-#!/bin/sh
+#!/bin/bash
# Copyright (c) 1998-2001 Robert Woodcock <rcw@debian.org>
# Copyright (c) 2003-2005 Jesus Climent <jesus.climent@hispalinux.es>
# This code is hereby licensed for public consumption under either the
#
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
+#
+# $Id$
-VERSION="2.3.99-$Id $"
+VERSION='2.3.99-$Revision$'
usage ()
{
echo "Options:"
echo "-1 Encode the whole CD in a single file"
echo "-a <action1[,action2]...>"
-echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
+echo " Actions to perform (cddb,read,normalize,encode,tag,move,replaygain,playlist,clean)"
#echo "-A Experimental actions (retag, transcode)"
-echo "-b Batch mode: enable album normalization and nogap encoding"
+echo "-b Enable batch normalization"
+#echo "-B Disable batch replaygain (do file by file)"
echo "-c <file>"
echo " Specify a configuration file (overrides system and user config files)"
echo "-C <discid#>"
echo " Specify CDROM device to grab (flac uses a single-track flac file)"
echo "-D Debugging mode (equivalent to sh -x abcde)"
echo "-e Erase encoded track information from status file"
-#echo "-E Set the encoding information for the tags"
+echo "-f Force operations that otherwise are considered harmful. Read \"man abcde\""
+echo "-g Use \"lame --nogap\" for MP3 encoding. Disables low disk and pipes flags"
echo "-h This help information"
#echo "-i Tag files while encoding, when possible (local only) -NWY-"
echo "-j <#> Number of encoder processes to run at once (localhost)"
echo "-m Modify playlist to include CRLF endings, to comply with some players"
echo "-M Create a CUE file"
echo "-o <type1[,type2]...>"
-echo " Output file type(s) (vorbis,mp3,flac,spx,mpc). Defaults to vorbis"
+echo " Output file type(s) (vorbis,mp3,flac,spx,mpc,wav). Defaults to vorbis"
echo "-p Pad track numbers with 0's (if less than 10 tracks)"
echo "-P Use UNIX pipes to read+encode without wav files"
echo "-r <host1[,host2]...>"
echo " Also encode on these remote hosts"
-echo "-R Add replaygain values to the tag info (only for vorbis,flac)"
+#echo "-R Add replaygain values to the tag info (only for vorbis,flac,mp3)"
echo "-s <field>"
echo " Show dielfs from the CDDB info (year,genre)"
echo "-S <#> Set the CD speed"
-#echo "-t File types to preprocess (wav)"
-#echo "-T Set postprocessing options"
echo "-t <#> Start the track numbering at a given number"
echo "-T <#> Same as -t but modifies tag numbering"
+echo "-u Use UNICODE tags and comments"
echo "-v Show version number and exit"
echo "-V Be a bit more verbose about what is happening behind the scenes"
echo "-x Eject CD after all tracks are read"
echo "-w <comment>"
echo " Add a comment to the CD tracks"
echo "-W <#> Contatenate CDs: -T #01 -w \"CD #\""
+echo "-z Use debug CDROMREADERSYNTAX option (needs cdparanoia)"
echo ""
echo "Tracks is a space-delimited list of tracks to grab."
echo "Ranges specified with hyphens are allowed (i.e., 1-5)."
#echo "Double hyphens are used to concatenate tracks"
}
+addstatus ()
+{
+ echo "$@" >> "$ABCDETEMPDIR/status"
+}
+
+# log [level] [message]
+#
+# log outputs the right message in a common format
+log ()
+{
+ BLURB="$1"
+ shift
+ case $BLURB in
+ error) echo "[ERROR] abcde: $@" >&2 ;;
+ warning) echo "[WARNING] $@" >&2 ;;
+ info) echo "[INFO] $@" ;;
+ esac
+}
+
# Funtions to replace the need of seq, which is too distribution dependant.
f_seq_row ()
{
done
echo
else
- echo "abcde: syntax error while processing track numbers" >&2
+ log error "syntax error while processing track numbers"
exit 1
fi
}
fi
}
+# chechwarnings [blurb]
+# Returns "0" if the blurb was found (meaning there was an warning),
+# returns 1 if it wasn't (yes this is a little backwards).
+# Does not print the blurb on stdout.
+# Otherwise, returns "".
+checkwarnings ()
+{
+ if [ -e "$ABCDETEMPDIR/warnings" ]; then :; else
+ return 1
+ fi
+ # Take the last line in the status file if there's multiple matches
+ PATTERN="^$1(:.*)?$"
+ BLURB="$(egrep $PATTERN "$ABCDETEMPDIR/warnings" | tail -n 1)"
+
+ if [ -z "$BLURB" ]; then
+ # negative, we did not have a negative...
+ return 1
+ else
+ # affirmative, we had a negative...
+ return 0
+ fi
+}
+
# checkerrors [blurb]
# Returns "0" if the blurb was found (meaning there was an error),
# returns 1 if it wasn't (yes this is a little backwards).
# do_getcddbinfo
# Finds an specific field from cddbinfo
-#
-# TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')
-# TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d \[:cntrl:\])
-# TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
-
do_getcddbinfo()
{
case $1 in
if checkstatus replaygain; then :; else
run_command "" echo "Adding replygain information..."
for OUTPUT in $( echo $OUTPUTTYPE | tr , \ )
- # THE OUTPUT NEEDS TO BE CORRECTED WITH THE CONTAINER?
do
case $OUTPUT in
vorbis|ogg)
;;
esac
OUTPUTFILES=""
+ REPLAYINDEX=0
for UTRACKNUM in $TRACKQUEUE
do
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
ALBUMFILE="$(mungefilename "$DALBUM")"
do_gettracknum
if [ "$VARIOUSARTISTS" = "y" ]; then
- OUTPUTFILE=$(eval echo $VAOUTPUTFORMAT)
+ OUTPUTFILE="$(eval echo $VAOUTPUTFORMAT)"
else
- OUTPUTFILE=$(eval echo $OUTPUTFORMAT)
+ OUTPUTFILE="$(eval echo $OUTPUTFORMAT)"
fi
- OUTPUTFILES="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT $OUTPUTFILES"
+ OUTPUTFILES[$REPLAYINDEX]="$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
+ (( REPLAYINDEX = $REPLAYINDEX + 1 ))
done
case "$OUTPUT" in
flac)
- run_command replaygain-flac $METAFLAC --add-replay-gain $OUTPUTFILES
+ run_command replaygain-flac $METAFLAC --add-replay-gain "${OUTPUTFILES[@]}"
;;
vorbis|ogg)
- run_command replaygain-vorbis $VORBISGAIN --album $OUTPUTFILES
+ run_command replaygain-vorbis $VORBISGAIN --album "${OUTPUTFILES[@]}"
+ ;;
+ mp3)
+ run_command replaygain-mp3 $MP3GAIN -a "${OUTPUTFILES[@]}"
+ ;;
+ mpc)
+ run_command replaygain-mpc $MPPGAIN --auto "${OUTPUTFILES[@]}"
;;
*);;
esac
done
- if checkerrors replaygain-.{3,6}; then :; else
+ if checkerrors "replaygain-.{3,6}"; then :; else
run_command replaygain true
fi
fi
do_tag ()
{
COMMENTOUTPUT="$(eval echo ${COMMENT})"
+ CDDBDISCID=$(echo $TRACKINFO | cut -d' ' -f1)
run_command '' echo "Tagging track $1 of $TRACKS: $TRACKNAME..."
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
-# if [ -n "$STARTTRACKNUMBER" -a -n "$STARTTRACKNUMBERTAG" ] ; then
-# # Get the trackpadding from the current track
-# CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
-# TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
-# fi
if [ -n "$STARTTRACKNUMBERTAG" ] ; then
do_gettracknum
fi
mpc)
run_command tagtrack-$OUTPUT-$1 true
;;
+ wav)
+ run_command tagtrack-$OUTPUT-$1 true
+ ;;
esac
done
if checkerrors "tagtrack-(.{3,6})-$1"; then :; else
}
-# do_batch_encode
+# do_nogap_encode
# variables used:
# OUTPUTTYPE, {FOO}ENCODERSYNTAX, ENCNICE, ENCODER, ENCODEROPTS
-do_batch_encode ()
+do_nogap_encode ()
{
# The commands here don't go through run_command because they're never supposed to be silenced
- echo "Batch encoding tracks: $TRACKQUEUE"
- OUTPUT=$(echo $OUTPUTTYPE | grep "mp3" )
- case "$OUTPUT" in
- mp3)
- case "$MP3ENCODERSYNTAX" in
- lame)
- (
- cd "$ABCDETEMPDIR"
- TRACKFILES=
- for UTRACKNUM in $TRACKQUEUE
- do
- TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
- done
- nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS `[ "$MP3ENCODER" = "lame" ] && echo "--nogap"` $TRACKFILES
- RETURN=$?
- if [ "$RETURN" != "0" ]; then
- echo "batch-encode: $ENCODER returned code $RETURN" >> errors
- else
+ echo "Encoding gapless MP3 tracks: $TRACKQUEUE"
+ for OUTPUT in $(echo $OUTPUTTYPE | tr , \ )
+ do
+ case "$OUTPUT" in
+ mp3)
+ case "$MP3ENCODERSYNTAX" in
+ lame)
+ (
+ cd "$ABCDETEMPDIR"
+ TRACKFILES=
for UTRACKNUM in $TRACKQUEUE
do
- run_command encodetrack-$UTRACKNUM true
+ TRACKFILES="$TRACKFILES track$UTRACKNUM.wav"
done
- fi
- )
+ nice $ENCNICE $MP3ENCODER $MP3ENCODEROPTS --nogap $TRACKFILES
+ RETURN=$?
+ if [ "$RETURN" != "0" ]; then
+ echo "nogap-encode: $ENCODER returned code $RETURN" >> errors
+ else
+ for UTRACKNUM in $TRACKQUEUE
+ do
+ run_command encodetrack-$OUTPUT-$UTRACKNUM true
+ #run_command encodetrack-$UTRACKNUM true
+ done
+ fi
+ )
+ ;;
+ esac
;;
esac
- ;;
- esac
+ done
+ if checkerrors "nogap-encode"; then :; else
+ if [ ! "$KEEPWAVS" = "y" ] ; then
+ if [ ! "$KEEPWAVS" = "move" ] ; then
+ rm -f "$IN"
+ fi
+ fi
+ fi
# Other encoders fall through to normal encoding as the tracks
# have not been entered in the status file.
}
mp3)
case "$MP3ENCODERSYNTAX" in
# FIXME # check if mp3enc needs -if for pipes
+ # FIXME # I have not been able to find a working mp3enc binary
mp3enc)
FILEARG="-if $IN"
;;
case "$OUTPUT" in
vorbis|ogg)
OUT="$ABCDETEMPDIR/track$1.$OGGOUTPUTCONTAINER"
+ OUTPUT=$OGGOUTPUTCONTAINER
;;
flac)
OUT="$ABCDETEMPDIR/track$1.$FLACOUTPUTCONTAINER"
+ OUTPUT=$FLACOUTPUTCONTAINER
;;
*)
OUT="$ABCDETEMPDIR/track$1.$OUTPUT"
;;
esac
+ if [ "$NOGAP" = "y" ] && checkstatus encodetrack-$OUTPUT-$1 ; then
+ continue
+ fi
if [ X"$USEPIPES" = "Xy" ]; then
RUN_COMMAND=""
+ # We need a way to store the creation of the files when using PIPES
+ RUN_COMMAND_PIPES="run_command encodetrack-$OUTPUT-$1 true"
else
run_command '' echo "Encoding track $1 of $TRACKS: $TRACKNAME..."
RUN_COMMAND="run_command encodetrack-$OUTPUT-$1"
;;
flac)
case "$2" in
- %local*%)
+ %local*%)
case "$FLACENCODERSYNTAX" in
- flac) $RUN_COMMAND nice $ENCNICE $FLACENCODER $FLACENCODEROPTS -o "$OUT" "$IN" ;;
+ flac) $RUN_COMMAND nice $ENCNICE $FLACENCODER -f $FLACENCODEROPTS -o "$OUT" "$IN" ;;
esac
- ;;
-
- *)
- echo -n "DISTMP3:"
- echo "$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
- $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev/null 2>&1
+ ;;
+ *)
+ vecho -n "DISTMP3:"
+ vecho "$DISTMP3 $DISTMP3OPTS $2 $IN $OUT >/dev/null 2>&1"
+ $RUN_COMMAND nice $DISTMP3NICE $DISTMP3 $DISTMP3OPTS "$2" "$IN" "$OUT" > /dev/null 2>&1
;;
esac
;;
## FIXME ## to the encoder ends up empty.
$RUN_COMMAND nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
;;
+ wav)
+ # In case of wav output we need nothing. Just keep the wavs.
+ ;;
esac
+ $RUN_COMMAND_PIPES
done
# Only remove .wav if the encoding succeeded
if checkerrors "encodetrack-(.{3,6})-$1"; then :; else
run_command encodetrack-$1 true
if [ ! "$KEEPWAVS" = "y" ] ; then
- rm -f "$IN"
+ if [ ! "$KEEPWAVS" = "move" ] ; then
+ rm -f "$IN"
+ fi
fi
fi
else
# do_batch_gain
# variables used:
-# MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS
+# MP3GAIN, MP3GAINOPTS, VORBISGAIN, VORBISGAINOPTS, MPPGAIN, MPPGAINOPTS
# FIXME #
do_batch_gain ()
{
do
MP3FILES="$TRACKFILES track$UTRACKNUM.mp3"
done
- # XXX: Hard-coded batch option!
+ # FIXME # Hard-coded batch option!
$NORMALIZER -b $NORMALIZEROPTS $TRACKFILES
RETURN=$?
if [ "$RETURN" != "0" ]; then
YEAR="$(echo $CDYEAR)"
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- # if [ -n "$STARTTRACKNUMBER" ] ; then
- # # Get the trackpadding from the current track
- # CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
- # TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
- # else
- # TRACKNUM=${UTRACKNUM}
- # fi
do_gettracknum
# Supported variables for OUTPUTFORMAT are GENRE, ALBUMFILE, ARTISTFILE,
# TRACKFILE, and TRACKNUM.
esac
# Check that the directory for OUTPUTFILE exists, if it doesn't, create it
OUTPUTFILEDIR="$(dirname "$OUTPUTDIR/$OUTPUTFILE")"
- # mkdir -p shouldn't return an error if the directory already exists
- mkdir -p "$OUTPUTFILEDIR"
- run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
+ case $OUTPUT in
+ wav)
+ if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
+ # FIXME # introduce warnings?
+ :
+ else
+ # mkdir -p shouldn't return an error if the directory already exists
+ mkdir -p "$OUTPUTFILEDIR"
+ run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
+ if checkstatus movetrack-output-$OUTPUT; then :; else
+ run_command movetrack-output-$OUTPUT true
+ fi
+ fi
+ ;;
+ *)
+ # mkdir -p shouldn't return an error if the directory already exists
+ mkdir -p "$OUTPUTFILEDIR"
+ run_command movetrack-$1 mv "$ABCDETEMPDIR/track$1.$OUTPUT" "$OUTPUTDIR/$OUTPUTFILE.$OUTPUT"
+ if checkstatus movetrack-output-$OUTPUT; then :; else
+ run_command movetrack-output-$OUTPUT true
+ fi
+ ;;
+ esac
# Lets move the cue file
if CUEFILE=$(checkstatus cuefile) >/dev/null ; then
if [ -r "$ABCDETEMPDIR/$CUEFILE" ]; then
#run_command '' vecho "Copying cue file to its destination directory..."
if checkstatus onetrack >/dev/null ; then
case $OUTPUT in
+ wav)
+ if [ "$DOCLEAN" != "y" ] && [ "$FORCE" != "y" ]; then
+ # We dont have the dir, since it was not created before.
+ :
+ else
+ run_command movecue-$OUTPUT cp "$ABCDETEMPDIR/$CUEFILE" "$OUTPUTDIR/$OUTPUTFILE.cue"
+ fi
+ ;;
# NOTE: Creating a cue file with the 3-char-extension files is to comply with
# http://brianvictor.tripod.com/mp3cue.htm#details
[a-z0-9][a-z0-9][a-z0-9])
do
# Shares some code with do_move since the filenames have to match
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- #TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')
do_getcddbinfo TRACKNAME
splitvarious
TRACKFILE="$(mungefilename "$TRACKNAME")"
ALBUMFILE="$(mungefilename "$DALBUM")"
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- # if [ -n "$STARTTRACKNUMBER" ] ; then
- # # Get the trackpadding from the current track
- # CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
- # TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - $FIRSTTRACK ))
- # else
- # TRACKNUM=${UTRACKNUM}
- # fi
do_gettracknum
if [ "$VARIOUSARTISTS" = "y" ]; then
OUTPUTFILE=$(eval echo $VAOUTPUTFORMAT)
# Make sure there's a CD in there by checking cd-discid's return code
if [ ! "$?" = "0" ]; then
if [ "$CDROMREADERSYNTAX" = "flac" ] ; then
- echo "abcde error: cuesheet information from the flac file could not be read." >&2
- echo "abcde error: Perhaps the flac file does not contain a cuesheet?." >&2
+ log error "cuesheet information from the flac file could not be read."
+ log error "Perhaps the flac file does not contain a cuesheet?."
exit 1
else
- echo "abcde error: CD could not be read. Perhaps there's no CD in the drive?" >&2
+ log error "CD could not be read. Perhaps there's no CD in the drive?"
exit 1
fi
fi
disktool -m ${CDROM#/dev/}
fi
WEHAVEACD=y
+ DISCID=$(echo $TRACKINFO | cut -f1 -d' ')
else
TRACKINFO=$(cat "$WAVOUTPUTDIR/abcde.$DISCID/discid")
fi
CDPARANOIAOUTPUT="$( $CDROMREADER -$CDPARANOIACDROMBUS $CDROM -Q --verbose 2>&1 )"
RET=$?
if [ ! "$RET" = "0" ];then
- echo "Warning: Something went wrong while querying the CD... Maybe a DATA CD?"
+ log warning "something went wrong while querying the CD... Maybe a DATA CD?"
fi
TRACKS="$(echo "$CDPARANOIAOUTPUT" | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | get_first | tr -d "." | tr '\n' ' ')"
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
+ # Previous versions of abcde would store the tracks on a file, instead of the status record.
+ if [ -f "$ABCDETEMPDIR/cdparanoia-audio-tracks" ]; then
+ echo cdparanoia-audio-tracks=$( cat "$ABCDETEMPDIR/cdparanoia-audio-tracks" ) >> "$ABCDETEMPDIR/status"
+ rm -f "$ABCDETEMPDIR/cdparanoia-audio-tracks"
+ fi
if [ -f "$ABCDETEMPDIR/status" ] && TRACKS=$(checkstatus cdparanoia-audio-tracks); then :; else
TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
fi
TRACKS=$(echo $TRACKINFO | cut -f2 -d' ')
fi
if echo "$TRACKS" | grep "[[:digit:]]" > /dev/null 2>&1 ;then :;else
- echo "The disc does not contain any tracks. Giving up..."
+ log info "The disc does not contain any tracks. Giving up..."
exit 0
fi
echo -n "Grabbing entire CD - tracks: "
while [ "$X" -ne "$TRACKS" ]
do
X=$(printf "%0.${TRACKNUMPADDING}d" $(expr $X + 1))
- TRACKQUEUE=$(echo "$TRACKQUEUE" $X)
+ TRACKQUEUE=$(echo $TRACKQUEUE $X)
done
echo $TRACKQUEUE
else
exit 1
fi
cat /dev/null > "$ABCDETEMPDIR/status"
+ # Store the abcde version in the status file.
+ echo "abcde-version=$VERSION" >> "$ABCDETEMPDIR/status"
fi
if [ X"$MAKECUEFILE" = "Xy" -a X"$WEHAVEACD" = "Xy" ]; then
if checkstatus cuefile > /dev/null 2>&1 ; then :; else
if $CUEREADER $CUEREADEROPTS > "$ABCDETEMPDIR/$CUEFILE"; then
echo cuefile=$CUEFILE >> "$ABCDETEMPDIR/status"
else
- echo "abcde: reading the CUE sheet with mkcue is still considered experimental"
- echo "abcde: and there was a problem with the CD reading. abcde will continue,"
- echo "abcde: but consider reporting the problem to the abcde author"
+ log warning "reading the CUE sheet with mkcue is still considered experimental"
+ log warning "and there was a problem with the CD reading. abcde will continue,"
+ log warning "but consider reporting the problem to the abcde author"
fi
fi
fi
# Create a proper CUE file based on the CUE file we created before.
do_cleancue()
{
- # FIXME # we can get the name of the cuefile from the status file
if CUEFILE_IN="$ABCDETEMPDIR"/$(checkstatus cuefile); then
CUEFILE_OUT=$CUEFILE_IN.out
### FIXME ### checkstatus cddb
fi
if [ "$USELOCALRESP" = "y" ]; then
#echo "Using local copy of CDDB data"
- cp "${CDDBLOCALFILE}" "$ABCDETEMPDIR/cddbread.1"
+ echo "# DO NOT ERASE THIS LINE! Added by abcde to imitate cddb output" > "$ABCDETEMPDIR/cddbread.1"
+ cat "${CDDBLOCALFILE}" >> "$ABCDETEMPDIR/cddbread.1"
echo 999 > "$ABCDETEMPDIR/cddbquery" # Assuming 999 isn't used by CDDB
echo cddb-readcomplete >> "$ABCDETEMPDIR/status"
do_cddbparse "${CDDBLOCALFILE}" > "$ABCDETEMPDIR/cddbchoices"
echo -n "Which entry would you like abcde to use (0 for none)? [0-$CDDBCHOICES]: " >&2
read CDDBCHOICE
[ X"$CDDBCHOICE" = "X" ] && CDDBCHOICE=1
- if echo $CDDBCHOICE | egrep -q "[[:digit:]]+,[[:digit:]]+" ; then
+ if echo $CDDBCHOICE | egrep -q "[[:space:]]*[[:digit:]]+,[[:digit:]]+[[:space:]]*" ; then
if [ ! X"$DIFF" = "X" ]; then
- PARSECHOICE1=$(echo $CDDBCHOICE | cut -d"," -f1)
- PARSECHOICE2=$(echo $CDDBCHOICE | cut -d"," -f2)
+ PARSECHOICE1=$(echo $CDDBCHOICE | cut -d"," -f1 | xargs printf %d 2>/dev/null)
+ PARSECHOICE2=$(echo $CDDBCHOICE | cut -d"," -f2 | xargs printf %d 2>/dev/null)
if [ $PARSECHOICE1 -lt 1 ] || [ $PARSECHOICE1 -gt $CDDBCHOICES ] || \
[ $PARSECHOICE2 -lt 1 ] || [ $PARSECHOICE2 -gt $CDDBCHOICES ] || \
[ $PARSECHOICE1 -eq $PARSECHOICE2 ]; then
echo "Invalid diff range. Please select two coma-separated numbers between 1 and $CDDBCHOICES" >&2
else
-
# We parse the 2 choices to diff, store them in temporary files and diff them.
for PARSECHOICE in $(echo $CDDBCHOICE | tr , \ ); do
do_cddbparse "$ABCDETEMPDIR/cddbread.$PARSECHOICE" > "$ABCDETEMPDIR/cddbread.parsechoice.$PARSECHOICE"
else
echo "The diff program was not found in your path. Please choose a number between 0 and $CDDBCHOICES." >&2
fi
- else
+ elif echo $CDDBCHOICE | egrep -q "[[:space:]]*[[:digit:]]+[[:space:]]*" ; then
+ # Make sure we get a valid choice
+ CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
if [ $CDCHOICENUM -lt 0 ] || [ $CDCHOICENUM -gt $CDDBCHOICES ]; then
- # Make sure we get a valid choice
- CDCHOICENUM=$(echo $CDDBCHOICE | xargs printf %d 2>/dev/null)
echo "Invalid selection. Please choose a number between 0 and $CDDBCHOICES." >&2
fi
fi
/usr/bin/mg "$CDDBDATA"
# bomb out
else
- echo "No editor available. Check your EDITOR environment variable." >&2
+ log warning "no editor available. Check your EDITOR environment variable."
fi
# delete editor backup file if it exists
if [ -w "$CDDBDATA~" ]; then
FIRSTTRACK=$2
LASTTRACK=$3
UTRACKNUM=$FIRSTTRACK
- case "$CDROMREADERSYNTAX" in
- ### FIXME ### How are we calculating the tracks in flac mode?
- flac) READTRACKNUMS="$FIRSTTRACK.1-$(($LASTTRACK + 1)).0" ;;
- cdparanoia) READTRACKNUMS="$FIRSTTRACK-$LASTTRACK" ;;
- cdda2wav) READTRACKNUMS="$FIRSTTRACK+$LASTRACK" ;;
- *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
- exit 1 ;;
- esac
else
UTRACKNUM=$1
fi
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
if [ "$USEPIPES" = "y" ]; then
- TEMPARG="PIPE_$CDROMREADERSYNTAX"
+ TEMPARG="PIPERIPPER_$CDROMREADERSYNTAX"
FILEARG="$( eval echo "\$$TEMPARG" )"
REDIR=""
PIPE_MESSAGE="and encoding "
echo "Grabbing ${PIPE_MESSAGE}tracks $UTRACKNUM - $LASTTRACK as one track ..." >&2
else
if [ -r "$CDDBDATA" ]; then
- #TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d \[:cntrl:\])
do_getcddbinfo TRACKNAME
echo "Grabbing ${PIPE_MESSAGE}track $UTRACKNUM: $TRACKNAME..." >&2
else
vecho ()
{
if [ x"$EXTRAVERBOSE" != "x" ]; then
- echo $@
+ case $1 in
+ warning) log warning "$@" ;;
+ *) echo "$@" ;;
+ esac
+fi
+}
+
+# decho [message]
+#
+# decho outputs a debug message if DEBUG is selected
+decho ()
+{
+if [ x"$DEBUG" != "x" ]; then
+ if echo $1 | grep -q "^\[" ; then
+ DEBUGECHO=$(echo "$@" | tr -d '[]')
+ echo "[DEBUG] $DEBUGECHO: `eval echo \\$${DEBUGECHO}`"
+ else
+ echo "[DEBUG] $1"
+ fi
fi
}
VARIOUSARTISTSTYLE=forward
KEEPWAVS=n
PADTRACKS=n
+NOGAP=n
+BATCHNORM=n
# If using scsi devices, cdda2wav needs a CDROMID, instead of a device node
# i.e. CDROMID="1,0,0"
# program paths - defaults to checking your $PATH
# mp3
LAME=lame
+TOOLAME=toolame
GOGO=gogo
BLADEENC=bladeenc
L3ENC=l3enc
NORMALIZE=normalize-audio
CDSPEED=eject
VORBISGAIN=vorbisgain
+MP3GAIN=mp3gain
+MPPGAIN=replaygain
MKCUE=mkcue
MKTOC=cdrdao
DIFF=diff
# Options for programs called from abcde
# mp3
LAMEOPTS=
+TOOLAMEOPTS=
GOGOOPTS=
BLADEENCOPTS=
L3ENCOPTS=
VORBIZEOPTS=
OGGENCOPTS=
# flac
-FLACOPTS="-f"
+FLACOPTS=
# speex
SPEEXENCOPTS=
# mpc
MKTOCOPTS=""
VORBISCOMMENTOPTS="-R"
METAFLACOPTS="--no-utf8-convert"
+DIFFOPTS=
# Default to one process if -j isn't specified
MAXPROCS=1
curl) HTTPGETOPTS="-f -s";;
fetch)HTTPGETOPTS="-q -o -";;
ftp) HTTPGETOPTS="-q -o -";;
- *) echo "abcde warning: HTTPGET in non-standard and HTTPGETOPTS are not defined." >&2 ;;
+ *) log warning "HTTPGET in non-standard and HTTPGETOPTS are not defined." ;;
esac
fi
fi
# Parse command line options
-#while getopts 1a:A:bc:C:d:Dehj:klLmMnNo:pPr:Rs:S:t:T:vVxw:W: opt ; do
-while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPr:Rs:S:t:T:vVxw:W:z opt ; do
+#while getopts 1a:bc:C:d:Dehj:klLmMnNo:pPr:Rs:S:t:T:vVxw:W: opt ; do
+while getopts 1a:bBc:C:d:Defghj:klLmMnNo:pPr:s:S:t:T:uvVxw:W:z opt ; do
case "$opt" in
1) ONETRACK=y ;;
a) ACTIONS="$OPTARG" ;;
A) EXPACTIONS="$OPTARG" ;;
- b) BATCH=y ;;
- c) if [ -e "$OPTARG" ] ; then . "$OPTARG" ; else echo "abcde error: config file \"$OPTARG\" cannot be found." >&2 ; exit 1 ; fi ;;
- C) DISCID="${OPTARG#abcde.}" ;;
+ b) BATCHNORM=y ;;
+ B) NOBATCHREPLAYGAIN=y ;;
+ c) if [ -e "$OPTARG" ] ; then . "$OPTARG" ; else log error "config file \"$OPTARG\" cannot be found." ; exit 1 ; fi ;;
+ C) DISCID="$( echo ${OPTARG#abcde.} | tr -d /)" ;;
d) CDROM="$OPTARG" ;;
D) set -x ;;
e) ERASEENCODEDSTATUS=y ;;
h) usage; exit ;;
e) ERASEENCODEDSTATUS=y ;;
E) ENCODING="$OPTARG" ;;
-# f) FORCECDDBUSELOCAL=y ;;
+ f) FORCE=y ;;
+ g) NOGAP=y ;;
i) INLINETAG=y ;;
j) MAXPROCS="$OPTARG" ;;
k) KEEPWAVS=y ;;
p) PADTRACKS=y ;;
P) USEPIPES=y ;;
r) REMOTEHOSTS="$OPTARG" ;;
- R) REPLAYGAIN=y ;;
+ R) DOREPLAYGAIN=y ;;
s) SHOWCDDBFIELDS="$OPTARG" ;;
S) CDSPEEDVALUE="$OPTARG" ;;
-# t) PREPROCESSFORMATS="$OPTARG"
-# PREPROCESS=y ;;
-# T) POSTPROCESSFORMATS="$OPTARG" ;;
t) STARTTRACKNUMBER="$OPTARG" ;;
T) STARTTRACKNUMBER="$OPTARG" ; STARTTRACKNUMBERTAG="y" ;;
+ u) CDDBPROTO=6 ;;
v)
echo "This is abcde v$VERSION."
echo "Usage: abcde [options] [tracks]"
W) if echo $OPTARG | grep -q "[[:digit:]]" ; then
STARTTRACKNUMBER="${OPTARG}01" ; STARTTRACKNUMBERTAG="y" ; COMMENT="CD${OPTARG}"
else
- echo "abcde error: argument of -W must be integer"
+ log error "argument of -W must be integer"
exit 1
fi
;;
- z) echo "Placeholder for a future autodebug option" ;;
+ z) DEBUG=y ; CDROMREADERSYNTAX=debug ; EJECTCD="n" ;;
?) usage; exit ;;
esac
done
fi
fi
+# If the user provided a DISCID, disable eject
+if [ -n "$DISCID" ]; then EJECTCD=n ; fi
+
# Decide if we can continue.
if [ "$ONETRACK" = "y" ]; then
# FIXME # remove check as soon as we find out about the other readers
flac) ;;
cdparanoia) ;;
cdda2wav) ;;
- *) echo "abcde error: $CDROMREADERSYNTAX does not support ONETRACK mode"
+ *) log error "$CDROMREADERSYNTAX does not support ONETRACK mode"
exit 1 ;;
esac
- if [ "$BATCH" = "y" ]; then
- echo "abcde error: BATCH mode is not compatible with ONETRACK mode"
- BATCH=n
+ if [ "$BATCHNORM" = "y" ]; then
+ log warning "BATCHNORM mode is not compatible with ONETRACK mode. Disabling..."
+ BATCHNORM=n
+ fi
+ if [ "$NOGAP" = "y" ]; then
+ log warning "NOGAP mode is not compatible with ONETRACK mode. Disabling..."
+ NOGAP=n
fi
# It does not matter how many tracks we want. In ONETRACK mode we grab them all
# FIXME # allow ranges of tracks to be selected for onetrack ripping
if [ $# -gt 0 ]; then
- vecho "abcde warning: ONETRACK mode selected, grabbing all tracks..."
+ log warning "ONETRACK mode selected, grabbing all tracks..."
fi
else
while [ $# -gt 0 ]; do
if [ "$DONORMALIZE" = "y" ] && [ "$DOREPLAYGAIN" = "y" ]; then
# FIXME # should we abort on error or just inform the user?
- :
+ log warning "selected both normalize and replaygain actions"
fi
for SHOWCDDBFIELD in $(echo $SHOWCDDBFIELDS | tr , \ ); do
if [ "$CDROMREADERSYNTAX" = "cdda2wav" ] && [ "$NEEDCDROMID" = "y" ] ; then
if [ "$OSFLAVOUR" = "FBSD" ]; then
if ! echo "$CDROMID" | grep "^[0-9],[0-9],[0-9]$" >/dev/null 2>&1 ; then
- echo "abcde error: CDROMID not in the right format for $CDROMREADERSYNTAX"
- echo "Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
+ log error "CDROMID not in the right format for $CDROMREADERSYNTAX"
+ log error "Use \"cdrecord -scanbus\" to obtain a adecuate ID an set CDROMID accordingly"
exit 1
fi
fi
elif [ ! -e "$CDROM" -a X"$DOREAD" = "Xy" ]; then
- echo "abcde error: CDROM device cannot be found." >&2
+ log error "CDROM device cannot be found."
exit 1
fi
# avoid processing if we are not going to hit the CDROM.
elif [ X"$DOREAD" = "Xy" ]; then
- echo "abcde error: CDROM has not been defined or cannot be found" >&2
+ log error "CDROM has not been defined or cannot be found"
exit 1
fi
# - anything else?
if [ X"$USEPIPES" = "Xy" ]; then
if [ $(echo "$OUTPUTTYPE" | tr , \ | wc -w ) -gt 1 ]; then
- echo "abcde error: Unix pipes not compatible with multiple outputs" >&2
+ log error "Unix pipes not compatible with multiple outputs"
exit 1
fi
if [ X"$DONORMALIZE" = "Xy" ]; then
- echo "abcde error: Unix pipes not compatible with normalizer"
+ log error "Unix pipes not compatible with normalizer"
# FIXME # Do we need to exit or shall we just disable the mode?
exit 1
fi
+ if [ X"$BATCHNORM" = "Xy" ]; then
+ log error "Unix pipes not compatible with BATCHNORM encoding"
+ exit 1
+ fi
+ if [ X"$NOGAP" = "Xy" ]; then
+ log error "Unix pipes not compatible with NOGAP encoding"
+ exit 1
+ fi
if [ X"$DOENCODE" = "Xn" ]; then
- vecho "Disabling Unix pipes since we are not encoding!"
+ vecho warning "Disabling Unix pipes since we are not encoding!"
USEPIPES=n
fi
if [ X"$LOWDISK" = "Xy" ]; then
- vecho "abcde error: Unix pipes not compatible with lowdisk algorithm"
+ log error "Unix pipes not compatible with lowdisk algorithm"
exit 1
fi
fi
+# LOWDISK pre-tests, before we get into more problematic stuff
+# Not compatible with anything that needs all the files in the hard disc:
+# - BATCHNORM
+# - NOGAP lame mode
+if [ X"$LOWDISK" = "Xy" ]; then
+ if [ X"$BATCHNORM" = "Xy" ]; then
+ log error "Unix pipes not compatible with BATCHNORM encoding"
+ exit 1
+ fi
+ if [ X"$NOGAP" = "Xy" ]; then
+ log error "Unix pipes not compatible with NOGAP encoding"
+ exit 1
+ fi
+fi
+
+# BATCHNORM pre-tests, before we get into serious problems
+# Not compatible with
+if [ "$BATCHNORM" = "y" ] && [ "$DONORMALIZE" = "n" ]; then
+ vecho warning "Disabling BATCHNORM since we are not normalizing!"
+ BATCHNORM=n
+fi
+
# Check the encoding format from the ones available in the system, if nothing has been configured in the system.
if [ X"$OUTPUTTYPE" = "X" ]; then
for DEFAULT_OUTPUT in $( echo "$DEFAULT_OUTPUT_BINARIES" | tr , \ ); do
fi
done
if [ X"$OUTPUTTYPE" = "X" ]; then
- echo "abcde error: no encoder found in the PATH" >&2
- echo "hits: are all dependencies installed? has the \$PATH been modified?" >&2
+ log error "no encoder found in the PATH"
+ log error "hints: are all dependencies installed? has the \$PATH been modified?"
exit 1
fi
fi
vorbis|ogg)
[ "$OGGENCODERSYNTAX" = "default" ] && OGGENCODERSYNTAX=oggenc
[ "$DOTAG" = "y" ] && NEEDCOMMENTER=y
- [ "$REPLAYGAIN" = "y" ] && NEEDVORBISGAIN=y
+ [ "$DOREPLAYGAIN" = "y" ] && NEEDVORBISGAIN=y
OGGOUTPUTCONTAINER=ogg
;;
mp3)
[ "$MP3ENCODERSYNTAX" = "default" ] && MP3ENCODERSYNTAX=lame
[ "$DOTAG" = "y" ] && NEEDTAGGER=y
+ [ "$DOREPLAYGAIN" = "y" ] && NEEDMP3GAIN=y
;;
flac)
[ "$FLACENCODERSYNTAX" = "default" ] && FLACENCODERSYNTAX=flac
- [ "$REPLAYGAIN" = "y" ] && NEEDMETAFLAC=y
[ "$DOTAG" = "y" ] && NEEDMETAFLAC=y
+ [ "$DOREPLAYGAIN" = "y" ] && NEEDMETAFLAC=y
;;
spx)
[ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc
+# [ "$DOREPLAYGAIN" = "y" ] &&
;;
mpc)
[ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc
+ [ "$DOREPLAYGAIN" = "y" ] && NEEDMPPGAIN=y
+ ;;
+ wav)
+ if [ "$KEEPWAVS" = "y" ]; then
+ vecho "Unsetting the KEEPWAVS option, since the resulting wav files were requested..."
+ fi
+ KEEPWAVS=move
;;
- *) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
+ *) log error "Invalid OUTPUTTYPE defined"
exit 1
;;
esac
MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$LAMEOPTS}"
MP3ENCODER="$LAME"
;;
+ toolame)
+ MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$TOOLAMEOPTS}"
+ MP3ENCODER="$TOOLAME"
+ ;;
gogo)
MP3ENCODEROPTS="${MP3ENCODEROPTSCLI:-$GOGOOPTS}"
MP3ENCODER="$GOGO"
FLACENCODER="$FLAC"
# FLAC streams can be encapsulated on a Ogg transport layer
if echo "$FLACENCODEROPTS" | egrep -q -- "(^| )--ogg($| )" ;then
- echo "abcde error: FLAC on an Ogg container is not yet supported" >&2
- echo " due to problem with adding comments to such files" >&2
+ log error "FLAC on an Ogg container is not yet supported"
+ log error "due to problem with adding comments to such files"
exit 1
FLACOUTPUTCONTAINER=ogg
else
TAGGEROPTS="$ID3V2OPTS"
fi
+# Specific for NOGAP is the use of lame. Another encoder fails...
+if [ "$NOGAP" = "y" ] && [ ! "$MP3ENCODER" = "lame" ]; then
+ log warning "the NOGAP option is specific of lame. Deactivating..."
+ NOGAP=n
+fi
+
# Options for mkcue
case "$CUEREADERSYNTAX" in
default|mkcue)
# Check if both OGGEOUTPUTCONTAINER and FLACOUTPUTCONTAINER are the same, and differentiante them
if [ X"$OGGOUTPUTCONTAINER" = "Xogg" ] && [ X"$FLACOUTPUTCONTAINER" = "Xogg" ]; then
- echo "abcde error: FLAC on an Ogg container is not yet supported" >&2
- echo " due to problem with adding comments to such files" >&2
+ log error "FLAC on an Ogg container is not yet supported"
+ log error "due to problem with adding comments to such files"
exit 1
OGGOUTPUTCONTAINER=ogg.ogg
FLACOUTPUTCONTAINER=flac.ogg
- vecho "abcde warning: modified file endings due to conflicting transport layers in Ogg/Vorbis and Ogg/FLAC"
+ vecho warning "modified file endings due to conflicting transport layers in Ogg/Vorbis and Ogg/FLAC"
fi
# Clean up nice options (either use '-n NICELEVEL or -NICELEVEL')
esac
fi
+###USEPIPESSUPPORT###
+
# Rippers with USEPIPE support
# FIXME # Include here all the rippers we can figure out support pipes
-PIPE_cdparanoia="-"
-PIPE_flac="-c "
+PIPERIPPER_cdparanoia="-"
+PIPERIPPER_debug="-"
+PIPERIPPER_flac="-c "
# Encoders with USEPIPE support
# FIXME # Include here all the encoders we can figure out support pipes
PIPE_lame="-"
PIPE_bladeenc="-"
PIPE_oggenc="-"
+PIPE_flac="-"
# Figure out if we can use pipes with the ripper/encoder combination
# exit otherwise
if [ "$USEPIPES" = "y" ]; then
- PIPERIPPERSVARCHECK="PIPE_${CDROMREADER}"
+ PIPERIPPERSVARCHECK="PIPERIPPER_${CDROMREADERSYNTAX}"
case "$OUTPUT" in
mp3)
PIPEENCODERSVARCHECK="PIPE_$MP3ENCODERSYNTAX" ;;
mpc)
PIPEENCODERSVARCHECK="PIPE_$MPPENCODER" ;;
esac
- if [ ! -n "$( eval echo "\$$PIPERIPPERSVARCHECK" )" ] ; then
- echo "abcde error: no support for pipes with given ripper" >&2
- echo "read the USEPIPES file from the source tarball to get help." >&2
- echo "On a Debian system, it is under /usr/share/doc/abcde/USEPIPES.gz" >&2
+ decho "PIPERIPPERSVARCHECK: $( eval echo "\$$PIPERIPPERSVARCHECK" )"
+ if [ "$( eval echo "\$$PIPERIPPERSVARCHECK" )" = "$" ] || \
+ [ "$( eval echo "\$$PIPERIPPERSVARCHECK" )" = "" ] ; then
+ log error "no support for pipes with given ripper"
+ log error "read the USEPIPES file from the source tarball to get help."
+ log error "On a Debian system, it is under /usr/share/doc/abcde/USEPIPES.gz"
exit 1;
fi
- if [ ! -n "$( eval echo "\$$PIPEENCODERSVARCHECK" )" ] ; then
- echo "abcde error: no support for pipes with given encoder" >&2
- echo "read the USEPIPES file from the source tarball to help" >&2
- echo "on a Debian system, read /usr/share/doc/abcde/USEPIPES.gz" >&2
+ decho "PIPEENCODERSVARCHECK: $( eval echo "\$$PIPEENCODERSVARCHECK" )"
+ if [ "$( eval echo "\$$PIPEENCODERSVARCHECK" )" = "$" ] || \
+ [ "$( eval echo "\$$PIPEENCODERSVARCHECK" )" = "" ] ; then
+ log error "no support for pipes with given encoder"
+ log error "read the USEPIPES file from the source tarball to help"
+ log error "on a Debian system, read /usr/share/doc/abcde/USEPIPES.gz"
exit 1;
fi
fi
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC} \
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT} \
${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED} \
- ${NEEDVORBISGAIN+$VORBISGAIN} ${NEEDCUEREADER+$CUEREADER} \
- ${NEEDCUE2DISCID+$CUE2DISCID}
+ ${NEEDVORBISGAIN+$VORBISGAIN} ${NEEDMP3GAIN+$MP3GAIN} \
+ ${NEEDMPPGAIN+$MPPGAIN} \
+ ${NEEDCUEREADER+$CUEREADER} ${NEEDCUE2DISCID+$CUE2DISCID}
do
# Cut off the command-line options we just added in
X=$(echo $X | cut -d' ' -f2)
if [ "$(which $X)" = "" ]; then
- echo "abcde error: $X is not in your path." >&2
+ log error "$X is not in your path." >&2
exit 1
elif [ ! -x $(which $X) ]; then
- echo "abcde error: $X is not executable." >&2
+ log error "$X is not executable." >&2
exit 1
fi
done
# And last but not least, check if we can diff between files
if [ -x $(which $DIFF) ]; then :; else
- vecho "[WAR] Disabling diff since we cannot find it in the \$PATH..."
+ vecho warning "Disabling diff since we cannot find it in the \$PATH..."
DIFF=""
fi
if [ "$ONETRACK" = "y" ]; then
TRACKS="$FIRSTTRACK"
if checkstatus readtrack-$FIRSTTRACK; then :; else
- do_cdread onetrack $FIRSTTRACK $LASTTRACK
+ if [ "$USEPIPES" = "y" ]; then
+ do_cdread onetrack $FIRSTTRACK $LASTTRACK | do_encode $FIRSTTRACK %local0% > /dev/null 2>&1
+ else
+ do_cdread onetrack $FIRSTTRACK $LASTTRACK
+ fi
fi
else
for UTRACKNUM in $TRACKQUEUE
fi
fi
fi
- if [ "$BATCH" = "y" ]; then
+ if [ "$NOGAP" = "y" ] || [ "$BATCHNORM" = "y" ]; then
:
else
+ # If we are not reading, set the encode output to loud already, so
+ # that we can see the output of the first track.
+ if [ "$MAXPROCS" = "1" ] && [ ! "$DOREAD" = "y" ]; then
+ echo "encode-output=loud" >> "$ABCDETEMPDIR/status"
+ fi
echo NEXTTRACK # Get the encoder machine churning again
if [ "$DOREAD" = "y" ]; then
if [ "$LOWDISK" = "y" ] && [ "$DOENCODE" = "y" ]; then
fi
# All tracks read, start encoding.
-if [ "$BATCH" = "y" ] || [ "$ONETRACK" = "y" ]; then
+if [ "$NOGAP" = "y" ] || [ "$BATCHNORM" = "y" ] || [ "$ONETRACK" = "y" ]; then
echo NEXTTRACK
fi
#
#) | (
-# In batch mode, we want all tracks to be read first.
-if [ "$BATCH" = "y" ]; then
+# In BATCHNORM and/or NOGAP modes, we want all tracks to be read first.
+#BACK
+if [ "$BATCHNORM" = "y" ] || [ "$NOGAP" = "y" ]; then
read GOAHEAD # For blocking - will contain either "NO" or "NEXTTRACK"
if [ "$GOAHEAD" = "NO" ]; then break; fi
for LASTTRACK in $TRACKQUEUE; do :; done
if checkstatus readtrack-$LASTTRACK; then
- if [ "$DONORMALIZE" = "y" ]; then
+ if [ "$DONORMALIZE" = "y" ] && [ "$BATCHNORM" = "y" ]; then
if checkstatus normalizetrack-$LASTTRACK; then :; else do_batch_normalize; fi
- if checkerrors batch-normalize; then exit; fi
+ if checkerrors batch-normalize; then exit 1; fi
fi
- if [ "$DOENCODE" = "y" ]; then
- if checkstatus encodetrack-$LASTTRACK; then :; else do_batch_encode; fi
- if checkerrors batch-encode; then exit; fi
+ if [ "$DOENCODE" = "y" ] && [ "$NOGAP" = "y" ]; then
+ if [ "$DONORMALIZE" = "y" ]; then
+ for UTRACKNUM in $TRACKQUEUE
+ do
+ if checkstatus readtrack-$UTRACKNUM; then
+ if checkstatus normalizetrack-$UTRACKNUM; then :; else do_normalize $UTRACKNUM; fi
+ fi
+ done
+ fi
+ if checkstatus encodetrack-$LASTTRACK; then :; else do_nogap_encode; fi
+ if checkerrors nogap-encode; then exit 1; fi
fi
fi
fi
TRACKNUM="$FIRSTTRACK"
splitvarious
else
-# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- #TRACKNAME="$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d \[:cntrl:\] | sed 's/\ \+$//')"
do_getcddbinfo TRACKNAME
splitvarious
fi
fi
# If the above didn't catch the stragglers, this will
wait
-if [ "$REPLAYGAIN" = "y" ]; then
+if [ "$DOREPLAYGAIN" = "y" ]; then
do_replaygain
fi
+
# Check to see if run_command logged any errors
if [ -f "$ABCDETEMPDIR/errors" ]; then
- echo "The following commands failed to run:"
+ log error "The following commands failed to run:"
cat "$ABCDETEMPDIR/errors"
# Don't clean up
DOCLEAN=n
# Don't clean up
DOCLEAN=n
fi
+# Check if we have moved all the formats we had previously encoded, if we are not using the FORCE.
+if [ "$DOCLEAN" = "y" ] && [ ! "$FORCE" = "y" ]; then
+ ENCODED_FORMATS=$(egrep "^encodetrack-(.{3,6})-(.{1,2})$" "$ABCDETEMPDIR/status" | cut -d"-" -f2 | sort -u | tr '\n' '|')
+ MOVED_FORMATS=$(egrep "^movetrack-output-(.{3,6})$" "$ABCDETEMPDIR/status" | cut -d"-" -f3 | sort -u | tr '\n' '|')
+ if [ "$ENCODED_FORMATS" != "$MOVED_FORMATS" ]; then
+ log warning "The encoded formats does not match with the moved ones"
+ log warning "Formats encoded: $( echo $ENCODED_FORMATS | tr "|" " " )"
+ log warning "Formats moved: $( echo $MOVED_FORMATS | tr "|" " " )"
+ log warning "Use \"abcde -a clean -f -C $DISCID\" to force the removal of the remaining data."
+ DOCLEAN=n
+ fi
+fi
if [ "$DOCLEAN" = "y" ]; then
# Wipe all the evidence
# Gimme gimme gimme some more time!