#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.10
+# Generated automatically using autoconf version 2.12
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.10"
+ echo "configure generated by autoconf version 2.12"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
-
. $srcdir/GUILE-VERSION
-
-all_subdirs=`cat $srcdir/*/PLUGIN/REQ $srcdir/*/PLUGIN/OPT /dev/null | tsort | xargs echo`
-req_subdirs=`cat $srcdir/*/PLUGIN/REQ /dev/null | tsort | xargs echo`
-opt_subdirs=`cat $srcdir/*/PLUGIN/OPT /dev/null | tsort | xargs echo`
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:553: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ for ac_prog in ginstall installbsd scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ # OSF/1 installbsd also uses dspmsg, but is usable.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+
+PACKAGE=$PACKAGE
+
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+VERSION=$VERSION
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:619: checking whether build environment is sane" >&5
+echo timestamp > conftestfile
+# Do this in a subshell so we don't clobber the current shell's
+# arguments. FIXME: maybe try `-L' hack like GETLOADAVG test?
+if (set X `ls -t $srcdir/configure conftestfile`; test "$2" = conftestfile)
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:653: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+all_subdirs=`cat $srcdir/*/PLUGIN/REQ $srcdir/*/PLUGIN/OPT /dev/null | tsort | xargs echo`
+req_subdirs=`cat $srcdir/*/PLUGIN/REQ /dev/null | tsort | xargs echo`
+opt_subdirs=`cat $srcdir/*/PLUGIN/OPT /dev/null | tsort | xargs echo`
+
subdirs="$all_subdirs"
-existingdirs=
for d in $all_subdirs; do
if test -d $srcdir/$d ; then
existingdirs="$existingdirs $d"
- if test "x$verbose" = xyes; then
- if test -f $srcdir/$d/PLUGIN/greet ; then
- cat $srcdir/$d/PLUGIN/greet
- else
- echo ===
- echo === Configuring plug-in component $d
- echo ===
- fi
- fi
+ test -n "$silent" || echo Configuring plug-in component $d
fi
done
for d in $req_subdirs; do
- if test ! -d $srcdir/$d ; then
- echo "*******"
- echo "*******"
- echo "**\+/**"
- echo "**=*=**" ERROR: Missing required package: $d
- echo "**/+\**"
- echo "*******"
- echo "*******"
- exit 1
- fi
+ test -d $srcdir/$d || {
+ echo ERROR: Missing required package: $d 1>&2
+ exit 1
+ }
done
-if test "x$verbose" = xyes; then
- for d in $opt_subdirs; do
- if test ! -d $srcdir/$d ; then
- echo "*****"
- echo "*===*"
- echo "*=*=*" WARNING: Missing suggested package: $d
- echo "*===*"
- echo "*****"
- fi
- done
-fi
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# --recheck option to rerun configure.
#
EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
- >> confcache
+ case `(ac_space=' '; set) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.10"
+ echo "$CONFIG_STATUS generated by autoconf version 2.12"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
done
ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile doc/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile doc/Makefile doc/guile-programmer/Makefile doc/guile-user/Makefile newdoc/Makefile newdoc/ref/Makefile newdoc/tutorial/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@SET_MAKE@%$SET_MAKE%g
s%@subdirs@%$subdirs%g
s%@existingdirs@%$existingdirs%g
-s%@GUILE_VERSION@%$GUILE_VERSION%g
CEOF
EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile doc/guile-programmer/Makefile doc/guile-user/Makefile newdoc/Makefile newdoc/ref/Makefile newdoc/tutorial/Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile]", defaulting infile="outfile.in".
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust relative srcdir, etc. for subdirectories.
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
-" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
-rm -f conftest.subs
+rm -f conftest.s*
+EOF
+cat >> $CONFIG_STATUS <<EOF
+EOF
+cat >> $CONFIG_STATUS <<\EOF
exit 0
EOF
ac_popdir=`pwd`
cd $ac_config_dir
+ # A "../" for each directory in /$ac_config_dir.
+ ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
+
case "$srcdir" in
.) # No --srcdir option. We are building in place.
ac_sub_srcdir=$srcdir ;;
/*) # Absolute path.
ac_sub_srcdir=$srcdir/$ac_config_dir ;;
*) # Relative path.
- ac_sub_srcdir=../$srcdir/$ac_config_dir ;;
+ ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
esac
# Check for guested configure; otherwise get Cygnus style configure.
if test -n "$ac_sub_configure"; then
# Make the cache file name correct relative to the subdirectory.
- # A "../" for each directory in /$ac_config_dir.
- ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
case "$cache_file" in
/*) ac_sub_cache_file=$cache_file ;;
*) # Relative path.
ac_sub_cache_file="$ac_dots$cache_file" ;;
esac
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
# The eval makes quoting arguments work.