From: Clinton Ebadi <clinton@unknownlamer.org>
Date: Sat, 11 Mar 2017 02:30:39 +0000 (-0500)
Subject: power supply: loosen power socket mount
X-Git-Url: http://git.hcoop.net/clinton/3d-models.git/commitdiff_plain/c8e2242ae74d5c463404a84e271eae5f93c473ca

power supply: loosen power socket mount

Tolerance was too close and edges had to be filed down. Socket can be
a bit loose since it has both a snap in connector and mounting bolts.

One defect: it's pretty impossible to use the bolt hole nearest the
faceplate. Haven't had issues just using one.
---

diff --git a/etc/meanwell_supply_cover.scad b/etc/meanwell_supply_cover.scad
index f55d6a3..19329d8 100644
--- a/etc/meanwell_supply_cover.scad
+++ b/etc/meanwell_supply_cover.scad
@@ -115,8 +115,8 @@ module powerSocket(width = 1.06*25.4, height = 1.56*25.4, screw_distance = 1.42*
       translate([0,-screw_distance/2,-5]) { rotate ([0, 0, 90]) cslot (3, 5, 22); }
       translate([0,0,-5.5 - 1.5])
         minkowski() {
-          cube([height-8,width-8,11], center=true);
-          cylinder(r=4,h=0.1);
+          #cube([height-8,width-8,11], center=true);
+          cylinder(r=4.5,h=0.1);
       }
     }
   }