Guile NEWS --- history of user-visible changes. -*- text -*-
-Copyright (C) 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
See the end for copying conditions.
Please send Guile bug reports to bug-guile@gnu.org.
* Changes to the distribution
-** New modules (oop goops) etc
+** New module (ice-9 stack-catch):
-The new modules
+stack-catch is like catch, but saves the current state of the stack in
+the the-last-stack fluid for the debugger to inspect or in able to
+re-throw an error.
+
+** The module (ice-9 and-let*) has been renamed to (ice-9 and-let-star)
+
+This has been done to prevent problems on lesser operating systems
+that can't tolerate `*'s in file names. The exported macro continues
+to be named `and-let*', of course.
+
+On systems that support it, there is also a compatability module named
+(ice-9 and-let*). It will go away in the next release.
+
+** New modules (oop goops) etc.:
(oop goops)
(oop goops describe)
(oop goops active-slot)
(oop goops composite-slot)
-plus some GOOPS utility modules have been added.
-
-* Changes to the stand-alone interpreter
-
-** GOOPS has been merged into Guile
-
-The Guile Object Oriented Programming System has been integrated into
-Guile.
+The Guile Object Oriented Programming System (GOOPS) has been
+integrated into Guile.
Type
See further in the GOOPS tutorial available in the guile-doc
distribution in info (goops.info) and texinfo formats.
+** New module (ice-9 rdelim).
+
+This exports the following procedures which were previously defined
+in the default environment:
+
+read-line read-line! read-delimited read-delimited! %read-delimited!
+%read-line write-line
+
+For backwards compatibility the definitions are still imported into the
+default environment in this version of Guile. However you should add:
+
+(use-modules (ice-9 rdelim))
+
+to any program which uses the definitions, since this may change in
+future.
+
+Alternatively, if guile-scsh is installed, the (scsh rdelim) module
+can be used for similar functionality.
+
+** New module (ice-9 match)
+
+This module includes Andrew K. Wright's pattern matcher:
+
+(use-modules (ice-9 match))
+
+(match '(+ 1 2)
+ (('+ x) x)
+ (('+ x y) `(add ,x ,y))
+ (('- x y) `(sub ,x ,y))) => (add 1 2)
+
+See ice-9/match.scm for brief description or
+http://www.star-lab.com/wright/code.html for complete documentation.
+
+This module requires SLIB to be installed and available from Guile.
+
+* Changes to the stand-alone interpreter
+
+** Evaluation of "()", the empty list, is now an error.
+
+Previously, you could for example write (cons 1 ()); now you need to
+be more explicit and write (cons 1 '()).
+
** It's now possible to create modules with controlled environments
Example:
* Changes to Scheme functions and syntax
-** The semantics of guardians has changed.
-
-The changes are for the most part compatible. An important criteria
+** The module system has been made more disciplined.
+
+The function `eval' will now save and restore the current module
+around the evaluation of the specified expression. While this
+expression is evaluated, `(current-module)' will now return the right
+module, which is the module specified as the second argument to
+`eval'.
+
+A consequence of this change is that `eval' is not particularily
+useful when you want allow the evaluated code to change what module is
+designated as the current module and have this change persist from one
+call to `eval' to the next. The read-eval-print-loop is an example
+where `eval' is now inadequate. To compensate, there is a new
+function `primitive-eval' that does not take a module specifier and
+that does not save/restore the current module. You should use this
+function together with `set-current-module', `current-module', etc
+when you want to have more control over the state that is carried from
+one eval to the next.
+
+Additionally, it has been made sure that forms that are evaluated at
+the top level are always evaluated with respect to the current module.
+Previously, subforms of top-level forms such as `begin', `case',
+etc. did not respect changes to the current module although these
+subforms are at the top-level as well.
+
+To prevent strange behaviour, the forms `define-module',
+`use-modules', `use-syntax', and `export' have been restricted to only
+work on the top level. The forms `define-public' and
+`defmacro-public' only export the new binding on the top level. They
+behave just like `define' and `defmacro', respectively, when they are
+used in a lexical environment.
+
+** `port-for-each' makes an additional guarantee.
+
+From the docstring: @var{proc} is applied exactly once to every port
+that exists in the system at the time @var{port-for-each} is invoked.
+Changes to the port table while @var{port-for-each} is running have no
+effect as far as @var{port-for-each} is concerned.
+
+This guarantee is important to make (ice-9 popen) work reliable.
+
+** The semantics of guardians have changed.
+
+The changes are for the most part compatible. An important criterion
was to keep the typical usage of guardians as simple as before, but to
make the semantics safer and (as a result) more useful.
Instead, use scm_c_memq or scm_memq, scm_memv, scm_member.
+** New function: read-string!/partial str [port_or_fdes [start [end]]]
+
+ Read characters from an fport or file descriptor into a string
+ STR. This procedure is scsh-compatible and can efficiently read
+ large strings. It will:
+
+ * attempt to fill the entire string, unless the START and/or
+ END arguments are supplied. i.e., START defaults to 0 and
+ END defaults to `(string-length str)'
+
+ * use the current input port if PORT_OR_FDES is not supplied.
+
+ * read any characters that are currently available, without
+ waiting for the rest (short reads are possible).
+
+ * wait for as long as it needs to for the first character to
+ become available, unless the port is in non-blocking mode
+
+ * return `#f' if end-of-file is encountered before reading any
+ characters, otherwise return the number of characters read.
+
+ * return 0 if the port is in non-blocking mode and no characters
+ are immediately available.
+
+ * return 0 if the request is for 0 bytes, with no end-of-file
+ check
+
** New function: port? X
Returns a boolean indicating whether X is a port. Equivalent to
`(or (input-port? X) (output-port? X))'.
+** New function: file-port?
+
+Determines whether a given object is a port that is related to a file.
+
** New function: port-for-each proc
Apply PROC to each port in the Guile port table in turn. The
descriptor OLDFD to descriptor number NEWFD, replacing the
previous meaning of NEWFD. Both OLDFD and NEWFD must be integers.
Unlike for dup->fdes or primitive-move->fdes, no attempt is made
-to move away ports which are using NEWFD\n". The return value is
+to move away ports which are using NEWFD. The return value is
unspecified.
** New function: close-fdes fd
There is no such concept as a weak binding any more.
-** Removed constants: bignum-radix
+** Removed constants: bignum-radix, scm-line-incrementors
* Changes to the gh_ interface
* Changes to the scm_ interface
+** New function: scm_c_read (SCM port, void *buffer, scm_sizet size)
+
+Used by an application to read arbitrary number of bytes from a port.
+Same semantics as libc read, except that scm_c_read only returns less
+than SIZE bytes if at end-of-file.
+
+Warning: Doesn't update port line and column counts!
+
+** New function: scm_c_write (SCM port, const void *ptr, scm_sizet size)
+
+Used by an application to write arbitrary number of bytes to an SCM
+port. Similar semantics as libc write. However, unlike libc
+write, scm_c_write writes the requested number of bytes and has no
+return value.
+
+Warning: Doesn't update port line and column counts!
+
** New function: scm_init_guile ()
In contrast to scm_boot_guile, scm_init_guile will return normally
Use instead of SCM_COERCE_SUBSTR.
+** New macros: SCM_DIR_OPEN_P, SCM_DIR_FLAG_OPEN
+
+For directory objects, use these instead of SCM_OPDIRP and SCM_OPN.
+
** Deprecated macros: SCM_OUTOFRANGE, SCM_NALLOC, SCM_HUP_SIGNAL,
SCM_INT_SIGNAL, SCM_FPE_SIGNAL, SCM_BUS_SIGNAL, SCM_SEGV_SIGNAL,
SCM_ALRM_SIGNAL, SCM_GC_SIGNAL, SCM_TICK_SIGNAL, SCM_SIG_ORD,
SCM_SUBSTRP, SCM_SUBSTR_STR, SCM_SUBSTR_OFFSET, SCM_COERCE_SUBSTR,
SCM_ROSTRINGP, SCM_RWSTRINGP, SCM_VALIDATE_RWSTRING, SCM_ROCHARS,
SCM_ROUCHARS, SCM_SETLENGTH, SCM_SETCHARS, SCM_LENGTH_MAX, SCM_GC8MARKP,
-SCM_SETGC8MARK, SCM_CLRGC8MARK, SCM_GCTYP16, SCM_GCCDR, SCM_SUBR_DOC
+SCM_SETGC8MARK, SCM_CLRGC8MARK, SCM_GCTYP16, SCM_GCCDR, SCM_SUBR_DOC,
+SCM_OPDIRP, SCM_VALIDATE_OPDIR
Use SCM_ASSERT_RANGE or SCM_VALIDATE_XXX_RANGE instead of SCM_OUTOFRANGE.
Use scm_memory_error instead of SCM_NALLOC.
Use SCM_CLRGCMARK instead of SCM_CLRGC8MARK.
Use SCM_TYP16 instead of SCM_GCTYP16.
Use SCM_CDR instead of SCM_GCCDR.
+Use SCM_DIR_OPEN_P instead of SCM_OPDIRP.
** Removed function: scm_struct_init
HCoop / bpt / guile.git / blobdiff