# DIST: make most of the changes to this file you might want, so try
# DIST: that first.
-# Copyright (C) 1992-2012 Free Software Foundation, Inc.
+# Copyright (C) 1992-2012 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
# ==================== Where To Install Things ====================
+# Location to install Emacs.app under GNUstep / Mac OS X.
+# Later values may use these.
+ns_appbindir=@ns_appbindir@
+ns_appresdir=@ns_appresdir@
+# Either yes or no depending on whether this is a relocatable Emacs.app.
+ns_self_contained=@ns_self_contained@
+
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
-# rather than directly by users, and other architecture-dependent
-# data. ${archlibdir} is a subdirectory of this.
+# rather than directly by users (and other architecture-dependent
+# data, although Emacs does not have any). The executables
+# are actually installed in ${archlibdir}, which is (normally)
+# a subdirectory of this.
libexecdir=@libexecdir@
# Where to install Emacs's man pages.
-# This used to allow choice of the numeric extension, but this made
-# little sense since the files were always installed in man1/
-# (and they contain cross-references that expect them to be there).
+# Note they contain cross-references that expect them to be in section 1.
mandir=@mandir@
man1dir=$(mandir)/man1
-MAN_PAGES=ctags.1 ebrowse.1 emacs.1 emacsclient.1 etags.1 \
- grep-changelog.1 rcs-checkin.1
-# Where to install and expect the info files describing Emacs. In the
-# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
-# since there are now many packages documented with the texinfo
-# system, it is inappropriate to imply that it is part of Emacs.
+# Where to install and expect the info files describing Emacs.
infodir=@infodir@
-INFO_FILES=ada-mode auth autotype calc ccmode cl dbus dired-x ebrowse \
- ede ediff edt eieio efaq eintr elisp emacs emacs-mime epa erc \
- ert eshell eudc flymake forms gnus idlwave info mairix-el \
- message mh-e newsticker nxml-mode org pcl-cvs pgg rcirc \
- reftex remember sasl sc semantic ses sieve smtpmail speedbar \
- tramp url vip viper widget woman
+# Info files not in the doc/misc directory (we get those via make echo-info).
+INFO_EXT=@INFO_EXT@
+INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
# If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
HAVE_MAKEINFO=@HAVE_MAKEINFO@
# Where to find the application default.
x_default_search_path=@x_default_search_path@
-# Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
-ns_appbindir=@ns_appbindir@
-ns_appresdir=@ns_appresdir@
-
# Where the etc/emacs.desktop file is to be installed.
desktopdir=$(datarootdir)/applications
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
+# Note that if the system does not provide a suitable install,
+# configure will use build-aux/install-sh. Annoyingly, it does
+# not use an absolute path. So we must take care to always run
+# INSTALL-type commands from the directory containing the Makefile.
+# This explains (I think) the cd thisdir seen in several install rules.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_INFO = @INSTALL_INFO@
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =
+MKDIR_P = @MKDIR_P@
# We use gzip to compress installed .el files.
GZIP_PROG = @GZIP_PROG@
# running more than 1 process in the leim directory, especially for
# the $TIT files there.
leim: src Makefile FRC
- (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
- CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
- LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
+ cd leim && PARALLEL=0 $(MAKE) all $(MFLAGS)
lib-src src: lib
careadlinkat crypto/md5 crypto/sha1 crypto/sha256 crypto/sha512 dtoastr \
dup2 \
filemode getloadavg getopt-gnu ignore-value intprops lstat \
- mktime pthread_sigmask readlink \
- socklen stdarg stdio strftime strtoimax strtoumax symlink sys_stat
+ manywarnings mktime pthread_sigmask readlink \
+ socklen stdarg stdio strftime strtoimax strtoumax symlink sys_stat \
+ warnings
GNULIB_TOOL_FLAGS = \
- --avoid=msvc-inval --avoid=msvc-nothrow --avoid=pathmax \
+ --avoid=msvc-inval --avoid=msvc-nothrow \
--avoid=raise --avoid=threadlib \
--conditional-dependencies --import --no-changelog --no-vc-files \
--makefile-name=gnulib.mk
.PHONY: install mkdir
-## We delete each directory in ${COPYDESTS} before we copy into it;
-## that way, we can reinstall over directories that have been put in
-## place with their files read-only (perhaps because they are checked
-## into RCS). In order to make this safe, we make sure that the
-## source exists and is distinct from the destination.
### We do install-arch-indep first because
### the executable needs the Lisp files and DOC file to work properly.
install: all install-arch-indep install-arch-dep install-leim blessmail
@true
-MV_DIRS = for i in $$dir; do rm -fr `basename "$$i"` ; mv "$$i" . ; done
+## Ensure that $subdir contains a subdirs.el file.
+## Here and elsewhere, we set the umask so that any created files are
+## world-readable.
+## TODO it might be good to warn about non-standard permissions of
+## pre-existing directories, but that does not seem easy.
+write_subdir=if [ -f $${subdir}/subdirs.el ]; \
+ then true; \
+ else \
+ umask 022; \
+ ${MKDIR_P} $${subdir}; \
+ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
+ echo " (normal-top-level-add-subdirs-to-load-path))") \
+ > $${subdir}/subdirs.el; \
+ fi
### Install the executables that were compiled specifically for this machine.
### It would be nice to do something for a parallel make
### to ensure that install-arch-indep finishes before this starts.
-install-arch-dep: mkdir
+### (TODO Why would it be nice? Why not just make this depend on
+### install-arch-indep then?)
+install-arch-dep:
+ umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
libexecdir=${libexecdir} archlibdir=${archlibdir} \
INSTALL_STRIP=${INSTALL_STRIP})
- ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
- -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
- rm -f $(DESTDIR)${bindir}/$(EMACS)
- -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
- if test "${ns_appresdir}" != ""; then \
- ( cd ${ns_appresdir} ; \
- if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\
- if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \
- rm -fr share ) ; \
- ( cd ${ns_appbindir} ; \
- if cd libexec ; then dir=emacs/*/*/* ; $(MV_DIRS); \
- rm -fr emacs; if cd ../bin; then rm -f emacs emacs-24*; \
- ln -sf ../libexec/* . ; fi ; fi ) ; \
- else true ; fi
-
-## FIXME is the emacs-24* bit above really necessary and correct?
-## What if I have 24.1 and 24.2 installed at the same time?
-## In any case, it should use something like echo $version | sed 's/\..*//'
-## instead of hard-coding a version.
+ if test "${ns_self_contained}" = "no"; then \
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
+ chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \
+ rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
+ ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS) || true ; \
+ else \
+ subdir=${ns_appresdir}/site-lisp; \
+ ${write_subdir} || exit 1; \
+ rm -rf ${ns_appresdir}/share; \
+ fi
+
+## In the share directory, we are deleting:
+## applications (with emacs.desktop)
+## emacs (basically empty)
+## icons (duplicates etc/images/icons/hicolor)
+## man (maybe we should be installing this one, like info)
## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
## Needs to be the user running install, so configure can't set it.
## Note that we copy DOC* and then delete DOC
## as a workaround for a bug in tar on Ultrix 4.2.
+## Ultrix is no longer supported since 23.1, but the relevant line
+## has another effect. We copy the entire etc/ directory from the
+## source tree first. For an in-tree build, this will include
+## any DOC* files there may be. So rm DOC does have an effect.
+## FIXME When we copy etc we should exclude DOC*, then copy only
+## the relevant one. We cannot delete DOC* from the destination directory,
+## because that may include pre-existing files from another emacs.
## We install only the relevant DOC file if possible
## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
+## (Note "otherwise" is inaccurate since 2009-08-23.)
## If people complain about the h flag in tar command, take that out.
## That flag is also used in leim/Makefile.in
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
+## We delete each directory in ${COPYDESTS} before we copy into it;
+## that way, we can reinstall over directories that have been put in
+## place with their files read-only (perhaps because they are checked
+## into RCS). In order to make this safe, we make sure that the
+## source exists and is distinct from the destination.
install-arch-indep: mkdir info install-etc
-set ${COPYDESTS} ; \
unset CDPATH; \
- for dir in ${COPYDIR} ; do \
- if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
- rm -rf $$1 ; \
- fi ; \
- shift ; \
- done
- -set ${COPYDESTS} ; \
- mkdir ${COPYDESTS} ; \
- chmod ugo+rx ${COPYDESTS} ; \
- unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
+ [ -d $${dir} ] || exit 1 ; \
dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
- && (echo "Copying $${dir} to $${dest}..." ; \
- (cd $${dir}; tar -chf - . ) \
- | (cd $${dest}; umask 022; \
- tar -xvf - && cat > /dev/null) || exit 1; \
- find $${dest} -exec chown $${installuser} {} ';' ;\
- for subdir in `find $${dest} -type d -print` ; do \
- chmod a+rx $${subdir} ; \
- rm -f $${subdir}/.gitignore ; \
- rm -f $${subdir}/.arch-inventory ; \
- rm -f $${subdir}/.DS_Store ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/.\#* ; \
- rm -f $${subdir}/*~ ; \
- rm -f $${subdir}/*.orig ; \
- [ "$${dir}" != "${srcdir}/etc" ] && \
- rm -f $${subdir}/[mM]akefile*.c $${subdir}/[mM]akefile*[.-]in \
- $${subdir}/[mM]akefile ; \
- rm -f $${subdir}/ChangeLog* ; \
- done) ; \
+ [ `(cd $${dest} && /bin/pwd)` = `(cd $${dir} && /bin/pwd)` ] && \
+ continue ; \
+ rm -rf $${dest} ; \
+ umask 022; ${MKDIR_P} $${dest} ; \
+ (echo "Copying $${dir} to $${dest}..." ; \
+ (cd $${dir}; tar -chf - . ) \
+ | (cd $${dest}; umask 022; \
+ tar -xvf - && cat > /dev/null) || exit 1; \
+ find $${dest} -exec chown $${installuser} {} ';' ;\
+ for subdir in `find $${dest} -type d -print` ; do \
+ chmod a+rx $${subdir} ; \
+ rm -f $${subdir}/.gitignore ; \
+ rm -f $${subdir}/.arch-inventory ; \
+ rm -f $${subdir}/.DS_Store ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ [ "$${dir}" != "${srcdir}/etc" ] && \
+ rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ done) ; \
done
-rm -f $(DESTDIR)${lispdir}/subdirs.el
$(srcdir)/update-subdirs $(DESTDIR)${lispdir}
- if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
- then true; \
- else \
- (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
- echo " (normal-top-level-add-subdirs-to-load-path))") \
- > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
- fi
- chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
- -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
- then true; \
- else \
- (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
- echo " (normal-top-level-add-subdirs-to-load-path))") \
- > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
- fi
- -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
+ subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
+ ${write_subdir}
+ subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
+ ${write_subdir} || true
-unset CDPATH; \
if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
then \
docfile="DOC"; \
fi; \
echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
- (cd ./etc; tar -chf - $${docfile}) \
- |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
+ umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
+ ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
(cd $(DESTDIR)$(docdir); \
$(set_installuser); \
- chown $${installuser} DOC*; chmod a+r DOC*; \
+ chown $${installuser} DOC*; \
if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
else true; fi
-unset CDPATH; \
- if [ -r ./lisp ] \
- && [ -r ./lisp/simple.el ] \
- && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
- && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
- then \
- echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
- (cd lisp; tar -chf - *.el *.elc) \
- |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
- (cd $(DESTDIR)${lispdir}; \
- $(set_installuser); \
- find . -exec chown $${installuser} {} ';') ; \
- else true; fi
- -unset CDPATH; \
if [ -n "${GZIP_PROG}" ]; \
then \
echo "Compressing *.el ..." ; \
${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
done) \
else true; fi
+ umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
-unset CDPATH; \
thisdir=`/bin/pwd`; \
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
chmod a+r $(DESTDIR)${infodir}/dir); \
fi; \
+ info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
cd ${srcdir}/info ; \
- for elt in $(INFO_FILES); do \
+ for elt in ${INFO_NONMISC} $${info_misc}; do \
test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
- ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
+ (cd $${thisdir}; \
+ ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
chmod a+r $(DESTDIR)${infodir}/$$f; \
if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
rm -f $(DESTDIR)${infodir}/$$f.gz; \
${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
else true; fi; \
done; \
+ (cd $${thisdir}; \
+ ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
done); \
else true; fi
- -unset CDPATH; \
- thisdir=`/bin/pwd`; \
- if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
- then \
- for elt in $(INFO_FILES); do \
- test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
- (cd $${thisdir}; \
- ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
- done; \
- else true; fi
-chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
+ umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
- for page in ${MAN_PAGES}; do \
+ for page in *.1; do \
(cd $${thisdir}; \
${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
chmod a+r $(DESTDIR)${man1dir}/$${page}; \
done
## Install those items from etc/ that need to end up elsewhere.
-install-etc: mkdir
+install-etc:
+ umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
$(DESTDIR)${desktopdir}/emacs.desktop
- for icon in $(iconsrcdir)/*/*/apps/*.* \
- $(iconsrcdir)/*/*/mimetypes/*.*; do \
- if [ -r $${icon} ]; then \
- iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
- ${INSTALL_DATA} $${icon} $${iicon} ; \
- fi ; \
+ thisdir=`/bin/pwd`; \
+ cd ${iconsrcdir} || exit 1; umask 022 ; \
+ for dir in */*/apps */*/mimetypes; do \
+ [ -d $${dir} ] || continue ; \
+ ( cd $${thisdir}; ${MKDIR_P} ${icondir}/$${dir} ) ; \
+ for icon in $${dir}/*.*; do \
+ [ -r $${icon} ] || continue ; \
+ ( cd $${thisdir}; \
+ ${INSTALL_DATA} ${iconsrcdir}/$${icon} ${icondir}/$${icon} ) \
+ || exit 1; \
+ done ; \
done
### Install LEIM files. Although they are machine-independent, we
### have separate target here instead of including it in
### `install-arch-indep'. People who extracted LEIM files after they
### installed Emacs itself can install only LEIM files by this target.
-install-leim: leim/Makefile mkdir
- cd leim; $(MAKE) install
+install-leim: leim/Makefile
+ cd leim && $(MAKE) $(MFLAGS) install
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
- $(MAKE) INSTALL_STRIP=-s install
-
-### Build all the directories we're going to install Emacs in. Since
-### we may be creating several layers of directories (for example,
-### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use install-sh -d
-### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
-### We set the umask so that any created directories are world-readable.
-### FIXME it would be good to warn about non-standard permissions of
-### pre-existing directories, but that does not seem easy.
+ $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
+
+## Note sure this serves any useful purpose.
+## If locallisppath has the default value, then the write_subdir commands
+## in install-arch-indep will create all these components.
+## This will only do something if locallisppath has a non-standard value.
+## Is it really Emacs job to create those directories?
+## Should we also be ensuring they contain subdirs.el files?
+## It would be easy to do.
mkdir: FRC
- icondirs= ; \
- for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
- if [ -d $${dir} ]; then \
- icondirs="$${icondirs} $${dir}" ; \
- fi ; \
- done ; \
- icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
umask 022 ; \
- $(srcdir)/build-aux/install-sh -d $(DESTDIR)${datadir} ${COPYDESTS} \
- $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
- $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
- $(DESTDIR)${datadir}/emacs/site-lisp \
- $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
- $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
- $(DESTDIR)${desktopdir} $${icondirs}
+ $(MKDIR_P) $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'`
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would create).
fi ; \
done
-rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
- (cd $(DESTDIR)${infodir} && \
- for elt in $(INFO_FILES); do \
- $(INSTALL_INFO) --remove --info-dir=. $$elt; \
- for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
- rm -f $$f; \
- done; \
+ thisdir=`/bin/pwd`; \
+ (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
+ cd $(DESTDIR)${infodir} && \
+ for elt in ${INFO_NONMISC} $${info_misc}; do \
+ (cd $${thisdir}; \
+ $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
+ if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
+ ext=.gz; else ext=; fi; \
+ rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
done;)
- (cd $(DESTDIR)${man1dir} && rm -f $(MAN_PAGES))
+ (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
+ ext=.gz; else ext=; fi; \
+ cd ${mansrcdir} && for page in *.1; do \
+ rm -f $(DESTDIR)${man1dir}/$$page$$ext; done )
(cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS))
(cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )
-rm -f $(DESTDIR)${desktopdir}/emacs.desktop
case $${file} in \
*-[0-9]*|COPYING|dir) continue ;; \
esac ; \
+ file=`echo $${file} | sed 's/\.info//'` ; \
grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
done ; \
if test -n "$${missing}"; then \