acorn: v0
[clinton/3d-models.git] / calibration / cube-ooze.scad
1 // quick hack to test linear pressure advance with a side of mild
2 // retraction torture
3
4 d = 30;
5
6 translate ([d,0,0]) cube (d);
7
8 translate ([-d-10,0,0]) cube ([d/3, d, d]);
9
10 translate ([-d-10,-d*2,0]) cube (d/2);
11 translate ([d+15,-d*2,0]) cube (d/4);
12
13 /*
14
15
16 try 2mm retract (then 35mm/s?)
17 2mm jammed
18 35mm/s jammed even with R2000 and 5.0 ejerk
19
20 M905 K50
21 M204 T2000 P500 R3000
22 M205 X8.0
23
24 M905 K50
25 M204 T2000 P500 R2000
26 M205 X12.0 E5.0
27
28 M905 K50
29 M204 T2000 P500 R3000
30 M205 X12.0 E5.0
31
32 next bump ejerk if needed
33 R3000 = boom
34
35 M905 K50
36 M204 T2000 P500 R2000
37 M205 X12.0 E10.0
38
39 everything fucking sucks
40 M905 K50
41 M204 T2000 P500 R2000
42 M205 X12.0 E5.0
43
44 seriously
45 M905 K0
46 M204 T2000 P500 R3000
47 M205 X12.0 E10.0
48
49 round 2:
50
51 - ooze test 35mm/s 1.5mm retract with solid green and K50. Fail or
52 succeed does not matter, just need a reference for "it can work" or
53 "fail expected"
54 - several ooze test models with K0 and atomic filament
55 - Try R2000, 25mm/s 1.5mm, E10.0. Reduce jerk, then accel if needed
56 - Try R3000 (if it works), 35mm/s 1.5mm
57 - Intermediate retract speeds if required
58
59 initial result: both did ooze test @ max. plain green filament does
60 robot at most brutal 1.5mm settings without issues...
61
62 M203 E35.0
63 M204 T2000 P500 R3000
64 M205 X15.0 E10.0
65 M905 K50
66
67
68
69 M203 E35.0
70 M204 T2000 P500 R3000
71 M205 X12.0 E10.0
72 M905 K50
73
74 */