| 1 | // quick hack to test linear pressure advance with a side of mild |
| 2 | // retraction torture |
| 3 | |
| 4 | d = 30; |
| 5 | |
| 6 | translate ([d,0,0]) cube (d); |
| 7 | |
| 8 | translate ([-d-10,0,0]) cube ([d/3, d, d]); |
| 9 | |
| 10 | translate ([-d-10,-d*2,0]) cube (d/2); |
| 11 | translate ([d+15,-d*2,0]) cube (d/4); |
| 12 | |
| 13 | /* |
| 14 | |
| 15 | |
| 16 | try 2mm retract (then 35mm/s?) |
| 17 | 2mm jammed |
| 18 | 35mm/s jammed even with R2000 and 5.0 ejerk |
| 19 | |
| 20 | M905 K50 |
| 21 | M204 T2000 P500 R3000 |
| 22 | M205 X8.0 |
| 23 | |
| 24 | M905 K50 |
| 25 | M204 T2000 P500 R2000 |
| 26 | M205 X12.0 E5.0 |
| 27 | |
| 28 | M905 K50 |
| 29 | M204 T2000 P500 R3000 |
| 30 | M205 X12.0 E5.0 |
| 31 | |
| 32 | next bump ejerk if needed |
| 33 | R3000 = boom |
| 34 | |
| 35 | M905 K50 |
| 36 | M204 T2000 P500 R2000 |
| 37 | M205 X12.0 E10.0 |
| 38 | |
| 39 | everything fucking sucks |
| 40 | M905 K50 |
| 41 | M204 T2000 P500 R2000 |
| 42 | M205 X12.0 E5.0 |
| 43 | |
| 44 | seriously |
| 45 | M905 K0 |
| 46 | M204 T2000 P500 R3000 |
| 47 | M205 X12.0 E10.0 |
| 48 | |
| 49 | round 2: |
| 50 | |
| 51 | - ooze test 35mm/s 1.5mm retract with solid green and K50. Fail or |
| 52 | succeed does not matter, just need a reference for "it can work" or |
| 53 | "fail expected" |
| 54 | - several ooze test models with K0 and atomic filament |
| 55 | - Try R2000, 25mm/s 1.5mm, E10.0. Reduce jerk, then accel if needed |
| 56 | - Try R3000 (if it works), 35mm/s 1.5mm |
| 57 | - Intermediate retract speeds if required |
| 58 | |
| 59 | initial result: both did ooze test @ max. plain green filament does |
| 60 | robot at most brutal 1.5mm settings without issues... |
| 61 | |
| 62 | M203 E35.0 |
| 63 | M204 T2000 P500 R3000 |
| 64 | M205 X15.0 E10.0 |
| 65 | M905 K50 |
| 66 | |
| 67 | |
| 68 | |
| 69 | M203 E35.0 |
| 70 | M204 T2000 P500 R3000 |
| 71 | M205 X12.0 E10.0 |
| 72 | M905 K50 |
| 73 | |
| 74 | */ |