-Cover Text is: ``You have the freedom to copy and
-modify this GNU manual. Buying copies from the FSF supports it in
-developing GNU and promoting software freedom.''
+modify this GNU manual.''
@item
the GNU General Public License as published by the Free Software
This manual introduces another interface to the MH mail system that is
accessible through the GNU Emacs editor, namely, @emph{MH-E}. MH-E is
easy to use. I don't assume that you know GNU Emacs or even MH at this
-point, since I didn't know either of them when I discovered MH-E.
+point, since I didn't know either of them when I discovered MH-E@.
However, MH-E was the tip of the iceberg, and I discovered more and
more niceties about GNU Emacs and MH@. Now I'm fully hooked on both of
them.
The MH-E package is distributed with Emacs@footnote{Version
-@value{VERSION} of MH-E appeared in Emacs 24.1. It is supported in GNU
+@value{VERSION} of MH-E appeared in Emacs 24.4. It is supported in GNU
Emacs 23 and higher, as well as XEmacs 21.4.22 and 21.5.31. MH-E is
known not to work with GNU Emacs versions 20 and below, and XEmacs
-version 21.5.9 - 21.5.16. It is compatible with MH versions 6.8.4 and
+version 21.5.9--21.5.16. It is compatible with MH versions 6.8.4 and
higher, all versions of nmh, and GNU mailutils 1.0 and higher}, so you
shouldn't have to do anything special to use it. Gnus is also
required; version 5.10 or higher is recommended. This manual covers
@cite{GNU Emacs Manual},
@end iftex
@ifinfo
-@ref{top, , GNU Emacs Manual, emacs, GNU Emacs Manual},
+@ref{Top, , GNU Emacs Manual, emacs, GNU Emacs Manual},
@end ifinfo
@ifhtml
-@uref{http://www.gnu.org/software/emacs/manual/html_node/,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/,
@cite{GNU Emacs Manual}},
@end ifhtml
from the Free Software Foundation.
@command{info} command (@samp{info mh-e}) or within Emacs (@kbd{C-h i
m mh-e @key{RET}}). The online version is available at
@uref{http://mh-e.sourceforge.net/manual/, SourceForge}. Another great
-online resource is the book @uref{http://www.ics.uci.edu/~mh/book/,
-@cite{MH & nmh: Email for Users & Programmers}} (also known as
-@dfn{the MH book}).
+online resource is the book
+@uref{http://rand-mh.sourceforge.net/book/, @cite{MH & nmh: Email for
+Users & Programmers}} (also known as @dfn{the MH book}).
I hope you enjoy this manual! If you have any comments, or suggestions
for this document, please let me know.
@end ifnothtml
@ifhtml
See section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Easy-Customization.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Easy-Customization.html,
Easy Customization} in @cite{The GNU Emacs Manual}.
@end ifhtml
@xref{Options}.
@end ifnothtml
@ifhtml
See section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Face-Customization.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Face-Customization.html,
Face Customization} in @cite{The GNU Emacs Manual}.
@end ifhtml
@end ifnothtml
@ifhtml
See section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Hooks.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Hooks.html,
Hooks} in @cite{The GNU Emacs Manual}
@end ifhtml
for a description about @dfn{normal hooks} and @dfn{abnormal hooks}.
MH-E uses normal hooks in nearly all cases, so you can assume that we
are talking about normal hooks unless we explicitly mention that a
hook is abnormal. We also follow the conventions described in that
-section: the name of the abnormal hooks end in @code{-hooks} and all
+section: the name of the abnormal hooks end in @code{-functions} and all
the rest of the MH-E hooks end in @code{-hook}. You can add hooks with
either @code{customize-option} or @code{add-hook}.
@end ifnothtml
@ifhtml
See the section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Completion.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Completion.html,
Completion} in @cite{The GNU Emacs Manual}.
@end ifhtml
Note that @key{SPC} cannot be used for completing filenames and
If the @code{mh-version} command displays @samp{No MH variant
detected}@footnote{In very old versions of MH-E, you may get the error
message, @samp{Cannot find the commands `inc' and `mhl' and the file
-`components'} if MH-E can't find MH. In this case, you need to update
+`components'} if MH-E can't find MH@. In this case, you need to update
MH-E, and you may need to install MH too. However, newer versions of
MH-E are better at finding MH if it is on your system.}, then you need
to install MH or tell MH-E where to find MH.
@cindex GNU mailutils MH
If you don't have MH on your system already, you must install a
-variant of MH. The Debian mh-e package does this for you automatically
-(@pxref{Getting MH-E}). Most people use
+variant of MH@. The Debian mh-e package does this for you
+automatically (@pxref{Getting MH-E}). Most people use
@uref{http://www.nongnu.org/nmh/, nmh}, but you may be interested in
-trying out @uref{http://www.gnu.org/software/mailutils/, GNU mailutils
-MH}, which supports IMAP. Your GNU/Linux distribution probably has
-packages for both of these.
+trying out @uref{http://mailutils.org/, GNU mailutils MH}, which
+supports IMAP@. Your GNU/Linux distribution probably has packages for
+both of these.
@cindex @command{install-mh}
@cindex MH commands, @command{install-mh}
names.}. When you're done, you'll be able to send, read, and file
mail, which is all that a lot of people ever do. But if you're the
curious or adventurous type, read the rest of the manual to be able to
-use all the features of MH-E. I suggest you read this chapter first to
+use all the features of MH-E@. I suggest you read this chapter first to
get the big picture, and then you can read the manual as you wish.
@menu
@footnote{The @cite{GNU Emacs Lisp Reference Manual} may be available
online in the Info system by typing @kbd{C-h i m Emacs Lisp
@key{RET}}. It is also available online at @*
-@uref{http://www.gnu.org/software/emacs/elisp-manual/html_node/}. You
-can also order a printed manual, which has the desirable side-effect
-of helping to support the Free Software Foundation which made all this
-great software available. You can find an order form by running
-@kbd{C-h C-d}, or you can request an order form from @i{gnu at
-gnu.org}.}
+@uref{http://www.gnu.org/software/emacs/manual/elisp.html}.}
@end iftex
@ifinfo
@footnote{@xref{Top, The GNU Emacs Lisp Reference Manual, , elisp, GNU
Emacs Lisp Reference Manual}, which may be available online in the
Info system. It is also available online at
-@uref{http://www.gnu.org/software/emacs/elisp-manual/html_node/}. You
-can also order a printed manual, which has the desirable side-effect
-of helping to support the Free Software Foundation which made all this
-great software available. You can find an order form by running
-@kbd{C-h C-d}, or you can request an order form from @i{gnu at
-gnu.org}.}
+@uref{http://www.gnu.org/software/emacs/manual/elisp.html}.}
@end ifinfo
@ifhtml
@footnote{The
-@uref{http://www.gnu.org/software/emacs/elisp-manual/html_node/,
+@uref{http://www.gnu.org/software/emacs/manual/elisp.html,
The GNU Emacs Lisp Reference Manual} may also be available online in
-the Info system by typing @kbd{C-h i m Emacs Lisp @key{RET}}. You can
-also order a printed manual, which has the desirable side-effect of
-helping to support the Free Software Foundation which made all this
-great software available. You can find an order form by running
-@kbd{C-h C-d}, or you can request an order form from @i{gnu at
-gnu.org}.}
+the Info system by typing @kbd{C-h i m Emacs Lisp @key{RET}}.}
@end ifhtml
and you can look at the code itself for examples. Look in the Emacs
Lisp directory on your system (such as
-@file{/usr/local/lib/emacs/lisp/mh-e}) and find all the @file{mh-*.el}
+@file{/usr/local/share/emacs/lisp/mh-e}) and find all the @file{mh-*.el}
files there. When calling MH-E and other Emacs Lisp functions directly
from Emacs Lisp code, you'll need to know the correct arguments. Use
the online help for this. For example, try @kbd{C-h f
@end ifnothtml
@ifhtml
(see the section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Completion.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Completion.html,
Completion} in @cite{The GNU Emacs Manual}).
@end ifhtml
In addition, MH-E has several ways of choosing a suitable default so
@samp{+inbox} in MH-Folder mode. The command @kbd{M-x mh-rmail} shows
you only new mail, not mail you have already read@footnote{If you want
to see your old mail as well, use @kbd{F r} to pull all your messages
-into MH-E. Or, give a prefix argument to @code{mh-rmail} so it will
+into MH-E@. Or, give a prefix argument to @code{mh-rmail} so it will
prompt you for folder to visit like @kbd{F v} (for example, @kbd{C-u
M-x mh-rmail @key{RET} bob @key{RET}}). @xref{Folders}.}.
suffix; otherwise, the element can be used to render invisible an
entire class of fields that start with the same prefix. If you think a
header field should be generally ignored, please update
-@uref{https://sourceforge.net/tracker/index.php?func=detail&aid=1916032&group_id=13357&atid=113357,
-SF #1916032}.
+@uref{https://sourceforge.net/p/mh-e/bugs/245/, SF #245}.
@cindex header field, @samp{Face:}
@cindex header field, @samp{X-Face:}
@samp{X-Face:} fields are present@footnote{The display of the images
requires the @uref{http://www.gnu.org/software/wget/wget.html,
@command{wget} program} to fetch the image and the @command{convert}
-program from the @uref{http://www.imagemagick.org/, ImageMagick
-suite}.}. Of the three header fields this is the most efficient in
-terms of network usage since the image doesn't need to be transmitted
-with every single mail. The option @code{mh-fetch-x-image-url}
-controls the fetching of the @samp{X-Image-URL:} header field image
-with the following values:
+program from the @uref{http://www.imagemagick.org/script/index.php,
+ImageMagick suite}.}. Of the three header fields this is the most
+efficient in terms of network usage since the image doesn't need to be
+transmitted with every single mail. The option
+@code{mh-fetch-x-image-url} controls the fetching of the
+@samp{X-Image-URL:} header field image with the following values:
@table @samp
@item Ask Before Fetching
reader. Most of the time, this is desirable, so by default MH-E
suppresses the buttons for inline attachments. On the other hand, you
may receive code or HTML which the sender has added to his message as
-inline attachments so that you can read them in MH-E. In this case, it
+inline attachments so that you can read them in MH-E@. In this case, it
is useful to see the buttons so that you know you don't have to cut
and paste the code into a file; you can simply save the attachment. If
you want to make the buttons visible for inline attachments, you can
@end ifinfo
@ifhtml
See
-@uref{http://www.dk.xemacs.org/Documentation/packages/html/pgg.html,
+@uref{http://www.gnu.org/software/emacs/manual/pgg.html,
@cite{The PGG Manual}}.
@end ifhtml
@cindex menu, @samp{Message}
@cindex using folders
-This chapter discusses the things you can do with folders within MH-E.
+This chapter discusses the things you can do with folders within MH-E@.
The commands in this chapter are also found in the @samp{Folder} and
@samp{Message} menus.
@findex mh-search-p
@kindex k
-@vindex mh-kill-folder-suppress-prompt-hooks
+@vindex mh-kill-folder-suppress-prompt-functions
-The hook @code{mh-kill-folder-suppress-prompt-hooks} is an abnormal
+The hook @code{mh-kill-folder-suppress-prompt-functions} is an abnormal
hook run at the beginning of the command @kbd{k}. The hook functions
are called with no arguments and should return a non-nil value to
suppress the normal prompt when you remove a folder. This is useful
The attribution consists of the sender's name and email address
followed by the content of the option
@code{mh-extract-from-attribution-verb}. This option can be set to
-@samp{wrote:}, @samp{a écrit:}, and @samp{schrieb:}. You can also use
+@samp{wrote:}, @samp{a écrit:}, and @samp{schrieb:}. You can also use
the @samp{Custom String} menu item to enter your own verb.
@vindex mail-citation-hook
@vindex mh-yank-behavior
For example, if you use the hook function
-@uref{http://shasta.cs.uiuc.edu/~lrclause/tc.html,
+@uref{http://www.emacswiki.org/emacs/TrivialCite,
@code{trivial-cite}} (which is NOT part of Emacs), set
@code{mh-yank-behavior} to @samp{Body and Header}.
@end ifinfo
@ifhtml
See
-@uref{http://www.dk.xemacs.org/Documentation/packages/html/pgg.html,
+@uref{http://www.gnu.org/software/emacs/manual/pgg.html,
@cite{The PGG Manual}}.
@end ifhtml
you can check the actual address(es) in the alias. A new buffer named
@samp{*MH-E Recipients*} is created with the output of @command{whom}
(@pxref{Miscellaneous})@footnote{See the section
-@uref{@value{MH-BOOK-HOME}/senove.html#WhaPro, What now? -- and the
+@uref{@value{MH-BOOK-HOME}/senove.html#WhaPro, What now?---and the
whatnow Program} in the MH book.}.
@node Sending Message, Killing Draft, Checking Recipients, Editing Drafts
@cindex aliases
-MH aliases are used in the same way in MH-E as they are in MH. Any
+MH aliases are used in the same way in MH-E as they are in MH@. Any
alias listed as a recipient will be expanded when the message is sent.
This chapter discusses other things you can do with aliases in MH-E.
@vindex mh-alias-completion-ignore-case-flag
-As MH ignores case in the aliases, so too does MH-E. However, you may
+As MH ignores case in the aliases, so too does MH-E@. However, you may
turn off the option @code{mh-alias-completion-ignore-case-flag} to
make case significant which can be used to segregate completion of
your aliases. You might use uppercase for mailing lists and lowercase
@end ifnothtml
@ifhtml
(see the section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Regexps.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Regexps.html,
Syntax of Regular Expressions} in
@cite{The GNU Emacs Manual}).
@end ifhtml
@end ifnothtml
@ifhtml
(see the section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Regexps.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Regexps.html,
Syntax of Regular Expressions} in
@cite{The GNU Emacs Manual}).
@end ifhtml
@end ifnothtml
@ifhtml
(see the section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Speedbar.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Speedbar.html,
Speedbar Frames} in @cite{The GNU Emacs Manual})
@end ifhtml
to view your folders. To bring up the speedbar, run @kbd{M-x speedbar
@end ifnothtml
@ifhtml
see the section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Menu-Bar.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Menu-Bar.html,
The Menu Bar} in @cite{The GNU Emacs Manual}.
@end ifhtml
@end ifnothtml
@ifhtml
see the section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Tool-Bars.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Tool-Bars.html,
Tool Bars} in @cite{The GNU Emacs Manual}.
@end ifhtml
@cindex @command{mairix}
@cindex Unix commands, @command{mairix}
-In the examples below, replace @file{/home/user/Mail} with the path to
-your MH directory.
+In the examples below, replace @file{~/Mail} with the path to your MH
+directory.
-First create the directory @file{/home/user/Mail/.mairix}. Then create
-the file @file{/home/user/Mail/.mairix/config} with the following
-contents:
+First create the directory @file{~/Mail/.mairix}. Then create the file
+@file{~/Mail/.mairix/config} with the following contents:
@smallexample
@group
-base=/home/user/Mail
+base=~/Mail
# List of folders that should be indexed. 3 dots at the end means there
# are subfolders within the folder
mh=archive...:inbox:drafts:news:sent:trash
-vfolder_format=mh
-database=/home/user/Mail/.mairix/database
+mformat=mh
+database=~/Mail/.mairix/database
@end group
@end smallexample
from cron:
@smallexample
-mairix -f /home/user/Mail/.mairix/config
+mairix -f ~/Mail/.mairix/config
@end smallexample
@subsection namazu
@item mh-update-sequences-after-mh-show-flag
On means flush MH sequences to disk after message is shown (default:
@samp{on}).
+@item mh-whitelist-preserves-sequences-flag
+On means that sequences are preserved when messages are whitelisted
+(default: @samp{on}).
@end vtable
The following hook is available.
Spam program that MH-E should use (default: @samp{Auto-detect}).
@end vtable
+@cindex @samp{mh-sequences} customization group
+@cindex customization group, @samp{mh-sequences}
+
+The following option in the @samp{mh-sequences} customization group is
+also available.
+
+@vtable @code
+@item mh-whitelist-preserves-sequences-flag
+On means that sequences are preserved when messages are whitelisted
+(default: @samp{on}).
+@end vtable
+
+The following hooks are available.
+
+@vtable @code
+@item mh-blacklist-msg-hook
+Hook run by @kbd{J b} (@code{mh-junk-blacklist}) after marking each
+message for blacklisting (default: @code{nil}).
+@c -------------------------
+@item mh-whitelist-msg-hook
+Hook run by @kbd{J w} (@code{mh-junk-whitelist}) after marking each
+message for whitelisting (default @samp{nil}).
+@end vtable
+
+The following faces are available.
+
+@vtable @code
+@item mh-folder-blacklisted
+Blacklisted message face.
+@c -------------------------
+@item mh-folder-whitelisted
+Whitelisted message face
+@end vtable
+
@cindex SpamProbe
@cindex Spamassassin
@cindex bogofilter
incorrectly classified as spam. It then refiles the message into the
@file{+inbox} folder.
+@cindex MH profile component, @samp{Previous-Sequence:}
+@cindex @samp{cur} sequence
+@cindex @samp{Previous-Sequence:} MH profile component
+@cindex sequence, @samp{cur}
+@cindex sequence, @samp{Previous-Sequence}
+@vindex mh-whitelist-preserves-sequences-flag
+
+If a message is in any sequence (except @samp{Previous-Sequence:} and
+@samp{cur}) when it is whitelisted, then it will still be in those
+sequences in the destination folder. If this behavior is not desired,
+then turn off the option @code{mh-whitelist-preserves-sequences-flag}.
+
@cindex @samp{*MH-E Log*}
@cindex buffers, @samp{*MH-E Log*}
@findex call-process
conservative. Add that many dots to the @samp{X-Spam-Level:} header
field above to send messages with that score down the drain.
-In the example above, messages with a score of 5-9 are set aside in
+In the example above, messages with a score of 5--9 are set aside in
the @samp{+spam} folder for later review. The major weakness of
rules-based filters is a plethora of false positives so it is
worthwhile to check.
@end ifnothtml
@ifhtml
section
-@uref{http://www.gnu.org/software/emacs/manual/html_node/Regexps.html,
+@uref{http://www.gnu.org/software/emacs/manual/html_node/emacs/Regexps.html,
Syntax of Regular Expressions} in @cite{The GNU Emacs Manual}.
@end ifhtml
[12]
[13] # Place mail sent to any MH-E mailing list in +mh-e.
[14] :0 w: mh-e$LOCKEXT
-[15] * ^TO.*mh-e-.*@.*sourceforge.net
+[15] * ^TO.*mh-e-.*@@.*sourceforge.net
[16] | myrcvstore -create +mh-e
@end smallexample
@vtable @code
@item gnus-secondary-select-methods
Select the @samp{nnml} value. This select method uses directories for
-folders and individual files for messages, just like MH. You do not
+folders and individual files for messages, just like MH@. You do not
have to set an address.
@c -------------------------
@item mail-sources
Since Gnus keeps track of which messages you have read, it would be
bad if Gnus expired the last message, for example, message 100, and
@command{rcvstore} gave the next new message number 1. Gnus would then
-ignore it since it thinks that you've read messages 1-100. Turning on
+ignore it since it thinks that you've read messages 1--100. Turning on
this option ensures that the last message is never removed thereby
eliminating this problem.
@end vtable
# Place mail sent to the GnuCash mailing list in gnucash.spool, where
# Gnus will pick it up.
:0:
-* ^TO.*gnucash.*@.*gnucash.org
+* ^TO.*gnucash.*@@.*gnucash.org
gnucash.spool
@end smallexample
@kindex M-x mh-version
Bug reports should be filed at
-@uref{https://sourceforge.net/tracker/?group_id=13357&atid=113357,
-SourceForge}. You need to be a SourceForge user to submit bug reports,
-but this is easy enough to do that it shouldn't be a restriction for
-you. Please include the output of @kbd{M-x mh-version}
-(@pxref{Miscellaneous}) in any bug report you send unless you're 110%
-positive we won't ask for it.
+@uref{https://sourceforge.net/p/mh-e/bugs/, SourceForge}. You need to
+be a SourceForge user to submit bug reports, but this is easy enough
+to do that it shouldn't be a restriction for you. Please include the
+output of @kbd{M-x mh-version} (@pxref{Miscellaneous}) in any bug
+report you send unless you're 110% positive we won't ask for it.
@node Mailing Lists, MH FAQ and Support, Bug Reports, Odds and Ends
@appendixsec MH-E Mailing Lists
@cindex SourceForge
@cindex mailing lists
-There are several mailing lists for MH-E. They are @i{mh-e-users at
+There are several mailing lists for MH-E@. They are @i{mh-e-users at
lists.sourceforge.net}, @i{mh-e-announce at lists.sourceforge.net},
and @i{mh-e-devel at lists.sourceforge.net}. You can subscribe or view
-the archives at @uref{https://sourceforge.net/mail/?group_id=13357,
+the archives at @uref{https://sourceforge.net/p/mh-e/mailman/,
SourceForge}. Do not report bugs on these lists; please submit them
via SourceForge (@pxref{Bug Reports}).
@cindex support
-You can find FAQs on MH-E at the
-@uref{https://sourceforge.net/tracker/?group_id=13357&atid=213357,
-Support Requests} page on SourceForge. If you don't find the answer to
-your question, file a support request and your question will become a
-new FAQ!
+You can find FAQs on MH-E by searching for @i{labels:support} on the
+@uref{https://sourceforge.net/p/mh-e/bugs/search/?q=labels%3Asupport,
+Tickets} page on SourceForge. If you don't find the answer to your
+question, file a ticket and your question will become a new FAQ!
@node Getting MH-E, , MH FAQ and Support, Odds and Ends
@appendixsec Getting MH-E
@cindex release notes
New MH-E releases are always available for downloading at
-@uref{https://sourceforge.net/project/showfiles.php?group_id=13357,
-SourceForge} before they appear in an Emacs release. You can read the
-release notes on that page to determine if the given release of MH-E
-is already installed in your version of Emacs. You can also read the
-change log to see if you are interested in what the given release of
-MH-E has to offer (although we have no doubt that you will be
-extremely interested in all new releases).
+@uref{https://sourceforge.net/projects/mh-e/files/, SourceForge}
+before they appear in an Emacs release. You can read the release notes
+on that page to determine if the given release of MH-E is already
+installed in your version of Emacs. You can also read the change log
+to see if you are interested in what the given release of MH-E has to
+offer (although we have no doubt that you will be extremely interested
+in all new releases).
@cindex Debian
After you download and extract the MH-E tarball, read the
@file{README} file and @file{MH-E-NEWS}. These correspond to the
release notes and change log mentioned above. The file @file{README}
-contains instructions on installing MH-E. If you're already running
+contains instructions on installing MH-E@. If you're already running
Emacs, please quit that session and start again to load in the new
-MH-E. Check that you're running the new version with the command
+MH-E@. Check that you're running the new version with the command
@kbd{M-x mh-version}.
@cindex contributed software
@cindex documentation
In addition to the mh-e package, the
-@uref{https://sourceforge.net/project/showfiles.php?group_id=13357,
-SourceForge} site also contains doc and contrib packages. The former
-is the latest release of this manual, and the latter contains a few
-contributed packages you might find useful.
+@uref{https://sourceforge.net/projects/mh-e/files/, SourceForge} site
+also contains doc and contrib packages. The former is the latest
+release of this manual, and the latter contains a few contributed
+packages you might find useful.
@node History, GFDL, Odds and Ends, Top
@appendix History of MH-E
simpler and the commands were slightly different. Unfortunately, I no
longer have a copy so the differences are lost in the mists of time.
-In '82-83, I was working at BBN and wrote a lot of mlisp code in
+In '82--83, I was working at BBN and wrote a lot of mlisp code in
Gosling Emacs to make it look more like Tennex Emacs. One of the
packages that I picked up and improved was Reid's mail system. In '83,
I went back to Berkeley. About that time, Stallman's first version of
@cindex @command{xmh}, in MH-E history
In '89, I came to Wisconsin as a professor and decided not to work on
-MH-E. It was stable, except for minor bugs, and had enough
+MH-E@. It was stable, except for minor bugs, and had enough
functionality, so I let it be for a few years. Stephen Gildea of BBN
began to pester me about the bugs, but I ignored them. In 1990, he
went off to the X Consortium, said good bye, and said that he would
now be using @command{xmh}. A few months later, he came back and said
that he couldn't stand @command{xmh} and could I put a few more bug fixes
-into MH-E. At that point, I had no interest in fixing MH-E, so I gave
+into MH-E@. At that point, I had no interest in fixing MH-E, so I gave
the responsibility of maintenance to him and he has done a fine job
since then.
embedded editors; they never live up to Emacs.
MH is the mail reader of choice at BBN, so I converted to it. Since I
-didn't want to give up using an Emacs interface, I started using MH-E.
+didn't want to give up using an Emacs interface, I started using MH-E@.
As is my wont, I started hacking on it almost immediately. I first
used version 3.4m. One of the first features I added was to treat the
folder buffer as a file-visiting buffer: you could lock it, save it,
with Emacs 18.56 in 1990, was noticeably faster.
When I moved to the X Consortium I became the first person there to
-not use xmh. (There is now one other engineer there using MH-E.) About
+not use xmh. (There is now one other engineer there using MH-E@.) About
this point I took over maintenance of MH-E from Jim and was finally
able to add some features Jim hadn't accepted, such as the backward
searching undo. My first release was 3.8 (Emacs 18.58) in 1992.
HCoop / bpt / emacs.git / blobdiff