@echo off\r
rem ----------------------------------------------------------------------\r
rem Configuration script for MSDOS\r
-rem Copyright (C) 1994 Free Software Foundation, Inc.\r
+rem Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003\r
+rem 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.\r
\r
rem This file is part of GNU Emacs.\r
\r
-rem GNU Emacs is free software; you can redistribute it and/or modify\r
+rem GNU Emacs is free software: you can redistribute it and/or modify\r
rem it under the terms of the GNU General Public License as published by\r
-rem the Free Software Foundation; either version 2, or (at your option)\r
-rem any later version.\r
+rem the Free Software Foundation, either version 3 of the License, or\r
+rem (at your option) any later version.\r
\r
rem GNU Emacs is distributed in the hope that it will be useful,\r
rem but WITHOUT ANY WARRANTY; without even the implied warranty of\r
rem GNU General Public License for more details.\r
\r
rem You should have received a copy of the GNU General Public License\r
-rem along with GNU Emacs; see the file COPYING. If not, write to the\r
-rem Free Software Foundation, Inc., 59 Temple Place - Suite 330,\r
-rem Boston, MA 02111-1307, USA.\r
+rem along with GNU Emacs. If not, see http://www.gnu.org/licenses/.\r
+\r
rem ----------------------------------------------------------------------\r
rem YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:\r
rem\r
rem + msdos version 3 or better.\r
-rem + djgpp version 1.12maint1 or later (version 2.0 or later recommended).\r
+rem + DJGPP version 2.0 or later (version 2.03 or later recommended).\r
rem + make utility that allows breaking of the 128 chars limit on\r
rem command lines. ndmake (as of version 4.5) won't work due to a\r
-rem line length limit. The make that comes with djgpp does work.\r
-rem + rm and mv (from GNU file utilities).\r
+rem line length limit. The make that comes with DJGPP does work (and is\r
+rem recommended).\r
+rem + rm, mv, and cp (from GNU file utilities).\r
rem + sed (you can use the port that comes with DJGPP).\r
rem\r
-rem You should be able to get all the above utilities from any SimTel\r
-rem repository, e.g. ftp.simtel.net, in the directory\r
-rem "pub/simtelnet/gnu/djgpp/v2gnu". As usual, please use your local\r
-rem mirroring site to reduce trans-Atlantic traffic.\r
+rem You should be able to get all the above utilities from the DJGPP FTP\r
+rem site, ftp.delorie.com, in the directory "pub/djgpp/current/v2gnu".\r
rem ----------------------------------------------------------------------\r
set X11=\r
set nodebug=\r
set djgpp_ver=\r
+set sys_malloc=\r
if "%1" == "" goto usage\r
rem ----------------------------------------------------------------------\r
rem See if their environment is large enough. We need 28 bytes.\r
if "%1" == "--with-x" goto withx\r
if "%1" == "--no-debug" goto nodebug\r
if "%1" == "msdos" goto msdos\r
+if "%1" == "--with-system-malloc" goto sysmalloc\r
:usage\r
-echo Usage: config [--with-x] [--no-debug] msdos\r
+echo Usage: config [--no-debug] [--with-system-malloc] [--with-x] msdos\r
echo [Read the script before you run it.]\r
goto end\r
rem ----------------------------------------------------------------------\r
shift\r
goto again\r
rem ----------------------------------------------------------------------\r
+:sysmalloc\r
+set sys_malloc=Y\r
+shift\r
+goto again\r
+rem ----------------------------------------------------------------------\r
:msdos\r
Echo Checking whether 'sed' is available...\r
sed -e "w junk.$$$" <Nul\r
Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!\r
Goto End\r
:go32Ok\r
-set djgpp_ver=1\r
-If ErrorLevel 20 set djgpp_ver=2\r
+set djgpp_ver=2\r
+If Not ErrorLevel 20 Echo To build 'Emacs' you need DJGPP v2.0 or later!\r
+If Not ErrorLevel 20 Goto End\r
rm -f junk.c junk junk.exe\r
+rem DJECHO is used by the top-level Makefile in the v2.x build\r
+Echo Checking whether 'djecho' is available...\r
+redir -o Nul -eo djecho -o junk.$$$ foo\r
+If Exist junk.$$$ Goto djechoOk\r
+Echo To build 'Emacs' you need the 'djecho.exe' program!\r
+Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.\r
+Echo Versions of DJGPP before 2.02 called this program 'echo.exe'.\r
+Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,\r
+Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.\r
+Echo Then run CONFIG.BAT again with the same arguments you did now.\r
+Goto End\r
+:djechoOk\r
+rm -f junk.$$$\r
Echo Configuring for DJGPP Version %DJGPP_VER% ...\r
Rem ----------------------------------------------------------------------\r
Echo Configuring the source directory...\r
if "%X11%" == "" goto src4\r
sed -f ../msdos/sed2x.inp <config.in >config.tmp\r
:src4\r
-sed -f ../msdos/sed2.inp <config.tmp >config.h2\r
+sed -f ../msdos/sed2v2.inp <config.tmp >config.h2\r
+Rem See if DECL_ALIGN can be supported with this GCC\r
+rm -f junk.c junk.o junk junk.exe\r
+echo struct { int i; char *p; } __attribute__((__aligned__(8))) foo; >junk.c\r
+rem Two percent signs because it is a special character for COMMAND.COM/CMD\r
+rem Filter thru Sed because "&" is special for CMD.EXE\r
+echo int main(void) { return (unsigned long)"&"foo %% 8; } | sed "s/.&./\&/" >>junk.c\r
+gcc -o junk junk.c\r
+if not exist junk.exe coff2exe junk\r
+junk\r
+If Not ErrorLevel 1 Goto alignOk\r
+Echo WARNING: Your GCC does not support 8-byte aligned variables.\r
+Echo WARNING: Therefore Emacs cannot support buffers larger than 128MB.\r
+rem The following line disables DECL_ALIGN which in turn disables USE_LSB_TAG\r
+rem For details see lisp.h where it defines USE_LSB_TAG\r
+echo #define NO_DECL_ALIGN >>config.h2\r
+:alignOk\r
+Rem See if they requested a SYSTEM_MALLOC build\r
+if "%sys_malloc%" == "" Goto cfgDone\r
+rm -f config.tmp\r
+ren config.h2 config.tmp\r
+sed -f ../msdos/sedalloc.inp <config.tmp >config.h2\r
+\r
+:cfgDone\r
+rm -f junk.c junk junk.exe\r
update config.h2 config.h >nul\r
rm -f config.tmp config.h2\r
\r
if exist dir.h ren dir.h vmsdir.h\r
\r
rem Create "makefile" from "makefile.in".\r
-rm -f Makefile junk.c\r
-sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c\r
-If "%DJGPP_VER%" == "1" Goto mfV1\r
-gcc -E junk.c | sed -f ../msdos/sed1v2.inp >Makefile\r
-goto mfDone\r
-:mfV1\r
-gcc -E junk.c | sed -f ../msdos/sed1.inp >Makefile\r
-:mfDone\r
-rm -f junk.c\r
+rm -f Makefile makefile.tmp\r
+copy Makefile.in+deps.mk makefile.tmp\r
+sed -f ../msdos/sed1v2.inp <makefile.tmp >Makefile\r
+rm -f makefile.tmp\r
\r
if "%X11%" == "" goto src5\r
mv Makefile makefile.tmp\r
rm -f makefile.tmp\r
:src5\r
\r
+if "%sys_malloc%" == "" goto src5a\r
+sed -e "/^GMALLOC_OBJ *=/s/gmalloc.o//" <Makefile >makefile.tmp\r
+sed -e "/^VMLIMIT_OBJ *=/s/vm-limit.o//" <makefile.tmp >makefile.tmp2\r
+sed -e "/^RALLOC_OBJ *=/s/ralloc.o//" <makefile.tmp2 >Makefile\r
+rm -f makefile.tmp makefile.tmp2\r
+:src5a\r
+\r
if "%nodebug%" == "" goto src6\r
-sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile\r
rm -f makefile.tmp\r
:src6\r
rem ----------------------------------------------------------------------\r
Echo Configuring the library source directory...\r
cd lib-src\r
-rem Create "makefile" from "makefile.in".\r
-sed -e "1,/cpp stuff/s@^# .*$@@" <Makefile.in >junk.c\r
-gcc -E -I. -I../src junk.c | sed -e "s/^ / /" -e "/^#/d" -e "/^[ \f]*$/d" >makefile.new\r
-If "%DJGPP_VER%" == "2" goto libsrc-v2\r
-sed -f ../msdos/sed3.inp <makefile.new >Makefile\r
-Goto libsrc2\r
-:libsrc-v2\r
-sed -f ../msdos/sed3v2.inp <makefile.new >Makefile\r
-:libsrc2\r
-rm -f makefile.new junk.c\r
+sed -f ../msdos/sed3v2.inp <Makefile.in >Makefile\r
+if "%X11%" == "" goto libsrc2a\r
+mv Makefile makefile.tmp\r
+sed -f ../msdos/sed3x.inp <makefile.tmp >Makefile\r
+rm -f makefile.tmp\r
+:libsrc2a\r
if "%nodebug%" == "" goto libsrc3\r
-sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile\r
rm -f makefile.tmp\r
:libsrc3\r
cd oldxmenu\r
sed -f ../msdos/sed5x.inp <Makefile.in >Makefile\r
if "%nodebug%" == "" goto oldx2\r
-sed -e "/^CFLAGS *=/s/ *-g//" <Makefile >makefile.tmp\r
+sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp\r
mv -f makefile.tmp Makefile\r
:oldx2\r
cd ..\r
:oldx1\r
rem ----------------------------------------------------------------------\r
-Echo Configuring the manual directory...\r
-cd man\r
-sed -f ../msdos/sed6.inp < Makefile.in > Makefile\r
+Echo Configuring the doc directory, expect one "File not found" message...\r
+cd doc\r
+Rem The two variants for lispintro below is for when the shell\r
+Rem supports long file names but DJGPP does not\r
+for %%d in (emacs lispref lispintro lispintr misc) do sed -f ../msdos/sed6.inp < %%d\Makefile.in > %%d\Makefile\r
+cd ..\r
+rem ----------------------------------------------------------------------\r
+Echo Configuring the lisp directory...\r
+cd lisp\r
+sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile\r
cd ..\r
rem ----------------------------------------------------------------------\r
If not Exist leim\quail\latin-pre.el goto maindir\r
rem ----------------------------------------------------------------------\r
:maindir\r
Echo Configuring the main directory...\r
-If "%DJGPP_VER%" == "1" goto mainv1\r
+If Exist .dir-locals.el update .dir-locals.el _dir-locals.el\r
+If Exist src\.dbxinit update src/.dbxinit src/_dbxinit\r
Echo Looking for the GDB init file...\r
-If not Exist src\_gdbinit If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
+If Exist src\.gdbinit update src/.gdbinit src/_gdbinit\r
If Exist src\_gdbinit goto gdbinitOk\r
Echo ERROR:\r
Echo I cannot find the GDB init file. It was called ".gdbinit" in\r
:gdbinitOk\r
Echo Looking for the GDB init file...found\r
copy msdos\mainmake.v2 Makefile >nul\r
-:mainv1\r
-If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul\r
rem ----------------------------------------------------------------------\r
goto End\r
:SmallEnv\r
set X11=\r
set nodebug=\r
set djgpp_ver=\r
+set sys_malloc=\r
+\r
+goto skipArchTag\r
+ arch-tag: 2d2fed23-4dc6-4006-a2e4-49daf0031f33\r
+:skipArchTag\r
HCoop / bpt / emacs.git / blobdiff