# ==================== Where To Install Things ====================
+# Location to install Emacs.app under GNUstep / Mac OS X.
+# Later values may use these.
+ns_appbindir=@ns_appbindir@
+ns_appresdir=@ns_appresdir@
+# Either yes or no depending on whether this is a relocatable Emacs.app.
+ns_self_contained=@ns_self_contained@
+
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
-# rather than directly by users, and other architecture-dependent
-# data. ${archlibdir} is a subdirectory of this.
+# rather than directly by users (and other architecture-dependent
+# data, although Emacs does not have any). The executables
+# are actually installed in ${archlibdir}, which is (normally)
+# a subdirectory of this.
libexecdir=@libexecdir@
# Where to install Emacs's man pages.
# Where to find the application default.
x_default_search_path=@x_default_search_path@
-# Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa
-ns_appbindir=@ns_appbindir@
-ns_appresdir=@ns_appresdir@
-
# Where the etc/emacs.desktop file is to be installed.
desktopdir=$(datarootdir)/applications
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
-## On AIX, use tar xBf.
-## On Xenix, use tar xpf.
+.PHONY: install
-.PHONY: install mkdir
-
-## We delete each directory in ${COPYDESTS} before we copy into it;
-## that way, we can reinstall over directories that have been put in
-## place with their files read-only (perhaps because they are checked
-## into RCS). In order to make this safe, we make sure that the
-## source exists and is distinct from the destination.
-### We do install-arch-indep first because
-### the executable needs the Lisp files and DOC file to work properly.
-install: all install-arch-indep install-arch-dep install-leim blessmail
+install: all install-arch-indep install-arch-dep blessmail
@true
+## Ensure that $subdir contains a subdirs.el file.
+## Here and elsewhere, we set the umask so that any created files are
+## world-readable.
+## TODO it might be good to warn about non-standard permissions of
+## pre-existing directories, but that does not seem easy.
+write_subdir=if [ -f $${subdir}/subdirs.el ]; \
+ then true; \
+ else \
+ umask 022; \
+ ${MKDIR_P} $${subdir}; \
+ (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
+ echo " (normal-top-level-add-subdirs-to-load-path))") \
+ > $${subdir}/subdirs.el; \
+ fi
+
### Install the executables that were compiled specifically for this machine.
-### It would be nice to do something for a parallel make
-### to ensure that install-arch-indep finishes before this starts.
-### (TODO Why would it be nice? Why not just make this depend on
-### install-arch-indep then?)
-install-arch-dep: mkdir
+### We do install-arch-indep first because the executable needs the
+### Lisp files and DOC file to work properly.
+install-arch-dep: install-arch-indep
+ umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
libexecdir=${libexecdir} archlibdir=${archlibdir} \
INSTALL_STRIP=${INSTALL_STRIP})
- ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
- -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
- rm -f $(DESTDIR)${bindir}/$(EMACS)
- -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
- if test "${ns_appresdir}" != ""; then \
- ( cd ${ns_appresdir} ; \
- if test -d share/emacs ; then \
- for dir in share/emacs/${version}/*; do \
- rm -fr `basename "$$dir"`; mv "$$dir" . ; \
- done ; \
- fi ; \
- if test -d share/info ; then rm -fr info; mv share/info . ; fi ; \
- rm -fr share ) ; \
- ( if cd ${ns_appbindir}/libexec ; then \
- mv -f emacs/${version}/${configuration}/* . ; rm -fr emacs ; \
- rm -f ../bin/emacs ../bin/$(EMACSFULL) ; \
- fi ) ; \
- else true ; fi
-
-## FIXME NS self-contained: rather than installing emacs and
-## EMACSFULL, then deleting them, obviously it would be better to not
-## install them in the first place.
+ if test "${ns_self_contained}" = "no"; then \
+ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
+ chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \
+ rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
+ ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS) || true ; \
+ else \
+ subdir=${ns_appresdir}/site-lisp; \
+ ${write_subdir} || exit 1; \
+ rm -rf ${ns_appresdir}/share; \
+ fi
+
+## In the share directory, we are deleting:
+## applications (with emacs.desktop)
+## emacs (basically empty)
+## icons (duplicates etc/images/icons/hicolor)
+## man (maybe we should be installing this one, like info)
+
+## This is install-etc for everything except self-contained-ns builds.
+## For them, it is empty.
+INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
## Needs to be the user running install, so configure can't set it.
## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
## (Note "otherwise" is inaccurate since 2009-08-23.)
-## If people complain about the h flag in tar command, take that out.
-## That flag is also used in leim/Makefile.in
-
## Note that the Makefiles in the etc directory are potentially useful
## in an installed Emacs, so should not be excluded.
-install-arch-indep: mkdir info install-etc
- -set ${COPYDESTS} ; \
- unset CDPATH; \
- for dir in ${COPYDIR} ; do \
- if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
- rm -rf $$1 ; \
- fi ; \
- shift ; \
- done
+## We delete each directory in ${COPYDESTS} before we copy into it;
+## that way, we can reinstall over directories that have been put in
+## place with their files read-only (perhaps because they are checked
+## into RCS). In order to make this safe, we make sure that the
+## source exists and is distinct from the destination.
+
+## I'm not sure creating locallisppath here serves any useful purpose.
+## If it has the default value, then the later write_subdir commands
+## will ensure all these components exist.
+## This will only do something if locallisppath has a non-standard value.
+## Is it really Emacs's job to create those directories?
+## Should we also be ensuring they contain subdirs.el files?
+## It would be easy to do, just use write_subdir.
+install-arch-indep: info install-leim ${INSTALL_ARCH_INDEP_EXTRA}
+ umask 022 ; \
+ $(MKDIR_P) $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'`
-set ${COPYDESTS} ; \
- mkdir ${COPYDESTS} ; \
- chmod ugo+rx ${COPYDESTS} ; \
unset CDPATH; \
$(set_installuser); \
for dir in ${COPYDIR} ; do \
+ [ -d $${dir} ] || exit 1 ; \
dest=$$1 ; shift ; \
- [ -d $${dir} ] \
- && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
- && (echo "Copying $${dir} to $${dest}..." ; \
- (cd $${dir}; tar -chf - . ) \
- | (cd $${dest}; umask 022; \
- tar -xvf - && cat > /dev/null) || exit 1; \
- find $${dest} -exec chown $${installuser} {} ';' ;\
- for subdir in `find $${dest} -type d -print` ; do \
- chmod a+rx $${subdir} ; \
- rm -f $${subdir}/.gitignore ; \
- rm -f $${subdir}/.arch-inventory ; \
- rm -f $${subdir}/.DS_Store ; \
- rm -f $${subdir}/\#* ; \
- rm -f $${subdir}/.\#* ; \
- rm -f $${subdir}/*~ ; \
- rm -f $${subdir}/*.orig ; \
- [ "$${dir}" != "${srcdir}/etc" ] && \
- rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
- rm -f $${subdir}/ChangeLog* ; \
- done) ; \
+ [ -d $${dest} ] && \
+ [ `(cd $${dest} && /bin/pwd)` = `(cd $${dir} && /bin/pwd)` ] && \
+ continue ; \
+ rm -rf $${dest} ; \
+ umask 022; ${MKDIR_P} $${dest} ; \
+ (echo "Copying $${dir} to $${dest}..." ; \
+ (cd $${dir}; tar -chf - . ) \
+ | (cd $${dest}; umask 022; \
+ tar -xvf - && cat > /dev/null) || exit 1; \
+ find $${dest} -exec chown $${installuser} {} ';' ;\
+ for subdir in `find $${dest} -type d -print` ; do \
+ chmod a+rx $${subdir} ; \
+ rm -f $${subdir}/.gitignore ; \
+ rm -f $${subdir}/.arch-inventory ; \
+ rm -f $${subdir}/.DS_Store ; \
+ rm -f $${subdir}/\#* ; \
+ rm -f $${subdir}/.\#* ; \
+ rm -f $${subdir}/*~ ; \
+ rm -f $${subdir}/*.orig ; \
+ [ "$${dir}" != "${srcdir}/etc" ] && \
+ rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
+ rm -f $${subdir}/ChangeLog* ; \
+ done) ; \
done
-rm -f $(DESTDIR)${lispdir}/subdirs.el
$(srcdir)/update-subdirs $(DESTDIR)${lispdir}
- if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
- then true; \
- else \
- (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
- echo " (normal-top-level-add-subdirs-to-load-path))") \
- > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
- fi
- chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
- -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
- then true; \
- else \
- (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
- echo " (normal-top-level-add-subdirs-to-load-path))") \
- > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
- fi
- -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
+ subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
+ ${write_subdir}
+ subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
+ ${write_subdir} || true
-unset CDPATH; \
+ umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
then \
fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
done) \
else true; fi
+ umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
-unset CDPATH; \
thisdir=`/bin/pwd`; \
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
if [ -f dir ]; then true; \
else \
(cd $${thisdir}; \
- ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
- chmod a+r $(DESTDIR)${infodir}/dir); \
+ ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
fi; \
info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \
cd ${srcdir}/info ; \
for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
- chmod a+r $(DESTDIR)${infodir}/$$f; \
if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
rm -f $(DESTDIR)${infodir}/$$f.gz; \
${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
done); \
else true; fi
-chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
+ umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
thisdir=`/bin/pwd`; \
cd ${mansrcdir}; \
for page in *.1; do \
(cd $${thisdir}; \
${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \
- chmod a+r $(DESTDIR)${man1dir}/$${page}; \
if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
rm -f $(DESTDIR)${man1dir}/$${page}.gz; \
${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \
done
## Install those items from etc/ that need to end up elsewhere.
-install-etc: mkdir
+install-etc:
+ umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \
$(DESTDIR)${desktopdir}/emacs.desktop
- for icon in $(iconsrcdir)/*/*/apps/*.* \
- $(iconsrcdir)/*/*/mimetypes/*.*; do \
- if [ -r $${icon} ]; then \
- iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \
- ${INSTALL_DATA} $${icon} $${iicon} ; \
- fi ; \
+ thisdir=`/bin/pwd`; \
+ cd ${iconsrcdir} || exit 1; umask 022 ; \
+ for dir in */*/apps */*/mimetypes; do \
+ [ -d $${dir} ] || continue ; \
+ ( cd $${thisdir}; ${MKDIR_P} ${icondir}/$${dir} ) ; \
+ for icon in $${dir}/*.*; do \
+ [ -r $${icon} ] || continue ; \
+ ( cd $${thisdir}; \
+ ${INSTALL_DATA} ${iconsrcdir}/$${icon} ${icondir}/$${icon} ) \
+ || exit 1; \
+ done ; \
done
### Install LEIM files. Although they are machine-independent, we
### have separate target here instead of including it in
### `install-arch-indep'. People who extracted LEIM files after they
### installed Emacs itself can install only LEIM files by this target.
-install-leim: leim/Makefile mkdir
+install-leim: leim/Makefile
cd leim && $(MAKE) $(MFLAGS) install
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
$(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
-### Build all the directories we're going to install Emacs in.
-### We set the umask so that any created directories are world-readable.
-### FIXME it would be good to warn about non-standard permissions of
-### pre-existing directories, but that does not seem easy.
-mkdir: FRC
- icondirs= ; \
- for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \
- if [ -d $${dir} ]; then \
- icondirs="$${icondirs} $${dir}" ; \
- fi ; \
- done ; \
- icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \
- umask 022 ; \
- $(MKDIR_P) $(DESTDIR)${datadir} ${COPYDESTS} \
- $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
- $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
- $(DESTDIR)${datadir}/emacs/site-lisp \
- $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
- $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \
- $(DESTDIR)${desktopdir} $${icondirs}
-
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would create).
###