X-Git-Url: http://git.hcoop.net/bpt/emacs.git/blobdiff_plain/4c54abe198bf9f412a8add28b9caf68e9f1f40d7..ed8d7fcaa2965216d44388fd00a757c8d55e7395:/Makefile.in diff --git a/Makefile.in b/Makefile.in index 5c76cbb500..a2de4f3b16 100644 --- a/Makefile.in +++ b/Makefile.in @@ -2,7 +2,7 @@ # DIST: make most of the changes to this file you might want, so try # DIST: that first. -# Copyright (C) 1992-2012 Free Software Foundation, Inc. +# Copyright (C) 1992-2013 Free Software Foundation, Inc. # This file is part of GNU Emacs. @@ -66,10 +66,8 @@ CDPATH= # ==================== Things `configure' Might Edit ==================== -MAINTAINER_MODE_FLAG = --disable-maintainer-mode -@MAINT@MAINTAINER_MODE_FLAG = --enable-maintainer-mode cache_file = @cache_file@ -CONFIGURE_FLAGS = --cache-file=$(cache_file) $(MAINTAINER_MODE_FLAG) +CONFIGURE_FLAGS = --cache-file=$(cache_file) CC=@CC@ CFLAGS=@CFLAGS@ @@ -181,22 +179,27 @@ iconsrcdir=$(srcdir)/etc/images/icons # These variables hold the values Emacs will actually use. They are # based on the values of the standard Make variables above. -# Where to install the lisp files distributed with +# Where to install the lisp, leim files distributed with # Emacs. This includes the Emacs version, so that the # lisp files for different versions of Emacs will install # themselves in separate directories. lispdir=@lispdir@ +leimdir=@leimdir@ -# Directories Emacs should search for lisp files specific -# to this site (i.e. customizations), before consulting -# ${lispdir}. This should be a colon-separated list of -# directories. +# Directories Emacs should search for standard lisp files. +# The default is ${lispdir}:${leimdir}. +standardlisppath=@standardlisppath@ + +# Directories Emacs should search for lisp files specific to this +# site (i.e. customizations), before consulting ${standardlisppath}. +# This should be a colon-separated list of directories. locallisppath=@locallisppath@ # Where Emacs will search to find its lisp files. Before # changing this, check to see if your purpose wouldn't # better be served by changing locallisppath. This # should be a colon-separated list of directories. +# The default is ${locallisppath}:${standardlisppath}. lisppath=@lisppath@ # Where Emacs will search for its lisp files while @@ -243,6 +246,7 @@ INSTALL_INFO = @INSTALL_INFO@ # By default, we uphold the dignity of our programs. INSTALL_STRIP = MKDIR_P = @MKDIR_P@ +LN_S = @LN_S@ # We use gzip to compress installed .el files. GZIP_PROG = @GZIP_PROG@ @@ -255,17 +259,12 @@ GZIP_INFO = @GZIP_INFO@ TRANSFORM = @program_transform_name@ # What emacs should be called when installed. -EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'` -EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'` +EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'` +EMACS = ${EMACS_NAME}${EXEEXT} +EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT} -# Subdirectories to make recursively. `lisp' is not included -# because the compiled lisp files are part of the distribution. -# leim is not included because it needs special handling. -# -# Actually, we now include `lisp' as well, since the compiled files -# are not included any more in case of bootstrap or in case Emacs was -# checked out from a VCS. -SUBDIR = lib lib-src src lisp +# Subdirectories to make recursively. +SUBDIR = lib lib-src src lisp leim # The subdir makefiles created by config.status. SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@ @@ -273,28 +272,31 @@ SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'` # Subdirectories to install, and where they'll go. # lib-src's makefile knows how to install it, so we don't do that here. -# leim's makefile also knows how to install it, so we don't do that here. -# When installing the info files, we need to do special things to -# avoid nuking an existing dir file, so we don't do that here; -# instead, we have written out explicit code in the `install' targets. -COPYDIR = ${srcdir}/etc ${srcdir}/lisp -COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} +# Directories that cannot simply be copied, eg info, +# are treated separately. +# quail appears twice because in out-of-tree builds, it exists twice. +COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail +COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail + +all: ${SUBDIR} -all: ${SUBDIR} leim +.PHONY: all ${SUBDIR} blessmail epaths-force FRC removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g' # Generate epaths.h from epaths.in. This target is invoked by `configure'. -# See comments in configure.in for why it is done this way, as opposed +# See comments in configure.ac for why it is done this way, as opposed # to just letting configure generate epaths.h from epaths.in in a # similar way to how Makefile is made from Makefile.in. epaths-force: FRC - @(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \ - buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \ + @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \ + locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \ + buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \ x_default_search_path=`echo ${x_default_search_path}`; \ gamedir=`echo ${gamedir}`; \ sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \ - -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";' \ + -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \ + -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \ -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \ -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \ -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \ @@ -305,62 +307,17 @@ epaths-force: FRC -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \ ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h -# For parallel make, src should be built before leim. -# "export PARALLEL=0" is for SGI's Make, to prevent it from -# running more than 1 process in the leim directory, especially for -# the $TIT files there. -leim: src Makefile FRC - cd leim && PARALLEL=0 $(MAKE) all $(MFLAGS) - lib-src src: lib src: lib-src FRC -.RECURSIVE: ${SUBDIR} leim - -# We need to build `emacs' in `src' to compile the *.elc files in `lisp'. -lisp: src - -# Maintainers can put a copy of gnulib into $(gnulib_srcdir). -gnulib_srcdir = ../gnulib -$(gnulib_srcdir): - git clone git://git.savannah.gnu.org/gnulib.git $@ - -# A shorter name that satisfies MS-DOS 8+3 constraints. -DOS_gnulib_comp.m4 = gl-comp.m4 - -# Update modules from gnulib, for maintainers, who should have it in -# $(gnulib_srcdir) (relative to $(srcdir) and should have build tools -# as per $(gnulib_srcdir)/DEPENDENCIES. -GNULIB_MODULES = \ - alloca-opt \ - careadlinkat crypto/md5 crypto/sha1 crypto/sha256 crypto/sha512 dtoastr \ - dup2 \ - filemode getloadavg getopt-gnu ignore-value intprops lstat \ - manywarnings mktime pthread_sigmask readlink \ - socklen stdarg stdio strftime strtoimax strtoumax symlink sys_stat \ - warnings -GNULIB_TOOL_FLAGS = \ - --avoid=msvc-inval --avoid=msvc-nothrow \ - --avoid=raise --avoid=threadlib \ - --conditional-dependencies --import --no-changelog --no-vc-files \ - --makefile-name=gnulib.mk -sync-from-gnulib: $(gnulib_srcdir) - -cd $(srcdir)/m4 && cp $(DOS_gnulib_comp.m4) gnulib-comp.m4 - cd $(srcdir) && \ - $(gnulib_srcdir)/gnulib-tool $(GNULIB_TOOL_FLAGS) $(GNULIB_MODULES) - cd $(srcdir)/m4 && rm gnulib-cache.m4 warn-on-use.m4 - cd $(srcdir)/m4 && mv gnulib-comp.m4 $(DOS_gnulib_comp.m4) - cp $(gnulib_srcdir)/build-aux/texinfo.tex $(srcdir)/doc/misc - cp \ - $(gnulib_srcdir)/build-aux/move-if-change \ - $(srcdir)/build-aux - cd $(srcdir) && autoreconf -i -I m4 -.PHONY: sync-from-gnulib +# We need to build `emacs' in `src' to compile the *.elc files in `lisp' +# and `leim'. +lisp leim: src # These targets should be "${SUBDIR} without `src'". -lib lib-src lisp: Makefile FRC - cd $@; $(MAKE) all $(MFLAGS) \ +lib lib-src lisp leim: Makefile FRC + cd $@ && $(MAKE) all $(MFLAGS) \ CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \ LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' @@ -389,38 +346,52 @@ src: Makefile FRC VCSWITNESS="$$vcswitness" blessmail: Makefile src FRC - cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \ + cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \ MAKE='${MAKE}' archlibdir='$(archlibdir)' # We used to have one rule per */Makefile.in, but that leads to race # conditions with parallel makes, so let's assume that the time stamp on # ./Makefile is representative of the time stamp on all the other Makefiles. -Makefile: config.status $(srcdir)/src/config.in \ - $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) - ./config.status +# +# config.status overrides MAKEFILE_NAME with a bogus name when creating +# src/epaths.h, so that 'make epaths-force' does not recursively invoke +# config.status and overwrite config.status while executing it (Bug#11214). +# +# 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but +# then attempts to build that file. This forces 'Makefile', 'lib/Makefile', +# etc. to be built without running into similar recursion problems. +MAKEFILE_NAME = Makefile +$(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \ + $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk + MAKE='$(MAKE)' ./config.status -# Don't erase config.status if make is interrupted while refreshing it. -.PRECIOUS: config.status +# Don't erase these files if make is interrupted while refreshing them. +.PRECIOUS: Makefile config.status config.status: ${srcdir}/configure ${srcdir}/lisp/version.el if [ -x ./config.status ]; then \ ./config.status --recheck; \ else \ - ./configure $(CONFIGURE_FLAGS); \ + $(srcdir)/configure $(CONFIGURE_FLAGS); \ fi -AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/aclocal.m4 +AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4 $(srcdir)/configure: $(AUTOCONF_INPUTS) cd ${srcdir} && autoconf -ACLOCAL_INPUTS = @MAINT@ $(srcdir)/m4/$(DOS_gnulib_comp.m4) +ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS) cd $(srcdir) && aclocal -I m4 -AUTOMAKE_INPUTS = @MAINT@ $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am $(srcdir)/lib/gnulib.mk +AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \ + $(srcdir)/lib/gnulib.mk $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS) cd $(srcdir) && automake --gnu -a -c lib/Makefile + +# Regenerate files that this makefile would have made, if this makefile +# had been built by Automake. The name 'am--refresh' is for +# compatibility with subsidiary Automake-generated makefiles. am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in .PHONY: am--refresh @@ -437,26 +408,21 @@ $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS) # ==================== Installation ==================== +.PHONY: install install-arch-dep install-arch-indep install-doc install-info +.PHONY: install-man install-etc install-strip uninstall + ## If we let lib-src do its own installation, that means we ## don't have to duplicate the list of utilities to install in ## this Makefile as well. -## On AIX, use tar xBf. -## On Xenix, use tar xpf. - -.PHONY: install mkdir - -## We delete each directory in ${COPYDESTS} before we copy into it; -## that way, we can reinstall over directories that have been put in -## place with their files read-only (perhaps because they are checked -## into RCS). In order to make this safe, we make sure that the -## source exists and is distinct from the destination. -### We do install-arch-indep first because -### the executable needs the Lisp files and DOC file to work properly. -install: all install-arch-indep install-arch-dep install-leim blessmail +install: all install-arch-indep install-doc install-arch-dep blessmail @true ## Ensure that $subdir contains a subdirs.el file. +## Here and elsewhere, we set the umask so that any created files are +## world-readable. +## TODO it might be good to warn about non-standard permissions of +## pre-existing directories, but that does not seem easy. write_subdir=if [ -f $${subdir}/subdirs.el ]; \ then true; \ else \ @@ -468,21 +434,22 @@ write_subdir=if [ -f $${subdir}/subdirs.el ]; \ fi ### Install the executables that were compiled specifically for this machine. -### It would be nice to do something for a parallel make -### to ensure that install-arch-indep finishes before this starts. -### (TODO Why would it be nice? Why not just make this depend on -### install-arch-indep then?) -install-arch-dep: mkdir - (cd lib-src; \ +### We do install-arch-indep first because the executable needs the +### Lisp files and DOC file to work properly. +install-arch-dep: src install-arch-indep install-doc + umask 022; ${MKDIR_P} $(DESTDIR)${bindir} + cd lib-src && \ $(MAKE) install $(MFLAGS) prefix=${prefix} \ exec_prefix=${exec_prefix} bindir=${bindir} \ libexecdir=${libexecdir} archlibdir=${archlibdir} \ - INSTALL_STRIP=${INSTALL_STRIP}) + INSTALL_STRIP=${INSTALL_STRIP} if test "${ns_self_contained}" = "no"; then \ ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \ - chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) ; \ - rm -f $(DESTDIR)${bindir}/$(EMACS) ; \ - ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS) || true ; \ + chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \ + if test "x${NO_BIN_LINK}" = x; then \ + rm -f $(DESTDIR)${bindir}/$(EMACS) ; \ + cd $(DESTDIR)${bindir} && $(LN_S) $(EMACSFULL) $(EMACS); \ + fi; \ else \ subdir=${ns_appresdir}/site-lisp; \ ${write_subdir} || exit 1; \ @@ -490,10 +457,13 @@ install-arch-dep: mkdir fi ## In the share directory, we are deleting: -## applications (with emacs.desktop) -## emacs (basically empty) +## applications (with emacs.desktop, also found in etc/) +## emacs (basically empty except for unneeded site-lisp directories) ## icons (duplicates etc/images/icons/hicolor) -## man (maybe we should be installing this one, like info) + +## This is install-etc for everything except self-contained-ns builds. +## For them, it is empty. +INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@ ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html ## Needs to be the user running install, so configure can't set it. @@ -503,75 +473,116 @@ set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \ done ### Install the files that are machine-independent. -### Most of them come straight from the distribution; -### the exception is the DOC-* files, which are copied -### from the build directory. - -## Note that we copy DOC* and then delete DOC -## as a workaround for a bug in tar on Ultrix 4.2. -## Ultrix is no longer supported since 23.1, but the relevant line -## has another effect. We copy the entire etc/ directory from the -## source tree first. For an in-tree build, this will include -## any DOC* files there may be. So rm DOC does have an effect. -## FIXME When we copy etc we should exclude DOC*, then copy only -## the relevant one. We cannot delete DOC* from the destination directory, -## because that may include pre-existing files from another emacs. +### Most of them come straight from the distribution; the exception is +### the DOC file, which is copied from the build directory. -## We install only the relevant DOC file if possible -## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*. -## (Note "otherwise" is inaccurate since 2009-08-23.) +## We delete each directory in ${COPYDESTS} before we copy into it; +## that way, we can reinstall over directories that have been put in +## place with their files read-only (perhaps because they are checked +## into RCS). In order to make this safe, we make sure that the +## source exists and is distinct from the destination. -## If people complain about the h flag in tar command, take that out. -## That flag is also used in leim/Makefile.in +## We delete etc/DOC* because there may be irrelevant DOC files from +## other builds in the source directory. This is ok because we just +## deleted the entire installed etc/ directory and recreated it. +## install-doc installs the relevant DOC. ## Note that the Makefiles in the etc directory are potentially useful ## in an installed Emacs, so should not be excluded. -install-arch-indep: mkdir info install-etc - -set ${COPYDESTS} ; \ - unset CDPATH; \ - for dir in ${COPYDIR} ; do \ - if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \ - rm -rf $$1 ; \ - fi ; \ - shift ; \ +## I'm not sure creating locallisppath here serves any useful purpose. +## If it has the default value, then the later write_subdir commands +## will ensure all these components exist. +## This will only do something if locallisppath has a non-standard value. +## Is it really Emacs's job to create those directories? +## Should we also be ensuring they contain subdirs.el files? +## It would be easy to do, just use write_subdir. + +## Note that we use tar instead of plain old cp -R/-r because the latter +## is apparently not portable (even in 2012!). +## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html +## I have no idea which platforms Emacs supports where cp -R does not +## work correctly, and therefore no idea when tar can be replaced. +## See also these comments from 2004 about cp -r working fine: +## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html +install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA} + umask 022 ; \ + locallisppath='${locallisppath}'; \ + IFS=:; \ + for d in $$locallisppath; do \ + ${MKDIR_P} "$(DESTDIR)$$d"; \ done -set ${COPYDESTS} ; \ - mkdir ${COPYDESTS} ; \ - chmod ugo+rx ${COPYDESTS} ; \ unset CDPATH; \ $(set_installuser); \ for dir in ${COPYDIR} ; do \ + [ -d $${dir} ] || exit 1 ; \ dest=$$1 ; shift ; \ - [ -d $${dir} ] \ - && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \ - && (echo "Copying $${dir} to $${dest}..." ; \ - (cd $${dir}; tar -chf - . ) \ - | (cd $${dest}; umask 022; \ - tar -xvf - && cat > /dev/null) || exit 1; \ - find $${dest} -exec chown $${installuser} {} ';' ;\ - for subdir in `find $${dest} -type d -print` ; do \ - chmod a+rx $${subdir} ; \ - rm -f $${subdir}/.gitignore ; \ - rm -f $${subdir}/.arch-inventory ; \ - rm -f $${subdir}/.DS_Store ; \ - rm -f $${subdir}/\#* ; \ - rm -f $${subdir}/.\#* ; \ - rm -f $${subdir}/*~ ; \ - rm -f $${subdir}/*.orig ; \ - [ "$${dir}" != "${srcdir}/etc" ] && \ - rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \ - rm -f $${subdir}/ChangeLog* ; \ - done) ; \ + [ -d $${dest} ] && \ + [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \ + continue ; \ + if [ "$${dir}" = "leim/quail" ]; then \ + [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \ + continue ; \ + else \ + rm -rf $${dest} ; \ + umask 022; ${MKDIR_P} $${dest} ; \ + fi ; \ + echo "Copying $${dir} to $${dest}..." ; \ + (cd $${dir}; tar -chf - . ) \ + | (cd $${dest}; umask 022; \ + tar -xvf - && cat > /dev/null) || exit 1; \ + [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \ + for subdir in `find $${dest} -type d -print` ; do \ + chmod a+rx $${subdir} ; \ + rm -f $${subdir}/.gitignore ; \ + rm -f $${subdir}/.arch-inventory ; \ + rm -f $${subdir}/.DS_Store ; \ + rm -f $${subdir}/\#* ; \ + rm -f $${subdir}/.\#* ; \ + rm -f $${subdir}/*~ ; \ + rm -f $${subdir}/*.orig ; \ + rm -f $${subdir}/ChangeLog* ; \ + [ "$${dir}" != "${srcdir}/etc" ] && \ + rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \ + done ; \ + find $${dest} -exec chown $${installuser} {} ';' ;\ done + -rm -f $(DESTDIR)${leimdir}/leim-list.el + ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el -rm -f $(DESTDIR)${lispdir}/subdirs.el - $(srcdir)/update-subdirs $(DESTDIR)${lispdir} + umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir} subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \ ${write_subdir} subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \ ${write_subdir} || true + [ -z "${GZIP_PROG}" ] || \ + ( echo "Compressing *.el ..." ; \ + unset CDPATH; \ + thisdir=`/bin/pwd`; \ + for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \ + cd $${thisdir} ; \ + cd $${dir} || exit 1 ; \ + for f in `find . -name "*.elc" -print`; do \ + ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \ + done ; \ + done ) + -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS} + +## The above chmods are needed because "umask 022; tar ..." is not +## guaranteed to do the right thing; eg if we are root and tar is +## preserving source permissions. + +## We install only the relevant DOC file if possible +## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*. +## (Note "otherwise" is inaccurate since 2009-08-23.) + +## Note that install-arch-indep deletes and recreates the entire +## installed etc/ directory, so we need it to run before this does. +install-doc: src install-arch-indep -unset CDPATH; \ - if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \ + umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \ + if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \ then \ fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \ if [ -f "./etc/DOC-$${fullversion}" ]; \ @@ -582,116 +593,95 @@ install-arch-indep: mkdir info install-etc fi; \ echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \ ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \ - (cd $(DESTDIR)$(docdir); \ - $(set_installuser); \ - chown $${installuser} DOC*; \ - if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \ - else true; fi - -unset CDPATH; \ - if [ -n "${GZIP_PROG}" ]; \ - then \ - echo "Compressing *.el ..." ; \ - (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \ - ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \ - done) \ + $(set_installuser); \ + chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \ else true; fi + +install-info: info + umask 022; ${MKDIR_P} $(DESTDIR)${infodir} -unset CDPATH; \ thisdir=`/bin/pwd`; \ - if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \ - then \ + [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \ (cd $(DESTDIR)${infodir}; \ - if [ -f dir ]; then true; \ - else \ + [ -f dir ] || \ (cd $${thisdir}; \ - ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \ - chmod a+r $(DESTDIR)${infodir}/dir); \ - fi; \ - info_misc=`cd $${thisdir}/doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \ + ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \ + info_misc=`cd $${thisdir}/doc/misc; ${MAKE} -s echo-info`; \ cd ${srcdir}/info ; \ for elt in ${INFO_NONMISC} $${info_misc}; do \ test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \ for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \ (cd $${thisdir}; \ ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \ - chmod a+r $(DESTDIR)${infodir}/$$f; \ - if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \ - rm -f $(DESTDIR)${infodir}/$$f.gz; \ - ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \ - else true; fi; \ + ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \ + rm -f $(DESTDIR)${infodir}/$$f.gz; \ + ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \ done; \ (cd $${thisdir}; \ ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \ - done); \ - else true; fi - -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS} + done) + +install-man: + umask 022; ${MKDIR_P} $(DESTDIR)${man1dir} thisdir=`/bin/pwd`; \ cd ${mansrcdir}; \ for page in *.1; do \ + dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \ (cd $${thisdir}; \ - ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \ - chmod a+r $(DESTDIR)${man1dir}/$${page}; \ - if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \ - rm -f $(DESTDIR)${man1dir}/$${page}.gz; \ - ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${page}; \ - else true; fi ); \ + ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \ + ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \ + rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \ + ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest}; \ done ## Install those items from etc/ that need to end up elsewhere. -install-etc: mkdir - ${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \ - $(DESTDIR)${desktopdir}/emacs.desktop - for icon in $(iconsrcdir)/*/*/apps/*.* \ - $(iconsrcdir)/*/*/mimetypes/*.*; do \ - if [ -r $${icon} ]; then \ - iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \ - ${INSTALL_DATA} $${icon} $${iicon} ; \ - fi ; \ - done -### Install LEIM files. Although they are machine-independent, we -### have separate target here instead of including it in -### `install-arch-indep'. People who extracted LEIM files after they -### installed Emacs itself can install only LEIM files by this target. -install-leim: leim/Makefile mkdir - cd leim && $(MAKE) $(MFLAGS) install +## If you prefer, choose "emacs22" at installation time. +## Note: emacs22 does not have all the resolutions. +EMACS_ICON=emacs + +install-etc: + umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir} + tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \ + emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \ + sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \ + -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \ + ${srcdir}/etc/emacs.desktop > $${tmp}; \ + ${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \ + rm -f $${tmp} + thisdir=`/bin/pwd`; \ + cd ${iconsrcdir} || exit 1; umask 022 ; \ + for dir in */*/apps */*/mimetypes; do \ + [ -d $${dir} ] || continue ; \ + ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \ + for icon in $${dir}/${EMACS_ICON}[.-]*; do \ + [ -r $${icon} ] || continue ; \ + ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \ + dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \ + ( cd $${thisdir}; \ + ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \ + || exit 1; \ + done ; \ + done ### Build Emacs and install it, stripping binaries while installing them. install-strip: $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install -### Build some of the directories we're going to install Emacs in. -### We set the umask so that any created directories are world-readable. -### FIXME it would be good to warn about non-standard permissions of -### pre-existing directories, but that does not seem easy. -mkdir: FRC - icondirs= ; \ - for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \ - if [ -d $${dir} ]; then \ - icondirs="$${icondirs} $${dir}" ; \ - fi ; \ - done ; \ - icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \ - umask 022 ; \ - $(MKDIR_P) $(DESTDIR)${datadir} ${COPYDESTS} \ - $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \ - $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \ - $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \ - $(DESTDIR)${desktopdir} $${icondirs} - ### Delete all the installed files that the `install' target would ### create (but not the noninstalled files such as `make all' would create). ### ### Don't delete the lisp and etc directories if they're in the source tree. uninstall: - (cd lib-src; \ + cd lib-src && \ $(MAKE) $(MFLAGS) uninstall \ prefix=${prefix} exec_prefix=${exec_prefix} \ - bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}) + bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir} -unset CDPATH; \ for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \ if [ -d $${dir} ]; then \ - case `(cd $${dir} ; /bin/pwd)` in \ - `(cd ${srcdir} ; /bin/pwd)`* ) ;; \ + case `cd $${dir} ; /bin/pwd` in \ + `cd ${srcdir} ; /bin/pwd`* ) ;; \ * ) rm -rf $${dir} ;; \ esac ; \ case $${dir} in \ @@ -703,22 +693,29 @@ uninstall: done -rm -rf $(DESTDIR)${libexecdir}/emacs/${version} thisdir=`/bin/pwd`; \ - (info_misc=`cd doc/misc; ${MAKE} echo-info | sed '/ing directory/d'`; \ - cd $(DESTDIR)${infodir} && \ - for elt in ${INFO_NONMISC} $${info_misc}; do \ - (cd $${thisdir}; \ - $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \ - if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \ - ext=.gz; else ext=; fi; \ - rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \ - done;) + (info_misc=`cd doc/misc; ${MAKE} -s echo-info`; \ + if cd $(DESTDIR)${infodir}; then \ + for elt in ${INFO_NONMISC} $${info_misc}; do \ + (cd $${thisdir}; \ + $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \ + if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \ + ext=.gz; else ext=; fi; \ + rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \ + done; \ + fi) (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \ ext=.gz; else ext=; fi; \ - cd ${mansrcdir} && for page in *.1; do \ - rm -f $(DESTDIR)${man1dir}/$$page$$ext; done ) - (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS)) - (cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg ) - -rm -f $(DESTDIR)${desktopdir}/emacs.desktop + if cd ${mansrcdir}; then \ + for page in *.1; do \ + rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \ + fi) + (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true) + (if cd $(DESTDIR)${icondir}; then \ + rm -f hicolor/*x*/apps/${EMACS_NAME}.png \ + hicolor/scalable/apps/${EMACS_NAME}.svg \ + hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \ + fi) + -rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop for file in snake-scores tetris-scores; do \ file=$(DESTDIR)${gamedir}/$${file}; \ [ -s $${file} ] || rm -f $$file; \ @@ -728,7 +725,7 @@ FRC: # ==================== Cleaning up and miscellanea ==================== -.PHONY: mostlyclean clean distclean maintainer-clean extraclean +.PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean ### `mostlyclean' ### Like `clean', but may refrain from deleting a few files that people @@ -756,6 +753,7 @@ mostlyclean: FRC ### ### Delete `.dvi' files here if they are not part of the distribution. clean: FRC + -rm -f etc/emacs.tmpdesktop (cd src; $(MAKE) $(MFLAGS) clean) (cd oldXMenu; $(MAKE) $(MFLAGS) clean) (cd lwlib; $(MAKE) $(MFLAGS) clean) @@ -766,6 +764,7 @@ clean: FRC -(cd doc/lispref && $(MAKE) $(MFLAGS) clean) -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean) (cd leim; $(MAKE) $(MFLAGS) clean) + (cd nextstep && $(MAKE) $(MFLAGS) clean) ### `bootclean' ### Delete all files that need to be remade for a clean bootstrap. @@ -792,6 +791,7 @@ distclean: FRC (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean) (cd leim; $(MAKE) $(MFLAGS) distclean) (cd lisp; $(MAKE) $(MFLAGS) distclean) + (cd nextstep && $(MAKE) $(MFLAGS) distclean) ${top_distclean} ### `bootstrap-clean' @@ -809,10 +809,9 @@ bootstrap-clean: FRC -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean) (cd leim; $(MAKE) $(MFLAGS) maintainer-clean) (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean) + (cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean) [ ! -f config.log ] || mv -f config.log config.log~ ${top_bootclean} -## configure; make bootstrap replaces the real config.log from configure -## with the truncated one from config.status. The former is more useful. ### `maintainer-clean' ### Delete everything from the current directory that can be @@ -838,13 +837,14 @@ maintainer-clean: bootstrap-clean FRC ### the coding standards seem to come from. It's like distclean, but ### it deletes backup and autosave files too. extraclean: - for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done + for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done ${top_maintainer_clean} -rm -f config-tmp-* -rm -f *~ \#* # The src subdir knows how to do the right thing # even when the build directory and source dir are different. +.PHONY: TAGS tags TAGS tags: lib lib-src src cd src; $(MAKE) $(MFLAGS) tags @@ -859,7 +859,7 @@ check: dist: cd ${srcdir}; ./make-dist -.PHONY: info dvi dist check html +.PHONY: info dvi dist check html info-real force-info check-info-dir info-real: (cd doc/emacs; $(MAKE) $(MFLAGS) info) @@ -917,14 +917,14 @@ dvi: .PHONY: bootstrap -## configure; make bootstrap replaces the real config.log from configure -## with the truncated one from config.status. The former is more useful. +# Bootstrapping does the following: +# * Remove files to start from a bootstrap-clean slate. +# * Run autogen.sh, falling back on copy_autogen if autogen.sh fails. +# * Rebuild Makefile, to update the build procedure itself. +# * Do the actual build. bootstrap: bootstrap-clean FRC - if [ -x ./config.status ]; then \ - ./config.status; \ - else \ - ./configure $(CONFIGURE_FLAGS); \ - fi + cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; } + $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile $(MAKE) $(MFLAGS) info all .PHONY: check-declare