\input texinfo @c -*-texinfo-*-
-@setfilename message
+@setfilename ../info/message
@settitle Message 5.9.0 Manual
@synindex fn cp
@synindex vr cp
@synindex pg cp
-@dircategory Editors
+@dircategory Emacs
@direntry
* Message: (message). Mail and news composition mode that goes with Gnus.
@end direntry
This file documents Message, the Emacs message composition mode.
-Copyright (C) 1996,97,98,99,2000 Free Software Foundation, Inc.
+Copyright (C) 1996,97,98,99,2000,2001 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with the
-Invariant Sections being none, with the Front-Cover texts being ``A GNU
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
license is included in the section entitled ``GNU Free Documentation
-License''.
+License'' in the Emacs manual.
(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
this GNU Manual, like GNU software. Copies published by the Free
Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end ifnottex
@tex
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1996,97,98,99,2000 Free Software Foundation, Inc.
+Copyright @copyright{} 1996,97,98,99,2000,2001 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
Invariant Sections being none, with the Front-Cover texts being ``A GNU
Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
license is included in the section entitled ``GNU Free Documentation
-License''.
+License'' in the Emacs manual.
(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
this GNU Manual, like GNU software. Copies published by the Free
Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end titlepage
@page
@chapter Commands
@menu
+* Buffer Entry:: Commands after entering a Message buffer.
* Header Commands:: Commands for moving to headers.
* Movement:: Moving around in message buffers.
* Insertion:: Inserting things into message buffers.
* Various Commands:: Various things.
* Sending:: Actually sending the message.
* Mail Aliases:: How to use mail aliases.
+* Spelling:: Having Emacs check your spelling.
@end menu
+@node Buffer Entry
+@section Buffer Entry
+@cindex undo
+@kindex C-_
+
+You most often end up in a Message buffer when responding to some other
+message of some sort. Message does lots of handling of quoted text, and
+may remove signatures, reformat the text, or the like---depending on
+which used settings you're using. Message usually gets things right,
+but sometimes it stumbles. To help the user unwind these stumblings,
+Message sets the undo boundary before each major automatic action it
+takes. If you press the undo key (usually located at @kbd{C-_}) a few
+times, you will get back the un-edited message you're responding to.
+
+
@node Header Commands
@section Header Commands
@findex message-goto-bcc
Go to the @code{Bcc} header (@code{message-goto-bcc}).
-@item C-c C-f C-f
-@kindex C-c C-f C-f
+@item C-c C-f C-w
+@kindex C-c C-f C-w
@findex message-goto-fcc
Go to the @code{Fcc} header (@code{message-goto-fcc}).
@findex message-goto-distribution
Go to the @code{Distribution} header (@code{message-goto-distribution}).
-@item C-c C-f C-o
-@kindex C-c C-f C-o
+@item C-c C-f C-f
+@kindex C-c C-f C-f
@findex message-goto-followup-to
Go to the @code{Followup-To} header (@code{message-goto-followup-to}).
Yank the message that's being replied to into the message buffer
(@code{message-yank-original}).
-@item C-c M-C-y
-@kindex C-c M-C-y
+@item C-c C-M-y
+@kindex C-c C-M-y
@findex message-yank-buffer
Prompt for a buffer name and yank the contents of that buffer into the
message buffer (@code{message-yank-buffer}).
@item message-signature-file
@vindex message-signature-file
-File containing the signature to be inserted at the end of the buffer.
-The default is @samp{~/.signature}.
+If non-@code{nil} the name of a file containing the signature to be
+inserted at the end of the buffer. This is ignored if the file
+doesn't exist. The default is @samp{~/.signature}.
@end table
expansions have to be done explicitly.
+@node Spelling
+@section Spelling
+@cindex spelling
+@findex ispell-message
+
+There are two popular ways to have Emacs spell-check your messages:
+@code{ispell} and @code{flyspell}. @code{ispell} is the older and
+probably more popular package. You typically first write the message,
+and then run the entire thing through @code{ispell} and fix all the
+typos. To have this happen automatically when you send a message, put
+something like the following in your @file{.emacs} file:
+
+@lisp
+(add-hook 'message-send-hook 'ispell-message)
+@end lisp
+
+@vindex ispell-message-dictionary-alist
+If you're in the habit of writing in different languages, this can be
+controlled by the @code{ispell-message-dictionary-alist} variable:
+
+@lisp
+(setq ispell-message-dictionary-alist
+ '(("^Newsgroups:.*\\bde\\." . "deutsch8")
+ (".*" . "default")))
+@end lisp
+
+@code{ispell} depends on having the external @samp{ispell} command
+installed.
+
+The other popular method is using @code{flyspell}. This package checks
+your spelling while you're writing, and marks any mis-spelled words in
+various ways.
+
+To use @code{flyspell}, put something like the following in your
+@file{.emacs} file:
+
+@lisp
+(defun my-message-setup-routine ()
+ (flyspell-mode 1))
+(add-hook 'message-setup-hook 'my-message-setup-routine)
+@end lisp
+
+@code{flyspell} depends on having the external @samp{ispell} command
+installed.
+
@node Variables
@chapter Variables
@item message-generate-headers-first
@vindex message-generate-headers-first
-If non-@code{nil}, generate all headers before starting to compose the
-message.
+If non-@code{nil}, generate all required headers before starting to
+compose the message.
+
+The variables @code{message-required-mail-headers} and
+@code{message-required-news-headers} specify which headers are required.
@item message-from-style
@vindex message-from-style
@item message-subject-re-regexp
@vindex message-subject-re-regexp
Responses to messages have subjects that start with @samp{Re: }. This
-is @emph{not} an abbreviation of the English word ``response'', but in
+is @emph{not} an abbreviation of the English word ``response'', but is
Latin, and means ``in response to''. Some illiterate nincompoops have
failed to grasp this fact, and have ``internationalized'' their software
to use abonimations like @samp{Aw: } (``antwort'') or @samp{Sv: }
set this variable to a regexp that matches these prefixes. Myself, I
just throw away non-compliant mail.
+@item message-alternative-emails
+@vindex message-alternative-emails
+A regexp to match the alternative email addresses. The first matched
+address (not primary one) is used in the @code{From} field.
+
@end table
@vindex message-required-mail-headers
@xref{News Headers}, for the syntax of this variable. It is
@code{(From Date Subject (optional . In-Reply-To) Message-ID Lines
-(optional . X-Mailer))} by default.
+(optional . User-Agent))} by default.
@item message-ignored-mail-headers
@vindex message-ignored-mail-headers
Regexp of headers to be removed before mailing. The default is
-@samp{^[GF]cc:\\|^Resent-Fcc:}.
+@samp{^[GF]cc:\|^Resent-Fcc:\|^Xref:}.
@item message-default-mail-headers
@vindex message-default-mail-headers
messages via MH. Set it to @code{nil} if your MH can handle these
headers.
+@item message-send-mail-partially-limit
+@vindex message-send-mail-partially-limit
+The limit on the size of messages sent as @samp{message/partial}.
+This is the minimum message size in characters beyond which the
+message should be sent in several parts. If it is @code{nil}, the
+size is unlimited.
+
@end table
this isn't a fully qualified domain name (FQDN), Message will use
@code{mail-host-address} as the FQDN of the machine.
-@item X-Newsreader
-@cindex X-Newsreader
+@item User-Agent
+@cindex User-Agent
This optional header will be filled out according to the
@code{message-newsreader} local variable.
-@item X-Mailer
-This optional header will be filled out according to the
-@code{message-mailer} local variable, unless there already is an
-@code{X-Newsreader} header present.
-
@item In-Reply-To
This optional header is filled out using the @code{Date} and @code{From}
header of the article being replied to.
@lisp
(add-hook 'message-send-hook 'my-message-add-content)
(defun my-message-add-content ()
- (message-add-header
- "X-In-No-Sense: Nonsense"
- "X-Whatever: no"))
+ (message-add-header "X-In-No-Sense: Nonsense")
+ (message-add-header "X-Whatever: no"))
@end lisp
This function won't add the header if the header is already present.
@vindex message-fcc-handler-function
A function called to save outgoing articles. This function will be
called with the name of the file to store the article in. The default
-function is @code{message-output} which saves in Unix mailbox format.
+function is @code{message-output} which saves in inbox format.
@item message-courtesy-message
@vindex message-courtesy-message
HCoop / bpt / emacs.git / blobdiff