# ==================== Things `configure' Might Edit ====================
-MAINTAINER_MODE_FLAG = --disable-maintainer-mode
-@MAINT@MAINTAINER_MODE_FLAG = --enable-maintainer-mode
cache_file = @cache_file@
-CONFIGURE_FLAGS = --cache-file=$(cache_file) $(MAINTAINER_MODE_FLAG)
+CONFIGURE_FLAGS = --cache-file=$(cache_file)
CC=@CC@
CFLAGS=@CFLAGS@
# ==================== Where To Install Things ====================
+# Location to install Emacs.app under GNUstep / Mac OS X.
+# Later values may use these.
+ns_appbindir=@ns_appbindir@
+ns_appresdir=@ns_appresdir@
+# Either yes or no depending on whether this is a relocatable Emacs.app.
+ns_self_contained=@ns_self_contained@
+
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
-# rather than directly by users, and other architecture-dependent
-# data. ${archlibdir} is a subdirectory of this.
+# rather than directly by users (and other architecture-dependent
+# data, although Emacs does not have any). The executables
+# are actually installed in ${archlibdir}, which is (normally)
+# a subdirectory of this.
libexecdir=@libexecdir@
# Where to install Emacs's man pages.
# Where to find the application default.
x_default_search_path=@x_default_search_path@
-# Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
-ns_appbindir=@ns_appbindir@
-ns_appresdir=@ns_appresdir@
-
# Where the etc/emacs.desktop file is to be installed.
desktopdir=$(datarootdir)/applications
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
-# Where to install the lisp files distributed with
+# Where to install the lisp, leim files distributed with
# Emacs. This includes the Emacs version, so that the
# lisp files for different versions of Emacs will install
# themselves in separate directories.
lispdir=@lispdir@
+leimdir=@leimdir@
-# Directories Emacs should search for lisp files specific
-# to this site (i.e. customizations), before consulting
-# ${lispdir}. This should be a colon-separated list of
-# directories.
+# Directories Emacs should search for standard lisp files.
+# The default is ${lispdir}:${leimdir}.
+standardlisppath=@standardlisppath@
+
+# Directories Emacs should search for lisp files specific to this
+# site (i.e. customizations), before consulting ${standardlisppath}.
+# This should be a colon-separated list of directories.
locallisppath=@locallisppath@
# Where Emacs will search to find its lisp files. Before
# changing this, check to see if your purpose wouldn't
# better be served by changing locallisppath. This
# should be a colon-separated list of directories.
+# The default is ${locallisppath}:${standardlisppath}.
lisppath=@lisppath@
# Where Emacs will search for its lisp files while
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =
MKDIR_P = @MKDIR_P@
+LN_S = @LN_S@
# We use gzip to compress installed .el files.
GZIP_PROG = @GZIP_PROG@
EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
-# Subdirectories to make recursively. `lisp' is not included
-# because the compiled lisp files are part of the distribution.
-# leim is not included because it needs special handling.
-#
-# Actually, we now include `lisp' as well, since the compiled files
-# are not included any more in case of bootstrap or in case Emacs was
-# checked out from a VCS.
-SUBDIR = lib lib-src src lisp
+# Subdirectories to make recursively.
+SUBDIR = lib lib-src src lisp leim
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
-# leim's makefile also knows how to install it, so we don't do that here.
-# When installing the info files, we need to do special things to
-# avoid nuking an existing dir file, so we don't do that here;
-# instead, we have written out explicit code in the `install' targets.
-COPYDIR = ${srcdir}/etc ${srcdir}/lisp
-COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
+# Directories that cannot simply be copied, eg info,
+# are treated separately.
+# quail appears twice because in out-of-tree builds, it exists twice.
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
+COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
-all: ${SUBDIR} leim
+all: ${SUBDIR}
+
+.PHONY: all ${SUBDIR} blessmail epaths-force FRC
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
# Generate epaths.h from epaths.in. This target is invoked by `configure'.
-# See comments in configure.in for why it is done this way, as opposed
+# See comments in configure.ac for why it is done this way, as opposed
# to just letting configure generate epaths.h from epaths.in in a
# similar way to how Makefile is made from Makefile.in.
epaths-force: FRC
- @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
- buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
+ @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
+ locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
+ buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
x_default_search_path=`echo ${x_default_search_path}`; \
gamedir=`echo ${gamedir}`; \
sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
- -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";' \
+ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
+ -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
-# For parallel make, src should be built before leim.
-# "export PARALLEL=0" is for SGI's Make, to prevent it from
-# running more than 1 process in the leim directory, especially for
-# the $TIT files there.
-leim: src Makefile FRC
- cd leim && PARALLEL=0 $(MAKE) all $(MFLAGS)
-
lib-src src: lib
src: lib-src FRC
-.RECURSIVE: ${SUBDIR} leim
-
-# We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
-lisp: src
-
-# Maintainers can put a copy of gnulib into $(gnulib_srcdir).
-gnulib_srcdir = ../gnulib
-$(gnulib_srcdir):
- git clone git://git.savannah.gnu.org/gnulib.git $@
-
-# A shorter name that satisfies MS-DOS 8+3 constraints.
-DOS_gnulib_comp.m4 = gl-comp.m4
-
-# Update modules from gnulib, for maintainers, who should have it in
-# $(gnulib_srcdir) (relative to $(srcdir) and should have build tools
-# as per $(gnulib_srcdir)/DEPENDENCIES.
-GNULIB_MODULES = \
- alloca-opt \
- careadlinkat crypto/md5 crypto/sha1 crypto/sha256 crypto/sha512 dtoastr \
- dup2 \
- filemode getloadavg getopt-gnu ignore-value intprops lstat \
- manywarnings mktime pthread_sigmask readlink \
- socklen stdarg stdio strftime strtoimax strtoumax symlink sys_stat \
- warnings
-GNULIB_TOOL_FLAGS = \
- --avoid=msvc-inval --avoid=msvc-nothrow \
- --avoid=raise --avoid=threadlib \
- --conditional-dependencies --import --no-changelog --no-vc-files \
- --makefile-name=gnulib.mk
-sync-from-gnulib: $(gnulib_srcdir)
- -cd $(srcdir)/m4 && cp $(DOS_gnulib_comp.m4) gnulib-comp.m4
- cd $(srcdir) && \
- $(gnulib_srcdir)/gnulib-tool $(GNULIB_TOOL_FLAGS) $(GNULIB_MODULES)
- cd $(srcdir)/m4 && rm gnulib-cache.m4 warn-on-use.m4
- cd $(srcdir)/m4 && mv gnulib-comp.m4 $(DOS_gnulib_comp.m4)
- cp $(gnulib_srcdir)/build-aux/texinfo.tex $(srcdir)/doc/misc
- cp \
- $(gnulib_srcdir)/build-aux/move-if-change \
- $(srcdir)/build-aux
- cd $(srcdir) && autoreconf -i -I m4
-.PHONY: sync-from-gnulib
+# We need to build `emacs' in `src' to compile the *.elc files in `lisp'
+# and `leim'.
+lisp leim: src
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp: Makefile FRC
- cd $@; $(MAKE) all $(MFLAGS) \
+lib lib-src lisp leim: Makefile FRC
+ cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
VCSWITNESS="$$vcswitness"
blessmail: Makefile src FRC
- cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
+ cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
MAKE='${MAKE}' archlibdir='$(archlibdir)'
# We used to have one rule per */Makefile.in, but that leads to race
# conditions with parallel makes, so let's assume that the time stamp on
# ./Makefile is representative of the time stamp on all the other Makefiles.
-Makefile: config.status $(srcdir)/src/config.in \
+#
+# config.status overrides MAKEFILE_NAME with a bogus name when creating
+# src/epaths.h, so that 'make epaths-force' does not recursively invoke
+# config.status and overwrite config.status while executing it (Bug#11214).
+MAKEFILE_NAME = Makefile
+$(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
$(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN)
./config.status
-# Don't erase config.status if make is interrupted while refreshing it.
-.PRECIOUS: config.status
+# Don't erase these files if make is interrupted while refreshing them.
+.PRECIOUS: Makefile config.status
-config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
+MAKE_CONFIG_STATUS = \
if [ -x ./config.status ]; then \
./config.status --recheck; \
else \
./configure $(CONFIGURE_FLAGS); \
fi
+config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
+ $(MAKE_CONFIG_STATUS)
-AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/aclocal.m4
+AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
$(srcdir)/configure: $(AUTOCONF_INPUTS)
cd ${srcdir} && autoconf
-ACLOCAL_INPUTS = @MAINT@ $(srcdir)/m4/$(DOS_gnulib_comp.m4)
+ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
$(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
cd $(srcdir) && aclocal -I m4
-AUTOMAKE_INPUTS = @MAINT@ $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am $(srcdir)/lib/gnulib.mk
+AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
+ $(srcdir)/lib/gnulib.mk
$(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
cd $(srcdir) && automake --gnu -a -c lib/Makefile
+
+# Regenerate files that this makefile would have made, if this makefile
+# had been built by Automake. The name 'am--refresh' is for
+# compatibility with subsidiary Automake-generated makefiles.
am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
.PHONY: am--refresh
# ==================== Installation ====================
+.PHONY: install install-arch-dep install-arch-indep install-doc install-info
+.PHONY: install-man install-etc install-strip uninstall
+
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
-## On AIX, use tar xBf.
-## On Xenix, use tar xpf.
-
-.PHONY: install mkdir
-
-## We delete each directory in ${COPYDESTS} before we copy into it;
-## that way, we can reinstall over directories that have been put in
-## place with their files read-only (perhaps because they are checked
-## into RCS). In order to make this safe, we make sure that the
-## source exists and is distinct from the destination.
-### We do install-arch-indep first because
-### the executable needs the Lisp files and DOC file to work properly.
-install: all install-arch-indep install-arch-dep install-leim blessmail
+install: all install-arch-indep install-doc install-arch-dep blessmail
@true
+## Ensure that $subdir contains a subdirs.el file.
+## Here and elsewhere, we set the umask so that any created files are
+## world-readable.
+## TODO it might be good to warn about non-standard permissions of
+## pre-existing directories, but that does not seem easy.
+write_subdir=if [ -f $${subdir}/subdirs.el ]; \
+ then true; \
+ else \
+ umask 022; \
+ ${MKDIR_P} $${subdir}; \
+ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
+ echo " (normal-top-level-add-subdirs-to-load-path))") \
+ > $${subdir}/subdirs.el; \
+ fi
+
### Install the executables that were compiled specifically for this machine.
-### It would be nice to do something for a parallel make
-### to ensure that install-arch-indep finishes before this starts.
-### (TODO Why would it be nice? Why not just make this depend on
-### install-arch-indep then?)
-install-arch-dep: mkdir
- (cd lib-src; \
+### We do install-arch-indep first because the executable needs the
+### Lisp files and DOC file to work properly.
+install-arch-dep: src install-arch-indep install-doc
+ umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
+ cd lib-src && \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
libexecdir=${libexecdir} archlibdir=${archlibdir} \
- INSTALL_STRIP=${INSTALL_STRIP})
- ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
- -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
- rm -f $(DESTDIR)${bindir}/$(EMACS)
- -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
- if test "${ns_appresdir}" != ""; then \
- ( cd ${ns_appresdir} ; \
- if test -d share/emacs ; then \
- for dir in share/emacs/${version}/*; do \
- rm -fr `basename "$$dir"`; mv "$$dir" . ; done; fi ; \
- if test -d share/info ; then rm -fr info; mv share/info . ; fi ; \
- rm -fr share ) ; \
- ( if cd ${ns_appbindir}/libexec ; then \
- mv -f emacs/${version}/${configuration}/* . ; rm -fr emacs ; \
- rm -f ../bin/emacs ../bin/$(EMACSFULL) ; \
- fi ) ; \
- else true ; fi
-
-## FIXME NS self-contained: rather than installing emacs and
-## EMACSFULL, then deleting them, obviously it would be better to not
-## install them in the first place.
+ INSTALL_STRIP=${INSTALL_STRIP}
+ if test "${ns_self_contained}" = "no"; then \
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
+ chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \
+ if test "x${NO_BIN_LINK}" = x; then \
+ rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
+ cd $(DESTDIR)${bindir} && $(LN_S) $(EMACSFULL) $(EMACS); \
+ fi; \
+ else \
+ subdir=${ns_appresdir}/site-lisp; \
+ ${write_subdir} || exit 1; \
+ rm -rf ${ns_appresdir}/share; \
+ fi
+
+## In the share directory, we are deleting:
+## applications (with emacs.desktop, also found in etc/)
+## emacs (basically empty except for unneeded site-lisp directories)
+## icons (duplicates etc/images/icons/hicolor)
+
+## This is install-etc for everything except self-contained-ns builds.
+## For them, it is empty.
+INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
## Needs to be the user running install, so configure can't set it.
done
### Install the files that are machine-independent.
-### Most of them come straight from the distribution;
-### the exception is the DOC-* files, which are copied
-### from the build directory.
-
-## Note that we copy DOC* and then delete DOC
-## as a workaround for a bug in tar on Ultrix 4.2.
-## Ultrix is no longer supported since 23.1, but the relevant line
-## has another effect. We copy the entire etc/ directory from the
-## source tree first. For an in-tree build, this will include
-## any DOC* files there may be. So rm DOC does have an effect.
-## FIXME When we copy etc we should exclude DOC*, then copy only
-## the relevant one. We cannot delete DOC* from the destination directory,
-## because that may include pre-existing files from another emacs.
+### Most of them come straight from the distribution; the exception is
+### the DOC file, which is copied from the build directory.
-## We install only the relevant DOC file if possible
-## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
-## (Note "otherwise" is inaccurate since 2009-08-23.)
+## We delete each directory in ${COPYDESTS} before we copy into it;
+## that way, we can reinstall over directories that have been put in
+## place with their files read-only (perhaps because they are checked
+## into RCS). In order to make this safe, we make sure that the
+## source exists and is distinct from the destination.
-## If people complain about the h flag in tar command, take that out.
-## That flag is also used in leim/Makefile.in
+## We delete etc/DOC* because there may be irrelevant DOC files from
+## other builds in the source directory. This is ok because we just
+## deleted the entire installed etc/ directory and recreated it.
+## install-doc installs the relevant DOC.
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
-install-arch-indep: mkdir info install-etc
- -set ${COPYDESTS} ; \
- unset CDPATH; \
- for dir in ${COPYDIR} ; do \
- if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
- rm -rf $$1 ; \
- fi ; \
- shift ; \
+## I'm not sure creating locallisppath here serves any useful purpose.
+## If it has the default value, then the later write_subdir commands
+## will ensure all these components exist.
+## This will only do something if locallisppath has a non-standard value.
+## Is it really Emacs's job to create those directories?
+## Should we also be ensuring they contain subdirs.el files?
+## It would be easy to do, just use write_subdir.
+
+## Note that we use tar instead of plain old cp -R/-r because the latter
+## is apparently not portable (even in 2012!).
+## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
+## I have no idea which platforms Emacs supports where cp -R does not
+## work correctly, and therefore no idea when tar can be replaced.
+## See also these comments from 2004 about cp -r working fine:
+## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
+install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
+ umask 022 ; \
+ locallisppath='${locallisppath}'; \
+ IFS=:; \
+ for d in $$locallisppath; do \
+ ${MKDIR_P} "$(DESTDIR)$$d"; \
done
-set ${COPYDESTS} ; \
- mkdir ${COPYDESTS} ; \
- chmod ugo+rx ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
+ [ -d $${dir} ] || exit 1 ; \
dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
- && (echo "Copying $${dir} to $${dest}..." ; \
- (cd $${dir}; tar -chf - . ) \
- | (cd $${dest}; umask 022; \
- tar -xvf - && cat > /dev/null) || exit 1; \
- find $${dest} -exec chown $${installuser} {} ';' ;\
- for subdir in `find $${dest} -type d -print` ; do \
- chmod a+rx $${subdir} ; \
- rm -f $${subdir}/.gitignore ; \
- rm -f $${subdir}/.arch-inventory ; \
- rm -f $${subdir}/.DS_Store ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/.\#* ; \
- rm -f $${subdir}/*~ ; \
- rm -f $${subdir}/*.orig ; \
- [ "$${dir}" != "${srcdir}/etc" ] && \
- rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
- rm -f $${subdir}/ChangeLog* ; \
- done) ; \
+ [ -d $${dest} ] && \
+ [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
+ continue ; \
+ if [ "$${dir}" = "leim/quail" ]; then \
+ [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
+ continue ; \
+ else \
+ rm -rf $${dest} ; \
+ umask 022; ${MKDIR_P} $${dest} ; \
+ fi ; \
+ echo "Copying $${dir} to $${dest}..." ; \
+ (cd $${dir}; tar -chf - . ) \
+ | (cd $${dest}; umask 022; \
+ tar -xvf - && cat > /dev/null) || exit 1; \
+ [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
+ for subdir in `find $${dest} -type d -print` ; do \
+ rm -f $${subdir}/.gitignore ; \
+ rm -f $${subdir}/.arch-inventory ; \
+ rm -f $${subdir}/.DS_Store ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ [ "$${dir}" != "${srcdir}/etc" ] && \
+ rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
+ done ; \
+ find $${dest} -exec chown $${installuser} {} ';' ;\
done
+ -rm -f $(DESTDIR)${leimdir}/leim-list.el
+ ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
-rm -f $(DESTDIR)${lispdir}/subdirs.el
- $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
- if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
- then true; \
- else \
- (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
- echo " (normal-top-level-add-subdirs-to-load-path))") \
- > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
- fi
- chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
- -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
- then true; \
- else \
- (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
- echo " (normal-top-level-add-subdirs-to-load-path))") \
- > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
- fi
- -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
+ umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
+ subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
+ ${write_subdir}
+ subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
+ ${write_subdir} || true
+ [ -z "${GZIP_PROG}" ] || \
+ ( echo "Compressing *.el ..." ; \
+ unset CDPATH; \
+ thisdir=`/bin/pwd`; \
+ for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
+ cd $${thisdir} ; \
+ cd $${dir} || exit 1 ; \
+ for f in `find . -name "*.elc" -print`; do \
+ ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
+ done ; \
+ done )
+ -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
+
+# The last chmod isn't needed at present.
+
+## We install only the relevant DOC file if possible
+## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
+## (Note "otherwise" is inaccurate since 2009-08-23.)
+
+## Note that install-arch-indep deletes and recreates the entire
+## installed etc/ directory, so we need it to run before this does.
+install-doc: src install-arch-indep
-unset CDPATH; \
- if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
+ umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
+ if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
then \
fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
if [ -f "./etc/DOC-$${fullversion}" ]; \
fi; \
echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
- (cd $(DESTDIR)$(docdir); \
- $(set_installuser); \
- chown $${installuser} DOC*; \
- if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
- else true; fi
- -unset CDPATH; \
- if [ -n "${GZIP_PROG}" ]; \
- then \
- echo "Compressing *.el ..." ; \
- (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
- ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
- done) \
+ $(set_installuser); \
+ chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \
else true; fi
+
+install-info: info
+ umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
-unset CDPATH; \
thisdir=`/bin/pwd`; \
- if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
- then \
+ [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
(cd $(DESTDIR)${infodir}; \
- if [ -f dir ]; then true; \
- else \
+ [ -f dir ] || \
(cd $${thisdir}; \
- ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
- chmod a+r $(DESTDIR)${infodir}/dir); \
- fi; \
+ ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
- chmod a+r $(DESTDIR)${infodir}/$$f; \
- if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
- rm -f $(DESTDIR)${infodir}/$$f.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
- else true; fi; \
+ ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
+ rm -f $(DESTDIR)${infodir}/$$f.gz; \
+ ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
done; \
(cd $${thisdir}; \
${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
- done); \
- else true; fi
- -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
+ done)
+
+install-man:
+ umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
(cd $${thisdir}; \
- ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
- chmod a+r $(DESTDIR)${man1dir}/$${page}; \
- if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
- rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
- ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
- else true; fi ); \
+ ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}); \
+ ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
+ rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
+ ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
done
## Install those items from etc/ that need to end up elsewhere.
-install-etc: mkdir
+install-etc:
+ umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
$(DESTDIR)${desktopdir}/emacs.desktop
- for icon in $(iconsrcdir)/*/*/apps/*.* \
- $(iconsrcdir)/*/*/mimetypes/*.*; do \
- if [ -r $${icon} ]; then \
- iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
- ${INSTALL_DATA} $${icon} $${iicon} ; \
- fi ; \
+ thisdir=`/bin/pwd`; \
+ cd ${iconsrcdir} || exit 1; umask 022 ; \
+ for dir in */*/apps */*/mimetypes; do \
+ [ -d $${dir} ] || continue ; \
+ ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
+ for icon in $${dir}/*.*; do \
+ [ -r $${icon} ] || continue ; \
+ ( cd $${thisdir}; \
+ ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${icon} ) \
+ || exit 1; \
+ done ; \
done
-### Install LEIM files. Although they are machine-independent, we
-### have separate target here instead of including it in
-### `install-arch-indep'. People who extracted LEIM files after they
-### installed Emacs itself can install only LEIM files by this target.
-install-leim: leim/Makefile mkdir
- cd leim && $(MAKE) $(MFLAGS) install
-
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
$(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
-### Build all the directories we're going to install Emacs in.
-### We set the umask so that any created directories are world-readable.
-### FIXME it would be good to warn about non-standard permissions of
-### pre-existing directories, but that does not seem easy.
-mkdir: FRC
- icondirs= ; \
- for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
- if [ -d $${dir} ]; then \
- icondirs="$${icondirs} $${dir}" ; \
- fi ; \
- done ; \
- icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
- umask 022 ; \
- $(MKDIR_P) $(DESTDIR)${datadir} ${COPYDESTS} \
- $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
- $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
- $(DESTDIR)${datadir}/emacs/site-lisp \
- $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
- $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
- $(DESTDIR)${desktopdir} $${icondirs}
-
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
uninstall:
- (cd lib-src; \
+ cd lib-src && \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
- bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
+ bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
-unset CDPATH; \
for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
if [ -d $${dir} ]; then \
- case `(cd $${dir} ; /bin/pwd)` in \
- `(cd ${srcdir} ; /bin/pwd)`* ) ;; \
+ case `cd $${dir} ; /bin/pwd` in \
+ `cd ${srcdir} ; /bin/pwd`* ) ;; \
* ) rm -rf $${dir} ;; \
esac ; \
case $${dir} in \
# ==================== Cleaning up and miscellanea ====================
-.PHONY: mostlyclean clean distclean maintainer-clean extraclean
+.PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
### `mostlyclean'
### Like `clean', but may refrain from deleting a few files that people
(cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
[ ! -f config.log ] || mv -f config.log config.log~
${top_bootclean}
-## configure; make bootstrap replaces the real config.log from configure
-## with the truncated one from config.status. The former is more useful.
### `maintainer-clean'
### Delete everything from the current directory that can be
### the coding standards seem to come from. It's like distclean, but
### it deletes backup and autosave files too.
extraclean:
- for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
+ for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
${top_maintainer_clean}
-rm -f config-tmp-*
-rm -f *~ \#*
# The src subdir knows how to do the right thing
# even when the build directory and source dir are different.
+.PHONY: TAGS tags
TAGS tags: lib lib-src src
cd src; $(MAKE) $(MFLAGS) tags
dist:
cd ${srcdir}; ./make-dist
-.PHONY: info dvi dist check html
+.PHONY: info dvi dist check html info-real force-info check-info-dir
info-real:
(cd doc/emacs; $(MAKE) $(MFLAGS) info)
.PHONY: bootstrap
-## configure; make bootstrap replaces the real config.log from configure
-## with the truncated one from config.status. The former is more useful.
+# Bootstrapping does the following:
+# * Remove files to start from a clean slate.
+# * Run autogen.sh, but don't worry about exit status 101 (missing tools).
+# * Build Makefile, to build the build procedure itself.
+# * Do the actual build.
bootstrap: bootstrap-clean FRC
- if [ -x ./config.status ]; then \
- ./config.status; \
- else \
- ./configure $(CONFIGURE_FLAGS); \
- fi
+ cd $(srcdir) && { ./autogen.sh || test $$? -eq 101; }
+ $(MAKE_CONFIG_STATUS)
$(MAKE) $(MFLAGS) info all
.PHONY: check-declare