@c -*-texinfo-*-
@c This is part of the GNU Emacs Lisp Reference Manual.
-@c Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+@c Copyright (C) 1990, 1991, 1992, 1993, 1995, 1998, 1999
+@c Free Software Foundation, Inc.
@c See the file elisp.texi for copying conditions.
@setfilename ../info/tips
-@node Tips, GNU Emacs Internals, Calendar, Top
-@appendix Tips and Standards
+@node Tips, GNU Emacs Internals, GPL, Top
+@appendix Tips and Conventions
@cindex tips
@cindex standards of coding style
@cindex coding standards
- This chapter describes no additional features of Emacs Lisp.
-Instead it gives advice on making effective use of the features described
-in the previous chapters.
+ This chapter describes no additional features of Emacs Lisp. Instead
+it gives advice on making effective use of the features described in the
+previous chapters, and describes conventions Emacs Lisp programmers
+should follow.
+
+ You can automatically check some of the conventions described below by
+running the command @kbd{M-x checkdoc RET} when visiting a Lisp file.
+It cannot check all of the conventions, and not all the warnings it
+gives necessarily correspond to problems, but it is worth examining them
+all.
@menu
-* Style Tips:: Writing clean and robust programs.
+* Coding Conventions:: Conventions for clean and robust programs.
* Compilation Tips:: Making compiled code run fast.
* Documentation Tips:: Writing readable documentation strings.
* Comment Tips:: Conventions for writing comments.
* Library Headers:: Standard headers for library packages.
@end menu
-@node Style Tips
-@section Writing Clean Lisp Programs
+@node Coding Conventions
+@section Emacs Lisp Coding Conventions
- Here are some tips for avoiding common errors in writing Lisp code
-intended for widespread use:
+ Here are conventions that you should follow when writing Emacs Lisp
+code intended for widespread use:
@itemize @bullet
@item
-Since all global variables share the same name space, and all functions
-share another name space, you should choose a short word to distinguish
-your program from other Lisp programs. Then take care to begin the
-names of all global variables, constants, and functions with the chosen
+Since all global variables share the same name space, and all
+functions share another name space, you should choose a short word to
+distinguish your program from other Lisp programs.@footnote{The
+benefits of a Common Lisp-style package system are considered not to
+outweigh the costs.} Then take care to begin the names of all global
+variables, constants, and functions in your program with the chosen
prefix. This helps avoid name conflicts.
This recommendation applies even to names for traditional Lisp
-primitives that are not primitives in Emacs Lisp---even to @code{cadr}.
-Believe it or not, there is more than one plausible way to define
-@code{cadr}. Play it safe; append your name prefix to produce a name
-like @code{foo-cadr} or @code{mylib-cadr} instead.
+primitives that are not primitives in Emacs Lisp---even to
+@code{copy-list}. Believe it or not, there is more than one plausible
+way to define @code{copy-list}. Play it safe; append your name prefix
+to produce a name like @code{foo-copy-list} or @code{mylib-copy-list}
+instead.
If you write a function that you think ought to be added to Emacs under
a certain name, such as @code{twiddle-files}, don't call it by that name
in your program. Call it @code{mylib-twiddle-files} in your program,
-and send mail to @samp{bug-gnu-emacs@@prep.ai.mit.edu} suggesting we add
+and send mail to @samp{bug-gnu-emacs@@gnu.org} suggesting we add
it to Emacs. If and when we do, we can change the name easily enough.
If one prefix is insufficient, your package may use two or three
@end example
@noindent
-(And @var{bar} should contain @code{(provide '@var{bar})}, to make the
-@code{require} work.) This will cause @var{bar} to be loaded when you
-byte-compile @var{foo}. Otherwise, you risk compiling @var{foo} without
-the necessary macro loaded, and that would produce compiled code that
-won't work right. @xref{Compiling Macros}.
+(And the library @var{bar} should contain @code{(provide '@var{bar})},
+to make the @code{require} work.) This will cause @var{bar} to be
+loaded when you byte-compile @var{foo}. Otherwise, you risk compiling
+@var{foo} without the necessary macro loaded, and that would produce
+compiled code that won't work right. @xref{Compiling Macros}.
Using @code{eval-when-compile} avoids loading @var{bar} when
the compiled version of @var{foo} is @emph{used}.
@item
-If you define a major mode, make sure to run a hook variable using
-@code{run-hooks}, just as the existing major modes do. @xref{Hooks}.
+Please don't require the @code{cl} package of Common Lisp extensions at
+run time. Use of this package is optional, and it is not part of the
+standard Emacs namespace. If your package loads @code{cl} at run time,
+that could cause name clashes for users who don't use that package.
+
+However, there is no problem with using the @code{cl} package at compile
+time, for the sake of macros. You do that like this:
+
+@example
+(eval-when-compile (require 'cl))
+@end example
+
+@item
+When defining a major mode, please follow the major mode
+conventions. @xref{Major Mode Conventions}.
+
+@item
+When defining a minor mode, please follow the minor mode
+conventions. @xref{Minor Mode Conventions}.
@item
If the purpose of a function is to tell you whether a certain condition
name that ends in @samp{-flag}.
@item
+@cindex reserved keys
+@cindex keys, reserved
Please do not define @kbd{C-c @var{letter}} as a key in your major
modes. These sequences are reserved for users; they are the
-@strong{only} sequences reserved for users, so we cannot do without
-them.
+@strong{only} sequences reserved for users, so do not block them.
-Instead, define sequences consisting of @kbd{C-c} followed by a
-non-letter. These sequences are reserved for major modes.
+Instead, define sequences consisting of @kbd{C-c} followed by a control
+character, a digit, or certain punctuation characters. These sequences
+are reserved for major modes.
-Changing all the major modes in Emacs 18 so they would follow this
-convention was a lot of work. Abandoning this convention would make
-that work go to waste, and inconvenience users.
+Changing all the Emacs major modes to follow this convention was a lot
+of work. Abandoning this convention would make that work go to waste,
+and inconvenience users.
@item
Sequences consisting of @kbd{C-c} followed by @kbd{@{}, @kbd{@}},
may be shadowed from time to time by minor modes.
@item
-You should not bind @kbd{C-h} following any prefix character (including
+Function keys @key{F5} through @key{F9} without modifier keys are
+reserved for users to define.
+
+@item
+Do not bind @kbd{C-h} following any prefix character (including
@kbd{C-c}). If you don't bind @kbd{C-h}, it is automatically available
as a help character for listing the subcommands of the prefix character.
@item
-You should not bind a key sequence ending in @key{ESC} except following
-another @key{ESC}. (That is, it is ok to bind a sequence ending in
+Do not bind a key sequence ending in @key{ESC} except following
+another @key{ESC}. (That is, it is OK to bind a sequence ending in
@kbd{@key{ESC} @key{ESC}}.)
The reason for this rule is that a non-prefix binding for @key{ESC} in
any context prevents recognition of escape sequences as function keys in
that context.
+@item
+Anything which acts like a temporary mode or state which the user can
+enter and leave should define @kbd{@key{ESC} @key{ESC}} or
+@kbd{@key{ESC} @key{ESC} @key{ESC}} as a way to escape.
+
+For a state which accepts ordinary Emacs commands, or more generally any
+kind of state in which @key{ESC} followed by a function key or arrow key
+is potentially meaningful, then you must not define @kbd{@key{ESC}
+@key{ESC}}, since that would preclude recognizing an escape sequence
+after @key{ESC}. In these states, you should define @kbd{@key{ESC}
+@key{ESC} @key{ESC}} as the way to escape. Otherwise, define
+@kbd{@key{ESC} @key{ESC}} instead.
+
@item
Applications should not bind mouse events based on button 1 with the
shift key held down. These events include @kbd{S-mouse-1},
users.
@item
-Modes should redefine @kbd{mouse-2} as a command to follow some sort of
-reference in the text of a buffer, if users usually would not want to
-alter the text in that buffer by hand. Modes such as Dired, Info,
-Compilation, and Occur redefine it in this way.
+@cindex mouse-2
+@cindex references, following
+Special major modes used for read-only text should usually redefine
+@kbd{mouse-2} and @key{RET} to trace some sort of reference in the text.
+Modes such as Dired, Info, Compilation, and Occur redefine it in this
+way.
@item
When a package provides a modification of ordinary Emacs behavior, it is
-good to include a command to enable and disable the feature, Provide a
+good to include a command to enable and disable the feature, provide a
command named @code{@var{whatever}-mode} which turns the feature on or
off, and make it autoload (@pxref{Autoload}). Design the package so
that simply loading it has no visible effect---that should not enable
-the feature. Users will request the feature by invoking the command.
+the feature.@footnote{Consider that the package may be loaded
+arbitrarily by Custom for instance.} Users will request the feature by
+invoking the command.
@item
It is a bad idea to define aliases for the Emacs primitives. Use the
standard names instead.
@item
-Redefining an Emacs primitive is an even worse idea.
-It may do the right thing for a particular program, but
-there is no telling what other programs might break as a result.
+If a package needs to define an alias or a new function for
+compatibility with some other version of Emacs, name it with the package
+prefix, not with the raw name with which it occurs in the other version.
+Here is an example from Gnus, which provides many examples of such
+compatibility issues.
+
+@example
+(defalias 'gnus-point-at-bol
+ (if (fboundp 'point-at-bol)
+ 'point-at-bol
+ 'line-beginning-position))
+@end example
+
+@item
+Redefining (or advising) an Emacs primitive is discouraged. It may do
+the right thing for a particular program, but there is no telling what
+other programs might break as a result.
@item
If a file does replace any of the functions or library programs of
feature, so it is incorrect to change the mark except to supply a value
for the user's benefit. @xref{The Mark}.
-In particular, don't use these functions:
+In particular, don't use any of these functions:
@itemize @bullet
@item
An error message should start with a capital letter but should not end
with a period.
+@item
+In @code{interactive}, if you use a Lisp expression to produce a list
+of arguments, don't try to provide the ``correct'' default values for
+region or position arguments. Instead, provide @code{nil} for those
+arguments if they were not specified, and have the function body
+compute the default value when the argument is @code{nil}. For
+instance, write this:
+
+@example
+(defun foo (pos)
+ (interactive
+ (list (if @var{specified} @var{specified-pos})))
+ (unless pos (setq pos @var{default-pos}))
+ ...)
+@end example
+
+@noindent
+rather than this:
+
+@example
+(defun foo (pos)
+ (interactive
+ (list (if @var{specified} @var{specified-pos}
+ @var{default-pos})))
+ ...)
+@end example
+
+@noindent
+This is so that repetition of the command will recompute
+these defaults based on the current circumstances.
+
+You do not need to take such precautions when you use interactive
+specs @samp{d}, @samp{m} and @samp{r}, because they make special
+arrangements to recompute the argument values on repetition of the
+command.
+
@item
Many commands that take a long time to execute display a message that
-says @samp{Operating...} when they start, and change it to
+says something like @samp{Operating...} when they start, and change it to
@samp{Operating...done} when they finish. Please keep the style of
these messages uniform: @emph{no} space around the ellipsis, and
-@emph{no} period at the end.
+@emph{no} period after @samp{done}.
@item
Try to avoid using recursive edits. Instead, do what the Rmail @kbd{e}
In some other systems there is a convention of choosing variable names
that begin and end with @samp{*}. We don't use that convention in Emacs
Lisp, so please don't use it in your programs. (Emacs uses such names
-only for program-generated buffers.) The users will find Emacs more
+only for special-purpose buffers.) The users will find Emacs more
coherent if all libraries use the same conventions.
@item
Try to avoid compiler warnings about undefined free variables, by adding
-@cdode{defvar} definitions for these variables.
+@code{defvar} definitions for these variables.
+
+Sometimes adding a @code{require} for another package is useful to avoid
+compilation warnings for variables and functions defined in that
+package. If you do this, often it is better if the @code{require} acts
+only at compile time. Here's how to do that:
+
+@example
+(eval-when-compile
+ (require 'foo)
+ (defvar bar-baz))
+@end example
If you bind a variable in one function, and use it or set it in another
function, the compiler warns about the latter function unless the
variable has a definition. But often these variables have short names,
-and it is not clean for Lisp packages to define such variables names.
+and it is not clean for Lisp packages to define such variable names.
Therefore, you should rename the variable to start with the name prefix
used for the other functions and variables in your package.
Don't make a habit of putting close-parentheses on lines by themselves;
Lisp programmers find this disconcerting. Once in a while, when there
is a sequence of many consecutive close-parentheses, it may make sense
-to split them in one or two significant places.
+to split the sequence in one or two significant places.
@item
Please put a copyright notice on the file if you give copies to anyone.
-Use the same lines that appear at the top of the Lisp files in Emacs
-itself. If you have not signed papers to assign the copyright to the
-Foundation, then place your name in the copyright notice in place of the
-Foundation's name.
+Use a message like this one:
+
+@smallexample
+;; Copyright (C) @var{year} @var{name}
+
+;; This program is free software; you can redistribute it and/or
+;; modify it under the terms of the GNU General Public License as
+;; published by the Free Software Foundation; either version 2 of
+;; the License, or (at your option) any later version.
+
+;; This program is distributed in the hope that it will be
+;; useful, but WITHOUT ANY WARRANTY; without even the implied
+;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+;; PURPOSE. See the GNU General Public License for more details.
+
+;; You should have received a copy of the GNU General Public
+;; License along with this program; if not, write to the Free
+;; Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+;; MA 02111-1307 USA
+@end smallexample
+
+If you have signed papers to assign the copyright to the Foundation,
+then use @samp{Free Software Foundation, Inc.} as @var{name}.
+Otherwise, use your name.
@end itemize
@node Compilation Tips
@cindex profiling
@cindex timing programs
@cindex @file{profile.el}
-Use the @file{profile} library to profile your program. See the file
-@file{profile.el} for instructions.
+@cindex @file{elp.el}
+Profile your program with the @file{profile} library or the @file{elp}
+library. See the files @file{profile.el} and @file{elp.el} for
+instructions.
@item
Use iteration rather than recursion whenever possible.
@item
Using the primitive list-searching functions @code{memq}, @code{member},
@code{assq}, or @code{assoc} is even faster than explicit iteration. It
-may be worth rearranging a data structure so that one of these primitive
+can be worth rearranging a data structure so that one of these primitive
search functions can be used.
@item
handled specially.
For example, the following input will show you that @code{aref} is
-compiled specially (@pxref{Array Functions}) while @code{elt} is not
-(@pxref{Sequence Functions}):
+compiled specially (@pxref{Array Functions}):
@example
@group
(get 'aref 'byte-compile)
@result{} byte-compile-two-args
@end group
-
-@group
-(get 'elt 'byte-compile)
- @result{} nil
-@end group
@end example
@item
-If calling a small function accounts for a substantial part of your
+If calling a small function accounts for a substantial part of your
program's running time, make the function inline. This eliminates
the function call overhead. Since making a function inline reduces
the flexibility of changing the program, don't do it unless it gives
@node Documentation Tips
@section Tips for Documentation Strings
- Here are some tips for the writing of documentation strings.
+@findex checkdoc-minor-mode
+ Here are some tips and conventions for the writing of documentation
+strings. You can check many of these conventions by running the command
+@kbd{M-x checkdoc-minor-mode}.
@itemize @bullet
@item
An internal variable or subroutine of a Lisp program might as well have
a documentation string. In earlier Emacs versions, you could save space
by using a comment instead of a documentation string, but that is no
-longer the case.
+longer the case---documentation strings now take up very little space in
+a running Emacs.
+
+@item
+Format the documentation string so that it fits in an Emacs window on an
+80-column screen. It is a good idea for most lines to be no wider than
+60 characters. The first line should not be wider than 67 characters
+or it will look bad in the output of @code{apropos}.
+
+You can fill the text if that looks good. However, rather than blindly
+filling the entire documentation string, you can often make it much more
+readable by choosing certain line breaks with care. Use blank lines
+between topics if the documentation string is long.
@item
The first line of the documentation string should consist of one or two
complete sentences that stand on their own as a summary. @kbd{M-x
-apropos} displays just the first line, and if it doesn't stand on its
-own, the result looks bad. In particular, start the first line with a
-capital letter and end with a period.
+apropos} displays just the first line, and if that line's contents don't
+stand on their own, the result looks bad. In particular, start the
+first line with a capital letter and end with a period.
+
+For a function, the first line should briefly answer the question,
+``What does this function do?'' For a variable, the first line should
+briefly answer the question, ``What does this value mean?''
-The documentation string can have additional lines that expand on the
-details of how to use the function or variable. The additional lines
-should be made up of complete sentences also, but they may be filled if
-that looks good.
+Don't limit the documentation string to one line; use as many lines as
+you need to explain the details of how to use the function or
+variable. Please use complete sentences for the rest of the text too.
@item
-For consistency, phrase the verb in the first sentence of a
-documentation string as an infinitive with ``to'' omitted. For
-instance, use ``Return the cons of A and B.'' in preference to ``Returns
-the cons of A and B@.'' Usually it looks good to do likewise for the
-rest of the first paragraph. Subsequent paragraphs usually look better
-if they have proper subjects.
+For consistency, phrase the verb in the first sentence of a function's
+documentation string as an imperative--for instance, use ``Return the
+cons of A and B.'' in preference to ``Returns the cons of A and B@.''
+Usually it looks good to do likewise for the rest of the first
+paragraph. Subsequent paragraphs usually look better if each sentence
+is indicative and has a proper subject.
@item
Write documentation strings in the active voice, not the passive, and in
``Display text in boldface.''
@item
-Do not start or end a documentation string with whitespace.
+When a command is meaningful only in a certain mode or situation,
+do mention that in the documentation string. For example,
+the documentation of @code{dired-find-file} is:
-@item
-Format the documentation string so that it fits in an Emacs window on an
-80-column screen. It is a good idea for most lines to be no wider than
-60 characters. The first line can be wider if necessary to fit the
-information that ought to be there.
+@example
+In Dired, visit the file or directory named on this line.
+@end example
-However, rather than simply filling the entire documentation string, you
-can make it much more readable by choosing line breaks with care.
-Use blank lines between topics if the documentation string is long.
+@item
+Do not start or end a documentation string with whitespace.
@item
@strong{Do not} indent subsequent lines of a documentation string so
view the documentation. Remember that the indentation before the
starting double-quote is not part of the string!
+@item
+When the user tries to use a disabled command, Emacs displays just the
+first paragraph of its documentation string---everything through the
+first blank line. If you wish, you can choose which information to
+include before the first blank line so as to make this display useful.
+
@item
A variable's documentation string should start with @samp{*} if the
variable is one that users would often want to set interactively. If
all non-@code{nil} values are equivalent and indicate explicitly what
@code{nil} and non-@code{nil} mean.
+@item
+The documentation string for a function that is a yes-or-no predicate
+should start with words such as ``Return t if @dots{}'', to indicate
+explicitly what constitutes ``truth''. The word ``return'' avoids
+starting the sentence with lower-case ``t'', which is somewhat
+distracting.
+
@item
When a function's documentation string mentions the value of an argument
of the function, use the argument name in capital letters as if it were
a name for that value. Thus, the documentation string of the function
-@code{/} refers to its second argument as @samp{DIVISOR}, because the
-actual argument name is @code{divisor}.
+@code{eval} refers to its second argument as @samp{FORM}, because the
+actual argument name is @code{form}:
+
+@example
+Evaluate FORM and return its value.
+@end example
+
+Also write metasyntactic variables in capital letters, such as when you
+show the decomposition of a list or vector into subunits, some of which
+may vary. @samp{KEY} and @samp{VALUE} in the following example
+illustrate this practice:
-Also use all caps for meta-syntactic variables, such as when you show
-the decomposition of a list or vector into subunits, some of which may
-vary.
+@example
+The argument TABLE should be an alist whose elements
+have the form (KEY . VALUE). Here, KEY is ...
+@end example
+
+@item
+Never change the case of a Lisp symbol when you mention it in a doc
+string. If the symbol's name is @code{foo}, write ``foo'', not
+``Foo'' (which is a different symbol).
+
+This might appear to contradict the policy of writing function
+argument values, but there is no real contradiction; the argument
+@emph{value} is not the same thing as the @emph{symbol} which the
+function uses to hold the value.
+
+If this puts a lower-case letter at the beginning of a sentence
+and that annoys you, rewrite the sentence so that the symbol
+is not at the start of it.
+
+@item
+If a line in a documentation string begins with an open-parenthesis,
+write a backslash before the open-parenthesis, like this:
+
+@example
+The argument FOO can be either a number
+\(a buffer position) or a string (a file name).
+@end example
+
+This prevents the open-parenthesis from being treated as the start of a
+defun (@pxref{Defuns,, Defuns, emacs, The GNU Emacs Manual}).
@item
@iftex
around it. For example: @samp{`lambda'}. There are two exceptions:
write @code{t} and @code{nil} without single-quotes.
@end iftex
-@ifinfo
+@ifnottex
When a documentation string refers to a Lisp symbol, write it as it
would be printed (which usually means in lower case), with single-quotes
around it. For example: @samp{lambda}. There are two exceptions: write
-t and nil without single-quotes. (In this manual, we normally do use
-single-quotes for those symbols.)
-@end ifinfo
+t and nil without single-quotes. (In this manual, we use a different
+convention, with single-quotes for all symbols.)
+@end ifnottex
+
+Help mode automatically creates a hyperlink when a documentation string
+uses a symbol name inside single quotes, if the symbol has either a
+function or a variable definition. You do not need to do anything
+special to make use of this feature. However, when a symbol has both a
+function definition and a variable definition, and you want to refer to
+just one of them, you can specify which one by writing one of the words
+@samp{variable}, @samp{option}, @samp{function}, or @samp{command},
+immediately before the symbol name. (Case makes no difference in
+recognizing these indicator words.) For example, if you write
+
+@example
+This function sets the variable `buffer-file-name'.
+@end example
+
+@noindent
+then the hyperlink will refer only to the variable documentation of
+@code{buffer-file-name}, and not to its function documentation.
+
+If a symbol has a function definition and/or a variable definition, but
+those are irrelevant to the use of the symbol that you are documenting,
+you can write the word @samp{symbol} before the symbol name to prevent
+making any hyperlink. For example,
+
+@example
+If the argument KIND-OF-RESULT is the symbol `list',
+this function returns a list of all the objects
+that satisfy the criterion.
+@end example
+
+@noindent
+does not make a hyperlink to the documentation, irrelevant here, of the
+function @code{list}.
+
+To make a hyperlink to Info documentation, write the name of the Info
+node in single quotes, preceded by @samp{info node} or @samp{Info
+node}. The Info file name defaults to @samp{emacs}. For example,
+
+@smallexample
+See Info node `Font Lock' and Info node `(elisp)Font Lock Basics'.
+@end smallexample
@item
Don't write key sequences directly in documentation strings. Instead,
use the @samp{\\[@dots{}]} construct to stand for them. For example,
-instead of writing @samp{C-f}, write @samp{\\[forward-char]}. When
-Emacs displays the documentation string, it substitutes whatever key is
-currently bound to @code{forward-char}. (This is normally @samp{C-f},
-but it may be some other character if the user has moved key bindings.)
-@xref{Keys in Documentation}.
+instead of writing @samp{C-f}, write the construct
+@samp{\\[forward-char]}. When Emacs displays the documentation string,
+it substitutes whatever key is currently bound to @code{forward-char}.
+(This is normally @samp{C-f}, but it may be some other character if the
+user has moved key bindings.) @xref{Keys in Documentation}.
@item
In documentation strings for a major mode, you will want to refer to the
@end group
@end smallexample
-Every function that has no documentation string (because it is use only
-internally within the package it belongs to), should have instead a
-two-semicolon comment right before the function, explaining what the
-function does and how to call it properly. Explain precisely what each
-argument means and how the function interprets its possible values.
-
-@item ;;;
-Comments that start with three semicolons, @samp{;;;}, should start at
-the left margin. Such comments are used outside function definitions to
-make general statements explaining the design principles of the program.
-For example:
+We also normally use two semicolons for comments outside functions.
@smallexample
@group
-;;; This Lisp code is run in Emacs
-;;; when it is to operate as a server
-;;; for other processes.
+;; This Lisp code is run in Emacs
+;; when it is to operate as a server
+;; for other processes.
@end group
@end smallexample
+Every function that has no documentation string (presumably one that is
+used only internally within the package it belongs to), should instead
+have a two-semicolon comment right before the function, explaining what
+the function does and how to call it properly. Explain precisely what
+each argument means and how the function interprets its possible values.
+
+@item ;;;
+Comments that start with three semicolons, @samp{;;;}, should start at
+the left margin. These are used, occasionally, for comments within
+functions that should start at the margin. We also use them sometimes
+for comments that are between functions---whether to use two or three
+semicolons there is a matter of style.
+
Another use for triple-semicolon comments is for commenting out lines
-within a function. We use triple-semicolons for this precisely so that
+within a function. We use three semicolons for this precisely so that
they remain at the left margin.
@smallexample
@noindent
The indentation commands of the Lisp modes in Emacs, such as @kbd{M-;}
-(@code{indent-for-comment}) and @key{TAB} (@code{lisp-indent-line})
+(@code{indent-for-comment}) and @key{TAB} (@code{lisp-indent-line}),
automatically indent comments according to these conventions,
depending on the number of semicolons. @xref{Comments,,
Manipulating Comments, emacs, The GNU Emacs Manual}.
@cindex header comments
@cindex library header comments
- Emacs 19 has conventions for using special comments in Lisp libraries
+ Emacs has conventions for using special comments in Lisp libraries
to divide them into sections and give information such as who wrote
-them. This section explains these conventions. First, an example:
+them. This section explains these conventions.
+
+ We'll start with an example, a package that is included in the Emacs
+distribution.
+
+ Parts of this example reflect its status as part of Emacs; for
+example, the copyright notice lists the Free Software Foundation as the
+copyright holder, and the copying permission says the file is part of
+Emacs. When you write a package and post it, the copyright holder would
+be you (unless your employer claims to own it instead), and you should
+get the suggested copying permission from the end of the GNU General
+Public License itself. Don't say your file is part of Emacs
+if we haven't installed it in Emacs yet!
+
+ With that warning out of the way, on to the example:
@smallexample
@group
;; Keywords: docs
;; This file is part of GNU Emacs.
-@var{copying permissions}@dots{}
+@dots{}
+;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+;; Boston, MA 02111-1307, USA.
@end group
@end smallexample
@item Keywords
This line lists keywords for the @code{finder-by-keyword} help command.
+Please use that command to see a list of the meaningful keywords.
+
This field is important; it's how people will find your package when
they're looking for things by topic area. To separate the keywords, you
can use spaces, commas, or both.
names---they have no standard meanings, so they can't do any harm.
We use additional stylized comments to subdivide the contents of the
-library file. Here is a table of them:
+library file. These should be separated by blank lines from anything
+else. Here is a table of them:
@table @samp
@item ;;; Commentary:
This begins introductory comments that explain how the library works.
-It should come right after the copying permissions.
+It should come right after the copying permissions, terminated by a
+@samp{Change Log}, @samp{History} or @samp{Code} comment line. This
+text is used by the Finder package, so it should make sense in that
+context.
+
+@item ;;; Documentation
+This has been used in some files in place of @samp{;;; Commentary:},
+but @samp{;;; Commentary:} is preferred.
-@item ;;; Change log:
+@item ;;; Change Log:
This begins change log information stored in the library file (if you
-store the change history there). For most of the Lisp
-files distributed with Emacs, the change history is kept in the file
-@file{ChangeLog} and not in the source file at all; these files do
-not have a @samp{;;; Change log:} line.
+store the change history there). For Lisp files distributed with Emacs,
+the change history is kept in the file @file{ChangeLog} and not in the
+source file at all; these files generally do not have a @samp{;;; Change
+Log:} line. @samp{History} is an alternative to @samp{Change Log}.
@item ;;; Code:
This begins the actual code of the program.
HCoop / bpt / emacs.git / blobdiff