X-Git-Url: http://git.hcoop.net/bpt/emacs.git/blobdiff_plain/a1a7207a13168b6231e46ee44b39c661fd0c6128..e59fe83bff7290cf5543e73752d65c71c1c23a16:/Makefile.in diff --git a/Makefile.in b/Makefile.in index 45a41133a8..7b78f9c025 100644 --- a/Makefile.in +++ b/Makefile.in @@ -22,7 +22,7 @@ # `make distclean' should leave only the files that were in the # distribution. # -# make realclean +# make maintainer-clean # Delete everything from the current directory that can be # reconstructed with this Makefile. This typically includes # everything deleted by distclean, plus more: C source files @@ -44,6 +44,8 @@ C_SWITCH_SYSTEM=@c_switch_system@ ALLOCA=@ALLOCA@ LN_S=@LN_S@ CFLAGS=@CFLAGS@ +LDFLAGS=@LDFLAGS@ +CPPFLAGS=@CPPFLAGS@ C_SWITCH_X_SITE=@C_SWITCH_X_SITE@ LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@ YACC=@YACC@ @@ -59,9 +61,6 @@ version=@version@ ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'. configuration=@configuration@ -### Libraries which should be edited into lib-src/Makefile. -libsrc_libs=@libsrc_libs@ - # ==================== Where To Install Things ==================== # The default location for installation. Everything is placed in @@ -82,19 +81,19 @@ bindir=@bindir@ datadir=@datadir@ # Where to install and expect the files that Emacs modifies as it -# runs. These files are all architecture-independent. Right now, the -# only such data is the locking directory; ${lockdir} is a -# subdirectory of this. -statedir=@statedir@ +# runs. These files are all architecture-independent. +# Right now, this is not used. +sharedstatedir=@sharedstatedir@ # Where to install and expect executable files to be run by Emacs # rather than directly by users, and other architecture-dependent # data. ${archlibdir} is a subdirectory of this. -libdir=@libdir@ +libexecdir=@libexecdir@ # Where to install Emacs's man pages, and what extension they should have. mandir=@mandir@ manext=.1 +man1dir=$(mandir)/man1 # Where to install and expect the info files describing Emacs. In the # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but @@ -102,6 +101,9 @@ manext=.1 # system, it is inappropriate to imply that it is part of Emacs. infodir=@infodir@ +# Where to look for bitmap files. +bitmapdir=@bitmapdir@ + # Where to find the source code. The source code for Emacs's C kernel is # expected to be in ${srcdir}/src, and the source code for Emacs's # utility programs is expected to be in ${srcdir}/lib-src. This is @@ -111,6 +113,9 @@ srcdir=@srcdir@ # Tell make where to find source files; this is needed for the makefiles. VPATH=@srcdir@ +# Where to find the application default. +x_default_search_path=@x_default_search_path@ + # ==================== Emacs-specific directories ==================== # These variables hold the values Emacs will actually use. They are @@ -138,7 +143,8 @@ lisppath=@lisppath@ # building. This is only used during the process of # compiling Emacs, to help Emacs find its lisp files # before they've been installed in their final location. -# It's usually identical to lisppath, except that the +# It's usually identical to lisppath, except that +# it does not include locallisppath, and the # entry for the directory containing the installed lisp # files has been replaced with ../lisp. This should be a # colon-separated list of directories. @@ -152,11 +158,6 @@ buildlisppath=${srcdir}/lisp # at once. etcdir=@etcdir@ -# Where to create and expect the locking directory, where -# the Emacs locking code keeps track of which files are -# currently being edited. -lockdir=@lockdir@ - # Where to put executables to be run by Emacs rather than # the user. This path usually includes the Emacs version # and configuration name, so that multiple configurations @@ -173,6 +174,9 @@ docdir=@docdir@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ +INSTALL_INFO = install-info +# By default, we uphold the dignity of our programs. +INSTALL_STRIP = # ============================= Targets ============================== @@ -182,45 +186,46 @@ EMACS = emacs # Subdirectories to make recursively. `lisp' is not included # because the compiled lisp files are part of the distribution # and you cannot remake them without installing Emacs first. -SUBDIR = lib-src src +SUBDIR = lib-src src leim # The makefiles of the directories in $SUBDIR. -SUBDIR_MAKEFILES = lib-src/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile +SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile # Subdirectories to install, and where they'll go. # lib-src's makefile knows how to install it, so we don't do that here. +# leim's makefile also knows how to install it, so we don't do that here. # When installing the info files, we need to do special things to # avoid nuking an existing dir file, so we don't do that here; # instead, we have written out explicit code in the `install' targets. COPYDIR = ${srcdir}/etc ${srcdir}/lisp COPYDESTS = ${etcdir} ${lispdir} -all: src/paths.h ${SUBDIR} +all: ${SUBDIR} -removenullpaths=sed -e 's/^://' -e 's/:$$//' -e 's/::/:/' +removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g' -# We force the rebuilding of src/paths.h because the user might give -# make different values for the various directories. Since we use -# move-if-change, src/paths.h only actually changes if the user did -# something notable, so the only unnecessary work we do is in building -# src/paths.h.tmp, which isn't much. -# Note that sed is not in /bin on 386bsd. -src/paths.h: Makefile ${srcdir}/src/paths.h.in FRC.src.paths.h - @echo "Producing \`src/paths.h' from \`src/paths.h.in'." +# Generate paths.h from paths.in. This target is invoked by `configure'. +paths-force: FRC @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ - sed < ${srcdir}/src/paths.h.in > src/paths.h.tmp \ + x_default_search_path=`echo ${x_default_search_path}`; \ + sed < ${srcdir}/src/paths.in > paths.h.$$$$ \ -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \ -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \ -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \ - -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \ - -e 's;\(#.*PATH_LOCK\).*$$;\1 "${lockdir}/";') - @${srcdir}/move-if-change src/paths.h.tmp src/paths.h + -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \ + -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \ + -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \ + ${srcdir}/move-if-change paths.h.$$$$ src/paths.h -src: lib-src FRC.src -lib-src: FRC.lib-src +# For parallel make, src should be build before leim. +leim: src + +src: lib-src FRC + +lib-src: FRC src/config.stamp .RECURSIVE: ${SUBDIR} @@ -229,21 +234,35 @@ ${SUBDIR}: ${SUBDIR_MAKEFILES} FRC CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' +blessmail: ${SUBDIR_MAKEFILES} src FRC + cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \ + MAKE='${MAKE}' archlibdir='$(archlibdir)' + Makefile: Makefile.in config.status ./config.status -src/Makefile: src/Makefile.in.in config.status +src/Makefile: src/Makefile.in config.status + ./config.status + +src/config.stamp: src/config.in config.status ./config.status + touch src/config.stamp lib-src/Makefile: lib-src/Makefile.in config.status ./config.status +man/Makefile: man/Makefile.in config.status + ./config.status + oldXMenu/Makefile: oldXMenu/Makefile.in config.status ./config.status lwlib/Makefile: lwlib/Makefile.in config.status ./config.status +leim/Makefile: leim/Makefile.in config.status + ./config.status + # ==================== Installation ==================== ## If we let lib-src do its own installation, that means we @@ -260,79 +279,152 @@ lwlib/Makefile: lwlib/Makefile.in config.status ## place with their files read-only (perhaps because they are checked ## into RCS). In order to make this safe, we make sure that the ## source exists and is distinct from the destination. -## We don't depend on `all', but rather on ${SUBDIR}, so that we won't -## ever modify src/paths.h. -install: ${SUBDIR} install-arch-dep install-arch-indep; - -### Note that we copy the DOC-* files from the build etc directory -### as well as lots of things from ${srcdir}/etc. - -## The docfile isn't really architecture-dependent, but we want to -## install it along with the version of Emacs that it's keyed to. -install-arch-dep: mkdir install-doc +### We do install-arch-indep first because +### the executable needs the Lisp files and DOC file to work properly. +install: all install-arch-indep install-arch-dep install-leim blessmail + @true + +### Install the executables that were compiled specifically for this machine. +### It would be nice to do something for a parallel make +### to ensure that install-arch-indep finishes before this starts. +install-arch-dep: mkdir (cd lib-src; \ $(MAKE) install $(MFLAGS) prefix=${prefix} \ - exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \ - archlibdir=${archlibdir}) - ${INSTALL_PROGRAM} src/emacs ${bindir}/emacs-${version} + exec_prefix=${exec_prefix} bindir=${bindir} \ + libexecdir=${libexecdir} archlibdir=${archlibdir} \ + INSTALL_STRIP=${INSTALL_STRIP}) + ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/emacs-${version} -chmod 1755 ${bindir}/emacs-${version} rm -f ${bindir}/$(EMACS) -ln ${bindir}/emacs-${version} ${bindir}/$(EMACS) -install-doc: mkdir - if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \ - then \ - echo "Copying etc/DOC* ..." ; \ - (cd etc; tar -cf - DOC*)|(cd ${docdir}; umask 0; tar -xvf - ); \ - else true; fi +### Install the files that are machine-independent. +### Most of them come straight from the distribution; +### the exception is the DOC-* files, which are copied +## from the build directory. +## Note that we copy DOC* and then delete DOC +## as a workaround for a bug in tar on Ultrix 4.2. install-arch-indep: mkdir -set ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - if [ `(cd $$1 && pwd)` != `(cd $${dir} && pwd)` ] ; then \ - rm -rf $$1 ; \ - fi ; \ - shift ; \ - done + for dir in ${COPYDIR} ; do \ + if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \ + rm -rf $$1 ; \ + fi ; \ + shift ; \ + done -set ${COPYDESTS} ; \ - mkdir ${COPYDESTS} ; \ - for dir in ${COPYDIR} ; do \ - dest=$$1 ; shift ; \ - [ -d $${dir} ] \ - && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \ - && (echo "Copying $${dir}..." ; \ - (cd $${dir}; tar -cf - . )|(cd $${dest};umask 022; tar -xvf - ); \ - for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ - rm -rf $${subdir}/RCS ; \ - rm -rf $${subdir}/CVS ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/*~ ; \ - done) ; \ - done - thisdir=`pwd`; \ + mkdir ${COPYDESTS} ; \ + chmod ugo+rx ${COPYDESTS} ; \ + for dir in ${COPYDIR} ; do \ + dest=$$1 ; shift ; \ + [ -d $${dir} ] \ + && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \ + && (echo "Copying $${dir} to $${dest}..." ; \ + (cd $${dir}; tar -cf - . ) \ + |(cd $${dest};umask 022; tar -xvf - && cat > /dev/null); \ + for subdir in `find $${dest} -type d ! -name RCS -print` ; do \ + chmod a+rx $${subdir} ; \ + rm -rf $${subdir}/RCS ; \ + rm -rf $${subdir}/CVS ; \ + rm -f $${subdir}/\#* ; \ + rm -f $${subdir}/.\#* ; \ + rm -f $${subdir}/*~ ; \ + rm -f $${subdir}/*.orig ; \ + rm -f $${subdir}/[mM]akefile* ; \ + rm -f $${subdir}/ChangeLog* ; \ + rm -f $${subdir}/dired.todo ; \ + done) ; \ + done + -rm -f ${lispdir}/subdirs.el + $(srcdir)/update-subdirs ${lispdir} + if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \ + then true; \ + else \ + (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ + echo " (normal-top-level-add-subdirs-to-load-path))") \ + > ${datadir}/emacs/${version}/site-lisp/subdirs.el; \ + fi + chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el + -if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \ + then true; \ + else \ + (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \ + echo " (normal-top-level-add-subdirs-to-load-path))") \ + > ${datadir}/emacs/site-lisp/subdirs.el; \ + fi + -chmod a+r ${datadir}/emacs/site-lisp/subdirs.el + if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \ + then \ + echo "Copying etc/DOC-* to ${docdir} ..." ; \ + (cd ./etc; tar -cf - DOC*) \ + |(cd ${docdir}; umask 0; tar -xvf - && cat > /dev/null); \ + (cd $(docdir); chmod a+r DOC*; rm DOC); \ + else true; fi + if [ -r ./lisp ] \ + && [ -r ./lisp/simple.el ] \ + && [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \ + && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \ + then \ + echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \ + (cd lisp; tar -cf - *.el *.elc) \ + |(cd ${lispdir}; umask 0; tar -xvf - && cat > /dev/null); \ + else true; fi + thisdir=`/bin/pwd`; \ if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ then \ - (cd ${srcdir}/info ; \ - if [ ! -f ${infodir}/dir ] && [ -f dir ]; then \ - (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir); \ - fi ; \ - for f in cl* emacs* forms* gnus* info* sc* vip* ; do \ - (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f); \ + (cd ${infodir}; \ + if [ -f dir ]; then true; \ + else \ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \ + chmod a+r ${infodir}/dir); \ + fi; \ + cd ${srcdir}/info ; \ + for f in ccmode* cl* customize* dired-x* ediff* emacs* forms* gnus* info* message* mh-e* reftex* sc* vip* widget*; do \ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \ + chmod a+r ${infodir}/$$f); \ done); \ else true; fi - thisdir=`pwd`; cd ${srcdir}/etc; for page in emacs etags ctags ; do \ - (cd $${thisdir}; ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext}); \ + -thisdir=`/bin/pwd`; \ + if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \ + then \ + for f in ccmode cl customize dired-x ediff emacs forms gnus info message mh-e reftex sc vip widget; do \ + (cd $${thisdir}; \ + ${INSTALL_INFO} --dir-file=${infodir}/dir --info-file=${infodir}/$$f); \ + done; \ + else true; fi + -chmod -R a+r ${COPYDESTS} ${infodir} + thisdir=`/bin/pwd`; \ + cd ${srcdir}/etc; \ + for page in emacs etags ctags ; do \ + (cd $${thisdir}; \ + ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \ + chmod a+r ${man1dir}/$${page}${manext}); \ done +### Install LEIM files. Although they are machine-independent, we +### have separate target here instead of including it in +### `install-arch-indep'. People who extracted LEIM files after they +### insalled Emacs itself can install only LEIM files by this target. +install-leim: leim/Makefile mkdir + cd leim; $(MAKE) install + +### Build Emacs and install it, stripping binaries while installing them. +install-strip: + $(MAKE) INSTALL_STRIP=-s + ### Build all the directories we're going to install Emacs in. Since ### we may be creating several layers of directories (for example, -### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use make-path -### instead of mkdir. Not all systems' mkdirs have the `-p' flag. -mkdir: FRC.mkdir - ./lib-src/make-path ${COPYDESTS} ${lockdir} ${infodir} ${mandir} \ - ${bindir} ${datadir} ${docdir} ${libdir} \ - `echo ${locallisppath} | sed 's/:/ /'` - -chmod 777 ${lockdir} +### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs +### instead of mkdir. Not all systems' mkdir programs have the `-p' flag. +mkdir: FRC + $(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \ + ${bindir} ${datadir} ${docdir} ${libexecdir} \ + ${datadir}/emacs/site-lisp \ + ${datadir}/emacs/${version}/site-lisp \ + `echo ${locallisppath} | sed 's/:/ /g'` ### Delete all the installed files that the `install' target would ### create (but not the noninstalled files such as `make all' would @@ -343,43 +435,43 @@ uninstall: (cd lib-src; \ $(MAKE) $(MFLAGS) uninstall \ prefix=${prefix} exec_prefix=${exec_prefix} \ - bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir}) + bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}) for dir in ${lispdir} ${etcdir} ; do \ - case `(cd $${dir} ; pwd)` in \ - `(cd ${srcdir} ; pwd)`* ) ;; \ - * ) rm -rf $${dir} ;; \ - esac ; \ - case $${dir} in \ - ${datadir}/emacs/${version}/* ) \ - rm -rf ${datadir}/emacs/${version} \ - ;; \ - esac ; \ + if [ -d $${dir} ]; then \ + case `(cd $${dir} ; /bin/pwd)` in \ + `(cd ${srcdir} ; /bin/pwd)`* ) ;; \ + * ) rm -rf $${dir} ;; \ + esac ; \ + case $${dir} in \ + ${datadir}/emacs/${version}/* ) \ + rm -rf ${datadir}/emacs/${version} \ + ;; \ + esac ; \ + fi ; \ done - (cd ${infodir}; rm -f cl* emacs* forms* info* vip*) - (cd ${mandir}; rm -f emacs.1 etags.1 ctags.1) - (cd ${bindir}; rm -f emacs-${version} emacs) + (cd ${infodir} && rm -f cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*) + (cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1) + (cd ${bindir} && rm -f emacs-${version} $(EMACS)) -### Some makes seem to remember that they've built something called FRC, -### so you can only use a given FRC once per makefile. -FRC FRC.src.paths.h FRC.src FRC.lib-src FRC.mkdir: -FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean: +FRC: # ==================== Cleaning up and miscellanea ==================== -.PHONY: mostlyclean clean distclean realclean extraclean +.PHONY: mostlyclean clean distclean maintainer-clean extraclean ### `mostlyclean' ### Like `clean', but may refrain from deleting a few files that people ### normally don't want to recompile. For example, the `mostlyclean' ### target for GCC does not delete `libgcc.a', because recompiling it ### is rarely necessary and takes a lot of time. -mostlyclean: FRC.mostlyclean +mostlyclean: FRC (cd src; $(MAKE) $(MFLAGS) mostlyclean) (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean) (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean) (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean) - -(cd man; $(MAKE) $(MFLAGS) mostlyclean) + -(cd man && $(MAKE) $(MFLAGS) mostlyclean) + (cd leim; $(MAKE) $(MFLAGS) mostlyclean) ### `clean' ### Delete all files from the current directory that are normally @@ -389,12 +481,13 @@ mostlyclean: FRC.mostlyclean ### with them. ### ### Delete `.dvi' files here if they are not part of the distribution. -clean: FRC.clean +clean: FRC (cd src; $(MAKE) $(MFLAGS) clean) (cd oldXMenu; $(MAKE) $(MFLAGS) clean) (cd lwlib; $(MAKE) $(MFLAGS) clean) (cd lib-src; $(MAKE) $(MFLAGS) clean) - -(cd man; $(MAKE) $(MFLAGS) clean) + -(cd man && $(MAKE) $(MFLAGS) clean) + (cd leim; $(MAKE) $(MFLAGS) clean) ### `distclean' ### Delete all files from the current directory that are created by @@ -403,35 +496,36 @@ clean: FRC.clean ### `make distclean' should leave only the files that were in the ### distribution. top_distclean=\ - rm -f config.status build-install ; \ + rm -f config.status config.cache config.log ; \ rm -f Makefile ${SUBDIR_MAKEFILES} ; \ - (cd lock ; rm -f *) -distclean: FRC.distclean + if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi +distclean: FRC (cd src; $(MAKE) $(MFLAGS) distclean) (cd oldXMenu; $(MAKE) $(MFLAGS) distclean) (cd lwlib; $(MAKE) $(MFLAGS) distclean) (cd lib-src; $(MAKE) $(MFLAGS) distclean) - (cd man; $(MAKE) $(MFLAGS) distclean) + (cd man && $(MAKE) $(MFLAGS) distclean) + (cd leim; $(MAKE) $(MFLAGS) distclean) ${top_distclean} - -### `realclean' +### `maintainer-clean' ### Delete everything from the current directory that can be ### reconstructed with this Makefile. This typically includes ### everything deleted by distclean, plus more: C source files ### produced by Bison, tags tables, info files, and so on. ### -### One exception, however: `make realclean' should not delete +### One exception, however: `make maintainer-clean' should not delete ### `configure' even if `configure' can be remade using a rule in the -### Makefile. More generally, `make realclean' should not delete +### Makefile. More generally, `make maintainer-clean' should not delete ### anything that needs to exist in order to run `configure' and then ### begin to build the program. -realclean: FRC.realclean - (cd src; $(MAKE) $(MFLAGS) realclean) - (cd oldXMenu; $(MAKE) $(MFLAGS) realclean) - (cd lwlib; $(MAKE) $(MFLAGS) realclean) - (cd lib-src; $(MAKE) $(MFLAGS) realclean) - -(cd man; $(MAKE) $(MFLAGS) realclean) +maintainer-clean: FRC + (cd src; $(MAKE) $(MFLAGS) maintainer-clean) + (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean) + (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean) + (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean) + -(cd man && $(MAKE) $(MFLAGS) maintainer-clean) + (cd leim; $(MAKE) $(MFLAGS) maintainer-clean) ${top_distclean} ### This doesn't actually appear in the coding standards, but Karl @@ -440,8 +534,8 @@ realclean: FRC.realclean ### it deletes backup and autosave files too. extraclean: for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done - -(cd lock; rm *) - -rm config.status config-tmp-* + ${top_distclean} + -rm config-tmp-* -rm -f *~ \#* ### Unlocking and relocking. The idea of these productions is to reduce @@ -454,13 +548,13 @@ extraclean: ### Note: it's no disaster if these productions miss a file or two; tar ### and VC will swiftly let you know if this happens, and it is easily ### corrected. -SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \ - README build-install.in configure make-dist move-if-change +SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in \ + README configure make-dist move-if-change .PHONY: unlock relock unlock: - chmod u+w $(SOURCES) cpp/* + chmod u+w $(SOURCES) -(cd elisp; chmod u+w Makefile README *.texi) (cd etc; $(MAKE) $(MFLAGS) unlock) (cd lib-src; $(MAKE) $(MFLAGS) unlock) @@ -472,7 +566,7 @@ unlock: (cd src; $(MAKE) $(MFLAGS) unlock) relock: - chmod u-w $(SOURCES) cpp/* + chmod u-w $(SOURCES) -(cd elisp; chmod u-w Makefile README *.texi) (cd etc; $(MAKE) $(MFLAGS) relock) (cd lib-src; $(MAKE) $(MFLAGS) relock) @@ -483,9 +577,10 @@ relock: (cd lwlib; chmod u+w *.[ch] Makefile README) (cd src; $(MAKE) $(MFLAGS) relock) -TAGS tags: lib-src - (cd ${srcdir}/src; \ - ../lib-src/etags *.[ch] ../lisp/*.el ../lisp/term/*.el) +TAGS tags: lib-src src + # The src subdir knows how to do the right thing + # even when the build directory and source dir are different. + cd src; $(MAKE) tags check: @echo "We don't have any tests for GNU Emacs yet." @@ -496,6 +591,9 @@ dist: .PHONY: info dvi dist check force-info: info: force-info - (cd ${srcdir}/man; $(MAKE) $(MFLAGS) info) + # Note that man/Makefile knows how to + # put the info files in $(srcdir), + # so we can do ok running make in the build dir. + (cd man; $(MAKE) $(MFLAGS) info) dvi: - (cd ${srcdir}/man; $(MAKE) $(MFLAGS) dvi) + (cd man; $(MAKE) $(MFLAGS) dvi)