pacman-ghost: make tea light parameters global
[clinton/3d-models.git] / pacman-ghost / pacman-ghost.scad
CommitLineData
c9a67c51
CE
1//
2// Pacman Ghost
3// ------------
4//
5// Created by Joao Alves (jpralves@gmail.com)
9080b73a 6// Tea Light added by Clinton Ebadi <clinton@unknownlamer.org>
61ee1453 7// Pac Guy model by Fry Hyde (https://www.thingiverse.com/thing:612888)
c9a67c51
CE
8// ------------------------------------------
9//
10// Parameters:
11
c9a67c51 12// Figure diameter
9080b73a
CE
13ghost_diameter = 50; // [25:5:100]
14pacguy_diameter = ghost_diameter * 1.5;
c9a67c51 15
9080b73a 16height = ghost_diameter*0.65;
c9a67c51
CE
17// Add keychain
18key_chain = 0; // [1:On, 0:Off]
19// Add LED hole
9080b73a
CE
20led_hole = 0; // [0:Off, 5:5mm, 8:8mm, 10:10mm]
21// Add tea light holder
22tea_light = true;
23
24// Render Ghost
25ghost = true;
26// Render Pac Guy
623e1176 27pacguy = false;
c9a67c51
CE
28
29// Detail
9080b73a
CE
30$fa=4; // [20:Low Res, 10:Normal Res, 4:Hi Res]
31
623e1176
CE
32// [Tea Light]
33base_diameter = 30;
34base_height = 16.2;
35bulb_diameter = 9;
36
9080b73a
CE
37/* [Hidden] */
38$fs=0.1;
39
40module ghost() {
41 difference () {
42 union() {
43 cylinder(d = ghost_diameter, h = height);
44 translate([0, 0, height]) sphere(d = ghost_diameter);
45 if (key_chain == 1) {
46 translate([0, 0, height+ghost_diameter/2])
47 rotate([0, 90, 0])
48 rotate_extrude()
49 translate([4, 0, 0])
50 circle(r = 1.5);
51 }
52 }
53 translate([ghost_diameter/2, -ghost_diameter/4, height])
54 sphere(d = ghost_diameter/3.5);
55 translate([ghost_diameter/2, ghost_diameter/4, height])
56 sphere(d = ghost_diameter/3.5);
57 translate([0, 0, -0.1])
58 for(a = [0:11]) {
59 rotate([a/12*360,-90,0])
60 scale([1.5,1,1])
61 translate([0,0,ghost_diameter/12.5])
62 cylinder(ghost_diameter, 0,ghost_diameter/25*6.5, $fn=4);
63 }
64 }
65}
66
67module led_hole (led_d = led_hole, led_h = 0) {
68 // led_h==0 auto-sets height, openscad can't reference other
69 // arguments so this abomination arises
70 led_h = led_h ? led_h : height - (led_d+2);
71
72 union() {
73 cylinder(d = led_d+2, h = led_h);
74 translate([0, 0, led_h]) sphere(d = led_d+2);
75 }
76}
77
78module tea_light_base () {
9080b73a
CE
79 difference () {
80 union () {
81 cylinder (d = base_diameter + 1, h = base_height + 1);
623e1176 82 led_hole (led_d = bulb_diameter, led_h = base_height+8);
9080b73a 83 }
9080b73a
CE
84 }
85
86}
87
88module pacguy () {
89 // original model ghost_diameter is 30.464mm, scale to 1mm and then to
90 // final ghost_diameter. z is slightly smaller due to bottom being cut
91 // flat.
92 s = 1 / 30.464 * pacguy_diameter;
93 scale ([s, s, s]) translate ([0, 0, 28.742 / 2]) import ("PacGuy.stl", convexity=10);
94}
95
96module subtract_led () {
97 difference () {
98 children ();
99 if (led_hole > 0) led_hole ();
100 if (tea_light) tea_light_base ();
101 }
102}
103if (ghost) {
104 subtract_led () {
105 rotate ([0, 0, -90]) ghost ();
106 }
107}
108
109if (pacguy) {
110 translate ([ ghost ? (ghost_diameter + pacguy_diameter) / 2 + 10 : 0, 0, 0]) subtract_led () {
111 pacguy ();
112 }
113}