a new file with the same mode as the original */
int auto_save_mode_bits;
+/* Set by auto_save_1 if an error occurred during the last auto-save. */
+int auto_save_error_occurred;
+
/* The symbol bound to coding-system-for-read when
insert-file-contents is called for recovering a file. This is not
an actual coding system name, but just an indicator to tell
(name, default_directory)
Lisp_Object name, default_directory;
{
- unsigned char *nm;
+ /* These point to SDATA and need to be careful with string-relocation
+ during GC (via DECODE_FILE). */
+ unsigned char *nm, *newdir;
+ int nm_in_name;
+ /* This should only point to alloca'd data. */
+ unsigned char *target;
- register unsigned char *newdir, *p, *o;
int tlen;
- unsigned char *target;
struct passwd *pw;
#ifdef VMS
unsigned char * colon = 0;
int length;
Lisp_Object handler, result;
int multibyte;
+ Lisp_Object hdir;
CHECK_STRING (name);
return call3 (handler, Qexpand_file_name, name, default_directory);
}
- o = SDATA (default_directory);
-
- /* Make sure DEFAULT_DIRECTORY is properly expanded.
- It would be better to do this down below where we actually use
- default_directory. Unfortunately, calling Fexpand_file_name recursively
- could invoke GC, and the strings might be relocated. This would
- be annoying because we have pointers into strings lying around
- that would need adjusting, and people would add new pointers to
- the code and forget to adjust them, resulting in intermittent bugs.
- Putting this call here avoids all that crud.
-
- The EQ test avoids infinite recursion. */
- if (! NILP (default_directory) && !EQ (default_directory, name)
- /* Save time in some common cases - as long as default_directory
- is not relative, it can be canonicalized with name below (if it
- is needed at all) without requiring it to be expanded now. */
+ {
+ unsigned char *o = SDATA (default_directory);
+
+ /* Make sure DEFAULT_DIRECTORY is properly expanded.
+ It would be better to do this down below where we actually use
+ default_directory. Unfortunately, calling Fexpand_file_name recursively
+ could invoke GC, and the strings might be relocated. This would
+ be annoying because we have pointers into strings lying around
+ that would need adjusting, and people would add new pointers to
+ the code and forget to adjust them, resulting in intermittent bugs.
+ Putting this call here avoids all that crud.
+
+ The EQ test avoids infinite recursion. */
+ if (! NILP (default_directory) && !EQ (default_directory, name)
+ /* Save time in some common cases - as long as default_directory
+ is not relative, it can be canonicalized with name below (if it
+ is needed at all) without requiring it to be expanded now. */
#ifdef DOS_NT
- /* Detect MSDOS file names with drive specifiers. */
- && ! (IS_DRIVE (o[0]) && IS_DEVICE_SEP (o[1]) && IS_DIRECTORY_SEP (o[2]))
+ /* Detect MSDOS file names with drive specifiers. */
+ && ! (IS_DRIVE (o[0]) && IS_DEVICE_SEP (o[1])
+ && IS_DIRECTORY_SEP (o[2]))
#ifdef WINDOWSNT
- /* Detect Windows file names in UNC format. */
- && ! (IS_DIRECTORY_SEP (o[0]) && IS_DIRECTORY_SEP (o[1]))
+ /* Detect Windows file names in UNC format. */
+ && ! (IS_DIRECTORY_SEP (o[0]) && IS_DIRECTORY_SEP (o[1]))
#endif
#else /* not DOS_NT */
/* Detect Unix absolute file names (/... alone is not absolute on
DOS or Windows). */
- && ! (IS_DIRECTORY_SEP (o[0]))
+ && ! (IS_DIRECTORY_SEP (o[0]))
#endif /* not DOS_NT */
- )
- {
- struct gcpro gcpro1;
-
- GCPRO1 (name);
- default_directory = Fexpand_file_name (default_directory, Qnil);
- UNGCPRO;
- }
+ )
+ {
+ struct gcpro gcpro1;
+ GCPRO1 (name);
+ default_directory = Fexpand_file_name (default_directory, Qnil);
+ UNGCPRO;
+ }
+ }
name = FILE_SYSTEM_CASE (name);
multibyte = STRING_MULTIBYTE (name);
if (multibyte != STRING_MULTIBYTE (default_directory))
}
nm = SDATA (name);
+ nm_in_name = 1;
#ifdef DOS_NT
/* We will force directory separators to be either all \ or /, so make
a local copy to modify, even if there ends up being no change. */
nm = strcpy (alloca (strlen (nm) + 1), nm);
+ nm_in_name = 0;
/* Note if special escape prefix is present, but remove for now. */
if (nm[0] == '/' && nm[1] == ':')
"//somedir". */
if (drive && IS_DIRECTORY_SEP (nm[0]) && IS_DIRECTORY_SEP (nm[1]))
nm++;
-#endif /* WINDOWSNT */
-#endif /* DOS_NT */
-#ifdef WINDOWSNT
/* Discard any previous drive specifier if nm is now in UNC format. */
if (IS_DIRECTORY_SEP (nm[0]) && IS_DIRECTORY_SEP (nm[1]))
{
drive = 0;
}
-#endif
+#endif /* WINDOWSNT */
+#endif /* DOS_NT */
/* If nm is absolute, look for `/./' or `/../' or `//''sequences; if
none are found, we can probably return right away. We will avoid
non-zero value, that means we've discovered that we can't do
that cool trick. */
int lose = 0;
+ unsigned char *p = nm;
- p = nm;
while (*p)
{
/* Since we know the name is absolute, we can assume that each
if (index (nm, '/'))
{
nm = sys_translate_unix (nm);
+ nm_in_name = 0;
return make_specified_string (nm, -1, strlen (nm), multibyte);
}
#endif /* VMS */
#endif /* VMS */
|| nm[1] == 0) /* ~ by itself */
{
+ Lisp_Object tem;
+
if (!(newdir = (unsigned char *) egetenv ("HOME")))
newdir = (unsigned char *) "";
nm++;
+ /* egetenv may return a unibyte string, which will bite us since
+ we expect the directory to be multibyte. */
+ tem = build_string (newdir);
+ if (!STRING_MULTIBYTE (tem))
+ {
+ /* FIXME: DECODE_FILE may GC, which may move SDATA(name),
+ after which `nm' won't point to the right place any more. */
+ int offset = nm - SDATA (name);
+ hdir = DECODE_FILE (tem);
+ newdir = SDATA (hdir);
+ if (nm_in_name)
+ nm = SDATA (name) + offset;
+ }
#ifdef DOS_NT
collapse_newdir = 0;
#endif
}
else /* ~user/filename */
{
+ unsigned char *o, *p;
for (p = nm; *p && (!IS_DIRECTORY_SEP (*p)
#ifdef VMS
&& *p != ':'
#endif /* VMS */
); p++);
- o = (unsigned char *) alloca (p - nm + 1);
+ o = alloca (p - nm + 1);
bcopy ((char *) nm, o, p - nm);
o [p - nm] = 0;
#ifdef WINDOWSNT
if (IS_DIRECTORY_SEP (newdir[0]) && IS_DIRECTORY_SEP (newdir[1]))
{
+ unsigned char *p;
newdir = strcpy (alloca (strlen (newdir) + 1), newdir);
p = newdir + 2;
while (*p && !IS_DIRECTORY_SEP (*p)) p++;
/* Now canonicalize by removing `//', `/.' and `/foo/..' if they
appear. */
- p = target;
- o = target;
+ {
+ unsigned char *p = target;
+ unsigned char *o = target;
- while (*p)
- {
+ while (*p)
+ {
#ifdef VMS
- if (*p != ']' && *p != '>' && *p != '-')
- {
- if (*p == '\\')
- p++;
- *o++ = *p++;
- }
- else if ((p[0] == ']' || p[0] == '>') && p[0] == p[1] + 2)
- /* brackets are offset from each other by 2 */
- {
- p += 2;
- if (*p != '.' && *p != '-' && o[-1] != '.')
- /* convert [foo][bar] to [bar] */
- while (o[-1] != '[' && o[-1] != '<')
- o--;
- else if (*p == '-' && *o != '.')
- *--p = '.';
- }
- else if (p[0] == '-' && o[-1] == '.'
- && (p[1] == '.' || p[1] == ']' || p[1] == '>'))
- /* flush .foo.- ; leave - if stopped by '[' or '<' */
- {
- do
- o--;
- while (o[-1] != '.' && o[-1] != '[' && o[-1] != '<');
- if (p[1] == '.') /* foo.-.bar ==> bar. */
+ if (*p != ']' && *p != '>' && *p != '-')
+ {
+ if (*p == '\\')
+ p++;
+ *o++ = *p++;
+ }
+ else if ((p[0] == ']' || p[0] == '>') && p[0] == p[1] + 2)
+ /* brackets are offset from each other by 2 */
+ {
p += 2;
- else if (o[-1] == '.') /* '.foo.-]' ==> ']' */
- p++, o--;
- /* else [foo.-] ==> [-] */
- }
- else
- {
+ if (*p != '.' && *p != '-' && o[-1] != '.')
+ /* convert [foo][bar] to [bar] */
+ while (o[-1] != '[' && o[-1] != '<')
+ o--;
+ else if (*p == '-' && *o != '.')
+ *--p = '.';
+ }
+ else if (p[0] == '-' && o[-1] == '.'
+ && (p[1] == '.' || p[1] == ']' || p[1] == '>'))
+ /* flush .foo.- ; leave - if stopped by '[' or '<' */
+ {
+ do
+ o--;
+ while (o[-1] != '.' && o[-1] != '[' && o[-1] != '<');
+ if (p[1] == '.') /* foo.-.bar ==> bar. */
+ p += 2;
+ else if (o[-1] == '.') /* '.foo.-]' ==> ']' */
+ p++, o--;
+ /* else [foo.-] ==> [-] */
+ }
+ else
+ {
#ifdef NO_HYPHENS_IN_FILENAMES
- if (*p == '-'
- && o[-1] != '[' && o[-1] != '<' && o[-1] != '.'
- && p[1] != ']' && p[1] != '>' && p[1] != '.')
- *p = '_';
+ if (*p == '-'
+ && o[-1] != '[' && o[-1] != '<' && o[-1] != '.'
+ && p[1] != ']' && p[1] != '>' && p[1] != '.')
+ *p = '_';
#endif /* NO_HYPHENS_IN_FILENAMES */
- *o++ = *p++;
- }
+ *o++ = *p++;
+ }
#else /* not VMS */
- if (!IS_DIRECTORY_SEP (*p))
- {
- *o++ = *p++;
- }
- else if (p[1] == '.'
- && (IS_DIRECTORY_SEP (p[2])
- || p[2] == 0))
- {
- /* If "/." is the entire filename, keep the "/". Otherwise,
- just delete the whole "/.". */
- if (o == target && p[2] == '\0')
- *o++ = *p;
- p += 2;
- }
- else if (p[1] == '.' && p[2] == '.'
- /* `/../' is the "superroot" on certain file systems.
- Turned off on DOS_NT systems because they have no
- "superroot" and because this causes us to produce
- file names like "d:/../foo" which fail file-related
- functions of the underlying OS. (To reproduce, try a
- long series of "../../" in default_directory, longer
- than the number of levels from the root.) */
+ if (!IS_DIRECTORY_SEP (*p))
+ {
+ *o++ = *p++;
+ }
+ else if (p[1] == '.'
+ && (IS_DIRECTORY_SEP (p[2])
+ || p[2] == 0))
+ {
+ /* If "/." is the entire filename, keep the "/". Otherwise,
+ just delete the whole "/.". */
+ if (o == target && p[2] == '\0')
+ *o++ = *p;
+ p += 2;
+ }
+ else if (p[1] == '.' && p[2] == '.'
+ /* `/../' is the "superroot" on certain file systems.
+ Turned off on DOS_NT systems because they have no
+ "superroot" and because this causes us to produce
+ file names like "d:/../foo" which fail file-related
+ functions of the underlying OS. (To reproduce, try a
+ long series of "../../" in default_directory, longer
+ than the number of levels from the root.) */
#ifndef DOS_NT
- && o != target
+ && o != target
#endif
- && (IS_DIRECTORY_SEP (p[3]) || p[3] == 0))
- {
- while (o != target && (--o) && !IS_DIRECTORY_SEP (*o))
- ;
- /* Keep initial / only if this is the whole name. */
- if (o == target && IS_ANY_SEP (*o) && p[3] == 0)
- ++o;
- p += 3;
- }
- else if (p > target && IS_DIRECTORY_SEP (p[1]))
- /* Collapse multiple `/' in a row. */
- p++;
- else
- {
- *o++ = *p++;
- }
+ && (IS_DIRECTORY_SEP (p[3]) || p[3] == 0))
+ {
+ while (o != target && (--o) && !IS_DIRECTORY_SEP (*o))
+ ;
+ /* Keep initial / only if this is the whole name. */
+ if (o == target && IS_ANY_SEP (*o) && p[3] == 0)
+ ++o;
+ p += 3;
+ }
+ else if (p > target && IS_DIRECTORY_SEP (p[1]))
+ /* Collapse multiple `/' in a row. */
+ p++;
+ else
+ {
+ *o++ = *p++;
+ }
#endif /* not VMS */
- }
+ }
#ifdef DOS_NT
- /* At last, set drive name. */
+ /* At last, set drive name. */
#ifdef WINDOWSNT
- /* Except for network file name. */
- if (!(IS_DIRECTORY_SEP (target[0]) && IS_DIRECTORY_SEP (target[1])))
+ /* Except for network file name. */
+ if (!(IS_DIRECTORY_SEP (target[0]) && IS_DIRECTORY_SEP (target[1])))
#endif /* WINDOWSNT */
- {
- if (!drive) abort ();
- target -= 2;
- target[0] = DRIVE_LETTER (drive);
- target[1] = ':';
- }
- /* Reinsert the escape prefix if required. */
- if (is_escaped)
- {
- target -= 2;
- target[0] = '/';
- target[1] = ':';
- }
- CORRECT_DIR_SEPS (target);
+ {
+ if (!drive) abort ();
+ target -= 2;
+ target[0] = DRIVE_LETTER (drive);
+ target[1] = ':';
+ }
+ /* Reinsert the escape prefix if required. */
+ if (is_escaped)
+ {
+ target -= 2;
+ target[0] = '/';
+ target[1] = ':';
+ }
+ CORRECT_DIR_SEPS (target);
#endif /* DOS_NT */
- result = make_specified_string (target, -1, o - target, multibyte);
+ result = make_specified_string (target, -1, o - target, multibyte);
+ }
/* Again look to see if the file name has special constructs in it
and perhaps call the corresponding file handler. This is needed
/* Get variable value */
o = (unsigned char *) egetenv (target);
if (o)
- {
- total += strlen (o);
+ { /* Eight-bit chars occupy upto 2 bytes in multibyte. */
+ total += strlen (o) * (STRING_MULTIBYTE (filename) ? 2 : 1);
substituted = 1;
}
else if (*p == '}')
return Qnil;
}
-#ifdef S_IFLNK
DEFUN ("make-symbolic-link", Fmake_symbolic_link, Smake_symbolic_link, 2, 3,
"FMake symbolic link to file: \nGMake symbolic link to file %s: \np",
doc: /* Make a symbolic link to FILENAME, named LINKNAME.
RETURN_UNGCPRO (call4 (handler, Qmake_symbolic_link, filename,
linkname, ok_if_already_exists));
+#ifdef S_IFLNK
encoded_filename = ENCODE_FILE (filename);
encoded_linkname = ENCODE_FILE (linkname);
}
UNGCPRO;
return Qnil;
-}
+
+#else
+ UNGCPRO;
+ xsignal1 (Qfile_error, build_string ("Symbolic links are not supported"));
+
#endif /* S_IFLNK */
+}
#ifdef VMS
struct stat st;
register int fd;
int inserted = 0;
+ int nochange = 0;
register int how_much;
register int unprocessed;
int count = SPECPDL_INDEX ();
how_much += this;
- BUF_SET_PT (XBUFFER (conversion_buffer),
- BUF_Z (XBUFFER (conversion_buffer)));
+ BUF_TEMP_SET_PT (XBUFFER (conversion_buffer),
+ BUF_Z (XBUFFER (conversion_buffer)));
decode_coding_c_string (&coding, read_buf, unprocessed + this,
conversion_buffer);
unprocessed = coding.carryover_bytes;
{
specpdl_ptr--;
/* Truncate the buffer to the size of the file. */
- del_range_byte (same_at_start, same_at_end, 0);
+ if (same_at_start == same_at_end)
+ nochange = 1;
+ else
+ del_range_byte (same_at_start, same_at_end, 0);
inserted = 0;
unbind_to (this_count, Qnil);
if (!NILP (visit))
{
- if (!EQ (current_buffer->undo_list, Qt))
+ if (!EQ (current_buffer->undo_list, Qt) && !nochange)
current_buffer->undo_list = Qnil;
if (NILP (handler))
char *msgbuf;
USE_SAFE_ALLOCA;
+ auto_save_error_occurred = 1;
+
ring_bell (XFRAME (selected_frame));
args[0] = build_string ("Auto-saving %s: %s");
make_number (minibuffer_auto_raise));
minibuffer_auto_raise = 0;
auto_saving = 1;
+ auto_save_error_occurred = 0;
/* On first pass, save all files that don't have handlers.
On second pass, save all files that do have handlers.
sit_for (make_number (1), 0, 0);
restore_message ();
}
- else
- /* If we displayed a message and then restored a state
+ else if (!auto_save_error_occurred)
+ /* Don't overwrite the error message if an error occurred.
+ If we displayed a message and then restored a state
with no message, leave a "done" message on the screen. */
message1 ("Auto-saving...done");
}
return val;
}
-static Lisp_Object
-read_file_name_cleanup (arg)
- Lisp_Object arg;
-{
- return (current_buffer->directory = arg);
-}
-
-DEFUN ("read-file-name-internal", Fread_file_name_internal, Sread_file_name_internal,
- 3, 3, 0,
- doc: /* Internal subroutine for read-file-name. Do not call this. */)
- (string, dir, action)
- Lisp_Object string, dir, action;
- /* action is nil for complete, t for return list of completions,
- lambda for verify final value */
-{
- Lisp_Object name, specdir, realdir, val, orig_string;
- int changed;
- struct gcpro gcpro1, gcpro2, gcpro3, gcpro4, gcpro5;
-
- CHECK_STRING (string);
-
- realdir = dir;
- name = string;
- orig_string = Qnil;
- specdir = Qnil;
- changed = 0;
- /* No need to protect ACTION--we only compare it with t and nil. */
- GCPRO5 (string, realdir, name, specdir, orig_string);
-
- if (SCHARS (string) == 0)
- {
- if (EQ (action, Qlambda))
- {
- UNGCPRO;
- return Qnil;
- }
- }
- else
- {
- orig_string = string;
- string = Fsubstitute_in_file_name (string);
- changed = NILP (Fstring_equal (string, orig_string));
- name = Ffile_name_nondirectory (string);
- val = Ffile_name_directory (string);
- if (! NILP (val))
- realdir = Fexpand_file_name (val, realdir);
- }
-
- if (NILP (action))
- {
- specdir = Ffile_name_directory (string);
- val = Ffile_name_completion (name, realdir, Vread_file_name_predicate);
- UNGCPRO;
- if (!STRINGP (val))
- {
- if (changed)
- return double_dollars (string);
- return val;
- }
-
- if (!NILP (specdir))
- val = concat2 (specdir, val);
-#ifndef VMS
- return double_dollars (val);
-#else /* not VMS */
- return val;
-#endif /* not VMS */
- }
- UNGCPRO;
-
- if (EQ (action, Qt))
- {
- Lisp_Object all = Ffile_name_all_completions (name, realdir);
- Lisp_Object comp;
- int count;
-
- if (NILP (Vread_file_name_predicate)
- || EQ (Vread_file_name_predicate, Qfile_exists_p))
- return all;
-
-#ifndef VMS
- if (EQ (Vread_file_name_predicate, Qfile_directory_p))
- {
- /* Brute-force speed up for directory checking:
- Discard strings which don't end in a slash. */
- for (comp = Qnil; CONSP (all); all = XCDR (all))
- {
- Lisp_Object tem = XCAR (all);
- int len;
- if (STRINGP (tem) &&
- (len = SBYTES (tem), len > 0) &&
- IS_DIRECTORY_SEP (SREF (tem, len-1)))
- comp = Fcons (tem, comp);
- }
- }
- else
-#endif
- {
- /* Must do it the hard (and slow) way. */
- Lisp_Object tem;
- GCPRO3 (all, comp, specdir);
- count = SPECPDL_INDEX ();
- record_unwind_protect (read_file_name_cleanup, current_buffer->directory);
- current_buffer->directory = realdir;
- for (comp = Qnil; CONSP (all); all = XCDR (all))
- {
- tem = call1 (Vread_file_name_predicate, XCAR (all));
- if (!NILP (tem))
- comp = Fcons (XCAR (all), comp);
- }
- unbind_to (count, Qnil);
- UNGCPRO;
- }
- return Fnreverse (comp);
- }
-
- /* Only other case actually used is ACTION = lambda */
-#ifdef VMS
- /* Supposedly this helps commands such as `cd' that read directory names,
- but can someone explain how it helps them? -- RMS */
- if (SCHARS (name) == 0)
- return Qt;
-#endif /* VMS */
- string = Fexpand_file_name (string, dir);
- if (!NILP (Vread_file_name_predicate))
- return call1 (Vread_file_name_predicate, string);
- return Ffile_exists_p (string);
-}
-
DEFUN ("next-read-file-uses-dialog-p", Fnext_read_file_uses_dialog_p,
Snext_read_file_uses_dialog_p, 0, 0, 0,
doc: /* Return t if a call to `read-file-name' will use a dialog.
return Qnil;
}
+Lisp_Object Qdefault_directory;
+
DEFUN ("read-file-name", Fread_file_name, Sread_file_name, 1, 6, 0,
doc: /* Read file name, prompting with PROMPT and completing in directory DIR.
Value is not expanded---you must call `expand-file-name' yourself.
}
count = SPECPDL_INDEX ();
+ specbind (Qdefault_directory,
+ Ffile_name_as_directory (Fexpand_file_name (dir, Qnil)));
specbind (Qcompletion_ignore_case,
read_file_name_completion_ignore_case ? Qt : Qnil);
specbind (intern ("minibuffer-completing-file-name"), Qt);
else
#endif
val = Fcompleting_read (prompt, intern ("read-file-name-internal"),
- dir, mustmatch, insdef,
+ Qnil, mustmatch, insdef,
Qfile_name_history, default_filename, Qnil);
tem = Fsymbol_value (Qfile_name_history);
Qformat_decode = intern ("format-decode");
staticpro (&Qformat_decode);
+ Qdefault_directory = intern ("default-directory");
+ staticpro (&Qdefault_directory);
Qformat_annotate_function = intern ("format-annotate-function");
staticpro (&Qformat_annotate_function);
Qafter_insert_file_set_coding = intern ("after-insert-file-set-coding");
DEFVAR_BOOL ("insert-default-directory", &insert_default_directory,
doc: /* *Non-nil means when reading a filename start with default dir in minibuffer.
-If the initial minibuffer contents are non-empty, you can usually
-request a default filename by typing RETURN without editing. For some
-commands, exiting with an empty minibuffer has a special meaning,
-such as making the current buffer visit no file in the case of
-`set-visited-file-name'.
+
+When the initial minibuffer contents show a name of a file or a directory,
+typing RETURN without editing the initial contents is equivalent to typing
+the default file name.
+
If this variable is non-nil, the minibuffer contents are always
-initially non-empty and typing RETURN without editing will fetch the
+initially non-empty, and typing RETURN without editing will fetch the
default name, if one is provided. Note however that this default name
-is not necessarily the name originally inserted in the minibuffer, if
-that is just the default directory.
+is not necessarily the same as initial contents inserted in the minibuffer,
+if the initial contents is just the default directory.
+
If this variable is nil, the minibuffer often starts out empty. In
that case you may have to explicitly fetch the next history element to
-request the default name. */);
+request the default name; typing RETURN without editing will leave
+the minibuffer empty.
+
+For some commands, exiting with an empty minibuffer has a special meaning,
+such as making the current buffer visit no file in the case of
+`set-visited-file-name'. */);
insert_default_directory = 1;
DEFVAR_BOOL ("vms-stmlf-recfm", &vms_stmlf_recfm,
defsubr (&Sdelete_file);
defsubr (&Srename_file);
defsubr (&Sadd_name_to_file);
-#ifdef S_IFLNK
defsubr (&Smake_symbolic_link);
-#endif /* S_IFLNK */
#ifdef VMS
defsubr (&Sdefine_logical_name);
#endif /* VMS */
defsubr (&Sclear_buffer_auto_save_failure);
defsubr (&Srecent_auto_save_p);
- defsubr (&Sread_file_name_internal);
defsubr (&Sread_file_name);
defsubr (&Snext_read_file_uses_dialog_p);
HCoop / bpt / emacs.git / blobdiff