#include <errno.h>
#include <limits.h> /* For CHAR_BIT. */
#include <setjmp.h>
+#include <stat-time.h>
#include "lisp.h"
#include "intervals.h"
#include "character.h"
SSET (efound, SBYTES (efound) - 1, 'c');
}
- if (result == 0 && s1.st_mtime < s2.st_mtime)
+ if (result == 0
+ && EMACS_TIME_LT (get_stat_mtime (&s1), get_stat_mtime (&s2)))
{
/* Make the progress messages mention that source is newer. */
newer = 1;
if (saved_doc_string_size == 0)
{
- saved_doc_string = (char *) xmalloc (nskip + extra);
+ saved_doc_string = xmalloc (nskip + extra);
saved_doc_string_size = nskip + extra;
}
if (nskip > saved_doc_string_size)
DEFSYM (Qvariable_documentation, "variable-documentation");
- read_buffer = (char *) xmalloc (size);
+ read_buffer = xmalloc (size);
read_buffer_size = size;
}
\f
int turn_off_warning = 0;
/* Compute the default Vload-path, with the following logic:
- If CANNOT_DUMP just use PATH_LOADSEARCH.
+ If CANNOT_DUMP, just use PATH_LOADSEARCH, prepending PATH_SITELOADSEARCH
+ unless --no-site-lisp.
Else if purify-flag (ie dumping) start from PATH_DUMPLOADSEARCH;
otherwise start from PATH_LOADSEARCH.
If !initialized, then just set both Vload_path and dump_path.
If initialized, then if Vload_path != dump_path, do nothing.
- (Presumably the load-path has already been changed by something.)
- Also do nothing if Vinstallation_directory is nil.
- Otherwise:
- Remove site-lisp directories from the front of load-path.
+ (Presumably the load-path has already been changed by something.
+ This can only (?) be from a site-load file during dumping.)
+ If Vinstallation_directory is not nil (ie, running uninstalled):
Add installation-dir/lisp (if exists and not already a member),
at the front, and turn off warnings about missing directories
(because we are presumably running uninstalled).
install-dir/src/Makefile.in does NOT exist (this is a sanity
check), then repeat the above steps for source-dir/lisp,
leim and site-lisp.
- Finally, add the previously removed site-lisp directories back
- at the front (if !no_site_lisp).
+ Finally, add the site-lisp directories at the front (if !no_site_lisp).
We then warn about any of the load-path elements that do not
exist. The only ones that might not exist are those from
uninstalled, the eventual installation directories should not yet
be included in load-path.
*/
+
#ifdef CANNOT_DUMP
normal = PATH_LOADSEARCH;
Vload_path = decode_env_path (0, normal);
+ if (!no_site_lisp)
+ {
+ Lisp_Object sitelisp;
+ sitelisp = decode_env_path (0, PATH_SITELOADSEARCH);
+ if (! NILP (sitelisp)) Vload_path = nconc2 (sitelisp, Vload_path);
+ }
#else
if (NILP (Vpurify_flag))
normal = PATH_LOADSEARCH;
if (! NILP (Fequal (dump_path, Vload_path)))
{
Vload_path = decode_env_path (0, normal);
- if (no_site_lisp || !NILP (Vinstallation_directory))
+ if (!NILP (Vinstallation_directory))
{
- Lisp_Object tem, tem1, sitelisp;
-
- /* Remove "site-lisp" dirs from front of path temporarily
- and store them in sitelisp, then conc them on at the
- end so they're always first in path.
- Note that this won't work if you used a
- --enable-locallisppath element that does not happen
- to contain "site-lisp" in its name.
- */
- sitelisp = Qnil;
- while (1)
- {
- tem = Fcar (Vload_path);
- tem1 = Fstring_match (build_string ("site-lisp"),
- tem, Qnil);
- if (!NILP (tem1))
- {
- Vload_path = Fcdr (Vload_path);
- sitelisp = Fcons (tem, sitelisp);
- }
- else
- break;
- }
-
- if (!NILP (Vinstallation_directory))
- {
- /* Add to the path the lisp subdir of the
- installation dir, if it exists. */
- tem = Fexpand_file_name (build_string ("lisp"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- {
- turn_off_warning = 1;
- Vload_path = Fcons (tem, Vload_path);
- }
- }
- else
- /* That dir doesn't exist, so add the build-time
- Lisp dirs instead. */
- Vload_path = nconc2 (Vload_path, dump_path);
-
- /* Add leim under the installation dir, if it exists. */
- tem = Fexpand_file_name (build_string ("leim"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
-
- /* Add site-lisp under the installation dir, if it exists. */
- if (!no_site_lisp)
- {
- tem = Fexpand_file_name (build_string ("site-lisp"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
- if (!NILP (tem1))
- {
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
- }
-
- /* If Emacs was not built in the source directory,
- and it is run from where it was built, add to load-path
- the lisp, leim and site-lisp dirs under that directory. */
-
- if (NILP (Fequal (Vinstallation_directory, Vsource_directory)))
- {
- Lisp_Object tem2;
-
- tem = Fexpand_file_name (build_string ("src/Makefile"),
- Vinstallation_directory);
- tem1 = Ffile_exists_p (tem);
-
- /* Don't be fooled if they moved the entire source tree
- AFTER dumping Emacs. If the build directory is indeed
- different from the source dir, src/Makefile.in and
- src/Makefile will not be found together. */
- tem = Fexpand_file_name (build_string ("src/Makefile.in"),
- Vinstallation_directory);
- tem2 = Ffile_exists_p (tem);
- if (!NILP (tem1) && NILP (tem2))
- {
- tem = Fexpand_file_name (build_string ("lisp"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
-
- tem = Fexpand_file_name (build_string ("leim"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
-
- if (!no_site_lisp)
- {
- tem = Fexpand_file_name (build_string ("site-lisp"),
- Vsource_directory);
-
- if (NILP (Fmember (tem, Vload_path)))
- Vload_path = Fcons (tem, Vload_path);
- }
- }
- } /* Vinstallation_directory != Vsource_directory */
- } /* if Vinstallation_directory */
- if (!NILP (sitelisp) && !no_site_lisp)
- Vload_path = nconc2 (Fnreverse (sitelisp), Vload_path);
- } /* if Vinstallation_directory || no_site_lisp */
- } /* if dump_path == Vload_path */
+ Lisp_Object tem, tem1;
+
+ /* Add to the path the lisp subdir of the
+ installation dir, if it exists. */
+ tem = Fexpand_file_name (build_string ("lisp"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ {
+ turn_off_warning = 1;
+ Vload_path = Fcons (tem, Vload_path);
+ }
+ }
+ else
+ /* That dir doesn't exist, so add the build-time
+ Lisp dirs instead. */
+ Vload_path = nconc2 (Vload_path, dump_path);
+
+ /* Add leim under the installation dir, if it exists. */
+ tem = Fexpand_file_name (build_string ("leim"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+
+ /* Add site-lisp under the installation dir, if it exists. */
+ if (!no_site_lisp)
+ {
+ tem = Fexpand_file_name (build_string ("site-lisp"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+ if (!NILP (tem1))
+ {
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+ }
+
+ /* If Emacs was not built in the source directory,
+ and it is run from where it was built, add to load-path
+ the lisp, leim and site-lisp dirs under that directory. */
+
+ if (NILP (Fequal (Vinstallation_directory, Vsource_directory)))
+ {
+ Lisp_Object tem2;
+
+ tem = Fexpand_file_name (build_string ("src/Makefile"),
+ Vinstallation_directory);
+ tem1 = Ffile_exists_p (tem);
+
+ /* Don't be fooled if they moved the entire source tree
+ AFTER dumping Emacs. If the build directory is indeed
+ different from the source dir, src/Makefile.in and
+ src/Makefile will not be found together. */
+ tem = Fexpand_file_name (build_string ("src/Makefile.in"),
+ Vinstallation_directory);
+ tem2 = Ffile_exists_p (tem);
+ if (!NILP (tem1) && NILP (tem2))
+ {
+ tem = Fexpand_file_name (build_string ("lisp"),
+ Vsource_directory);
+
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+
+ tem = Fexpand_file_name (build_string ("leim"),
+ Vsource_directory);
+
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+
+ if (!no_site_lisp)
+ {
+ tem = Fexpand_file_name (build_string ("site-lisp"),
+ Vsource_directory);
+
+ if (NILP (Fmember (tem, Vload_path)))
+ Vload_path = Fcons (tem, Vload_path);
+ }
+ }
+ } /* Vinstallation_directory != Vsource_directory */
+
+ } /* if Vinstallation_directory */
+
+ /* Add the site-lisp directories at the front. */
+ /* Note: If the site changed the load-path during dumping,
+ --no-site-lisp is ignored. I don't know what to do about this.
+ */
+ if (!no_site_lisp)
+ {
+ Lisp_Object sitelisp;
+ sitelisp = decode_env_path (0, PATH_SITELOADSEARCH);
+ if (! NILP (sitelisp)) Vload_path = nconc2 (sitelisp, Vload_path);
+ }
+ } /* if dump_path == Vload_path */
}
else /* !initialized */
{
HCoop / bpt / emacs.git / blobdiff