-dnl aclocal.m4 generated automatically by aclocal 1.2d
+dnl aclocal.m4 generated automatically by aclocal 1.4
-dnl Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
-dnl This Makefile.in is free software; the Free Software Foundation
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
[
if test "$ac_cv_header_libc_h" = "no"; then
guile_cv_header_libc_with_unistd="no"
- elif test "$ac_cv_header_unistd.h" = "no"; then
+ elif test "$ac_cv_header_unistd_h" = "no"; then
guile_cv_header_libc_with_unistd="yes"
else
AC_TRY_COMPILE(
fi
])
+dnl QTHREADS_CONFIGURE configures the QuickThreads package. The QT
+dnl sources should be in $srcdir/qt. If configuration succeeds, this
+dnl macro creates the appropriate symlinks in the qt object directory,
+dnl and sets the following variables, used in building libqthreads.a:
+dnl QTHREAD_LTLIBS --- set to libqthreads.la if configuration
+dnl succeeds, or the empty string if configuration fails.
+dnl qtmd_h, qtmds_s, qtmdc_c, qtdmdb_s --- the names of the machine-
+dnl dependent source files.
+dnl qthread_asflags --- flags to pass to the compiler when processing
+dnl assembly-language files.
+dnl
+dnl It also sets the following variables, which describe how clients
+dnl can link against libqthreads.a:
+dnl THREAD_PACKAGE --- set to "QT" if configuration succeeds, or
+dnl the empty string if configuration fails.
+dnl THREAD_CPPFLAGS --- set to `-I' flags for thread header files
+dnl THREAD_LIBS_LOCAL --- linker options for use in this source tree
+dnl THREAD_LIBS_INSTALLED --- linker options for use after this package
+dnl is installed
+dnl It would be nice if all thread configuration packages for Guile
+dnl followed the same conventions.
+dnl
+dnl All of the above variables will be substituted into Makefiles in
+dnl the usual autoconf fashion.
+dnl
+dnl We distinguish between THREAD_LIBS_LOCAL and
+dnl THREAD_LIBS_INSTALLED because the thread library might be in
+dnl this tree, and be built using libtool. This means that:
+dnl 1) when building other executables in this tree, one must
+dnl pass the relative path to the ../libfoo.la file, but
+dnl 2) once the whole package has been installed, users should
+dnl link using -lfoo.
+dnl Normally, we only care about the first case, but since the
+dnl guile-config script needs to give users all the flags they need
+dnl to link programs against guile, the GUILE_WITH_THREADS macro
+dnl needs to supply the second piece of information as well.
+dnl
+dnl This whole thing is a little confused about what ought to be
+dnl done in the top-level configure script, and what ought to be
+dnl taken care of in the subdirectory. For example, qtmds_s and
+dnl friends really ought not to be even mentioned in the top-level
+dnl configure script, but here they are.
+
+AC_DEFUN([QTHREADS_CONFIGURE],[
+ AC_REQUIRE([AC_PROG_LN_S])
+
+ AC_MSG_CHECKING(QuickThreads configuration)
+ # How can we refer to the qt source directory from within the qt build
+ # directory? For headers, we can rely on the fact that the qt src
+ # directory appears in the #include path.
+ qtsrcdir="`(cd $srcdir; pwd)`/qt"
+
+ changequote(,)dnl We use [ and ] in a regexp in the case
+
+ THREAD_PACKAGE=QT
+ qthread_asflags=''
+ case "$host" in
+ i[3456]86-*-*)
+ port_name=i386
+ qtmd_h=md/i386.h
+ qtmds_s=md/i386.s
+ qtmdc_c=md/null.c
+ qtdmdb_s=
+ case "$host" in
+ *-*-netbsd* )
+ ## NetBSD needs to be told to pass the assembly code through
+ ## the C preprocessor. Other GCC installations seem to do
+ ## this by default, but NetBSD's doesn't. We could get the
+ ## same effect by giving the file a name ending with .S
+ ## instead of .s, but I don't see how to tell automake to do
+ ## that.
+ qthread_asflags='-x assembler-with-cpp'
+ ;;
+ esac
+ ;;
+ mips-sgi-irix[56]*)
+ port_name=irix
+ qtmd_h=md/mips.h
+ qtmds_s=md/mips-irix5.s
+ qtmdc_c=md/null.c
+ qtdmdb_s=md/mips_b.s
+ ;;
+ mips-*-*)
+ port_name=mips
+ qtmd_h=md/mips.h
+ qtmds_s=md/mips.s
+ qtmdc_c=md/null.c
+ qtdmdb_s=md/mips_b.s
+ ;;
+ sparc-*-sunos*)
+ port_name=sparc-sunos
+ qtmd_h=md/sparc.h
+ qtmds_s=md/_sparc.s
+ qtmdc_c=md/null.c
+ qtdmdb_s=md/_sparc_b.s
+ ;;
+ sparc-*-*)
+ port_name=sparc
+ qtmd_h=md/sparc.h
+ qtmds_s=md/sparc.s
+ qtmdc_c=md/null.c
+ qtdmdb_s=md/sparc_b.s
+ ;;
+ alpha*-*-*)
+ port_name=alpha
+ qtmd_h=md/axp.h
+ qtmds_s=md/axp.s
+ qtmdc_c=md/null.c
+ qtdmdb_s=md/axp_b.s
+ ;;
+ *)
+ echo "Unknown configuration; threads package disabled"
+ THREAD_PACKAGE=""
+ ;;
+ esac
+ changequote([, ])
+
+ # Did configuration succeed?
+ if test -n "$THREAD_PACKAGE"; then
+ AC_MSG_RESULT($port_name)
+ QTHREAD_LTLIBS=libqthreads.la
+ THREAD_CPPFLAGS="-I$qtsrcdir -I../qt"
+ THREAD_LIBS_LOCAL="../qt/libqthreads.la"
+ THREAD_LIBS_INSTALLED="-lqthreads"
+ else
+ AC_MSG_RESULT(none; disabled)
+ fi
+
+ AC_SUBST(QTHREAD_LTLIBS)
+ AC_SUBST(qtmd_h)
+ AC_SUBST(qtmds_s)
+ AC_SUBST(qtmdc_c)
+ AC_SUBST(qtdmdb_s)
+ AC_SUBST(qthread_asflags)
+ AC_SUBST(THREAD_PACKAGE)
+ AC_SUBST(THREAD_CPPFLAGS)
+ AC_SUBST(THREAD_LIBS_LOCAL)
+ AC_SUBST(THREAD_LIBS_INSTALLED)
+])
+
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AM_PROG_INSTALL])
+[AC_REQUIRE([AC_PROG_INSTALL])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
AC_REQUIRE([AM_SANITY_CHECK])
AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-# serial 1
-
-AC_DEFUN(AM_PROG_INSTALL,
-[AC_REQUIRE([AC_PROG_INSTALL])
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-AC_SUBST(INSTALL_SCRIPT)dnl
-])
-
#
# Check to make sure that the build environment is sane.
#
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
- if test $USE_MAINTAINER_MODE = yes; then
- MAINT=
- else
- MAINT='#M#'
- fi
+ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+ MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
]
)
+# Define a conditional.
+
+AC_DEFUN(AM_CONDITIONAL,
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi])
+
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
changequote([,]))])
-# serial 15 AM_PROG_LIBTOOL
-AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_RANLIB])
-AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AM_PROG_LD])
-AC_REQUIRE([AM_PROG_NM])
-AC_REQUIRE([AC_PROG_LN_S])
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)
+AC_SUBST(LIBTOOL)dnl
-dnl Allow the --disable-shared flag to stop us from building shared libs.
-AC_ARG_ENABLE(shared,
-[ --enable-shared build shared libraries [default=yes]],
-[if test "$enableval" = no; then
- enable_shared=no
-else
- enable_shared=yes
-fi])
-libtool_shared=
-test "$enable_shared" = no && libtool_shared=" --disable-shared"
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
-dnl Allow the --disable-static flag to stop us from building static libs.
-AC_ARG_ENABLE(static,
-[ --enable-static build static libraries [default=yes]],
-[if test "$enableval" = no; then
- enable_static=no
-else
- enable_static=yes
-fi])
-libtool_static=
-test "$enable_static" = no && libtool_static=" --disable-static"
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
-libtool_flags="$libtool_shared$libtool_static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-[case "$host" in
+case "$host" in
*-*-irix6*)
- ac_save_CFLAGS="$CFLAGS"
- # -n32 always needs to be added to the linker when using GCC.
- test "$ac_cv_prog_gcc" = yes && CFLAGS="$CFLAGS -n32"
- for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
- if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
- LD="${LD-ld} $f"
- fi
- done
- CFLAGS="$ac_save_CFLAGS"
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
;;
-esac]
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
- # Accept absolute paths.
- /*)
- test -z "$LD" && LD="$ac_prog"
- ;;
+ # Accept absolute paths.
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
- test "$with_gnu_ld" != yes && break
+ test "$with_gnu_ld" != yes && break
fi
fi
done
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_SUBST(LD)
-AM_PROG_LD_GNU
+AC_PROG_LD_GNU
])
-AC_DEFUN(AM_PROG_LD_GNU,
+AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
fi])
])
-# AM_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AM_PROG_NM,
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
-[case "$NM" in
-/*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
-*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb $PATH /bin; do
- test -z "$ac_dir" && dir=.
- if test -f $ac_dir/nm; then
+[if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
- if ($ac_dir/nm -B /dev/null 2>&1; exit 0) | grep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- elif ($ac_dir/nm -p /dev/null 2>&1; exit 0) | grep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
else
- ac_cv_path_NM="$ac_dir/nm"
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
fi
- break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
- ;;
-esac])
+fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])
-dnl
-dnl CY_AC_WITH_THREADS determines which thread library the user intends
-dnl to put underneath guile. Pass it the path to find the guile top-level
-dnl source directory. Eg CY_AC_WITH_THREADS(../..) for tcl/unix.
-dnl
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$host" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
+ ;;
+esac
+])
-AC_DEFUN([CY_AC_WITH_THREADS],[
-AC_CACHE_CHECK("threads package type",cy_cv_threads_package,[
-AC_CACHE_VAL(cy_cv_threads_cflags,[
-AC_CACHE_VAL(cy_cv_threads_libs,[
-use_threads=no;
-AC_ARG_WITH(threads,[ --with-threads thread interface],
- use_threads=$withval, use_threads=no)
-test -n "$use_threads" || use_threads=qt
-threads_package=unknown
-if test "$use_threads" != no; then
-dnl
-dnl Test for the qt threads package - used for cooperative threads
-dnl This may not necessarily be built yet - so just check for the
-dnl header files.
-dnl
- if test "$use_threads" = yes || test "$use_threads" = qt; then
- # Look for qt in source directory.
- if test -f $srcdir/qt/qt.c; then
- qtsrcdir="`(cd $srcdir; pwd)`/qt"
- threads_package=COOP
- cy_cv_threads_cflags="-I$qtsrcdir -I../qt"
- cy_cv_threads_libs="../qt/libqthreads.a"
- fi
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
+ ])
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
- if test -f $use_threads/qt.c; then
- # FIXME seems as though we should try to use an installed qt here.
- threads_package=COOP
- cy_cv_threads_cflags="-I$use_threads -I../qt"
- cy_cv_threads_libs="../qt/libqthreads.a"
- fi
- fi
- if test "$use_threads" = pthreads; then
- # Look for pthreads in srcdir. See above to understand why
- # we always set threads_package.
- if test -f $srcdir/../../pthreads/pthreads/queue.c \
- || test -f $srcdir/../pthreads/pthreads/queue.c; then
- threads_package=MIT
- cy_cv_threads_cflags="-I$srcdir/../../pthreads/include"
- cy_cv_threads_libs="-L../../pthreads/lib -lpthread"
- fi
- fi
- saved_CPP="$CPPFLAGS"
- saved_LD="$LDFLAGS"
- saved_LIBS="$LIBS"
- if test "$threads_package" = unknown; then
-dnl
-dnl Test for the FSU threads package
-dnl
- CPPFLAGS="-I$use_threads/include"
- LDFLAGS="-L$use_threads/lib"
- LIBS="-lgthreads -lmalloc"
- AC_TRY_LINK([#include <pthread.h>],[
-pthread_equal(NULL,NULL);
-], threads_package=FSU)
- fi
- if test "$threads_package" = unknown; then
-dnl
-dnl Test for the MIT threads package
-dnl
- LIBS="-lpthread"
- AC_TRY_LINK([#include <pthread.h>],[
-pthread_equal(NULL,NULL);
-], threads_package=MIT)
- fi
- if test "$threads_package" = unknown; then
-dnl
-dnl Test for the PCthreads package
-dnl
- LIBS="-lpthreads"
- AC_TRY_LINK([#include <pthread.h>],[
-pthread_equal(NULL,NULL);
-], threads_package=PCthreads)
- fi
-dnl
-dnl Set the appropriate flags!
-dnl
- cy_cv_threads_cflags="$CPPFLAGS $cy_cv_threads_cflags"
- cy_cv_threads_libs="$LDFLAGS $LIBS $cy_cv_threads_libs"
- cy_cv_threads_package=$threads_package
- CPPFLAGS="$saved_CPP"
- LDFLAGS="$saved_LD"
- LIBS="$saved_LIBS"
- if test "$threads_package" = unknown; then
- AC_MSG_ERROR("cannot find thread library installation")
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+ INCLTDL=
fi
-fi
-])
])
+
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
+
+
+# serial 1
+
+# @defmac AC_PROG_CC_STDC
+# @maindex PROG_CC_STDC
+# @ovindex CC
+# If the C compiler in not in ANSI C mode by default, try to add an option
+# to output variable @code{CC} to make it so. This macro tries various
+# options that select ANSI C on some system or another. It considers the
+# compiler to be in ANSI C mode if it handles function prototypes correctly.
+#
+# If you use this macro, you should check after calling it whether the C
+# compiler has been set to accept ANSI C; if not, the shell variable
+# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
+# code in ANSI C, you can make an un-ANSIfied copy of it by using the
+# program @code{ansi2knr}, which comes with Ghostscript.
+# @end defmac
+
+AC_DEFUN(AM_PROG_CC_STDC,
+[AC_REQUIRE([AC_PROG_CC])
+AC_BEFORE([$0], [AC_C_INLINE])
+AC_BEFORE([$0], [AC_C_CONST])
+dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
+dnl a magic option to avoid problems with ANSI preprocessor commands
+dnl like #elif.
+dnl FIXME: can't do this because then AC_AIX won't work due to a
+dnl circular dependency.
+dnl AC_BEFORE([$0], [AC_PROG_CPP])
+AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
+AC_CACHE_VAL(am_cv_prog_cc_stdc,
+[am_cv_prog_cc_stdc=no
+ac_save_CC="$CC"
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ AC_TRY_COMPILE(
+[#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+], [
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
],
-dnl
-dnl Set flags according to what is cached.
-dnl
-CPPFLAGS="$cy_cv_threads_cflags"
-LIBS="$cy_cv_threads_libs"
-)
+[am_cv_prog_cc_stdc="$ac_arg"; break])
+done
+CC="$ac_save_CC"
+])
+if test -z "$am_cv_prog_cc_stdc"; then
+ AC_MSG_RESULT([none needed])
+else
+ AC_MSG_RESULT($am_cv_prog_cc_stdc)
+fi
+case "x$am_cv_prog_cc_stdc" in
+ x|xno) ;;
+ *) CC="$CC $am_cv_prog_cc_stdc" ;;
+esac
])