* Changes to Scheme functions and syntax
+** New function 'unsetenv'.
+
+** There is support for Infinity and NaNs.
+
+Following PLT Scheme, Guile can now work with infinite numbers, and
+'not-a-numbers'.
+
+There is new syntax for numbers: "+inf.0" (infinity), "-inf.0"
+(negative infinity), "+nan.0" (not-a-number), and "-nan.0" (same as
+"+nan.0"). These numbers are inexact and have no exact counterpart.
+
+Dividing by an inexact zero returns +inf.0 or -inf.0, depending on the
+sign of the dividend. The infinities are integers, and they answer #t
+for both 'even?' and 'odd?'. The +nan.0 value is not an integer and is
+not '=' to itself, but '+nan.0' is 'eqv?' to itself.
+
+For example
+
+ (/ 1 0.0)
+ => +inf.0
+
+ (/ 0 0.0)
+ => +nan.0
+
+ (/ 0)
+ ERROR: Numerical overflow
+
+Two new predicates 'inf?' and 'nan?' can be used to test for the
+special values.
+
+** Inexact zero can have a sign.
+
+Guile can now distinguish between plus and minus inexact zero, if your
+platform supports this, too. The two zeros are equal according to
+'=', but not according to 'eqv?'. For example
+
+ (- 0.0)
+ => -0.0
+
+ (= 0.0 (- 0.0))
+ => #t
+
+ (eqv? 0.0 (- 0.0))
+ => #f
+
** We now have uninterned symbols.
The new function 'make-symbol' will return a uninterned symbol. This
Use `substring-move!' instead.
+** Deprecated: procedure->macro
+
+Change your code to use either procedure->memoizing-macro or, probably better,
+to use r5rs macros. Also, be aware that macro expansion will not be done
+during evaluation, but prior to evaluation.
+
* Changes to the C interface
+** The SCM_VELTS macros now returns a read-only vector. For writing,
+use the new macros SCM_WRITABLE_VELTS, SCM_SET_VECTOR_LENGTH. The use
+of SCM_WRITABLE_VELTS is discouraged, though.
+
+** Garbage collector rewrite.
+
+The garbage collector is cleaned up a lot, and now uses lazy
+sweeping. This is reflected in the output of (gc-stats); since cells
+are being freed when they are allocated, the cells-allocated field
+stays roughly constant.
+
+For malloc related triggers, the behavior is changed. It uses the same
+heuristic as the cell-triggered collections. It may be tuned with the
+environment variables GUILE_MIN_YIELD_MALLOC. This is the percentage
+for minimum yield of malloc related triggers. The default is 40.
+GUILE_INIT_MALLOC_LIMIT sets the initial trigger for doing a GC. The
+default is 200 kb.
+
+Debugging operations for the freelist have been deprecated, along with
+the C variables that control garbage collection. The environment
+variables GUILE_MAX_SEGMENT_SIZE, GUILE_INIT_SEGMENT_SIZE_2,
+GUILE_INIT_SEGMENT_SIZE_1, and GUILE_MIN_YIELD_2 should be used.
+
** The struct scm_cell has been renamed to scm_t_cell
This is in accordance to Guile's naming scheme for types. Note that
The new functions are more symmetrical and do not need cooperation
from smob free routines, among other improvements.
-The new functions are scm_malloc, scm_realloc, scm_strdup,
-scm_strndup, scm_gc_malloc, scm_gc_realloc, scm_gc_free,
-scm_gc_register_collectable_memory, and
+The new functions are scm_malloc, scm_realloc, scm_calloc, scm_strdup,
+scm_strndup, scm_gc_malloc, scm_gc_calloc, scm_gc_realloc,
+scm_gc_free, scm_gc_register_collectable_memory, and
scm_gc_unregister_collectable_memory. Refer to the manual for more
details and for upgrading instructions.
the GC could sometimes observe half initialized cells. Only careful coding by
the user of SCM_NEWCELL and SCM_NEWCELL2 could make this safe and efficient.
+** CHECK_ENTRY, CHECK_APPLY and CHECK_EXIT have been deprecated.
+
+Use the variables scm_check_entry_p, scm_check_apply_p and scm_check_exit_p
+instead.
+
+** SRCBRKP has been deprecated.
+
+Use scm_c_source_property_breakpoint_p instead.
+
+** Deprecated: scm_makmacro
+
+Change your code to use either scm_makmmacro or, probably better, to use r5rs
+macros. Also, be aware that macro expansion will not be done during
+evaluation, but prior to evaluation.
+
+** Removed from scm_root_state: def_inp, def_outp, def_errp, together
+with corresponding macros scm_def_inp, scm_def_outp and scm_def_errp.
+These were undocumented and unused copies of the standard ports at the
+time that Guile was initialised. Normally the current ports should be
+used instead, obtained from scm_current_input_port () etc. If an
+application needs to retain earlier ports, it should save them in a
+gc-protected location.
+
+** Removed compile time option MEMOIZE_LOCALS
+
+Now, caching of local variable positions during memoization is mandatory.
+However, the option to disable the caching has most probably not been used
+anyway.
+
+** Removed compile time option SCM_RECKLESS
+
+Full number of arguments checking of closures is mandatory now. However, the
+option to disable the checking has most probably not been used anyway.
+
+** Removed compile time option SCM_CAUTIOUS
+
+Full number of arguments checking of closures is mandatory now. However, the
+option to disable the checking has most probably not been used anyway.
+
+** Removed definitions: scm_lisp_nil, scm_lisp_t, s_nil_ify, scm_m_nil_ify,
+s_t_ify, scm_m_t_ify, s_0_cond, scm_m_0_cond, s_0_ify, scm_m_0_ify, s_1_ify,
+scm_m_1_ify, scm_debug_newcell, scm_debug_newcell2, scm_tc16_allocated,
+SCM_SET_SYMBOL_HASH, SCM_IM_NIL_IFY, SCM_IM_T_IFY, SCM_IM_0_COND,
+SCM_IM_0_IFY, SCM_IM_1_IFY, SCM_GC_SET_ALLOCATED, scm_debug_newcell,
+scm_debug_newcell2, scm_substring_move_left_x, scm_substring_move_right_x,
+long_long, ulong_long, scm_sizet, SCM_WNA, SCM_OUTOFRANGE, SCM_NALLOC,
+SCM_HUP_SIGNAL, SCM_INT_SIGNAL, SCM_FPE_SIGNAL, SCM_BUS_SIGNAL,
+SCM_SEGV_SIGNAL, SCM_ALRM_SIGNAL, SCM_GC_SIGNAL, SCM_TICK_SIGNAL,
+SCM_SIG_ORD, SCM_ORD_SIG, SCM_NUM_SIGS, moddata, registered_mods,
+scm_register_module_xxx, scm_registered_modules,
+scm_clear_registered_modules, scm_wta, *top-level-lookup-closure*,
+scm_top_level_lookup_closure_var, scm_system_transformer, scm_eval_3,
+scm_eval2, SCM_SETAND_CAR, SCM_SETOR_CAR, SCM_SETAND_CDR, SCM_SETOR_CDR,
+SCM_FREEP, SCM_NFREEP, SCM_GC8MARKP, SCM_SETGC8MARK, SCM_CLRGC8MARK,
+SCM_GCTYP16, SCM_GCCDR, scm_remember, scm_protect_object,
+scm_unprotect_object, root_module_lookup_closure, scm_sym_app,
+scm_sym_modules, module_prefix, make_modules_in_var,
+beautify_user_module_x_var, try_module_autoload_var, scm_module_full_name,
+scm_the_root_module, scm_make_module, scm_ensure_user_module,
+scm_load_scheme_module, scm_port, scm_ptob_descriptor, scm_port_rw_active,
+scm_close_all_ports_except, scm_rstate, scm_rng, scm_i_rstate,
+SCM_SLOPPY_STRINGP, SCM_RWSTRINGP, SCM_STRING_UCHARS, SCM_STRING_CHARS,
+scm_read_only_string_p, scm_makstr, scm_makfromstr,
+scm_make_shared_substring, scm_tc7_substring, SCM_SLOPPY_CONSP,
+SCM_SLOPPY_NCONSP, scm_tc7_ssymbol, scm_tc7_msymbol, scm_tcs_symbols,
+sym_huh, scm_variable_set_name_hint, scm_builtin_variable, SCM_VARVCELL,
+SCM_UDVARIABLEP, SCM_DEFVARIABLEP, scm_internal_with_fluids,
+scm_make_gsubr, scm_make_gsubr_with_generic, scm_create_hook, list*,
+SCM_LIST0, SCM_LIST1, SCM_LIST2, SCM_LIST3, SCM_LIST4, SCM_LIST5,
+SCM_LIST6, SCM_LIST7, SCM_LIST8, SCM_LIST9, scm_listify, scm_sloppy_memq,
+scm_sloppy_memv, scm_sloppy_member, scm_end_of_file_key,
+scm_read_and_eval_x, scm_mkbig, scm_big2inum, scm_adjbig, scm_normbig,
+scm_copybig, scm_2ulong2big, scm_dbl2big, scm_big2dbl, SCM_FIXNUM_BIT,
+scm_subr_entry, SCM_SUBR_DOC, scm_make_subr_opt, scm_make_subr,
+scm_make_subr_with_generic, setjmp_type, setjmp_type,
+scm_call_catching_errors, scm_make_smob_type_mfpe, scm_set_smob_mfpe,
+scm_strprint_obj, scm_read_0str, scm_eval_0str, SCM_CHARS, SCM_UCHARS,
+SCM_SETCHARS, SCM_SLOPPY_SUBSTRP, SCM_SUBSTR_STR, SCM_SUBSTR_OFFSET,
+SCM_LENGTH_MAX, SCM_LENGTH, SCM_SETLENGTH, SCM_ROSTRINGP, SCM_ROLENGTH,
+SCM_ROCHARS, SCM_ROUCHARS, SCM_SUBSTRP, SCM_COERCE_SUBSTR, scm_strhash,
+scm_sym2vcell, scm_sym2ovcell_soft, scm_sym2ovcell,
+scm_intern_obarray_soft, scm_intern_obarray, scm_intern, scm_intern0,
+scm_sysintern, scm_sysintern0, scm_sysintern0_no_module_lookup,
+scm_symbol_value0, scm_string_to_obarray_symbol, scm_intern_symbol,
+scm_unintern_symbol, scm_symbol_binding, scm_symbol_interned_p,
+scm_symbol_bound_p, scm_symbol_set_x, scm_gentemp,
+scm_init_symbols_deprecated, s_vector_set_length_x, scm_vector_set_length_x,
+scm_contregs, scm_debug_info, scm_debug_frame, SCM_DSIDEVAL, SCM_OPDIRP,
+scm_fport, scm_option, SCM_CONST_LONG, SCM_VCELL, SCM_GLOBAL_VCELL,
+SCM_VCELL_INIT, SCM_GLOBAL_VCELL_INIT, scm_srcprops, scm_srcprops_chunk,
+scm_info_frame, scm_stack, scm_array, scm_array_dim, SCM_ARRAY_CONTIGUOUS,
+SCM_HUGE_LENGTH, SCM_FUNC_NAME, SCM_WTA, RETURN_SCM_WTA,
+SCM_VALIDATE_NUMBER_COPY, SCM_VALIDATE_NUMBER_DEF_COPY,
+SCM_VALIDATE_STRINGORSUBSTR, SCM_VALIDATE_ROSTRING,
+SCM_VALIDATE_ROSTRING_COPY, SCM_VALIDATE_NULLORROSTRING_COPY,
+SCM_VALIDATE_RWSTRING, SCM_VALIDATE_OPDIR, DIGITS, scm_small_istr2int,
+scm_istr2int, scm_istr2flo, scm_istring2number, scm_istr2int,
+scm_istr2flo, scm_istring2number, scm_vtable_index_vcell, scm_si_vcell,
+SCM_ECONSP, SCM_NECONSP, SCM_GLOC_VAR, SCM_GLOC_VAL, SCM_GLOC_SET_VAL,
+SCM_GLOC_VAL_LOC, scm_make_gloc, scm_gloc_p, scm_tc16_variable
+
Changes since Guile 1.4:
* Changes to the distribution
HCoop / bpt / guile.git / blobdiff