X-Git-Url: http://git.hcoop.net/ntk/apt.git/blobdiff_plain/060a7b746c87d4717222df5bb14d85b756f39208..5abbf5bbb5ee8717f89cac6ef409c4cec79259f6:/doc/sources.list.5.xml diff --git a/doc/sources.list.5.xml b/doc/sources.list.5.xml index 6029a745..da4f571b 100644 --- a/doc/sources.list.5.xml +++ b/doc/sources.list.5.xml @@ -1,13 +1,9 @@ - -%aptent; - - -%aptverbatiment; - + %aptent; + %aptverbatiment; + %aptvendor; ]> @@ -18,7 +14,7 @@ &apt-email; &apt-product; - 29 February 2004 + 2014-01-18T00:00:00Z @@ -30,24 +26,24 @@ sources.list - Package resource list for APT + List of configured APT data sources Description - The package resource list is used to locate archives of the package - distribution system in use on the system. At this time, this manual page - documents only the packaging system used by the Debian GNU/Linux system. - This control file is /etc/apt/sources.list. - - The source list is designed to support any number of active sources and a - variety of source media. The file lists one source per line, with the - most preferred source listed first. The format of each line is: - type uri args The first item, type - determines the format for args. uri is - a Universal Resource Identifier - (URI), which is a superset of the more specific and well-known Universal - Resource Locator, or URL. The rest of the line can be marked as a comment - by using a #. + + The source list /etc/apt/sources.list is designed to support + any number of active sources and a variety of source media. The file lists one + source per line, with the most preferred source listed first. The information available + from the configured sources is acquired by apt-get update + (or by an equivalent command from another APT front-end). + + + Each line specifying a source starts with type (e.g. deb-src) + followed by options and arguments for this type. + Individual entries cannot be continued onto a following line. Empty lines + are ignored, and a # character anywhere on a line marks + the remainder of that line as a comment. + sources.list.d @@ -57,55 +53,99 @@ File names need to end with .list and may only contain letters (a-z and A-Z), digits (0-9), underscore (_), hyphen (-) and period (.) characters. - Otherwise they will be silently ignored. + Otherwise APT will print a notice that it has ignored a file, unless that + file matches a pattern in the Dir::Ignore-Files-Silently + configuration list - in which case it will be silently ignored. The deb and deb-src types - The deb type describes a typical two-level Debian - archive, distribution/component. Typically, - distribution is generally one of - stable unstable or - testing while component is one of main - contrib non-free or - non-us. The - deb-src type describes a debian distribution's source + The deb type references a typical two-level Debian + archive, distribution/component. The + distribution is generally an archive name like + stable or testing or a codename like + &stable-codename; or &testing-codename; + while component is one of main, contrib or + non-free. The + deb-src type references a Debian distribution's source code in the same form as the deb type. A deb-src line is required to fetch source indexes. - The format for a sources.list entry using the deb and deb-src types is: - deb uri distribution [component1] [component2] [...] + deb [ options ] uri suite [component1] [component2] [...] + + Alternatively a rfc822 style format is also supported: + + Types: deb deb-src + URIs: http://example.com + Suites: stable testing + Sections: component1 component2 + Description: short + long long long + [option1]: [option1-value] + + Types: deb + URIs: http://another.example.com + Suites: experimental + Sections: component1 component2 + Enabled: no + Description: short + long long long + [option1]: [option1-value] + + The URI for the deb type must specify the base of the Debian distribution, from which APT will find the information it needs. - distribution can specify an exact path, in which case the - components must be omitted and distribution must end with - a slash (/). This is useful for when the case only a particular sub-section of the - archive denoted by the URI is of interest. - If distribution does not specify an exact path, at least + suite can specify an exact path, in which case the + components must be omitted and suite must end with + a slash (/). This is useful for the case when only a + particular sub-section of the archive denoted by the URI is of interest. + If suite does not specify an exact path, at least one component must be present. - distribution may also contain a variable, + suite may also contain a variable, $(ARCH) - which expands to the Debian architecture (i386, m68k, powerpc, ...) - used on the system. This permits architecture-independent + which expands to the Debian architecture (such as amd64 or + armel) used on the system. This permits architecture-independent sources.list files to be used. In general this is only of interest when specifying an exact path, APT will automatically generate a URI with the current architecture otherwise. - Since only one distribution can be specified per line it may be necessary - to have multiple lines for the same URI, if a subset of all available - distributions or components at that location is desired. - APT will sort the URI list after it has generated a complete set - internally, and will collapse multiple references to the same Internet - host, for instance, into a single connection, so that it does not - inefficiently establish an FTP connection, close it, do something else, - and then re-establish a connection to that same host. This feature is - useful for accessing busy FTP sites with limits on the number of - simultaneous anonymous users. APT also parallelizes connections to - different hosts to more effectively deal with sites with low bandwidth. + In the traditional style sources.list format since only one + distribution can be specified per line it may be necessary to have + multiple lines for the same URI, if a subset of all available + distributions or components at that location is desired. APT will + sort the URI list after it has generated a complete set internally, + and will collapse multiple references to the same Internet host, + for instance, into a single connection, so that it does not + inefficiently establish an FTP connection, close it, do something + else, and then re-establish a connection to that same host. This + feature is useful for accessing busy FTP sites with limits on the + number of simultaneous anonymous users. APT also parallelizes + connections to different hosts to more effectively deal with sites + with low bandwidth. + + options is always optional and needs to be surrounded by + square brackets. It can consist of multiple settings in the form + setting=value. + Multiple settings are separated by spaces. The following settings are supported by APT + (note however that unsupported settings will be ignored silently): + + arch=arch1,arch2,… + can be used to specify for which architectures information should + be downloaded. If this option is not set all architectures defined by the + APT::Architectures option will be downloaded. + arch+=arch1,arch2,… + and arch-=arch1,arch2,… + which can be used to add/remove architectures from the set which will be downloaded. + trusted=yes can be set to indicate that packages + from this source are always authenticated even if the Release file + is not signed or the signature can't be checked. This disables parts of &apt-secure; + and should therefore only be used in a local and trusted context. trusted=no + is the opposite which handles even correctly authenticated sources as not authenticated. + It is important to list sources in order of preference, with the most preferred source listed first. Typically this will result in sorting @@ -122,24 +162,23 @@ deb http://security.debian.org/ &stable-codename;/updates main contrib non-free URI specification - The currently recognized URI types are cdrom, file, http, ftp, copy, - ssh, rsh. + The currently recognized URI types are: - file + file The file scheme allows an arbitrary directory in the file system to be considered an archive. This is useful for NFS mounts and local mirrors or archives. - cdrom + cdrom - The cdrom scheme allows APT to use a local CDROM drive with media + The cdrom scheme allows APT to use a local CD-ROM drive with media swapping. Use the &apt-cdrom; program to create cdrom entries in the source list. - http + http The http scheme specifies an HTTP server for the archive. If an environment variable http_proxy is set with the format @@ -150,43 +189,41 @@ deb http://security.debian.org/ &stable-codename;/updates main contrib non-free Note that this is an insecure method of authentication. - ftp + ftp The ftp scheme specifies an FTP server for the archive. APT's FTP behavior is highly configurable; for more information see the - &apt-conf; manual page. Please note that a ftp proxy can be specified + &apt-conf; manual page. Please note that an FTP proxy can be specified by using the ftp_proxy environment variable. It is possible - to specify a http proxy (http proxy servers often understand ftp urls) - using this method and ONLY this method. ftp proxies using http specified in + to specify an HTTP proxy (HTTP proxy servers often understand FTP URLs) + using this environment variable and only this + environment variable. Proxies using HTTP specified in the configuration file will be ignored. - copy + copy The copy scheme is identical to the file scheme except that packages are copied into the cache directory instead of used directly at their location. - This is useful for people using a zip disk to copy files around with APT. + This is useful for people using removable media to copy files around with APT. - rshssh + rshssh - The rsh/ssh method invokes rsh/ssh to connect to a remote host - as a given user and access the files. It is a good idea to do prior - arrangements with RSA keys or rhosts. - Access to files on the remote uses standard find and - dd - commands to perform the file transfers from the remote. + The rsh/ssh method invokes RSH/SSH to connect to a remote host and + access the files as a given user. Prior configuration of rhosts or RSA keys + is recommended. The standard find and dd + commands are used to perform the file transfers from the remote host. + - more recognizable URI types + adding more recognizable URI types - APT can be extended with more methods shipped in other optional packages which should - follow the nameing scheme apt-transport-method. - The APT team e.g. maintains also the apt-transport-https package which - provides access methods for https-URIs with features similar to the http method, but other - methods for using e.g. debtorrent are also available, see - apt-transport-debtorrent - 1. + APT can be extended with more methods shipped in other optional packages, which should + follow the naming scheme apt-transport-method. + For instance, the APT team also maintains the package apt-transport-https, + which provides access methods for HTTPS URIs with features similar to the http method. + Methods for using e.g. debtorrent are also available - see &apt-transport-debtorrent;. @@ -204,6 +241,11 @@ deb http://security.debian.org/ &stable-codename;/updates main contrib non-free Source line for the above deb-src file:/home/jason/debian unstable main contrib non-free + The first line gets package information for the architectures in APT::Architectures + while the second always retrieves amd64 and armel. + deb http://ftp.debian.org/debian &stable-codename; main +deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main + Uses HTTP to access the archive at archive.debian.org, and uses only the hamm/main area. deb http://archive.debian.org/debian-archive hamm main @@ -218,18 +260,14 @@ deb http://security.debian.org/ &stable-codename;/updates main contrib non-free a single FTP session will be used for both resource lines. deb ftp://ftp.debian.org/debian unstable contrib - Uses HTTP to access the archive at nonus.debian.org, under the - debian-non-US directory. - deb http://nonus.debian.org/debian-non-US stable/non-US main contrib non-free - - Uses HTTP to access the archive at nonus.debian.org, under the - debian-non-US directory, and uses only files found under - unstable/binary-i386 on i386 machines, - unstable/binary-m68k on m68k, and so - forth for other supported architectures. [Note this example only - illustrates how to use the substitution variable; non-us is no longer - structured like this] - deb http://ftp.de.debian.org/debian-non-US unstable/binary-$(ARCH)/ + Uses HTTP to access the archive at ftp.tlh.debian.org, under the + universe directory, and uses only files found under + unstable/binary-i386 on i386 machines, + unstable/binary-amd64 on amd64, and so + forth for other supported architectures. [Note this example only + illustrates how to use the substitution variable; official debian + archives are not structured like this] + deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/