2012-09-25 |
Alessandro... | Use belt_tooth_distance from configuration.scad |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-25 |
Alessandro... | Use x_rod_distance in x-carriage too |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-25 |
Alessandro... | Move x_rod_distance to configuration.scad |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-25 |
Alessandro... | Add Makefile |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-25 |
Alessandro... | move the frame PDF to frame/6mm too |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-25 |
Alessandro... | Move x-end.scad to inc/ |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-25 |
Alessandro... | Move bearing.scad to inc/ |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-25 |
Alessandro... | Move frame DXF files to frame/6mm |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-13 |
prusajr | Added the alu frame file |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-06 |
prusajr | Fixed y-corner file |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-09-03 |
prusajr | Final refactoring complete |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-08-13 |
prusajr | Structural changes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-13 |
prusajr | Adding first test of compact extruder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-13 |
prusajr | cleaned old files after old corners |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-13 |
prusajr | Refactored corners |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-11 |
vlnofka | More space for extruder motor. |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-08 |
vlnofka | Now motor should not collide with Z plate. |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-07 |
Joachim Glauche | make hole for Z rod bigger to actually fit through |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-07 |
Joachim Glauche | Merge branch 'master' of github.com:josefprusa/Prusa3 |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-07 |
Nathan Zadoks | fixed up Z axis nut trap direction and dimensions |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-06 |
Joachim Glauche | more space for belts origin/belt-holder-fix |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-06 |
Joachim Glauche | more space for belts to slip in |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-04 |
Joachim Glauche | made a y to bottom plate mounting part |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-03 |
Joachim Glauche | fix charset |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-03 |
Joachim Glauche | made linear bearing channels 5mm shorter to end at... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-02 |
Václav 'Ax... | Merge branch 'master' of github.com:josefprusa/Prusa3 |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-07-02 |
Václav 'Ax... | z-axis can be mounted by 2 crews from front or one... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-30 |
Toni Frost | complete-printer - need updates to the config dist |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-30 |
Toni Frost | complete-printer - fix y axis and nuts |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-30 |
Toni Frost | more complete printer updates |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-30 |
Toni Frost | updates for the assembled printer |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-30 |
Toni Frost | typos in includes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-28 |
Václav 'Ax... | Some more configurable dimensions |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-26 |
vlnofka | Modified Greg's Wade extruder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-26 |
Václav 'Ax... | Fixed typo in filename |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-26 |
Václav 'Ax... | Hotswap carriage |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-25 |
Václav 'Ax... | parametric x axis distance creeps in |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-25 |
Václav 'Ax... | fix hardcoded 16 in fillet |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-20 |
Joachim Glauche | remove the second hole, make parts smaller |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-20 |
Joachim Glauche | made the z mounts parametric according to board size |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-19 |
Václav 'Ax... | x-ends: make far wall thicker a bit |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-19 |
Václav 'Ax... | Add readme to output dir |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-19 |
Václav 'Ax... | Merge branch 'fillet' |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-18 |
Kliment Yanev | Finished y axis instructions |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-16 |
Kliment Yanev | Merge branch 'fillet' of github.com:josefprusa/Prusa3... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-16 |
Kliment Yanev | Fix shadow motor orientation in y motor holder, wrote... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-15 |
John Yang | folding clamp holder for mounting Y frame to single... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-14 |
Kliment Yanev | Merge branch 'fillet' of github.com:josefprusa/Prusa3... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-14 |
Kliment Yanev | Move manual to doc folder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-14 |
Václav 'Ax... | more doc moving |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-14 |
Kliment Yanev | Move doc files to doc directory |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-14 |
Kliment Yanev | Initial manual sketch, frame assembly images and source... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-13 |
Václav 'Ax... | Fix z-axis thickness scaling, make it thicker by default |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-13 |
Václav 'Ax... | dump the damn nuttraps |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-13 |
Václav 'Ax... | idler fix |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-12 |
Václav 'Ax... | Thinner bearing-guide walls |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-12 |
Václav 'Ax... | Merge branch 'fillet' of github.com:josefprusa/Prusa3... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-12 |
Václav 'Ax... | Give motor some breathing space |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-12 |
Václav 'Ax... | two screw hole |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-11 |
vlnofka | Better NEMA17 dummy (with flange and shaft) |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-11 |
Václav 'Ax... | linear bearings dont need springy housing |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-11 |
Václav 'Ax... | Even smaller floating bearing, lifted ends for firmer... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-11 |
Václav 'Ax... | Merge branch 'fillet' of github.com:josefprusa/Prusa3... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-10 |
Václav 'Ax... | reduce springiness, clean-up |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-09 |
Václav 'Ax... | Make floating bearing less springy and smaller |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-07 |
vlnofka | Fixed syntax error |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-07 |
John Yang | decreased padding width of lm8uu bearing to have tighte... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-07 |
John Yang | adjusted idler hole to closer match beaing radius,... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-07 |
Nathan Zadoks | make output dir automatically |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-07 |
Václav 'Ax... | Address #3 |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-07 |
John Yang | added in the bearing_type variable with the default... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-07 |
John Yang | make idler mount hole use config size for idler instead... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-07 |
John Yang | lme8uu and lm8uu dimensions inverted fo bearing calcula... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-06 |
Václav 'Ax... | bearing fixes... hopefully it has all correct dimension... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-06 |
Václav 'Ax... | Add credit to fillet() author |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-06 |
Václav 'Ax... | linear bearing has minimum size now, fixed fillet. |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-05 |
Václav 'Ax... | now we have Makefile, ho ho ho! |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-05 |
Václav 'Ax... | Fix bearing sizes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-04 |
Václav 'Ax... | heptagonal nema17 holes, yay! |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-04 |
Václav 'Ax... | Shorter screw for x-end stepper |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-04 |
Václav 'Ax... | ignore .gcode files too |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-04 |
Václav 'Ax... | give nema17 screw longer head shaft |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-04 |
Václav 'Ax... | Header change, minor fiddling with bushings, x-carriage... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-03 |
Václav 'Ax... | size clenaup too |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-03 |
Václav 'Ax... | cleanup: remove size argument name from cubes |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-03 |
Václav 'Ax... | tree-point mount of x motor |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-03 |
Václav 'Ax... | purge redundant <inc/functions.scad> |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-03 |
Václav 'Ax... | nushing.scad rework. Y and Z axis change as in configur... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-02 |
Václav 'Ax... | LARGE reformat (tabs to 4 spaces everywhere, cleaning... |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | Bushing.scad rewrite, part 1 |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | More eyecandy |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | Extract printer preview, add colors |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | Added desired layer width and WoT to README |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | Y motor holder has proper shadow stepper now |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | rename nema->nema17, put shadow bearing on idlerholder |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | more parametric idler stuff |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | Changed idler to bearing-guide from i2, parametrised |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | Start of README |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | LARGE scale cleanup |
commit | commitdiff | tree | snapshot (tar.gz zip) |
2012-06-01 |
Václav 'Ax... | Fix for missing holes in older openscads |
commit | commitdiff | tree | snapshot (tar.gz zip) |
next |