--- /dev/null
+/* Customizable Clip for mounting strip LEDs
+ Copyright (c) 2015 Clinton Ebadi <clinton@unknownlamer.org>
+
+ This program is free software: you can redistribute it and/or
+ modify it under the terms of the GNU General Public License as
+ published by the Free Software Foundation, either version 3 of the
+ License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see
+ <http://www.gnu.org/licenses/>.
+*/
+
+// TODO:
+// - make this a module
+
+use <MCAD/teardrop.scad>
+
+// All lengths in mm
+
+wall_height = 4; // How tall should the wall be?
+wall_width = 3.2; // How thick should the walls be at their base?
+extra_wall_height = 10; // How tall should the horizontal mounting tab be? 0 = no tab.
+
+base_height = 2.5; // Thickness of the base
+base_length = 30; // Length of the clip
+
+strip_width = 10; // Width of LED strip
+
+hole_radius = 2; // Size of mounting holes
+
+x_midpoint = (wall_width*2 + strip_width) / 2;
+
+difference () {
+ rotate([90,0,0]) {
+ linear_extrude(height = base_length) {
+ translate ([0, wall_height + base_height, 0]) square([wall_width, extra_wall_height]);
+ difference () {
+ square ([wall_width * 2 + strip_width, wall_height + base_height]);
+ polygon (points = [[wall_width, base_height], [wall_width + strip_width, base_height],
+ [(wall_width*2 + strip_width) / 2, (wall_height + base_height) * 3]],
+ paths = [[0, 1, 2]]);
+ }
+ }
+
+ }
+ translate ([x_midpoint, -base_length / 2, -0.1]) cylinder (h = base_height + 0.2, r = hole_radius, $fn = 20);
+ translate([0.1, -base_length/2, (base_height + wall_height + extra_wall_height) - hole_radius*2 ]) teardrop (radius = hole_radius, length = wall_width*2 + 0.2, angle = 90);
+
+}
+