From: Clinton Ebadi <clinton@unknownlamer.org>
Date: Sat, 29 Aug 2015 17:54:06 +0000 (-0400)
Subject: Adapter from makerfarm x-carriage to wilson x-carriage
X-Git-Url: http://git.hcoop.net/clinton/3d-models.git/commitdiff_plain/f9a12374ed46963b34ba5244addf5df1e43e6dae?ds=sidebyside

Adapter from makerfarm x-carriage to wilson x-carriage

Needs work.
---

diff --git a/carriage adapter/itty-wilson.scad b/carriage adapter/itty-wilson.scad
new file mode 100644
index 0000000..75cbb6c
--- /dev/null
+++ b/carriage adapter/itty-wilson.scad	
@@ -0,0 +1,125 @@
+/*
+min y = 0
+max y = 100
+min x = 1205
+max x = 1254
+
+Makerfair X carriage plate adapter for the Wilson RepRap.
+Copyright (c) 2015 Clinton Ebadi <clinton@unknownlamer.org>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Measurements reverse engineered from
+https://github.com/RickSisco/MakerFarm-Prusa-i3v-12-Inch
+
+Intended for use with the itty bitty dual extruder series.
+
+Source needs a good cleanup. Evil loops that don't take advantage of
+the geometry of the object abound.
+
+*/
+
+use <MCAD/nuts_and_bolts.scad>
+
+carriage_height = 65;
+
+plate_width = 75; // wilson carriage is only 50mm wide!
+plate_depth = 8; // wilson default depth = 8, makerfarm = 6
+
+plate_cut_height = 6.5;
+plate_cut_width = 6;
+plate_cut_distance = 13;
+plate_cut_center = 25.1;
+plate_cut_y_offset = 27;
+plate_cut_bolt = 3;
+plate_cut_x_bolt_offset = 10.5 + plate_cut_bolt / 2;
+
+plate_height = carriage_height + plate_cut_height + plate_cut_y_offset; //100;
+
+lower_cut_y_offset = 5.33; // 5.325 in CAD
+lower_bolt_x_offset = 1.5 + plate_cut_bolt / 2;
+lower_bolt_y_offset = 3.275 + plate_cut_bolt / 2;
+
+carriage_bolt = 4;
+carriage_hole_spacing = 24;
+carriage_clearance = 20; // holes are 20mm from bottom of plate
+carriage_y_offset =  plate_cut_y_offset + plate_cut_height + carriage_clearance;
+carriage_nut_depth = 2 * 3.2 + 0.1; // m4 nut depth + tolerance
+
+corner_radius = 3; // round off the corners to make it look nicer
+
+bump_strip = false; // generate holes to mount a strip to hit the end stop -- experimental / bad code
+
+module plate_outline () {
+     $fn = 16;
+      difference () {
+	   minkowski () {
+		translate ([corner_radius, corner_radius, 0])
+		     square ([plate_width - corner_radius*2, plate_height - corner_radius*2]);
+		circle (r = corner_radius);
+	   }
+
+	  // upper plate mount
+	  translate ([0, plate_cut_y_offset, 0]) {
+	       for (x = [-0.01, plate_cut_width + plate_cut_distance, plate_cut_width*2 + plate_cut_distance + plate_cut_center, plate_cut_width*3 + plate_cut_distance*2 + plate_cut_center + 0.01])
+		    translate ([x, 0, 0]) square ([plate_cut_width, plate_cut_height]);
+
+	       // looks like the bolt is at the midpoint between the cut outs
+	       for (x = [plate_cut_x_bolt_offset, plate_width - plate_cut_x_bolt_offset])
+		    translate ([x, plate_cut_height / 2, 0]) circle (d = plate_cut_bolt, $fn = 16);
+	  }
+
+	  // lower plate mount
+	  translate ([0, lower_cut_y_offset, 0]) {
+	       for (x = [-0.01, plate_width - plate_cut_width + 0.01]) {
+		    // lower cut out is closer to 6mm than 6.5mm in cad drawings
+		    translate ([x, -0.01, 0]) square ([plate_cut_width, plate_cut_height - 0.5]);
+	       }
+	       // I think the intention is for the screw holes to be centered over the cut out
+	       for (x = [lower_bolt_x_offset, plate_width - lower_bolt_x_offset])
+		    translate ([x, plate_cut_height + lower_bolt_y_offset, 0]) circle (d = plate_cut_bolt, $fn = 16);
+	  }
+
+	  // mount to wilson x-carriage
+	  translate ([(plate_width - carriage_hole_spacing) / 2, carriage_y_offset, 0])
+	       for (x = [0, carriage_hole_spacing], y = [0, carriage_hole_spacing]) {
+		    translate ([x, y, 0]) circle (d = carriage_bolt, $fn = 16);
+	       }
+
+	  if (bump_strip) {
+	       translate ([6, carriage_y_offset, 0])
+		    for (y = [0, carriage_hole_spacing]) {
+			 translate ([0, y, 0]) circle (d = carriage_bolt, $fn = 16);
+		    }
+	  }
+     }
+}
+
+difference () {
+     linear_extrude (height = plate_depth, convexity = 50) plate_outline ();
+     // after extruding, cut out spaces for M4 hex nuts (6 - 6.5mm deep, for two nuts)
+     translate ([(plate_width - carriage_hole_spacing) / 2, carriage_y_offset, plate_depth - carriage_nut_depth]) {
+	  for (x = [0, carriage_hole_spacing], y = [0, carriage_hole_spacing]) {
+	       translate ([x, y, 0]) linear_extrude (height = carriage_nut_depth + 0.01) nutHole (size = carriage_bolt, proj = 1);
+	  }
+     }
+
+     if (bump_strip) {
+	  translate ([6, carriage_y_offset, plate_depth - carriage_nut_depth/2]) {
+	       for (y = [0, carriage_hole_spacing]) {
+		    translate ([0, y, 0]) linear_extrude (height = carriage_nut_depth/2 + 0.01) nutHole (size = carriage_bolt, proj = 1);
+	       }
+	  }
+     }
+}