-/* Copyright (C) 2009 Free Software Foundation, Inc.
+/* Copyright (C) 2009, 2010, 2011, 2013 Free Software Foundation, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
scm_t_port *c_port;
const unsigned long mode_bits = SCM_OPN | SCM_RDNG;
+ scm_i_scm_pthread_mutex_lock (&scm_i_port_table_mutex);
+
port = scm_new_port_table_entry (bytevector_input_port_type);
+ c_port = SCM_PTAB_ENTRY (port);
+
+ /* Match the expectation of `binary-port?'. */
+ c_port->encoding = NULL;
/* Prevent BV from being GC'd. */
SCM_SETSTREAM (port, SCM_UNPACK (bv));
c_bv = (char *) SCM_BYTEVECTOR_CONTENTS (bv);
c_len = SCM_BYTEVECTOR_LENGTH (bv);
- c_port = SCM_PTAB_ENTRY (port);
c_port->read_pos = c_port->read_buf = (unsigned char *) c_bv;
c_port->read_end = (unsigned char *) c_bv + c_len;
c_port->read_buf_size = c_len;
/* Mark PORT as open, readable and unbuffered (hmm, how elegant...). */
SCM_SET_CELL_TYPE (port, bytevector_input_port_type | mode_bits);
+ scm_i_pthread_mutex_unlock (&scm_i_port_table_mutex);
+
return port;
}
/* Fall through. */
case SEEK_SET:
- if (c_port->read_buf + offset < c_port->read_end)
+ if (c_port->read_buf + offset <= c_port->read_end)
{
c_port->read_pos = c_port->read_buf + offset;
c_result = offset;
SCM_SIMPLE_VECTOR_SET (method_vector, 2, set_position_proc);
SCM_SIMPLE_VECTOR_SET (method_vector, 3, close_proc);
+ scm_i_pthread_mutex_lock (&scm_i_port_table_mutex);
+
port = scm_new_port_table_entry (custom_binary_input_port_type);
+ c_port = SCM_PTAB_ENTRY (port);
+
+ /* Match the expectation of `binary-port?'. */
+ c_port->encoding = NULL;
/* Attach it the method vector. */
SCM_SETSTREAM (port, SCM_UNPACK (method_vector));
/* Have the port directly access the buffer (bytevector). */
- c_port = SCM_PTAB_ENTRY (port);
c_port->read_pos = c_port->read_buf = (unsigned char *) c_bv;
c_port->read_end = (unsigned char *) c_bv;
c_port->read_buf_size = c_len;
/* Mark PORT as open, readable and unbuffered (hmm, how elegant...). */
SCM_SET_CELL_TYPE (port, custom_binary_input_port_type | mode_bits);
+ scm_i_pthread_mutex_unlock (&scm_i_port_table_mutex);
+
return port;
}
SCM_VALIDATE_BINARY_INPUT_PORT (1, port);
- c_result = scm_getc (port);
+ c_result = scm_get_byte_or_eof (port);
if (c_result == EOF)
result = SCM_EOF_VAL;
else
"point past the octet.")
#define FUNC_NAME s_scm_lookahead_u8
{
+ int u8;
SCM result;
SCM_VALIDATE_BINARY_INPUT_PORT (1, port);
- result = scm_peek_char (port);
- if (SCM_CHARP (result))
- result = SCM_I_MAKINUM ((signed char) SCM_CHAR (result));
- else
+ u8 = scm_peek_byte_or_eof (port);
+ if (u8 == EOF)
result = SCM_EOF_VAL;
+ else
+ result = SCM_I_MAKINUM ((scm_t_uint8) u8);
return result;
}
if ((c_read == 0) && (c_count > 0))
{
- if (SCM_EOF_OBJECT_P (scm_peek_char (port)))
+ if (scm_peek_byte_or_eof (port) == EOF)
result = SCM_EOF_VAL;
else
result = scm_null_bytevector;
if ((c_read == 0) && (c_count > 0))
{
- if (SCM_EOF_OBJECT_P (scm_peek_char (port)))
+ if (scm_peek_byte_or_eof (port) == EOF)
result = SCM_EOF_VAL;
else
result = SCM_I_MAKINUM (0);
}
/* We can't use `scm_c_read ()' since it blocks. */
- c_chr = scm_getc (port);
+ c_chr = scm_get_byte_or_eof (port);
if (c_chr != EOF)
{
c_bv[c_total] = (char) c_chr;
c_total++;
}
}
- while ((scm_is_true (scm_char_ready_p (port)))
- && (!SCM_EOF_OBJECT_P (scm_peek_char (port))));
+ /* XXX: We want to check for the availability of a byte, but that's
+ what `scm_char_ready_p' actually does. */
+ while (scm_is_true (scm_char_ready_p (port))
+ && (scm_peek_byte_or_eof (port) != EOF));
if (c_total == 0)
{
c_len = (unsigned) c_total;
}
- result = scm_c_take_bytevector ((signed char *) c_bv, c_len);
+ result = scm_c_take_gc_bytevector ((signed char *) c_bv, c_len);
}
return result;
c_read = scm_c_read (port, c_bv + c_total, c_count);
c_total += c_read, c_count -= c_read;
}
- while (!SCM_EOF_OBJECT_P (scm_peek_char (port)));
+ while (scm_peek_byte_or_eof (port) != EOF);
if (c_total == 0)
{
c_len = (unsigned) c_total;
}
- result = scm_c_take_bytevector ((signed char *) c_bv, c_len);
+ result = scm_c_take_gc_bytevector ((signed char *) c_bv, c_len);
}
return result;
c_len = SCM_BYTEVECTOR_LENGTH (bv);
c_bv = (char *) SCM_BYTEVECTOR_CONTENTS (bv);
- if (start != SCM_UNDEFINED)
+ if (!scm_is_eq (start, SCM_UNDEFINED))
{
c_start = scm_to_uint (start);
- if (count != SCM_UNDEFINED)
+ if (!scm_is_eq (count, SCM_UNDEFINED))
{
c_count = scm_to_uint (count);
if (SCM_UNLIKELY (c_start + c_count > c_len))
scm_t_bop_buffer *buf;
const unsigned long mode_bits = SCM_OPN | SCM_WRTNG;
+ scm_i_pthread_mutex_lock (&scm_i_port_table_mutex);
+
port = scm_new_port_table_entry (bytevector_output_port_type);
+ c_port = SCM_PTAB_ENTRY (port);
+
+ /* Match the expectation of `binary-port?'. */
+ c_port->encoding = NULL;
buf = (scm_t_bop_buffer *) scm_gc_malloc (sizeof (* buf), SCM_GC_BOP);
bop_buffer_init (buf);
- c_port = SCM_PTAB_ENTRY (port);
c_port->write_buf = c_port->write_pos = c_port->write_end = NULL;
c_port->write_buf_size = 0;
/* Mark PORT as open and writable. */
SCM_SET_CELL_TYPE (port, bytevector_output_port_type | mode_bits);
+ scm_i_pthread_mutex_unlock (&scm_i_port_table_mutex);
+
/* Make the bop procedure. */
- SCM_NEWSMOB (bop_proc, bytevector_output_port_procedure,
- SCM_PACK (port));
+ SCM_NEWSMOB (bop_proc, bytevector_output_port_procedure, buf);
return (scm_values (scm_list_2 (port, bop_proc)));
}
SCM_SMOB_APPLY (bytevector_output_port_procedure,
bop_proc_apply, 0, 0, 0, (SCM bop_proc))
{
- SCM port, bv;
+ SCM bv;
scm_t_bop_buffer *buf, result_buf;
- port = SCM_PACK (SCM_SMOB_DATA (bop_proc));
- buf = SCM_BOP_BUFFER (port);
+ buf = (scm_t_bop_buffer *) SCM_SMOB_DATA (bop_proc);
result_buf = *buf;
bop_buffer_init (buf);
if (result_buf.len == 0)
- bv = scm_c_take_bytevector (NULL, 0);
+ bv = scm_c_take_gc_bytevector (NULL, 0);
else
{
if (result_buf.total_len > result_buf.len)
result_buf.len,
SCM_GC_BOP);
- bv = scm_c_take_bytevector ((signed char *) result_buf.buffer,
- result_buf.len);
+ bv = scm_c_take_gc_bytevector ((signed char *) result_buf.buffer,
+ result_buf.len);
}
return bv;
SCM_SIMPLE_VECTOR_SET (method_vector, 2, set_position_proc);
SCM_SIMPLE_VECTOR_SET (method_vector, 3, close_proc);
+ scm_i_pthread_mutex_lock (&scm_i_port_table_mutex);
+
port = scm_new_port_table_entry (custom_binary_output_port_type);
+ c_port = SCM_PTAB_ENTRY (port);
+
+ /* Match the expectation of `binary-port?'. */
+ c_port->encoding = NULL;
/* Attach it the method vector. */
SCM_SETSTREAM (port, SCM_UNPACK (method_vector));
/* Have the port directly access the buffer (bytevector). */
- c_port = SCM_PTAB_ENTRY (port);
c_port->write_buf = c_port->write_pos = c_port->write_end = NULL;
c_port->write_buf_size = c_port->read_buf_size = 0;
/* Mark PORT as open, writable and unbuffered. */
SCM_SET_CELL_TYPE (port, custom_binary_output_port_type | mode_bits);
+ scm_i_pthread_mutex_unlock (&scm_i_port_table_mutex);
+
return port;
}
}
\f
+/* Transcoded ports ("tp" for short). */
+static scm_t_bits transcoded_port_type = 0;
+
+#define TP_INPUT_BUFFER_SIZE 4096
+
+#define SCM_TP_BINARY_PORT(_port) SCM_PACK (SCM_STREAM (_port))
+
+static inline SCM
+make_tp (SCM binary_port, unsigned long mode)
+{
+ SCM port;
+ scm_t_port *c_port;
+ const unsigned long mode_bits = SCM_OPN | mode;
+
+ scm_i_pthread_mutex_lock (&scm_i_port_table_mutex);
+
+ port = scm_new_port_table_entry (transcoded_port_type);
+
+ SCM_SETSTREAM (port, SCM_UNPACK (binary_port));
+
+ SCM_SET_CELL_TYPE (port, transcoded_port_type | mode_bits);
+
+ if (SCM_INPUT_PORT_P (port))
+ {
+ c_port = SCM_PTAB_ENTRY (port);
+ c_port->read_buf = scm_gc_malloc_pointerless (TP_INPUT_BUFFER_SIZE,
+ "port buffer");
+ c_port->read_pos = c_port->read_end = c_port->read_buf;
+ c_port->read_buf_size = TP_INPUT_BUFFER_SIZE;
+
+ SCM_SET_CELL_WORD_0 (port, SCM_CELL_WORD_0 (port) & ~SCM_BUF0);
+ }
+
+ scm_i_pthread_mutex_unlock (&scm_i_port_table_mutex);
+
+ return port;
+}
+
+static void
+tp_write (SCM port, const void *data, size_t size)
+{
+ scm_c_write (SCM_TP_BINARY_PORT (port), data, size);
+}
+
+static int
+tp_fill_input (SCM port)
+{
+ size_t count;
+ scm_t_port *c_port = SCM_PTAB_ENTRY (port);
+ SCM bport = SCM_TP_BINARY_PORT (port);
+ scm_t_port *c_bport = SCM_PTAB_ENTRY (bport);
+
+ /* We can't use `scm_c_read' here, since it blocks until the whole
+ block has been read or EOF. */
+
+ if (c_bport->rw_active == SCM_PORT_WRITE)
+ scm_force_output (bport);
+
+ if (c_bport->read_pos >= c_bport->read_end)
+ scm_fill_input (bport);
+
+ count = c_bport->read_end - c_bport->read_pos;
+ if (count > c_port->read_buf_size)
+ count = c_port->read_buf_size;
+
+ memcpy (c_port->read_buf, c_bport->read_pos, count);
+ c_bport->read_pos += count;
+
+ if (c_bport->rw_random)
+ c_bport->rw_active = SCM_PORT_READ;
+
+ if (count == 0)
+ return EOF;
+ else
+ {
+ c_port->read_pos = c_port->read_buf;
+ c_port->read_end = c_port->read_buf + count;
+ return *c_port->read_buf;
+ }
+}
+
+static void
+tp_flush (SCM port)
+{
+ SCM binary_port = SCM_TP_BINARY_PORT (port);
+ scm_t_port *c_port = SCM_PTAB_ENTRY (port);
+ size_t count = c_port->write_pos - c_port->write_buf;
+
+ /* As the runtime will try to flush all ports upon exit, we test for
+ the underlying port still being open here. Otherwise, when you
+ would explicitly close the underlying port and the transcoded port
+ still had data outstanding, you'd get an exception on Guile exit.
+
+ We just throw away the data when the underlying port is closed. */
+
+ if (SCM_OPOUTPORTP (binary_port))
+ scm_c_write (binary_port, c_port->write_buf, count);
+
+ c_port->write_pos = c_port->write_buf;
+ c_port->rw_active = SCM_PORT_NEITHER;
+
+ if (SCM_OPOUTPORTP (binary_port))
+ scm_force_output (binary_port);
+}
+
+static int
+tp_close (SCM port)
+{
+ if (SCM_OUTPUT_PORT_P (port))
+ tp_flush (port);
+ return scm_is_true (scm_close_port (SCM_TP_BINARY_PORT (port))) ? 0 : -1;
+}
+
+static inline void
+initialize_transcoded_ports (void)
+{
+ transcoded_port_type =
+ scm_make_port_type ("r6rs-transcoded-port", tp_fill_input, tp_write);
+
+ scm_set_port_flush (transcoded_port_type, tp_flush);
+ scm_set_port_close (transcoded_port_type, tp_close);
+}
+
+SCM_DEFINE (scm_i_make_transcoded_port,
+ "%make-transcoded-port", 1, 0, 0,
+ (SCM port),
+ "Return a new port which reads and writes to @var{port}")
+#define FUNC_NAME s_scm_i_make_transcoded_port
+{
+ SCM result;
+ unsigned long mode = 0;
+
+ SCM_VALIDATE_PORT (SCM_ARG1, port);
+
+ if (scm_is_true (scm_output_port_p (port)))
+ mode |= SCM_WRTNG;
+ else if (scm_is_true (scm_input_port_p (port)))
+ mode |= SCM_RDNG;
+
+ result = make_tp (port, mode);
+
+ /* FIXME: We should actually close `port' "in a special way" here,
+ according to R6RS. As there is no way to do that in Guile without
+ rendering the underlying port unusable for our purposes as well, we
+ just leave it open. */
+
+ return result;
+}
+#undef FUNC_NAME
+
+\f
+/* Textual I/O */
+
+SCM_DEFINE (scm_get_string_n_x,
+ "get-string-n!", 4, 0, 0,
+ (SCM port, SCM str, SCM start, SCM count),
+ "Read up to @var{count} characters from @var{port} into "
+ "@var{str}, starting at @var{start}. If no characters "
+ "can be read before the end of file is encountered, the end "
+ "of file object is returned. Otherwise, the number of "
+ "characters read is returned.")
+#define FUNC_NAME s_scm_get_string_n_x
+{
+ size_t c_start, c_count, c_len, c_end, j;
+ scm_t_wchar c;
+
+ SCM_VALIDATE_OPINPORT (1, port);
+ SCM_VALIDATE_STRING (2, str);
+ c_len = scm_c_string_length (str);
+ c_start = scm_to_size_t (start);
+ c_count = scm_to_size_t (count);
+ c_end = c_start + c_count;
+
+ if (SCM_UNLIKELY (c_end > c_len))
+ scm_out_of_range (FUNC_NAME, count);
+
+ for (j = c_start; j < c_end; j++)
+ {
+ c = scm_getc (port);
+ if (c == EOF)
+ {
+ size_t chars_read = j - c_start;
+ return chars_read == 0 ? SCM_EOF_VAL : scm_from_size_t (chars_read);
+ }
+ scm_c_string_set_x (str, j, SCM_MAKE_CHAR (c));
+ }
+ return count;
+}
+#undef FUNC_NAME
+
+\f
/* Initialization. */
+void
+scm_register_r6rs_ports (void)
+{
+ scm_c_register_extension ("libguile-" SCM_EFFECTIVE_VERSION,
+ "scm_init_r6rs_ports",
+ (scm_t_extension_init_func) scm_init_r6rs_ports,
+ NULL);
+}
+
void
scm_init_r6rs_ports (void)
{
initialize_custom_binary_input_ports ();
initialize_bytevector_output_ports ();
initialize_custom_binary_output_ports ();
+ initialize_transcoded_ports ();
}
HCoop / bpt / guile.git / blobdiff