Please send Guile bug reports to bug-guile@prep.ai.mit.edu.
\f
-Changes in Guile 1.1 (Sun 5 Jan 1997):
+Changes since Guile 1.2:
+
+* Changes to the distribution
+
+* Changes to the stand-alone interpreter
+
+* Changes to the procedure for linking libguile with your programs
+
+* Changes to Scheme functions and syntax
+
+** There is now some basic support for fluids. Please read
+"libguile/fluid.h" to find out more. It is accessible from Scheme with
+the following builtin procedures:
+
+ (make-fluid)
+
+ Create a new fluid object.
+
+ (fluid-ref FLUID)
+ (fluid-set! FLUID VAL)
+
+ Access/modify the fluid FLUID. Modifications are only visible
+ within the current dynamic root (that includes threads).
+
+There is no `fluid-let' yet.
+
+* Changes to system call interfaces:
+
+** close-port, close-input-port and close-output-port now return a
+boolean instead of an `unspecified' object. #t means that the port
+was successfully closed, while #f means it was already closed. It is
+also now possible for these procedures to raise an exception if an
+error occurs (some errors from write can be delayed until close.)
+
+** The following new procedures have been added (most use scsh
+interfaces):
+
+** close PORT/FD
+Similar to close-port, but also works on file descriptors. A side
+effect of closing a file descriptor is that any ports using that file
+descriptor are moved to a different file descriptor and have
+their revealed counts set to zero.
+
+The next five procedures perform a dup2 system call, if NEWFD (an
+integer) is supplied, otherwise a dup. The file descriptor to be
+duplicated can be supplied as an integer or wrapped in a port. The
+type of value returned varies depending on which procedure is used.
+
+All procedures also have the side effect when performing dup2 that any
+ports using NEWFD are moved to a different file descriptor and have
+their revealed counts set to zero.
+
+** dup->fdes PORT/FD [NEWFD]
+Returns an integer file descriptor.
+
+** dup->inport PORT/FD [NEWFD]
+Returns a new input port using the new file descriptor.
+
+** dup->outport PORT/FD [NEWFD]
+Returns a new output port using the new file descriptor.
+
+** dup PORT/FD [NEWFD]
+Returns a new port if PORT/FD is a port, with the same mode as the
+supplied port, otherwise returns an integer file descriptor.
+
+** dup->port PORT/FD MODE [NEWFD]
+Returns a new port using the new file descriptor. MODE supplies a
+mode string for the port (as for `open-file').
+
+** primitive-dup PORT/FD
+Performs a dup system call on the file descriptor FD, or the file
+descriptor underlying PORT and returns a new integer file descriptor.
+
+** primitive-dup2 PORT/FD NEWFD
+
+Performs a dup2 system call on the file descriptor FD, or the file
+descriptor underlying PORT, using NEWFD (an integer) as the target
+file descriptor. Any ports using NEWFD are moved to a different file
+descriptor and have their revealed counts set to zero. The value
+returned is NEWFD.
+
+** port->fdes PORT
+Returns the integer file descriptor underlying PORT. As a
+side effect the revealed count of PORT is incremented.
+
+** fdes->inport FDES
+Returns an existing input port which has FDES as its underlying file
+descriptor, if one exists, and increments its revealed count.
+Otherwise, returns a new input port with a revealed count of 1.
+
+** fdes->outport FDES
+Returns an existing output port which has FDES as its underlying file
+descriptor, if one exists, and increments its revealed count.
+Otherwise, returns a new output port with a revealed count of 1.
+
+** setenv [NAME] [VALUE]
+If VALUE is `#f', removes NAME from the environment. Otherwise
+adds the string NAME=VALUE to the environment, replacing any previous
+value for NAME.
+
+** primitive-exit [STATUS]
+Terminates the current process without unwinding the Scheme stack.
+This would usually be used after a fork.
+
+* Changes to the gh_ interface
+
+* Changes to the scm_ interface
+
+\f
+Changes in Guile 1.2 (released Tuesday, June 24 1997):
+
+* Changes to the distribution
+
+** Nightly snapshots are now available from ftp.red-bean.com.
+The old server, ftp.cyclic.com, has been relinquished to its rightful
+owner.
+
+Nightly snapshots of the Guile development sources are now available via
+anonymous FTP from ftp.red-bean.com, as /pub/guile/guile-snap.tar.gz.
+
+Via the web, that's: ftp://ftp.red-bean.com/pub/guile/guile-snap.tar.gz
+For getit, that's: ftp.red-bean.com:/pub/guile/guile-snap.tar.gz
+
+** To run Guile without installing it, the procedure has changed a bit.
+
+If you used a separate build directory to compile Guile, you'll need
+to include the build directory in SCHEME_LOAD_PATH, as well as the
+source directory. See the `INSTALL' file for examples.
+
+* Changes to the procedure for linking libguile with your programs
+
+** The standard Guile load path for Scheme code now includes
+$(datadir)/guile (usually /usr/local/share/guile). This means that
+you can install your own Scheme files there, and Guile will find them.
+(Previous versions of Guile only checked a directory whose name
+contained the Guile version number, so you had to re-install or move
+your Scheme sources each time you installed a fresh version of Guile.)
+
+The load path also includes $(datadir)/guile/site; we recommend
+putting individual Scheme files there. If you want to install a
+package with multiple source files, create a directory for them under
+$(datadir)/guile.
+
+** Guile 1.2 will now use the Rx regular expression library, if it is
+installed on your system. When you are linking libguile into your own
+programs, this means you will have to link against -lguile, -lqt (if
+you configured Guile with thread support), and -lrx.
+
+If you are using autoconf to generate configuration scripts for your
+application, the following lines should suffice to add the appropriate
+libraries to your link command:
+
+### Find Rx, quickthreads and libguile.
+AC_CHECK_LIB(rx, main)
+AC_CHECK_LIB(qt, main)
+AC_CHECK_LIB(guile, scm_shell)
+
+The Guile 1.2 distribution does not contain sources for the Rx
+library, as Guile 1.0 did. If you want to use Rx, you'll need to
+retrieve it from a GNU FTP site and install it separately.
+
+* Changes to Scheme functions and syntax
+
+** The dynamic linking features of Guile are now enabled by default.
+You can disable them by giving the `--disable-dynamic-linking' option
+to configure.
+
+ (dynamic-link FILENAME)
+
+ Find the object file denoted by FILENAME (a string) and link it
+ into the running Guile application. When everything works out,
+ return a Scheme object suitable for representing the linked object
+ file. Otherwise an error is thrown. How object files are
+ searched is system dependent.
+
+ (dynamic-object? VAL)
+
+ Determine whether VAL represents a dynamically linked object file.
+
+ (dynamic-unlink DYNOBJ)
+
+ Unlink the indicated object file from the application. DYNOBJ
+ should be one of the values returned by `dynamic-link'.
+
+ (dynamic-func FUNCTION DYNOBJ)
+
+ Search the C function indicated by FUNCTION (a string or symbol)
+ in DYNOBJ and return some Scheme object that can later be used
+ with `dynamic-call' to actually call this function. Right now,
+ these Scheme objects are formed by casting the address of the
+ function to `long' and converting this number to its Scheme
+ representation.
+
+ (dynamic-call FUNCTION DYNOBJ)
+
+ Call the C function indicated by FUNCTION and DYNOBJ. The
+ function is passed no arguments and its return value is ignored.
+ When FUNCTION is something returned by `dynamic-func', call that
+ function and ignore DYNOBJ. When FUNCTION is a string (or symbol,
+ etc.), look it up in DYNOBJ; this is equivalent to
+
+ (dynamic-call (dynamic-func FUNCTION DYNOBJ) #f)
+
+ Interrupts are deferred while the C function is executing (with
+ SCM_DEFER_INTS/SCM_ALLOW_INTS).
+
+ (dynamic-args-call FUNCTION DYNOBJ ARGS)
+
+ Call the C function indicated by FUNCTION and DYNOBJ, but pass it
+ some arguments and return its return value. The C function is
+ expected to take two arguments and return an `int', just like
+ `main':
+
+ int c_func (int argc, char **argv);
+
+ ARGS must be a list of strings and is converted into an array of
+ `char *'. The array is passed in ARGV and its size in ARGC. The
+ return value is converted to a Scheme number and returned from the
+ call to `dynamic-args-call'.
+
+When dynamic linking is disabled or not supported on your system,
+the above functions throw errors, but they are still available.
+
+Here is a small example that works on GNU/Linux:
+
+ (define libc-obj (dynamic-link "libc.so"))
+ (dynamic-args-call 'rand libc-obj '())
+
+See the file `libguile/DYNAMIC-LINKING' for additional comments.
+
+** The #/ syntax for module names is depreciated, and will be removed
+in a future version of Guile. Instead of
+
+ #/foo/bar/baz
+
+instead write
+
+ (foo bar baz)
+
+The latter syntax is more consistent with existing Lisp practice.
+
+** Guile now does fancier printing of structures. Structures are the
+underlying implementation for records, which in turn are used to
+implement modules, so all of these object now print differently and in
+a more informative way.
+
+The Scheme printer will examine the builtin variable *struct-printer*
+whenever it needs to print a structure object. When this variable is
+not `#f' it is deemed to be a procedure and will be applied to the
+structure object and the output port. When *struct-printer* is `#f'
+or the procedure return `#f' the structure object will be printed in
+the boring #<struct 80458270> form.
+
+This hook is used by some routines in ice-9/boot-9.scm to implement
+type specific printing routines. Please read the comments there about
+"printing structs".
+
+One of the more specific uses of structs are records. The printing
+procedure that could be passed to MAKE-RECORD-TYPE is now actually
+called. It should behave like a *struct-printer* procedure (described
+above).
+
+** Guile now supports a new R4RS-compliant syntax for keywords. A
+token of the form #:NAME, where NAME has the same syntax as a Scheme
+symbol, is the external representation of the keyword named NAME.
+Keyword objects print using this syntax as well, so values containing
+keyword objects can be read back into Guile. When used in an
+expression, keywords are self-quoting objects.
+
+Guile suports this read syntax, and uses this print syntax, regardless
+of the current setting of the `keyword' read option. The `keyword'
+read option only controls whether Guile recognizes the `:NAME' syntax,
+which is incompatible with R4RS. (R4RS says such token represent
+symbols.)
+
+** Guile has regular expression support again. Guile 1.0 included
+functions for matching regular expressions, based on the Rx library.
+In Guile 1.1, the Guile/Rx interface was removed to simplify the
+distribution, and thus Guile had no regular expression support. Guile
+1.2 again supports the most commonly used functions, and supports all
+of SCSH's regular expression functions.
+
+If your system does not include a POSIX regular expression library,
+and you have not linked Guile with a third-party regexp library such as
+Rx, these functions will not be available. You can tell whether your
+Guile installation includes regular expression support by checking
+whether the `*features*' list includes the `regex' symbol.
+
+*** regexp functions
+
+By default, Guile supports POSIX extended regular expressions. That
+means that the characters `(', `)', `+' and `?' are special, and must
+be escaped if you wish to match the literal characters.
+
+This regular expression interface was modeled after that implemented
+by SCSH, the Scheme Shell. It is intended to be upwardly compatible
+with SCSH regular expressions.
+
+**** Function: string-match PATTERN STR [START]
+ Compile the string PATTERN into a regular expression and compare
+ it with STR. The optional numeric argument START specifies the
+ position of STR at which to begin matching.
+
+ `string-match' returns a "match structure" which describes what,
+ if anything, was matched by the regular expression. *Note Match
+ Structures::. If STR does not match PATTERN at all,
+ `string-match' returns `#f'.
+
+ Each time `string-match' is called, it must compile its PATTERN
+argument into a regular expression structure. This operation is
+expensive, which makes `string-match' inefficient if the same regular
+expression is used several times (for example, in a loop). For better
+performance, you can compile a regular expression in advance and then
+match strings against the compiled regexp.
+
+**** Function: make-regexp STR [FLAGS]
+ Compile the regular expression described by STR, and return the
+ compiled regexp structure. If STR does not describe a legal
+ regular expression, `make-regexp' throws a
+ `regular-expression-syntax' error.
+
+ FLAGS may be the bitwise-or of one or more of the following:
+
+**** Constant: regexp/extended
+ Use POSIX Extended Regular Expression syntax when interpreting
+ STR. If not set, POSIX Basic Regular Expression syntax is used.
+ If the FLAGS argument is omitted, we assume regexp/extended.
+
+**** Constant: regexp/icase
+ Do not differentiate case. Subsequent searches using the
+ returned regular expression will be case insensitive.
+
+**** Constant: regexp/newline
+ Match-any-character operators don't match a newline.
+
+ A non-matching list ([^...]) not containing a newline matches a
+ newline.
+
+ Match-beginning-of-line operator (^) matches the empty string
+ immediately after a newline, regardless of whether the FLAGS
+ passed to regexp-exec contain regexp/notbol.
+
+ Match-end-of-line operator ($) matches the empty string
+ immediately before a newline, regardless of whether the FLAGS
+ passed to regexp-exec contain regexp/noteol.
+
+**** Function: regexp-exec REGEXP STR [START [FLAGS]]
+ Match the compiled regular expression REGEXP against `str'. If
+ the optional integer START argument is provided, begin matching
+ from that position in the string. Return a match structure
+ describing the results of the match, or `#f' if no match could be
+ found.
+
+ FLAGS may be the bitwise-or of one or more of the following:
+
+**** Constant: regexp/notbol
+ The match-beginning-of-line operator always fails to match (but
+ see the compilation flag regexp/newline above) This flag may be
+ used when different portions of a string are passed to
+ regexp-exec and the beginning of the string should not be
+ interpreted as the beginning of the line.
+
+**** Constant: regexp/noteol
+ The match-end-of-line operator always fails to match (but see the
+ compilation flag regexp/newline above)
+
+**** Function: regexp? OBJ
+ Return `#t' if OBJ is a compiled regular expression, or `#f'
+ otherwise.
+
+ Regular expressions are commonly used to find patterns in one string
+and replace them with the contents of another string.
+
+**** Function: regexp-substitute PORT MATCH [ITEM...]
+ Write to the output port PORT selected contents of the match
+ structure MATCH. Each ITEM specifies what should be written, and
+ may be one of the following arguments:
+
+ * A string. String arguments are written out verbatim.
+
+ * An integer. The submatch with that number is written.
+
+ * The symbol `pre'. The portion of the matched string preceding
+ the regexp match is written.
+
+ * The symbol `post'. The portion of the matched string
+ following the regexp match is written.
+
+ PORT may be `#f', in which case nothing is written; instead,
+ `regexp-substitute' constructs a string from the specified ITEMs
+ and returns that.
+
+**** Function: regexp-substitute/global PORT REGEXP TARGET [ITEM...]
+ Similar to `regexp-substitute', but can be used to perform global
+ substitutions on STR. Instead of taking a match structure as an
+ argument, `regexp-substitute/global' takes two string arguments: a
+ REGEXP string describing a regular expression, and a TARGET string
+ which should be matched against this regular expression.
+
+ Each ITEM behaves as in REGEXP-SUBSTITUTE, with the following
+ exceptions:
+
+ * A function may be supplied. When this function is called, it
+ will be passed one argument: a match structure for a given
+ regular expression match. It should return a string to be
+ written out to PORT.
+
+ * The `post' symbol causes `regexp-substitute/global' to recurse
+ on the unmatched portion of STR. This *must* be supplied in
+ order to perform global search-and-replace on STR; if it is
+ not present among the ITEMs, then `regexp-substitute/global'
+ will return after processing a single match.
+
+*** Match Structures
+
+ A "match structure" is the object returned by `string-match' and
+`regexp-exec'. It describes which portion of a string, if any, matched
+the given regular expression. Match structures include: a reference to
+the string that was checked for matches; the starting and ending
+positions of the regexp match; and, if the regexp included any
+parenthesized subexpressions, the starting and ending positions of each
+submatch.
+
+ In each of the regexp match functions described below, the `match'
+argument must be a match structure returned by a previous call to
+`string-match' or `regexp-exec'. Most of these functions return some
+information about the original target string that was matched against a
+regular expression; we will call that string TARGET for easy reference.
+
+**** Function: regexp-match? OBJ
+ Return `#t' if OBJ is a match structure returned by a previous
+ call to `regexp-exec', or `#f' otherwise.
+
+**** Function: match:substring MATCH [N]
+ Return the portion of TARGET matched by subexpression number N.
+ Submatch 0 (the default) represents the entire regexp match. If
+ the regular expression as a whole matched, but the subexpression
+ number N did not match, return `#f'.
+
+**** Function: match:start MATCH [N]
+ Return the starting position of submatch number N.
+
+**** Function: match:end MATCH [N]
+ Return the ending position of submatch number N.
+
+**** Function: match:prefix MATCH
+ Return the unmatched portion of TARGET preceding the regexp match.
+
+**** Function: match:suffix MATCH
+ Return the unmatched portion of TARGET following the regexp match.
+
+**** Function: match:count MATCH
+ Return the number of parenthesized subexpressions from MATCH.
+ Note that the entire regular expression match itself counts as a
+ subexpression, and failed submatches are included in the count.
+
+**** Function: match:string MATCH
+ Return the original TARGET string.
+
+*** Backslash Escapes
+
+ Sometimes you will want a regexp to match characters like `*' or `$'
+exactly. For example, to check whether a particular string represents
+a menu entry from an Info node, it would be useful to match it against
+a regexp like `^* [^:]*::'. However, this won't work; because the
+asterisk is a metacharacter, it won't match the `*' at the beginning of
+the string. In this case, we want to make the first asterisk un-magic.
+
+ You can do this by preceding the metacharacter with a backslash
+character `\'. (This is also called "quoting" the metacharacter, and
+is known as a "backslash escape".) When Guile sees a backslash in a
+regular expression, it considers the following glyph to be an ordinary
+character, no matter what special meaning it would ordinarily have.
+Therefore, we can make the above example work by changing the regexp to
+`^\* [^:]*::'. The `\*' sequence tells the regular expression engine
+to match only a single asterisk in the target string.
+
+ Since the backslash is itself a metacharacter, you may force a
+regexp to match a backslash in the target string by preceding the
+backslash with itself. For example, to find variable references in a
+TeX program, you might want to find occurrences of the string `\let\'
+followed by any number of alphabetic characters. The regular expression
+`\\let\\[A-Za-z]*' would do this: the double backslashes in the regexp
+each match a single backslash in the target string.
+
+**** Function: regexp-quote STR
+ Quote each special character found in STR with a backslash, and
+ return the resulting string.
+
+ *Very important:* Using backslash escapes in Guile source code (as
+in Emacs Lisp or C) can be tricky, because the backslash character has
+special meaning for the Guile reader. For example, if Guile encounters
+the character sequence `\n' in the middle of a string while processing
+Scheme code, it replaces those characters with a newline character.
+Similarly, the character sequence `\t' is replaced by a horizontal tab.
+Several of these "escape sequences" are processed by the Guile reader
+before your code is executed. Unrecognized escape sequences are
+ignored: if the characters `\*' appear in a string, they will be
+translated to the single character `*'.
+
+ This translation is obviously undesirable for regular expressions,
+since we want to be able to include backslashes in a string in order to
+escape regexp metacharacters. Therefore, to make sure that a backslash
+is preserved in a string in your Guile program, you must use *two*
+consecutive backslashes:
+
+ (define Info-menu-entry-pattern (make-regexp "^\\* [^:]*"))
+
+ The string in this example is preprocessed by the Guile reader before
+any code is executed. The resulting argument to `make-regexp' is the
+string `^\* [^:]*', which is what we really want.
+
+ This also means that in order to write a regular expression that
+matches a single backslash character, the regular expression string in
+the source code must include *four* backslashes. Each consecutive pair
+of backslashes gets translated by the Guile reader to a single
+backslash, and the resulting double-backslash is interpreted by the
+regexp engine as matching a single backslash character. Hence:
+
+ (define tex-variable-pattern (make-regexp "\\\\let\\\\=[A-Za-z]*"))
+
+ The reason for the unwieldiness of this syntax is historical. Both
+regular expression pattern matchers and Unix string processing systems
+have traditionally used backslashes with the special meanings described
+above. The POSIX regular expression specification and ANSI C standard
+both require these semantics. Attempting to abandon either convention
+would cause other kinds of compatibility problems, possibly more severe
+ones. Therefore, without extending the Scheme reader to support
+strings with different quoting conventions (an ungainly and confusing
+extension when implemented in other languages), we must adhere to this
+cumbersome escape syntax.
+
+* Changes to the gh_ interface
+
+* Changes to the scm_ interface
+
+* Changes to system call interfaces:
+
+** The value returned by `raise' is now unspecified. It throws an exception
+if an error occurs.
+
+*** A new procedure `sigaction' can be used to install signal handlers
+
+(sigaction signum [action] [flags])
+
+signum is the signal number, which can be specified using the value
+of SIGINT etc.
+
+If action is omitted, sigaction returns a pair: the CAR is the current
+signal hander, which will be either an integer with the value SIG_DFL
+(default action) or SIG_IGN (ignore), or the Scheme procedure which
+handles the signal, or #f if a non-Scheme procedure handles the
+signal. The CDR contains the current sigaction flags for the handler.
+
+If action is provided, it is installed as the new handler for signum.
+action can be a Scheme procedure taking one argument, or the value of
+SIG_DFL (default action) or SIG_IGN (ignore), or #f to restore
+whatever signal handler was installed before sigaction was first used.
+Flags can optionally be specified for the new handler (SA_RESTART is
+always used if the system provides it, so need not be specified.) The
+return value is a pair with information about the old handler as
+described above.
+
+This interface does not provide access to the "signal blocking"
+facility. Maybe this is not needed, since the thread support may
+provide solutions to the problem of consistent access to data
+structures.
+
+*** A new procedure `flush-all-ports' is equivalent to running
+`force-output' on every port open for output.
+
+** Guile now provides information on how it was built, via the new
+global variable, %guile-build-info. This variable records the values
+of the standard GNU makefile directory variables as an assocation
+list, mapping variable names (symbols) onto directory paths (strings).
+For example, to find out where the Guile link libraries were
+installed, you can say:
+
+guile -c "(display (assq-ref %guile-build-info 'libdir)) (newline)"
+
+
+* Changes to the scm_ interface
+
+** The new function scm_handle_by_message_noexit is just like the
+existing scm_handle_by_message function, except that it doesn't call
+exit to terminate the process. Instead, it prints a message and just
+returns #f. This might be a more appropriate catch-all handler for
+new dynamic roots and threads.
+
+\f
+Changes in Guile 1.1 (released Friday, May 16 1997):
* Changes to the distribution.
date, or incomplete. As soon as we have current documentation, we
will distribute it.
+
+
* Changes to the stand-alone interpreter
** guile now accepts command-line arguments compatible with SCSH, Olin
take new optional START and END arguments, specifying the region of
the array to read and write.
-*** The `ungetc-char-ready?' function has been removed.
+*** The `ungetc-char-ready?' function has been removed. We feel it's
+inappropriate for an interface to expose implementation details this
+way.
** Changes to the Unix library and system call interface
HCoop / bpt / guile.git / blobdiff