Guile NEWS --- history of user-visible changes. -*- text -*-
-Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+Copyright (C) 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
See the end for copying conditions.
-Please send Guile bug reports to bug-guile@prep.ai.mit.edu.
+Please send Guile bug reports to bug-guile@gnu.org.
\f
-Changes since Guile 1.2:
+Changes since Guile 1.3.4:
+
+\f
+Changes since Guile 1.3.2:
+
+* Changes to the stand-alone interpreter
+
+** Debugger
+
+An initial version of the Guile debugger written by Chris Hanson has
+been added. The debugger is still under development but is included
+in the distribution anyway since it is already quite useful.
+
+Type
+
+ (debug)
+
+after an error to enter the debugger. Type `help' inside the debugger
+for a description of available commands.
+
+If you prefer to have stack frames numbered and printed in
+anti-chronological order and prefer up in the stack to be down on the
+screen as is the case in gdb, you can put
+
+ (debug-enable 'backwards)
+
+in your .guile startup file. (However, this means that Guile can't
+use indentation to indicate stack level.)
+
+The debugger is autoloaded into Guile at the first use.
+
+** Further enhancements to backtraces
+
+There is a new debug option `width' which controls the maximum width
+on the screen of printed stack frames. Fancy printing parameters
+("level" and "length" as in Common LISP) are adaptively adjusted for
+each stack frame to give maximum information while still fitting
+within the bounds. If the stack frame can't be made to fit by
+adjusting parameters, it is simply cut off at the end. This is marked
+with a `$'.
+
+** Some modules are now only loaded when the repl is started
+
+The modules (ice-9 debug), (ice-9 session), (ice-9 threads) and (ice-9
+regex) are now loaded into (guile-user) only if the repl has been
+started. The effect is that the startup time for scripts has been
+reduced to 30% of what it was previously.
+
+Correctly written scripts load the modules they require at the top of
+the file and should not be affected by this change.
+
+** Hooks are now represented as smobs
+
+* Changes to Scheme functions and syntax
+
+** Readline support has changed again.
+
+The old (readline-activator) module is gone. Use (ice-9 readline)
+instead, which now contains all readline functionality. So the code
+to activate readline is now
+
+ (use-modules (ice-9 readline))
+ (activate-readline)
+
+This should work at any time, including from the guile prompt.
+
+To avoid confusion about the terms of Guile's license, please only
+enable readline for your personal use; please don't make it the
+default for others. Here is why we make this rather odd-sounding
+request:
+
+Guile is normally licensed under a weakened form of the GNU General
+Public License, which allows you to link code with Guile without
+placing that code under the GPL. This exception is important to some
+people.
+
+However, since readline is distributed under the GNU General Public
+License, when you link Guile with readline, either statically or
+dynamically, you effectively change Guile's license to the strict GPL.
+Whenever you link any strictly GPL'd code into Guile, uses of Guile
+which are normally permitted become forbidden. This is a rather
+non-obvious consequence of the licensing terms.
+
+So, to make sure things remain clear, please let people choose for
+themselves whether to link GPL'd libraries like readline with Guile.
+
+** regexp-substitute/global has changed slightly, but incompatibly.
+
+If you include a function in the item list, the string of the match
+object it receives is the same string passed to
+regexp-substitute/global, not some suffix of that string.
+Correspondingly, the match's positions are relative to the entire
+string, not the suffix.
+
+If the regexp can match the empty string, the way matches are chosen
+from the string has changed. regexp-substitute/global recognizes the
+same set of matches that list-matches does; see below.
+
+** New function: list-matches REGEXP STRING [FLAGS]
+
+Return a list of match objects, one for every non-overlapping, maximal
+match of REGEXP in STRING. The matches appear in left-to-right order.
+list-matches only reports matches of the empty string if there are no
+other matches which begin on, end at, or include the empty match's
+position.
+
+If present, FLAGS is passed as the FLAGS argument to regexp-exec.
+
+** New function: fold-matches REGEXP STRING INIT PROC [FLAGS]
+
+For each match of REGEXP in STRING, apply PROC to the match object,
+and the last value PROC returned, or INIT for the first call. Return
+the last value returned by PROC. We apply PROC to the matches as they
+appear from left to right.
+
+This function recognizes matches according to the same criteria as
+list-matches.
+
+Thus, you could define list-matches like this:
+
+ (define (list-matches regexp string . flags)
+ (reverse! (apply fold-matches regexp string '() cons flags)))
+
+If present, FLAGS is passed as the FLAGS argument to regexp-exec.
+
+** Hooks
+
+*** New function: hook? OBJ
+
+Return #t if OBJ is a hook, otherwise #f.
+
+*** New function: make-hook-with-name NAME [ARITY]
+
+Return a hook with name NAME and arity ARITY. The default value for
+ARITY is 0. The only effect of NAME is that it will appear when the
+hook object is printed to ease debugging.
+
+*** New function: hook-empty? HOOK
+
+Return #t if HOOK doesn't contain any procedures, otherwise #f.
+
+*** New function: hook->list HOOK
+
+Return a list of the procedures that are called when run-hook is
+applied to HOOK.
+
+** `map' signals an error if its argument lists are not all the same length.
+
+This is the behavior required by R5RS, so this change is really a bug
+fix. But it seems to affect a lot of people's code, so we're
+mentioning it here anyway.
+
+** Print-state handling has been made more transparent
+
+Under certain circumstances, ports are represented as a port with an
+associated print state. Earlier, this pair was represented as a pair
+(see "Some magic has been added to the printer" below). It is now
+indistinguishable (almost; see `get-print-state') from a port on the
+user level.
+
+*** New function: port-with-print-state OUTPUT-PORT PRINT-STATE
+
+Return a new port with the associated print state PRINT-STATE.
+
+*** New function: get-print-state OUTPUT-PORT
+
+Return the print state associated with this port if it exists,
+otherwise return #f.
+
+*** New function: directory-stream? OBJECT
+
+Returns true iff OBJECT is a directory stream --- the sort of object
+returned by `opendir'.
+
+** New function: using-readline?
+
+Return #t if readline is in use in the current repl.
+
+** structs will be removed in 1.4
+
+Structs will be replaced in Guile 1.4. We will merge GOOPS into Guile
+and use GOOPS objects as the fundamental record type.
+
+* Changes to the scm_ interface
+
+** structs will be removed in 1.4
+
+The entire current struct interface (struct.c, struct.h) will be
+replaced in Guile 1.4. We will merge GOOPS into libguile and use
+GOOPS objects as the fundamental record type.
+
+** The internal representation of subr's has changed
+
+Instead of giving a hint to the subr name, the CAR field of the subr
+now contains an index to a subr entry in scm_subr_table.
+
+*** New variable: scm_subr_table
+
+An array of subr entries. A subr entry contains the name, properties
+and documentation associated with the subr. The properties and
+documentation slots are not yet used.
+
+** A new scheme for "forwarding" calls to a builtin to a generic function
+
+It is now possible to extend the functionality of some Guile
+primitives by letting them defer a call to a GOOPS generic function on
+argument mismatch. This means that there is no loss of efficiency in
+normal evaluation.
+
+Example:
+
+ (use-modules (oop goops)) ; Must be GOOPS version 0.2.
+ (define-method + ((x <string>) (y <string>))
+ (string-append x y))
+
++ will still be as efficient as usual in numerical calculations, but
+can also be used for concatenating strings.
+
+Who will be the first one to extend Guile's numerical tower to
+rationals? :) [OK, there a few other things to fix before this can
+be made in a clean way.]
+
+*** New snarf macros for defining primitives: SCM_GPROC, SCM_GPROC1
+
+ New macro: SCM_GPROC (CNAME, SNAME, REQ, OPT, VAR, CFUNC, GENERIC)
+
+ New macro: SCM_GPROC1 (CNAME, SNAME, TYPE, CFUNC, GENERIC)
+
+These do the same job as SCM_PROC and SCM_PROC1, but they also define
+a variable GENERIC which can be used by the dispatch macros below.
+
+[This is experimental code which may change soon.]
+
+*** New macros for forwarding control to a generic on arg type error
+
+ New macro: SCM_WTA_DISPATCH_1 (GENERIC, ARG1, POS, SUBR)
+
+ New macro: SCM_WTA_DISPATCH_2 (GENERIC, ARG1, ARG2, POS, SUBR)
+
+These correspond to the scm_wta function call, and have the same
+behaviour until the user has called the GOOPS primitive
+`enable-primitive-generic!'. After that, these macros will apply the
+generic function GENERIC to the argument(s) instead of calling
+scm_wta.
+
+[This is experimental code which may change soon.]
+
+*** New macros for argument testing with generic dispatch
+
+ New macro: SCM_GASSERT1 (COND, GENERIC, ARG1, POS, SUBR)
+
+ New macro: SCM_GASSERT2 (COND, GENERIC, ARG1, ARG2, POS, SUBR)
+
+These correspond to the SCM_ASSERT macro, but will defer control to
+GENERIC on error after `enable-primitive-generic!' has been called.
+
+[This is experimental code which may change soon.]
+
+** New function: SCM scm_eval_body (SCM body, SCM env)
+
+Evaluates the body of a special form.
+
+** The internal representation of struct's has changed
+
+Previously, four slots were allocated for the procedure(s) of entities
+and operators. The motivation for this representation had to do with
+the structure of the evaluator, the wish to support tail-recursive
+generic functions, and efficiency. Since the generic function
+dispatch mechanism has changed, there is no longer a need for such an
+expensive representation, and the representation has been simplified.
+
+This should not make any difference for most users.
+
+** GOOPS support has been cleaned up.
+
+Some code has been moved from eval.c to objects.c and code in both of
+these compilation units has been cleaned up and better structured.
+
+*** New functions for applying generic functions
+
+ New function: SCM scm_apply_generic (GENERIC, ARGS)
+ New function: SCM scm_call_generic_0 (GENERIC)
+ New function: SCM scm_call_generic_1 (GENERIC, ARG1)
+ New function: SCM scm_call_generic_2 (GENERIC, ARG1, ARG2)
+ New function: SCM scm_call_generic_3 (GENERIC, ARG1, ARG2, ARG3)
+
+** Deprecated function: scm_make_named_hook
+
+It is now replaced by:
+
+** New function: SCM scm_create_hook (const char *name, int arity)
+
+Creates a hook in the same way as make-hook above but also
+binds a variable named NAME to it.
+
+This is the typical way of creating a hook from C code.
+
+Currently, the variable is created in the "current" module.
+This might change when we get the new module system.
+
+[The behaviour is identical to scm_make_named_hook.]
+
+
+\f
+Changes since Guile 1.3:
+
+* Changes to mailing lists
+
+** Some of the Guile mailing lists have moved to sourceware.cygnus.com.
+
+See the README file to find current addresses for all the Guile
+mailing lists.
* Changes to the distribution
-** libguile/append.h, libguile/append.c, libguile/extchrs.h,
-libguile/extchrs.c, libguile/mbstrings.h libguile/mbstrings.c,
-libguile/sequences.h, libguile/sequences.c removed.
+** Readline support is no longer included with Guile by default.
+
+Based on the different license terms of Guile and Readline, we
+concluded that Guile should not *by default* cause the linking of
+Readline into an application program. Readline support is now offered
+as a separate module, which is linked into an application only when
+you explicitly specify it.
+
+Although Guile is GNU software, its distribution terms add a special
+exception to the usual GNU General Public License (GPL). Guile's
+license includes a clause that allows you to link Guile with non-free
+programs. We add this exception so as not to put Guile at a
+disadvantage vis-a-vis other extensibility packages that support other
+languages.
+
+In contrast, the GNU Readline library is distributed under the GNU
+General Public License pure and simple. This means that you may not
+link Readline, even dynamically, into an application unless it is
+distributed under a free software license that is compatible the GPL.
+
+Because of this difference in distribution terms, an application that
+can use Guile may not be able to use Readline. Now users will be
+explicitly offered two independent decisions about the use of these
+two packages.
+
+You can activate the readline support by issuing
+
+ (use-modules (readline-activator))
+ (activate-readline)
+
+from your ".guile" file, for example.
* Changes to the stand-alone interpreter
-New procedures have been added to implement a "batch mode":
+** All builtins now print as primitives.
+Previously builtin procedures not belonging to the fundamental subr
+types printed as #<compiled closure #<primitive-procedure gsubr-apply>>.
+Now, they print as #<primitive-procedure NAME>.
+
+** Backtraces slightly more intelligible.
+gsubr-apply and macro transformer application frames no longer appear
+in backtraces.
+
+* Changes to Scheme functions and syntax
+
+** Guile now correctly handles internal defines by rewriting them into
+their equivalent letrec. Previously, internal defines would
+incrementally add to the innermost environment, without checking
+whether the restrictions specified in RnRS were met. This lead to the
+correct behaviour when these restriction actually were met, but didn't
+catch all illegal uses. Such an illegal use could lead to crashes of
+the Guile interpreter or or other unwanted results. An example of
+incorrect internal defines that made Guile behave erratically:
+
+ (let ()
+ (define a 1)
+ (define (b) a)
+ (define c (1+ (b)))
+ (define d 3)
+
+ (b))
+
+ => 2
+
+The problem with this example is that the definition of `c' uses the
+value of `b' directly. This confuses the meoization machine of Guile
+so that the second call of `b' (this time in a larger environment that
+also contains bindings for `c' and `d') refers to the binding of `c'
+instead of `a'. You could also make Guile crash with a variation on
+this theme:
+
+ (define (foo flag)
+ (define a 1)
+ (define (b flag) (if flag a 1))
+ (define c (1+ (b flag)))
+ (define d 3)
+
+ (b #t))
+
+ (foo #f)
+ (foo #t)
+
+From now on, Guile will issue an `Unbound variable: b' error message
+for both examples.
+
+** Hooks
+
+A hook contains a list of functions which should be called on
+particular occasions in an existing program. Hooks are used for
+customization.
+
+A window manager might have a hook before-window-map-hook. The window
+manager uses the function run-hooks to call all functions stored in
+before-window-map-hook each time a window is mapped. The user can
+store functions in the hook using add-hook!.
+
+In Guile, hooks are first class objects.
+
+*** New function: make-hook [N_ARGS]
+
+Return a hook for hook functions which can take N_ARGS arguments.
+The default value for N_ARGS is 0.
+
+(See also scm_make_named_hook below.)
+
+*** New function: add-hook! HOOK PROC [APPEND_P]
+
+Put PROC at the beginning of the list of functions stored in HOOK.
+If APPEND_P is supplied, and non-false, put PROC at the end instead.
+
+PROC must be able to take the number of arguments specified when the
+hook was created.
+
+If PROC already exists in HOOK, then remove it first.
+
+*** New function: remove-hook! HOOK PROC
+
+Remove PROC from the list of functions in HOOK.
+
+*** New function: reset-hook! HOOK
+
+Clear the list of hook functions stored in HOOK.
+
+*** New function: run-hook HOOK ARG1 ...
+
+Run all hook functions stored in HOOK with arguments ARG1 ... .
+The number of arguments supplied must correspond to the number given
+when the hook was created.
+
+** The function `dynamic-link' now takes optional keyword arguments.
+ The only keyword argument that is currently defined is `:global
+ BOOL'. With it, you can control whether the shared library will be
+ linked in global mode or not. In global mode, the symbols from the
+ linked library can be used to resolve references from other
+ dynamically linked libraries. In non-global mode, the linked
+ library is essentially invisible and can only be accessed via
+ `dynamic-func', etc. The default is now to link in global mode.
+ Previously, the default has been non-global mode.
+
+ The `#:global' keyword is only effective on platforms that support
+ the dlopen family of functions.
+
+** New function `provided?'
+
+ - Function: provided? FEATURE
+ Return true iff FEATURE is supported by this installation of
+ Guile. FEATURE must be a symbol naming a feature; the global
+ variable `*features*' is a list of available features.
+
+** Changes to the module (ice-9 expect):
+
+*** The expect-strings macro now matches `$' in a regular expression
+ only at a line-break or end-of-file by default. Previously it would
+ match the end of the string accumulated so far. The old behaviour
+ can be obtained by setting the variable `expect-strings-exec-flags'
+ to 0.
+
+*** The expect-strings macro now uses a variable `expect-strings-exec-flags'
+ for the regexp-exec flags. If `regexp/noteol' is included, then `$'
+ in a regular expression will still match before a line-break or
+ end-of-file. The default is `regexp/noteol'.
+
+*** The expect-strings macro now uses a variable
+ `expect-strings-compile-flags' for the flags to be supplied to
+ `make-regexp'. The default is `regexp/newline', which was previously
+ hard-coded.
+
+*** The expect macro now supplies two arguments to a match procedure:
+ the current accumulated string and a flag to indicate whether
+ end-of-file has been reached. Previously only the string was supplied.
+ If end-of-file is reached, the match procedure will be called an
+ additional time with the same accumulated string as the previous call
+ but with the flag set.
+
+** New module (ice-9 format), implementing the Common Lisp `format' function.
+
+This code, and the documentation for it that appears here, was
+borrowed from SLIB, with minor adaptations for Guile.
+
+ - Function: format DESTINATION FORMAT-STRING . ARGUMENTS
+ An almost complete implementation of Common LISP format description
+ according to the CL reference book `Common LISP' from Guy L.
+ Steele, Digital Press. Backward compatible to most of the
+ available Scheme format implementations.
+
+ Returns `#t', `#f' or a string; has side effect of printing
+ according to FORMAT-STRING. If DESTINATION is `#t', the output is
+ to the current output port and `#t' is returned. If DESTINATION
+ is `#f', a formatted string is returned as the result of the call.
+ NEW: If DESTINATION is a string, DESTINATION is regarded as the
+ format string; FORMAT-STRING is then the first argument and the
+ output is returned as a string. If DESTINATION is a number, the
+ output is to the current error port if available by the
+ implementation. Otherwise DESTINATION must be an output port and
+ `#t' is returned.
+
+ FORMAT-STRING must be a string. In case of a formatting error
+ format returns `#f' and prints a message on the current output or
+ error port. Characters are output as if the string were output by
+ the `display' function with the exception of those prefixed by a
+ tilde (~). For a detailed description of the FORMAT-STRING syntax
+ please consult a Common LISP format reference manual. For a test
+ suite to verify this format implementation load `formatst.scm'.
+ Please send bug reports to `lutzeb@cs.tu-berlin.de'.
+
+ Note: `format' is not reentrant, i.e. only one `format'-call may
+ be executed at a time.
+
+
+*** Format Specification (Format version 3.0)
+
+ Please consult a Common LISP format reference manual for a detailed
+description of the format string syntax. For a demonstration of the
+implemented directives see `formatst.scm'.
+
+ This implementation supports directive parameters and modifiers (`:'
+and `@' characters). Multiple parameters must be separated by a comma
+(`,'). Parameters can be numerical parameters (positive or negative),
+character parameters (prefixed by a quote character (`''), variable
+parameters (`v'), number of rest arguments parameter (`#'), empty and
+default parameters. Directive characters are case independent. The
+general form of a directive is:
+
+DIRECTIVE ::= ~{DIRECTIVE-PARAMETER,}[:][@]DIRECTIVE-CHARACTER
+
+DIRECTIVE-PARAMETER ::= [ [-|+]{0-9}+ | 'CHARACTER | v | # ]
+
+*** Implemented CL Format Control Directives
+
+ Documentation syntax: Uppercase characters represent the
+corresponding control directive characters. Lowercase characters
+represent control directive parameter descriptions.
+
+`~A'
+ Any (print as `display' does).
+ `~@A'
+ left pad.
+
+ `~MINCOL,COLINC,MINPAD,PADCHARA'
+ full padding.
+
+`~S'
+ S-expression (print as `write' does).
+ `~@S'
+ left pad.
+
+ `~MINCOL,COLINC,MINPAD,PADCHARS'
+ full padding.
+
+`~D'
+ Decimal.
+ `~@D'
+ print number sign always.
+
+ `~:D'
+ print comma separated.
+
+ `~MINCOL,PADCHAR,COMMACHARD'
+ padding.
+
+`~X'
+ Hexadecimal.
+ `~@X'
+ print number sign always.
+
+ `~:X'
+ print comma separated.
+
+ `~MINCOL,PADCHAR,COMMACHARX'
+ padding.
+
+`~O'
+ Octal.
+ `~@O'
+ print number sign always.
+
+ `~:O'
+ print comma separated.
+
+ `~MINCOL,PADCHAR,COMMACHARO'
+ padding.
+
+`~B'
+ Binary.
+ `~@B'
+ print number sign always.
+
+ `~:B'
+ print comma separated.
+
+ `~MINCOL,PADCHAR,COMMACHARB'
+ padding.
+
+`~NR'
+ Radix N.
+ `~N,MINCOL,PADCHAR,COMMACHARR'
+ padding.
+
+`~@R'
+ print a number as a Roman numeral.
+
+`~:@R'
+ print a number as an "old fashioned" Roman numeral.
+
+`~:R'
+ print a number as an ordinal English number.
+
+`~:@R'
+ print a number as a cardinal English number.
+
+`~P'
+ Plural.
+ `~@P'
+ prints `y' and `ies'.
+
+ `~:P'
+ as `~P but jumps 1 argument backward.'
+
+ `~:@P'
+ as `~@P but jumps 1 argument backward.'
+
+`~C'
+ Character.
+ `~@C'
+ prints a character as the reader can understand it (i.e. `#\'
+ prefixing).
+
+ `~:C'
+ prints a character as emacs does (eg. `^C' for ASCII 03).
+
+`~F'
+ Fixed-format floating-point (prints a flonum like MMM.NNN).
+ `~WIDTH,DIGITS,SCALE,OVERFLOWCHAR,PADCHARF'
+ `~@F'
+ If the number is positive a plus sign is printed.
+
+`~E'
+ Exponential floating-point (prints a flonum like MMM.NNN`E'EE).
+ `~WIDTH,DIGITS,EXPONENTDIGITS,SCALE,OVERFLOWCHAR,PADCHAR,EXPONENTCHARE'
+ `~@E'
+ If the number is positive a plus sign is printed.
+
+`~G'
+ General floating-point (prints a flonum either fixed or
+ exponential).
+ `~WIDTH,DIGITS,EXPONENTDIGITS,SCALE,OVERFLOWCHAR,PADCHAR,EXPONENTCHARG'
+ `~@G'
+ If the number is positive a plus sign is printed.
+
+`~$'
+ Dollars floating-point (prints a flonum in fixed with signs
+ separated).
+ `~DIGITS,SCALE,WIDTH,PADCHAR$'
+ `~@$'
+ If the number is positive a plus sign is printed.
+
+ `~:@$'
+ A sign is always printed and appears before the padding.
+
+ `~:$'
+ The sign appears before the padding.
+
+`~%'
+ Newline.
+ `~N%'
+ print N newlines.
+
+`~&'
+ print newline if not at the beginning of the output line.
+ `~N&'
+ prints `~&' and then N-1 newlines.
+
+`~|'
+ Page Separator.
+ `~N|'
+ print N page separators.
+
+`~~'
+ Tilde.
+ `~N~'
+ print N tildes.
+
+`~'<newline>
+ Continuation Line.
+ `~:'<newline>
+ newline is ignored, white space left.
+
+ `~@'<newline>
+ newline is left, white space ignored.
+
+`~T'
+ Tabulation.
+ `~@T'
+ relative tabulation.
+
+ `~COLNUM,COLINCT'
+ full tabulation.
+
+`~?'
+ Indirection (expects indirect arguments as a list).
+ `~@?'
+ extracts indirect arguments from format arguments.
+
+`~(STR~)'
+ Case conversion (converts by `string-downcase').
+ `~:(STR~)'
+ converts by `string-capitalize'.
+
+ `~@(STR~)'
+ converts by `string-capitalize-first'.
+
+ `~:@(STR~)'
+ converts by `string-upcase'.
+
+`~*'
+ Argument Jumping (jumps 1 argument forward).
+ `~N*'
+ jumps N arguments forward.
+
+ `~:*'
+ jumps 1 argument backward.
+
+ `~N:*'
+ jumps N arguments backward.
+
+ `~@*'
+ jumps to the 0th argument.
+
+ `~N@*'
+ jumps to the Nth argument (beginning from 0)
+
+`~[STR0~;STR1~;...~;STRN~]'
+ Conditional Expression (numerical clause conditional).
+ `~N['
+ take argument from N.
+
+ `~@['
+ true test conditional.
+
+ `~:['
+ if-else-then conditional.
+
+ `~;'
+ clause separator.
+
+ `~:;'
+ default clause follows.
+
+`~{STR~}'
+ Iteration (args come from the next argument (a list)).
+ `~N{'
+ at most N iterations.
+
+ `~:{'
+ args from next arg (a list of lists).
+
+ `~@{'
+ args from the rest of arguments.
+
+ `~:@{'
+ args from the rest args (lists).
+
+`~^'
+ Up and out.
+ `~N^'
+ aborts if N = 0
+
+ `~N,M^'
+ aborts if N = M
+
+ `~N,M,K^'
+ aborts if N <= M <= K
+
+*** Not Implemented CL Format Control Directives
-Function: batch-mode?
+`~:A'
+ print `#f' as an empty list (see below).
+
+`~:S'
+ print `#f' as an empty list (see below).
+
+`~<~>'
+ Justification.
+
+`~:^'
+ (sorry I don't understand its semantics completely)
+
+*** Extended, Replaced and Additional Control Directives
+
+`~MINCOL,PADCHAR,COMMACHAR,COMMAWIDTHD'
+`~MINCOL,PADCHAR,COMMACHAR,COMMAWIDTHX'
+`~MINCOL,PADCHAR,COMMACHAR,COMMAWIDTHO'
+`~MINCOL,PADCHAR,COMMACHAR,COMMAWIDTHB'
+`~N,MINCOL,PADCHAR,COMMACHAR,COMMAWIDTHR'
+ COMMAWIDTH is the number of characters between two comma
+ characters.
+
+`~I'
+ print a R4RS complex number as `~F~@Fi' with passed parameters for
+ `~F'.
+
+`~Y'
+ Pretty print formatting of an argument for scheme code lists.
+
+`~K'
+ Same as `~?.'
+
+`~!'
+ Flushes the output if format DESTINATION is a port.
+
+`~_'
+ Print a `#\space' character
+ `~N_'
+ print N `#\space' characters.
+
+`~/'
+ Print a `#\tab' character
+ `~N/'
+ print N `#\tab' characters.
+
+`~NC'
+ Takes N as an integer representation for a character. No arguments
+ are consumed. N is converted to a character by `integer->char'. N
+ must be a positive decimal number.
+
+`~:S'
+ Print out readproof. Prints out internal objects represented as
+ `#<...>' as strings `"#<...>"' so that the format output can always
+ be processed by `read'.
+
+`~:A'
+ Print out readproof. Prints out internal objects represented as
+ `#<...>' as strings `"#<...>"' so that the format output can always
+ be processed by `read'.
+
+`~Q'
+ Prints information and a copyright notice on the format
+ implementation.
+ `~:Q'
+ prints format version.
+
+`~F, ~E, ~G, ~$'
+ may also print number strings, i.e. passing a number as a string
+ and format it accordingly.
+
+*** Configuration Variables
+
+ The format module exports some configuration variables to suit the
+systems and users needs. There should be no modification necessary for
+the configuration that comes with Guile. Format detects automatically
+if the running scheme system implements floating point numbers and
+complex numbers.
+
+format:symbol-case-conv
+ Symbols are converted by `symbol->string' so the case type of the
+ printed symbols is implementation dependent.
+ `format:symbol-case-conv' is a one arg closure which is either
+ `#f' (no conversion), `string-upcase', `string-downcase' or
+ `string-capitalize'. (default `#f')
+
+format:iobj-case-conv
+ As FORMAT:SYMBOL-CASE-CONV but applies for the representation of
+ implementation internal objects. (default `#f')
+
+format:expch
+ The character prefixing the exponent value in `~E' printing.
+ (default `#\E')
+
+*** Compatibility With Other Format Implementations
+
+SLIB format 2.x:
+ See `format.doc'.
+
+SLIB format 1.4:
+ Downward compatible except for padding support and `~A', `~S',
+ `~P', `~X' uppercase printing. SLIB format 1.4 uses C-style
+ `printf' padding support which is completely replaced by the CL
+ `format' padding style.
+
+MIT C-Scheme 7.1:
+ Downward compatible except for `~', which is not documented
+ (ignores all characters inside the format string up to a newline
+ character). (7.1 implements `~a', `~s', ~NEWLINE, `~~', `~%',
+ numerical and variable parameters and `:/@' modifiers in the CL
+ sense).
+
+Elk 1.5/2.0:
+ Downward compatible except for `~A' and `~S' which print in
+ uppercase. (Elk implements `~a', `~s', `~~', and `~%' (no
+ directive parameters or modifiers)).
+
+Scheme->C 01nov91:
+ Downward compatible except for an optional destination parameter:
+ S2C accepts a format call without a destination which returns a
+ formatted string. This is equivalent to a #f destination in S2C.
+ (S2C implements `~a', `~s', `~c', `~%', and `~~' (no directive
+ parameters or modifiers)).
+
+
+** Changes to string-handling functions.
+
+These functions were added to support the (ice-9 format) module, above.
+
+*** New function: string-upcase STRING
+*** New function: string-downcase STRING
+
+These are non-destructive versions of the existing string-upcase! and
+string-downcase! functions.
+
+*** New function: string-capitalize! STRING
+*** New function: string-capitalize STRING
+
+These functions convert the first letter of each word in the string to
+upper case. Thus:
+
+ (string-capitalize "howdy there")
+ => "Howdy There"
+
+As with the other functions, string-capitalize! modifies the string in
+place, while string-capitalize returns a modified copy of its argument.
+
+*** New function: string-ci->symbol STRING
+
+Return a symbol whose name is STRING, but having the same case as if
+the symbol had be read by `read'.
+
+Guile can be configured to be sensitive or insensitive to case
+differences in Scheme identifiers. If Guile is case-insensitive, all
+symbols are converted to lower case on input. The `string-ci->symbol'
+function returns a symbol whose name in STRING, transformed as Guile
+would if STRING were input.
+
+*** New function: substring-move! STRING1 START END STRING2 START
+
+Copy the substring of STRING1 from START (inclusive) to END
+(exclusive) to STRING2 at START. STRING1 and STRING2 may be the same
+string, and the source and destination areas may overlap; in all
+cases, the function behaves as if all the characters were copied
+simultanously.
+
+*** Extended functions: substring-move-left! substring-move-right!
+
+These functions now correctly copy arbitrarily overlapping substrings;
+they are both synonyms for substring-move!.
+
+
+** New module (ice-9 getopt-long), with the function `getopt-long'.
+
+getopt-long is a function for parsing command-line arguments in a
+manner consistent with other GNU programs.
+
+(getopt-long ARGS GRAMMAR)
+Parse the arguments ARGS according to the argument list grammar GRAMMAR.
+
+ARGS should be a list of strings. Its first element should be the
+name of the program; subsequent elements should be the arguments
+that were passed to the program on the command line. The
+`program-arguments' procedure returns a list of this form.
+
+GRAMMAR is a list of the form:
+((OPTION (PROPERTY VALUE) ...) ...)
+
+Each OPTION should be a symbol. `getopt-long' will accept a
+command-line option named `--OPTION'.
+Each option can have the following (PROPERTY VALUE) pairs:
+
+ (single-char CHAR) --- Accept `-CHAR' as a single-character
+ equivalent to `--OPTION'. This is how to specify traditional
+ Unix-style flags.
+ (required? BOOL) --- If BOOL is true, the option is required.
+ getopt-long will raise an error if it is not found in ARGS.
+ (value BOOL) --- If BOOL is #t, the option accepts a value; if
+ it is #f, it does not; and if it is the symbol
+ `optional', the option may appear in ARGS with or
+ without a value.
+ (predicate FUNC) --- If the option accepts a value (i.e. you
+ specified `(value #t)' for this option), then getopt
+ will apply FUNC to the value, and throw an exception
+ if it returns #f. FUNC should be a procedure which
+ accepts a string and returns a boolean value; you may
+ need to use quasiquotes to get it into GRAMMAR.
+
+The (PROPERTY VALUE) pairs may occur in any order, but each
+property may occur only once. By default, options do not have
+single-character equivalents, are not required, and do not take
+values.
+
+In ARGS, single-character options may be combined, in the usual
+Unix fashion: ("-x" "-y") is equivalent to ("-xy"). If an option
+accepts values, then it must be the last option in the
+combination; the value is the next argument. So, for example, using
+the following grammar:
+ ((apples (single-char #\a))
+ (blimps (single-char #\b) (value #t))
+ (catalexis (single-char #\c) (value #t)))
+the following argument lists would be acceptable:
+ ("-a" "-b" "bang" "-c" "couth") ("bang" and "couth" are the values
+ for "blimps" and "catalexis")
+ ("-ab" "bang" "-c" "couth") (same)
+ ("-ac" "couth" "-b" "bang") (same)
+ ("-abc" "couth" "bang") (an error, since `-b' is not the
+ last option in its combination)
+
+If an option's value is optional, then `getopt-long' decides
+whether it has a value by looking at what follows it in ARGS. If
+the next element is a string, and it does not appear to be an
+option itself, then that string is the option's value.
+
+The value of a long option can appear as the next element in ARGS,
+or it can follow the option name, separated by an `=' character.
+Thus, using the same grammar as above, the following argument lists
+are equivalent:
+ ("--apples" "Braeburn" "--blimps" "Goodyear")
+ ("--apples=Braeburn" "--blimps" "Goodyear")
+ ("--blimps" "Goodyear" "--apples=Braeburn")
+
+If the option "--" appears in ARGS, argument parsing stops there;
+subsequent arguments are returned as ordinary arguments, even if
+they resemble options. So, in the argument list:
+ ("--apples" "Granny Smith" "--" "--blimp" "Goodyear")
+`getopt-long' will recognize the `apples' option as having the
+value "Granny Smith", but it will not recognize the `blimp'
+option; it will return the strings "--blimp" and "Goodyear" as
+ordinary argument strings.
+
+The `getopt-long' function returns the parsed argument list as an
+assocation list, mapping option names --- the symbols from GRAMMAR
+--- onto their values, or #t if the option does not accept a value.
+Unused options do not appear in the alist.
+
+All arguments that are not the value of any option are returned
+as a list, associated with the empty list.
+
+`getopt-long' throws an exception if:
+- it finds an unrecognized option in ARGS
+- a required option is omitted
+- an option that requires an argument doesn't get one
+- an option that doesn't accept an argument does get one (this can
+ only happen using the long option `--opt=value' syntax)
+- an option predicate fails
+
+So, for example:
+
+(define grammar
+ `((lockfile-dir (required? #t)
+ (value #t)
+ (single-char #\k)
+ (predicate ,file-is-directory?))
+ (verbose (required? #f)
+ (single-char #\v)
+ (value #f))
+ (x-includes (single-char #\x))
+ (rnet-server (single-char #\y)
+ (predicate ,string?))))
+
+(getopt-long '("my-prog" "-vk" "/tmp" "foo1" "--x-includes=/usr/include"
+ "--rnet-server=lamprod" "--" "-fred" "foo2" "foo3")
+ grammar)
+=> ((() "foo1" "-fred" "foo2" "foo3")
+ (rnet-server . "lamprod")
+ (x-includes . "/usr/include")
+ (lockfile-dir . "/tmp")
+ (verbose . #t))
+
+** The (ice-9 getopt-gnu-style) module is obsolete; use (ice-9 getopt-long).
+
+It will be removed in a few releases.
+
+** New syntax: lambda*
+** New syntax: define*
+** New syntax: define*-public
+** New syntax: defmacro*
+** New syntax: defmacro*-public
+Guile now supports optional arguments.
+
+`lambda*', `define*', `define*-public', `defmacro*' and
+`defmacro*-public' are identical to the non-* versions except that
+they use an extended type of parameter list that has the following BNF
+syntax (parentheses are literal, square brackets indicate grouping,
+and `*', `+' and `?' have the usual meaning):
+
+ ext-param-list ::= ( [identifier]* [#&optional [ext-var-decl]+]?
+ [#&key [ext-var-decl]+ [#&allow-other-keys]?]?
+ [[#&rest identifier]|[. identifier]]? ) | [identifier]
+
+ ext-var-decl ::= identifier | ( identifier expression )
+
+The semantics are best illustrated with the following documentation
+and examples for `lambda*':
+
+ lambda* args . body
+ lambda extended for optional and keyword arguments
+
+ lambda* creates a procedure that takes optional arguments. These
+ are specified by putting them inside brackets at the end of the
+ paramater list, but before any dotted rest argument. For example,
+ (lambda* (a b #&optional c d . e) '())
+ creates a procedure with fixed arguments a and b, optional arguments c
+ and d, and rest argument e. If the optional arguments are omitted
+ in a call, the variables for them are unbound in the procedure. This
+ can be checked with the bound? macro.
+
+ lambda* can also take keyword arguments. For example, a procedure
+ defined like this:
+ (lambda* (#&key xyzzy larch) '())
+ can be called with any of the argument lists (#:xyzzy 11)
+ (#:larch 13) (#:larch 42 #:xyzzy 19) (). Whichever arguments
+ are given as keywords are bound to values.
+
+ Optional and keyword arguments can also be given default values
+ which they take on when they are not present in a call, by giving a
+ two-item list in place of an optional argument, for example in:
+ (lambda* (foo #&optional (bar 42) #&key (baz 73)) (list foo bar baz))
+ foo is a fixed argument, bar is an optional argument with default
+ value 42, and baz is a keyword argument with default value 73.
+ Default value expressions are not evaluated unless they are needed
+ and until the procedure is called.
+
+ lambda* now supports two more special parameter list keywords.
+
+ lambda*-defined procedures now throw an error by default if a
+ keyword other than one of those specified is found in the actual
+ passed arguments. However, specifying #&allow-other-keys
+ immediately after the kyword argument declarations restores the
+ previous behavior of ignoring unknown keywords. lambda* also now
+ guarantees that if the same keyword is passed more than once, the
+ last one passed is the one that takes effect. For example,
+ ((lambda* (#&key (heads 0) (tails 0)) (display (list heads tails)))
+ #:heads 37 #:tails 42 #:heads 99)
+ would result in (99 47) being displayed.
+
+ #&rest is also now provided as a synonym for the dotted syntax rest
+ argument. The argument lists (a . b) and (a #&rest b) are equivalent in
+ all respects to lambda*. This is provided for more similarity to DSSSL,
+ MIT-Scheme and Kawa among others, as well as for refugees from other
+ Lisp dialects.
+
+Further documentation may be found in the optargs.scm file itself.
+
+The optional argument module also exports the macros `let-optional',
+`let-optional*', `let-keywords', `let-keywords*' and `bound?'. These
+are not documented here because they may be removed in the future, but
+full documentation is still available in optargs.scm.
+
+** New syntax: and-let*
+Guile now supports the `and-let*' form, described in the draft SRFI-2.
+
+Syntax: (land* (<clause> ...) <body> ...)
+Each <clause> should have one of the following forms:
+ (<variable> <expression>)
+ (<expression>)
+ <bound-variable>
+Each <variable> or <bound-variable> should be an identifier. Each
+<expression> should be a valid expression. The <body> should be a
+possibly empty sequence of expressions, like the <body> of a
+lambda form.
+
+Semantics: A LAND* expression is evaluated by evaluating the
+<expression> or <bound-variable> of each of the <clause>s from
+left to right. The value of the first <expression> or
+<bound-variable> that evaluates to a false value is returned; the
+remaining <expression>s and <bound-variable>s are not evaluated.
+The <body> forms are evaluated iff all the <expression>s and
+<bound-variable>s evaluate to true values.
+
+The <expression>s and the <body> are evaluated in an environment
+binding each <variable> of the preceding (<variable> <expression>)
+clauses to the value of the <expression>. Later bindings
+shadow earlier bindings.
+
+Guile's and-let* macro was contributed by Michael Livshin.
+
+** New sorting functions
+
+*** New function: sorted? SEQUENCE LESS?
+Returns `#t' when the sequence argument is in non-decreasing order
+according to LESS? (that is, there is no adjacent pair `... x y
+...' for which `(less? y x)').
+
+Returns `#f' when the sequence contains at least one out-of-order
+pair. It is an error if the sequence is neither a list nor a
+vector.
+
+*** New function: merge LIST1 LIST2 LESS?
+LIST1 and LIST2 are sorted lists.
+Returns the sorted list of all elements in LIST1 and LIST2.
+
+Assume that the elements a and b1 in LIST1 and b2 in LIST2 are "equal"
+in the sense that (LESS? x y) --> #f for x, y in {a, b1, b2},
+and that a < b1 in LIST1. Then a < b1 < b2 in the result.
+(Here "<" should read "comes before".)
+
+*** New procedure: merge! LIST1 LIST2 LESS?
+Merges two lists, re-using the pairs of LIST1 and LIST2 to build
+the result. If the code is compiled, and LESS? constructs no new
+pairs, no pairs at all will be allocated. The first pair of the
+result will be either the first pair of LIST1 or the first pair of
+LIST2.
+
+*** New function: sort SEQUENCE LESS?
+Accepts either a list or a vector, and returns a new sequence
+which is sorted. The new sequence is the same type as the input.
+Always `(sorted? (sort sequence less?) less?)'. The original
+sequence is not altered in any way. The new sequence shares its
+elements with the old one; no elements are copied.
+
+*** New procedure: sort! SEQUENCE LESS
+Returns its sorted result in the original boxes. No new storage is
+allocated at all. Proper usage: (set! slist (sort! slist <))
+
+*** New function: stable-sort SEQUENCE LESS?
+Similar to `sort' but stable. That is, if "equal" elements are
+ordered a < b in the original sequence, they will have the same order
+in the result.
+
+*** New function: stable-sort! SEQUENCE LESS?
+Similar to `sort!' but stable.
+Uses temporary storage when sorting vectors.
+
+*** New functions: sort-list, sort-list!
+Added for compatibility with scsh.
+
+** New built-in random number support
+
+*** New function: random N [STATE]
+Accepts a positive integer or real N and returns a number of the
+same type between zero (inclusive) and N (exclusive). The values
+returned have a uniform distribution.
+
+The optional argument STATE must be of the type produced by
+`copy-random-state' or `seed->random-state'. It defaults to the value
+of the variable `*random-state*'. This object is used to maintain the
+state of the pseudo-random-number generator and is altered as a side
+effect of the `random' operation.
+
+*** New variable: *random-state*
+Holds a data structure that encodes the internal state of the
+random-number generator that `random' uses by default. The nature
+of this data structure is implementation-dependent. It may be
+printed out and successfully read back in, but may or may not
+function correctly as a random-number state object in another
+implementation.
+
+*** New function: copy-random-state [STATE]
+Returns a new object of type suitable for use as the value of the
+variable `*random-state*' and as a second argument to `random'.
+If argument STATE is given, a copy of it is returned. Otherwise a
+copy of `*random-state*' is returned.
+
+*** New function: seed->random-state SEED
+Returns a new object of type suitable for use as the value of the
+variable `*random-state*' and as a second argument to `random'.
+SEED is a string or a number. A new state is generated and
+initialized using SEED.
+
+*** New function: random:uniform [STATE]
+Returns an uniformly distributed inexact real random number in the
+range between 0 and 1.
+
+*** New procedure: random:solid-sphere! VECT [STATE]
+Fills VECT with inexact real random numbers the sum of whose
+squares is less than 1.0. Thinking of VECT as coordinates in
+space of dimension N = `(vector-length VECT)', the coordinates are
+uniformly distributed within the unit N-shere. The sum of the
+squares of the numbers is returned. VECT can be either a vector
+or a uniform vector of doubles.
+
+*** New procedure: random:hollow-sphere! VECT [STATE]
+Fills VECT with inexact real random numbers the sum of whose squares
+is equal to 1.0. Thinking of VECT as coordinates in space of
+dimension n = `(vector-length VECT)', the coordinates are uniformly
+distributed over the surface of the unit n-shere. VECT can be either
+a vector or a uniform vector of doubles.
+
+*** New function: random:normal [STATE]
+Returns an inexact real in a normal distribution with mean 0 and
+standard deviation 1. For a normal distribution with mean M and
+standard deviation D use `(+ M (* D (random:normal)))'.
+
+*** New procedure: random:normal-vector! VECT [STATE]
+Fills VECT with inexact real random numbers which are independent and
+standard normally distributed (i.e., with mean 0 and variance 1).
+VECT can be either a vector or a uniform vector of doubles.
+
+*** New function: random:exp STATE
+Returns an inexact real in an exponential distribution with mean 1.
+For an exponential distribution with mean U use (* U (random:exp)).
+
+** The range of logand, logior, logxor, logtest, and logbit? have changed.
+
+These functions now operate on numbers in the range of a C unsigned
+long.
+
+These functions used to operate on numbers in the range of a C signed
+long; however, this seems inappropriate, because Guile integers don't
+overflow.
+
+** New function: make-guardian
+This is an implementation of guardians as described in
+R. Kent Dybvig, Carl Bruggeman, and David Eby (1993) "Guardians in a
+Generation-Based Garbage Collector" ACM SIGPLAN Conference on
+Programming Language Design and Implementation, June 1993
+ftp://ftp.cs.indiana.edu/pub/scheme-repository/doc/pubs/guardians.ps.gz
+
+** New functions: delq1!, delv1!, delete1!
+These procedures behave similar to delq! and friends but delete only
+one object if at all.
+
+** New function: unread-string STRING PORT
+Unread STRING to PORT, that is, push it back onto the port so that
+next read operation will work on the pushed back characters.
+
+** unread-char can now be called multiple times
+If unread-char is called multiple times, the unread characters will be
+read again in last-in first-out order.
+
+** the procedures uniform-array-read! and uniform-array-write! now
+work on any kind of port, not just ports which are open on a file.
+
+** Now 'l' in a port mode requests line buffering.
+
+** The procedure truncate-file now works on string ports as well
+as file ports. If the size argument is omitted, the current
+file position is used.
+
+** new procedure: seek PORT/FDES OFFSET WHENCE
+The arguments are the same as for the old fseek procedure, but it
+works on string ports as well as random-access file ports.
+
+** the fseek procedure now works on string ports, since it has been
+redefined using seek.
+
+** the setvbuf procedure now uses a default size if mode is _IOFBF and
+size is not supplied.
+
+** the newline procedure no longer flushes the port if it's not
+line-buffered: previously it did if it was the current output port.
+
+** open-pipe and close-pipe are no longer primitive procedures, but
+an emulation can be obtained using `(use-modules (ice-9 popen))'.
+
+** the freopen procedure has been removed.
+
+** new procedure: drain-input PORT
+Drains PORT's read buffers (including any pushed-back characters)
+and returns the contents as a single string.
+
+** New function: map-in-order PROC LIST1 LIST2 ...
+Version of `map' which guarantees that the procedure is applied to the
+lists in serial order.
+
+** Renamed `serial-array-copy!' and `serial-array-map!' to
+`array-copy-in-order!' and `array-map-in-order!'. The old names are
+now obsolete and will go away in release 1.5.
+
+** New syntax: collect BODY1 ...
+Version of `begin' which returns a list of the results of the body
+forms instead of the result of the last body form. In contrast to
+`begin', `collect' allows an empty body.
+
+** New functions: read-history FILENAME, write-history FILENAME
+Read/write command line history from/to file. Returns #t on success
+and #f if an error occured.
+
+** `ls' and `lls' in module (ice-9 ls) now handle no arguments.
+
+These procedures return a list of definitions available in the specified
+argument, a relative module reference. In the case of no argument,
+`(current-module)' is now consulted for definitions to return, instead
+of simply returning #f, the former behavior.
+
+** The #/ syntax for lists is no longer supported.
+
+Earlier versions of Scheme accepted this syntax, but printed a
+warning.
+
+** Guile no longer consults the SCHEME_LOAD_PATH environment variable.
+
+Instead, you should set GUILE_LOAD_PATH to tell Guile where to find
+modules.
+
+* Changes to the gh_ interface
+
+** gh_scm2doubles
+
+Now takes a second argument which is the result array. If this
+pointer is NULL, a new array is malloced (the old behaviour).
+
+** gh_chars2byvect, gh_shorts2svect, gh_floats2fvect, gh_scm2chars,
+ gh_scm2shorts, gh_scm2longs, gh_scm2floats
+
+New functions.
+
+* Changes to the scm_ interface
+
+** Function: scm_make_named_hook (char* name, int n_args)
+
+Creates a hook in the same way as make-hook above but also
+binds a variable named NAME to it.
+
+This is the typical way of creating a hook from C code.
+
+Currently, the variable is created in the "current" module. This
+might change when we get the new module system.
+
+** The smob interface
+
+The interface for creating smobs has changed. For documentation, see
+data-rep.info (made from guile-core/doc/data-rep.texi).
+
+*** Deprecated function: SCM scm_newsmob (scm_smobfuns *)
+
+>>> This function will be removed in 1.3.4. <<<
+
+It is replaced by:
+
+*** Function: SCM scm_make_smob_type (const char *name, scm_sizet size)
+This function adds a new smob type, named NAME, with instance size
+SIZE to the system. The return value is a tag that is used in
+creating instances of the type. If SIZE is 0, then no memory will
+be allocated when instances of the smob are created, and nothing
+will be freed by the default free function.
+
+*** Function: void scm_set_smob_mark (long tc, SCM (*mark) (SCM))
+This function sets the smob marking procedure for the smob type
+specified by the tag TC. TC is the tag returned by
+`scm_make_smob_type'.
+
+*** Function: void scm_set_smob_free (long tc, SCM (*mark) (SCM))
+This function sets the smob freeing procedure for the smob type
+specified by the tag TC. TC is the tag returned by
+`scm_make_smob_type'.
+
+*** Function: void scm_set_smob_print (tc, print)
+
+ - Function: void scm_set_smob_print (long tc,
+ scm_sizet (*print) (SCM,
+ SCM,
+ scm_print_state *))
+
+This function sets the smob printing procedure for the smob type
+specified by the tag TC. TC is the tag returned by
+`scm_make_smob_type'.
+
+*** Function: void scm_set_smob_equalp (long tc, SCM (*equalp) (SCM, SCM))
+This function sets the smob equality-testing predicate for the
+smob type specified by the tag TC. TC is the tag returned by
+`scm_make_smob_type'.
+
+*** Macro: void SCM_NEWSMOB (SCM var, long tc, void *data)
+Make VALUE contain a smob instance of the type with type code TC and
+smob data DATA. VALUE must be previously declared as C type `SCM'.
+
+*** Macro: fn_returns SCM_RETURN_NEWSMOB (long tc, void *data)
+This macro expands to a block of code that creates a smob instance
+of the type with type code TC and smob data DATA, and returns that
+`SCM' value. It should be the last piece of code in a block.
+
+** The interfaces for using I/O ports and implementing port types
+(ptobs) have changed significantly. The new interface is based on
+shared access to buffers and a new set of ptob procedures.
+
+*** scm_newptob has been removed
+
+It is replaced by:
+
+*** Function: SCM scm_make_port_type (type_name, fill_buffer, write_flush)
+
+- Function: SCM scm_make_port_type (char *type_name,
+ int (*fill_buffer) (SCM port),
+ void (*write_flush) (SCM port));
+
+Similarly to the new smob interface, there is a set of function
+setters by which the user can customize the behaviour of his port
+type. See ports.h (scm_set_port_XXX).
+
+** scm_strport_to_string: New function: creates a new string from
+a string port's buffer.
+
+** Plug in interface for random number generators
+The variable `scm_the_rng' in random.c contains a value and three
+function pointers which together define the current random number
+generator being used by the Scheme level interface and the random
+number library functions.
+
+The user is free to replace the default generator with the generator
+of his own choice.
+
+*** Variable: size_t scm_the_rng.rstate_size
+The size of the random state type used by the current RNG
+measured in chars.
+
+*** Function: unsigned long scm_the_rng.random_bits (scm_rstate *STATE)
+Given the random STATE, return 32 random bits.
+
+*** Function: void scm_the_rng.init_rstate (scm_rstate *STATE, chars *S, int N)
+Seed random state STATE using string S of length N.
+
+*** Function: scm_rstate *scm_the_rng.copy_rstate (scm_rstate *STATE)
+Given random state STATE, return a malloced copy.
+
+** Default RNG
+The default RNG is the MWC (Multiply With Carry) random number
+generator described by George Marsaglia at the Department of
+Statistics and Supercomputer Computations Research Institute, The
+Florida State University (http://stat.fsu.edu/~geo).
+
+It uses 64 bits, has a period of 4578426017172946943 (4.6e18), and
+passes all tests in the DIEHARD test suite
+(http://stat.fsu.edu/~geo/diehard.html). The generation of 32 bits
+costs one multiply and one add on platforms which either supports long
+longs (gcc does this on most systems) or have 64 bit longs. The cost
+is four multiply on other systems but this can be optimized by writing
+scm_i_uniform32 in assembler.
+
+These functions are provided through the scm_the_rng interface for use
+by libguile and the application.
+
+*** Function: unsigned long scm_i_uniform32 (scm_i_rstate *STATE)
+Given the random STATE, return 32 random bits.
+Don't use this function directly. Instead go through the plugin
+interface (see "Plug in interface" above).
+
+*** Function: void scm_i_init_rstate (scm_i_rstate *STATE, char *SEED, int N)
+Initialize STATE using SEED of length N.
+
+*** Function: scm_i_rstate *scm_i_copy_rstate (scm_i_rstate *STATE)
+Return a malloc:ed copy of STATE. This function can easily be re-used
+in the interfaces to other RNGs.
+
+** Random number library functions
+These functions use the current RNG through the scm_the_rng interface.
+It might be a good idea to use these functions from your C code so
+that only one random generator is used by all code in your program.
+
+The default random state is stored in:
+
+*** Variable: SCM scm_var_random_state
+Contains the vcell of the Scheme variable "*random-state*" which is
+used as default state by all random number functions in the Scheme
+level interface.
+
+Example:
+
+ double x = scm_c_uniform01 (SCM_RSTATE (SCM_CDR (scm_var_random_state)));
+
+*** Function: scm_rstate *scm_c_default_rstate (void)
+This is a convenience function which returns the value of
+scm_var_random_state. An error message is generated if this value
+isn't a random state.
+
+*** Function: scm_rstate *scm_c_make_rstate (char *SEED, int LENGTH)
+Make a new random state from the string SEED of length LENGTH.
+
+It is generally not a good idea to use multiple random states in a
+program. While subsequent random numbers generated from one random
+state are guaranteed to be reasonably independent, there is no such
+guarantee for numbers generated from different random states.
+
+*** Macro: unsigned long scm_c_uniform32 (scm_rstate *STATE)
+Return 32 random bits.
+
+*** Function: double scm_c_uniform01 (scm_rstate *STATE)
+Return a sample from the uniform(0,1) distribution.
+
+*** Function: double scm_c_normal01 (scm_rstate *STATE)
+Return a sample from the normal(0,1) distribution.
+
+*** Function: double scm_c_exp1 (scm_rstate *STATE)
+Return a sample from the exp(1) distribution.
+
+*** Function: unsigned long scm_c_random (scm_rstate *STATE, unsigned long M)
+Return a sample from the discrete uniform(0,M) distribution.
+
+*** Function: SCM scm_c_random_bignum (scm_rstate *STATE, SCM M)
+Return a sample from the discrete uniform(0,M) distribution.
+M must be a bignum object. The returned value may be an INUM.
+
+
+\f
+Changes in Guile 1.3 (released Monday, October 19, 1998):
+
+* Changes to the distribution
+
+** We renamed the SCHEME_LOAD_PATH environment variable to GUILE_LOAD_PATH.
+To avoid conflicts, programs should name environment variables after
+themselves, except when there's a common practice establishing some
+other convention.
+
+For now, Guile supports both GUILE_LOAD_PATH and SCHEME_LOAD_PATH,
+giving the former precedence, and printing a warning message if the
+latter is set. Guile 1.4 will not recognize SCHEME_LOAD_PATH at all.
+
+** The header files related to multi-byte characters have been removed.
+They were: libguile/extchrs.h and libguile/mbstrings.h. Any C code
+which referred to these explicitly will probably need to be rewritten,
+since the support for the variant string types has been removed; see
+below.
+
+** The header files append.h and sequences.h have been removed. These
+files implemented non-R4RS operations which would encourage
+non-portable programming style and less easy-to-read code.
+
+* Changes to the stand-alone interpreter
+
+** New procedures have been added to implement a "batch mode":
+
+*** Function: batch-mode?
Returns a boolean indicating whether the interpreter is in batch
mode.
-Function: set-batch-mode?! ARG
+*** Function: set-batch-mode?! ARG
If ARG is true, switches the interpreter to batch mode. The `#f'
case has not been implemented.
+** Guile now provides full command-line editing, when run interactively.
+To use this feature, you must have the readline library installed.
+The Guile build process will notice it, and automatically include
+support for it.
+
+The readline library is available via anonymous FTP from any GNU
+mirror site; the canonical location is "ftp://prep.ai.mit.edu/pub/gnu".
+
+** the-last-stack is now a fluid.
+
* Changes to the procedure for linking libguile with your programs
+** You can now use the `guile-config' utility to build programs that use Guile.
+
+Guile now includes a command-line utility called `guile-config', which
+can provide information about how to compile and link programs that
+use Guile.
+
+*** `guile-config compile' prints any C compiler flags needed to use Guile.
+You should include this command's output on the command line you use
+to compile C or C++ code that #includes the Guile header files. It's
+usually just a `-I' flag to help the compiler find the Guile headers.
+
+
+*** `guile-config link' prints any linker flags necessary to link with Guile.
+
+This command writes to its standard output a list of flags which you
+must pass to the linker to link your code against the Guile library.
+The flags include '-lguile' itself, any other libraries the Guile
+library depends upon, and any `-L' flags needed to help the linker
+find those libraries.
+
+For example, here is a Makefile rule that builds a program named 'foo'
+from the object files ${FOO_OBJECTS}, and links them against Guile:
+
+ foo: ${FOO_OBJECTS}
+ ${CC} ${CFLAGS} ${FOO_OBJECTS} `guile-config link` -o foo
+
+Previous Guile releases recommended that you use autoconf to detect
+which of a predefined set of libraries were present on your system.
+It is more robust to use `guile-config', since it records exactly which
+libraries the installed Guile library requires.
+
+This was originally called `build-guile', but was renamed to
+`guile-config' before Guile 1.3 was released, to be consistent with
+the analogous script for the GTK+ GUI toolkit, which is called
+`gtk-config'.
+
+
+** Use the GUILE_FLAGS macro in your configure.in file to find Guile.
+
+If you are using the GNU autoconf package to configure your program,
+you can use the GUILE_FLAGS autoconf macro to call `guile-config'
+(described above) and gather the necessary values for use in your
+Makefiles.
+
+The GUILE_FLAGS macro expands to configure script code which runs the
+`guile-config' script, to find out where Guile's header files and
+libraries are installed. It sets two variables, marked for
+substitution, as by AC_SUBST.
+
+ GUILE_CFLAGS --- flags to pass to a C or C++ compiler to build
+ code that uses Guile header files. This is almost always just a
+ -I flag.
+
+ GUILE_LDFLAGS --- flags to pass to the linker to link a
+ program against Guile. This includes `-lguile' for the Guile
+ library itself, any libraries that Guile itself requires (like
+ -lqthreads), and so on. It may also include a -L flag to tell the
+ compiler where to find the libraries.
+
+GUILE_FLAGS is defined in the file guile.m4, in the top-level
+directory of the Guile distribution. You can copy it into your
+package's aclocal.m4 file, and then use it in your configure.in file.
+
+If you are using the `aclocal' program, distributed with GNU automake,
+to maintain your aclocal.m4 file, the Guile installation process
+installs guile.m4 where aclocal will find it. All you need to do is
+use GUILE_FLAGS in your configure.in file, and then run `aclocal';
+this will copy the definition of GUILE_FLAGS into your aclocal.m4
+file.
+
+
* Changes to Scheme functions and syntax
** Multi-byte strings have been removed, as have multi-byte and wide
-ports.
+ports. We felt that these were the wrong approach to
+internationalization support.
+
+** New function: readline [PROMPT]
+Read a line from the terminal, and allow the user to edit it,
+prompting with PROMPT. READLINE provides a large set of Emacs-like
+editing commands, lets the user recall previously typed lines, and
+works on almost every kind of terminal, including dumb terminals.
+
+READLINE assumes that the cursor is at the beginning of the line when
+it is invoked. Thus, you can't print a prompt yourself, and then call
+READLINE; you need to package up your prompt as a string, pass it to
+the function, and let READLINE print the prompt itself. This is
+because READLINE needs to know the prompt's screen width.
+
+For Guile to provide this function, you must have the readline
+library, version 2.1 or later, installed on your system. Readline is
+available via anonymous FTP from prep.ai.mit.edu in pub/gnu, or from
+any GNU mirror site.
+
+See also ADD-HISTORY function.
+
+** New function: add-history STRING
+Add STRING as the most recent line in the history used by the READLINE
+command. READLINE does not add lines to the history itself; you must
+call ADD-HISTORY to make previous input available to the user.
+
+** The behavior of the read-line function has changed.
+
+This function now uses standard C library functions to read the line,
+for speed. This means that it doesn not respect the value of
+scm-line-incrementors; it assumes that lines are delimited with
+#\newline.
+
+(Note that this is read-line, the function that reads a line of text
+from a port, not readline, the function that reads a line from a
+terminal, providing full editing capabilities.)
+
+** New module (ice-9 getopt-gnu-style): Parse command-line arguments.
+
+This module provides some simple argument parsing. It exports one
+function:
+
+Function: getopt-gnu-style ARG-LS
+ Parse a list of program arguments into an alist of option
+ descriptions.
+
+ Each item in the list of program arguments is examined to see if
+ it meets the syntax of a GNU long-named option. An argument like
+ `--MUMBLE' produces an element of the form (MUMBLE . #t) in the
+ returned alist, where MUMBLE is a keyword object with the same
+ name as the argument. An argument like `--MUMBLE=FROB' produces
+ an element of the form (MUMBLE . FROB), where FROB is a string.
+
+ As a special case, the returned alist also contains a pair whose
+ car is the symbol `rest'. The cdr of this pair is a list
+ containing all the items in the argument list that are not options
+ of the form mentioned above.
+
+ The argument `--' is treated specially: all items in the argument
+ list appearing after such an argument are not examined, and are
+ returned in the special `rest' list.
+
+ This function does not parse normal single-character switches.
+ You will need to parse them out of the `rest' list yourself.
+
+** The read syntax for byte vectors and short vectors has changed.
+
+Instead of #bytes(...), write #y(...).
+
+Instead of #short(...), write #h(...).
+
+This may seem nutty, but, like the other uniform vectors, byte vectors
+and short vectors want to have the same print and read syntax (and,
+more basic, want to have read syntax!). Changing the read syntax to
+use multiple characters after the hash sign breaks with the
+conventions used in R5RS and the conventions used for the other
+uniform vectors. It also introduces complexity in the current reader,
+both on the C and Scheme levels. (The Right solution is probably to
+change the syntax and prototypes for uniform vectors entirely.)
+
+
+** The new module (ice-9 session) provides useful interactive functions.
+
+*** New procedure: (apropos REGEXP OPTION ...)
+
+Display a list of top-level variables whose names match REGEXP, and
+the modules they are imported from. Each OPTION should be one of the
+following symbols:
+
+ value --- Show the value of each matching variable.
+ shadow --- Show bindings shadowed by subsequently imported modules.
+ full --- Same as both `shadow' and `value'.
+
+For example:
+
+ guile> (apropos "trace" 'full)
+ debug: trace #<procedure trace args>
+ debug: untrace #<procedure untrace args>
+ the-scm-module: display-backtrace #<compiled-closure #<primitive-procedure gsubr-apply>>
+ the-scm-module: before-backtrace-hook ()
+ the-scm-module: backtrace #<primitive-procedure backtrace>
+ the-scm-module: after-backtrace-hook ()
+ the-scm-module: has-shown-backtrace-hint? #f
+ guile>
+
+** There are new functions and syntax for working with macros.
+
+Guile implements macros as a special object type. Any variable whose
+top-level binding is a macro object acts as a macro. The macro object
+specifies how the expression should be transformed before evaluation.
+
+*** Macro objects now print in a reasonable way, resembling procedures.
+
+*** New function: (macro? OBJ)
+True iff OBJ is a macro object.
+
+*** New function: (primitive-macro? OBJ)
+Like (macro? OBJ), but true only if OBJ is one of the Guile primitive
+macro transformers, implemented in eval.c rather than Scheme code.
+
+Why do we have this function?
+- For symmetry with procedure? and primitive-procedure?,
+- to allow custom print procedures to tell whether a macro is
+ primitive, and display it differently, and
+- to allow compilers and user-written evaluators to distinguish
+ builtin special forms from user-defined ones, which could be
+ compiled.
+
+*** New function: (macro-type OBJ)
+Return a value indicating what kind of macro OBJ is. Possible return
+values are:
+
+ The symbol `syntax' --- a macro created by procedure->syntax.
+ The symbol `macro' --- a macro created by procedure->macro.
+ The symbol `macro!' --- a macro created by procedure->memoizing-macro.
+ The boolean #f --- if OBJ is not a macro object.
+
+*** New function: (macro-name MACRO)
+Return the name of the macro object MACRO's procedure, as returned by
+procedure-name.
+
+*** New function: (macro-transformer MACRO)
+Return the transformer procedure for MACRO.
+
+*** New syntax: (use-syntax MODULE ... TRANSFORMER)
+
+Specify a new macro expander to use in the current module. Each
+MODULE is a module name, with the same meaning as in the `use-modules'
+form; each named module's exported bindings are added to the current
+top-level environment. TRANSFORMER is an expression evaluated in the
+resulting environment which must yield a procedure to use as the
+module's eval transformer: every expression evaluated in this module
+is passed to this function, and the result passed to the Guile
+interpreter.
+
+*** macro-eval! is removed. Use local-eval instead.
** Some magic has been added to the printer to better handle user
written printing routines (like record printers, closure printers).
The problem is that these user written routines must have access to
-the current `prine-state' to be able to handle fancy things like
+the current `print-state' to be able to handle fancy things like
detection of circular references. These print-states have to be
passed to the builtin printing routines (display, write, etc) to
properly continue the print chain.
We didn't want to change all existing print code so that it
-explicitely passes thru a print state in addition to a port. Instead,
+explicitly passes thru a print state in addition to a port. Instead,
we extented the possible values that the builtin printing routines
accept as a `port'. In addition to a normal port, they now also take
a pair of a normal port and a print-state. Printing will go to the
fluids are not special variables but ordinary objects. FLUID
should evaluate to a fluid.
-** Removed procedures:
-
-list-length, list-append, list-append!, list-reverse, list-reverse!
-
-** array-map renamed to array-map!
-
-** serial-array-map renamed to serial-array-map!
-
-* Changes to system call interfaces:
+** Changes to system call interfaces:
-** close-port, close-input-port and close-output-port now return a
+*** close-port, close-input-port and close-output-port now return a
boolean instead of an `unspecified' object. #t means that the port
was successfully closed, while #f means it was already closed. It is
also now possible for these procedures to raise an exception if an
error occurs (some errors from write can be delayed until close.)
-** the first argument to chmod, fcntl, ftell and fseek can now be a
+*** the first argument to chmod, fcntl, ftell and fseek can now be a
file descriptor.
-** the third argument to fcntl is now optional.
+*** the third argument to fcntl is now optional.
-** the first argument to chown can now be a file descriptor or a port.
+*** the first argument to chown can now be a file descriptor or a port.
-** the argument to stat can now be a port.
+*** the argument to stat can now be a port.
-** The following new procedures have been added (most use scsh
+*** The following new procedures have been added (most use scsh
interfaces):
-** procedure: close PORT/FD
+*** procedure: close PORT/FD
Similar to close-port (*note close-port: Closing Ports.), but also
works on file descriptors. A side effect of closing a file
descriptor is that any ports using that file descriptor are moved
to a different file descriptor and have their revealed counts set
to zero.
-** procedure: port->fdes PORT
+*** procedure: port->fdes PORT
Returns the integer file descriptor underlying PORT. As a side
effect the revealed count of PORT is incremented.
-** procedure: fdes->ports FDES
+*** procedure: fdes->ports FDES
Returns a list of existing ports which have FDES as an underlying
file descriptor, without changing their revealed counts.
-** procedure: fdes->inport FDES
+*** procedure: fdes->inport FDES
Returns an existing input port which has FDES as its underlying
file descriptor, if one exists, and increments its revealed count.
Otherwise, returns a new input port with a revealed count of 1.
-** procedure: fdes->outport FDES
+*** procedure: fdes->outport FDES
Returns an existing output port which has FDES as its underlying
file descriptor, if one exists, and increments its revealed count.
Otherwise, returns a new output port with a revealed count of 1.
any ports using NEWFD are moved to a different file descriptor and have
their revealed counts set to zero.
-** procedure: dup->fdes PORT/FD [NEWFD]
+*** procedure: dup->fdes PORT/FD [NEWFD]
Returns an integer file descriptor.
-** procedure: dup->inport PORT/FD [NEWFD]
+*** procedure: dup->inport PORT/FD [NEWFD]
Returns a new input port using the new file descriptor.
-** procedure: dup->outport PORT/FD [NEWFD]
+*** procedure: dup->outport PORT/FD [NEWFD]
Returns a new output port using the new file descriptor.
-** procedure: dup PORT/FD [NEWFD]
+*** procedure: dup PORT/FD [NEWFD]
Returns a new port if PORT/FD is a port, with the same mode as the
supplied port, otherwise returns an integer file descriptor.
-** procedure: dup->port PORT/FD MODE [NEWFD]
+*** procedure: dup->port PORT/FD MODE [NEWFD]
Returns a new port using the new file descriptor. MODE supplies a
mode string for the port (*note open-file: File Ports.).
-** procedure: setenv NAME VALUE
+*** procedure: setenv NAME VALUE
Modifies the environment of the current process, which is also the
default environment inherited by child processes.
The return value is unspecified.
-** procedure: truncate-file OBJ SIZE
+*** procedure: truncate-file OBJ SIZE
Truncates the file referred to by OBJ to at most SIZE bytes. OBJ
can be a string containing a file name or an integer file
descriptor or port open for output on the file. The underlying
The return value is unspecified.
-** procedure: setvbuf PORT MODE [SIZE]
+*** procedure: setvbuf PORT MODE [SIZE]
Set the buffering mode for PORT. MODE can be:
`_IONBF'
non-buffered
size. Procedures e.g., *Note open-file: File Ports, which accept a
mode string allow `0' to be added to request an unbuffered port.
-** procedure: fsync PORT/FD
+*** procedure: fsync PORT/FD
Copies any unwritten data for the specified output file descriptor
to disk. If PORT/FD is a port, its buffer is flushed before the
underlying file descriptor is fsync'd. The return value is
unspecified.
-** procedure: open-fdes PATH FLAGS [MODES]
+*** procedure: open-fdes PATH FLAGS [MODES]
Similar to `open' but returns a file descriptor instead of a port.
-** procedure: execle PATH ENV [ARG] ...
+*** procedure: execle PATH ENV [ARG] ...
Similar to `execl', but the environment of the new process is
specified by ENV, which must be a list of strings as returned by
the `environ' procedure.
call, but we call it `execle' because of its Scheme calling
interface.
-** procedure: strerror ERRNO
+*** procedure: strerror ERRNO
Returns the Unix error message corresponding to ERRNO, an integer.
-** procedure: primitive-exit [STATUS]
+*** procedure: primitive-exit [STATUS]
Terminate the current process without unwinding the Scheme stack.
This is would typically be useful after a fork. The exit status
is STATUS if supplied, otherwise zero.
-** procedure: times
+*** procedure: times
Returns an object with information about real and processor time.
The following procedures accept such an object as an argument and
return a selected component:
Similarly, the CPU times units used by the system on behalf of
terminated child processes.
+** Removed: list-length
+** Removed: list-append, list-append!
+** Removed: list-reverse, list-reverse!
+
+** array-map renamed to array-map!
+
+** serial-array-map renamed to serial-array-map!
+
+** catch doesn't take #f as first argument any longer
+
+Previously, it was possible to pass #f instead of a key to `catch'.
+That would cause `catch' to pass a jump buffer object to the procedure
+passed as second argument. The procedure could then use this jump
+buffer objekt as an argument to throw.
+
+This mechanism has been removed since its utility doesn't motivate the
+extra complexity it introduces.
+
+** The `#/' notation for lists now provokes a warning message from Guile.
+This syntax will be removed from Guile in the near future.
+
+To disable the warning message, set the GUILE_HUSH environment
+variable to any non-empty value.
+
+** The newline character now prints as `#\newline', following the
+normal Scheme notation, not `#\nl'.
+
* Changes to the gh_ interface
+** The gh_enter function now takes care of loading the Guile startup files.
+gh_enter works by calling scm_boot_guile; see the remarks below.
+
** Function: void gh_write (SCM x)
Write the printed representation of the scheme object x to the current
Implemented several of the R4RS pair and list functions that were
missing.
+** gh_scm2doubles, gh_doubles2scm, gh_doubles2dvect
+
+New function. Converts double arrays back and forth between Scheme
+and C.
+
* Changes to the scm_ interface
+** The function scm_boot_guile now takes care of loading the startup files.
+
+Guile's primary initialization function, scm_boot_guile, now takes
+care of loading `boot-9.scm', in the `ice-9' module, to initialize
+Guile, define the module system, and put together some standard
+bindings. It also loads `init.scm', which is intended to hold
+site-specific initialization code.
+
+Since Guile cannot operate properly until boot-9.scm is loaded, there
+is no reason to separate loading boot-9.scm from Guile's other
+initialization processes.
+
+This job used to be done by scm_compile_shell_switches, which didn't
+make much sense; in particular, it meant that people using Guile for
+non-shell-like applications had to jump through hoops to get Guile
+initialized properly.
+
+** The function scm_compile_shell_switches no longer loads the startup files.
+Now, Guile always loads the startup files, whenever it is initialized;
+see the notes above for scm_boot_guile and scm_load_startup_files.
+
+** Function: scm_load_startup_files
+This new function takes care of loading Guile's initialization file
+(`boot-9.scm'), and the site initialization file, `init.scm'. Since
+this is always called by the Guile initialization process, it's
+probably not too useful to call this yourself, but it's there anyway.
+
+** The semantics of smob marking have changed slightly.
+
+The smob marking function (the `mark' member of the scm_smobfuns
+structure) is no longer responsible for setting the mark bit on the
+smob. The generic smob handling code in the garbage collector will
+set this bit. The mark function need only ensure that any other
+objects the smob refers to get marked.
+
+Note that this change means that the smob's GC8MARK bit is typically
+already set upon entry to the mark function. Thus, marking functions
+which look like this:
+
+ {
+ if (SCM_GC8MARKP (ptr))
+ return SCM_BOOL_F;
+ SCM_SETGC8MARK (ptr);
+ ... mark objects to which the smob refers ...
+ }
+
+are now incorrect, since they will return early, and fail to mark any
+other objects the smob refers to. Some code in the Guile library used
+to work this way.
+
+** The semantics of the I/O port functions in scm_ptobfuns have changed.
+
+If you have implemented your own I/O port type, by writing the
+functions required by the scm_ptobfuns and then calling scm_newptob,
+you will need to change your functions slightly.
+
+The functions in a scm_ptobfuns structure now expect the port itself
+as their argument; they used to expect the `stream' member of the
+port's scm_port_table structure. This allows functions in an
+scm_ptobfuns structure to easily access the port's cell (and any flags
+it its CAR), and the port's scm_port_table structure.
+
+Guile now passes the I/O port itself as the `port' argument in the
+following scm_ptobfuns functions:
+
+ int (*free) (SCM port);
+ int (*fputc) (int, SCM port);
+ int (*fputs) (char *, SCM port);
+ scm_sizet (*fwrite) SCM_P ((char *ptr,
+ scm_sizet size,
+ scm_sizet nitems,
+ SCM port));
+ int (*fflush) (SCM port);
+ int (*fgetc) (SCM port);
+ int (*fclose) (SCM port);
+
+The interfaces to the `mark', `print', `equalp', and `fgets' methods
+are unchanged.
+
+If you have existing code which defines its own port types, it is easy
+to convert your code to the new interface; simply apply SCM_STREAM to
+the port argument to yield the value you code used to expect.
+
+Note that since both the port and the stream have the same type in the
+C code --- they are both SCM values --- the C compiler will not remind
+you if you forget to update your scm_ptobfuns functions.
+
+
+** Function: int scm_internal_select (int fds,
+ SELECT_TYPE *rfds,
+ SELECT_TYPE *wfds,
+ SELECT_TYPE *efds,
+ struct timeval *timeout);
+
+This is a replacement for the `select' function provided by the OS.
+It enables I/O blocking and sleeping to happen for one cooperative
+thread without blocking other threads. It also avoids busy-loops in
+these situations. It is intended that all I/O blocking and sleeping
+will finally go through this function. Currently, this function is
+only available on systems providing `gettimeofday' and `select'.
+
** Function: SCM scm_internal_stack_catch (SCM tag,
scm_catch_body_t body,
void *body_data,
use advanced error reporting, such as calling scm_display_error and
scm_display_backtrace. (They both take a stack object as argument.)
+** Function: SCM scm_spawn_thread (scm_catch_body_t body,
+ void *body_data,
+ scm_catch_handler_t handler,
+ void *handler_data)
+
+Spawns a new thread. It does a job similar to
+scm_call_with_new_thread but takes arguments more suitable when
+spawning threads from application C code.
+
** The hook scm_error_callback has been removed. It was originally
intended as a way for the user to install his own error handler. But
that method works badly since it intervenes between throw and catch,
This means that the type codes scm_tc7_mb_string and
scm_tc7_mb_substring has been removed.
+** scm_gen_putc, scm_gen_puts, scm_gen_write, and scm_gen_getc have changed.
+
+Since we no longer support multi-byte strings, these I/O functions
+have been simplified, and renamed. Here are their old names, and
+their new names and arguments:
+
+scm_gen_putc -> void scm_putc (int c, SCM port);
+scm_gen_puts -> void scm_puts (char *s, SCM port);
+scm_gen_write -> void scm_lfwrite (char *ptr, scm_sizet size, SCM port);
+scm_gen_getc -> void scm_getc (SCM port);
+
+
** The macros SCM_TYP7D and SCM_TYP7SD has been removed.
** The macro SCM_TYP7S has taken the role of the old SCM_TYP7D
SCM_TYP7S now masks away the bit which distinguishes substrings from
strings.
-** All genio functions changed names and interfaces; new functions are
-scm_putc, scm_puts, scm_lfwrite, scm_getc, scm_ungetc, and
-scm_do_read_line.
+** scm_catch_body_t: Backward incompatible change!
+
+Body functions to scm_internal_catch and friends do not any longer
+take a second argument. This is because it is no longer possible to
+pass a #f arg to catch.
+
+** Calls to scm_protect_object and scm_unprotect now nest properly.
+
+The function scm_protect_object protects its argument from being freed
+by the garbage collector. scm_unprotect_object removes that
+protection.
+
+These functions now nest properly. That is, for every object O, there
+is a counter which scm_protect_object(O) increments and
+scm_unprotect_object(O) decrements, if the counter is greater than
+zero. Every object's counter is zero when it is first created. If an
+object's counter is greater than zero, the garbage collector will not
+reclaim its storage.
+
+This allows you to use scm_protect_object in your code without
+worrying that some other function you call will call
+scm_unprotect_object, and allow it to be freed. Assuming that the
+functions you call are well-behaved, and unprotect only those objects
+they protect, you can follow the same rule and have confidence that
+objects will be freed only at appropriate times.
\f
Changes in Guile 1.2 (released Tuesday, June 24 1997):
to a Scheme port object.
** The new function `scm_set_program_arguments' allows C code to set
-the value teruturned by the Scheme `program-arguments' function.
+the value returned by the Scheme `program-arguments' function.
\f
Older changes:
HCoop / bpt / guile.git / blobdiff