#include <config.h>
#include <setjmp.h>
+
+#include <intprops.h>
+
#include "lisp.h"
#include "intervals.h"
#include "buffer.h"
int inherit);
static void gap_left (EMACS_INT charpos, EMACS_INT bytepos, int newgap);
static void gap_right (EMACS_INT charpos, EMACS_INT bytepos);
-static void adjust_markers_gap_motion (EMACS_INT from, EMACS_INT to,
- EMACS_INT amount);
static void adjust_markers_for_insert (EMACS_INT from, EMACS_INT from_byte,
EMACS_INT to, EMACS_INT to_byte,
int before_markers);
EMACS_INT, EMACS_INT, EMACS_INT);
static void adjust_point (EMACS_INT nchars, EMACS_INT nbytes);
-Lisp_Object Fcombine_after_change_execute (void);
+static Lisp_Object Fcombine_after_change_execute (void);
/* List of elements of the form (BEG-UNCHANGED END-UNCHANGED CHANGE-AMOUNT)
describing changes which happened while combine_after_change_calls
END-UNCHANGED is the number of chars after the changed range,
and CHANGE-AMOUNT is the number of characters inserted by the change
(negative for a deletion). */
-Lisp_Object combine_after_change_list;
+static Lisp_Object combine_after_change_list;
/* Buffer which combine_after_change_list is about. */
-Lisp_Object combine_after_change_buffer;
+static Lisp_Object combine_after_change_buffer;
Lisp_Object Qinhibit_modification_hooks;
+
+static void signal_before_change (EMACS_INT, EMACS_INT, EMACS_INT *);
\f
#define CHECK_MARKERS() \
- if (check_markers_debug_flag) \
- check_markers (); \
- else
+ do \
+ { \
+ if (check_markers_debug_flag) \
+ check_markers (); \
+ } \
+ while (0)
-void
+static void
check_markers (void)
{
register struct Lisp_Marker *tail;
memmove (to, from, i);
}
- /* Adjust markers, and buffer data structure, to put the gap at BYTEPOS.
- BYTEPOS is where the loop above stopped, which may be what was specified
- or may be where a quit was detected. */
- adjust_markers_gap_motion (bytepos, GPT_BYTE, GAP_SIZE);
+ /* Adjust buffer data structure, to put the gap at BYTEPOS.
+ BYTEPOS is where the loop above stopped, which may be what
+ was specified or may be where a quit was detected. */
GPT_BYTE = bytepos;
GPT = charpos;
if (bytepos < charpos)
from += i, to += i;
}
- adjust_markers_gap_motion (GPT_BYTE + GAP_SIZE, bytepos + GAP_SIZE,
- - GAP_SIZE);
GPT = charpos;
GPT_BYTE = bytepos;
if (bytepos < charpos)
QUIT;
}
\f
-/* Add AMOUNT to the byte position of every marker in the current buffer
- whose current byte position is between FROM (exclusive) and TO (inclusive).
-
- Also, any markers past the outside of that interval, in the direction
- of adjustment, are first moved back to the near end of the interval
- and then adjusted by AMOUNT.
-
- When the latter adjustment is done, if AMOUNT is negative,
- we record the adjustment for undo. (This case happens only for
- deletion.)
-
- The markers' character positions are not altered,
- because gap motion does not affect character positions. */
-
-int adjust_markers_test;
-
-static void
-adjust_markers_gap_motion (EMACS_INT from, EMACS_INT to, EMACS_INT amount)
-{
- /* Now that a marker has a bytepos, not counting the gap,
- nothing needs to be done here. */
-#if 0
- Lisp_Object marker;
- register struct Lisp_Marker *m;
- register EMACS_INT mpos;
-
- marker = BUF_MARKERS (current_buffer);
-
- while (!NILP (marker))
- {
- m = XMARKER (marker);
- mpos = m->bytepos;
- if (amount > 0)
- {
- if (mpos > to && mpos < to + amount)
- {
- if (adjust_markers_test)
- abort ();
- mpos = to + amount;
- }
- }
- else
- {
- /* Here's the case where a marker is inside text being deleted.
- AMOUNT can be negative for gap motion, too,
- but then this range contains no markers. */
- if (mpos > from + amount && mpos <= from)
- {
- if (adjust_markers_test)
- abort ();
- mpos = from + amount;
- }
- }
- if (mpos > from && mpos <= to)
- mpos += amount;
- m->bufpos = mpos;
- marker = m->chain;
- }
-#endif
-}
-\f
/* Adjust all markers for a deletion
whose range in bytes is FROM_BYTE to TO_BYTE.
The range in charpos is FROM to TO.
static void
adjust_point (EMACS_INT nchars, EMACS_INT nbytes)
{
- BUF_PT (current_buffer) += nchars;
- BUF_PT_BYTE (current_buffer) += nbytes;
-
+ SET_BUF_PT_BOTH (current_buffer, PT + nchars, PT_BYTE + nbytes);
/* In a single-byte buffer, the two positions must be equal. */
eassert (PT_BYTE >= PT && PT_BYTE - PT <= ZV_BYTE - ZV);
}
\f
/* Make the gap NBYTES_ADDED bytes longer. */
-void
+static void
make_gap_larger (EMACS_INT nbytes_added)
{
Lisp_Object tem;
{ EMACS_INT total_size = Z_BYTE - BEG_BYTE + GAP_SIZE + nbytes_added;
if (total_size < 0
/* Don't allow a buffer size that won't fit in a Lisp integer. */
- || total_size != XINT (make_number (total_size))
- /* Don't allow a buffer size that won't fit in an int
- even if it will fit in a Lisp integer.
- That won't work because so many places still use `int'. */
- || total_size != (EMACS_INT) (int) total_size)
+ || total_size != XINT (make_number (total_size)))
error ("Buffer exceeds maximum size");
}
Vinhibit_quit = tem;
}
+#if defined USE_MMAP_FOR_BUFFERS || defined REL_ALLOC || defined DOUG_LEA_MALLOC
/* Make the gap NBYTES_REMOVED bytes shorter. */
-void
+static void
make_gap_smaller (EMACS_INT nbytes_removed)
{
Lisp_Object tem;
Vinhibit_quit = tem;
}
+#endif /* USE_MMAP_FOR_BUFFERS || REL_ALLOC || DOUG_LEA_MALLOC */
+
void
make_gap (EMACS_INT nbytes_added)
{
{
EMACS_INT nchars = 0;
EMACS_INT bytes_left = nbytes;
- Lisp_Object tbl = Qnil;
while (bytes_left > 0)
{
return to_addr - initial_to_addr;
}
}
-
-/* Return the number of bytes it would take
- to convert some single-byte text to multibyte.
- The single-byte text consists of NBYTES bytes at PTR. */
-
-EMACS_INT
-count_size_as_multibyte (const unsigned char *ptr, EMACS_INT nbytes)
-{
- EMACS_INT i;
- EMACS_INT outgoing_nbytes = 0;
-
- for (i = 0; i < nbytes; i++)
- {
- unsigned int c = *ptr++;
-
- if (ASCII_CHAR_P (c))
- outgoing_nbytes++;
- else
- {
- c = BYTE8_TO_CHAR (c);
- outgoing_nbytes += CHAR_BYTES (c);
- }
- }
-
- return outgoing_nbytes;
-}
\f
/* Insert a string of specified length before point.
This function judges multibyteness based on
PREV_TEXT nil means the new text was just inserted. */
-void
+static void
adjust_after_replace (EMACS_INT from, EMACS_INT from_byte,
Lisp_Object prev_text, EMACS_INT len, EMACS_INT len_byte)
{
CHARS_MODIFF = MODIFF;
}
-/* Like adjust_after_replace, but doesn't require PREV_TEXT.
- This is for use when undo is not enabled in the current buffer. */
-
-void
-adjust_after_replace_noundo (EMACS_INT from, EMACS_INT from_byte,
- EMACS_INT nchars_del, EMACS_INT nbytes_del,
- EMACS_INT len, EMACS_INT len_byte)
-{
-#ifdef BYTE_COMBINING_DEBUG
- if (count_combining_before (GPT_ADDR, len_byte, from, from_byte)
- || count_combining_after (GPT_ADDR, len_byte, from, from_byte))
- abort ();
-#endif
-
- /* Update various buffer positions for the new text. */
- GAP_SIZE -= len_byte;
- ZV += len; Z+= len;
- ZV_BYTE += len_byte; Z_BYTE += len_byte;
- GPT += len; GPT_BYTE += len_byte;
- if (GAP_SIZE > 0) *(GPT_ADDR) = 0; /* Put an anchor. */
-
- if (nchars_del > 0)
- adjust_markers_for_replace (from, from_byte, nchars_del, nbytes_del,
- len, len_byte);
- else
- adjust_markers_for_insert (from, from_byte,
- from + len, from_byte + len_byte, 0);
-
- if (len > nchars_del)
- adjust_overlays_for_insert (from, len - nchars_del);
- else if (len < nchars_del)
- adjust_overlays_for_delete (from, nchars_del - len);
- if (BUF_INTERVALS (current_buffer) != 0)
- {
- offset_intervals (current_buffer, from, len - nchars_del);
- }
-
- if (from < PT)
- adjust_point (len - nchars_del, len_byte - nbytes_del);
-
- /* As byte combining will decrease Z, we must check this again. */
- if (Z - GPT < END_UNCHANGED)
- END_UNCHANGED = Z - GPT;
-
- CHECK_MARKERS ();
-
- if (len == 0)
- evaporate_overlays (from);
- MODIFF++;
- CHARS_MODIFF = MODIFF;
-}
-
/* Record undo information, adjust markers and position keepers for an
insertion of a text from FROM (FROM_BYTE) to TO (TO_BYTE). The
text already exists in the current buffer but character length (TO
VARIABLE is the variable to maybe set to nil.
NO-ERROR-FLAG is nil if there was an error,
anything else meaning no error (so this function does nothing). */
-Lisp_Object
+static Lisp_Object
reset_var_on_error (Lisp_Object val)
{
if (NILP (XCDR (val)))
If PRESERVE_PTR is nonzero, we relocate *PRESERVE_PTR
by holding its value temporarily in a marker. */
-void
+static void
signal_before_change (EMACS_INT start_int, EMACS_INT end_int,
EMACS_INT *preserve_ptr)
{
specbind (Qinhibit_modification_hooks, Qt);
- /* If buffer is unmodified, run a special hook for that case. */
+ /* If buffer is unmodified, run a special hook for that case. The
+ check for Vfirst_change_hook is just a minor optimization. */
if (SAVE_MODIFF >= MODIFF
- && !NILP (Vfirst_change_hook)
- && !NILP (Vrun_hooks))
+ && !NILP (Vfirst_change_hook))
{
PRESERVE_VALUE;
PRESERVE_START_END;
- call1 (Vrun_hooks, Qfirst_change_hook);
+ Frun_hooks (1, &Qfirst_change_hook);
}
/* Now run the before-change-functions if any. */
unbind_to (count, Qnil);
}
-Lisp_Object
+static Lisp_Object
Fcombine_after_change_execute_1 (Lisp_Object val)
{
Vcombine_after_change_calls = val;
HCoop / bpt / emacs.git / blobdiff