| 2013-02-07 |
Václav 'Ax' Hůla | Idler bearing rework
|
commit | commitdiff | tree |
| 2013-02-04 |
Václav 'Ax' Hůla | Grow Y axis corners up when needed
|
commit | commitdiff | tree |
| 2013-02-04 |
Václav 'Ax' Hůla | Longer bearings are held on both sides
|
commit | commitdiff | tree |
| 2013-02-04 |
Václav 'Ax' Hůla | Better configuration of idler bearings
|
commit | commitdiff | tree |
| 2013-02-01 |
Václav 'Ax' Hůla | Move holes for Z axis single box (joaz)
|
commit | commitdiff | tree |
| 2013-02-01 |
Václav 'Ax' Hůla | Fix for error in generated stl
|
commit | commitdiff | tree |
| 2013-01-31 |
Václav 'Ax' Hůla | Update note for i_want_to_use_single_plate_dxf_and_make_my_z...
|
commit | commitdiff | tree |
| 2013-01-31 |
Václav 'Ax' Hůla | Change default for Z screw position when i_am_box = 0
|
commit | commitdiff | tree |
| 2013-01-30 |
Václav 'Ax' Hůla | Move smooth rod to the board for thicker smooth rods
|
commit | commitdiff | tree |
| 2013-01-30 |
Václav 'Ax' Hůla | fixes or single plate, z bottom is higher now
|
commit | commitdiff | tree |
| 2013-01-30 |
Václav 'Ax' Hůla | calculate deltas for thick bearings
|
commit | commitdiff | tree |
| 2013-01-30 |
Václav 'Ax' Hůla | lm10luu length fix
|
commit | commitdiff | tree |
| 2013-01-30 |
Václav 'Ax' Hůla | foot moves when bearing holder enlarges, print only...
|
commit | commitdiff | tree |
| 2013-01-27 |
Václav 'Ax' Hůla | Increasing strength of z axis parts
|
commit | commitdiff | tree |
| 2013-01-27 |
Václav 'Ax' Hůla | New bushing changes (unfinished)
|
commit | commitdiff | tree |
| 2013-01-27 |
Václav 'Ax' Hůla | Fix default i_am_box
|
commit | commitdiff | tree |
| 2013-01-26 |
Václav 'Ax' Hůla | box mounts updated to variable long threaded rod
|
commit | commitdiff | tree |
| 2013-01-26 |
Václav 'Ax' Hůla | y corners adapted to new bushing config
|
commit | commitdiff | tree |
| 2013-01-25 |
Václav 'Ax' Hůla | Remove #
|
commit | commitdiff | tree |
| 2013-01-24 |
Václav 'Ax' Hůla | box config update
|
commit | commitdiff | tree |
| 2013-01-24 |
Václav 'Ax' Hůla | Merge branch 'master' of github.com:josefprusa/Prusa3...
|
commit | commitdiff | tree |
| 2013-01-24 |
Václav 'Ax' Hůla | z axis rework, inspired by single-plate Z
|
commit | commitdiff | tree |
| 2013-01-24 |
Václav 'Ax' Hůla | Simplify x end nut trap
|
commit | commitdiff | tree |
| 2013-01-20 |
Václav 'Ax' Hůla | away with the z constraint, its not doing any good
|
commit | commitdiff | tree |
| 2013-01-20 |
Václav 'Ax' Hůla | Move bushing config
|
commit | commitdiff | tree |
| 2013-01-20 |
Václav 'Ax' Hůla | Merge remote-tracking branch 'upstream/master' into...
|
commit | commitdiff | tree |
| 2013-01-20 |
Václav 'Ax' Hůla | Config file with different bearings and bushings
|
commit | commitdiff | tree |
| 2013-01-15 |
Václav 'Ax' Hůla | remove #
|
commit | commitdiff | tree |
| 2013-01-06 |
Václav 'Ax' Hůla | linear_preclean function to make sure there is empty...
|
commit | commitdiff | tree |
| 2013-01-03 |
Václav 'Ax' Hůla | update x-end to new bushing.scad - still needs more...
|
commit | commitdiff | tree |
| 2013-01-03 |
Václav 'Ax' Hůla | Update x-carriage to new bushing.scad
|
commit | commitdiff | tree |
| 2013-01-03 |
Václav 'Ax' Hůla | bushing rewrite
|
commit | commitdiff | tree |
| 2012-12-20 |
Václav 'Ax' Hůla | Let the board_thickness affect y-axis-corner height
|
commit | commitdiff | tree |
| 2012-12-20 |
Václav 'Ax' Hůla | Merge branch 'master' of github.com:josefprusa/Prusa3
|
commit | commitdiff | tree |
| 2012-12-14 |
Václav 'Ax' Hůla | Z constraining bearing touches
|
commit | commitdiff | tree |
| 2012-12-08 |
Václav 'Ax' Hůla | Option to disable fillets
|
commit | commitdiff | tree |
| 2012-12-08 |
Václav 'Ax' Hůla | Merge remote-tracking branch 'upstream/master'
|
commit | commitdiff | tree |
| 2012-12-08 |
Václav 'Ax' Hůla | use M10 threaded rods in Y direction
|
commit | commitdiff | tree |
| 2012-12-08 |
Václav 'Ax' Hůla | Use correct bushing/bearing negative
|
commit | commitdiff | tree |
| 2012-12-08 |
Václav 'Ax' Hůla | Added notes and some
|
commit | commitdiff | tree |
| 2012-12-08 |
Václav 'Ax' Hůla | Give credit to the original clamp author
|
commit | commitdiff | tree |
| 2012-12-08 |
Václav 'Ax' Hůla | Bushong.scad refactor part I
|
commit | commitdiff | tree |
| 2012-12-07 |
Václav 'Ax' Hůla | retab & reindent bracet source
|
commit | commitdiff | tree |
| 2012-12-07 |
Václav 'Ax' Hůla | Fix so its working well on bushings as well as bearings
|
commit | commitdiff | tree |
| 2012-12-04 |
Václav 'Ax' Hůla | make linear bushing
|
commit | commitdiff | tree |
| 2012-12-04 |
Václav 'Ax' Hůla | Config changees for z rod constraint
|
commit | commitdiff | tree |
| 2012-12-04 |
Václav 'Ax' Hůla | Bearings can be fixed by screw now
|
commit | commitdiff | tree |
| 2012-12-04 |
Václav 'Ax' Hůla | fix nit length
|
commit | commitdiff | tree |
| 2012-12-04 |
Václav 'Ax' Hůla | threaded rod constraint
|
commit | commitdiff | tree |
| 2012-11-19 |
Václav 'Ax' Hůla | make clean now deletes .stl and .gcode files
|
commit | commitdiff | tree |
| 2012-11-09 |
Václav 'Ax' Hůla | Make bearing guide thicker, part II
|
commit | commitdiff | tree |
| 2012-11-08 |
Václav 'Ax' Hůla | Make bearing guide thicker
|
commit | commitdiff | tree |
| 2012-08-31 |
Václav 'Ax' Hůla | Rename belt_tooth_stride to belt_tooth_ratio
|
commit | commitdiff | tree |
| 2012-08-05 |
Václav 'Ax' Hůla | Filleted and slightly enlarged y idlermount
|
commit | commitdiff | tree |
| 2012-07-02 |
Václav 'Ax' Hůla | Merge branch 'master' of github.com:josefprusa/Prusa3
|
commit | commitdiff | tree |
| 2012-07-02 |
Václav 'Ax' Hůla | z-axis can be mounted by 2 crews from front or one...
|
commit | commitdiff | tree |
| 2012-06-28 |
Václav 'Ax' Hůla | Some more configurable dimensions
|
commit | commitdiff | tree |
| 2012-06-26 |
Václav 'Ax' Hůla | Fixed typo in filename
|
commit | commitdiff | tree |
| 2012-06-26 |
Václav 'Ax' Hůla | Hotswap carriage
|
commit | commitdiff | tree |
| 2012-06-25 |
Václav 'Ax' Hůla | parametric x axis distance creeps in
|
commit | commitdiff | tree |
| 2012-06-25 |
Václav 'Ax' Hůla | fix hardcoded 16 in fillet
|
commit | commitdiff | tree |
| 2012-06-19 |
Václav 'Ax' Hůla | x-ends: make far wall thicker a bit
|
commit | commitdiff | tree |
| 2012-06-19 |
Václav 'Ax' Hůla | Add readme to output dir
|
commit | commitdiff | tree |
| 2012-06-19 |
Václav 'Ax' Hůla | Merge branch 'fillet'
|
commit | commitdiff | tree |
| 2012-06-14 |
Václav 'Ax' Hůla | more doc moving
|
commit | commitdiff | tree |
| 2012-06-13 |
Václav 'Ax' Hůla | Fix z-axis thickness scaling, make it thicker by default
|
commit | commitdiff | tree |
| 2012-06-13 |
Václav 'Ax' Hůla | dump the damn nuttraps
|
commit | commitdiff | tree |
| 2012-06-13 |
Václav 'Ax' Hůla | idler fix
|
commit | commitdiff | tree |
| 2012-06-12 |
Václav 'Ax' Hůla | Thinner bearing-guide walls
|
commit | commitdiff | tree |
| 2012-06-12 |
Václav 'Ax' Hůla | Merge branch 'fillet' of github.com:josefprusa/Prusa3...
|
commit | commitdiff | tree |
| 2012-06-12 |
Václav 'Ax' Hůla | Give motor some breathing space
|
commit | commitdiff | tree |
| 2012-06-12 |
Václav 'Ax' Hůla | two screw hole
|
commit | commitdiff | tree |
| 2012-06-11 |
Václav 'Ax' Hůla | linear bearings dont need springy housing
|
commit | commitdiff | tree |
| 2012-06-11 |
Václav 'Ax' Hůla | Even smaller floating bearing, lifted ends for firmer...
|
commit | commitdiff | tree |
| 2012-06-11 |
Václav 'Ax' Hůla | Merge branch 'fillet' of github.com:josefprusa/Prusa3...
|
commit | commitdiff | tree |
| 2012-06-10 |
Václav 'Ax' Hůla | reduce springiness, clean-up
|
commit | commitdiff | tree |
| 2012-06-09 |
Václav 'Ax' Hůla | Make floating bearing less springy and smaller
|
commit | commitdiff | tree |
| 2012-06-07 |
Václav 'Ax' Hůla | Address #3
|
commit | commitdiff | tree |
| 2012-06-06 |
Václav 'Ax' Hůla | bearing fixes... hopefully it has all correct dimensions...
|
commit | commitdiff | tree |
| 2012-06-06 |
Václav 'Ax' Hůla | Add credit to fillet() author
|
commit | commitdiff | tree |
| 2012-06-06 |
Václav 'Ax' Hůla | linear bearing has minimum size now, fixed fillet.
|
commit | commitdiff | tree |
| 2012-06-05 |
Václav 'Ax' Hůla | now we have Makefile, ho ho ho!
|
commit | commitdiff | tree |
| 2012-06-05 |
Václav 'Ax' Hůla | Fix bearing sizes
|
commit | commitdiff | tree |
| 2012-06-04 |
Václav 'Ax' Hůla | heptagonal nema17 holes, yay!
|
commit | commitdiff | tree |
| 2012-06-04 |
Václav 'Ax' Hůla | Shorter screw for x-end stepper
|
commit | commitdiff | tree |
| 2012-06-04 |
Václav 'Ax' Hůla | ignore .gcode files too
|
commit | commitdiff | tree |
| 2012-06-04 |
Václav 'Ax' Hůla | give nema17 screw longer head shaft
|
commit | commitdiff | tree |
| 2012-06-04 |
Václav 'Ax' Hůla | Header change, minor fiddling with bushings, x-carriage...
|
commit | commitdiff | tree |
| 2012-06-03 |
Václav 'Ax' Hůla | size clenaup too
|
commit | commitdiff | tree |
| 2012-06-03 |
Václav 'Ax' Hůla | cleanup: remove size argument name from cubes
|
commit | commitdiff | tree |
| 2012-06-03 |
Václav 'Ax' Hůla | tree-point mount of x motor
|
commit | commitdiff | tree |
| 2012-06-03 |
Václav 'Ax' Hůla | purge redundant <inc/functions.scad>
|
commit | commitdiff | tree |
| 2012-06-03 |
Václav 'Ax' Hůla | nushing.scad rework. Y and Z axis change as in configuraion...
|
commit | commitdiff | tree |
| 2012-06-02 |
Václav 'Ax' Hůla | LARGE reformat (tabs to 4 spaces everywhere, cleaning...
|
commit | commitdiff | tree |
| 2012-06-01 |
Václav 'Ax' Hůla | Bushing.scad rewrite, part 1
|
commit | commitdiff | tree |
| 2012-06-01 |
Václav 'Ax' Hůla | More eyecandy
|
commit | commitdiff | tree |
| 2012-06-01 |
Václav 'Ax' Hůla | Extract printer preview, add colors
|
commit | commitdiff | tree |
| 2012-06-01 |
Václav 'Ax' Hůla | Added desired layer width and WoT to README
|
commit | commitdiff | tree |
| 2012-06-01 |
Václav 'Ax' Hůla | Y motor holder has proper shadow stepper now
|
commit | commitdiff | tree |
| 2012-06-01 |
Václav 'Ax' Hůla | rename nema->nema17, put shadow bearing on idlerholder
|
commit | commitdiff | tree |
| next |
HCoop / clinton / prusa3.git / search