-# DIST: This is the distribution Makefile for Emacs. configure can
-# DIST: make most of the changes to this file you might want, so try
-# DIST: that first.
+### @configure_input@
-# Copyright (C) 1992-2012 Free Software Foundation, Inc.
+# Copyright (C) 1992-2013 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
# clean slate, and then build in the normal way.
+#
+# make docs
+# Make Emacs documentation files from their sources; requires makeinfo.
SHELL = /bin/sh
# If Make doesn't predefine MAKE, set it here.
@SET_MAKE@
+# Prevent submakes from outputting "Entering directory ..." and
+# "Leaving directory..." diagnostics that would mess up 'make echo-info'.
+QUIET_SUBMAKE = MAKELEVEL=0
+
# ==================== Things `configure' Might Edit ====================
-MAINTAINER_MODE_FLAG = --disable-maintainer-mode
-@MAINT@MAINTAINER_MODE_FLAG = --enable-maintainer-mode
cache_file = @cache_file@
-CONFIGURE_FLAGS = --cache-file=$(cache_file) $(MAINTAINER_MODE_FLAG)
+CONFIGURE_FLAGS = --cache-file=$(cache_file)
CC=@CC@
CFLAGS=@CFLAGS@
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@
+### The nt/ subdirectory gets built only for MinGW
+NTDIR=@NTDIR@
+
# ==================== Where To Install Things ====================
# Location to install Emacs.app under GNUstep / Mac OS X.
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
-# Where to install the lisp files distributed with
+# Where to install the lisp, leim files distributed with
# Emacs. This includes the Emacs version, so that the
# lisp files for different versions of Emacs will install
# themselves in separate directories.
lispdir=@lispdir@
+leimdir=@leimdir@
+
+# Directories Emacs should search for standard lisp files.
+# The default is ${lispdir}:${leimdir}.
+standardlisppath=@standardlisppath@
-# Directories Emacs should search for lisp files specific
-# to this site (i.e. customizations), before consulting
-# ${lispdir}. This should be a colon-separated list of
-# directories.
+# Directories Emacs should search for lisp files specific to this
+# site (i.e. customizations), before consulting ${standardlisppath}.
+# This should be a colon-separated list of directories.
locallisppath=@locallisppath@
# Where Emacs will search to find its lisp files. Before
# changing this, check to see if your purpose wouldn't
# better be served by changing locallisppath. This
# should be a colon-separated list of directories.
+# The default is ${locallisppath}:${standardlisppath}.
lisppath=@lisppath@
# Where Emacs will search for its lisp files while
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =
MKDIR_P = @MKDIR_P@
+# Create a link to a file in the same directory as the target.
+LN_S_FILEONLY = @LN_S_FILEONLY@
# We use gzip to compress installed .el files.
GZIP_PROG = @GZIP_PROG@
TRANSFORM = @program_transform_name@
# What emacs should be called when installed.
-EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
-EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
+EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
+EMACS = ${EMACS_NAME}${EXEEXT}
+EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
# Subdirectories to make recursively.
-SUBDIR = lib lib-src src lisp leim
+SUBDIR = $(NTDIR) lib lib-src src lisp leim
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
-# Subdirectories to install, and where they'll go.
-# lib-src's makefile knows how to install it, so we don't do that here.
-# leim's makefile also knows how to install it, so we don't do that here.
-# When installing the info files, we need to do special things to
-# avoid nuking an existing dir file, so we don't do that here;
-# instead, we have written out explicit code in the `install' targets.
-COPYDIR = ${srcdir}/etc ${srcdir}/lisp
-COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
+# Subdirectories to install, and where they'll go. lib-src's and nt's
+# makefiles know how to install them, so we don't do that here.
+# Directories that cannot simply be copied, eg info, are treated
+# separately. quail appears twice because in out-of-tree builds, it
+# exists twice.
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
+COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
all: ${SUBDIR}
-removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
+.PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
+
+removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
# Generate epaths.h from epaths.in. This target is invoked by `configure'.
-# See comments in configure.in for why it is done this way, as opposed
+# See comments in configure.ac for why it is done this way, as opposed
# to just letting configure generate epaths.h from epaths.in in a
# similar way to how Makefile is made from Makefile.in.
epaths-force: FRC
- @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
- buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
+ @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
+ locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
+ buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
x_default_search_path=`echo ${x_default_search_path}`; \
gamedir=`echo ${gamedir}`; \
sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
- -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";' \
+ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
+ -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
-lib-src src: lib
+# Convert MSYS-style /x/foo or Windows-style x:\foo file names
+# into x:/foo that Windows can grok.
+msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
+
+# Transform directory search path and its components. Original can
+# be MSYS or Windows style. Set path separator to ";", directory
+# separator to "/" and transform MSYS-style "/c/" to "c:/".
+# Remove empty path components and escape semicolons.
+msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \
+ -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \
+ -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \
+ -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
+
+# Replace "${prefix}" with '%emacs_dir%' (which expands to install
+# directory at runtime).
+msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
+
+# Quote Sed special characters (except backslash and newline) with
+# a double backslash.
+msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
+
+# The w32 build needs a slightly different editing, and it uses
+# nt/epaths.nt as the template.
+# Use the value of ${locallisppath} supplied by `configure',
+# to support the --enable-locallisppath argument.
+epaths-force-w32: FRC
+ @(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ; \
+ prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
+ locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
+ sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
+ -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
+ -e '/^.*#/s/@VER@/${version}/g' \
+ -e '/^.*#/s/@CFG@/${configuration}/g' \
+ -e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
+ ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
-src: lib-src FRC
+lib-src src: $(NTDIR) lib
-.RECURSIVE: ${SUBDIR}
+src: lib-src FRC
# We need to build `emacs' in `src' to compile the *.elc files in `lisp'
# and `leim'.
lisp leim: src
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp leim: Makefile FRC
+lib lib-src lisp leim nt: Makefile FRC
cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
VCSWITNESS="$$vcswitness"
blessmail: Makefile src FRC
- cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
+ cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
MAKE='${MAKE}' archlibdir='$(archlibdir)'
# We used to have one rule per */Makefile.in, but that leads to race
# conditions with parallel makes, so let's assume that the time stamp on
# ./Makefile is representative of the time stamp on all the other Makefiles.
-Makefile: config.status $(srcdir)/src/config.in \
- $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
- ./config.status
+#
+# config.status overrides MAKEFILE_NAME with a bogus name when creating
+# src/epaths.h, so that 'make epaths-force' does not recursively invoke
+# config.status and overwrite config.status while executing it (Bug#11214).
+#
+# 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
+# then attempts to build that file. This forces 'Makefile', 'lib/Makefile',
+# etc. to be built without running into similar recursion problems.
+MAKEFILE_NAME = Makefile
+$(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
+ $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
+ MAKE='$(MAKE)' ./config.status
-# Don't erase config.status if make is interrupted while refreshing it.
-.PRECIOUS: config.status
+# Don't erase these files if make is interrupted while refreshing them.
+.PRECIOUS: Makefile config.status
config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
if [ -x ./config.status ]; then \
- ./config.status --recheck; \
+ $(CFG) ./config.status --recheck; \
else \
- ./configure $(CONFIGURE_FLAGS); \
+ $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
fi
-AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/aclocal.m4
+AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
$(srcdir)/configure: $(AUTOCONF_INPUTS)
cd ${srcdir} && autoconf
-ACLOCAL_INPUTS = @MAINT@ $(srcdir)/m4/$(DOS_gnulib_comp.m4)
+ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
$(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
cd $(srcdir) && aclocal -I m4
-AUTOMAKE_INPUTS = @MAINT@ $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am $(srcdir)/lib/gnulib.mk
+AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
+ $(srcdir)/lib/gnulib.mk
$(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
cd $(srcdir) && automake --gnu -a -c lib/Makefile
+
+# Regenerate files that this makefile would have made, if this makefile
+# had been built by Automake. The name 'am--refresh' is for
+# compatibility with subsidiary Automake-generated makefiles.
am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
.PHONY: am--refresh
# ==================== Installation ====================
+.PHONY: install install-arch-dep install-arch-indep install-doc install-info
+.PHONY: install-man install-etc install-strip install-$(NTDIR)
+.PHONY: uninstall uninstall-$(NTDIR)
+
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
-.PHONY: install
-
-install: all install-arch-indep install-doc install-arch-dep blessmail
+install: all install-arch-indep install-doc install-arch-dep install-$(NTDIR) blessmail
@true
## Ensure that $subdir contains a subdirs.el file.
### Install the executables that were compiled specifically for this machine.
### We do install-arch-indep first because the executable needs the
### Lisp files and DOC file to work properly.
-install-arch-dep: install-arch-indep install-doc
+install-arch-dep: src install-arch-indep install-doc install-$(NTDIR)
umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
- (cd lib-src; \
+ cd lib-src && \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
libexecdir=${libexecdir} archlibdir=${archlibdir} \
- INSTALL_STRIP=${INSTALL_STRIP})
+ INSTALL_STRIP=${INSTALL_STRIP}
if test "${ns_self_contained}" = "no"; then \
${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
- chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \
- rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
- ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS) || true ; \
+ chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
+ if test "x${NO_BIN_LINK}" = x; then \
+ rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
+ cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
+ fi; \
else \
subdir=${ns_appresdir}/site-lisp; \
${write_subdir} || exit 1; \
rm -rf ${ns_appresdir}/share; \
fi
+### Windows-specific install target for installing programs produced
+### in nt/, and its Posix do-nothing shadow.
+install-:
+install-nt:
+ cd $(NTDIR) && \
+ $(MAKE) install $(MFLAGS) prefix=${prefix} \
+ exec_prefix=${exec_prefix} bindir=${bindir} \
+ libexecdir=${libexecdir} archlibdir=${archlibdir} \
+ INSTALL_STRIP=${INSTALL_STRIP}
+
## In the share directory, we are deleting:
## applications (with emacs.desktop, also found in etc/)
## emacs (basically empty except for unneeded site-lisp directories)
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
-## I'm not sure creating locallisppath here serves any useful purpose.
-## If it has the default value, then the later write_subdir commands
-## will ensure all these components exist.
-## This will only do something if locallisppath has a non-standard value.
-## Is it really Emacs's job to create those directories?
-## Should we also be ensuring they contain subdirs.el files?
-## It would be easy to do, just use write_subdir.
+## We used to create locallisppath, but if it points to non-standard
+## locations, is not really Emacs's job to create these directories,
+## so it is no longer done.
## Note that we use tar instead of plain old cp -R/-r because the latter
## is apparently not portable (even in 2012!).
## work correctly, and therefore no idea when tar can be replaced.
## See also these comments from 2004 about cp -r working fine:
## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
-install-arch-indep: install-leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
- umask 022 ; \
- $(MKDIR_P) $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'`
+install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
-set ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
[ -d $${dest} ] && \
[ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
continue ; \
- rm -rf $${dest} ; \
- umask 022; ${MKDIR_P} $${dest} ; \
+ if [ "$${dir}" = "leim/quail" ]; then \
+ [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
+ continue ; \
+ else \
+ rm -rf $${dest} ; \
+ umask 022; ${MKDIR_P} $${dest} ; \
+ fi ; \
echo "Copying $${dir} to $${dest}..." ; \
(cd $${dir}; tar -chf - . ) \
| (cd $${dest}; umask 022; \
tar -xvf - && cat > /dev/null) || exit 1; \
[ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
for subdir in `find $${dest} -type d -print` ; do \
+ chmod a+rx $${subdir} ; \
rm -f $${subdir}/.gitignore ; \
rm -f $${subdir}/.arch-inventory ; \
rm -f $${subdir}/.DS_Store ; \
done ; \
find $${dest} -exec chown $${installuser} {} ';' ;\
done
+ -rm -f $(DESTDIR)${leimdir}/leim-list.el
+ ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
-rm -f $(DESTDIR)${lispdir}/subdirs.el
- umask 022; $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
+ umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
${write_subdir}
subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
[ -z "${GZIP_PROG}" ] || \
( echo "Compressing *.el ..." ; \
unset CDPATH; \
- cd $(DESTDIR)${lispdir}; \
- for f in `find . -name "*.elc" -print`; do \
- ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
+ thisdir=`/bin/pwd`; \
+ for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
+ cd $${thisdir} ; \
+ cd $${dir} || exit 1 ; \
+ for f in `find . -name "*.elc" -print`; do \
+ ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
+ done ; \
done )
-chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
-# The last chmod isn't needed at present.
-
-## We install only the relevant DOC file if possible
-## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
-## (Note "otherwise" is inaccurate since 2009-08-23.)
+## The above chmods are needed because "umask 022; tar ..." is not
+## guaranteed to do the right thing; eg if we are root and tar is
+## preserving source permissions.
## Note that install-arch-indep deletes and recreates the entire
## installed etc/ directory, so we need it to run before this does.
-install-doc: install-arch-indep
+install-doc: src install-arch-indep
-unset CDPATH; \
umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
then \
- fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
- if [ -f "./etc/DOC-$${fullversion}" ]; \
- then \
- docfile="DOC-$${fullversion}"; \
- else \
- docfile="DOC"; \
- fi; \
+ docfile="DOC"; \
echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
$(set_installuser); \
[ -f dir ] || \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
- info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
+ info_misc=`cd $${thisdir}/doc/misc && \
+ $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
+ `; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
done)
+## "gzip || true" is because some gzips exit with non-zero status
+## if compression would not reduce the file size. Eg, the gzip in
+## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can
+## only happen with the tiny ctags.1 manpage. We don't really care if
+## ctags.1 is compressed or not. "gzip -f" is another option here,
+## but not sure if portable.
install-man:
umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
+ dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
(cd $${thisdir}; \
- ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}); \
+ ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
- rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
+ rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
+ ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
done
## Install those items from etc/ that need to end up elsewhere.
+
+## If you prefer, choose "emacs22" at installation time.
+## Note: emacs22 does not have all the resolutions.
+EMACS_ICON=emacs
+
install-etc:
umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
- ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
- $(DESTDIR)${desktopdir}/emacs.desktop
+ tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
+ emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
+ sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
+ -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
+ ${srcdir}/etc/emacs.desktop > $${tmp}; \
+ ${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \
+ rm -f $${tmp}
thisdir=`/bin/pwd`; \
cd ${iconsrcdir} || exit 1; umask 022 ; \
for dir in */*/apps */*/mimetypes; do \
[ -d $${dir} ] || continue ; \
( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
- for icon in $${dir}/*.*; do \
+ for icon in $${dir}/${EMACS_ICON}[.-]*; do \
[ -r $${icon} ] || continue ; \
+ ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
+ dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
( cd $${thisdir}; \
- ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${icon} ) \
+ ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \
|| exit 1; \
done ; \
done
-### Install LEIM files. Although they are machine-independent, we
-### have separate target here instead of including it in
-### `install-arch-indep'. People who extracted LEIM files after they
-### installed Emacs itself can install only LEIM files by this target.
-install-leim: leim/Makefile
- cd leim && $(MAKE) $(MFLAGS) install
-
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
$(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
### create (but not the noninstalled files such as `make all' would create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
-uninstall:
- (cd lib-src; \
+uninstall: uninstall-$(NTDIR)
+ cd lib-src && \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
- bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
+ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
+
-unset CDPATH; \
for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
if [ -d $${dir} ]; then \
done
-rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
thisdir=`/bin/pwd`; \
- (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
- cd $(DESTDIR)${infodir} && \
- for elt in ${INFO_NONMISC} $${info_misc}; do \
- (cd $${thisdir}; \
- $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
- if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
- ext=.gz; else ext=; fi; \
- rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
- done;)
+ (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
+ if cd $(DESTDIR)${infodir}; then \
+ for elt in ${INFO_NONMISC} $${info_misc}; do \
+ (cd $${thisdir}; \
+ $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
+ if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
+ ext=.gz; else ext=; fi; \
+ rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
+ done; \
+ fi)
(if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
ext=.gz; else ext=; fi; \
- cd ${mansrcdir} && for page in *.1; do \
- rm -f $(DESTDIR)${man1dir}/$$page$$ext; done )
- (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS))
- (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
- -rm -f $(DESTDIR)${desktopdir}/emacs.desktop
+ if cd ${mansrcdir}; then \
+ for page in *.1; do \
+ rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
+ fi)
+ (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true)
+ (if cd $(DESTDIR)${icondir}; then \
+ rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
+ hicolor/scalable/apps/${EMACS_NAME}.svg \
+ hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
+ fi)
+ -rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop
for file in snake-scores tetris-scores; do \
file=$(DESTDIR)${gamedir}/$${file}; \
[ -s $${file} ] || rm -f $$file; \
done
+### Windows-specific uninstall target for removing programs produced
+### in nt/, and its Posix do-nothing shadow.
+uninstall-:
+uninstall-nt:
+ cd $(NTDIR) && \
+ $(MAKE) $(MFLAGS) uninstall \
+ prefix=${prefix} exec_prefix=${exec_prefix} \
+ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
+
FRC:
# ==================== Cleaning up and miscellanea ====================
-.PHONY: mostlyclean clean distclean maintainer-clean extraclean
+.PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
### `mostlyclean'
### Like `clean', but may refrain from deleting a few files that people
(cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
+ (cd nt; $(MAKE) $(MFLAGS) mostlyclean)
-(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean)
-(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean)
-(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean)
###
### Delete `.dvi' files here if they are not part of the distribution.
clean: FRC
+ -rm -f etc/emacs.tmpdesktop
(cd src; $(MAKE) $(MFLAGS) clean)
(cd oldXMenu; $(MAKE) $(MFLAGS) clean)
(cd lwlib; $(MAKE) $(MFLAGS) clean)
(cd lib; $(MAKE) $(MFLAGS) clean)
(cd lib-src; $(MAKE) $(MFLAGS) clean)
+ (cd nt; $(MAKE) $(MFLAGS) clean)
-(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
-(cd doc/misc && $(MAKE) $(MFLAGS) clean)
-(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
-(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
(cd leim; $(MAKE) $(MFLAGS) clean)
+ (cd nextstep && $(MAKE) $(MFLAGS) clean)
### `bootclean'
### Delete all files that need to be remade for a clean bootstrap.
(cd lwlib; $(MAKE) $(MFLAGS) distclean)
(cd lib; $(MAKE) $(MFLAGS) distclean)
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
+ (cd nt; $(MAKE) $(MFLAGS) distclean)
(cd doc/emacs && $(MAKE) $(MFLAGS) distclean)
(cd doc/misc && $(MAKE) $(MFLAGS) distclean)
(cd doc/lispref && $(MAKE) $(MFLAGS) distclean)
(cd doc/lispintro && $(MAKE) $(MFLAGS) distclean)
(cd leim; $(MAKE) $(MFLAGS) distclean)
(cd lisp; $(MAKE) $(MFLAGS) distclean)
+ (cd nextstep && $(MAKE) $(MFLAGS) distclean)
${top_distclean}
### `bootstrap-clean'
(cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lib; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd nt; $(MAKE) $(MFLAGS) maintainer-clean)
-(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean)
-(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean)
-(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean)
-(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean)
(cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
+ (cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean)
[ ! -f config.log ] || mv -f config.log config.log~
${top_bootclean}
-## configure; make bootstrap replaces the real config.log from configure
-## with the truncated one from config.status. The former is more useful.
### `maintainer-clean'
### Delete everything from the current directory that can be
# The src subdir knows how to do the right thing
# even when the build directory and source dir are different.
+.PHONY: TAGS tags
TAGS tags: lib lib-src src
cd src; $(MAKE) $(MFLAGS) tags
dist:
cd ${srcdir}; ./make-dist
-.PHONY: info dvi dist check html
+DVIS = lispref-dvi lispintro-dvi emacs-dvi misc-dvi
+HTMLS = lispref-html lispintro-html emacs-html misc-html
+INFOS = lispref-info lispintro-info emacs-info misc-info
+PDFS = lispref-pdf lispintro-pdf emacs-pdf misc-pdf
+PSS = lispref-ps lispintro-ps emacs-ps # no misc-ps
-info-real:
- (cd doc/emacs; $(MAKE) $(MFLAGS) info)
- (cd doc/misc; $(MAKE) $(MFLAGS) info)
- (cd doc/lispref; $(MAKE) $(MFLAGS) info)
- (cd doc/lispintro; $(MAKE) $(MFLAGS) info)
+DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
+$(DOCS):
+ t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
+
+.PHONY: $(DOCS) docs pdf ps
+.PHONY: info dvi dist check html info-real force-info check-info-dir
+
+docs: $(DOCS)
+dvi: $(DVIS)
+html: $(HTMLS)
+info-real: $(INFOS)
+pdf: $(PDFS)
+ps: $(PSS)
force-info:
# Note that man/Makefile knows how to put the info files in $(srcdir),
fi ; \
echo "info/dir is OK"
-dvi:
- (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
- (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
- (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
- (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
-
#### Bootstrapping.
### This first cleans the lisp subdirectory, removing all compiled
.PHONY: bootstrap
-## configure; make bootstrap replaces the real config.log from configure
-## with the truncated one from config.status. The former is more useful.
+# Bootstrapping does the following:
+# * Remove files to start from a bootstrap-clean slate.
+# * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
+# * Rebuild Makefile, to update the build procedure itself.
+# * Do the actual build.
bootstrap: bootstrap-clean FRC
- if [ -x ./config.status ]; then \
- ./config.status; \
- else \
- ./configure $(CONFIGURE_FLAGS); \
- fi
+ cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
+ $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
$(MAKE) $(MFLAGS) info all
.PHONY: check-declare
HCoop / bpt / emacs.git / blobdiff