### @configure_input@
-# Copyright (C) 1992-2013 Free Software Foundation, Inc.
+# Copyright (C) 1992-2014 Free Software Foundation, Inc.
# This file is part of GNU Emacs.
#
# make extraclean
# Still more severe - delete backup and autosave files, too.
+# Also generated files that do not normally change and can be slow
+# to rebuild (eg leim/ja-dic).
#
# make bootstrap
# Removes all the compiled files to force a new bootstrap from a
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
-# Where to install the lisp, leim files distributed with
-# Emacs. This includes the Emacs version, so that the
-# lisp files for different versions of Emacs will install
-# themselves in separate directories.
+# Where to install the lisp files distributed with Emacs.
+# This includes the Emacs version, so that the lisp files for different
+# versions of Emacs will install themselves in separate directories.
lispdir=@lispdir@
-leimdir=@leimdir@
# Directories Emacs should search for standard lisp files.
-# The default is ${lispdir}:${leimdir}.
+# The default is ${lispdir}.
standardlisppath=@standardlisppath@
# Directories Emacs should search for lisp files specific to this
# The default is ${locallisppath}:${standardlisppath}.
lisppath=@lisppath@
-# Where Emacs will search for its lisp files while
-# building. This is only used during the process of
-# compiling Emacs, to help Emacs find its lisp files
-# before they've been installed in their final location.
+# Where Emacs will search for its lisp files while building.
+# This is only used during the process of compiling Emacs,
+# to help Emacs find its lisp files before they've been installed
+# in their final location.
# This should be a colon-separated list of directories.
# Normally it points to the lisp/ directory in the sources.
+# NB lread.c relies on lisp/ being first here.
buildlisppath=${abs_srcdir}/lisp
# Where to install the other architecture-independent
EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
# Subdirectories to make recursively.
-SUBDIR = $(NTDIR) lib lib-src src lisp leim
+SUBDIR = $(NTDIR) lib lib-src src lisp
# The subdir makefiles created by config.status.
SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
# Subdirectories to install, and where they'll go. lib-src's and nt's
# makefiles know how to install them, so we don't do that here.
# Directories that cannot simply be copied, eg info, are treated
-# separately. quail appears twice because in out-of-tree builds, it
-# exists twice.
-COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
-COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}/ja-dic" "$(DESTDIR)${leimdir}/quail" "$(DESTDIR)${leimdir}/quail"
+# separately.
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp
+COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}"
all: ${SUBDIR}
epaths-force-w32: FRC
@(w32srcdir=`${srcdir}/build-aux/msys-to-w32 "${srcdir}"`; \
w32prefix=`${srcdir}/build-aux/msys-to-w32 "${prefix}" N`; \
- w32prefixpattern=`echo "${w32prefix}" | ${msys_sed_sh_escape}` ; \
+ w32prefixpattern=`echo "$${w32prefix}" | ${msys_sed_sh_escape}` ; \
w32locallisppath=`${srcdir}/build-aux/msys-to-w32 "${locallisppath}" N ":" "\\;" | ${msys_w32prefix_subst}` ; \
sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
-e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${w32locallisppath}"'";' \
src: lib-src
-# We need to build `emacs' in `src' to compile the *.elc files in `lisp'
-# and `leim'.
-lisp leim: src
+# We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
+lisp: src
# These targets should be "${SUBDIR} without `src'".
-lib lib-src lisp leim nt: Makefile FRC
+lib lib-src lisp nt: Makefile FRC
cd $@ && $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
# file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
# all preloaded elisp files, and only then dump the actual src/emacs, which
# is not wrong, but is overkill in 99.99% of the cases.
+#
+# Note the use of single quotes in the value of vcswitness.
+# This passes an unexpanded $srcdir to src's Makefile, which then
+# expands it using its own value of srcdir (which points to the
+# source directory of src/).
src: Makefile FRC
dirstate='.bzr/checkout/dirstate'; \
vcswitness='$$(srcdir)/../'$$dirstate; \
$(MAKE) install $(MFLAGS) prefix="${prefix}" \
exec_prefix="${exec_prefix}" bindir="${bindir}" \
libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
+ datadir="${datadir}" \
INSTALL_STRIP=${INSTALL_STRIP}
## In the share directory, we are deleting:
## work correctly, and therefore no idea when tar can be replaced.
## See also these comments from 2004 about cp -r working fine:
## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
-install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
+install-arch-indep: lisp install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
-set ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
[ "$$exp_dest" = "`cd $${dir} && /bin/pwd`" ] && continue ; \
else true; \
fi; \
- if [ "$${dir}" = "leim/quail" ]; then \
- [ "`cd $${dir} && /bin/pwd`" = "`cd ${srcdir}/leim/quail && /bin/pwd`" ] && \
- continue ; \
- else \
- rm -rf "$${dest}" ; \
- umask 022; ${MKDIR_P} "$${dest}" ; \
- fi ; \
+ rm -rf "$${dest}" ; \
+ umask 022; ${MKDIR_P} "$${dest}" ; \
echo "Copying $${dir} to $${dest}..." ; \
(cd $${dir}; tar -chf - . ) \
| (cd "$${dest}"; umask 022; \
done ); \
find "$${dest}" -exec chown $${installuser} {} ';' ;\
done
- -rm -f "$(DESTDIR)${leimdir}/leim-list.el"
- ${INSTALL_DATA} leim/leim-list.el "$(DESTDIR)${leimdir}/leim-list.el"
-rm -f "$(DESTDIR)${lispdir}/subdirs.el"
umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}"
subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \
${write_subdir}
subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \
${write_subdir} || true
- [ -z "${GZIP_PROG}" ] || \
- ( echo "Compressing *.el ..." ; \
- unset CDPATH; \
- thisdir=`/bin/pwd`; \
- for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}"; do \
- cd "$${thisdir}" ; \
- cd "$${dir}" || exit 1 ; \
- for f in `find . -name "*.elc" -print`; do \
- f_el=`echo "$$f" | sed 's/.elc$$/.el/'`; \
- ${GZIP_PROG} -9n "$$f_el" ; \
- done ; \
- done )
+ [ -z "${GZIP_PROG}" ] || { \
+ echo "Compressing *.el ..." && \
+ cd "$(DESTDIR)${lispdir}" && \
+ find . -name '*.elc' -exec $(SHELL) -c \
+ '${GZIP_PROG} -9n `expr "$$1" : "\\(.*\\)c"`' dummy '{}' ';'; \
+ }
-chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
## The above chmods are needed because "umask 022; tar ..." is not
chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
else true; fi
+## FIXME:
+## If info/dir is missing, but we have install-info, we should let
+## that handle it. If info/dir is present and we do not have install-info,
+## we should check for missing entries and add them by hand.
+##
+## FIXME:
+## If HAVE_MAKEINFO = no and there are no info files, do not install info/dir.
install-info: info
umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
-unset CDPATH; \
if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \
true; \
else \
- (cd "$(DESTDIR)${infodir}"; \
- [ -f dir ] || \
- (cd "$${thisdir}"; \
- ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir") ); \
+ [ -f "$(DESTDIR)${infodir}/dir" ] || \
+ [ ! -f ${srcdir}/info/dir ] || \
+ ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir"; \
info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
cd ${srcdir}/info ; \
for elt in ${INFO_NONMISC} $${info_misc}; do \
-cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean
-cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
- cd leim && $(MAKE) $(MFLAGS) mostlyclean
### `clean'
### Delete all files from the current directory that are normally
-cd doc/misc && $(MAKE) $(MFLAGS) clean
-cd doc/lispref && $(MAKE) $(MFLAGS) clean
-cd doc/lispintro && $(MAKE) $(MFLAGS) clean
- cd leim && $(MAKE) $(MFLAGS) clean
cd nextstep && $(MAKE) $(MFLAGS) clean
### `bootclean'
cd leim && $(MAKE) $(MFLAGS) distclean
cd lisp && $(MAKE) $(MFLAGS) distclean
cd nextstep && $(MAKE) $(MFLAGS) distclean
- for dir in test/automated admin/unidata; do \
+ for dir in test/automated admin/grammars admin/unidata; do \
[ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) distclean); \
done
${top_distclean}
-cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean
-cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
- cd leim && $(MAKE) $(MFLAGS) maintainer-clean
+ cd leim && $(MAKE) $(MFLAGS) bootstrap-clean
cd lisp && $(MAKE) $(MFLAGS) bootstrap-clean
cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
- for dir in test/automated admin/unidata; do \
+ for dir in test/automated admin/grammars admin/unidata; do \
[ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) bootstrap-clean); \
done
[ ! -f config.log ] || mv -f config.log config.log~
+ rm -rf ${srcdir}/info
${top_bootclean}
### `maintainer-clean'
rm -fr autom4te.cache
maintainer-clean: bootstrap-clean FRC
cd src && $(MAKE) $(MFLAGS) maintainer-clean
+ cd leim && $(MAKE) $(MFLAGS) maintainer-clean
cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
- for dir in test/automated admin/unidata; do \
+ for dir in test/automated admin/grammars admin/unidata; do \
[ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) maintainer-clean); \
done
${top_maintainer_clean}
t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
.PHONY: $(DOCS) docs pdf ps
-.PHONY: info dvi dist check html info-real force-info check-info-dir
+.PHONY: info dvi dist check html info-real info-dir force-info check-info
## TODO add etc/refcards.
docs: $(DOCS)
pdf: $(PDFS)
ps: $(PSS)
+info-dir: ${srcdir}/info/dir
+
+## Not strictly necessary, but speeds things up a bit by stopping
+## the info-dir rule from running when not needed.
+## Hopefully doc/misc/*.texi is not too long for some systems?
+info_dir_deps = ${srcdir}/build-aux/dir_top \
+ ${srcdir}/doc/emacs/emacs.texi \
+ ${srcdir}/doc/lispintro/emacs-lisp-intro.texi \
+ ${srcdir}/doc/lispref/elisp.texi ${srcdir}/doc/misc/*.texi
+
+## It would be much simpler if info/dir was only created in the
+## installation location by the install-info rule, but we also
+## need one in the source directory for people running uninstalled.
+## FIXME it would be faster to use the install-info program if we have it,
+## but then we would need to depend on info-real, which would
+## slow down parallelization.
+${srcdir}/info/dir: ${info_dir_deps}
+ tempfile=info-dir.$$$$; \
+ rm -f $${tempfile}; \
+ thisdir=`pwd`; \
+ (cd ${srcdir} && ./build-aux/make-info-dir $${thisdir}/$${tempfile}); \
+ ${srcdir}/build-aux/move-if-change $${tempfile} ${srcdir}/info/dir
INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
install-lispintro-dvi install-misc-dvi
@if test "$(HAVE_MAKEINFO)" = "no"; then \
echo "Configured --without-makeinfo, not building manuals" ; \
else \
- $(MAKE) $(MFLAGS) info-real ; \
+ $(MAKE) $(MFLAGS) info-real info-dir; \
fi
-# The info/dir file must be updated by hand when new manuals are added.
-# Cannot add an info/dir entry for efaq-w32 since it is not installed
-# on all platforms.
-check-info-dir: info
+## build-aux/make-info-dir expects only certain dircategories.
+check-info: info
cd info ; \
- missing= ; \
+ bad= ; \
for file in *; do \
test -f "$${file}" || continue ; \
case $${file} in \
- *-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \
+ *-[0-9]*|COPYING|dir) continue ;; \
esac ; \
- file=`echo $${file} | sed 's/\.info//'` ; \
- grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
+ cat=`sed -n 's/^INFO-DIR-SECTION //p' $${file}`; \
+ case $${cat} in \
+ "Texinfo documentation system" | "Emacs"| "Emacs lisp" | \
+ "Emacs editing modes" | "Emacs network features" | \
+ "Emacs misc features" | "Emacs lisp libraries" ) : ;; \
+ *) bad="$${bad} $${file}" ;; \
+ esac; \
done ; \
- if test -n "$${missing}"; then \
- echo "Missing info/dir entries: $${missing}" ; \
+ if test -n "$${bad}"; then \
+ echo "Unexpected dircategory in: $${bad}" ; \
exit 1 ; \
fi ; \
- echo "info/dir is OK"
+ echo "info files are OK"
#### Bootstrapping.
echo "You must build Emacs to use this command"; \
exit 1; \
fi
- cd leim && $(MAKE) $(MFLAGS) $@
cd lisp && $(MAKE) $(MFLAGS) $@