ALLOCA=@ALLOCA@
LN_S=@LN_S@
CFLAGS=@CFLAGS@
+LDFLAGS=@LDFLAGS@
+CPPFLAGS=@CPPFLAGS@
C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
YACC=@YACC@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
+# By default, we uphold the dignity of our programs.
+INSTALL_STRIP =
# ============================= Targets ==============================
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
# and you cannot remake them without installing Emacs first.
-SUBDIR = lib-src src
+SUBDIR = lib-src src leim
# The makefiles of the directories in $SUBDIR.
-SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile
+SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
+# leim's makefile also knows how to install it, so we don't do that here.
# When installing the info files, we need to do special things to
# avoid nuking an existing dir file, so we don't do that here;
# instead, we have written out explicit code in the `install' targets.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = ${etcdir} ${lispdir}
-all: paths-force ${SUBDIR}
+all: ${SUBDIR}
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
-# Note that sed is not in /bin on 386bsd.
-src/paths.h: Makefile ${srcdir}/src/paths.in
- @echo "Producing \`src/paths.h' from \`src/paths.in'."
+# Generate paths.h from paths.in. This target is invoked by `configure'.
+paths-force: FRC
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
sed < ${srcdir}/src/paths.in > paths.h.$$$$ \
-e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
${srcdir}/move-if-change paths.h.$$$$ src/paths.h
-# For `make all',
-# we force the rebuilding of src/paths.h because the user might give
-# make different values for the various directories. Since we use
-# move-if-change, src/paths.h only actually changes if the user did
-# something notable, so the only unnecessary work we do is in building
-# paths.h.$$, which isn't much.
-# Note that sed is not in /bin on 386bsd.
-# We depend on src/paths.h here to prevent simultaneous execution of
-# that rule and this one, in a parallel make.
-# It is possible for paths.h to be updated twice--but that would happen anyway.
-paths-force: FRC src/paths.h
- @echo "Producing \`src/paths.h' from \`src/paths.in'."
- @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
- buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
- sed < ${srcdir}/src/paths.in > paths.h.$$$$ \
- -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
- -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
- -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
- -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
- -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
- -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
- -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
- -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') && \
- ${srcdir}/move-if-change paths.h.$$$$ src/paths.h
+src: lib-src FRC
-src: lib-src FRC src/paths.h
-
-# This ought to depend on src/paths.h, so that in parallel make
-# src/paths.h will be available for the compilations in lib-src.
-# But that causes trouble in `make install' if a different prefix
-# is specified at that time.
-lib-src: FRC src/paths.h
+lib-src: FRC src/config.stamp
.RECURSIVE: ${SUBDIR}
src/Makefile: src/Makefile.in config.status
./config.status
+src/config.stamp: src/config.in config.status
+ ./config.status
+ touch src/config.stamp
+
lib-src/Makefile: lib-src/Makefile.in config.status
./config.status
lwlib/Makefile: lwlib/Makefile.in config.status
./config.status
+leim/Makefile: leim/Makefile.in config.status
+ ./config.status
+
# ==================== Installation ====================
## If we let lib-src do its own installation, that means we
## place with their files read-only (perhaps because they are checked
## into RCS). In order to make this safe, we make sure that the
## source exists and is distinct from the destination.
-## We don't depend on `all', but rather on ${SUBDIR}, so that we won't
-## ever modify src/paths.h.
### We do install-arch-indep first because
### the executable needs the Lisp files and DOC file to work properly.
-install: ${SUBDIR} install-arch-indep install-arch-dep blessmail
+install: all install-arch-indep install-arch-dep blessmail install-leim
@true
### Install the executables that were compiled specifically for this machine.
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
- libexecdir=${libexecdir} archlibdir=${archlibdir})
- ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version}
+ libexecdir=${libexecdir} archlibdir=${archlibdir} \
+ INSTALL_STRIP=${INSTALL_STRIP})
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/emacs-${version}
-chmod 1755 ${bindir}/emacs-${version}
rm -f ${bindir}/$(EMACS)
-ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
### Install the files that are machine-independent.
### Most of them come straight from the distribution;
### the exception is the DOC-* files, which are copied
-### from the build directory.
+## from the build directory.
-### Note that we copy DOC* and then delete DOC
-### as a workaround for a bug in tar on Ultrix 4.2.
+## Note that we copy DOC* and then delete DOC
+## as a workaround for a bug in tar on Ultrix 4.2.
install-arch-indep: mkdir
-set ${COPYDESTS} ; \
for dir in ${COPYDIR} ; do \
chmod a+r ${man1dir}/$${page}${manext}); \
done
+### Install LEIM files. Although they are machine-independent, we
+### have separate target here instead of including it in
+### `install-arch-indep'. People who extracted LEIM files after they
+### insalled Emacs itself can install only LEIM files by this target.
+install-leim: leim/Makefile
+ cd leim; $(MAKE) install
+
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
+ $(MAKE) INSTALL_STRIP=-s
### Build all the directories we're going to install Emacs in. Since
### we may be creating several layers of directories (for example,
(cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
-(cd man && $(MAKE) $(MFLAGS) mostlyclean)
+ (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
### `clean'
### Delete all files from the current directory that are normally
(cd lwlib; $(MAKE) $(MFLAGS) clean)
(cd lib-src; $(MAKE) $(MFLAGS) clean)
-(cd man && $(MAKE) $(MFLAGS) clean)
+ (cd leim; $(MAKE) $(MFLAGS) clean)
### `distclean'
### Delete all files from the current directory that are created by
top_distclean=\
rm -f config.status config.cache config.log ; \
rm -f Makefile ${SUBDIR_MAKEFILES} ; \
- (cd lock && (rm * || true))
+ (cd lock && (rm -f * || true))
distclean: FRC
(cd src; $(MAKE) $(MFLAGS) distclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
(cd lwlib; $(MAKE) $(MFLAGS) distclean)
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
(cd man && $(MAKE) $(MFLAGS) distclean)
+ (cd leim; $(MAKE) $(MFLAGS) distclean)
${top_distclean}
### `maintainer-clean'
(cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
-(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
+ (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
${top_distclean}
### This doesn't actually appear in the coding standards, but Karl
@echo "We don't have any tests for GNU Emacs yet."
dist:
- $(srcdir)/update-subdirs ${srcdir}/lisp
cd ${srcdir}; make-dist
.PHONY: info dvi dist check
HCoop / bpt / emacs.git / blobdiff