X-Git-Url: http://git.hcoop.net/clinton/prusa3.git/blobdiff_plain/54a84af03dc164f01e934713427ba9cde0c204db..8ac34a2a68ebe8a501242a740a4f3c419cbf5993:/box_frame/configuration.scad.dist diff --git a/box_frame/configuration.scad.dist b/box_frame/configuration.scad.dist dissimilarity index 62% index 71cc68f..2bfbb85 100644 --- a/box_frame/configuration.scad.dist +++ b/box_frame/configuration.scad.dist @@ -1,140 +1,138 @@ -// PRUSA iteration3 -// Configuration file -// GNU GPL v3 -// Josef Průša -// Václav 'ax' Hůla -// http://www.reprap.org/wiki/Prusa_Mendel -// http://github.com/prusajr/PrusaMendel - -// PLEASE SELECT ONE OF THE CONFIGURATIONS BELOW -// BY UN-COMMENTING IT - -include ; -include ; - -// Custom settings here, tailor to your supplies and print settings - -layer_height = 0.3; -width_over_thickness = 2.2; - -// Select your belt type ****************************************************** - -//T2.5 -belt_tooth_distance = 2.5; -belt_tooth_ratio = 0.5; - -//T5 (strongly discouraged) -//belt_tooth_distance = 5; -//belt_tooth_ratio = 0.75; - -//HTD3 -//belt_tooth_distance = 3; -//belt_tooth_ratio = 0.75; - -//MXL -//belt_tooth_distance = 2.032; -//belt_tooth_ratio = 0.64; - -//GT2 -//belt_tooth_distance = 2; -//belt_tooth_ratio = 0.5; - -// Choose bearing/bushing configuration *************************************** -// conf_b_* are in inc/conf_bushing.scad - -bushing_xy = conf_b_lm8uu; -bushing_z = conf_b_lm8uu; - -// Select idler bearing size ************************************************** - -// 0 = 608 [standard skate bearings] -// 1 = 624 [roughly same diameter as pulley, makes belt parallel so its prettier] - -idler_bearing = 0; - -// Fillets ******************************************************************** -// 0 = no fillets -// 1 = fillet - -use_fillets = 1; - -//set to 0 for single plate (affects z axis) -i_am_box = 1; - -//if you do your own plate and can move bottom Z screws 5mm up set this to 0 to -//get stronger motor mount -i_want_to_use_single_plate_dxf_and_make_my_z_weaker = 1; - -//radius of long threaded rod on Y frame -//Use 5.4 for M10 or 4.4 for M8 - -y_threaded_rod_long_r = 5.4; - -// Thickness of the XZ plate board -board_thickness = 12; - -// END of custom settings - - -// You are not supposed to change this -board_to_xz_distance = 26; -xaxis_rod_distance = 45; - -//calculated from settings -single_wall_width = width_over_thickness * layer_height; - -idler_size = (idler_bearing == 0) ? 22 : 13; - -//use 4.5 for 608, 2.5 for 624 -idler_size_inner_r = (idler_bearing == 0) ? 4.5 : 2.5; - -idler_width = (idler_bearing == 0) ? 9 : 5; - - -//deltas are used to enlarge parts for bigger bearings -xy_delta = ((bushing_xy[1] <= 7.7) ? 0 : bushing_xy[1] - 7.7) * 0.9; -z_delta = (bushing_z[1] <= 7.7) ? 0 : bushing_z[1] - 7.7; - -// CHANGE ONLY THE STUFF YOU KNOW -// IT WILL REPLACE DEFAULT SETTING - -// RODS - -// threaded_rod_diameter = 0; -// threaded_rod_diameter_horizontal = 0; -// smooth_bar_diameter = 0; -// smooth_bar_diameter_horizontal = 0; - -// Nuts and bolts - -// m8_diameter = 0; -// m8_nut_diameter = 0; - -// m4_diameter = 0; -// m4_nut_diameter = 0; - -// m3_diameter = 0; -// m3_nut_diameter = 0; - -// Bushing holder - -// bushing_core_diameter = smooth_bar_diameter; -// bushing_material_thickness = 0; - -///counted stuff -m3_nut_diameter_bigger = ((m3_nut_diameter / 2) / cos (180 / 6))*2; - -// functions -include - -// These constants define the geometry of the complete-printer.scad - -//x_smooth_rod_length=325; -//y_smooth_rod_length=405; -//z_smooth_rod_length=235; -bed_x_size=225; -bed_y_size=225; - -x_smooth_rod_length=460+board_thickness*2; // 492 for 16mm thickness; 484 for 12mm thickness -y_smooth_rod_length=470; -z_smooth_rod_length=405; +// PRUSA iteration3 +// Configuration file +// GNU GPL v3 +// Josef Průša +// Václav 'ax' Hůla +// http://www.reprap.org/wiki/Prusa_Mendel +// http://github.com/josefprusa/Prusa3 + +include ; +include ; + +// Custom settings here, tailor to your supplies and print settings + +// Extruder settings ********************************************************** +// Don't forget to set your slicer's extruder settings to match the values you +// enter here. + +layer_height = 0.3; +// Width over thickness determines how wide the plastic will be when extruded +// onto the object that is being printed. width_over_thickness is multiplied +// by the layer_height to calculate this width. i.e. If your layer_height is +// set to 0.3 mm and your width_over_thickness is set to 2.2, the resulting +// width will be 0.66 mm. +width_over_thickness = 2.2; + +// Select your belt type ****************************************************** + +// T2.5 +//belt_width = 6.5; //add 0.5 to actual width +//belt_tooth_distance = 2.5; +//belt_tooth_ratio = 0.75; +//belt_thickness = 0.8; + +// T5 (strongly discouraged) +//belt_width = 6.5; +//belt_tooth_distance = 5; +//belt_tooth_ratio = 0.75; +//belt_thickness = 0.8; + +// HTD3 +//belt_width = 9.5; +//belt_tooth_distance = 3; +//belt_tooth_ratio = 0.75; +//belt_thickness = 1.75; + +// MXL +//belt_width = 6.5; +//belt_tooth_distance = 2.032; +//belt_tooth_ratio = 0.64; +//belt_thickness = i have no idea; + +// GT2 +// there is bunch of GT2 belts with different tooth-to-tooth distance +// this one is most common in reprap world +// adjust to your needs. +belt_width = 6.5; +belt_tooth_distance = 2; +belt_tooth_ratio = 0.5; +belt_thickness = 0.8; + +// Choose bearing/bushing configuration *************************************** +// conf_b_* are in inc/conf_bushing.scad + +bushing_xy = conf_b_lm8uu; +bushing_z = conf_b_lm8uu; +// for longer bearings use one shorter in x-carriage to make place for belt attachment +// by default use same as xy +bushing_carriage = bushing_xy; + + +// Select idler bearing size ************************************************** +// bearing_* are in inc/conf_bushing.scad + +idler_bearing = bearing_623; + +// Select carriage lenght ****************************************************** +// 30 for single carriage extruder (two holes with centers 30mm apart) +// 50 for wade or single with fan (three holes, 30-20) +// 80 for full length carriage (four holes, 30-20-30) + +carriage_l_base = 50; + + +// Fillets ******************************************************************** +// fillets are rounded corners of boxes. The right engineering term is probably radius +// but cad software calls it fillet. +// mostly cosmetic, except z axis. +// 0 = no fillets +// 1 = fillet +// 2 = chamfer (cut the edges at 45deg. angle) +// Please do put only parts with fillets on sale, other options are not really tested + +use_fillets = 1; + +// set to 0 for single plate (affects z axis and screws that attach RP parts to frame) +i_am_box = 0; + +// if you do your own plate and can move bottom Z screws 5mm up set this to 0 to +// get stronger motor mount. Only for i_am_box = 0 +i_want_to_use_single_plate_dxf_and_make_my_z_weaker = 1; + + +// Radius of long threaded rod on Y frame + +// Affects y-axis-corner (both box and single plate) +// and y-axis-bracket (box only) + +//Use 5.4 for M10 or 4.4 for M8 +y_threaded_rod_long_r = 5.4; + + +// Thickness of the boards that make the box frame. + +// in y-axis-corner it governs the height of the corners by adjusting the +// distance between ground and M10 threaded rod. (both box and single plate) + +// For box model, the parts that hold Z smooth rod have one hole from front +// and one from side, and this setting makes sure that the screw from side +// is in the center of the plank. + +// Use 12 for single plate +// or 20 if you want to use the Y lm8uu holders +// (extras/bearing-holder-single-plate-y) +board_thickness = 12; + +// Segments of small holes. some poeple claim that a low value makes them easier to print. +small_hole_segments=7; + +// functions +include ; +include ; + +// These constants define the geometry of the doc/complete-printer.scad +bed_x_size=225; +bed_y_size=225; +x_smooth_rod_length=380+board_thickness*2; +y_smooth_rod_length=400; +z_smooth_rod_length=320;