include <configuration.scad>

module bolt_track(width, length, height) {
	hwidth = width / 2;
	hdiff = hwidth - height;
	union() {
		difference() {
			rotate([90, 0, 0])
				translate([hwidth, height, -length])
					cylinder(h=length, r=hwidth, $fn=$fn);
			
			if (height < hwidth) {
				translate([0, -1, height - hwidth - 1])
					cube([width, length + 2, hdiff + 1]);
			}
		}
		cube([width, length, height]);
	}
}

function bracket_width(screw_area) = screw_area * 2 + threaded_rod_diameter;
function bracket_depth(lip_thickness, screw_area) = screw_area * 2 + lip_thickness;
function bracket_height(lip_length) = board_thickness + lip_length;

module beveled_box(size, bevel_size=4) {
	function pythag(a, b) = sqrt(a * a + b * b);
	function bevelradius(x, y, bevel) = pythag(x, y) - bevel * max(x, y) / min(x, y);

	xzbevel = bevelradius(size[0], size[2], bevel_size);
	yzbevel = bevelradius(size[1], size[2], bevel_size);
	intersection() {
		cube(size);
		translate([size[0] / 2, size[1] / 2, size[2] / 2])
			rotate([0, 45, 0])
				cube([xzbevel, size[1], xzbevel], center=true);
		translate([size[0] / 2, size[1] / 2, size[2] / 2])
			rotate([45, 0, 0])
				cube([size[0], yzbevel, yzbevel], center=true);
	}
}

module yrodbracket(screw_area, lip_thickness, lip_length, bevel_size=2.0) {
	inner_radius = threaded_rod_diameter / 2;
	screw_center = screw_area / 2;

	width = bracket_width(screw_area);
	depth = bracket_depth(lip_thickness, screw_area);
	height = bracket_height(lip_length);

	difference() {
		translate([0, 0, -lip_length])
			beveled_box([width, depth, height], bevel_size);
		translate([screw_area, -1, -lip_length - lip_thickness])
			bolt_track(threaded_rod_diameter, depth + 2, lip_length + lip_thickness + inner_radius);

		translate([-1, lip_thickness, -lip_length - 1])
			cube([width + 2, depth, lip_length + 1]);

		// screw holes
		for (x = [screw_center, width - screw_center]) {
			for (y = [lip_thickness + screw_center, screw_area + lip_thickness + screw_center]) {
				translate([x, y, board_thickness])
					rotate([180, 0, 0])
						screw();
			}
		}
	}
}

rotate([90, 0, 0]) {
	for (x = [0, bracket_width(12) + 5]) {
		for (y = [0, bracket_height(3) + 5]) {
			translate([x, 0, y])
				yrodbracket(12, 3, 3);
		}
	}
}