#endif
\f
-/* {Supported Options}
- *
- * These may be defined or undefined.
- */
-
-/* #define GUILE_DEBUG_FREELIST */
-
-
-/* Use engineering notation when converting numbers strings?
- */
-#undef ENGNOT
-
-\f
-/* {Unsupported Options}
- *
- * These must be defined as given here.
- */
-
-
-/* Guile Scheme supports the #f/() distinction; Guile Lisp won't. We
- have horrible plans for their unification. */
-#undef SICP
-
-\f
-
-/* Random options (not yet supported or in final form). */
-
-#define STACK_CHECKING
-#undef NO_CEVAL_STACK_CHECKING
-
-\f
/* SCM_API is a macro prepended to all function and data definitions
which should be exported from libguile. */
#define SCM_DEBUG 0
#endif
-/* For debugging purposes: define this is to ensure nobody is using
- * the mark bits outside of the marking phase. This is meant for
- * debugging purposes only.
- */
-#ifndef SCM_DEBUG_MARKING_API
-#define SCM_DEBUG_MARKING_API 0
-#endif
-
/* If SCM_DEBUG_CELL_ACCESSES is set to 1, cell accesses will perform
* exhaustive parameter checking: It will be verified that cell parameters
* actually point to a valid heap cell. Note: If this option is enabled,
#define SCM_DEBUG_CELL_ACCESSES SCM_DEBUG
#endif
-/* If SCM_DEBUG_INTERRUPTS is set to 1, with every deferring and allowing of
- * interrupts a consistency check will be performed.
- */
-#ifndef SCM_DEBUG_INTERRUPTS
-#define SCM_DEBUG_INTERRUPTS SCM_DEBUG
-#endif
-
/* If SCM_DEBUG_PAIR_ACCESSES is set to 1, accesses to cons cells will be
* exhaustively checked. Note: If this option is enabled, guile will run
* slower than normally.
#define SCM_DEBUG_TYPING_STRICTNESS 1
#endif
-/* If SCM_DEBUG_DEBUGGING_SUPPORT is set to 1, guile will provide a set of
- * special functions that support debugging with a debugger like gdb or
- * debugging of guile internals on the scheme level. The behaviour of guile
- * is not changed by this macro, only the set of functions that are available
- * will differ. All functions that are introduced this way have the prefix
- * 'scm_dbg_' on the C level and the prefix 'dbg-' on the scheme level. This
- * allows to easily determine the set of support functions, given that your
- * debugger or repl provide automatic name completion. Note that these
- * functions are intended to be used during interactive debugging sessions
- * only. They are not considered part of guile's official API. They may
- * change or disappear without notice or deprecation phase.
- */
-#ifndef SCM_DEBUG_DEBUGGING_SUPPORT
-#define SCM_DEBUG_DEBUGGING_SUPPORT SCM_DEBUG
-#endif
-
\f
/* {Feature Options}
#define SCM_T_INT64_MIN SCM_I_TYPE_MIN(scm_t_int64,SCM_T_UINT64_MAX)
#define SCM_T_INT64_MAX SCM_I_TYPE_MAX(scm_t_int64,SCM_T_UINT64_MAX)
-#if SCM_SIZEOF_LONG_LONG
-#define SCM_I_ULLONG_MAX SCM_I_UTYPE_MAX(unsigned long long)
-#define SCM_I_LLONG_MIN SCM_I_TYPE_MIN(long long,SCM_I_ULLONG_MAX)
-#define SCM_I_LLONG_MAX SCM_I_TYPE_MAX(long long,SCM_I_ULLONG_MAX)
-#endif
-
#define SCM_T_UINTMAX_MAX SCM_I_UTYPE_MAX(scm_t_uintmax)
#define SCM_T_INTMAX_MIN SCM_I_TYPE_MIN(scm_t_intmax,SCM_T_UINTMAX_MAX)
#define SCM_T_INTMAX_MAX SCM_I_TYPE_MAX(scm_t_intmax,SCM_T_UINTMAX_MAX)
#define SCM_T_INTPTR_MIN SCM_I_TYPE_MIN(scm_t_intptr,SCM_T_UINTPTR_MAX)
#define SCM_T_INTPTR_MAX SCM_I_TYPE_MAX(scm_t_intptr,SCM_T_UINTPTR_MAX)
-#define SCM_I_SIZE_MAX SCM_I_UTYPE_MAX(size_t)
-#define SCM_I_SSIZE_MIN SCM_I_TYPE_MIN(ssize_t,SCM_I_SIZE_MAX)
-#define SCM_I_SSIZE_MAX SCM_I_TYPE_MAX(ssize_t,SCM_I_SIZE_MAX)
-
\f
#include "libguile/tags.h"
#endif
\f
-#ifdef vms
-# ifndef CHEAP_CONTINUATIONS
- typedef int jmp_buf[17];
- extern int setjump(jmp_buf env);
- extern int longjump(jmp_buf env, int ret);
-# define setjmp setjump
-# define longjmp longjump
-# else
-# include <setjmp.h>
-# endif
-#else /* ndef vms */
-# ifdef _CRAY1
- typedef int jmp_buf[112];
- extern int setjump(jmp_buf env);
- extern int longjump(jmp_buf env, int ret);
-# define setjmp setjump
-# define longjmp longjump
-# else /* ndef _CRAY1 */
-# if defined (__ia64__)
-/* For IA64, emulate the setjmp API using getcontext. */
-# include <signal.h>
-# include <ucontext.h>
- typedef struct {
- ucontext_t ctx;
- int fresh;
- } scm_i_jmp_buf;
-# define SCM_I_SETJMP(JB) \
- ( (JB).fresh = 1, \
- getcontext (&((JB).ctx)), \
- ((JB).fresh ? ((JB).fresh = 0, 0) : 1) )
-# define SCM_I_LONGJMP(JB,VAL) scm_ia64_longjmp (&(JB), VAL)
- void scm_ia64_longjmp (scm_i_jmp_buf *, int);
-# else /* ndef __ia64__ */
-# include <setjmp.h>
-# endif /* ndef __ia64__ */
-# endif /* ndef _CRAY1 */
-#endif /* ndef vms */
-
-/* For any platform where SCM_I_SETJMP hasn't been defined in some
- special way above, map SCM_I_SETJMP, SCM_I_LONGJMP and
- scm_i_jmp_buf to setjmp, longjmp and jmp_buf. */
-#ifndef SCM_I_SETJMP
-#define scm_i_jmp_buf jmp_buf
-#define SCM_I_SETJMP setjmp
-#define SCM_I_LONGJMP longjmp
-#endif
-/* James Clark came up with this neat one instruction fix for
- * continuations on the SPARC. It flushes the register windows so
- * that all the state of the process is contained in the stack.
+/* scm_i_jmp_buf
+ *
+ * The corresponding SCM_I_SETJMP and SCM_I_LONGJMP are defined in the
+ * _scm.h private header.
*/
-#if defined (sparc) || defined (__sparc__) || defined (__sparc)
-# define SCM_FLUSH_REGISTER_WINDOWS asm("ta 3")
+#if defined (vms)
+typedef int scm_i_jmp_buf[17];
+
+#elif defined (_CRAY1)
+typedef int scm_i_jmp_buf[112];
+
+#elif defined (__ia64__)
+# include <signal.h>
+# include <ucontext.h>
+typedef struct {
+ ucontext_t ctx;
+ int fresh;
+} scm_i_jmp_buf;
+
#else
-# define SCM_FLUSH_REGISTER_WINDOWS /* empty */
+# include <setjmp.h>
+typedef jmp_buf scm_i_jmp_buf;
#endif
+
+\f
+
/* If stack is not longword aligned then
*/
#define SCM_STACK_PTR(ptr) ((SCM_STACKITEM *) (void *) (ptr))
\f
-SCM_API void scm_async_tick (void);
-
#ifdef BUILDING_LIBGUILE
-
-/* FIXME: should change names */
-# define SCM_ASYNC_TICK \
- do \
- { \
- if (SCM_UNLIKELY (SCM_I_CURRENT_THREAD->pending_asyncs)) \
- scm_async_click (); \
- } \
- while (0)
-
-/* SCM_ASYNC_TICK_WITH_CODE is only available to Guile itself */
-# define SCM_ASYNC_TICK_WITH_CODE(thr, stmt) \
- do \
- { \
- if (SCM_UNLIKELY (thr->pending_asyncs)) \
- { \
- stmt; \
- scm_async_click (); \
- } \
- } \
- while (0)
-
-#else /* !BUILDING_LIBGUILE */
-
-# define SCM_ASYNC_TICK (scm_async_tick ())
-
-#endif /* !BUILDING_LIBGUILE */
-
-
-/* Anthony Green writes:
- When the compiler sees...
- DEFER_INTS;
- [critical code here]
- ALLOW_INTS;
- ...it doesn't actually promise to keep the critical code within the
- boundries of the DEFER/ALLOW_INTS instructions. It may very well
- schedule it outside of the magic defined in those macros.
-
- However, GCC's volatile asm feature forms a barrier over which code is
- never moved. So if you add...
- asm ("");
- ...to each of the DEFER_INTS and ALLOW_INTS macros, the critical
- code will always remain in place. asm's without inputs or outputs
- are implicitly volatile. */
-#ifdef __GNUC__
-#define SCM_FENCE asm /* volatile */ ("")
-#elif defined (__INTEL_COMPILER) && defined (__ia64)
-#define SCM_FENCE __memory_barrier()
+#define SCM_TICK SCM_ASYNC_TICK
#else
-#define SCM_FENCE
+#define SCM_TICK scm_async_tick ()
#endif
-#define SCM_TICK \
-do { \
- SCM_ASYNC_TICK; \
- SCM_THREAD_SWITCHING_CODE; \
-} while (0)
-
\f
-/** SCM_ASSERT
- **
- **/
-
-
-#ifdef SCM_RECKLESS
-#define SCM_ASSERT(_cond, _arg, _pos, _subr)
-#define SCM_ASSERT_TYPE(_cond, _arg, _pos, _subr, _msg)
-#else
-#define SCM_ASSERT(_cond, _arg, _pos, _subr) \
- do { if (SCM_UNLIKELY (!(_cond))) \
- scm_wrong_type_arg (_subr, _pos, _arg); } while (0)
-#define SCM_ASSERT_TYPE(_cond, _arg, _pos, _subr, _msg) \
- do { if (SCM_UNLIKELY (!(_cond))) \
- scm_wrong_type_arg_msg(_subr, _pos, _arg, _msg); } while (0)
-#endif
-
-/*
- * SCM_WTA_DISPATCH
- */
-
-/* Dirk:FIXME:: In all of the SCM_WTA_DISPATCH_* macros it is assumed that
- * 'gf' is zero if uninitialized. It would be cleaner if some valid SCM value
- * like SCM_BOOL_F or SCM_UNDEFINED was chosen.
- */
-
-SCM_API SCM scm_call_generic_0 (SCM gf);
-
-#define SCM_WTA_DISPATCH_0(gf, subr) \
- return (SCM_UNPACK (gf) \
- ? scm_call_generic_0 ((gf)) \
- : (scm_error_num_args_subr ((subr)), SCM_UNSPECIFIED))
-#define SCM_GASSERT0(cond, gf, subr) \
- if (SCM_UNLIKELY(!(cond))) \
- SCM_WTA_DISPATCH_0((gf), (subr))
-
-SCM_API SCM scm_call_generic_1 (SCM gf, SCM a1);
-
-#define SCM_WTA_DISPATCH_1(gf, a1, pos, subr) \
- return (SCM_UNPACK (gf) \
- ? scm_call_generic_1 ((gf), (a1)) \
- : (scm_wrong_type_arg ((subr), (pos), (a1)), SCM_UNSPECIFIED))
-
-/* This form is for dispatching a subroutine. */
-#define SCM_WTA_DISPATCH_1_SUBR(subr, a1, pos) \
- return (SCM_UNPACK ((*SCM_SUBR_GENERIC (subr))) \
- ? scm_call_generic_1 ((*SCM_SUBR_GENERIC (subr)), (a1)) \
- : (scm_i_wrong_type_arg_symbol (SCM_SUBR_NAME (subr), (pos), (a1)), SCM_UNSPECIFIED))
-
-#define SCM_GASSERT1(cond, gf, a1, pos, subr) \
- if (SCM_UNLIKELY (!(cond))) \
- SCM_WTA_DISPATCH_1((gf), (a1), (pos), (subr))
-
-SCM_API SCM scm_call_generic_2 (SCM gf, SCM a1, SCM a2);
-
-#define SCM_WTA_DISPATCH_2(gf, a1, a2, pos, subr) \
- return (SCM_UNPACK (gf) \
- ? scm_call_generic_2 ((gf), (a1), (a2)) \
- : (scm_wrong_type_arg ((subr), (pos), \
- (pos) == SCM_ARG1 ? (a1) : (a2)), \
- SCM_UNSPECIFIED))
-#define SCM_GASSERT2(cond, gf, a1, a2, pos, subr) \
- if (SCM_UNLIKELY (!(cond))) \
- SCM_WTA_DISPATCH_2((gf), (a1), (a2), (pos), (subr))
-
-SCM_API SCM scm_apply_generic (SCM gf, SCM args);
-
-#define SCM_WTA_DISPATCH_n(gf, args, pos, subr) \
- return (SCM_UNPACK (gf) \
- ? scm_apply_generic ((gf), (args)) \
- : (scm_wrong_type_arg ((subr), (pos), \
- scm_list_ref ((args), \
- scm_from_int ((pos) - 1))), \
- SCM_UNSPECIFIED))
-#define SCM_GASSERTn(cond, gf, args, pos, subr) \
- if (SCM_UNLIKELY (!(cond))) \
- SCM_WTA_DISPATCH_n((gf), (args), (pos), (subr))
-
#ifndef SCM_MAGIC_SNARFER
/* Let these macros pass through if
we are snarfing; thus we can tell the
\f
-/* SCM_EXIT_SUCCESS is the default code to return from SCM if no errors
- * were encountered. SCM_EXIT_FAILURE is the default code to return from
- * SCM if errors were encountered. The return code can be explicitly
- * specified in a SCM program with (scm_quit <n>).
- */
-
-#ifndef SCM_EXIT_SUCCESS
-#ifdef vms
-#define SCM_EXIT_SUCCESS 1
-#else
-#define SCM_EXIT_SUCCESS 0
-#endif /* def vms */
-#endif /* ndef SCM_EXIT_SUCCESS */
-#ifndef SCM_EXIT_FAILURE
-#ifdef vms
-#define SCM_EXIT_FAILURE 2
-#else
-#define SCM_EXIT_FAILURE 1
-#endif /* def vms */
-#endif /* ndef SCM_EXIT_FAILURE */
-
/* Define SCM_C_INLINE_KEYWORD so that it can be used as a replacement
for the "inline" keyword, expanding to nothing when "inline" is not
available.
HCoop / bpt / guile.git / blobdiff